Merge tag 'trace-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt...
[linux-2.6-microblaze.git] / include / linux / clk-provider.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  *  Copyright (c) 2010-2011 Jeremy Kerr <jeremy.kerr@canonical.com>
4  *  Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org>
5  */
6 #ifndef __LINUX_CLK_PROVIDER_H
7 #define __LINUX_CLK_PROVIDER_H
8
9 #include <linux/of.h>
10 #include <linux/of_clk.h>
11
12 /*
13  * flags used across common struct clk.  these flags should only affect the
14  * top-level framework.  custom flags for dealing with hardware specifics
15  * belong in struct clk_foo
16  *
17  * Please update clk_flags[] in drivers/clk/clk.c when making changes here!
18  */
19 #define CLK_SET_RATE_GATE       BIT(0) /* must be gated across rate change */
20 #define CLK_SET_PARENT_GATE     BIT(1) /* must be gated across re-parent */
21 #define CLK_SET_RATE_PARENT     BIT(2) /* propagate rate change up one level */
22 #define CLK_IGNORE_UNUSED       BIT(3) /* do not gate even if unused */
23                                 /* unused */
24                                 /* unused */
25 #define CLK_GET_RATE_NOCACHE    BIT(6) /* do not use the cached clk rate */
26 #define CLK_SET_RATE_NO_REPARENT BIT(7) /* don't re-parent on rate change */
27 #define CLK_GET_ACCURACY_NOCACHE BIT(8) /* do not use the cached clk accuracy */
28 #define CLK_RECALC_NEW_RATES    BIT(9) /* recalc rates after notifications */
29 #define CLK_SET_RATE_UNGATE     BIT(10) /* clock needs to run to set rate */
30 #define CLK_IS_CRITICAL         BIT(11) /* do not gate, ever */
31 /* parents need enable during gate/ungate, set rate and re-parent */
32 #define CLK_OPS_PARENT_ENABLE   BIT(12)
33 /* duty cycle call may be forwarded to the parent clock */
34 #define CLK_DUTY_CYCLE_PARENT   BIT(13)
35
36 struct clk;
37 struct clk_hw;
38 struct clk_core;
39 struct dentry;
40
41 /**
42  * struct clk_rate_request - Structure encoding the clk constraints that
43  * a clock user might require.
44  *
45  * @rate:               Requested clock rate. This field will be adjusted by
46  *                      clock drivers according to hardware capabilities.
47  * @min_rate:           Minimum rate imposed by clk users.
48  * @max_rate:           Maximum rate imposed by clk users.
49  * @best_parent_rate:   The best parent rate a parent can provide to fulfill the
50  *                      requested constraints.
51  * @best_parent_hw:     The most appropriate parent clock that fulfills the
52  *                      requested constraints.
53  *
54  */
55 struct clk_rate_request {
56         unsigned long rate;
57         unsigned long min_rate;
58         unsigned long max_rate;
59         unsigned long best_parent_rate;
60         struct clk_hw *best_parent_hw;
61 };
62
63 /**
64  * struct clk_duty - Struture encoding the duty cycle ratio of a clock
65  *
66  * @num:        Numerator of the duty cycle ratio
67  * @den:        Denominator of the duty cycle ratio
68  */
69 struct clk_duty {
70         unsigned int num;
71         unsigned int den;
72 };
73
74 /**
75  * struct clk_ops -  Callback operations for hardware clocks; these are to
76  * be provided by the clock implementation, and will be called by drivers
77  * through the clk_* api.
78  *
79  * @prepare:    Prepare the clock for enabling. This must not return until
80  *              the clock is fully prepared, and it's safe to call clk_enable.
81  *              This callback is intended to allow clock implementations to
82  *              do any initialisation that may sleep. Called with
83  *              prepare_lock held.
84  *
85  * @unprepare:  Release the clock from its prepared state. This will typically
86  *              undo any work done in the @prepare callback. Called with
87  *              prepare_lock held.
88  *
89  * @is_prepared: Queries the hardware to determine if the clock is prepared.
90  *              This function is allowed to sleep. Optional, if this op is not
91  *              set then the prepare count will be used.
92  *
93  * @unprepare_unused: Unprepare the clock atomically.  Only called from
94  *              clk_disable_unused for prepare clocks with special needs.
95  *              Called with prepare mutex held. This function may sleep.
96  *
97  * @enable:     Enable the clock atomically. This must not return until the
98  *              clock is generating a valid clock signal, usable by consumer
99  *              devices. Called with enable_lock held. This function must not
100  *              sleep.
101  *
102  * @disable:    Disable the clock atomically. Called with enable_lock held.
103  *              This function must not sleep.
104  *
105  * @is_enabled: Queries the hardware to determine if the clock is enabled.
106  *              This function must not sleep. Optional, if this op is not
107  *              set then the enable count will be used.
108  *
109  * @disable_unused: Disable the clock atomically.  Only called from
110  *              clk_disable_unused for gate clocks with special needs.
111  *              Called with enable_lock held.  This function must not
112  *              sleep.
113  *
114  * @save_context: Save the context of the clock in prepration for poweroff.
115  *
116  * @restore_context: Restore the context of the clock after a restoration
117  *              of power.
118  *
119  * @recalc_rate Recalculate the rate of this clock, by querying hardware. The
120  *              parent rate is an input parameter.  It is up to the caller to
121  *              ensure that the prepare_mutex is held across this call.
122  *              Returns the calculated rate.  Optional, but recommended - if
123  *              this op is not set then clock rate will be initialized to 0.
124  *
125  * @round_rate: Given a target rate as input, returns the closest rate actually
126  *              supported by the clock. The parent rate is an input/output
127  *              parameter.
128  *
129  * @determine_rate: Given a target rate as input, returns the closest rate
130  *              actually supported by the clock, and optionally the parent clock
131  *              that should be used to provide the clock rate.
132  *
133  * @set_parent: Change the input source of this clock; for clocks with multiple
134  *              possible parents specify a new parent by passing in the index
135  *              as a u8 corresponding to the parent in either the .parent_names
136  *              or .parents arrays.  This function in affect translates an
137  *              array index into the value programmed into the hardware.
138  *              Returns 0 on success, -EERROR otherwise.
139  *
140  * @get_parent: Queries the hardware to determine the parent of a clock.  The
141  *              return value is a u8 which specifies the index corresponding to
142  *              the parent clock.  This index can be applied to either the
143  *              .parent_names or .parents arrays.  In short, this function
144  *              translates the parent value read from hardware into an array
145  *              index.  Currently only called when the clock is initialized by
146  *              __clk_init.  This callback is mandatory for clocks with
147  *              multiple parents.  It is optional (and unnecessary) for clocks
148  *              with 0 or 1 parents.
149  *
150  * @set_rate:   Change the rate of this clock. The requested rate is specified
151  *              by the second argument, which should typically be the return
152  *              of .round_rate call.  The third argument gives the parent rate
153  *              which is likely helpful for most .set_rate implementation.
154  *              Returns 0 on success, -EERROR otherwise.
155  *
156  * @set_rate_and_parent: Change the rate and the parent of this clock. The
157  *              requested rate is specified by the second argument, which
158  *              should typically be the return of .round_rate call.  The
159  *              third argument gives the parent rate which is likely helpful
160  *              for most .set_rate_and_parent implementation. The fourth
161  *              argument gives the parent index. This callback is optional (and
162  *              unnecessary) for clocks with 0 or 1 parents as well as
163  *              for clocks that can tolerate switching the rate and the parent
164  *              separately via calls to .set_parent and .set_rate.
165  *              Returns 0 on success, -EERROR otherwise.
166  *
167  * @recalc_accuracy: Recalculate the accuracy of this clock. The clock accuracy
168  *              is expressed in ppb (parts per billion). The parent accuracy is
169  *              an input parameter.
170  *              Returns the calculated accuracy.  Optional - if this op is not
171  *              set then clock accuracy will be initialized to parent accuracy
172  *              or 0 (perfect clock) if clock has no parent.
173  *
174  * @get_phase:  Queries the hardware to get the current phase of a clock.
175  *              Returned values are 0-359 degrees on success, negative
176  *              error codes on failure.
177  *
178  * @set_phase:  Shift the phase this clock signal in degrees specified
179  *              by the second argument. Valid values for degrees are
180  *              0-359. Return 0 on success, otherwise -EERROR.
181  *
182  * @get_duty_cycle: Queries the hardware to get the current duty cycle ratio
183  *              of a clock. Returned values denominator cannot be 0 and must be
184  *              superior or equal to the numerator.
185  *
186  * @set_duty_cycle: Apply the duty cycle ratio to this clock signal specified by
187  *              the numerator (2nd argurment) and denominator (3rd  argument).
188  *              Argument must be a valid ratio (denominator > 0
189  *              and >= numerator) Return 0 on success, otherwise -EERROR.
190  *
191  * @init:       Perform platform-specific initialization magic.
192  *              This is not used by any of the basic clock types.
193  *              This callback exist for HW which needs to perform some
194  *              initialisation magic for CCF to get an accurate view of the
195  *              clock. It may also be used dynamic resource allocation is
196  *              required. It shall not used to deal with clock parameters,
197  *              such as rate or parents.
198  *              Returns 0 on success, -EERROR otherwise.
199  *
200  * @terminate:  Free any resource allocated by init.
201  *
202  * @debug_init: Set up type-specific debugfs entries for this clock.  This
203  *              is called once, after the debugfs directory entry for this
204  *              clock has been created.  The dentry pointer representing that
205  *              directory is provided as an argument.  Called with
206  *              prepare_lock held.  Returns 0 on success, -EERROR otherwise.
207  *
208  *
209  * The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow
210  * implementations to split any work between atomic (enable) and sleepable
211  * (prepare) contexts.  If enabling a clock requires code that might sleep,
212  * this must be done in clk_prepare.  Clock enable code that will never be
213  * called in a sleepable context may be implemented in clk_enable.
214  *
215  * Typically, drivers will call clk_prepare when a clock may be needed later
216  * (eg. when a device is opened), and clk_enable when the clock is actually
217  * required (eg. from an interrupt). Note that clk_prepare MUST have been
218  * called before clk_enable.
219  */
220 struct clk_ops {
221         int             (*prepare)(struct clk_hw *hw);
222         void            (*unprepare)(struct clk_hw *hw);
223         int             (*is_prepared)(struct clk_hw *hw);
224         void            (*unprepare_unused)(struct clk_hw *hw);
225         int             (*enable)(struct clk_hw *hw);
226         void            (*disable)(struct clk_hw *hw);
227         int             (*is_enabled)(struct clk_hw *hw);
228         void            (*disable_unused)(struct clk_hw *hw);
229         int             (*save_context)(struct clk_hw *hw);
230         void            (*restore_context)(struct clk_hw *hw);
231         unsigned long   (*recalc_rate)(struct clk_hw *hw,
232                                         unsigned long parent_rate);
233         long            (*round_rate)(struct clk_hw *hw, unsigned long rate,
234                                         unsigned long *parent_rate);
235         int             (*determine_rate)(struct clk_hw *hw,
236                                           struct clk_rate_request *req);
237         int             (*set_parent)(struct clk_hw *hw, u8 index);
238         u8              (*get_parent)(struct clk_hw *hw);
239         int             (*set_rate)(struct clk_hw *hw, unsigned long rate,
240                                     unsigned long parent_rate);
241         int             (*set_rate_and_parent)(struct clk_hw *hw,
242                                     unsigned long rate,
243                                     unsigned long parent_rate, u8 index);
244         unsigned long   (*recalc_accuracy)(struct clk_hw *hw,
245                                            unsigned long parent_accuracy);
246         int             (*get_phase)(struct clk_hw *hw);
247         int             (*set_phase)(struct clk_hw *hw, int degrees);
248         int             (*get_duty_cycle)(struct clk_hw *hw,
249                                           struct clk_duty *duty);
250         int             (*set_duty_cycle)(struct clk_hw *hw,
251                                           struct clk_duty *duty);
252         int             (*init)(struct clk_hw *hw);
253         void            (*terminate)(struct clk_hw *hw);
254         void            (*debug_init)(struct clk_hw *hw, struct dentry *dentry);
255 };
256
257 /**
258  * struct clk_parent_data - clk parent information
259  * @hw: parent clk_hw pointer (used for clk providers with internal clks)
260  * @fw_name: parent name local to provider registering clk
261  * @name: globally unique parent name (used as a fallback)
262  * @index: parent index local to provider registering clk (if @fw_name absent)
263  */
264 struct clk_parent_data {
265         const struct clk_hw     *hw;
266         const char              *fw_name;
267         const char              *name;
268         int                     index;
269 };
270
271 /**
272  * struct clk_init_data - holds init data that's common to all clocks and is
273  * shared between the clock provider and the common clock framework.
274  *
275  * @name: clock name
276  * @ops: operations this clock supports
277  * @parent_names: array of string names for all possible parents
278  * @parent_data: array of parent data for all possible parents (when some
279  *               parents are external to the clk controller)
280  * @parent_hws: array of pointers to all possible parents (when all parents
281  *              are internal to the clk controller)
282  * @num_parents: number of possible parents
283  * @flags: framework-level hints and quirks
284  */
285 struct clk_init_data {
286         const char              *name;
287         const struct clk_ops    *ops;
288         /* Only one of the following three should be assigned */
289         const char              * const *parent_names;
290         const struct clk_parent_data    *parent_data;
291         const struct clk_hw             **parent_hws;
292         u8                      num_parents;
293         unsigned long           flags;
294 };
295
296 /**
297  * struct clk_hw - handle for traversing from a struct clk to its corresponding
298  * hardware-specific structure.  struct clk_hw should be declared within struct
299  * clk_foo and then referenced by the struct clk instance that uses struct
300  * clk_foo's clk_ops
301  *
302  * @core: pointer to the struct clk_core instance that points back to this
303  * struct clk_hw instance
304  *
305  * @clk: pointer to the per-user struct clk instance that can be used to call
306  * into the clk API
307  *
308  * @init: pointer to struct clk_init_data that contains the init data shared
309  * with the common clock framework. This pointer will be set to NULL once
310  * a clk_register() variant is called on this clk_hw pointer.
311  */
312 struct clk_hw {
313         struct clk_core *core;
314         struct clk *clk;
315         const struct clk_init_data *init;
316 };
317
318 /*
319  * DOC: Basic clock implementations common to many platforms
320  *
321  * Each basic clock hardware type is comprised of a structure describing the
322  * clock hardware, implementations of the relevant callbacks in struct clk_ops,
323  * unique flags for that hardware type, a registration function and an
324  * alternative macro for static initialization
325  */
326
327 /**
328  * struct clk_fixed_rate - fixed-rate clock
329  * @hw:         handle between common and hardware-specific interfaces
330  * @fixed_rate: constant frequency of clock
331  * @fixed_accuracy: constant accuracy of clock in ppb (parts per billion)
332  * @flags:      hardware specific flags
333  *
334  * Flags:
335  * * CLK_FIXED_RATE_PARENT_ACCURACY - Use the accuracy of the parent clk
336  *                                    instead of what's set in @fixed_accuracy.
337  */
338 struct clk_fixed_rate {
339         struct          clk_hw hw;
340         unsigned long   fixed_rate;
341         unsigned long   fixed_accuracy;
342         unsigned long   flags;
343 };
344
345 #define CLK_FIXED_RATE_PARENT_ACCURACY  BIT(0)
346
347 extern const struct clk_ops clk_fixed_rate_ops;
348 struct clk_hw *__clk_hw_register_fixed_rate(struct device *dev,
349                 struct device_node *np, const char *name,
350                 const char *parent_name, const struct clk_hw *parent_hw,
351                 const struct clk_parent_data *parent_data, unsigned long flags,
352                 unsigned long fixed_rate, unsigned long fixed_accuracy,
353                 unsigned long clk_fixed_flags);
354 struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
355                 const char *parent_name, unsigned long flags,
356                 unsigned long fixed_rate);
357 /**
358  * clk_hw_register_fixed_rate - register fixed-rate clock with the clock
359  * framework
360  * @dev: device that is registering this clock
361  * @name: name of this clock
362  * @parent_name: name of clock's parent
363  * @flags: framework-specific flags
364  * @fixed_rate: non-adjustable clock rate
365  */
366 #define clk_hw_register_fixed_rate(dev, name, parent_name, flags, fixed_rate)  \
367         __clk_hw_register_fixed_rate((dev), NULL, (name), (parent_name), NULL, \
368                                      NULL, (flags), (fixed_rate), 0, 0)
369 /**
370  * clk_hw_register_fixed_rate_parent_hw - register fixed-rate clock with
371  * the clock framework
372  * @dev: device that is registering this clock
373  * @name: name of this clock
374  * @parent_hw: pointer to parent clk
375  * @flags: framework-specific flags
376  * @fixed_rate: non-adjustable clock rate
377  */
378 #define clk_hw_register_fixed_rate_parent_hw(dev, name, parent_hw, flags,     \
379                                              fixed_rate)                      \
380         __clk_hw_register_fixed_rate((dev), NULL, (name), NULL, (parent_hw),  \
381                                      NULL, (flags), (fixed_rate), 0, 0)
382 /**
383  * clk_hw_register_fixed_rate_parent_data - register fixed-rate clock with
384  * the clock framework
385  * @dev: device that is registering this clock
386  * @name: name of this clock
387  * @parent_data: parent clk data
388  * @flags: framework-specific flags
389  * @fixed_rate: non-adjustable clock rate
390  */
391 #define clk_hw_register_fixed_rate_parent_data(dev, name, parent_hw, flags,   \
392                                              fixed_rate)                      \
393         __clk_hw_register_fixed_rate((dev), NULL, (name), NULL, NULL,         \
394                                      (parent_data), (flags), (fixed_rate), 0, \
395                                      0)
396 /**
397  * clk_hw_register_fixed_rate_with_accuracy - register fixed-rate clock with
398  * the clock framework
399  * @dev: device that is registering this clock
400  * @name: name of this clock
401  * @parent_name: name of clock's parent
402  * @flags: framework-specific flags
403  * @fixed_rate: non-adjustable clock rate
404  * @fixed_accuracy: non-adjustable clock accuracy
405  */
406 #define clk_hw_register_fixed_rate_with_accuracy(dev, name, parent_name,      \
407                                                  flags, fixed_rate,           \
408                                                  fixed_accuracy)              \
409         __clk_hw_register_fixed_rate((dev), NULL, (name), (parent_name),      \
410                                      NULL, NULL, (flags), (fixed_rate),       \
411                                      (fixed_accuracy), 0)
412 /**
413  * clk_hw_register_fixed_rate_with_accuracy_parent_hw - register fixed-rate
414  * clock with the clock framework
415  * @dev: device that is registering this clock
416  * @name: name of this clock
417  * @parent_hw: pointer to parent clk
418  * @flags: framework-specific flags
419  * @fixed_rate: non-adjustable clock rate
420  * @fixed_accuracy: non-adjustable clock accuracy
421  */
422 #define clk_hw_register_fixed_rate_with_accuracy_parent_hw(dev, name,         \
423                 parent_hw, flags, fixed_rate, fixed_accuracy)                 \
424         __clk_hw_register_fixed_rate((dev), NULL, (name), NULL, (parent_hw)   \
425                                      NULL, NULL, (flags), (fixed_rate),       \
426                                      (fixed_accuracy), 0)
427 /**
428  * clk_hw_register_fixed_rate_with_accuracy_parent_data - register fixed-rate
429  * clock with the clock framework
430  * @dev: device that is registering this clock
431  * @name: name of this clock
432  * @parent_name: name of clock's parent
433  * @flags: framework-specific flags
434  * @fixed_rate: non-adjustable clock rate
435  * @fixed_accuracy: non-adjustable clock accuracy
436  */
437 #define clk_hw_register_fixed_rate_with_accuracy_parent_data(dev, name,       \
438                 parent_data, flags, fixed_rate, fixed_accuracy)               \
439         __clk_hw_register_fixed_rate((dev), NULL, (name), NULL, NULL,         \
440                                      (parent_data), NULL, (flags),            \
441                                      (fixed_rate), (fixed_accuracy), 0)
442
443 void clk_unregister_fixed_rate(struct clk *clk);
444 void clk_hw_unregister_fixed_rate(struct clk_hw *hw);
445
446 void of_fixed_clk_setup(struct device_node *np);
447
448 /**
449  * struct clk_gate - gating clock
450  *
451  * @hw:         handle between common and hardware-specific interfaces
452  * @reg:        register controlling gate
453  * @bit_idx:    single bit controlling gate
454  * @flags:      hardware-specific flags
455  * @lock:       register lock
456  *
457  * Clock which can gate its output.  Implements .enable & .disable
458  *
459  * Flags:
460  * CLK_GATE_SET_TO_DISABLE - by default this clock sets the bit at bit_idx to
461  *      enable the clock.  Setting this flag does the opposite: setting the bit
462  *      disable the clock and clearing it enables the clock
463  * CLK_GATE_HIWORD_MASK - The gate settings are only in lower 16-bit
464  *      of this register, and mask of gate bits are in higher 16-bit of this
465  *      register.  While setting the gate bits, higher 16-bit should also be
466  *      updated to indicate changing gate bits.
467  * CLK_GATE_BIG_ENDIAN - by default little endian register accesses are used for
468  *      the gate register.  Setting this flag makes the register accesses big
469  *      endian.
470  */
471 struct clk_gate {
472         struct clk_hw hw;
473         void __iomem    *reg;
474         u8              bit_idx;
475         u8              flags;
476         spinlock_t      *lock;
477 };
478
479 #define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
480
481 #define CLK_GATE_SET_TO_DISABLE         BIT(0)
482 #define CLK_GATE_HIWORD_MASK            BIT(1)
483 #define CLK_GATE_BIG_ENDIAN             BIT(2)
484
485 extern const struct clk_ops clk_gate_ops;
486 struct clk_hw *__clk_hw_register_gate(struct device *dev,
487                 struct device_node *np, const char *name,
488                 const char *parent_name, const struct clk_hw *parent_hw,
489                 const struct clk_parent_data *parent_data,
490                 unsigned long flags,
491                 void __iomem *reg, u8 bit_idx,
492                 u8 clk_gate_flags, spinlock_t *lock);
493 struct clk *clk_register_gate(struct device *dev, const char *name,
494                 const char *parent_name, unsigned long flags,
495                 void __iomem *reg, u8 bit_idx,
496                 u8 clk_gate_flags, spinlock_t *lock);
497 /**
498  * clk_hw_register_gate - register a gate clock with the clock framework
499  * @dev: device that is registering this clock
500  * @name: name of this clock
501  * @parent_name: name of this clock's parent
502  * @flags: framework-specific flags for this clock
503  * @reg: register address to control gating of this clock
504  * @bit_idx: which bit in the register controls gating of this clock
505  * @clk_gate_flags: gate-specific flags for this clock
506  * @lock: shared register lock for this clock
507  */
508 #define clk_hw_register_gate(dev, name, parent_name, flags, reg, bit_idx,     \
509                              clk_gate_flags, lock)                            \
510         __clk_hw_register_gate((dev), NULL, (name), (parent_name), NULL,      \
511                                NULL, (flags), (reg), (bit_idx),               \
512                                (clk_gate_flags), (lock))
513 /**
514  * clk_hw_register_gate_parent_hw - register a gate clock with the clock
515  * framework
516  * @dev: device that is registering this clock
517  * @name: name of this clock
518  * @parent_hw: pointer to parent clk
519  * @flags: framework-specific flags for this clock
520  * @reg: register address to control gating of this clock
521  * @bit_idx: which bit in the register controls gating of this clock
522  * @clk_gate_flags: gate-specific flags for this clock
523  * @lock: shared register lock for this clock
524  */
525 #define clk_hw_register_gate_parent_hw(dev, name, parent_hw, flags, reg,      \
526                                        bit_idx, clk_gate_flags, lock)         \
527         __clk_hw_register_gate((dev), NULL, (name), NULL, (parent_hw),        \
528                                NULL, (flags), (reg), (bit_idx),               \
529                                (clk_gate_flags), (lock))
530 /**
531  * clk_hw_register_gate_parent_data - register a gate clock with the clock
532  * framework
533  * @dev: device that is registering this clock
534  * @name: name of this clock
535  * @parent_data: parent clk data
536  * @flags: framework-specific flags for this clock
537  * @reg: register address to control gating of this clock
538  * @bit_idx: which bit in the register controls gating of this clock
539  * @clk_gate_flags: gate-specific flags for this clock
540  * @lock: shared register lock for this clock
541  */
542 #define clk_hw_register_gate_parent_data(dev, name, parent_data, flags, reg,  \
543                                        bit_idx, clk_gate_flags, lock)         \
544         __clk_hw_register_gate((dev), NULL, (name), NULL, NULL, (parent_data), \
545                                (flags), (reg), (bit_idx),                     \
546                                (clk_gate_flags), (lock))
547 void clk_unregister_gate(struct clk *clk);
548 void clk_hw_unregister_gate(struct clk_hw *hw);
549 int clk_gate_is_enabled(struct clk_hw *hw);
550
551 struct clk_div_table {
552         unsigned int    val;
553         unsigned int    div;
554 };
555
556 /**
557  * struct clk_divider - adjustable divider clock
558  *
559  * @hw:         handle between common and hardware-specific interfaces
560  * @reg:        register containing the divider
561  * @shift:      shift to the divider bit field
562  * @width:      width of the divider bit field
563  * @table:      array of value/divider pairs, last entry should have div = 0
564  * @lock:       register lock
565  *
566  * Clock with an adjustable divider affecting its output frequency.  Implements
567  * .recalc_rate, .set_rate and .round_rate
568  *
569  * Flags:
570  * CLK_DIVIDER_ONE_BASED - by default the divisor is the value read from the
571  *      register plus one.  If CLK_DIVIDER_ONE_BASED is set then the divider is
572  *      the raw value read from the register, with the value of zero considered
573  *      invalid, unless CLK_DIVIDER_ALLOW_ZERO is set.
574  * CLK_DIVIDER_POWER_OF_TWO - clock divisor is 2 raised to the value read from
575  *      the hardware register
576  * CLK_DIVIDER_ALLOW_ZERO - Allow zero divisors.  For dividers which have
577  *      CLK_DIVIDER_ONE_BASED set, it is possible to end up with a zero divisor.
578  *      Some hardware implementations gracefully handle this case and allow a
579  *      zero divisor by not modifying their input clock
580  *      (divide by one / bypass).
581  * CLK_DIVIDER_HIWORD_MASK - The divider settings are only in lower 16-bit
582  *      of this register, and mask of divider bits are in higher 16-bit of this
583  *      register.  While setting the divider bits, higher 16-bit should also be
584  *      updated to indicate changing divider bits.
585  * CLK_DIVIDER_ROUND_CLOSEST - Makes the best calculated divider to be rounded
586  *      to the closest integer instead of the up one.
587  * CLK_DIVIDER_READ_ONLY - The divider settings are preconfigured and should
588  *      not be changed by the clock framework.
589  * CLK_DIVIDER_MAX_AT_ZERO - For dividers which are like CLK_DIVIDER_ONE_BASED
590  *      except when the value read from the register is zero, the divisor is
591  *      2^width of the field.
592  * CLK_DIVIDER_BIG_ENDIAN - By default little endian register accesses are used
593  *      for the divider register.  Setting this flag makes the register accesses
594  *      big endian.
595  */
596 struct clk_divider {
597         struct clk_hw   hw;
598         void __iomem    *reg;
599         u8              shift;
600         u8              width;
601         u8              flags;
602         const struct clk_div_table      *table;
603         spinlock_t      *lock;
604 };
605
606 #define clk_div_mask(width)     ((1 << (width)) - 1)
607 #define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
608
609 #define CLK_DIVIDER_ONE_BASED           BIT(0)
610 #define CLK_DIVIDER_POWER_OF_TWO        BIT(1)
611 #define CLK_DIVIDER_ALLOW_ZERO          BIT(2)
612 #define CLK_DIVIDER_HIWORD_MASK         BIT(3)
613 #define CLK_DIVIDER_ROUND_CLOSEST       BIT(4)
614 #define CLK_DIVIDER_READ_ONLY           BIT(5)
615 #define CLK_DIVIDER_MAX_AT_ZERO         BIT(6)
616 #define CLK_DIVIDER_BIG_ENDIAN          BIT(7)
617
618 extern const struct clk_ops clk_divider_ops;
619 extern const struct clk_ops clk_divider_ro_ops;
620
621 unsigned long divider_recalc_rate(struct clk_hw *hw, unsigned long parent_rate,
622                 unsigned int val, const struct clk_div_table *table,
623                 unsigned long flags, unsigned long width);
624 long divider_round_rate_parent(struct clk_hw *hw, struct clk_hw *parent,
625                                unsigned long rate, unsigned long *prate,
626                                const struct clk_div_table *table,
627                                u8 width, unsigned long flags);
628 long divider_ro_round_rate_parent(struct clk_hw *hw, struct clk_hw *parent,
629                                   unsigned long rate, unsigned long *prate,
630                                   const struct clk_div_table *table, u8 width,
631                                   unsigned long flags, unsigned int val);
632 int divider_determine_rate(struct clk_hw *hw, struct clk_rate_request *req,
633                            const struct clk_div_table *table, u8 width,
634                            unsigned long flags);
635 int divider_ro_determine_rate(struct clk_hw *hw, struct clk_rate_request *req,
636                               const struct clk_div_table *table, u8 width,
637                               unsigned long flags, unsigned int val);
638 int divider_get_val(unsigned long rate, unsigned long parent_rate,
639                 const struct clk_div_table *table, u8 width,
640                 unsigned long flags);
641
642 struct clk_hw *__clk_hw_register_divider(struct device *dev,
643                 struct device_node *np, const char *name,
644                 const char *parent_name, const struct clk_hw *parent_hw,
645                 const struct clk_parent_data *parent_data, unsigned long flags,
646                 void __iomem *reg, u8 shift, u8 width, u8 clk_divider_flags,
647                 const struct clk_div_table *table, spinlock_t *lock);
648 struct clk_hw *__devm_clk_hw_register_divider(struct device *dev,
649                 struct device_node *np, const char *name,
650                 const char *parent_name, const struct clk_hw *parent_hw,
651                 const struct clk_parent_data *parent_data, unsigned long flags,
652                 void __iomem *reg, u8 shift, u8 width, u8 clk_divider_flags,
653                 const struct clk_div_table *table, spinlock_t *lock);
654 struct clk *clk_register_divider_table(struct device *dev, const char *name,
655                 const char *parent_name, unsigned long flags,
656                 void __iomem *reg, u8 shift, u8 width,
657                 u8 clk_divider_flags, const struct clk_div_table *table,
658                 spinlock_t *lock);
659 /**
660  * clk_register_divider - register a divider clock with the clock framework
661  * @dev: device registering this clock
662  * @name: name of this clock
663  * @parent_name: name of clock's parent
664  * @flags: framework-specific flags
665  * @reg: register address to adjust divider
666  * @shift: number of bits to shift the bitfield
667  * @width: width of the bitfield
668  * @clk_divider_flags: divider-specific flags for this clock
669  * @lock: shared register lock for this clock
670  */
671 #define clk_register_divider(dev, name, parent_name, flags, reg, shift, width, \
672                              clk_divider_flags, lock)                          \
673         clk_register_divider_table((dev), (name), (parent_name), (flags),      \
674                                    (reg), (shift), (width),                    \
675                                    (clk_divider_flags), NULL, (lock))
676 /**
677  * clk_hw_register_divider - register a divider clock with the clock framework
678  * @dev: device registering this clock
679  * @name: name of this clock
680  * @parent_name: name of clock's parent
681  * @flags: framework-specific flags
682  * @reg: register address to adjust divider
683  * @shift: number of bits to shift the bitfield
684  * @width: width of the bitfield
685  * @clk_divider_flags: divider-specific flags for this clock
686  * @lock: shared register lock for this clock
687  */
688 #define clk_hw_register_divider(dev, name, parent_name, flags, reg, shift,    \
689                                 width, clk_divider_flags, lock)               \
690         __clk_hw_register_divider((dev), NULL, (name), (parent_name), NULL,   \
691                                   NULL, (flags), (reg), (shift), (width),     \
692                                   (clk_divider_flags), NULL, (lock))
693 /**
694  * clk_hw_register_divider_parent_hw - register a divider clock with the clock
695  * framework
696  * @dev: device registering this clock
697  * @name: name of this clock
698  * @parent_hw: pointer to parent clk
699  * @flags: framework-specific flags
700  * @reg: register address to adjust divider
701  * @shift: number of bits to shift the bitfield
702  * @width: width of the bitfield
703  * @clk_divider_flags: divider-specific flags for this clock
704  * @lock: shared register lock for this clock
705  */
706 #define clk_hw_register_divider_parent_hw(dev, name, parent_hw, flags, reg,   \
707                                           shift, width, clk_divider_flags,    \
708                                           lock)                               \
709         __clk_hw_register_divider((dev), NULL, (name), NULL, (parent_hw),     \
710                                   NULL, (flags), (reg), (shift), (width),     \
711                                   (clk_divider_flags), NULL, (lock))
712 /**
713  * clk_hw_register_divider_parent_data - register a divider clock with the clock
714  * framework
715  * @dev: device registering this clock
716  * @name: name of this clock
717  * @parent_data: parent clk data
718  * @flags: framework-specific flags
719  * @reg: register address to adjust divider
720  * @shift: number of bits to shift the bitfield
721  * @width: width of the bitfield
722  * @clk_divider_flags: divider-specific flags for this clock
723  * @lock: shared register lock for this clock
724  */
725 #define clk_hw_register_divider_parent_data(dev, name, parent_data, flags,    \
726                                             reg, shift, width,                \
727                                             clk_divider_flags, lock)          \
728         __clk_hw_register_divider((dev), NULL, (name), NULL, NULL,            \
729                                   (parent_data), (flags), (reg), (shift),     \
730                                   (width), (clk_divider_flags), NULL, (lock))
731 /**
732  * clk_hw_register_divider_table - register a table based divider clock with
733  * the clock framework
734  * @dev: device registering this clock
735  * @name: name of this clock
736  * @parent_name: name of clock's parent
737  * @flags: framework-specific flags
738  * @reg: register address to adjust divider
739  * @shift: number of bits to shift the bitfield
740  * @width: width of the bitfield
741  * @clk_divider_flags: divider-specific flags for this clock
742  * @table: array of divider/value pairs ending with a div set to 0
743  * @lock: shared register lock for this clock
744  */
745 #define clk_hw_register_divider_table(dev, name, parent_name, flags, reg,     \
746                                       shift, width, clk_divider_flags, table, \
747                                       lock)                                   \
748         __clk_hw_register_divider((dev), NULL, (name), (parent_name), NULL,   \
749                                   NULL, (flags), (reg), (shift), (width),     \
750                                   (clk_divider_flags), (table), (lock))
751 /**
752  * clk_hw_register_divider_table_parent_hw - register a table based divider
753  * clock with the clock framework
754  * @dev: device registering this clock
755  * @name: name of this clock
756  * @parent_hw: pointer to parent clk
757  * @flags: framework-specific flags
758  * @reg: register address to adjust divider
759  * @shift: number of bits to shift the bitfield
760  * @width: width of the bitfield
761  * @clk_divider_flags: divider-specific flags for this clock
762  * @table: array of divider/value pairs ending with a div set to 0
763  * @lock: shared register lock for this clock
764  */
765 #define clk_hw_register_divider_table_parent_hw(dev, name, parent_hw, flags,  \
766                                                 reg, shift, width,            \
767                                                 clk_divider_flags, table,     \
768                                                 lock)                         \
769         __clk_hw_register_divider((dev), NULL, (name), NULL, (parent_hw),     \
770                                   NULL, (flags), (reg), (shift), (width),     \
771                                   (clk_divider_flags), (table), (lock))
772 /**
773  * clk_hw_register_divider_table_parent_data - register a table based divider
774  * clock with the clock framework
775  * @dev: device registering this clock
776  * @name: name of this clock
777  * @parent_data: parent clk data
778  * @flags: framework-specific flags
779  * @reg: register address to adjust divider
780  * @shift: number of bits to shift the bitfield
781  * @width: width of the bitfield
782  * @clk_divider_flags: divider-specific flags for this clock
783  * @table: array of divider/value pairs ending with a div set to 0
784  * @lock: shared register lock for this clock
785  */
786 #define clk_hw_register_divider_table_parent_data(dev, name, parent_data,     \
787                                                   flags, reg, shift, width,   \
788                                                   clk_divider_flags, table,   \
789                                                   lock)                       \
790         __clk_hw_register_divider((dev), NULL, (name), NULL, NULL,            \
791                                   (parent_data), (flags), (reg), (shift),     \
792                                   (width), (clk_divider_flags), (table),      \
793                                   (lock))
794 /**
795  * devm_clk_hw_register_divider - register a divider clock with the clock framework
796  * @dev: device registering this clock
797  * @name: name of this clock
798  * @parent_name: name of clock's parent
799  * @flags: framework-specific flags
800  * @reg: register address to adjust divider
801  * @shift: number of bits to shift the bitfield
802  * @width: width of the bitfield
803  * @clk_divider_flags: divider-specific flags for this clock
804  * @lock: shared register lock for this clock
805  */
806 #define devm_clk_hw_register_divider(dev, name, parent_name, flags, reg, shift,    \
807                                 width, clk_divider_flags, lock)               \
808         __devm_clk_hw_register_divider((dev), NULL, (name), (parent_name), NULL,   \
809                                   NULL, (flags), (reg), (shift), (width),     \
810                                   (clk_divider_flags), NULL, (lock))
811 /**
812  * devm_clk_hw_register_divider_table - register a table based divider clock
813  * with the clock framework (devres variant)
814  * @dev: device registering this clock
815  * @name: name of this clock
816  * @parent_name: name of clock's parent
817  * @flags: framework-specific flags
818  * @reg: register address to adjust divider
819  * @shift: number of bits to shift the bitfield
820  * @width: width of the bitfield
821  * @clk_divider_flags: divider-specific flags for this clock
822  * @table: array of divider/value pairs ending with a div set to 0
823  * @lock: shared register lock for this clock
824  */
825 #define devm_clk_hw_register_divider_table(dev, name, parent_name, flags,     \
826                                            reg, shift, width,                 \
827                                            clk_divider_flags, table, lock)    \
828         __devm_clk_hw_register_divider((dev), NULL, (name), (parent_name),    \
829                                        NULL, NULL, (flags), (reg), (shift),   \
830                                        (width), (clk_divider_flags), (table), \
831                                        (lock))
832
833 void clk_unregister_divider(struct clk *clk);
834 void clk_hw_unregister_divider(struct clk_hw *hw);
835
836 /**
837  * struct clk_mux - multiplexer clock
838  *
839  * @hw:         handle between common and hardware-specific interfaces
840  * @reg:        register controlling multiplexer
841  * @table:      array of register values corresponding to the parent index
842  * @shift:      shift to multiplexer bit field
843  * @mask:       mask of mutliplexer bit field
844  * @flags:      hardware-specific flags
845  * @lock:       register lock
846  *
847  * Clock with multiple selectable parents.  Implements .get_parent, .set_parent
848  * and .recalc_rate
849  *
850  * Flags:
851  * CLK_MUX_INDEX_ONE - register index starts at 1, not 0
852  * CLK_MUX_INDEX_BIT - register index is a single bit (power of two)
853  * CLK_MUX_HIWORD_MASK - The mux settings are only in lower 16-bit of this
854  *      register, and mask of mux bits are in higher 16-bit of this register.
855  *      While setting the mux bits, higher 16-bit should also be updated to
856  *      indicate changing mux bits.
857  * CLK_MUX_READ_ONLY - The mux registers can't be written, only read in the
858  *      .get_parent clk_op.
859  * CLK_MUX_ROUND_CLOSEST - Use the parent rate that is closest to the desired
860  *      frequency.
861  * CLK_MUX_BIG_ENDIAN - By default little endian register accesses are used for
862  *      the mux register.  Setting this flag makes the register accesses big
863  *      endian.
864  */
865 struct clk_mux {
866         struct clk_hw   hw;
867         void __iomem    *reg;
868         u32             *table;
869         u32             mask;
870         u8              shift;
871         u8              flags;
872         spinlock_t      *lock;
873 };
874
875 #define to_clk_mux(_hw) container_of(_hw, struct clk_mux, hw)
876
877 #define CLK_MUX_INDEX_ONE               BIT(0)
878 #define CLK_MUX_INDEX_BIT               BIT(1)
879 #define CLK_MUX_HIWORD_MASK             BIT(2)
880 #define CLK_MUX_READ_ONLY               BIT(3) /* mux can't be changed */
881 #define CLK_MUX_ROUND_CLOSEST           BIT(4)
882 #define CLK_MUX_BIG_ENDIAN              BIT(5)
883
884 extern const struct clk_ops clk_mux_ops;
885 extern const struct clk_ops clk_mux_ro_ops;
886
887 struct clk_hw *__clk_hw_register_mux(struct device *dev, struct device_node *np,
888                 const char *name, u8 num_parents,
889                 const char * const *parent_names,
890                 const struct clk_hw **parent_hws,
891                 const struct clk_parent_data *parent_data,
892                 unsigned long flags, void __iomem *reg, u8 shift, u32 mask,
893                 u8 clk_mux_flags, u32 *table, spinlock_t *lock);
894 struct clk_hw *__devm_clk_hw_register_mux(struct device *dev, struct device_node *np,
895                 const char *name, u8 num_parents,
896                 const char * const *parent_names,
897                 const struct clk_hw **parent_hws,
898                 const struct clk_parent_data *parent_data,
899                 unsigned long flags, void __iomem *reg, u8 shift, u32 mask,
900                 u8 clk_mux_flags, u32 *table, spinlock_t *lock);
901 struct clk *clk_register_mux_table(struct device *dev, const char *name,
902                 const char * const *parent_names, u8 num_parents,
903                 unsigned long flags, void __iomem *reg, u8 shift, u32 mask,
904                 u8 clk_mux_flags, u32 *table, spinlock_t *lock);
905
906 #define clk_register_mux(dev, name, parent_names, num_parents, flags, reg,    \
907                          shift, width, clk_mux_flags, lock)                   \
908         clk_register_mux_table((dev), (name), (parent_names), (num_parents),  \
909                                (flags), (reg), (shift), BIT((width)) - 1,     \
910                                (clk_mux_flags), NULL, (lock))
911 #define clk_hw_register_mux_table(dev, name, parent_names, num_parents,       \
912                                   flags, reg, shift, mask, clk_mux_flags,     \
913                                   table, lock)                                \
914         __clk_hw_register_mux((dev), NULL, (name), (num_parents),             \
915                               (parent_names), NULL, NULL, (flags), (reg),     \
916                               (shift), (mask), (clk_mux_flags), (table),      \
917                               (lock))
918 #define clk_hw_register_mux(dev, name, parent_names, num_parents, flags, reg, \
919                             shift, width, clk_mux_flags, lock)                \
920         __clk_hw_register_mux((dev), NULL, (name), (num_parents),             \
921                               (parent_names), NULL, NULL, (flags), (reg),     \
922                               (shift), BIT((width)) - 1, (clk_mux_flags),     \
923                               NULL, (lock))
924 #define clk_hw_register_mux_hws(dev, name, parent_hws, num_parents, flags,    \
925                                 reg, shift, width, clk_mux_flags, lock)       \
926         __clk_hw_register_mux((dev), NULL, (name), (num_parents), NULL,       \
927                               (parent_hws), NULL, (flags), (reg), (shift),    \
928                               BIT((width)) - 1, (clk_mux_flags), NULL, (lock))
929 #define clk_hw_register_mux_parent_data(dev, name, parent_data, num_parents,  \
930                                         flags, reg, shift, width,             \
931                                         clk_mux_flags, lock)                  \
932         __clk_hw_register_mux((dev), NULL, (name), (num_parents), NULL, NULL, \
933                               (parent_data), (flags), (reg), (shift),         \
934                               BIT((width)) - 1, (clk_mux_flags), NULL, (lock))
935 #define devm_clk_hw_register_mux(dev, name, parent_names, num_parents, flags, reg, \
936                             shift, width, clk_mux_flags, lock)                \
937         __devm_clk_hw_register_mux((dev), NULL, (name), (num_parents),        \
938                               (parent_names), NULL, NULL, (flags), (reg),     \
939                               (shift), BIT((width)) - 1, (clk_mux_flags),     \
940                               NULL, (lock))
941
942 int clk_mux_val_to_index(struct clk_hw *hw, u32 *table, unsigned int flags,
943                          unsigned int val);
944 unsigned int clk_mux_index_to_val(u32 *table, unsigned int flags, u8 index);
945
946 void clk_unregister_mux(struct clk *clk);
947 void clk_hw_unregister_mux(struct clk_hw *hw);
948
949 void of_fixed_factor_clk_setup(struct device_node *node);
950
951 /**
952  * struct clk_fixed_factor - fixed multiplier and divider clock
953  *
954  * @hw:         handle between common and hardware-specific interfaces
955  * @mult:       multiplier
956  * @div:        divider
957  *
958  * Clock with a fixed multiplier and divider. The output frequency is the
959  * parent clock rate divided by div and multiplied by mult.
960  * Implements .recalc_rate, .set_rate and .round_rate
961  */
962
963 struct clk_fixed_factor {
964         struct clk_hw   hw;
965         unsigned int    mult;
966         unsigned int    div;
967 };
968
969 #define to_clk_fixed_factor(_hw) container_of(_hw, struct clk_fixed_factor, hw)
970
971 extern const struct clk_ops clk_fixed_factor_ops;
972 struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
973                 const char *parent_name, unsigned long flags,
974                 unsigned int mult, unsigned int div);
975 void clk_unregister_fixed_factor(struct clk *clk);
976 struct clk_hw *clk_hw_register_fixed_factor(struct device *dev,
977                 const char *name, const char *parent_name, unsigned long flags,
978                 unsigned int mult, unsigned int div);
979 void clk_hw_unregister_fixed_factor(struct clk_hw *hw);
980 struct clk_hw *devm_clk_hw_register_fixed_factor(struct device *dev,
981                 const char *name, const char *parent_name, unsigned long flags,
982                 unsigned int mult, unsigned int div);
983 /**
984  * struct clk_fractional_divider - adjustable fractional divider clock
985  *
986  * @hw:         handle between common and hardware-specific interfaces
987  * @reg:        register containing the divider
988  * @mshift:     shift to the numerator bit field
989  * @mwidth:     width of the numerator bit field
990  * @nshift:     shift to the denominator bit field
991  * @nwidth:     width of the denominator bit field
992  * @lock:       register lock
993  *
994  * Clock with adjustable fractional divider affecting its output frequency.
995  *
996  * Flags:
997  * CLK_FRAC_DIVIDER_ZERO_BASED - by default the numerator and denominator
998  *      is the value read from the register. If CLK_FRAC_DIVIDER_ZERO_BASED
999  *      is set then the numerator and denominator are both the value read
1000  *      plus one.
1001  * CLK_FRAC_DIVIDER_BIG_ENDIAN - By default little endian register accesses are
1002  *      used for the divider register.  Setting this flag makes the register
1003  *      accesses big endian.
1004  * CLK_FRAC_DIVIDER_POWER_OF_TWO_PS - By default the resulting fraction might
1005  *      be saturated and the caller will get quite far from the good enough
1006  *      approximation. Instead the caller may require, by setting this flag,
1007  *      to shift left by a few bits in case, when the asked one is quite small
1008  *      to satisfy the desired range of denominator. It assumes that on the
1009  *      caller's side the power-of-two capable prescaler exists.
1010  */
1011 struct clk_fractional_divider {
1012         struct clk_hw   hw;
1013         void __iomem    *reg;
1014         u8              mshift;
1015         u8              mwidth;
1016         u32             mmask;
1017         u8              nshift;
1018         u8              nwidth;
1019         u32             nmask;
1020         u8              flags;
1021         void            (*approximation)(struct clk_hw *hw,
1022                                 unsigned long rate, unsigned long *parent_rate,
1023                                 unsigned long *m, unsigned long *n);
1024         spinlock_t      *lock;
1025 };
1026
1027 #define to_clk_fd(_hw) container_of(_hw, struct clk_fractional_divider, hw)
1028
1029 #define CLK_FRAC_DIVIDER_ZERO_BASED             BIT(0)
1030 #define CLK_FRAC_DIVIDER_BIG_ENDIAN             BIT(1)
1031 #define CLK_FRAC_DIVIDER_POWER_OF_TWO_PS        BIT(2)
1032
1033 struct clk *clk_register_fractional_divider(struct device *dev,
1034                 const char *name, const char *parent_name, unsigned long flags,
1035                 void __iomem *reg, u8 mshift, u8 mwidth, u8 nshift, u8 nwidth,
1036                 u8 clk_divider_flags, spinlock_t *lock);
1037 struct clk_hw *clk_hw_register_fractional_divider(struct device *dev,
1038                 const char *name, const char *parent_name, unsigned long flags,
1039                 void __iomem *reg, u8 mshift, u8 mwidth, u8 nshift, u8 nwidth,
1040                 u8 clk_divider_flags, spinlock_t *lock);
1041 void clk_hw_unregister_fractional_divider(struct clk_hw *hw);
1042
1043 /**
1044  * struct clk_multiplier - adjustable multiplier clock
1045  *
1046  * @hw:         handle between common and hardware-specific interfaces
1047  * @reg:        register containing the multiplier
1048  * @shift:      shift to the multiplier bit field
1049  * @width:      width of the multiplier bit field
1050  * @lock:       register lock
1051  *
1052  * Clock with an adjustable multiplier affecting its output frequency.
1053  * Implements .recalc_rate, .set_rate and .round_rate
1054  *
1055  * Flags:
1056  * CLK_MULTIPLIER_ZERO_BYPASS - By default, the multiplier is the value read
1057  *      from the register, with 0 being a valid value effectively
1058  *      zeroing the output clock rate. If CLK_MULTIPLIER_ZERO_BYPASS is
1059  *      set, then a null multiplier will be considered as a bypass,
1060  *      leaving the parent rate unmodified.
1061  * CLK_MULTIPLIER_ROUND_CLOSEST - Makes the best calculated divider to be
1062  *      rounded to the closest integer instead of the down one.
1063  * CLK_MULTIPLIER_BIG_ENDIAN - By default little endian register accesses are
1064  *      used for the multiplier register.  Setting this flag makes the register
1065  *      accesses big endian.
1066  */
1067 struct clk_multiplier {
1068         struct clk_hw   hw;
1069         void __iomem    *reg;
1070         u8              shift;
1071         u8              width;
1072         u8              flags;
1073         spinlock_t      *lock;
1074 };
1075
1076 #define to_clk_multiplier(_hw) container_of(_hw, struct clk_multiplier, hw)
1077
1078 #define CLK_MULTIPLIER_ZERO_BYPASS      BIT(0)
1079 #define CLK_MULTIPLIER_ROUND_CLOSEST    BIT(1)
1080 #define CLK_MULTIPLIER_BIG_ENDIAN       BIT(2)
1081
1082 extern const struct clk_ops clk_multiplier_ops;
1083
1084 /***
1085  * struct clk_composite - aggregate clock of mux, divider and gate clocks
1086  *
1087  * @hw:         handle between common and hardware-specific interfaces
1088  * @mux_hw:     handle between composite and hardware-specific mux clock
1089  * @rate_hw:    handle between composite and hardware-specific rate clock
1090  * @gate_hw:    handle between composite and hardware-specific gate clock
1091  * @mux_ops:    clock ops for mux
1092  * @rate_ops:   clock ops for rate
1093  * @gate_ops:   clock ops for gate
1094  */
1095 struct clk_composite {
1096         struct clk_hw   hw;
1097         struct clk_ops  ops;
1098
1099         struct clk_hw   *mux_hw;
1100         struct clk_hw   *rate_hw;
1101         struct clk_hw   *gate_hw;
1102
1103         const struct clk_ops    *mux_ops;
1104         const struct clk_ops    *rate_ops;
1105         const struct clk_ops    *gate_ops;
1106 };
1107
1108 #define to_clk_composite(_hw) container_of(_hw, struct clk_composite, hw)
1109
1110 struct clk *clk_register_composite(struct device *dev, const char *name,
1111                 const char * const *parent_names, int num_parents,
1112                 struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
1113                 struct clk_hw *rate_hw, const struct clk_ops *rate_ops,
1114                 struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
1115                 unsigned long flags);
1116 struct clk *clk_register_composite_pdata(struct device *dev, const char *name,
1117                 const struct clk_parent_data *parent_data, int num_parents,
1118                 struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
1119                 struct clk_hw *rate_hw, const struct clk_ops *rate_ops,
1120                 struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
1121                 unsigned long flags);
1122 void clk_unregister_composite(struct clk *clk);
1123 struct clk_hw *clk_hw_register_composite(struct device *dev, const char *name,
1124                 const char * const *parent_names, int num_parents,
1125                 struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
1126                 struct clk_hw *rate_hw, const struct clk_ops *rate_ops,
1127                 struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
1128                 unsigned long flags);
1129 struct clk_hw *clk_hw_register_composite_pdata(struct device *dev,
1130                 const char *name,
1131                 const struct clk_parent_data *parent_data, int num_parents,
1132                 struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
1133                 struct clk_hw *rate_hw, const struct clk_ops *rate_ops,
1134                 struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
1135                 unsigned long flags);
1136 struct clk_hw *devm_clk_hw_register_composite_pdata(struct device *dev,
1137                 const char *name, const struct clk_parent_data *parent_data,
1138                 int num_parents,
1139                 struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
1140                 struct clk_hw *rate_hw, const struct clk_ops *rate_ops,
1141                 struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
1142                 unsigned long flags);
1143 void clk_hw_unregister_composite(struct clk_hw *hw);
1144
1145 struct clk *clk_register(struct device *dev, struct clk_hw *hw);
1146 struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw);
1147
1148 int __must_check clk_hw_register(struct device *dev, struct clk_hw *hw);
1149 int __must_check devm_clk_hw_register(struct device *dev, struct clk_hw *hw);
1150 int __must_check of_clk_hw_register(struct device_node *node, struct clk_hw *hw);
1151
1152 void clk_unregister(struct clk *clk);
1153 void devm_clk_unregister(struct device *dev, struct clk *clk);
1154
1155 void clk_hw_unregister(struct clk_hw *hw);
1156 void devm_clk_hw_unregister(struct device *dev, struct clk_hw *hw);
1157
1158 /* helper functions */
1159 const char *__clk_get_name(const struct clk *clk);
1160 const char *clk_hw_get_name(const struct clk_hw *hw);
1161 #ifdef CONFIG_COMMON_CLK
1162 struct clk_hw *__clk_get_hw(struct clk *clk);
1163 #else
1164 static inline struct clk_hw *__clk_get_hw(struct clk *clk)
1165 {
1166         return (struct clk_hw *)clk;
1167 }
1168 #endif
1169
1170 struct clk *clk_hw_get_clk(struct clk_hw *hw, const char *con_id);
1171 struct clk *devm_clk_hw_get_clk(struct device *dev, struct clk_hw *hw,
1172                                 const char *con_id);
1173
1174 unsigned int clk_hw_get_num_parents(const struct clk_hw *hw);
1175 struct clk_hw *clk_hw_get_parent(const struct clk_hw *hw);
1176 struct clk_hw *clk_hw_get_parent_by_index(const struct clk_hw *hw,
1177                                           unsigned int index);
1178 int clk_hw_get_parent_index(struct clk_hw *hw);
1179 int clk_hw_set_parent(struct clk_hw *hw, struct clk_hw *new_parent);
1180 unsigned int __clk_get_enable_count(struct clk *clk);
1181 unsigned long clk_hw_get_rate(const struct clk_hw *hw);
1182 unsigned long clk_hw_get_flags(const struct clk_hw *hw);
1183 #define clk_hw_can_set_rate_parent(hw) \
1184         (clk_hw_get_flags((hw)) & CLK_SET_RATE_PARENT)
1185
1186 bool clk_hw_is_prepared(const struct clk_hw *hw);
1187 bool clk_hw_rate_is_protected(const struct clk_hw *hw);
1188 bool clk_hw_is_enabled(const struct clk_hw *hw);
1189 bool __clk_is_enabled(struct clk *clk);
1190 struct clk *__clk_lookup(const char *name);
1191 int __clk_mux_determine_rate(struct clk_hw *hw,
1192                              struct clk_rate_request *req);
1193 int __clk_determine_rate(struct clk_hw *core, struct clk_rate_request *req);
1194 int __clk_mux_determine_rate_closest(struct clk_hw *hw,
1195                                      struct clk_rate_request *req);
1196 int clk_mux_determine_rate_flags(struct clk_hw *hw,
1197                                  struct clk_rate_request *req,
1198                                  unsigned long flags);
1199 void clk_hw_reparent(struct clk_hw *hw, struct clk_hw *new_parent);
1200 void clk_hw_set_rate_range(struct clk_hw *hw, unsigned long min_rate,
1201                            unsigned long max_rate);
1202
1203 static inline void __clk_hw_set_clk(struct clk_hw *dst, struct clk_hw *src)
1204 {
1205         dst->clk = src->clk;
1206         dst->core = src->core;
1207 }
1208
1209 static inline long divider_round_rate(struct clk_hw *hw, unsigned long rate,
1210                                       unsigned long *prate,
1211                                       const struct clk_div_table *table,
1212                                       u8 width, unsigned long flags)
1213 {
1214         return divider_round_rate_parent(hw, clk_hw_get_parent(hw),
1215                                          rate, prate, table, width, flags);
1216 }
1217
1218 static inline long divider_ro_round_rate(struct clk_hw *hw, unsigned long rate,
1219                                          unsigned long *prate,
1220                                          const struct clk_div_table *table,
1221                                          u8 width, unsigned long flags,
1222                                          unsigned int val)
1223 {
1224         return divider_ro_round_rate_parent(hw, clk_hw_get_parent(hw),
1225                                             rate, prate, table, width, flags,
1226                                             val);
1227 }
1228
1229 /*
1230  * FIXME clock api without lock protection
1231  */
1232 unsigned long clk_hw_round_rate(struct clk_hw *hw, unsigned long rate);
1233
1234 struct clk_onecell_data {
1235         struct clk **clks;
1236         unsigned int clk_num;
1237 };
1238
1239 struct clk_hw_onecell_data {
1240         unsigned int num;
1241         struct clk_hw *hws[];
1242 };
1243
1244 #define CLK_OF_DECLARE(name, compat, fn) OF_DECLARE_1(clk, name, compat, fn)
1245
1246 /*
1247  * Use this macro when you have a driver that requires two initialization
1248  * routines, one at of_clk_init(), and one at platform device probe
1249  */
1250 #define CLK_OF_DECLARE_DRIVER(name, compat, fn) \
1251         static void __init name##_of_clk_init_driver(struct device_node *np) \
1252         {                                                               \
1253                 of_node_clear_flag(np, OF_POPULATED);                   \
1254                 fn(np);                                                 \
1255         }                                                               \
1256         OF_DECLARE_1(clk, name, compat, name##_of_clk_init_driver)
1257
1258 #define CLK_HW_INIT(_name, _parent, _ops, _flags)               \
1259         (&(struct clk_init_data) {                              \
1260                 .flags          = _flags,                       \
1261                 .name           = _name,                        \
1262                 .parent_names   = (const char *[]) { _parent }, \
1263                 .num_parents    = 1,                            \
1264                 .ops            = _ops,                         \
1265         })
1266
1267 #define CLK_HW_INIT_HW(_name, _parent, _ops, _flags)                    \
1268         (&(struct clk_init_data) {                                      \
1269                 .flags          = _flags,                               \
1270                 .name           = _name,                                \
1271                 .parent_hws     = (const struct clk_hw*[]) { _parent }, \
1272                 .num_parents    = 1,                                    \
1273                 .ops            = _ops,                                 \
1274         })
1275
1276 /*
1277  * This macro is intended for drivers to be able to share the otherwise
1278  * individual struct clk_hw[] compound literals created by the compiler
1279  * when using CLK_HW_INIT_HW. It does NOT support multiple parents.
1280  */
1281 #define CLK_HW_INIT_HWS(_name, _parent, _ops, _flags)                   \
1282         (&(struct clk_init_data) {                                      \
1283                 .flags          = _flags,                               \
1284                 .name           = _name,                                \
1285                 .parent_hws     = _parent,                              \
1286                 .num_parents    = 1,                                    \
1287                 .ops            = _ops,                                 \
1288         })
1289
1290 #define CLK_HW_INIT_FW_NAME(_name, _parent, _ops, _flags)               \
1291         (&(struct clk_init_data) {                                      \
1292                 .flags          = _flags,                               \
1293                 .name           = _name,                                \
1294                 .parent_data    = (const struct clk_parent_data[]) {    \
1295                                         { .fw_name = _parent },         \
1296                                   },                                    \
1297                 .num_parents    = 1,                                    \
1298                 .ops            = _ops,                                 \
1299         })
1300
1301 #define CLK_HW_INIT_PARENTS(_name, _parents, _ops, _flags)      \
1302         (&(struct clk_init_data) {                              \
1303                 .flags          = _flags,                       \
1304                 .name           = _name,                        \
1305                 .parent_names   = _parents,                     \
1306                 .num_parents    = ARRAY_SIZE(_parents),         \
1307                 .ops            = _ops,                         \
1308         })
1309
1310 #define CLK_HW_INIT_PARENTS_HW(_name, _parents, _ops, _flags)   \
1311         (&(struct clk_init_data) {                              \
1312                 .flags          = _flags,                       \
1313                 .name           = _name,                        \
1314                 .parent_hws     = _parents,                     \
1315                 .num_parents    = ARRAY_SIZE(_parents),         \
1316                 .ops            = _ops,                         \
1317         })
1318
1319 #define CLK_HW_INIT_PARENTS_DATA(_name, _parents, _ops, _flags) \
1320         (&(struct clk_init_data) {                              \
1321                 .flags          = _flags,                       \
1322                 .name           = _name,                        \
1323                 .parent_data    = _parents,                     \
1324                 .num_parents    = ARRAY_SIZE(_parents),         \
1325                 .ops            = _ops,                         \
1326         })
1327
1328 #define CLK_HW_INIT_NO_PARENT(_name, _ops, _flags)      \
1329         (&(struct clk_init_data) {                      \
1330                 .flags          = _flags,               \
1331                 .name           = _name,                \
1332                 .parent_names   = NULL,                 \
1333                 .num_parents    = 0,                    \
1334                 .ops            = _ops,                 \
1335         })
1336
1337 #define CLK_FIXED_FACTOR(_struct, _name, _parent,                       \
1338                         _div, _mult, _flags)                            \
1339         struct clk_fixed_factor _struct = {                             \
1340                 .div            = _div,                                 \
1341                 .mult           = _mult,                                \
1342                 .hw.init        = CLK_HW_INIT(_name,                    \
1343                                               _parent,                  \
1344                                               &clk_fixed_factor_ops,    \
1345                                               _flags),                  \
1346         }
1347
1348 #define CLK_FIXED_FACTOR_HW(_struct, _name, _parent,                    \
1349                             _div, _mult, _flags)                        \
1350         struct clk_fixed_factor _struct = {                             \
1351                 .div            = _div,                                 \
1352                 .mult           = _mult,                                \
1353                 .hw.init        = CLK_HW_INIT_HW(_name,                 \
1354                                                  _parent,               \
1355                                                  &clk_fixed_factor_ops, \
1356                                                  _flags),               \
1357         }
1358
1359 /*
1360  * This macro allows the driver to reuse the _parent array for multiple
1361  * fixed factor clk declarations.
1362  */
1363 #define CLK_FIXED_FACTOR_HWS(_struct, _name, _parent,                   \
1364                              _div, _mult, _flags)                       \
1365         struct clk_fixed_factor _struct = {                             \
1366                 .div            = _div,                                 \
1367                 .mult           = _mult,                                \
1368                 .hw.init        = CLK_HW_INIT_HWS(_name,                \
1369                                                   _parent,              \
1370                                                   &clk_fixed_factor_ops, \
1371                                                   _flags),      \
1372         }
1373
1374 #define CLK_FIXED_FACTOR_FW_NAME(_struct, _name, _parent,               \
1375                                  _div, _mult, _flags)                   \
1376         struct clk_fixed_factor _struct = {                             \
1377                 .div            = _div,                                 \
1378                 .mult           = _mult,                                \
1379                 .hw.init        = CLK_HW_INIT_FW_NAME(_name,            \
1380                                                       _parent,          \
1381                                                       &clk_fixed_factor_ops, \
1382                                                       _flags),          \
1383         }
1384
1385 #ifdef CONFIG_OF
1386 int of_clk_add_provider(struct device_node *np,
1387                         struct clk *(*clk_src_get)(struct of_phandle_args *args,
1388                                                    void *data),
1389                         void *data);
1390 int of_clk_add_hw_provider(struct device_node *np,
1391                            struct clk_hw *(*get)(struct of_phandle_args *clkspec,
1392                                                  void *data),
1393                            void *data);
1394 int devm_of_clk_add_hw_provider(struct device *dev,
1395                            struct clk_hw *(*get)(struct of_phandle_args *clkspec,
1396                                                  void *data),
1397                            void *data);
1398 void of_clk_del_provider(struct device_node *np);
1399 void devm_of_clk_del_provider(struct device *dev);
1400 struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec,
1401                                   void *data);
1402 struct clk_hw *of_clk_hw_simple_get(struct of_phandle_args *clkspec,
1403                                     void *data);
1404 struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data);
1405 struct clk_hw *of_clk_hw_onecell_get(struct of_phandle_args *clkspec,
1406                                      void *data);
1407 int of_clk_parent_fill(struct device_node *np, const char **parents,
1408                        unsigned int size);
1409 int of_clk_detect_critical(struct device_node *np, int index,
1410                             unsigned long *flags);
1411
1412 #else /* !CONFIG_OF */
1413
1414 static inline int of_clk_add_provider(struct device_node *np,
1415                         struct clk *(*clk_src_get)(struct of_phandle_args *args,
1416                                                    void *data),
1417                         void *data)
1418 {
1419         return 0;
1420 }
1421 static inline int of_clk_add_hw_provider(struct device_node *np,
1422                         struct clk_hw *(*get)(struct of_phandle_args *clkspec,
1423                                               void *data),
1424                         void *data)
1425 {
1426         return 0;
1427 }
1428 static inline int devm_of_clk_add_hw_provider(struct device *dev,
1429                            struct clk_hw *(*get)(struct of_phandle_args *clkspec,
1430                                                  void *data),
1431                            void *data)
1432 {
1433         return 0;
1434 }
1435 static inline void of_clk_del_provider(struct device_node *np) {}
1436 static inline void devm_of_clk_del_provider(struct device *dev) {}
1437 static inline struct clk *of_clk_src_simple_get(
1438         struct of_phandle_args *clkspec, void *data)
1439 {
1440         return ERR_PTR(-ENOENT);
1441 }
1442 static inline struct clk_hw *
1443 of_clk_hw_simple_get(struct of_phandle_args *clkspec, void *data)
1444 {
1445         return ERR_PTR(-ENOENT);
1446 }
1447 static inline struct clk *of_clk_src_onecell_get(
1448         struct of_phandle_args *clkspec, void *data)
1449 {
1450         return ERR_PTR(-ENOENT);
1451 }
1452 static inline struct clk_hw *
1453 of_clk_hw_onecell_get(struct of_phandle_args *clkspec, void *data)
1454 {
1455         return ERR_PTR(-ENOENT);
1456 }
1457 static inline int of_clk_parent_fill(struct device_node *np,
1458                                      const char **parents, unsigned int size)
1459 {
1460         return 0;
1461 }
1462 static inline int of_clk_detect_critical(struct device_node *np, int index,
1463                                           unsigned long *flags)
1464 {
1465         return 0;
1466 }
1467 #endif /* CONFIG_OF */
1468
1469 void clk_gate_restore_context(struct clk_hw *hw);
1470
1471 #endif /* CLK_PROVIDER_H */