# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/snps,dw-pcie-ep.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Synopsys DesignWare PCIe endpoint interface

maintainers:
  - Jingoo Han <jingoohan1@gmail.com>
  - Gustavo Pimentel <gustavo.pimentel@synopsys.com>

description: |
  Synopsys DesignWare PCIe host controller endpoint

allOf:
  - $ref: /schemas/pci/pci-ep.yaml#

properties:
  compatible:
    anyOf:
      - {}
      - const: snps,dw-pcie-ep

  reg:
    description: |
      It should contain Data Bus Interface (dbi) and config registers for all
      versions.
      For designware core version >= 4.80, it may contain ATU address space.
    minItems: 2
    maxItems: 4

  reg-names:
    minItems: 2
    maxItems: 4
    items:
      enum: [dbi, dbi2, config, atu, addr_space, link, atu_dma, appl]

  reset-gpio:
    description: GPIO pin number of PERST# signal
    maxItems: 1
    deprecated: true

  reset-gpios:
    description: GPIO controlled connection to PERST# signal
    maxItems: 1

  snps,enable-cdm-check:
    type: boolean
    description: |
      This is a boolean property and if present enables
      automatic checking of CDM (Configuration Dependent Module) registers
      for data corruption. CDM registers include standard PCIe configuration
      space registers, Port Logic registers, DMA and iATU (internal Address
      Translation Unit) registers.

  num-ib-windows:
    description: number of inbound address translation windows
    maxItems: 1
    deprecated: true

  num-ob-windows:
    description: number of outbound address translation windows
    maxItems: 1
    deprecated: true

  max-functions:
    $ref: /schemas/types.yaml#/definitions/uint32
    description: maximum number of functions that can be configured

required:
  - reg
  - reg-names
  - compatible

unevaluatedProperties: false

examples:
  - |
    bus {
      #address-cells = <1>;
      #size-cells = <1>;
      pcie-ep@dfd00000 {
        compatible = "snps,dw-pcie-ep";
        reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
              <0xdfc01000 0x0001000>, /* IP registers 2 */
              <0xd0000000 0x2000000>; /* Configuration space */
        reg-names = "dbi", "dbi2", "addr_space";
      };
    };