// SPDX-License-Identifier: GPL-2.0 // Copyright (c) 2021 Inspur Corporation /dts-v1/; #include "aspeed-g5.dtsi" #include #include #include / { model = "NF5280M6 BMC"; compatible = "inspur,nf5280m6-bmc", "aspeed,ast2500"; chosen { stdout-path = &uart5; bootargs = "console=ttyS4,115200 earlycon"; }; memory@80000000 { reg = <0x80000000 0x40000000>; }; reserved-memory { #address-cells = <1>; #size-cells = <1>; ranges; vga_memory: framebuffer@9f000000 { no-map; reg = <0x9f000000 0x01000000>; /* 16M */ }; video_engine_memory: jpegbuffer { size = <0x02000000>; /* 32M */ alignment = <0x01000000>; compatible = "shared-dma-pool"; reusable; }; }; leds { compatible = "gpio-leds"; bmc_alive { label = "bmc_alive"; gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>; linux,default-trigger = "timer"; led-pattern = <1000 1000>; }; front-fan { label = "front-fan"; gpios = <&gpio ASPEED_GPIO(F,2) GPIO_ACTIVE_LOW>; }; front-psu { label = "front-psu"; gpios = <&gpio ASPEED_GPIO(F,3) GPIO_ACTIVE_LOW>; }; front-syshot { label = "front-syshot"; gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>; }; front-memory { label = "front-memory"; gpios = <&gpio ASPEED_GPIO(S, 7) GPIO_ACTIVE_LOW>; }; identify { label = "identify"; gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>; }; }; iio-hwmon { compatible = "iio-hwmon"; io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>; }; }; &fmc { status = "okay"; flash@0 { status = "okay"; m25p,fast-read; label = "bmc"; spi-max-frequency = <50000000>; #include "openbmc-flash-layout.dtsi" }; }; &spi1 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1_default>; flash@0 { status = "okay"; m25p,fast-read; label = "bios"; spi-max-frequency = <100000000>; }; }; &uart1 { status = "okay"; }; &uart5 { status = "okay"; }; &mac0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, <&syscon ASPEED_CLK_MAC1RCLK>; clock-names = "MACCLK", "RCLK"; use-ncsi; }; &mac1 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; }; &gpio { status = "okay"; /* Enable GPIOE0 and GPIOE2 pass-through by default */ pinctrl-names = "pass-through"; pinctrl-0 = <&pinctrl_gpie0_default &pinctrl_gpie2_default>; gpio-line-names = /*A0-A7*/ "","MAC2LINK","BMC_RESET_CPLD","","BMC_SCL9","","MAC2MDC_R","", /*B0-B7*/ "BMC_INIT_OK","FM_SKU_ID2","FM_SPD_DDRCPU_LVLSHFT_DIS_R_N", "FM_CPU_MSMI_CATERR_LVT3_BMC_N","","FM_CPU0_PROCHOT_LVT3_N", "FM_CPU_MEM_THERMTRIP_LVT3_N","BIOS_LOAD_DEFAULT_R_N", /*C0-C7*/ "","","","","","","","", /*D0-D7*/ "","BMC_SD2CMD","BMC_SD2DAT0","BMC_SD2DAT1","BMC_SD2DAT2", "BMC_SD2DAT3","BMC_SD2DET","BMC_SD2WPT", /*E0-E7*/ "FM_BOARD_ID0","FM_BOARD_ID1","FM_BOARD_ID2","FM_BOARD_ID3", "FM_BOARD_ID4","FM_BOARD_ID5","","", /*F0-F7*/ "PSU1_PRESENT_N","PSU2_PRESENT_N","FAN_FAULT_LED_N","PSU_FAULT_LED_N", "BIOS_DEBUG_MODE_N","FP_LCD_RESET","FAN_TYPE_SEL", "RST_GLB_RST_WARN_N", /*G0-G7*/ "IRQ_LPTM21L_ALERT_N","IRQ_PLD_ALERT_N","AC_FAIL_N","FP_LCD_PRESENT_BMC", "BMC_JTAG_TCK_MUX_SEL","BMC_BIOS_RESERVED","SYS_NMI_N","BMC_NMI_N", /*H0-H7*/ "JTAG_BMC_TDI","JTAG_BMC_TDO","JTAG_BMC_TCK","JTAG_BMC_TMS","FM_BOARD_ID6", "FM_SKU_ID0","IRQ_SML1_PMBUS_ALERT_N","IRQ_SML0_ALERT_MUX_N", /*I0-I7*/ "FM_CPU_ERR0_LVT3_BMC_N","FM_CPU_ERR1_LVT3_BMC_N","FM_BMC_PCH_SCI_LPC_N", "FM_SYS_THROTTLE_LVC3","SPI2_PCH_CS0_N","","","", /*J0-J7*/ "FM_CPU0_SKTOCC_LVT3_N","FM_CPU1_SKTOCC_LVT3_N","","SYSHOT_FAULT_LED_N", "VGA_HSYNC","VGA_VSYNC","","", /*K0-K7*/ "","","","","","","","", /*L0-L7*/ "","","","","","","SYS_UART_TXD1","SYS_UART_RXD1", /*M0-M7*/ "","","","","","","","", /*N0-N7*/ "","","","","","","","", /*O0-O7*/ "","","","","","","","", /*P0-P7*/ "","","","","","","","", /*Q0-Q7*/ "","","","","","","FM_PCH_BMC_THERMTRIP_N","INTRUDER_N", /*R0-R7*/ "SPI_BMC_BOOT_CS1_R_N","FM_CPU_MEMHOT_LVC3_N", "DBP_CPU_PREQ_N","FM_CPU_ERR2_LVT3_BMC_N", "RISER_NCSI_EN_N","","LOM_NCSI_EN_N","OCP_NCSI_EN_N", /*S0-S7*/ "BMC_XDP_PRDY_N","SIO_POWER_GOOD","BMC_PWR_DEBUG_R_N","BMC_DEBUG_EN_R_N","", "GPIOS5_BMC","","GPIOS7_BMC", /*T0-T7*/ "","","","","","","","", /*U0-U7*/ "","","","","","","","", /*V0-V7*/ "","","","","","","","", /*W0-W7*/ "","","","","","","","", /*X0-X7*/ "","","","","","","","", /*Y0-Y7*/ "","BMC_DET_UID_N","BMC_JTAG_SEL","SIO_ONCONTROL","","","","", /*Z0-Z7*/ "XDP_PRESENT_N","DBP_SYSPWROK","BMC_JTAG_SEL","FM_SMI_ACTIVE_N","", "GPIOZ5","","", /*AA0-AA7*/ "FP_BMC_SYSLED_N","PS_PWROK","RST_PLTRST_BMC_N","HDA_SDO_BMC", "FM_SLPS4_R_N","","POWER_BUTTON","POWER_OUT", /*AB0-AB7*/ "RESET_OUT","RESET_BUTTON","BIOS_REFLASH","POST_COMPLETE","","","","", /*AC0-AC7*/ "","","","","","","",""; }; &i2c0 { /* FP_LCD */ status = "okay"; }; &i2c1 { status = "okay"; eeprom@50 { compatible = "atmel,24c256"; reg = <0x50>; label = "fru"; }; }; &i2c2 { status = "okay"; tmp112@48 { compatible = "ti,tmp112"; reg = <0x48>; label = "inlet"; }; tmp112@49 { compatible = "ti,tmp112"; reg = <0x49>; label = "outlet"; }; pca9548@70 { compatible = "nxp,pca9548"; reg = <0x70>; }; }; &i2c3 { status = "okay"; pca9548@70 { compatible = "nxp,pca9548"; reg = <0x70>; }; pca9548@71 { compatible = "nxp,pca9548"; reg = <0x71>; }; pca9548@72 { compatible = "nxp,pca9548"; reg = <0x72>; }; }; &i2c4 { /* IPMB */ status = "okay"; }; &i2c5 { status = "okay"; pca9548@70 { compatible = "nxp,pca9548"; reg = <0x70>; }; }; &i2c6 { status = "okay"; pca9548@70 { compatible = "nxp,pca9548"; reg = <0x70>; }; }; &i2c7 { status = "okay"; adm1278@33 { compatible = "adi,adm1293"; reg = <0x33>; }; adm1278@32 { compatible = "adi,adm1293"; reg = <0x32>; }; adm1278@20 { compatible = "adi,adm1293"; reg = <0x20>; }; }; &i2c8 { status = "okay"; pca0: pca9555@23 { compatible = "nxp,pca9555"; reg = <0x23>; #address-cells = <1>; #size-cells = <0>; gpio-controller; #gpio-cells = <2>; gpio@0 { reg = <0>; type = ; }; gpio@1 { reg = <1>; type = ; }; gpio@2 { reg = <2>; type = ; }; gpio@3 { reg = <3>; type = ; }; gpio@4 { reg = <4>; type = ; }; gpio@5 { reg = <5>; type = ; }; gpio@6 { reg = <6>; type = ; }; }; pca1: pca9555@22 { compatible = "nxp,pca9555"; reg = <0x22>; #address-cells = <1>; #size-cells = <0>; gpio-controller; #gpio-cells = <2>; gpio@0 { reg = <0>; type = ; }; gpio@1 { reg = <1>; type = ; }; gpio@2 { reg = <2>; type = ; }; gpio@3 { reg = <3>; type = ; }; gpio@4 { reg = <4>; type = ; }; gpio@5 { reg = <5>; type = ; }; gpio@6 { reg = <6>; type = ; }; gpio@7 { reg = <7>; type = ; }; }; pca2: pca9555@20 { compatible = "nxp,pca9555"; reg = <0x20>; #address-cells = <1>; #size-cells = <0>; gpio-controller; #gpio-cells = <2>; gpio@0 { reg = <0>; type = ; }; gpio@1 { reg = <1>; type = ; }; gpio@2 { reg = <2>; type = ; }; gpio@3 { reg = <3>; type = ; }; gpio@4 { reg = <4>; type = ; }; gpio@5 { reg = <5>; type = ; }; gpio@6 { reg = <6>; type = ; }; gpio@7 { reg = <7>; type = ; }; }; pca3: pca9555@21 { compatible = "nxp,pca9555"; reg = <0x21>; #address-cells = <1>; #size-cells = <0>; gpio-controller; #gpio-cells = <2>; gpio@0 { reg = <0>; type = ; }; gpio@1 { reg = <1>; type = ; }; gpio@2 { reg = <2>; type = ; }; gpio@3 { reg = <3>; type = ; }; gpio@4 { reg = <4>; type = ; }; gpio@5 { reg = <5>; type = ; }; gpio@6 { reg = <6>; type = ; }; gpio@7 { reg = <7>; type = ; }; }; }; &i2c9 { /* cpld */ status = "okay"; }; &i2c10 { status = "okay"; pca4: pca9555@24 { compatible = "nxp,pca9555"; reg = <0x24>; #address-cells = <1>; #size-cells = <0>; gpio-controller; #gpio-cells = <2>; gpio@0 { reg = <0>; type = ; }; gpio@1 { reg = <1>; type = ; }; gpio@2 { reg = <2>; type = ; }; gpio@3 { reg = <3>; type = ; }; gpio@4 { reg = <4>; type = ; }; gpio@5 { reg = <5>; type = ; }; gpio@6 { reg = <6>; type = ; }; gpio@7 { reg = <7>; type = ; }; }; pca5: pca9555@25 { compatible = "nxp,pca9555"; reg = <0x25>; #address-cells = <1>; #size-cells = <0>; gpio-controller; #gpio-cells = <2>; gpio@0 { reg = <0>; type = ; }; gpio@1 { reg = <1>; type = ; }; gpio@2 { reg = <2>; type = ; }; gpio@3 { reg = <3>; type = ; }; gpio@4 { reg = <4>; type = ; }; gpio@5 { reg = <5>; type = ; }; gpio@6 { reg = <6>; type = ; }; }; }; &i2c11 { status = "okay"; power-supply@58 { compatible = "inspur,ipsps1"; reg = <0x58>; }; power-supply@59 { compatible = "inspur,ipsps1"; reg = <0x59>; }; }; &i2c12 { status = "okay"; }; &i2c13 { status = "okay"; }; &pwm_tacho { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default &pinctrl_pwm2_default &pinctrl_pwm3_default &pinctrl_pwm4_default &pinctrl_pwm5_default &pinctrl_pwm6_default &pinctrl_pwm7_default>; fan@0 { reg = <0x00>; aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>; }; fan@1 { reg = <0x01>; aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>; }; fan@2 { reg = <0x02>; aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>; }; fan@3 { reg = <0x03>; aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>; }; fan@4 { reg = <0x04>; aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>; }; fan@5 { reg = <0x05>; aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>; }; fan@6 { reg = <0x06>; aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>; }; fan@7 { reg = <0x07>; aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>; }; }; &kcs3 { status = "okay"; aspeed,lpc-io-reg = <0xca2>; }; &kcs4 { status = "okay"; aspeed,lpc-io-reg = <0xca4>; }; &adc { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default &pinctrl_adc14_default &pinctrl_adc15_default>; }; &vhub { status = "okay"; }; &video { status = "okay"; memory-region = <&video_engine_memory>; }; &vuart { status = "okay"; };