2 * Disk Array driver for HP Smart Array SAS controllers
3 * Copyright 2016 Microsemi Corporation
4 * Copyright 2014-2015 PMC-Sierra, Inc.
5 * Copyright 2000,2009-2015 Hewlett-Packard Development Company, L.P.
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; version 2 of the License.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
14 * NON INFRINGEMENT. See the GNU General Public License for more details.
16 * Questions/Comments/Bugfixes to esc.storagedev@microsemi.com
20 #include <linux/module.h>
21 #include <linux/interrupt.h>
22 #include <linux/types.h>
23 #include <linux/pci.h>
24 #include <linux/pci-aspm.h>
25 #include <linux/kernel.h>
26 #include <linux/slab.h>
27 #include <linux/delay.h>
29 #include <linux/timer.h>
30 #include <linux/init.h>
31 #include <linux/spinlock.h>
32 #include <linux/compat.h>
33 #include <linux/blktrace_api.h>
34 #include <linux/uaccess.h>
36 #include <linux/dma-mapping.h>
37 #include <linux/completion.h>
38 #include <linux/moduleparam.h>
39 #include <scsi/scsi.h>
40 #include <scsi/scsi_cmnd.h>
41 #include <scsi/scsi_device.h>
42 #include <scsi/scsi_host.h>
43 #include <scsi/scsi_tcq.h>
44 #include <scsi/scsi_eh.h>
45 #include <scsi/scsi_transport_sas.h>
46 #include <scsi/scsi_dbg.h>
47 #include <linux/cciss_ioctl.h>
48 #include <linux/string.h>
49 #include <linux/bitmap.h>
50 #include <linux/atomic.h>
51 #include <linux/jiffies.h>
52 #include <linux/percpu-defs.h>
53 #include <linux/percpu.h>
54 #include <asm/unaligned.h>
55 #include <asm/div64.h>
60 * HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.'
61 * with an optional trailing '-' followed by a byte value (0-255).
63 #define HPSA_DRIVER_VERSION "3.4.20-170"
64 #define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")"
67 /* How long to wait for CISS doorbell communication */
68 #define CLEAR_EVENT_WAIT_INTERVAL 20 /* ms for each msleep() call */
69 #define MODE_CHANGE_WAIT_INTERVAL 10 /* ms for each msleep() call */
70 #define MAX_CLEAR_EVENT_WAIT 30000 /* times 20 ms = 600 s */
71 #define MAX_MODE_CHANGE_WAIT 2000 /* times 10 ms = 20 s */
72 #define MAX_IOCTL_CONFIG_WAIT 1000
74 /*define how many times we will try a command because of bus resets */
75 #define MAX_CMD_RETRIES 3
76 /* How long to wait before giving up on a command */
77 #define HPSA_EH_PTRAID_TIMEOUT (240 * HZ)
79 /* Embedded module documentation macros - see modules.h */
80 MODULE_AUTHOR("Hewlett-Packard Company");
81 MODULE_DESCRIPTION("Driver for HP Smart Array Controller version " \
83 MODULE_SUPPORTED_DEVICE("HP Smart Array Controllers");
84 MODULE_VERSION(HPSA_DRIVER_VERSION);
85 MODULE_LICENSE("GPL");
86 MODULE_ALIAS("cciss");
88 static int hpsa_simple_mode;
89 module_param(hpsa_simple_mode, int, S_IRUGO|S_IWUSR);
90 MODULE_PARM_DESC(hpsa_simple_mode,
91 "Use 'simple mode' rather than 'performant mode'");
93 /* define the PCI info for the cards we can control */
94 static const struct pci_device_id hpsa_pci_device_id[] = {
95 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3241},
96 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3243},
97 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245},
98 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247},
99 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249},
100 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324A},
101 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324B},
102 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3233},
103 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3350},
104 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3351},
105 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3352},
106 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3353},
107 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3354},
108 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3355},
109 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3356},
110 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103c, 0x1920},
111 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1921},
112 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1922},
113 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1923},
114 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1924},
115 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103c, 0x1925},
116 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1926},
117 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1928},
118 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1929},
119 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21BD},
120 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21BE},
121 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21BF},
122 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C0},
123 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C1},
124 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C2},
125 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C3},
126 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C4},
127 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C5},
128 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C6},
129 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C7},
130 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C8},
131 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21C9},
132 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21CA},
133 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21CB},
134 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21CC},
135 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21CD},
136 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSI, 0x103C, 0x21CE},
137 {PCI_VENDOR_ID_ADAPTEC2, 0x0290, 0x9005, 0x0580},
138 {PCI_VENDOR_ID_ADAPTEC2, 0x0290, 0x9005, 0x0581},
139 {PCI_VENDOR_ID_ADAPTEC2, 0x0290, 0x9005, 0x0582},
140 {PCI_VENDOR_ID_ADAPTEC2, 0x0290, 0x9005, 0x0583},
141 {PCI_VENDOR_ID_ADAPTEC2, 0x0290, 0x9005, 0x0584},
142 {PCI_VENDOR_ID_ADAPTEC2, 0x0290, 0x9005, 0x0585},
143 {PCI_VENDOR_ID_HP_3PAR, 0x0075, 0x1590, 0x0076},
144 {PCI_VENDOR_ID_HP_3PAR, 0x0075, 0x1590, 0x0087},
145 {PCI_VENDOR_ID_HP_3PAR, 0x0075, 0x1590, 0x007D},
146 {PCI_VENDOR_ID_HP_3PAR, 0x0075, 0x1590, 0x0088},
147 {PCI_VENDOR_ID_HP, 0x333f, 0x103c, 0x333f},
148 {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
149 PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
150 {PCI_VENDOR_ID_COMPAQ, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
151 PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
155 MODULE_DEVICE_TABLE(pci, hpsa_pci_device_id);
157 /* board_id = Subsystem Device ID & Vendor ID
158 * product = Marketing Name for the board
159 * access = Address of the struct of function pointers
161 static struct board_type products[] = {
162 {0x40700E11, "Smart Array 5300", &SA5A_access},
163 {0x40800E11, "Smart Array 5i", &SA5B_access},
164 {0x40820E11, "Smart Array 532", &SA5B_access},
165 {0x40830E11, "Smart Array 5312", &SA5B_access},
166 {0x409A0E11, "Smart Array 641", &SA5A_access},
167 {0x409B0E11, "Smart Array 642", &SA5A_access},
168 {0x409C0E11, "Smart Array 6400", &SA5A_access},
169 {0x409D0E11, "Smart Array 6400 EM", &SA5A_access},
170 {0x40910E11, "Smart Array 6i", &SA5A_access},
171 {0x3225103C, "Smart Array P600", &SA5A_access},
172 {0x3223103C, "Smart Array P800", &SA5A_access},
173 {0x3234103C, "Smart Array P400", &SA5A_access},
174 {0x3235103C, "Smart Array P400i", &SA5A_access},
175 {0x3211103C, "Smart Array E200i", &SA5A_access},
176 {0x3212103C, "Smart Array E200", &SA5A_access},
177 {0x3213103C, "Smart Array E200i", &SA5A_access},
178 {0x3214103C, "Smart Array E200i", &SA5A_access},
179 {0x3215103C, "Smart Array E200i", &SA5A_access},
180 {0x3237103C, "Smart Array E500", &SA5A_access},
181 {0x323D103C, "Smart Array P700m", &SA5A_access},
182 {0x3241103C, "Smart Array P212", &SA5_access},
183 {0x3243103C, "Smart Array P410", &SA5_access},
184 {0x3245103C, "Smart Array P410i", &SA5_access},
185 {0x3247103C, "Smart Array P411", &SA5_access},
186 {0x3249103C, "Smart Array P812", &SA5_access},
187 {0x324A103C, "Smart Array P712m", &SA5_access},
188 {0x324B103C, "Smart Array P711m", &SA5_access},
189 {0x3233103C, "HP StorageWorks 1210m", &SA5_access}, /* alias of 333f */
190 {0x3350103C, "Smart Array P222", &SA5_access},
191 {0x3351103C, "Smart Array P420", &SA5_access},
192 {0x3352103C, "Smart Array P421", &SA5_access},
193 {0x3353103C, "Smart Array P822", &SA5_access},
194 {0x3354103C, "Smart Array P420i", &SA5_access},
195 {0x3355103C, "Smart Array P220i", &SA5_access},
196 {0x3356103C, "Smart Array P721m", &SA5_access},
197 {0x1920103C, "Smart Array P430i", &SA5_access},
198 {0x1921103C, "Smart Array P830i", &SA5_access},
199 {0x1922103C, "Smart Array P430", &SA5_access},
200 {0x1923103C, "Smart Array P431", &SA5_access},
201 {0x1924103C, "Smart Array P830", &SA5_access},
202 {0x1925103C, "Smart Array P831", &SA5_access},
203 {0x1926103C, "Smart Array P731m", &SA5_access},
204 {0x1928103C, "Smart Array P230i", &SA5_access},
205 {0x1929103C, "Smart Array P530", &SA5_access},
206 {0x21BD103C, "Smart Array P244br", &SA5_access},
207 {0x21BE103C, "Smart Array P741m", &SA5_access},
208 {0x21BF103C, "Smart HBA H240ar", &SA5_access},
209 {0x21C0103C, "Smart Array P440ar", &SA5_access},
210 {0x21C1103C, "Smart Array P840ar", &SA5_access},
211 {0x21C2103C, "Smart Array P440", &SA5_access},
212 {0x21C3103C, "Smart Array P441", &SA5_access},
213 {0x21C4103C, "Smart Array", &SA5_access},
214 {0x21C5103C, "Smart Array P841", &SA5_access},
215 {0x21C6103C, "Smart HBA H244br", &SA5_access},
216 {0x21C7103C, "Smart HBA H240", &SA5_access},
217 {0x21C8103C, "Smart HBA H241", &SA5_access},
218 {0x21C9103C, "Smart Array", &SA5_access},
219 {0x21CA103C, "Smart Array P246br", &SA5_access},
220 {0x21CB103C, "Smart Array P840", &SA5_access},
221 {0x21CC103C, "Smart Array", &SA5_access},
222 {0x21CD103C, "Smart Array", &SA5_access},
223 {0x21CE103C, "Smart HBA", &SA5_access},
224 {0x05809005, "SmartHBA-SA", &SA5_access},
225 {0x05819005, "SmartHBA-SA 8i", &SA5_access},
226 {0x05829005, "SmartHBA-SA 8i8e", &SA5_access},
227 {0x05839005, "SmartHBA-SA 8e", &SA5_access},
228 {0x05849005, "SmartHBA-SA 16i", &SA5_access},
229 {0x05859005, "SmartHBA-SA 4i4e", &SA5_access},
230 {0x00761590, "HP Storage P1224 Array Controller", &SA5_access},
231 {0x00871590, "HP Storage P1224e Array Controller", &SA5_access},
232 {0x007D1590, "HP Storage P1228 Array Controller", &SA5_access},
233 {0x00881590, "HP Storage P1228e Array Controller", &SA5_access},
234 {0x333f103c, "HP StorageWorks 1210m Array Controller", &SA5_access},
235 {0xFFFF103C, "Unknown Smart Array", &SA5_access},
238 static struct scsi_transport_template *hpsa_sas_transport_template;
239 static int hpsa_add_sas_host(struct ctlr_info *h);
240 static void hpsa_delete_sas_host(struct ctlr_info *h);
241 static int hpsa_add_sas_device(struct hpsa_sas_node *hpsa_sas_node,
242 struct hpsa_scsi_dev_t *device);
243 static void hpsa_remove_sas_device(struct hpsa_scsi_dev_t *device);
244 static struct hpsa_scsi_dev_t
245 *hpsa_find_device_by_sas_rphy(struct ctlr_info *h,
246 struct sas_rphy *rphy);
248 #define SCSI_CMD_BUSY ((struct scsi_cmnd *)&hpsa_cmd_busy)
249 static const struct scsi_cmnd hpsa_cmd_busy;
250 #define SCSI_CMD_IDLE ((struct scsi_cmnd *)&hpsa_cmd_idle)
251 static const struct scsi_cmnd hpsa_cmd_idle;
252 static int number_of_controllers;
254 static irqreturn_t do_hpsa_intr_intx(int irq, void *dev_id);
255 static irqreturn_t do_hpsa_intr_msi(int irq, void *dev_id);
256 static int hpsa_ioctl(struct scsi_device *dev, unsigned int cmd,
260 static int hpsa_compat_ioctl(struct scsi_device *dev, unsigned int cmd,
264 static void cmd_free(struct ctlr_info *h, struct CommandList *c);
265 static struct CommandList *cmd_alloc(struct ctlr_info *h);
266 static void cmd_tagged_free(struct ctlr_info *h, struct CommandList *c);
267 static struct CommandList *cmd_tagged_alloc(struct ctlr_info *h,
268 struct scsi_cmnd *scmd);
269 static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
270 void *buff, size_t size, u16 page_code, unsigned char *scsi3addr,
272 static void hpsa_free_cmd_pool(struct ctlr_info *h);
273 #define VPD_PAGE (1 << 8)
274 #define HPSA_SIMPLE_ERROR_BITS 0x03
276 static int hpsa_scsi_queue_command(struct Scsi_Host *h, struct scsi_cmnd *cmd);
277 static void hpsa_scan_start(struct Scsi_Host *);
278 static int hpsa_scan_finished(struct Scsi_Host *sh,
279 unsigned long elapsed_time);
280 static int hpsa_change_queue_depth(struct scsi_device *sdev, int qdepth);
282 static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd);
283 static int hpsa_slave_alloc(struct scsi_device *sdev);
284 static int hpsa_slave_configure(struct scsi_device *sdev);
285 static void hpsa_slave_destroy(struct scsi_device *sdev);
287 static void hpsa_update_scsi_devices(struct ctlr_info *h);
288 static int check_for_unit_attention(struct ctlr_info *h,
289 struct CommandList *c);
290 static void check_ioctl_unit_attention(struct ctlr_info *h,
291 struct CommandList *c);
292 /* performant mode helper functions */
293 static void calc_bucket_map(int *bucket, int num_buckets,
294 int nsgs, int min_blocks, u32 *bucket_map);
295 static void hpsa_free_performant_mode(struct ctlr_info *h);
296 static int hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h);
297 static inline u32 next_command(struct ctlr_info *h, u8 q);
298 static int hpsa_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr,
299 u32 *cfg_base_addr, u64 *cfg_base_addr_index,
301 static int hpsa_pci_find_memory_BAR(struct pci_dev *pdev,
302 unsigned long *memory_bar);
303 static int hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id,
305 static int wait_for_device_to_become_ready(struct ctlr_info *h,
306 unsigned char lunaddr[],
308 static int hpsa_wait_for_board_state(struct pci_dev *pdev, void __iomem *vaddr,
310 static inline void finish_cmd(struct CommandList *c);
311 static int hpsa_wait_for_mode_change_ack(struct ctlr_info *h);
312 #define BOARD_NOT_READY 0
313 #define BOARD_READY 1
314 static void hpsa_drain_accel_commands(struct ctlr_info *h);
315 static void hpsa_flush_cache(struct ctlr_info *h);
316 static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h,
317 struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len,
318 u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk);
319 static void hpsa_command_resubmit_worker(struct work_struct *work);
320 static u32 lockup_detected(struct ctlr_info *h);
321 static int detect_controller_lockup(struct ctlr_info *h);
322 static void hpsa_disable_rld_caching(struct ctlr_info *h);
323 static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info *h,
324 struct ReportExtendedLUNdata *buf, int bufsize);
325 static bool hpsa_vpd_page_supported(struct ctlr_info *h,
326 unsigned char scsi3addr[], u8 page);
327 static int hpsa_luns_changed(struct ctlr_info *h);
328 static bool hpsa_cmd_dev_match(struct ctlr_info *h, struct CommandList *c,
329 struct hpsa_scsi_dev_t *dev,
330 unsigned char *scsi3addr);
332 static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev)
334 unsigned long *priv = shost_priv(sdev->host);
335 return (struct ctlr_info *) *priv;
338 static inline struct ctlr_info *shost_to_hba(struct Scsi_Host *sh)
340 unsigned long *priv = shost_priv(sh);
341 return (struct ctlr_info *) *priv;
344 static inline bool hpsa_is_cmd_idle(struct CommandList *c)
346 return c->scsi_cmd == SCSI_CMD_IDLE;
349 /* extract sense key, asc, and ascq from sense data. -1 means invalid. */
350 static void decode_sense_data(const u8 *sense_data, int sense_data_len,
351 u8 *sense_key, u8 *asc, u8 *ascq)
353 struct scsi_sense_hdr sshdr;
360 if (sense_data_len < 1)
363 rc = scsi_normalize_sense(sense_data, sense_data_len, &sshdr);
365 *sense_key = sshdr.sense_key;
371 static int check_for_unit_attention(struct ctlr_info *h,
372 struct CommandList *c)
374 u8 sense_key, asc, ascq;
377 if (c->err_info->SenseLen > sizeof(c->err_info->SenseInfo))
378 sense_len = sizeof(c->err_info->SenseInfo);
380 sense_len = c->err_info->SenseLen;
382 decode_sense_data(c->err_info->SenseInfo, sense_len,
383 &sense_key, &asc, &ascq);
384 if (sense_key != UNIT_ATTENTION || asc == 0xff)
389 dev_warn(&h->pdev->dev,
390 "%s: a state change detected, command retried\n",
394 dev_warn(&h->pdev->dev,
395 "%s: LUN failure detected\n", h->devname);
397 case REPORT_LUNS_CHANGED:
398 dev_warn(&h->pdev->dev,
399 "%s: report LUN data changed\n", h->devname);
401 * Note: this REPORT_LUNS_CHANGED condition only occurs on the external
402 * target (array) devices.
406 dev_warn(&h->pdev->dev,
407 "%s: a power on or device reset detected\n",
410 case UNIT_ATTENTION_CLEARED:
411 dev_warn(&h->pdev->dev,
412 "%s: unit attention cleared by another initiator\n",
416 dev_warn(&h->pdev->dev,
417 "%s: unknown unit attention detected\n",
424 static int check_for_busy(struct ctlr_info *h, struct CommandList *c)
426 if (c->err_info->CommandStatus != CMD_TARGET_STATUS ||
427 (c->err_info->ScsiStatus != SAM_STAT_BUSY &&
428 c->err_info->ScsiStatus != SAM_STAT_TASK_SET_FULL))
430 dev_warn(&h->pdev->dev, HPSA "device busy");
434 static u32 lockup_detected(struct ctlr_info *h);
435 static ssize_t host_show_lockup_detected(struct device *dev,
436 struct device_attribute *attr, char *buf)
440 struct Scsi_Host *shost = class_to_shost(dev);
442 h = shost_to_hba(shost);
443 ld = lockup_detected(h);
445 return sprintf(buf, "ld=%d\n", ld);
448 static ssize_t host_store_hp_ssd_smart_path_status(struct device *dev,
449 struct device_attribute *attr,
450 const char *buf, size_t count)
454 struct Scsi_Host *shost = class_to_shost(dev);
457 if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
459 len = count > sizeof(tmpbuf) - 1 ? sizeof(tmpbuf) - 1 : count;
460 strncpy(tmpbuf, buf, len);
462 if (sscanf(tmpbuf, "%d", &status) != 1)
464 h = shost_to_hba(shost);
465 h->acciopath_status = !!status;
466 dev_warn(&h->pdev->dev,
467 "hpsa: HP SSD Smart Path %s via sysfs update.\n",
468 h->acciopath_status ? "enabled" : "disabled");
472 static ssize_t host_store_raid_offload_debug(struct device *dev,
473 struct device_attribute *attr,
474 const char *buf, size_t count)
476 int debug_level, len;
478 struct Scsi_Host *shost = class_to_shost(dev);
481 if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
483 len = count > sizeof(tmpbuf) - 1 ? sizeof(tmpbuf) - 1 : count;
484 strncpy(tmpbuf, buf, len);
486 if (sscanf(tmpbuf, "%d", &debug_level) != 1)
490 h = shost_to_hba(shost);
491 h->raid_offload_debug = debug_level;
492 dev_warn(&h->pdev->dev, "hpsa: Set raid_offload_debug level = %d\n",
493 h->raid_offload_debug);
497 static ssize_t host_store_rescan(struct device *dev,
498 struct device_attribute *attr,
499 const char *buf, size_t count)
502 struct Scsi_Host *shost = class_to_shost(dev);
503 h = shost_to_hba(shost);
504 hpsa_scan_start(h->scsi_host);
508 static ssize_t host_show_firmware_revision(struct device *dev,
509 struct device_attribute *attr, char *buf)
512 struct Scsi_Host *shost = class_to_shost(dev);
513 unsigned char *fwrev;
515 h = shost_to_hba(shost);
516 if (!h->hba_inquiry_data)
518 fwrev = &h->hba_inquiry_data[32];
519 return snprintf(buf, 20, "%c%c%c%c\n",
520 fwrev[0], fwrev[1], fwrev[2], fwrev[3]);
523 static ssize_t host_show_commands_outstanding(struct device *dev,
524 struct device_attribute *attr, char *buf)
526 struct Scsi_Host *shost = class_to_shost(dev);
527 struct ctlr_info *h = shost_to_hba(shost);
529 return snprintf(buf, 20, "%d\n",
530 atomic_read(&h->commands_outstanding));
533 static ssize_t host_show_transport_mode(struct device *dev,
534 struct device_attribute *attr, char *buf)
537 struct Scsi_Host *shost = class_to_shost(dev);
539 h = shost_to_hba(shost);
540 return snprintf(buf, 20, "%s\n",
541 h->transMethod & CFGTBL_Trans_Performant ?
542 "performant" : "simple");
545 static ssize_t host_show_hp_ssd_smart_path_status(struct device *dev,
546 struct device_attribute *attr, char *buf)
549 struct Scsi_Host *shost = class_to_shost(dev);
551 h = shost_to_hba(shost);
552 return snprintf(buf, 30, "HP SSD Smart Path %s\n",
553 (h->acciopath_status == 1) ? "enabled" : "disabled");
556 /* List of controllers which cannot be hard reset on kexec with reset_devices */
557 static u32 unresettable_controller[] = {
558 0x324a103C, /* Smart Array P712m */
559 0x324b103C, /* Smart Array P711m */
560 0x3223103C, /* Smart Array P800 */
561 0x3234103C, /* Smart Array P400 */
562 0x3235103C, /* Smart Array P400i */
563 0x3211103C, /* Smart Array E200i */
564 0x3212103C, /* Smart Array E200 */
565 0x3213103C, /* Smart Array E200i */
566 0x3214103C, /* Smart Array E200i */
567 0x3215103C, /* Smart Array E200i */
568 0x3237103C, /* Smart Array E500 */
569 0x323D103C, /* Smart Array P700m */
570 0x40800E11, /* Smart Array 5i */
571 0x409C0E11, /* Smart Array 6400 */
572 0x409D0E11, /* Smart Array 6400 EM */
573 0x40700E11, /* Smart Array 5300 */
574 0x40820E11, /* Smart Array 532 */
575 0x40830E11, /* Smart Array 5312 */
576 0x409A0E11, /* Smart Array 641 */
577 0x409B0E11, /* Smart Array 642 */
578 0x40910E11, /* Smart Array 6i */
581 /* List of controllers which cannot even be soft reset */
582 static u32 soft_unresettable_controller[] = {
583 0x40800E11, /* Smart Array 5i */
584 0x40700E11, /* Smart Array 5300 */
585 0x40820E11, /* Smart Array 532 */
586 0x40830E11, /* Smart Array 5312 */
587 0x409A0E11, /* Smart Array 641 */
588 0x409B0E11, /* Smart Array 642 */
589 0x40910E11, /* Smart Array 6i */
590 /* Exclude 640x boards. These are two pci devices in one slot
591 * which share a battery backed cache module. One controls the
592 * cache, the other accesses the cache through the one that controls
593 * it. If we reset the one controlling the cache, the other will
594 * likely not be happy. Just forbid resetting this conjoined mess.
595 * The 640x isn't really supported by hpsa anyway.
597 0x409C0E11, /* Smart Array 6400 */
598 0x409D0E11, /* Smart Array 6400 EM */
601 static int board_id_in_array(u32 a[], int nelems, u32 board_id)
605 for (i = 0; i < nelems; i++)
606 if (a[i] == board_id)
611 static int ctlr_is_hard_resettable(u32 board_id)
613 return !board_id_in_array(unresettable_controller,
614 ARRAY_SIZE(unresettable_controller), board_id);
617 static int ctlr_is_soft_resettable(u32 board_id)
619 return !board_id_in_array(soft_unresettable_controller,
620 ARRAY_SIZE(soft_unresettable_controller), board_id);
623 static int ctlr_is_resettable(u32 board_id)
625 return ctlr_is_hard_resettable(board_id) ||
626 ctlr_is_soft_resettable(board_id);
629 static ssize_t host_show_resettable(struct device *dev,
630 struct device_attribute *attr, char *buf)
633 struct Scsi_Host *shost = class_to_shost(dev);
635 h = shost_to_hba(shost);
636 return snprintf(buf, 20, "%d\n", ctlr_is_resettable(h->board_id));
639 static inline int is_logical_dev_addr_mode(unsigned char scsi3addr[])
641 return (scsi3addr[3] & 0xC0) == 0x40;
644 static const char * const raid_label[] = { "0", "4", "1(+0)", "5", "5+1", "6",
645 "1(+0)ADM", "UNKNOWN", "PHYS DRV"
647 #define HPSA_RAID_0 0
648 #define HPSA_RAID_4 1
649 #define HPSA_RAID_1 2 /* also used for RAID 10 */
650 #define HPSA_RAID_5 3 /* also used for RAID 50 */
651 #define HPSA_RAID_51 4
652 #define HPSA_RAID_6 5 /* also used for RAID 60 */
653 #define HPSA_RAID_ADM 6 /* also used for RAID 1+0 ADM */
654 #define RAID_UNKNOWN (ARRAY_SIZE(raid_label) - 2)
655 #define PHYSICAL_DRIVE (ARRAY_SIZE(raid_label) - 1)
657 static inline bool is_logical_device(struct hpsa_scsi_dev_t *device)
659 return !device->physical_device;
662 static ssize_t raid_level_show(struct device *dev,
663 struct device_attribute *attr, char *buf)
666 unsigned char rlevel;
668 struct scsi_device *sdev;
669 struct hpsa_scsi_dev_t *hdev;
672 sdev = to_scsi_device(dev);
673 h = sdev_to_hba(sdev);
674 spin_lock_irqsave(&h->lock, flags);
675 hdev = sdev->hostdata;
677 spin_unlock_irqrestore(&h->lock, flags);
681 /* Is this even a logical drive? */
682 if (!is_logical_device(hdev)) {
683 spin_unlock_irqrestore(&h->lock, flags);
684 l = snprintf(buf, PAGE_SIZE, "N/A\n");
688 rlevel = hdev->raid_level;
689 spin_unlock_irqrestore(&h->lock, flags);
690 if (rlevel > RAID_UNKNOWN)
691 rlevel = RAID_UNKNOWN;
692 l = snprintf(buf, PAGE_SIZE, "RAID %s\n", raid_label[rlevel]);
696 static ssize_t lunid_show(struct device *dev,
697 struct device_attribute *attr, char *buf)
700 struct scsi_device *sdev;
701 struct hpsa_scsi_dev_t *hdev;
703 unsigned char lunid[8];
705 sdev = to_scsi_device(dev);
706 h = sdev_to_hba(sdev);
707 spin_lock_irqsave(&h->lock, flags);
708 hdev = sdev->hostdata;
710 spin_unlock_irqrestore(&h->lock, flags);
713 memcpy(lunid, hdev->scsi3addr, sizeof(lunid));
714 spin_unlock_irqrestore(&h->lock, flags);
715 return snprintf(buf, 20, "0x%8phN\n", lunid);
718 static ssize_t unique_id_show(struct device *dev,
719 struct device_attribute *attr, char *buf)
722 struct scsi_device *sdev;
723 struct hpsa_scsi_dev_t *hdev;
725 unsigned char sn[16];
727 sdev = to_scsi_device(dev);
728 h = sdev_to_hba(sdev);
729 spin_lock_irqsave(&h->lock, flags);
730 hdev = sdev->hostdata;
732 spin_unlock_irqrestore(&h->lock, flags);
735 memcpy(sn, hdev->device_id, sizeof(sn));
736 spin_unlock_irqrestore(&h->lock, flags);
737 return snprintf(buf, 16 * 2 + 2,
738 "%02X%02X%02X%02X%02X%02X%02X%02X"
739 "%02X%02X%02X%02X%02X%02X%02X%02X\n",
740 sn[0], sn[1], sn[2], sn[3],
741 sn[4], sn[5], sn[6], sn[7],
742 sn[8], sn[9], sn[10], sn[11],
743 sn[12], sn[13], sn[14], sn[15]);
746 static ssize_t sas_address_show(struct device *dev,
747 struct device_attribute *attr, char *buf)
750 struct scsi_device *sdev;
751 struct hpsa_scsi_dev_t *hdev;
755 sdev = to_scsi_device(dev);
756 h = sdev_to_hba(sdev);
757 spin_lock_irqsave(&h->lock, flags);
758 hdev = sdev->hostdata;
759 if (!hdev || is_logical_device(hdev) || !hdev->expose_device) {
760 spin_unlock_irqrestore(&h->lock, flags);
763 sas_address = hdev->sas_address;
764 spin_unlock_irqrestore(&h->lock, flags);
766 return snprintf(buf, PAGE_SIZE, "0x%016llx\n", sas_address);
769 static ssize_t host_show_hp_ssd_smart_path_enabled(struct device *dev,
770 struct device_attribute *attr, char *buf)
773 struct scsi_device *sdev;
774 struct hpsa_scsi_dev_t *hdev;
778 sdev = to_scsi_device(dev);
779 h = sdev_to_hba(sdev);
780 spin_lock_irqsave(&h->lock, flags);
781 hdev = sdev->hostdata;
783 spin_unlock_irqrestore(&h->lock, flags);
786 offload_enabled = hdev->offload_enabled;
787 spin_unlock_irqrestore(&h->lock, flags);
789 if (hdev->devtype == TYPE_DISK || hdev->devtype == TYPE_ZBC)
790 return snprintf(buf, 20, "%d\n", offload_enabled);
792 return snprintf(buf, 40, "%s\n",
793 "Not applicable for a controller");
797 static ssize_t path_info_show(struct device *dev,
798 struct device_attribute *attr, char *buf)
801 struct scsi_device *sdev;
802 struct hpsa_scsi_dev_t *hdev;
808 u8 path_map_index = 0;
810 unsigned char phys_connector[2];
812 sdev = to_scsi_device(dev);
813 h = sdev_to_hba(sdev);
814 spin_lock_irqsave(&h->devlock, flags);
815 hdev = sdev->hostdata;
817 spin_unlock_irqrestore(&h->devlock, flags);
822 for (i = 0; i < MAX_PATHS; i++) {
823 path_map_index = 1<<i;
824 if (i == hdev->active_path_index)
826 else if (hdev->path_map & path_map_index)
831 output_len += scnprintf(buf + output_len,
832 PAGE_SIZE - output_len,
833 "[%d:%d:%d:%d] %20.20s ",
834 h->scsi_host->host_no,
835 hdev->bus, hdev->target, hdev->lun,
836 scsi_device_type(hdev->devtype));
838 if (hdev->devtype == TYPE_RAID || is_logical_device(hdev)) {
839 output_len += scnprintf(buf + output_len,
840 PAGE_SIZE - output_len,
846 memcpy(&phys_connector, &hdev->phys_connector[i],
847 sizeof(phys_connector));
848 if (phys_connector[0] < '0')
849 phys_connector[0] = '0';
850 if (phys_connector[1] < '0')
851 phys_connector[1] = '0';
852 output_len += scnprintf(buf + output_len,
853 PAGE_SIZE - output_len,
856 if ((hdev->devtype == TYPE_DISK || hdev->devtype == TYPE_ZBC) &&
857 hdev->expose_device) {
858 if (box == 0 || box == 0xFF) {
859 output_len += scnprintf(buf + output_len,
860 PAGE_SIZE - output_len,
864 output_len += scnprintf(buf + output_len,
865 PAGE_SIZE - output_len,
866 "BOX: %hhu BAY: %hhu %s\n",
869 } else if (box != 0 && box != 0xFF) {
870 output_len += scnprintf(buf + output_len,
871 PAGE_SIZE - output_len, "BOX: %hhu %s\n",
874 output_len += scnprintf(buf + output_len,
875 PAGE_SIZE - output_len, "%s\n", active);
878 spin_unlock_irqrestore(&h->devlock, flags);
882 static ssize_t host_show_ctlr_num(struct device *dev,
883 struct device_attribute *attr, char *buf)
886 struct Scsi_Host *shost = class_to_shost(dev);
888 h = shost_to_hba(shost);
889 return snprintf(buf, 20, "%d\n", h->ctlr);
892 static ssize_t host_show_legacy_board(struct device *dev,
893 struct device_attribute *attr, char *buf)
896 struct Scsi_Host *shost = class_to_shost(dev);
898 h = shost_to_hba(shost);
899 return snprintf(buf, 20, "%d\n", h->legacy_board ? 1 : 0);
902 static DEVICE_ATTR_RO(raid_level);
903 static DEVICE_ATTR_RO(lunid);
904 static DEVICE_ATTR_RO(unique_id);
905 static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan);
906 static DEVICE_ATTR_RO(sas_address);
907 static DEVICE_ATTR(hp_ssd_smart_path_enabled, S_IRUGO,
908 host_show_hp_ssd_smart_path_enabled, NULL);
909 static DEVICE_ATTR_RO(path_info);
910 static DEVICE_ATTR(hp_ssd_smart_path_status, S_IWUSR|S_IRUGO|S_IROTH,
911 host_show_hp_ssd_smart_path_status,
912 host_store_hp_ssd_smart_path_status);
913 static DEVICE_ATTR(raid_offload_debug, S_IWUSR, NULL,
914 host_store_raid_offload_debug);
915 static DEVICE_ATTR(firmware_revision, S_IRUGO,
916 host_show_firmware_revision, NULL);
917 static DEVICE_ATTR(commands_outstanding, S_IRUGO,
918 host_show_commands_outstanding, NULL);
919 static DEVICE_ATTR(transport_mode, S_IRUGO,
920 host_show_transport_mode, NULL);
921 static DEVICE_ATTR(resettable, S_IRUGO,
922 host_show_resettable, NULL);
923 static DEVICE_ATTR(lockup_detected, S_IRUGO,
924 host_show_lockup_detected, NULL);
925 static DEVICE_ATTR(ctlr_num, S_IRUGO,
926 host_show_ctlr_num, NULL);
927 static DEVICE_ATTR(legacy_board, S_IRUGO,
928 host_show_legacy_board, NULL);
930 static struct device_attribute *hpsa_sdev_attrs[] = {
931 &dev_attr_raid_level,
934 &dev_attr_hp_ssd_smart_path_enabled,
936 &dev_attr_sas_address,
940 static struct device_attribute *hpsa_shost_attrs[] = {
942 &dev_attr_firmware_revision,
943 &dev_attr_commands_outstanding,
944 &dev_attr_transport_mode,
945 &dev_attr_resettable,
946 &dev_attr_hp_ssd_smart_path_status,
947 &dev_attr_raid_offload_debug,
948 &dev_attr_lockup_detected,
950 &dev_attr_legacy_board,
954 #define HPSA_NRESERVED_CMDS (HPSA_CMDS_RESERVED_FOR_DRIVER +\
955 HPSA_MAX_CONCURRENT_PASSTHRUS)
957 static struct scsi_host_template hpsa_driver_template = {
958 .module = THIS_MODULE,
961 .queuecommand = hpsa_scsi_queue_command,
962 .scan_start = hpsa_scan_start,
963 .scan_finished = hpsa_scan_finished,
964 .change_queue_depth = hpsa_change_queue_depth,
966 .eh_device_reset_handler = hpsa_eh_device_reset_handler,
968 .slave_alloc = hpsa_slave_alloc,
969 .slave_configure = hpsa_slave_configure,
970 .slave_destroy = hpsa_slave_destroy,
972 .compat_ioctl = hpsa_compat_ioctl,
974 .sdev_attrs = hpsa_sdev_attrs,
975 .shost_attrs = hpsa_shost_attrs,
980 static inline u32 next_command(struct ctlr_info *h, u8 q)
983 struct reply_queue_buffer *rq = &h->reply_queue[q];
985 if (h->transMethod & CFGTBL_Trans_io_accel1)
986 return h->access.command_completed(h, q);
988 if (unlikely(!(h->transMethod & CFGTBL_Trans_Performant)))
989 return h->access.command_completed(h, q);
991 if ((rq->head[rq->current_entry] & 1) == rq->wraparound) {
992 a = rq->head[rq->current_entry];
994 atomic_dec(&h->commands_outstanding);
998 /* Check for wraparound */
999 if (rq->current_entry == h->max_commands) {
1000 rq->current_entry = 0;
1001 rq->wraparound ^= 1;
1007 * There are some special bits in the bus address of the
1008 * command that we have to set for the controller to know
1009 * how to process the command:
1011 * Normal performant mode:
1012 * bit 0: 1 means performant mode, 0 means simple mode.
1013 * bits 1-3 = block fetch table entry
1014 * bits 4-6 = command type (== 0)
1017 * bit 0 = "performant mode" bit.
1018 * bits 1-3 = block fetch table entry
1019 * bits 4-6 = command type (== 110)
1020 * (command type is needed because ioaccel1 mode
1021 * commands are submitted through the same register as normal
1022 * mode commands, so this is how the controller knows whether
1023 * the command is normal mode or ioaccel1 mode.)
1026 * bit 0 = "performant mode" bit.
1027 * bits 1-4 = block fetch table entry (note extra bit)
1028 * bits 4-6 = not needed, because ioaccel2 mode has
1029 * a separate special register for submitting commands.
1033 * set_performant_mode: Modify the tag for cciss performant
1034 * set bit 0 for pull model, bits 3-1 for block fetch
1037 #define DEFAULT_REPLY_QUEUE (-1)
1038 static void set_performant_mode(struct ctlr_info *h, struct CommandList *c,
1041 if (likely(h->transMethod & CFGTBL_Trans_Performant)) {
1042 c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1);
1043 if (unlikely(!h->msix_vectors))
1045 c->Header.ReplyQueue = reply_queue;
1049 static void set_ioaccel1_performant_mode(struct ctlr_info *h,
1050 struct CommandList *c,
1053 struct io_accel1_cmd *cp = &h->ioaccel_cmd_pool[c->cmdindex];
1056 * Tell the controller to post the reply to the queue for this
1057 * processor. This seems to give the best I/O throughput.
1059 cp->ReplyQueue = reply_queue;
1061 * Set the bits in the address sent down to include:
1062 * - performant mode bit (bit 0)
1063 * - pull count (bits 1-3)
1064 * - command type (bits 4-6)
1066 c->busaddr |= 1 | (h->ioaccel1_blockFetchTable[c->Header.SGList] << 1) |
1067 IOACCEL1_BUSADDR_CMDTYPE;
1070 static void set_ioaccel2_tmf_performant_mode(struct ctlr_info *h,
1071 struct CommandList *c,
1074 struct hpsa_tmf_struct *cp = (struct hpsa_tmf_struct *)
1075 &h->ioaccel2_cmd_pool[c->cmdindex];
1077 /* Tell the controller to post the reply to the queue for this
1078 * processor. This seems to give the best I/O throughput.
1080 cp->reply_queue = reply_queue;
1081 /* Set the bits in the address sent down to include:
1082 * - performant mode bit not used in ioaccel mode 2
1083 * - pull count (bits 0-3)
1084 * - command type isn't needed for ioaccel2
1086 c->busaddr |= h->ioaccel2_blockFetchTable[0];
1089 static void set_ioaccel2_performant_mode(struct ctlr_info *h,
1090 struct CommandList *c,
1093 struct io_accel2_cmd *cp = &h->ioaccel2_cmd_pool[c->cmdindex];
1096 * Tell the controller to post the reply to the queue for this
1097 * processor. This seems to give the best I/O throughput.
1099 cp->reply_queue = reply_queue;
1101 * Set the bits in the address sent down to include:
1102 * - performant mode bit not used in ioaccel mode 2
1103 * - pull count (bits 0-3)
1104 * - command type isn't needed for ioaccel2
1106 c->busaddr |= (h->ioaccel2_blockFetchTable[cp->sg_count]);
1109 static int is_firmware_flash_cmd(u8 *cdb)
1111 return cdb[0] == BMIC_WRITE && cdb[6] == BMIC_FLASH_FIRMWARE;
1115 * During firmware flash, the heartbeat register may not update as frequently
1116 * as it should. So we dial down lockup detection during firmware flash. and
1117 * dial it back up when firmware flash completes.
1119 #define HEARTBEAT_SAMPLE_INTERVAL_DURING_FLASH (240 * HZ)
1120 #define HEARTBEAT_SAMPLE_INTERVAL (30 * HZ)
1121 #define HPSA_EVENT_MONITOR_INTERVAL (15 * HZ)
1122 static void dial_down_lockup_detection_during_fw_flash(struct ctlr_info *h,
1123 struct CommandList *c)
1125 if (!is_firmware_flash_cmd(c->Request.CDB))
1127 atomic_inc(&h->firmware_flash_in_progress);
1128 h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL_DURING_FLASH;
1131 static void dial_up_lockup_detection_on_fw_flash_complete(struct ctlr_info *h,
1132 struct CommandList *c)
1134 if (is_firmware_flash_cmd(c->Request.CDB) &&
1135 atomic_dec_and_test(&h->firmware_flash_in_progress))
1136 h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL;
1139 static void __enqueue_cmd_and_start_io(struct ctlr_info *h,
1140 struct CommandList *c, int reply_queue)
1142 dial_down_lockup_detection_during_fw_flash(h, c);
1143 atomic_inc(&h->commands_outstanding);
1145 atomic_inc(&c->device->commands_outstanding);
1147 reply_queue = h->reply_map[raw_smp_processor_id()];
1148 switch (c->cmd_type) {
1150 set_ioaccel1_performant_mode(h, c, reply_queue);
1151 writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
1154 set_ioaccel2_performant_mode(h, c, reply_queue);
1155 writel(c->busaddr, h->vaddr + IOACCEL2_INBOUND_POSTQ_32);
1158 set_ioaccel2_tmf_performant_mode(h, c, reply_queue);
1159 writel(c->busaddr, h->vaddr + IOACCEL2_INBOUND_POSTQ_32);
1162 set_performant_mode(h, c, reply_queue);
1163 h->access.submit_command(h, c);
1167 static void enqueue_cmd_and_start_io(struct ctlr_info *h, struct CommandList *c)
1169 __enqueue_cmd_and_start_io(h, c, DEFAULT_REPLY_QUEUE);
1172 static inline int is_hba_lunid(unsigned char scsi3addr[])
1174 return memcmp(scsi3addr, RAID_CTLR_LUNID, 8) == 0;
1177 static inline int is_scsi_rev_5(struct ctlr_info *h)
1179 if (!h->hba_inquiry_data)
1181 if ((h->hba_inquiry_data[2] & 0x07) == 5)
1186 static int hpsa_find_target_lun(struct ctlr_info *h,
1187 unsigned char scsi3addr[], int bus, int *target, int *lun)
1189 /* finds an unused bus, target, lun for a new physical device
1190 * assumes h->devlock is held
1193 DECLARE_BITMAP(lun_taken, HPSA_MAX_DEVICES);
1195 bitmap_zero(lun_taken, HPSA_MAX_DEVICES);
1197 for (i = 0; i < h->ndevices; i++) {
1198 if (h->dev[i]->bus == bus && h->dev[i]->target != -1)
1199 __set_bit(h->dev[i]->target, lun_taken);
1202 i = find_first_zero_bit(lun_taken, HPSA_MAX_DEVICES);
1203 if (i < HPSA_MAX_DEVICES) {
1212 static void hpsa_show_dev_msg(const char *level, struct ctlr_info *h,
1213 struct hpsa_scsi_dev_t *dev, char *description)
1215 #define LABEL_SIZE 25
1216 char label[LABEL_SIZE];
1218 if (h == NULL || h->pdev == NULL || h->scsi_host == NULL)
1221 switch (dev->devtype) {
1223 snprintf(label, LABEL_SIZE, "controller");
1225 case TYPE_ENCLOSURE:
1226 snprintf(label, LABEL_SIZE, "enclosure");
1231 snprintf(label, LABEL_SIZE, "external");
1232 else if (!is_logical_dev_addr_mode(dev->scsi3addr))
1233 snprintf(label, LABEL_SIZE, "%s",
1234 raid_label[PHYSICAL_DRIVE]);
1236 snprintf(label, LABEL_SIZE, "RAID-%s",
1237 dev->raid_level > RAID_UNKNOWN ? "?" :
1238 raid_label[dev->raid_level]);
1241 snprintf(label, LABEL_SIZE, "rom");
1244 snprintf(label, LABEL_SIZE, "tape");
1246 case TYPE_MEDIUM_CHANGER:
1247 snprintf(label, LABEL_SIZE, "changer");
1250 snprintf(label, LABEL_SIZE, "UNKNOWN");
1254 dev_printk(level, &h->pdev->dev,
1255 "scsi %d:%d:%d:%d: %s %s %.8s %.16s %s SSDSmartPathCap%c En%c Exp=%d\n",
1256 h->scsi_host->host_no, dev->bus, dev->target, dev->lun,
1258 scsi_device_type(dev->devtype),
1262 dev->offload_config ? '+' : '-',
1263 dev->offload_to_be_enabled ? '+' : '-',
1264 dev->expose_device);
1267 /* Add an entry into h->dev[] array. */
1268 static int hpsa_scsi_add_entry(struct ctlr_info *h,
1269 struct hpsa_scsi_dev_t *device,
1270 struct hpsa_scsi_dev_t *added[], int *nadded)
1272 /* assumes h->devlock is held */
1273 int n = h->ndevices;
1275 unsigned char addr1[8], addr2[8];
1276 struct hpsa_scsi_dev_t *sd;
1278 if (n >= HPSA_MAX_DEVICES) {
1279 dev_err(&h->pdev->dev, "too many devices, some will be "
1284 /* physical devices do not have lun or target assigned until now. */
1285 if (device->lun != -1)
1286 /* Logical device, lun is already assigned. */
1289 /* If this device a non-zero lun of a multi-lun device
1290 * byte 4 of the 8-byte LUN addr will contain the logical
1291 * unit no, zero otherwise.
1293 if (device->scsi3addr[4] == 0) {
1294 /* This is not a non-zero lun of a multi-lun device */
1295 if (hpsa_find_target_lun(h, device->scsi3addr,
1296 device->bus, &device->target, &device->lun) != 0)
1301 /* This is a non-zero lun of a multi-lun device.
1302 * Search through our list and find the device which
1303 * has the same 8 byte LUN address, excepting byte 4 and 5.
1304 * Assign the same bus and target for this new LUN.
1305 * Use the logical unit number from the firmware.
1307 memcpy(addr1, device->scsi3addr, 8);
1310 for (i = 0; i < n; i++) {
1312 memcpy(addr2, sd->scsi3addr, 8);
1315 /* differ only in byte 4 and 5? */
1316 if (memcmp(addr1, addr2, 8) == 0) {
1317 device->bus = sd->bus;
1318 device->target = sd->target;
1319 device->lun = device->scsi3addr[4];
1323 if (device->lun == -1) {
1324 dev_warn(&h->pdev->dev, "physical device with no LUN=0,"
1325 " suspect firmware bug or unsupported hardware "
1326 "configuration.\n");
1334 added[*nadded] = device;
1336 hpsa_show_dev_msg(KERN_INFO, h, device,
1337 device->expose_device ? "added" : "masked");
1342 * Called during a scan operation.
1344 * Update an entry in h->dev[] array.
1346 static void hpsa_scsi_update_entry(struct ctlr_info *h,
1347 int entry, struct hpsa_scsi_dev_t *new_entry)
1349 /* assumes h->devlock is held */
1350 BUG_ON(entry < 0 || entry >= HPSA_MAX_DEVICES);
1352 /* Raid level changed. */
1353 h->dev[entry]->raid_level = new_entry->raid_level;
1356 * ioacccel_handle may have changed for a dual domain disk
1358 h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle;
1360 /* Raid offload parameters changed. Careful about the ordering. */
1361 if (new_entry->offload_config && new_entry->offload_to_be_enabled) {
1363 * if drive is newly offload_enabled, we want to copy the
1364 * raid map data first. If previously offload_enabled and
1365 * offload_config were set, raid map data had better be
1366 * the same as it was before. If raid map data has changed
1367 * then it had better be the case that
1368 * h->dev[entry]->offload_enabled is currently 0.
1370 h->dev[entry]->raid_map = new_entry->raid_map;
1371 h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle;
1373 if (new_entry->offload_to_be_enabled) {
1374 h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle;
1375 wmb(); /* set ioaccel_handle *before* hba_ioaccel_enabled */
1377 h->dev[entry]->hba_ioaccel_enabled = new_entry->hba_ioaccel_enabled;
1378 h->dev[entry]->offload_config = new_entry->offload_config;
1379 h->dev[entry]->offload_to_mirror = new_entry->offload_to_mirror;
1380 h->dev[entry]->queue_depth = new_entry->queue_depth;
1383 * We can turn off ioaccel offload now, but need to delay turning
1384 * ioaccel on until we can update h->dev[entry]->phys_disk[], but we
1385 * can't do that until all the devices are updated.
1387 h->dev[entry]->offload_to_be_enabled = new_entry->offload_to_be_enabled;
1390 * turn ioaccel off immediately if told to do so.
1392 if (!new_entry->offload_to_be_enabled)
1393 h->dev[entry]->offload_enabled = 0;
1395 hpsa_show_dev_msg(KERN_INFO, h, h->dev[entry], "updated");
1398 /* Replace an entry from h->dev[] array. */
1399 static void hpsa_scsi_replace_entry(struct ctlr_info *h,
1400 int entry, struct hpsa_scsi_dev_t *new_entry,
1401 struct hpsa_scsi_dev_t *added[], int *nadded,
1402 struct hpsa_scsi_dev_t *removed[], int *nremoved)
1404 /* assumes h->devlock is held */
1405 BUG_ON(entry < 0 || entry >= HPSA_MAX_DEVICES);
1406 removed[*nremoved] = h->dev[entry];
1410 * New physical devices won't have target/lun assigned yet
1411 * so we need to preserve the values in the slot we are replacing.
1413 if (new_entry->target == -1) {
1414 new_entry->target = h->dev[entry]->target;
1415 new_entry->lun = h->dev[entry]->lun;
1418 h->dev[entry] = new_entry;
1419 added[*nadded] = new_entry;
1422 hpsa_show_dev_msg(KERN_INFO, h, new_entry, "replaced");
1425 /* Remove an entry from h->dev[] array. */
1426 static void hpsa_scsi_remove_entry(struct ctlr_info *h, int entry,
1427 struct hpsa_scsi_dev_t *removed[], int *nremoved)
1429 /* assumes h->devlock is held */
1431 struct hpsa_scsi_dev_t *sd;
1433 BUG_ON(entry < 0 || entry >= HPSA_MAX_DEVICES);
1436 removed[*nremoved] = h->dev[entry];
1439 for (i = entry; i < h->ndevices-1; i++)
1440 h->dev[i] = h->dev[i+1];
1442 hpsa_show_dev_msg(KERN_INFO, h, sd, "removed");
1445 #define SCSI3ADDR_EQ(a, b) ( \
1446 (a)[7] == (b)[7] && \
1447 (a)[6] == (b)[6] && \
1448 (a)[5] == (b)[5] && \
1449 (a)[4] == (b)[4] && \
1450 (a)[3] == (b)[3] && \
1451 (a)[2] == (b)[2] && \
1452 (a)[1] == (b)[1] && \
1455 static void fixup_botched_add(struct ctlr_info *h,
1456 struct hpsa_scsi_dev_t *added)
1458 /* called when scsi_add_device fails in order to re-adjust
1459 * h->dev[] to match the mid layer's view.
1461 unsigned long flags;
1464 spin_lock_irqsave(&h->lock, flags);
1465 for (i = 0; i < h->ndevices; i++) {
1466 if (h->dev[i] == added) {
1467 for (j = i; j < h->ndevices-1; j++)
1468 h->dev[j] = h->dev[j+1];
1473 spin_unlock_irqrestore(&h->lock, flags);
1477 static inline int device_is_the_same(struct hpsa_scsi_dev_t *dev1,
1478 struct hpsa_scsi_dev_t *dev2)
1480 /* we compare everything except lun and target as these
1481 * are not yet assigned. Compare parts likely
1484 if (memcmp(dev1->scsi3addr, dev2->scsi3addr,
1485 sizeof(dev1->scsi3addr)) != 0)
1487 if (memcmp(dev1->device_id, dev2->device_id,
1488 sizeof(dev1->device_id)) != 0)
1490 if (memcmp(dev1->model, dev2->model, sizeof(dev1->model)) != 0)
1492 if (memcmp(dev1->vendor, dev2->vendor, sizeof(dev1->vendor)) != 0)
1494 if (dev1->devtype != dev2->devtype)
1496 if (dev1->bus != dev2->bus)
1501 static inline int device_updated(struct hpsa_scsi_dev_t *dev1,
1502 struct hpsa_scsi_dev_t *dev2)
1504 /* Device attributes that can change, but don't mean
1505 * that the device is a different device, nor that the OS
1506 * needs to be told anything about the change.
1508 if (dev1->raid_level != dev2->raid_level)
1510 if (dev1->offload_config != dev2->offload_config)
1512 if (dev1->offload_to_be_enabled != dev2->offload_to_be_enabled)
1514 if (!is_logical_dev_addr_mode(dev1->scsi3addr))
1515 if (dev1->queue_depth != dev2->queue_depth)
1518 * This can happen for dual domain devices. An active
1519 * path change causes the ioaccel handle to change
1521 * for example note the handle differences between p0 and p1
1522 * Device WWN ,WWN hash,Handle
1523 * D016 p0|0x3 [02]P2E:01:01,0x5000C5005FC4DACA,0x9B5616,0x01030003
1524 * p1 0x5000C5005FC4DAC9,0x6798C0,0x00040004
1526 if (dev1->ioaccel_handle != dev2->ioaccel_handle)
1531 /* Find needle in haystack. If exact match found, return DEVICE_SAME,
1532 * and return needle location in *index. If scsi3addr matches, but not
1533 * vendor, model, serial num, etc. return DEVICE_CHANGED, and return needle
1534 * location in *index.
1535 * In the case of a minor device attribute change, such as RAID level, just
1536 * return DEVICE_UPDATED, along with the updated device's location in index.
1537 * If needle not found, return DEVICE_NOT_FOUND.
1539 static int hpsa_scsi_find_entry(struct hpsa_scsi_dev_t *needle,
1540 struct hpsa_scsi_dev_t *haystack[], int haystack_size,
1544 #define DEVICE_NOT_FOUND 0
1545 #define DEVICE_CHANGED 1
1546 #define DEVICE_SAME 2
1547 #define DEVICE_UPDATED 3
1549 return DEVICE_NOT_FOUND;
1551 for (i = 0; i < haystack_size; i++) {
1552 if (haystack[i] == NULL) /* previously removed. */
1554 if (SCSI3ADDR_EQ(needle->scsi3addr, haystack[i]->scsi3addr)) {
1556 if (device_is_the_same(needle, haystack[i])) {
1557 if (device_updated(needle, haystack[i]))
1558 return DEVICE_UPDATED;
1561 /* Keep offline devices offline */
1562 if (needle->volume_offline)
1563 return DEVICE_NOT_FOUND;
1564 return DEVICE_CHANGED;
1569 return DEVICE_NOT_FOUND;
1572 static void hpsa_monitor_offline_device(struct ctlr_info *h,
1573 unsigned char scsi3addr[])
1575 struct offline_device_entry *device;
1576 unsigned long flags;
1578 /* Check to see if device is already on the list */
1579 spin_lock_irqsave(&h->offline_device_lock, flags);
1580 list_for_each_entry(device, &h->offline_device_list, offline_list) {
1581 if (memcmp(device->scsi3addr, scsi3addr,
1582 sizeof(device->scsi3addr)) == 0) {
1583 spin_unlock_irqrestore(&h->offline_device_lock, flags);
1587 spin_unlock_irqrestore(&h->offline_device_lock, flags);
1589 /* Device is not on the list, add it. */
1590 device = kmalloc(sizeof(*device), GFP_KERNEL);
1594 memcpy(device->scsi3addr, scsi3addr, sizeof(device->scsi3addr));
1595 spin_lock_irqsave(&h->offline_device_lock, flags);
1596 list_add_tail(&device->offline_list, &h->offline_device_list);
1597 spin_unlock_irqrestore(&h->offline_device_lock, flags);
1600 /* Print a message explaining various offline volume states */
1601 static void hpsa_show_volume_status(struct ctlr_info *h,
1602 struct hpsa_scsi_dev_t *sd)
1604 if (sd->volume_offline == HPSA_VPD_LV_STATUS_UNSUPPORTED)
1605 dev_info(&h->pdev->dev,
1606 "C%d:B%d:T%d:L%d Volume status is not available through vital product data pages.\n",
1607 h->scsi_host->host_no,
1608 sd->bus, sd->target, sd->lun);
1609 switch (sd->volume_offline) {
1612 case HPSA_LV_UNDERGOING_ERASE:
1613 dev_info(&h->pdev->dev,
1614 "C%d:B%d:T%d:L%d Volume is undergoing background erase process.\n",
1615 h->scsi_host->host_no,
1616 sd->bus, sd->target, sd->lun);
1618 case HPSA_LV_NOT_AVAILABLE:
1619 dev_info(&h->pdev->dev,
1620 "C%d:B%d:T%d:L%d Volume is waiting for transforming volume.\n",
1621 h->scsi_host->host_no,
1622 sd->bus, sd->target, sd->lun);
1624 case HPSA_LV_UNDERGOING_RPI:
1625 dev_info(&h->pdev->dev,
1626 "C%d:B%d:T%d:L%d Volume is undergoing rapid parity init.\n",
1627 h->scsi_host->host_no,
1628 sd->bus, sd->target, sd->lun);
1630 case HPSA_LV_PENDING_RPI:
1631 dev_info(&h->pdev->dev,
1632 "C%d:B%d:T%d:L%d Volume is queued for rapid parity initialization process.\n",
1633 h->scsi_host->host_no,
1634 sd->bus, sd->target, sd->lun);
1636 case HPSA_LV_ENCRYPTED_NO_KEY:
1637 dev_info(&h->pdev->dev,
1638 "C%d:B%d:T%d:L%d Volume is encrypted and cannot be accessed because key is not present.\n",
1639 h->scsi_host->host_no,
1640 sd->bus, sd->target, sd->lun);
1642 case HPSA_LV_PLAINTEXT_IN_ENCRYPT_ONLY_CONTROLLER:
1643 dev_info(&h->pdev->dev,
1644 "C%d:B%d:T%d:L%d Volume is not encrypted and cannot be accessed because controller is in encryption-only mode.\n",
1645 h->scsi_host->host_no,
1646 sd->bus, sd->target, sd->lun);
1648 case HPSA_LV_UNDERGOING_ENCRYPTION:
1649 dev_info(&h->pdev->dev,
1650 "C%d:B%d:T%d:L%d Volume is undergoing encryption process.\n",
1651 h->scsi_host->host_no,
1652 sd->bus, sd->target, sd->lun);
1654 case HPSA_LV_UNDERGOING_ENCRYPTION_REKEYING:
1655 dev_info(&h->pdev->dev,
1656 "C%d:B%d:T%d:L%d Volume is undergoing encryption re-keying process.\n",
1657 h->scsi_host->host_no,
1658 sd->bus, sd->target, sd->lun);
1660 case HPSA_LV_ENCRYPTED_IN_NON_ENCRYPTED_CONTROLLER:
1661 dev_info(&h->pdev->dev,
1662 "C%d:B%d:T%d:L%d Volume is encrypted and cannot be accessed because controller does not have encryption enabled.\n",
1663 h->scsi_host->host_no,
1664 sd->bus, sd->target, sd->lun);
1666 case HPSA_LV_PENDING_ENCRYPTION:
1667 dev_info(&h->pdev->dev,
1668 "C%d:B%d:T%d:L%d Volume is pending migration to encrypted state, but process has not started.\n",
1669 h->scsi_host->host_no,
1670 sd->bus, sd->target, sd->lun);
1672 case HPSA_LV_PENDING_ENCRYPTION_REKEYING:
1673 dev_info(&h->pdev->dev,
1674 "C%d:B%d:T%d:L%d Volume is encrypted and is pending encryption rekeying.\n",
1675 h->scsi_host->host_no,
1676 sd->bus, sd->target, sd->lun);
1682 * Figure the list of physical drive pointers for a logical drive with
1683 * raid offload configured.
1685 static void hpsa_figure_phys_disk_ptrs(struct ctlr_info *h,
1686 struct hpsa_scsi_dev_t *dev[], int ndevices,
1687 struct hpsa_scsi_dev_t *logical_drive)
1689 struct raid_map_data *map = &logical_drive->raid_map;
1690 struct raid_map_disk_data *dd = &map->data[0];
1692 int total_disks_per_row = le16_to_cpu(map->data_disks_per_row) +
1693 le16_to_cpu(map->metadata_disks_per_row);
1694 int nraid_map_entries = le16_to_cpu(map->row_cnt) *
1695 le16_to_cpu(map->layout_map_count) *
1696 total_disks_per_row;
1697 int nphys_disk = le16_to_cpu(map->layout_map_count) *
1698 total_disks_per_row;
1701 if (nraid_map_entries > RAID_MAP_MAX_ENTRIES)
1702 nraid_map_entries = RAID_MAP_MAX_ENTRIES;
1704 logical_drive->nphysical_disks = nraid_map_entries;
1707 for (i = 0; i < nraid_map_entries; i++) {
1708 logical_drive->phys_disk[i] = NULL;
1709 if (!logical_drive->offload_config)
1711 for (j = 0; j < ndevices; j++) {
1714 if (dev[j]->devtype != TYPE_DISK &&
1715 dev[j]->devtype != TYPE_ZBC)
1717 if (is_logical_device(dev[j]))
1719 if (dev[j]->ioaccel_handle != dd[i].ioaccel_handle)
1722 logical_drive->phys_disk[i] = dev[j];
1724 qdepth = min(h->nr_cmds, qdepth +
1725 logical_drive->phys_disk[i]->queue_depth);
1730 * This can happen if a physical drive is removed and
1731 * the logical drive is degraded. In that case, the RAID
1732 * map data will refer to a physical disk which isn't actually
1733 * present. And in that case offload_enabled should already
1734 * be 0, but we'll turn it off here just in case
1736 if (!logical_drive->phys_disk[i]) {
1737 dev_warn(&h->pdev->dev,
1738 "%s: [%d:%d:%d:%d] A phys disk component of LV is missing, turning off offload_enabled for LV.\n",
1740 h->scsi_host->host_no, logical_drive->bus,
1741 logical_drive->target, logical_drive->lun);
1742 logical_drive->offload_enabled = 0;
1743 logical_drive->offload_to_be_enabled = 0;
1744 logical_drive->queue_depth = 8;
1747 if (nraid_map_entries)
1749 * This is correct for reads, too high for full stripe writes,
1750 * way too high for partial stripe writes
1752 logical_drive->queue_depth = qdepth;
1754 if (logical_drive->external)
1755 logical_drive->queue_depth = EXTERNAL_QD;
1757 logical_drive->queue_depth = h->nr_cmds;
1761 static void hpsa_update_log_drive_phys_drive_ptrs(struct ctlr_info *h,
1762 struct hpsa_scsi_dev_t *dev[], int ndevices)
1766 for (i = 0; i < ndevices; i++) {
1769 if (dev[i]->devtype != TYPE_DISK &&
1770 dev[i]->devtype != TYPE_ZBC)
1772 if (!is_logical_device(dev[i]))
1776 * If offload is currently enabled, the RAID map and
1777 * phys_disk[] assignment *better* not be changing
1778 * because we would be changing ioaccel phsy_disk[] pointers
1779 * on a ioaccel volume processing I/O requests.
1781 * If an ioaccel volume status changed, initially because it was
1782 * re-configured and thus underwent a transformation, or
1783 * a drive failed, we would have received a state change
1784 * request and ioaccel should have been turned off. When the
1785 * transformation completes, we get another state change
1786 * request to turn ioaccel back on. In this case, we need
1787 * to update the ioaccel information.
1789 * Thus: If it is not currently enabled, but will be after
1790 * the scan completes, make sure the ioaccel pointers
1794 if (!dev[i]->offload_enabled && dev[i]->offload_to_be_enabled)
1795 hpsa_figure_phys_disk_ptrs(h, dev, ndevices, dev[i]);
1799 static int hpsa_add_device(struct ctlr_info *h, struct hpsa_scsi_dev_t *device)
1806 if (is_logical_device(device)) /* RAID */
1807 rc = scsi_add_device(h->scsi_host, device->bus,
1808 device->target, device->lun);
1810 rc = hpsa_add_sas_device(h->sas_host, device);
1815 static int hpsa_find_outstanding_commands_for_dev(struct ctlr_info *h,
1816 struct hpsa_scsi_dev_t *dev)
1821 for (i = 0; i < h->nr_cmds; i++) {
1822 struct CommandList *c = h->cmd_pool + i;
1823 int refcount = atomic_inc_return(&c->refcount);
1825 if (refcount > 1 && hpsa_cmd_dev_match(h, c, dev,
1827 unsigned long flags;
1829 spin_lock_irqsave(&h->lock, flags); /* Implied MB */
1830 if (!hpsa_is_cmd_idle(c))
1832 spin_unlock_irqrestore(&h->lock, flags);
1842 static void hpsa_wait_for_outstanding_commands_for_dev(struct ctlr_info *h,
1843 struct hpsa_scsi_dev_t *device)
1847 int num_wait = NUM_WAIT;
1849 if (device->external)
1850 num_wait = HPSA_EH_PTRAID_TIMEOUT;
1853 cmds = hpsa_find_outstanding_commands_for_dev(h, device);
1856 if (++waits > num_wait)
1861 if (waits > num_wait) {
1862 dev_warn(&h->pdev->dev,
1863 "%s: removing device [%d:%d:%d:%d] with %d outstanding commands!\n",
1865 h->scsi_host->host_no,
1866 device->bus, device->target, device->lun, cmds);
1870 static void hpsa_remove_device(struct ctlr_info *h,
1871 struct hpsa_scsi_dev_t *device)
1873 struct scsi_device *sdev = NULL;
1879 * Allow for commands to drain
1881 device->removed = 1;
1882 hpsa_wait_for_outstanding_commands_for_dev(h, device);
1884 if (is_logical_device(device)) { /* RAID */
1885 sdev = scsi_device_lookup(h->scsi_host, device->bus,
1886 device->target, device->lun);
1888 scsi_remove_device(sdev);
1889 scsi_device_put(sdev);
1892 * We don't expect to get here. Future commands
1893 * to this device will get a selection timeout as
1894 * if the device were gone.
1896 hpsa_show_dev_msg(KERN_WARNING, h, device,
1897 "didn't find device for removal.");
1901 hpsa_remove_sas_device(device);
1905 static void adjust_hpsa_scsi_table(struct ctlr_info *h,
1906 struct hpsa_scsi_dev_t *sd[], int nsds)
1908 /* sd contains scsi3 addresses and devtypes, and inquiry
1909 * data. This function takes what's in sd to be the current
1910 * reality and updates h->dev[] to reflect that reality.
1912 int i, entry, device_change, changes = 0;
1913 struct hpsa_scsi_dev_t *csd;
1914 unsigned long flags;
1915 struct hpsa_scsi_dev_t **added, **removed;
1916 int nadded, nremoved;
1919 * A reset can cause a device status to change
1920 * re-schedule the scan to see what happened.
1922 spin_lock_irqsave(&h->reset_lock, flags);
1923 if (h->reset_in_progress) {
1924 h->drv_req_rescan = 1;
1925 spin_unlock_irqrestore(&h->reset_lock, flags);
1928 spin_unlock_irqrestore(&h->reset_lock, flags);
1930 added = kcalloc(HPSA_MAX_DEVICES, sizeof(*added), GFP_KERNEL);
1931 removed = kcalloc(HPSA_MAX_DEVICES, sizeof(*removed), GFP_KERNEL);
1933 if (!added || !removed) {
1934 dev_warn(&h->pdev->dev, "out of memory in "
1935 "adjust_hpsa_scsi_table\n");
1939 spin_lock_irqsave(&h->devlock, flags);
1941 /* find any devices in h->dev[] that are not in
1942 * sd[] and remove them from h->dev[], and for any
1943 * devices which have changed, remove the old device
1944 * info and add the new device info.
1945 * If minor device attributes change, just update
1946 * the existing device structure.
1951 while (i < h->ndevices) {
1953 device_change = hpsa_scsi_find_entry(csd, sd, nsds, &entry);
1954 if (device_change == DEVICE_NOT_FOUND) {
1956 hpsa_scsi_remove_entry(h, i, removed, &nremoved);
1957 continue; /* remove ^^^, hence i not incremented */
1958 } else if (device_change == DEVICE_CHANGED) {
1960 hpsa_scsi_replace_entry(h, i, sd[entry],
1961 added, &nadded, removed, &nremoved);
1962 /* Set it to NULL to prevent it from being freed
1963 * at the bottom of hpsa_update_scsi_devices()
1966 } else if (device_change == DEVICE_UPDATED) {
1967 hpsa_scsi_update_entry(h, i, sd[entry]);
1972 /* Now, make sure every device listed in sd[] is also
1973 * listed in h->dev[], adding them if they aren't found
1976 for (i = 0; i < nsds; i++) {
1977 if (!sd[i]) /* if already added above. */
1980 /* Don't add devices which are NOT READY, FORMAT IN PROGRESS
1981 * as the SCSI mid-layer does not handle such devices well.
1982 * It relentlessly loops sending TUR at 3Hz, then READ(10)
1983 * at 160Hz, and prevents the system from coming up.
1985 if (sd[i]->volume_offline) {
1986 hpsa_show_volume_status(h, sd[i]);
1987 hpsa_show_dev_msg(KERN_INFO, h, sd[i], "offline");
1991 device_change = hpsa_scsi_find_entry(sd[i], h->dev,
1992 h->ndevices, &entry);
1993 if (device_change == DEVICE_NOT_FOUND) {
1995 if (hpsa_scsi_add_entry(h, sd[i], added, &nadded) != 0)
1997 sd[i] = NULL; /* prevent from being freed later. */
1998 } else if (device_change == DEVICE_CHANGED) {
1999 /* should never happen... */
2001 dev_warn(&h->pdev->dev,
2002 "device unexpectedly changed.\n");
2003 /* but if it does happen, we just ignore that device */
2006 hpsa_update_log_drive_phys_drive_ptrs(h, h->dev, h->ndevices);
2009 * Now that h->dev[]->phys_disk[] is coherent, we can enable
2010 * any logical drives that need it enabled.
2012 * The raid map should be current by now.
2014 * We are updating the device list used for I/O requests.
2016 for (i = 0; i < h->ndevices; i++) {
2017 if (h->dev[i] == NULL)
2019 h->dev[i]->offload_enabled = h->dev[i]->offload_to_be_enabled;
2022 spin_unlock_irqrestore(&h->devlock, flags);
2024 /* Monitor devices which are in one of several NOT READY states to be
2025 * brought online later. This must be done without holding h->devlock,
2026 * so don't touch h->dev[]
2028 for (i = 0; i < nsds; i++) {
2029 if (!sd[i]) /* if already added above. */
2031 if (sd[i]->volume_offline)
2032 hpsa_monitor_offline_device(h, sd[i]->scsi3addr);
2035 /* Don't notify scsi mid layer of any changes the first time through
2036 * (or if there are no changes) scsi_scan_host will do it later the
2037 * first time through.
2042 /* Notify scsi mid layer of any removed devices */
2043 for (i = 0; i < nremoved; i++) {
2044 if (removed[i] == NULL)
2046 if (removed[i]->expose_device)
2047 hpsa_remove_device(h, removed[i]);
2052 /* Notify scsi mid layer of any added devices */
2053 for (i = 0; i < nadded; i++) {
2056 if (added[i] == NULL)
2058 if (!(added[i]->expose_device))
2060 rc = hpsa_add_device(h, added[i]);
2063 dev_warn(&h->pdev->dev,
2064 "addition failed %d, device not added.", rc);
2065 /* now we have to remove it from h->dev,
2066 * since it didn't get added to scsi mid layer
2068 fixup_botched_add(h, added[i]);
2069 h->drv_req_rescan = 1;
2078 * Lookup bus/target/lun and return corresponding struct hpsa_scsi_dev_t *
2079 * Assume's h->devlock is held.
2081 static struct hpsa_scsi_dev_t *lookup_hpsa_scsi_dev(struct ctlr_info *h,
2082 int bus, int target, int lun)
2085 struct hpsa_scsi_dev_t *sd;
2087 for (i = 0; i < h->ndevices; i++) {
2089 if (sd->bus == bus && sd->target == target && sd->lun == lun)
2095 static int hpsa_slave_alloc(struct scsi_device *sdev)
2097 struct hpsa_scsi_dev_t *sd = NULL;
2098 unsigned long flags;
2099 struct ctlr_info *h;
2101 h = sdev_to_hba(sdev);
2102 spin_lock_irqsave(&h->devlock, flags);
2103 if (sdev_channel(sdev) == HPSA_PHYSICAL_DEVICE_BUS) {
2104 struct scsi_target *starget;
2105 struct sas_rphy *rphy;
2107 starget = scsi_target(sdev);
2108 rphy = target_to_rphy(starget);
2109 sd = hpsa_find_device_by_sas_rphy(h, rphy);
2111 sd->target = sdev_id(sdev);
2112 sd->lun = sdev->lun;
2116 sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev),
2117 sdev_id(sdev), sdev->lun);
2119 if (sd && sd->expose_device) {
2120 atomic_set(&sd->ioaccel_cmds_out, 0);
2121 sdev->hostdata = sd;
2123 sdev->hostdata = NULL;
2124 spin_unlock_irqrestore(&h->devlock, flags);
2128 /* configure scsi device based on internal per-device structure */
2129 static int hpsa_slave_configure(struct scsi_device *sdev)
2131 struct hpsa_scsi_dev_t *sd;
2134 sd = sdev->hostdata;
2135 sdev->no_uld_attach = !sd || !sd->expose_device;
2138 sd->was_removed = 0;
2140 queue_depth = EXTERNAL_QD;
2141 sdev->eh_timeout = HPSA_EH_PTRAID_TIMEOUT;
2142 blk_queue_rq_timeout(sdev->request_queue,
2143 HPSA_EH_PTRAID_TIMEOUT);
2145 queue_depth = sd->queue_depth != 0 ?
2146 sd->queue_depth : sdev->host->can_queue;
2149 queue_depth = sdev->host->can_queue;
2151 scsi_change_queue_depth(sdev, queue_depth);
2156 static void hpsa_slave_destroy(struct scsi_device *sdev)
2158 struct hpsa_scsi_dev_t *hdev = NULL;
2160 hdev = sdev->hostdata;
2163 hdev->was_removed = 1;
2166 static void hpsa_free_ioaccel2_sg_chain_blocks(struct ctlr_info *h)
2170 if (!h->ioaccel2_cmd_sg_list)
2172 for (i = 0; i < h->nr_cmds; i++) {
2173 kfree(h->ioaccel2_cmd_sg_list[i]);
2174 h->ioaccel2_cmd_sg_list[i] = NULL;
2176 kfree(h->ioaccel2_cmd_sg_list);
2177 h->ioaccel2_cmd_sg_list = NULL;
2180 static int hpsa_allocate_ioaccel2_sg_chain_blocks(struct ctlr_info *h)
2184 if (h->chainsize <= 0)
2187 h->ioaccel2_cmd_sg_list =
2188 kcalloc(h->nr_cmds, sizeof(*h->ioaccel2_cmd_sg_list),
2190 if (!h->ioaccel2_cmd_sg_list)
2192 for (i = 0; i < h->nr_cmds; i++) {
2193 h->ioaccel2_cmd_sg_list[i] =
2194 kmalloc_array(h->maxsgentries,
2195 sizeof(*h->ioaccel2_cmd_sg_list[i]),
2197 if (!h->ioaccel2_cmd_sg_list[i])
2203 hpsa_free_ioaccel2_sg_chain_blocks(h);
2207 static void hpsa_free_sg_chain_blocks(struct ctlr_info *h)
2211 if (!h->cmd_sg_list)
2213 for (i = 0; i < h->nr_cmds; i++) {
2214 kfree(h->cmd_sg_list[i]);
2215 h->cmd_sg_list[i] = NULL;
2217 kfree(h->cmd_sg_list);
2218 h->cmd_sg_list = NULL;
2221 static int hpsa_alloc_sg_chain_blocks(struct ctlr_info *h)
2225 if (h->chainsize <= 0)
2228 h->cmd_sg_list = kcalloc(h->nr_cmds, sizeof(*h->cmd_sg_list),
2230 if (!h->cmd_sg_list)
2233 for (i = 0; i < h->nr_cmds; i++) {
2234 h->cmd_sg_list[i] = kmalloc_array(h->chainsize,
2235 sizeof(*h->cmd_sg_list[i]),
2237 if (!h->cmd_sg_list[i])
2244 hpsa_free_sg_chain_blocks(h);
2248 static int hpsa_map_ioaccel2_sg_chain_block(struct ctlr_info *h,
2249 struct io_accel2_cmd *cp, struct CommandList *c)
2251 struct ioaccel2_sg_element *chain_block;
2255 chain_block = h->ioaccel2_cmd_sg_list[c->cmdindex];
2256 chain_size = le32_to_cpu(cp->sg[0].length);
2257 temp64 = dma_map_single(&h->pdev->dev, chain_block, chain_size,
2259 if (dma_mapping_error(&h->pdev->dev, temp64)) {
2260 /* prevent subsequent unmapping */
2261 cp->sg->address = 0;
2264 cp->sg->address = cpu_to_le64(temp64);
2268 static void hpsa_unmap_ioaccel2_sg_chain_block(struct ctlr_info *h,
2269 struct io_accel2_cmd *cp)
2271 struct ioaccel2_sg_element *chain_sg;
2276 temp64 = le64_to_cpu(chain_sg->address);
2277 chain_size = le32_to_cpu(cp->sg[0].length);
2278 dma_unmap_single(&h->pdev->dev, temp64, chain_size, DMA_TO_DEVICE);
2281 static int hpsa_map_sg_chain_block(struct ctlr_info *h,
2282 struct CommandList *c)
2284 struct SGDescriptor *chain_sg, *chain_block;
2288 chain_sg = &c->SG[h->max_cmd_sg_entries - 1];
2289 chain_block = h->cmd_sg_list[c->cmdindex];
2290 chain_sg->Ext = cpu_to_le32(HPSA_SG_CHAIN);
2291 chain_len = sizeof(*chain_sg) *
2292 (le16_to_cpu(c->Header.SGTotal) - h->max_cmd_sg_entries);
2293 chain_sg->Len = cpu_to_le32(chain_len);
2294 temp64 = dma_map_single(&h->pdev->dev, chain_block, chain_len,
2296 if (dma_mapping_error(&h->pdev->dev, temp64)) {
2297 /* prevent subsequent unmapping */
2298 chain_sg->Addr = cpu_to_le64(0);
2301 chain_sg->Addr = cpu_to_le64(temp64);
2305 static void hpsa_unmap_sg_chain_block(struct ctlr_info *h,
2306 struct CommandList *c)
2308 struct SGDescriptor *chain_sg;
2310 if (le16_to_cpu(c->Header.SGTotal) <= h->max_cmd_sg_entries)
2313 chain_sg = &c->SG[h->max_cmd_sg_entries - 1];
2314 dma_unmap_single(&h->pdev->dev, le64_to_cpu(chain_sg->Addr),
2315 le32_to_cpu(chain_sg->Len), DMA_TO_DEVICE);
2319 /* Decode the various types of errors on ioaccel2 path.
2320 * Return 1 for any error that should generate a RAID path retry.
2321 * Return 0 for errors that don't require a RAID path retry.
2323 static int handle_ioaccel_mode2_error(struct ctlr_info *h,
2324 struct CommandList *c,
2325 struct scsi_cmnd *cmd,
2326 struct io_accel2_cmd *c2,
2327 struct hpsa_scsi_dev_t *dev)
2331 u32 ioaccel2_resid = 0;
2333 switch (c2->error_data.serv_response) {
2334 case IOACCEL2_SERV_RESPONSE_COMPLETE:
2335 switch (c2->error_data.status) {
2336 case IOACCEL2_STATUS_SR_TASK_COMP_GOOD:
2338 case IOACCEL2_STATUS_SR_TASK_COMP_CHK_COND:
2339 cmd->result |= SAM_STAT_CHECK_CONDITION;
2340 if (c2->error_data.data_present !=
2341 IOACCEL2_SENSE_DATA_PRESENT) {
2342 memset(cmd->sense_buffer, 0,
2343 SCSI_SENSE_BUFFERSIZE);
2346 /* copy the sense data */
2347 data_len = c2->error_data.sense_data_len;
2348 if (data_len > SCSI_SENSE_BUFFERSIZE)
2349 data_len = SCSI_SENSE_BUFFERSIZE;
2350 if (data_len > sizeof(c2->error_data.sense_data_buff))
2352 sizeof(c2->error_data.sense_data_buff);
2353 memcpy(cmd->sense_buffer,
2354 c2->error_data.sense_data_buff, data_len);
2357 case IOACCEL2_STATUS_SR_TASK_COMP_BUSY:
2360 case IOACCEL2_STATUS_SR_TASK_COMP_RES_CON:
2363 case IOACCEL2_STATUS_SR_TASK_COMP_SET_FULL:
2366 case IOACCEL2_STATUS_SR_TASK_COMP_ABORTED:
2374 case IOACCEL2_SERV_RESPONSE_FAILURE:
2375 switch (c2->error_data.status) {
2376 case IOACCEL2_STATUS_SR_IO_ERROR:
2377 case IOACCEL2_STATUS_SR_IO_ABORTED:
2378 case IOACCEL2_STATUS_SR_OVERRUN:
2381 case IOACCEL2_STATUS_SR_UNDERRUN:
2382 cmd->result = (DID_OK << 16); /* host byte */
2383 cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */
2384 ioaccel2_resid = get_unaligned_le32(
2385 &c2->error_data.resid_cnt[0]);
2386 scsi_set_resid(cmd, ioaccel2_resid);
2388 case IOACCEL2_STATUS_SR_NO_PATH_TO_DEVICE:
2389 case IOACCEL2_STATUS_SR_INVALID_DEVICE:
2390 case IOACCEL2_STATUS_SR_IOACCEL_DISABLED:
2392 * Did an HBA disk disappear? We will eventually
2393 * get a state change event from the controller but
2394 * in the meantime, we need to tell the OS that the
2395 * HBA disk is no longer there and stop I/O
2396 * from going down. This allows the potential re-insert
2397 * of the disk to get the same device node.
2399 if (dev->physical_device && dev->expose_device) {
2400 cmd->result = DID_NO_CONNECT << 16;
2402 h->drv_req_rescan = 1;
2403 dev_warn(&h->pdev->dev,
2404 "%s: device is gone!\n", __func__);
2407 * Retry by sending down the RAID path.
2408 * We will get an event from ctlr to
2409 * trigger rescan regardless.
2417 case IOACCEL2_SERV_RESPONSE_TMF_COMPLETE:
2419 case IOACCEL2_SERV_RESPONSE_TMF_SUCCESS:
2421 case IOACCEL2_SERV_RESPONSE_TMF_REJECTED:
2424 case IOACCEL2_SERV_RESPONSE_TMF_WRONG_LUN:
2434 return retry; /* retry on raid path? */
2437 static void hpsa_cmd_resolve_events(struct ctlr_info *h,
2438 struct CommandList *c)
2440 struct hpsa_scsi_dev_t *dev = c->device;
2443 * Reset c->scsi_cmd here so that the reset handler will know
2444 * this command has completed. Then, check to see if the handler is
2445 * waiting for this command, and, if so, wake it.
2447 c->scsi_cmd = SCSI_CMD_IDLE;
2448 mb(); /* Declare command idle before checking for pending events. */
2450 atomic_dec(&dev->commands_outstanding);
2451 if (dev->in_reset &&
2452 atomic_read(&dev->commands_outstanding) <= 0)
2453 wake_up_all(&h->event_sync_wait_queue);
2457 static void hpsa_cmd_resolve_and_free(struct ctlr_info *h,
2458 struct CommandList *c)
2460 hpsa_cmd_resolve_events(h, c);
2461 cmd_tagged_free(h, c);
2464 static void hpsa_cmd_free_and_done(struct ctlr_info *h,
2465 struct CommandList *c, struct scsi_cmnd *cmd)
2467 hpsa_cmd_resolve_and_free(h, c);
2468 if (cmd && cmd->scsi_done)
2469 cmd->scsi_done(cmd);
2472 static void hpsa_retry_cmd(struct ctlr_info *h, struct CommandList *c)
2474 INIT_WORK(&c->work, hpsa_command_resubmit_worker);
2475 queue_work_on(raw_smp_processor_id(), h->resubmit_wq, &c->work);
2478 static void process_ioaccel2_completion(struct ctlr_info *h,
2479 struct CommandList *c, struct scsi_cmnd *cmd,
2480 struct hpsa_scsi_dev_t *dev)
2482 struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex];
2484 /* check for good status */
2485 if (likely(c2->error_data.serv_response == 0 &&
2486 c2->error_data.status == 0))
2487 return hpsa_cmd_free_and_done(h, c, cmd);
2490 * Any RAID offload error results in retry which will use
2491 * the normal I/O path so the controller can handle whatever is
2494 if (is_logical_device(dev) &&
2495 c2->error_data.serv_response ==
2496 IOACCEL2_SERV_RESPONSE_FAILURE) {
2497 if (c2->error_data.status ==
2498 IOACCEL2_STATUS_SR_IOACCEL_DISABLED) {
2499 dev->offload_enabled = 0;
2500 dev->offload_to_be_enabled = 0;
2503 if (dev->in_reset) {
2504 cmd->result = DID_RESET << 16;
2505 return hpsa_cmd_free_and_done(h, c, cmd);
2508 return hpsa_retry_cmd(h, c);
2511 if (handle_ioaccel_mode2_error(h, c, cmd, c2, dev))
2512 return hpsa_retry_cmd(h, c);
2514 return hpsa_cmd_free_and_done(h, c, cmd);
2517 /* Returns 0 on success, < 0 otherwise. */
2518 static int hpsa_evaluate_tmf_status(struct ctlr_info *h,
2519 struct CommandList *cp)
2521 u8 tmf_status = cp->err_info->ScsiStatus;
2523 switch (tmf_status) {
2524 case CISS_TMF_COMPLETE:
2526 * CISS_TMF_COMPLETE never happens, instead,
2527 * ei->CommandStatus == 0 for this case.
2529 case CISS_TMF_SUCCESS:
2531 case CISS_TMF_INVALID_FRAME:
2532 case CISS_TMF_NOT_SUPPORTED:
2533 case CISS_TMF_FAILED:
2534 case CISS_TMF_WRONG_LUN:
2535 case CISS_TMF_OVERLAPPED_TAG:
2538 dev_warn(&h->pdev->dev, "Unknown TMF status: 0x%02x\n",
2545 static void complete_scsi_command(struct CommandList *cp)
2547 struct scsi_cmnd *cmd;
2548 struct ctlr_info *h;
2549 struct ErrorInfo *ei;
2550 struct hpsa_scsi_dev_t *dev;
2551 struct io_accel2_cmd *c2;
2554 u8 asc; /* additional sense code */
2555 u8 ascq; /* additional sense code qualifier */
2556 unsigned long sense_data_size;
2563 cmd->result = DID_NO_CONNECT << 16;
2564 return hpsa_cmd_free_and_done(h, cp, cmd);
2567 dev = cmd->device->hostdata;
2569 cmd->result = DID_NO_CONNECT << 16;
2570 return hpsa_cmd_free_and_done(h, cp, cmd);
2572 c2 = &h->ioaccel2_cmd_pool[cp->cmdindex];
2574 scsi_dma_unmap(cmd); /* undo the DMA mappings */
2575 if ((cp->cmd_type == CMD_SCSI) &&
2576 (le16_to_cpu(cp->Header.SGTotal) > h->max_cmd_sg_entries))
2577 hpsa_unmap_sg_chain_block(h, cp);
2579 if ((cp->cmd_type == CMD_IOACCEL2) &&
2580 (c2->sg[0].chain_indicator == IOACCEL2_CHAIN))
2581 hpsa_unmap_ioaccel2_sg_chain_block(h, c2);
2583 cmd->result = (DID_OK << 16); /* host byte */
2584 cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */
2586 /* SCSI command has already been cleaned up in SML */
2587 if (dev->was_removed) {
2588 hpsa_cmd_resolve_and_free(h, cp);
2592 if (cp->cmd_type == CMD_IOACCEL2 || cp->cmd_type == CMD_IOACCEL1) {
2593 if (dev->physical_device && dev->expose_device &&
2595 cmd->result = DID_NO_CONNECT << 16;
2596 return hpsa_cmd_free_and_done(h, cp, cmd);
2598 if (likely(cp->phys_disk != NULL))
2599 atomic_dec(&cp->phys_disk->ioaccel_cmds_out);
2603 * We check for lockup status here as it may be set for
2604 * CMD_SCSI, CMD_IOACCEL1 and CMD_IOACCEL2 commands by
2605 * fail_all_oustanding_cmds()
2607 if (unlikely(ei->CommandStatus == CMD_CTLR_LOCKUP)) {
2608 /* DID_NO_CONNECT will prevent a retry */
2609 cmd->result = DID_NO_CONNECT << 16;
2610 return hpsa_cmd_free_and_done(h, cp, cmd);
2613 if (cp->cmd_type == CMD_IOACCEL2)
2614 return process_ioaccel2_completion(h, cp, cmd, dev);
2616 scsi_set_resid(cmd, ei->ResidualCnt);
2617 if (ei->CommandStatus == 0)
2618 return hpsa_cmd_free_and_done(h, cp, cmd);
2620 /* For I/O accelerator commands, copy over some fields to the normal
2621 * CISS header used below for error handling.
2623 if (cp->cmd_type == CMD_IOACCEL1) {
2624 struct io_accel1_cmd *c = &h->ioaccel_cmd_pool[cp->cmdindex];
2625 cp->Header.SGList = scsi_sg_count(cmd);
2626 cp->Header.SGTotal = cpu_to_le16(cp->Header.SGList);
2627 cp->Request.CDBLen = le16_to_cpu(c->io_flags) &
2628 IOACCEL1_IOFLAGS_CDBLEN_MASK;
2629 cp->Header.tag = c->tag;
2630 memcpy(cp->Header.LUN.LunAddrBytes, c->CISS_LUN, 8);
2631 memcpy(cp->Request.CDB, c->CDB, cp->Request.CDBLen);
2633 /* Any RAID offload error results in retry which will use
2634 * the normal I/O path so the controller can handle whatever's
2637 if (is_logical_device(dev)) {
2638 if (ei->CommandStatus == CMD_IOACCEL_DISABLED)
2639 dev->offload_enabled = 0;
2640 return hpsa_retry_cmd(h, cp);
2644 /* an error has occurred */
2645 switch (ei->CommandStatus) {
2647 case CMD_TARGET_STATUS:
2648 cmd->result |= ei->ScsiStatus;
2649 /* copy the sense data */
2650 if (SCSI_SENSE_BUFFERSIZE < sizeof(ei->SenseInfo))
2651 sense_data_size = SCSI_SENSE_BUFFERSIZE;
2653 sense_data_size = sizeof(ei->SenseInfo);
2654 if (ei->SenseLen < sense_data_size)
2655 sense_data_size = ei->SenseLen;
2656 memcpy(cmd->sense_buffer, ei->SenseInfo, sense_data_size);
2658 decode_sense_data(ei->SenseInfo, sense_data_size,
2659 &sense_key, &asc, &ascq);
2660 if (ei->ScsiStatus == SAM_STAT_CHECK_CONDITION) {
2661 switch (sense_key) {
2662 case ABORTED_COMMAND:
2663 cmd->result |= DID_SOFT_ERROR << 16;
2665 case UNIT_ATTENTION:
2666 if (asc == 0x3F && ascq == 0x0E)
2667 h->drv_req_rescan = 1;
2669 case ILLEGAL_REQUEST:
2670 if (asc == 0x25 && ascq == 0x00) {
2672 cmd->result = DID_NO_CONNECT << 16;
2678 /* Problem was not a check condition
2679 * Pass it up to the upper layers...
2681 if (ei->ScsiStatus) {
2682 dev_warn(&h->pdev->dev, "cp %p has status 0x%x "
2683 "Sense: 0x%x, ASC: 0x%x, ASCQ: 0x%x, "
2684 "Returning result: 0x%x\n",
2686 sense_key, asc, ascq,
2688 } else { /* scsi status is zero??? How??? */
2689 dev_warn(&h->pdev->dev, "cp %p SCSI status was 0. "
2690 "Returning no connection.\n", cp),
2692 /* Ordinarily, this case should never happen,
2693 * but there is a bug in some released firmware
2694 * revisions that allows it to happen if, for
2695 * example, a 4100 backplane loses power and
2696 * the tape drive is in it. We assume that
2697 * it's a fatal error of some kind because we
2698 * can't show that it wasn't. We will make it
2699 * look like selection timeout since that is
2700 * the most common reason for this to occur,
2701 * and it's severe enough.
2704 cmd->result = DID_NO_CONNECT << 16;
2708 case CMD_DATA_UNDERRUN: /* let mid layer handle it. */
2710 case CMD_DATA_OVERRUN:
2711 dev_warn(&h->pdev->dev,
2712 "CDB %16phN data overrun\n", cp->Request.CDB);
2715 /* print_bytes(cp, sizeof(*cp), 1, 0);
2717 /* We get CMD_INVALID if you address a non-existent device
2718 * instead of a selection timeout (no response). You will
2719 * see this if you yank out a drive, then try to access it.
2720 * This is kind of a shame because it means that any other
2721 * CMD_INVALID (e.g. driver bug) will get interpreted as a
2722 * missing target. */
2723 cmd->result = DID_NO_CONNECT << 16;
2726 case CMD_PROTOCOL_ERR:
2727 cmd->result = DID_ERROR << 16;
2728 dev_warn(&h->pdev->dev, "CDB %16phN : protocol error\n",
2731 case CMD_HARDWARE_ERR:
2732 cmd->result = DID_ERROR << 16;
2733 dev_warn(&h->pdev->dev, "CDB %16phN : hardware error\n",
2736 case CMD_CONNECTION_LOST:
2737 cmd->result = DID_ERROR << 16;
2738 dev_warn(&h->pdev->dev, "CDB %16phN : connection lost\n",
2742 cmd->result = DID_ABORT << 16;
2744 case CMD_ABORT_FAILED:
2745 cmd->result = DID_ERROR << 16;
2746 dev_warn(&h->pdev->dev, "CDB %16phN : abort failed\n",
2749 case CMD_UNSOLICITED_ABORT:
2750 cmd->result = DID_SOFT_ERROR << 16; /* retry the command */
2751 dev_warn(&h->pdev->dev, "CDB %16phN : unsolicited abort\n",
2755 cmd->result = DID_TIME_OUT << 16;
2756 dev_warn(&h->pdev->dev, "CDB %16phN timed out\n",
2759 case CMD_UNABORTABLE:
2760 cmd->result = DID_ERROR << 16;
2761 dev_warn(&h->pdev->dev, "Command unabortable\n");
2763 case CMD_TMF_STATUS:
2764 if (hpsa_evaluate_tmf_status(h, cp)) /* TMF failed? */
2765 cmd->result = DID_ERROR << 16;
2767 case CMD_IOACCEL_DISABLED:
2768 /* This only handles the direct pass-through case since RAID
2769 * offload is handled above. Just attempt a retry.
2771 cmd->result = DID_SOFT_ERROR << 16;
2772 dev_warn(&h->pdev->dev,
2773 "cp %p had HP SSD Smart Path error\n", cp);
2776 cmd->result = DID_ERROR << 16;
2777 dev_warn(&h->pdev->dev, "cp %p returned unknown status %x\n",
2778 cp, ei->CommandStatus);
2781 return hpsa_cmd_free_and_done(h, cp, cmd);
2784 static void hpsa_pci_unmap(struct pci_dev *pdev, struct CommandList *c,
2785 int sg_used, enum dma_data_direction data_direction)
2789 for (i = 0; i < sg_used; i++)
2790 dma_unmap_single(&pdev->dev, le64_to_cpu(c->SG[i].Addr),
2791 le32_to_cpu(c->SG[i].Len),
2795 static int hpsa_map_one(struct pci_dev *pdev,
2796 struct CommandList *cp,
2799 enum dma_data_direction data_direction)
2803 if (buflen == 0 || data_direction == DMA_NONE) {
2804 cp->Header.SGList = 0;
2805 cp->Header.SGTotal = cpu_to_le16(0);
2809 addr64 = dma_map_single(&pdev->dev, buf, buflen, data_direction);
2810 if (dma_mapping_error(&pdev->dev, addr64)) {
2811 /* Prevent subsequent unmap of something never mapped */
2812 cp->Header.SGList = 0;
2813 cp->Header.SGTotal = cpu_to_le16(0);
2816 cp->SG[0].Addr = cpu_to_le64(addr64);
2817 cp->SG[0].Len = cpu_to_le32(buflen);
2818 cp->SG[0].Ext = cpu_to_le32(HPSA_SG_LAST); /* we are not chaining */
2819 cp->Header.SGList = 1; /* no. SGs contig in this cmd */
2820 cp->Header.SGTotal = cpu_to_le16(1); /* total sgs in cmd list */
2824 #define NO_TIMEOUT ((unsigned long) -1)
2825 #define DEFAULT_TIMEOUT 30000 /* milliseconds */
2826 static int hpsa_scsi_do_simple_cmd_core(struct ctlr_info *h,
2827 struct CommandList *c, int reply_queue, unsigned long timeout_msecs)
2829 DECLARE_COMPLETION_ONSTACK(wait);
2832 __enqueue_cmd_and_start_io(h, c, reply_queue);
2833 if (timeout_msecs == NO_TIMEOUT) {
2834 /* TODO: get rid of this no-timeout thing */
2835 wait_for_completion_io(&wait);
2838 if (!wait_for_completion_io_timeout(&wait,
2839 msecs_to_jiffies(timeout_msecs))) {
2840 dev_warn(&h->pdev->dev, "Command timed out.\n");
2846 static int hpsa_scsi_do_simple_cmd(struct ctlr_info *h, struct CommandList *c,
2847 int reply_queue, unsigned long timeout_msecs)
2849 if (unlikely(lockup_detected(h))) {
2850 c->err_info->CommandStatus = CMD_CTLR_LOCKUP;
2853 return hpsa_scsi_do_simple_cmd_core(h, c, reply_queue, timeout_msecs);
2856 static u32 lockup_detected(struct ctlr_info *h)
2859 u32 rc, *lockup_detected;
2862 lockup_detected = per_cpu_ptr(h->lockup_detected, cpu);
2863 rc = *lockup_detected;
2868 #define MAX_DRIVER_CMD_RETRIES 25
2869 static int hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h,
2870 struct CommandList *c, enum dma_data_direction data_direction,
2871 unsigned long timeout_msecs)
2873 int backoff_time = 10, retry_count = 0;
2877 memset(c->err_info, 0, sizeof(*c->err_info));
2878 rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE,
2883 if (retry_count > 3) {
2884 msleep(backoff_time);
2885 if (backoff_time < 1000)
2888 } while ((check_for_unit_attention(h, c) ||
2889 check_for_busy(h, c)) &&
2890 retry_count <= MAX_DRIVER_CMD_RETRIES);
2891 hpsa_pci_unmap(h->pdev, c, 1, data_direction);
2892 if (retry_count > MAX_DRIVER_CMD_RETRIES)
2897 static void hpsa_print_cmd(struct ctlr_info *h, char *txt,
2898 struct CommandList *c)
2900 const u8 *cdb = c->Request.CDB;
2901 const u8 *lun = c->Header.LUN.LunAddrBytes;
2903 dev_warn(&h->pdev->dev, "%s: LUN:%8phN CDB:%16phN\n",
2907 static void hpsa_scsi_interpret_error(struct ctlr_info *h,
2908 struct CommandList *cp)
2910 const struct ErrorInfo *ei = cp->err_info;
2911 struct device *d = &cp->h->pdev->dev;
2912 u8 sense_key, asc, ascq;
2915 switch (ei->CommandStatus) {
2916 case CMD_TARGET_STATUS:
2917 if (ei->SenseLen > sizeof(ei->SenseInfo))
2918 sense_len = sizeof(ei->SenseInfo);
2920 sense_len = ei->SenseLen;
2921 decode_sense_data(ei->SenseInfo, sense_len,
2922 &sense_key, &asc, &ascq);
2923 hpsa_print_cmd(h, "SCSI status", cp);
2924 if (ei->ScsiStatus == SAM_STAT_CHECK_CONDITION)
2925 dev_warn(d, "SCSI Status = 02, Sense key = 0x%02x, ASC = 0x%02x, ASCQ = 0x%02x\n",
2926 sense_key, asc, ascq);
2928 dev_warn(d, "SCSI Status = 0x%02x\n", ei->ScsiStatus);
2929 if (ei->ScsiStatus == 0)
2930 dev_warn(d, "SCSI status is abnormally zero. "
2931 "(probably indicates selection timeout "
2932 "reported incorrectly due to a known "
2933 "firmware bug, circa July, 2001.)\n");
2935 case CMD_DATA_UNDERRUN: /* let mid layer handle it. */
2937 case CMD_DATA_OVERRUN:
2938 hpsa_print_cmd(h, "overrun condition", cp);
2941 /* controller unfortunately reports SCSI passthru's
2942 * to non-existent targets as invalid commands.
2944 hpsa_print_cmd(h, "invalid command", cp);
2945 dev_warn(d, "probably means device no longer present\n");
2948 case CMD_PROTOCOL_ERR:
2949 hpsa_print_cmd(h, "protocol error", cp);
2951 case CMD_HARDWARE_ERR:
2952 hpsa_print_cmd(h, "hardware error", cp);
2954 case CMD_CONNECTION_LOST:
2955 hpsa_print_cmd(h, "connection lost", cp);
2958 hpsa_print_cmd(h, "aborted", cp);
2960 case CMD_ABORT_FAILED:
2961 hpsa_print_cmd(h, "abort failed", cp);
2963 case CMD_UNSOLICITED_ABORT:
2964 hpsa_print_cmd(h, "unsolicited abort", cp);
2967 hpsa_print_cmd(h, "timed out", cp);
2969 case CMD_UNABORTABLE:
2970 hpsa_print_cmd(h, "unabortable", cp);
2972 case CMD_CTLR_LOCKUP:
2973 hpsa_print_cmd(h, "controller lockup detected", cp);
2976 hpsa_print_cmd(h, "unknown status", cp);
2977 dev_warn(d, "Unknown command status %x\n",
2982 static int hpsa_do_receive_diagnostic(struct ctlr_info *h, u8 *scsi3addr,
2983 u8 page, u8 *buf, size_t bufsize)
2986 struct CommandList *c;
2987 struct ErrorInfo *ei;
2990 if (fill_cmd(c, RECEIVE_DIAGNOSTIC, h, buf, bufsize,
2991 page, scsi3addr, TYPE_CMD)) {
2995 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE,
3000 if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
3001 hpsa_scsi_interpret_error(h, c);
3009 static u64 hpsa_get_enclosure_logical_identifier(struct ctlr_info *h,
3016 buf = kzalloc(1024, GFP_KERNEL);
3020 rc = hpsa_do_receive_diagnostic(h, scsi3addr, RECEIVE_DIAGNOSTIC,
3026 sa = get_unaligned_be64(buf+12);
3033 static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr,
3034 u16 page, unsigned char *buf,
3035 unsigned char bufsize)
3038 struct CommandList *c;
3039 struct ErrorInfo *ei;
3043 if (fill_cmd(c, HPSA_INQUIRY, h, buf, bufsize,
3044 page, scsi3addr, TYPE_CMD)) {
3048 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE,
3053 if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
3054 hpsa_scsi_interpret_error(h, c);
3062 static int hpsa_send_reset(struct ctlr_info *h, struct hpsa_scsi_dev_t *dev,
3063 u8 reset_type, int reply_queue)
3066 struct CommandList *c;
3067 struct ErrorInfo *ei;
3072 /* fill_cmd can't fail here, no data buffer to map. */
3073 (void) fill_cmd(c, reset_type, h, NULL, 0, 0, dev->scsi3addr, TYPE_MSG);
3074 rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT);
3076 dev_warn(&h->pdev->dev, "Failed to send reset command\n");
3079 /* no unmap needed here because no data xfer. */
3082 if (ei->CommandStatus != 0) {
3083 hpsa_scsi_interpret_error(h, c);
3091 static bool hpsa_cmd_dev_match(struct ctlr_info *h, struct CommandList *c,
3092 struct hpsa_scsi_dev_t *dev,
3093 unsigned char *scsi3addr)
3097 struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex];
3098 struct hpsa_tmf_struct *ac = (struct hpsa_tmf_struct *) c2;
3100 if (hpsa_is_cmd_idle(c))
3103 switch (c->cmd_type) {
3105 case CMD_IOCTL_PEND:
3106 match = !memcmp(scsi3addr, &c->Header.LUN.LunAddrBytes,
3107 sizeof(c->Header.LUN.LunAddrBytes));
3112 if (c->phys_disk == dev) {
3113 /* HBA mode match */
3116 /* Possible RAID mode -- check each phys dev. */
3117 /* FIXME: Do we need to take out a lock here? If
3118 * so, we could just call hpsa_get_pdisk_of_ioaccel2()
3120 for (i = 0; i < dev->nphysical_disks && !match; i++) {
3121 /* FIXME: an alternate test might be
3123 * match = dev->phys_disk[i]->ioaccel_handle
3124 * == c2->scsi_nexus; */
3125 match = dev->phys_disk[i] == c->phys_disk;
3131 for (i = 0; i < dev->nphysical_disks && !match; i++) {
3132 match = dev->phys_disk[i]->ioaccel_handle ==
3133 le32_to_cpu(ac->it_nexus);
3137 case 0: /* The command is in the middle of being initialized. */
3142 dev_err(&h->pdev->dev, "unexpected cmd_type: %d\n",
3150 static int hpsa_do_reset(struct ctlr_info *h, struct hpsa_scsi_dev_t *dev,
3151 u8 reset_type, int reply_queue)
3155 /* We can really only handle one reset at a time */
3156 if (mutex_lock_interruptible(&h->reset_mutex) == -EINTR) {
3157 dev_warn(&h->pdev->dev, "concurrent reset wait interrupted.\n");
3161 rc = hpsa_send_reset(h, dev, reset_type, reply_queue);
3163 /* incremented by sending the reset request */
3164 atomic_dec(&dev->commands_outstanding);
3165 wait_event(h->event_sync_wait_queue,
3166 atomic_read(&dev->commands_outstanding) <= 0 ||
3167 lockup_detected(h));
3170 if (unlikely(lockup_detected(h))) {
3171 dev_warn(&h->pdev->dev,
3172 "Controller lockup detected during reset wait\n");
3177 rc = wait_for_device_to_become_ready(h, dev->scsi3addr, 0);
3179 mutex_unlock(&h->reset_mutex);
3183 static void hpsa_get_raid_level(struct ctlr_info *h,
3184 unsigned char *scsi3addr, unsigned char *raid_level)
3189 *raid_level = RAID_UNKNOWN;
3190 buf = kzalloc(64, GFP_KERNEL);
3194 if (!hpsa_vpd_page_supported(h, scsi3addr,
3195 HPSA_VPD_LV_DEVICE_GEOMETRY))
3198 rc = hpsa_scsi_do_inquiry(h, scsi3addr, VPD_PAGE |
3199 HPSA_VPD_LV_DEVICE_GEOMETRY, buf, 64);
3202 *raid_level = buf[8];
3203 if (*raid_level > RAID_UNKNOWN)
3204 *raid_level = RAID_UNKNOWN;
3210 #define HPSA_MAP_DEBUG
3211 #ifdef HPSA_MAP_DEBUG
3212 static void hpsa_debug_map_buff(struct ctlr_info *h, int rc,
3213 struct raid_map_data *map_buff)
3215 struct raid_map_disk_data *dd = &map_buff->data[0];
3217 u16 map_cnt, row_cnt, disks_per_row;
3222 /* Show details only if debugging has been activated. */
3223 if (h->raid_offload_debug < 2)
3226 dev_info(&h->pdev->dev, "structure_size = %u\n",
3227 le32_to_cpu(map_buff->structure_size));
3228 dev_info(&h->pdev->dev, "volume_blk_size = %u\n",
3229 le32_to_cpu(map_buff->volume_blk_size));
3230 dev_info(&h->pdev->dev, "volume_blk_cnt = 0x%llx\n",
3231 le64_to_cpu(map_buff->volume_blk_cnt));
3232 dev_info(&h->pdev->dev, "physicalBlockShift = %u\n",
3233 map_buff->phys_blk_shift);
3234 dev_info(&h->pdev->dev, "parity_rotation_shift = %u\n",
3235 map_buff->parity_rotation_shift);
3236 dev_info(&h->pdev->dev, "strip_size = %u\n",
3237 le16_to_cpu(map_buff->strip_size));
3238 dev_info(&h->pdev->dev, "disk_starting_blk = 0x%llx\n",
3239 le64_to_cpu(map_buff->disk_starting_blk));
3240 dev_info(&h->pdev->dev, "disk_blk_cnt = 0x%llx\n",
3241 le64_to_cpu(map_buff->disk_blk_cnt));
3242 dev_info(&h->pdev->dev, "data_disks_per_row = %u\n",
3243 le16_to_cpu(map_buff->data_disks_per_row));
3244 dev_info(&h->pdev->dev, "metadata_disks_per_row = %u\n",
3245 le16_to_cpu(map_buff->metadata_disks_per_row));
3246 dev_info(&h->pdev->dev, "row_cnt = %u\n",
3247 le16_to_cpu(map_buff->row_cnt));
3248 dev_info(&h->pdev->dev, "layout_map_count = %u\n",
3249 le16_to_cpu(map_buff->layout_map_count));
3250 dev_info(&h->pdev->dev, "flags = 0x%x\n",
3251 le16_to_cpu(map_buff->flags));
3252 dev_info(&h->pdev->dev, "encryption = %s\n",
3253 le16_to_cpu(map_buff->flags) &
3254 RAID_MAP_FLAG_ENCRYPT_ON ? "ON" : "OFF");
3255 dev_info(&h->pdev->dev, "dekindex = %u\n",
3256 le16_to_cpu(map_buff->dekindex));
3257 map_cnt = le16_to_cpu(map_buff->layout_map_count);
3258 for (map = 0; map < map_cnt; map++) {
3259 dev_info(&h->pdev->dev, "Map%u:\n", map);
3260 row_cnt = le16_to_cpu(map_buff->row_cnt);
3261 for (row = 0; row < row_cnt; row++) {
3262 dev_info(&h->pdev->dev, " Row%u:\n", row);
3264 le16_to_cpu(map_buff->data_disks_per_row);
3265 for (col = 0; col < disks_per_row; col++, dd++)
3266 dev_info(&h->pdev->dev,
3267 " D%02u: h=0x%04x xor=%u,%u\n",
3268 col, dd->ioaccel_handle,
3269 dd->xor_mult[0], dd->xor_mult[1]);
3271 le16_to_cpu(map_buff->metadata_disks_per_row);
3272 for (col = 0; col < disks_per_row; col++, dd++)
3273 dev_info(&h->pdev->dev,
3274 " M%02u: h=0x%04x xor=%u,%u\n",
3275 col, dd->ioaccel_handle,
3276 dd->xor_mult[0], dd->xor_mult[1]);
3281 static void hpsa_debug_map_buff(__attribute__((unused)) struct ctlr_info *h,
3282 __attribute__((unused)) int rc,
3283 __attribute__((unused)) struct raid_map_data *map_buff)
3288 static int hpsa_get_raid_map(struct ctlr_info *h,
3289 unsigned char *scsi3addr, struct hpsa_scsi_dev_t *this_device)
3292 struct CommandList *c;
3293 struct ErrorInfo *ei;
3297 if (fill_cmd(c, HPSA_GET_RAID_MAP, h, &this_device->raid_map,
3298 sizeof(this_device->raid_map), 0,
3299 scsi3addr, TYPE_CMD)) {
3300 dev_warn(&h->pdev->dev, "hpsa_get_raid_map fill_cmd failed\n");
3304 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE,
3309 if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
3310 hpsa_scsi_interpret_error(h, c);
3316 /* @todo in the future, dynamically allocate RAID map memory */
3317 if (le32_to_cpu(this_device->raid_map.structure_size) >
3318 sizeof(this_device->raid_map)) {
3319 dev_warn(&h->pdev->dev, "RAID map size is too large!\n");
3322 hpsa_debug_map_buff(h, rc, &this_device->raid_map);
3329 static int hpsa_bmic_sense_subsystem_information(struct ctlr_info *h,
3330 unsigned char scsi3addr[], u16 bmic_device_index,
3331 struct bmic_sense_subsystem_info *buf, size_t bufsize)
3334 struct CommandList *c;
3335 struct ErrorInfo *ei;
3339 rc = fill_cmd(c, BMIC_SENSE_SUBSYSTEM_INFORMATION, h, buf, bufsize,
3340 0, RAID_CTLR_LUNID, TYPE_CMD);
3344 c->Request.CDB[2] = bmic_device_index & 0xff;
3345 c->Request.CDB[9] = (bmic_device_index >> 8) & 0xff;
3347 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE,
3352 if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
3353 hpsa_scsi_interpret_error(h, c);
3361 static int hpsa_bmic_id_controller(struct ctlr_info *h,
3362 struct bmic_identify_controller *buf, size_t bufsize)
3365 struct CommandList *c;
3366 struct ErrorInfo *ei;
3370 rc = fill_cmd(c, BMIC_IDENTIFY_CONTROLLER, h, buf, bufsize,
3371 0, RAID_CTLR_LUNID, TYPE_CMD);
3375 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE,
3380 if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
3381 hpsa_scsi_interpret_error(h, c);
3389 static int hpsa_bmic_id_physical_device(struct ctlr_info *h,
3390 unsigned char scsi3addr[], u16 bmic_device_index,
3391 struct bmic_identify_physical_device *buf, size_t bufsize)
3394 struct CommandList *c;
3395 struct ErrorInfo *ei;
3398 rc = fill_cmd(c, BMIC_IDENTIFY_PHYSICAL_DEVICE, h, buf, bufsize,
3399 0, RAID_CTLR_LUNID, TYPE_CMD);
3403 c->Request.CDB[2] = bmic_device_index & 0xff;
3404 c->Request.CDB[9] = (bmic_device_index >> 8) & 0xff;
3406 hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE,
3409 if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
3410 hpsa_scsi_interpret_error(h, c);
3420 * get enclosure information
3421 * struct ReportExtendedLUNdata *rlep - Used for BMIC drive number
3422 * struct hpsa_scsi_dev_t *encl_dev - device entry for enclosure
3423 * Uses id_physical_device to determine the box_index.
3425 static void hpsa_get_enclosure_info(struct ctlr_info *h,
3426 unsigned char *scsi3addr,
3427 struct ReportExtendedLUNdata *rlep, int rle_index,
3428 struct hpsa_scsi_dev_t *encl_dev)
3431 struct CommandList *c = NULL;
3432 struct ErrorInfo *ei = NULL;
3433 struct bmic_sense_storage_box_params *bssbp = NULL;
3434 struct bmic_identify_physical_device *id_phys = NULL;
3435 struct ext_report_lun_entry *rle = &rlep->LUN[rle_index];
3436 u16 bmic_device_index = 0;
3439 hpsa_get_enclosure_logical_identifier(h, scsi3addr);
3441 bmic_device_index = GET_BMIC_DRIVE_NUMBER(&rle->lunid[0]);
3443 if (encl_dev->target == -1 || encl_dev->lun == -1) {
3448 if (bmic_device_index == 0xFF00 || MASKED_DEVICE(&rle->lunid[0])) {
3453 bssbp = kzalloc(sizeof(*bssbp), GFP_KERNEL);
3457 id_phys = kzalloc(sizeof(*id_phys), GFP_KERNEL);
3461 rc = hpsa_bmic_id_physical_device(h, scsi3addr, bmic_device_index,
3462 id_phys, sizeof(*id_phys));
3464 dev_warn(&h->pdev->dev, "%s: id_phys failed %d bdi[0x%x]\n",
3465 __func__, encl_dev->external, bmic_device_index);
3471 rc = fill_cmd(c, BMIC_SENSE_STORAGE_BOX_PARAMS, h, bssbp,
3472 sizeof(*bssbp), 0, RAID_CTLR_LUNID, TYPE_CMD);
3477 if (id_phys->phys_connector[1] == 'E')
3478 c->Request.CDB[5] = id_phys->box_index;
3480 c->Request.CDB[5] = 0;
3482 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE,
3488 if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
3493 encl_dev->box[id_phys->active_path_number] = bssbp->phys_box_on_port;
3494 memcpy(&encl_dev->phys_connector[id_phys->active_path_number],
3495 bssbp->phys_connector, sizeof(bssbp->phys_connector));
3506 hpsa_show_dev_msg(KERN_INFO, h, encl_dev,
3507 "Error, could not get enclosure information");
3510 static u64 hpsa_get_sas_address_from_report_physical(struct ctlr_info *h,
3511 unsigned char *scsi3addr)
3513 struct ReportExtendedLUNdata *physdev;
3518 physdev = kzalloc(sizeof(*physdev), GFP_KERNEL);
3522 if (hpsa_scsi_do_report_phys_luns(h, physdev, sizeof(*physdev))) {
3523 dev_err(&h->pdev->dev, "report physical LUNs failed.\n");
3527 nphysicals = get_unaligned_be32(physdev->LUNListLength) / 24;
3529 for (i = 0; i < nphysicals; i++)
3530 if (!memcmp(&physdev->LUN[i].lunid[0], scsi3addr, 8)) {
3531 sa = get_unaligned_be64(&physdev->LUN[i].wwid[0]);
3540 static void hpsa_get_sas_address(struct ctlr_info *h, unsigned char *scsi3addr,
3541 struct hpsa_scsi_dev_t *dev)
3546 if (is_hba_lunid(scsi3addr)) {
3547 struct bmic_sense_subsystem_info *ssi;
3549 ssi = kzalloc(sizeof(*ssi), GFP_KERNEL);
3553 rc = hpsa_bmic_sense_subsystem_information(h,
3554 scsi3addr, 0, ssi, sizeof(*ssi));
3556 sa = get_unaligned_be64(ssi->primary_world_wide_id);
3557 h->sas_address = sa;
3562 sa = hpsa_get_sas_address_from_report_physical(h, scsi3addr);
3564 dev->sas_address = sa;
3567 static void hpsa_ext_ctrl_present(struct ctlr_info *h,
3568 struct ReportExtendedLUNdata *physdev)
3573 if (h->discovery_polling)
3576 nphysicals = (get_unaligned_be32(physdev->LUNListLength) / 24) + 1;
3578 for (i = 0; i < nphysicals; i++) {
3579 if (physdev->LUN[i].device_type ==
3580 BMIC_DEVICE_TYPE_CONTROLLER
3581 && !is_hba_lunid(physdev->LUN[i].lunid)) {
3582 dev_info(&h->pdev->dev,
3583 "External controller present, activate discovery polling and disable rld caching\n");
3584 hpsa_disable_rld_caching(h);
3585 h->discovery_polling = 1;
3591 /* Get a device id from inquiry page 0x83 */
3592 static bool hpsa_vpd_page_supported(struct ctlr_info *h,
3593 unsigned char scsi3addr[], u8 page)
3598 unsigned char *buf, bufsize;
3600 buf = kzalloc(256, GFP_KERNEL);
3604 /* Get the size of the page list first */
3605 rc = hpsa_scsi_do_inquiry(h, scsi3addr,
3606 VPD_PAGE | HPSA_VPD_SUPPORTED_PAGES,
3607 buf, HPSA_VPD_HEADER_SZ);
3609 goto exit_unsupported;
3611 if ((pages + HPSA_VPD_HEADER_SZ) <= 255)
3612 bufsize = pages + HPSA_VPD_HEADER_SZ;
3616 /* Get the whole VPD page list */
3617 rc = hpsa_scsi_do_inquiry(h, scsi3addr,
3618 VPD_PAGE | HPSA_VPD_SUPPORTED_PAGES,
3621 goto exit_unsupported;
3624 for (i = 1; i <= pages; i++)
3625 if (buf[3 + i] == page)
3626 goto exit_supported;
3636 * Called during a scan operation.
3637 * Sets ioaccel status on the new device list, not the existing device list
3639 * The device list used during I/O will be updated later in
3640 * adjust_hpsa_scsi_table.
3642 static void hpsa_get_ioaccel_status(struct ctlr_info *h,
3643 unsigned char *scsi3addr, struct hpsa_scsi_dev_t *this_device)
3649 this_device->offload_config = 0;
3650 this_device->offload_enabled = 0;
3651 this_device->offload_to_be_enabled = 0;
3653 buf = kzalloc(64, GFP_KERNEL);
3656 if (!hpsa_vpd_page_supported(h, scsi3addr, HPSA_VPD_LV_IOACCEL_STATUS))
3658 rc = hpsa_scsi_do_inquiry(h, scsi3addr,
3659 VPD_PAGE | HPSA_VPD_LV_IOACCEL_STATUS, buf, 64);
3663 #define IOACCEL_STATUS_BYTE 4
3664 #define OFFLOAD_CONFIGURED_BIT 0x01
3665 #define OFFLOAD_ENABLED_BIT 0x02
3666 ioaccel_status = buf[IOACCEL_STATUS_BYTE];
3667 this_device->offload_config =
3668 !!(ioaccel_status & OFFLOAD_CONFIGURED_BIT);
3669 if (this_device->offload_config) {
3670 this_device->offload_to_be_enabled =
3671 !!(ioaccel_status & OFFLOAD_ENABLED_BIT);
3672 if (hpsa_get_raid_map(h, scsi3addr, this_device))
3673 this_device->offload_to_be_enabled = 0;
3681 /* Get the device id from inquiry page 0x83 */
3682 static int hpsa_get_device_id(struct ctlr_info *h, unsigned char *scsi3addr,
3683 unsigned char *device_id, int index, int buflen)
3688 /* Does controller have VPD for device id? */
3689 if (!hpsa_vpd_page_supported(h, scsi3addr, HPSA_VPD_LV_DEVICE_ID))
3690 return 1; /* not supported */
3692 buf = kzalloc(64, GFP_KERNEL);
3696 rc = hpsa_scsi_do_inquiry(h, scsi3addr, VPD_PAGE |
3697 HPSA_VPD_LV_DEVICE_ID, buf, 64);
3701 memcpy(device_id, &buf[8], buflen);
3706 return rc; /*0 - got id, otherwise, didn't */
3709 static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical,
3710 void *buf, int bufsize,
3711 int extended_response)
3714 struct CommandList *c;
3715 unsigned char scsi3addr[8];
3716 struct ErrorInfo *ei;
3720 /* address the controller */
3721 memset(scsi3addr, 0, sizeof(scsi3addr));
3722 if (fill_cmd(c, logical ? HPSA_REPORT_LOG : HPSA_REPORT_PHYS, h,
3723 buf, bufsize, 0, scsi3addr, TYPE_CMD)) {
3727 if (extended_response)
3728 c->Request.CDB[1] = extended_response;
3729 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE,
3734 if (ei->CommandStatus != 0 &&
3735 ei->CommandStatus != CMD_DATA_UNDERRUN) {
3736 hpsa_scsi_interpret_error(h, c);
3739 struct ReportLUNdata *rld = buf;
3741 if (rld->extended_response_flag != extended_response) {
3742 if (!h->legacy_board) {
3743 dev_err(&h->pdev->dev,
3744 "report luns requested format %u, got %u\n",
3746 rld->extended_response_flag);
3757 static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info *h,
3758 struct ReportExtendedLUNdata *buf, int bufsize)
3761 struct ReportLUNdata *lbuf;
3763 rc = hpsa_scsi_do_report_luns(h, 0, buf, bufsize,
3764 HPSA_REPORT_PHYS_EXTENDED);
3765 if (!rc || rc != -EOPNOTSUPP)
3768 /* REPORT PHYS EXTENDED is not supported */
3769 lbuf = kzalloc(sizeof(*lbuf), GFP_KERNEL);
3773 rc = hpsa_scsi_do_report_luns(h, 0, lbuf, sizeof(*lbuf), 0);
3778 /* Copy ReportLUNdata header */
3779 memcpy(buf, lbuf, 8);
3780 nphys = be32_to_cpu(*((__be32 *)lbuf->LUNListLength)) / 8;
3781 for (i = 0; i < nphys; i++)
3782 memcpy(buf->LUN[i].lunid, lbuf->LUN[i], 8);
3788 static inline int hpsa_scsi_do_report_log_luns(struct ctlr_info *h,
3789 struct ReportLUNdata *buf, int bufsize)
3791 return hpsa_scsi_do_report_luns(h, 1, buf, bufsize, 0);
3794 static inline void hpsa_set_bus_target_lun(struct hpsa_scsi_dev_t *device,
3795 int bus, int target, int lun)
3798 device->target = target;
3802 /* Use VPD inquiry to get details of volume status */
3803 static int hpsa_get_volume_status(struct ctlr_info *h,
3804 unsigned char scsi3addr[])
3811 buf = kzalloc(64, GFP_KERNEL);
3813 return HPSA_VPD_LV_STATUS_UNSUPPORTED;
3815 /* Does controller have VPD for logical volume status? */
3816 if (!hpsa_vpd_page_supported(h, scsi3addr, HPSA_VPD_LV_STATUS))
3819 /* Get the size of the VPD return buffer */
3820 rc = hpsa_scsi_do_inquiry(h, scsi3addr, VPD_PAGE | HPSA_VPD_LV_STATUS,
3821 buf, HPSA_VPD_HEADER_SZ);
3826 /* Now get the whole VPD buffer */
3827 rc = hpsa_scsi_do_inquiry(h, scsi3addr, VPD_PAGE | HPSA_VPD_LV_STATUS,
3828 buf, size + HPSA_VPD_HEADER_SZ);
3831 status = buf[4]; /* status byte */
3837 return HPSA_VPD_LV_STATUS_UNSUPPORTED;
3840 /* Determine offline status of a volume.
3843 * 0xff (offline for unknown reasons)
3844 * # (integer code indicating one of several NOT READY states
3845 * describing why a volume is to be kept offline)
3847 static unsigned char hpsa_volume_offline(struct ctlr_info *h,
3848 unsigned char scsi3addr[])
3850 struct CommandList *c;
3851 unsigned char *sense;
3852 u8 sense_key, asc, ascq;
3857 #define ASC_LUN_NOT_READY 0x04
3858 #define ASCQ_LUN_NOT_READY_FORMAT_IN_PROGRESS 0x04
3859 #define ASCQ_LUN_NOT_READY_INITIALIZING_CMD_REQ 0x02
3863 (void) fill_cmd(c, TEST_UNIT_READY, h, NULL, 0, 0, scsi3addr, TYPE_CMD);
3864 rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE,
3868 return HPSA_VPD_LV_STATUS_UNSUPPORTED;
3870 sense = c->err_info->SenseInfo;
3871 if (c->err_info->SenseLen > sizeof(c->err_info->SenseInfo))
3872 sense_len = sizeof(c->err_info->SenseInfo);
3874 sense_len = c->err_info->SenseLen;
3875 decode_sense_data(sense, sense_len, &sense_key, &asc, &ascq);
3876 cmd_status = c->err_info->CommandStatus;
3877 scsi_status = c->err_info->ScsiStatus;
3880 /* Determine the reason for not ready state */
3881 ldstat = hpsa_get_volume_status(h, scsi3addr);
3883 /* Keep volume offline in certain cases: */
3885 case HPSA_LV_FAILED:
3886 case HPSA_LV_UNDERGOING_ERASE:
3887 case HPSA_LV_NOT_AVAILABLE:
3888 case HPSA_LV_UNDERGOING_RPI:
3889 case HPSA_LV_PENDING_RPI:
3890 case HPSA_LV_ENCRYPTED_NO_KEY:
3891 case HPSA_LV_PLAINTEXT_IN_ENCRYPT_ONLY_CONTROLLER:
3892 case HPSA_LV_UNDERGOING_ENCRYPTION:
3893 case HPSA_LV_UNDERGOING_ENCRYPTION_REKEYING:
3894 case HPSA_LV_ENCRYPTED_IN_NON_ENCRYPTED_CONTROLLER:
3896 case HPSA_VPD_LV_STATUS_UNSUPPORTED:
3897 /* If VPD status page isn't available,
3898 * use ASC/ASCQ to determine state
3900 if ((ascq == ASCQ_LUN_NOT_READY_FORMAT_IN_PROGRESS) ||
3901 (ascq == ASCQ_LUN_NOT_READY_INITIALIZING_CMD_REQ))
3910 static int hpsa_update_device_info(struct ctlr_info *h,
3911 unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device,
3912 unsigned char *is_OBDR_device)
3915 #define OBDR_SIG_OFFSET 43
3916 #define OBDR_TAPE_SIG "$DR-10"
3917 #define OBDR_SIG_LEN (sizeof(OBDR_TAPE_SIG) - 1)
3918 #define OBDR_TAPE_INQ_SIZE (OBDR_SIG_OFFSET + OBDR_SIG_LEN)
3920 unsigned char *inq_buff;
3921 unsigned char *obdr_sig;
3924 inq_buff = kzalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
3930 /* Do an inquiry to the device to see what it is. */
3931 if (hpsa_scsi_do_inquiry(h, scsi3addr, 0, inq_buff,
3932 (unsigned char) OBDR_TAPE_INQ_SIZE) != 0) {
3933 dev_err(&h->pdev->dev,
3934 "%s: inquiry failed, device will be skipped.\n",
3936 rc = HPSA_INQUIRY_FAILED;
3940 scsi_sanitize_inquiry_string(&inq_buff[8], 8);
3941 scsi_sanitize_inquiry_string(&inq_buff[16], 16);
3943 this_device->devtype = (inq_buff[0] & 0x1f);
3944 memcpy(this_device->scsi3addr, scsi3addr, 8);
3945 memcpy(this_device->vendor, &inq_buff[8],
3946 sizeof(this_device->vendor));
3947 memcpy(this_device->model, &inq_buff[16],
3948 sizeof(this_device->model));
3949 this_device->rev = inq_buff[2];
3950 memset(this_device->device_id, 0,
3951 sizeof(this_device->device_id));
3952 if (hpsa_get_device_id(h, scsi3addr, this_device->device_id, 8,
3953 sizeof(this_device->device_id)) < 0) {
3954 dev_err(&h->pdev->dev,
3955 "hpsa%d: %s: can't get device id for [%d:%d:%d:%d]\t%s\t%.16s\n",
3957 h->scsi_host->host_no,
3958 this_device->bus, this_device->target,
3960 scsi_device_type(this_device->devtype),
3961 this_device->model);
3962 rc = HPSA_LV_FAILED;
3966 if ((this_device->devtype == TYPE_DISK ||
3967 this_device->devtype == TYPE_ZBC) &&
3968 is_logical_dev_addr_mode(scsi3addr)) {
3969 unsigned char volume_offline;
3971 hpsa_get_raid_level(h, scsi3addr, &this_device->raid_level);
3972 if (h->fw_support & MISC_FW_RAID_OFFLOAD_BASIC)
3973 hpsa_get_ioaccel_status(h, scsi3addr, this_device);
3974 volume_offline = hpsa_volume_offline(h, scsi3addr);
3975 if (volume_offline == HPSA_VPD_LV_STATUS_UNSUPPORTED &&
3978 * Legacy boards might not support volume status
3980 dev_info(&h->pdev->dev,
3981 "C0:T%d:L%d Volume status not available, assuming online.\n",
3982 this_device->target, this_device->lun);
3985 this_device->volume_offline = volume_offline;
3986 if (volume_offline == HPSA_LV_FAILED) {
3987 rc = HPSA_LV_FAILED;
3988 dev_err(&h->pdev->dev,
3989 "%s: LV failed, device will be skipped.\n",
3994 this_device->raid_level = RAID_UNKNOWN;
3995 this_device->offload_config = 0;
3996 this_device->offload_enabled = 0;
3997 this_device->offload_to_be_enabled = 0;
3998 this_device->hba_ioaccel_enabled = 0;
3999 this_device->volume_offline = 0;
4000 this_device->queue_depth = h->nr_cmds;
4003 if (this_device->external)
4004 this_device->queue_depth = EXTERNAL_QD;
4006 if (is_OBDR_device) {
4007 /* See if this is a One-Button-Disaster-Recovery device
4008 * by looking for "$DR-10" at offset 43 in inquiry data.
4010 obdr_sig = &inq_buff[OBDR_SIG_OFFSET];
4011 *is_OBDR_device = (this_device->devtype == TYPE_ROM &&
4012 strncmp(obdr_sig, OBDR_TAPE_SIG,
4013 OBDR_SIG_LEN) == 0);
4024 * Helper function to assign bus, target, lun mapping of devices.
4025 * Logical drive target and lun are assigned at this time, but
4026 * physical device lun and target assignment are deferred (assigned
4027 * in hpsa_find_target_lun, called by hpsa_scsi_add_entry.)
4029 static void figure_bus_target_lun(struct ctlr_info *h,
4030 u8 *lunaddrbytes, struct hpsa_scsi_dev_t *device)
4032 u32 lunid = get_unaligned_le32(lunaddrbytes);
4034 if (!is_logical_dev_addr_mode(lunaddrbytes)) {
4035 /* physical device, target and lun filled in later */
4036 if (is_hba_lunid(lunaddrbytes)) {
4037 int bus = HPSA_HBA_BUS;
4040 bus = HPSA_LEGACY_HBA_BUS;
4041 hpsa_set_bus_target_lun(device,
4042 bus, 0, lunid & 0x3fff);
4044 /* defer target, lun assignment for physical devices */
4045 hpsa_set_bus_target_lun(device,
4046 HPSA_PHYSICAL_DEVICE_BUS, -1, -1);
4049 /* It's a logical device */
4050 if (device->external) {
4051 hpsa_set_bus_target_lun(device,
4052 HPSA_EXTERNAL_RAID_VOLUME_BUS, (lunid >> 16) & 0x3fff,
4056 hpsa_set_bus_target_lun(device, HPSA_RAID_VOLUME_BUS,
4060 static int figure_external_status(struct ctlr_info *h, int raid_ctlr_position,
4061 int i, int nphysicals, int nlocal_logicals)
4063 /* In report logicals, local logicals are listed first,
4064 * then any externals.
4066 int logicals_start = nphysicals + (raid_ctlr_position == 0);
4068 if (i == raid_ctlr_position)
4071 if (i < logicals_start)
4074 /* i is in logicals range, but still within local logicals */
4075 if ((i - nphysicals - (raid_ctlr_position == 0)) < nlocal_logicals)
4078 return 1; /* it's an external lun */
4082 * Do CISS_REPORT_PHYS and CISS_REPORT_LOG. Data is returned in physdev,
4083 * logdev. The number of luns in physdev and logdev are returned in
4084 * *nphysicals and *nlogicals, respectively.
4085 * Returns 0 on success, -1 otherwise.
4087 static int hpsa_gather_lun_info(struct ctlr_info *h,
4088 struct ReportExtendedLUNdata *physdev, u32 *nphysicals,
4089 struct ReportLUNdata *logdev, u32 *nlogicals)
4091 if (hpsa_scsi_do_report_phys_luns(h, physdev, sizeof(*physdev))) {
4092 dev_err(&h->pdev->dev, "report physical LUNs failed.\n");
4095 *nphysicals = be32_to_cpu(*((__be32 *)physdev->LUNListLength)) / 24;
4096 if (*nphysicals > HPSA_MAX_PHYS_LUN) {
4097 dev_warn(&h->pdev->dev, "maximum physical LUNs (%d) exceeded. %d LUNs ignored.\n",
4098 HPSA_MAX_PHYS_LUN, *nphysicals - HPSA_MAX_PHYS_LUN);
4099 *nphysicals = HPSA_MAX_PHYS_LUN;
4101 if (hpsa_scsi_do_report_log_luns(h, logdev, sizeof(*logdev))) {
4102 dev_err(&h->pdev->dev, "report logical LUNs failed.\n");
4105 *nlogicals = be32_to_cpu(*((__be32 *) logdev->LUNListLength)) / 8;
4106 /* Reject Logicals in excess of our max capability. */
4107 if (*nlogicals > HPSA_MAX_LUN) {
4108 dev_warn(&h->pdev->dev,
4109 "maximum logical LUNs (%d) exceeded. "
4110 "%d LUNs ignored.\n", HPSA_MAX_LUN,
4111 *nlogicals - HPSA_MAX_LUN);
4112 *nlogicals = HPSA_MAX_LUN;
4114 if (*nlogicals + *nphysicals > HPSA_MAX_PHYS_LUN) {
4115 dev_warn(&h->pdev->dev,
4116 "maximum logical + physical LUNs (%d) exceeded. "
4117 "%d LUNs ignored.\n", HPSA_MAX_PHYS_LUN,
4118 *nphysicals + *nlogicals - HPSA_MAX_PHYS_LUN);
4119 *nlogicals = HPSA_MAX_PHYS_LUN - *nphysicals;
4124 static u8 *figure_lunaddrbytes(struct ctlr_info *h, int raid_ctlr_position,
4125 int i, int nphysicals, int nlogicals,
4126 struct ReportExtendedLUNdata *physdev_list,
4127 struct ReportLUNdata *logdev_list)
4129 /* Helper function, figure out where the LUN ID info is coming from
4130 * given index i, lists of physical and logical devices, where in
4131 * the list the raid controller is supposed to appear (first or last)
4134 int logicals_start = nphysicals + (raid_ctlr_position == 0);
4135 int last_device = nphysicals + nlogicals + (raid_ctlr_position == 0);
4137 if (i == raid_ctlr_position)
4138 return RAID_CTLR_LUNID;
4140 if (i < logicals_start)
4141 return &physdev_list->LUN[i -
4142 (raid_ctlr_position == 0)].lunid[0];
4144 if (i < last_device)
4145 return &logdev_list->LUN[i - nphysicals -
4146 (raid_ctlr_position == 0)][0];
4151 /* get physical drive ioaccel handle and queue depth */
4152 static void hpsa_get_ioaccel_drive_info(struct ctlr_info *h,
4153 struct hpsa_scsi_dev_t *dev,
4154 struct ReportExtendedLUNdata *rlep, int rle_index,
4155 struct bmic_identify_physical_device *id_phys)
4158 struct ext_report_lun_entry *rle;
4160 rle = &rlep->LUN[rle_index];
4162 dev->ioaccel_handle = rle->ioaccel_handle;
4163 if ((rle->device_flags & 0x08) && dev->ioaccel_handle)
4164 dev->hba_ioaccel_enabled = 1;
4165 memset(id_phys, 0, sizeof(*id_phys));
4166 rc = hpsa_bmic_id_physical_device(h, &rle->lunid[0],
4167 GET_BMIC_DRIVE_NUMBER(&rle->lunid[0]), id_phys,
4170 /* Reserve space for FW operations */
4171 #define DRIVE_CMDS_RESERVED_FOR_FW 2
4172 #define DRIVE_QUEUE_DEPTH 7
4174 le16_to_cpu(id_phys->current_queue_depth_limit) -
4175 DRIVE_CMDS_RESERVED_FOR_FW;
4177 dev->queue_depth = DRIVE_QUEUE_DEPTH; /* conservative */
4180 static void hpsa_get_path_info(struct hpsa_scsi_dev_t *this_device,
4181 struct ReportExtendedLUNdata *rlep, int rle_index,
4182 struct bmic_identify_physical_device *id_phys)
4184 struct ext_report_lun_entry *rle = &rlep->LUN[rle_index];
4186 if ((rle->device_flags & 0x08) && this_device->ioaccel_handle)
4187 this_device->hba_ioaccel_enabled = 1;
4189 memcpy(&this_device->active_path_index,
4190 &id_phys->active_path_number,
4191 sizeof(this_device->active_path_index));
4192 memcpy(&this_device->path_map,
4193 &id_phys->redundant_path_present_map,
4194 sizeof(this_device->path_map));
4195 memcpy(&this_device->box,
4196 &id_phys->alternate_paths_phys_box_on_port,
4197 sizeof(this_device->box));
4198 memcpy(&this_device->phys_connector,
4199 &id_phys->alternate_paths_phys_connector,
4200 sizeof(this_device->phys_connector));
4201 memcpy(&this_device->bay,
4202 &id_phys->phys_bay_in_box,
4203 sizeof(this_device->bay));
4206 /* get number of local logical disks. */
4207 static int hpsa_set_local_logical_count(struct ctlr_info *h,
4208 struct bmic_identify_controller *id_ctlr,
4214 dev_warn(&h->pdev->dev, "%s: id_ctlr buffer is NULL.\n",
4218 memset(id_ctlr, 0, sizeof(*id_ctlr));
4219 rc = hpsa_bmic_id_controller(h, id_ctlr, sizeof(*id_ctlr));
4221 if (id_ctlr->configured_logical_drive_count < 255)
4222 *nlocals = id_ctlr->configured_logical_drive_count;
4224 *nlocals = le16_to_cpu(
4225 id_ctlr->extended_logical_unit_count);
4231 static bool hpsa_is_disk_spare(struct ctlr_info *h, u8 *lunaddrbytes)
4233 struct bmic_identify_physical_device *id_phys;
4234 bool is_spare = false;
4237 id_phys = kzalloc(sizeof(*id_phys), GFP_KERNEL);
4241 rc = hpsa_bmic_id_physical_device(h,
4243 GET_BMIC_DRIVE_NUMBER(lunaddrbytes),
4244 id_phys, sizeof(*id_phys));
4246 is_spare = (id_phys->more_flags >> 6) & 0x01;
4252 #define RPL_DEV_FLAG_NON_DISK 0x1
4253 #define RPL_DEV_FLAG_UNCONFIG_DISK_REPORTING_SUPPORTED 0x2
4254 #define RPL_DEV_FLAG_UNCONFIG_DISK 0x4
4256 #define BMIC_DEVICE_TYPE_ENCLOSURE 6
4258 static bool hpsa_skip_device(struct ctlr_info *h, u8 *lunaddrbytes,
4259 struct ext_report_lun_entry *rle)
4264 if (!MASKED_DEVICE(lunaddrbytes))
4267 device_flags = rle->device_flags;
4268 device_type = rle->device_type;
4270 if (device_flags & RPL_DEV_FLAG_NON_DISK) {
4271 if (device_type == BMIC_DEVICE_TYPE_ENCLOSURE)
4276 if (!(device_flags & RPL_DEV_FLAG_UNCONFIG_DISK_REPORTING_SUPPORTED))
4279 if (device_flags & RPL_DEV_FLAG_UNCONFIG_DISK)
4283 * Spares may be spun down, we do not want to
4284 * do an Inquiry to a RAID set spare drive as
4285 * that would have them spun up, that is a
4286 * performance hit because I/O to the RAID device
4287 * stops while the spin up occurs which can take
4290 if (hpsa_is_disk_spare(h, lunaddrbytes))
4296 static void hpsa_update_scsi_devices(struct ctlr_info *h)
4298 /* the idea here is we could get notified
4299 * that some devices have changed, so we do a report
4300 * physical luns and report logical luns cmd, and adjust
4301 * our list of devices accordingly.
4303 * The scsi3addr's of devices won't change so long as the
4304 * adapter is not reset. That means we can rescan and
4305 * tell which devices we already know about, vs. new
4306 * devices, vs. disappearing devices.
4308 struct ReportExtendedLUNdata *physdev_list = NULL;
4309 struct ReportLUNdata *logdev_list = NULL;
4310 struct bmic_identify_physical_device *id_phys = NULL;
4311 struct bmic_identify_controller *id_ctlr = NULL;
4314 u32 nlocal_logicals = 0;
4315 u32 ndev_allocated = 0;
4316 struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice;
4318 int i, n_ext_target_devs, ndevs_to_allocate;
4319 int raid_ctlr_position;
4320 bool physical_device;
4321 DECLARE_BITMAP(lunzerobits, MAX_EXT_TARGETS);
4323 currentsd = kcalloc(HPSA_MAX_DEVICES, sizeof(*currentsd), GFP_KERNEL);
4324 physdev_list = kzalloc(sizeof(*physdev_list), GFP_KERNEL);
4325 logdev_list = kzalloc(sizeof(*logdev_list), GFP_KERNEL);
4326 tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL);
4327 id_phys = kzalloc(sizeof(*id_phys), GFP_KERNEL);
4328 id_ctlr = kzalloc(sizeof(*id_ctlr), GFP_KERNEL);
4330 if (!currentsd || !physdev_list || !logdev_list ||
4331 !tmpdevice || !id_phys || !id_ctlr) {
4332 dev_err(&h->pdev->dev, "out of memory\n");
4335 memset(lunzerobits, 0, sizeof(lunzerobits));
4337 h->drv_req_rescan = 0; /* cancel scheduled rescan - we're doing it. */
4339 if (hpsa_gather_lun_info(h, physdev_list, &nphysicals,
4340 logdev_list, &nlogicals)) {
4341 h->drv_req_rescan = 1;
4345 /* Set number of local logicals (non PTRAID) */
4346 if (hpsa_set_local_logical_count(h, id_ctlr, &nlocal_logicals)) {
4347 dev_warn(&h->pdev->dev,
4348 "%s: Can't determine number of local logical devices.\n",
4352 /* We might see up to the maximum number of logical and physical disks
4353 * plus external target devices, and a device for the local RAID
4356 ndevs_to_allocate = nphysicals + nlogicals + MAX_EXT_TARGETS + 1;
4358 hpsa_ext_ctrl_present(h, physdev_list);
4360 /* Allocate the per device structures */
4361 for (i = 0; i < ndevs_to_allocate; i++) {
4362 if (i >= HPSA_MAX_DEVICES) {
4363 dev_warn(&h->pdev->dev, "maximum devices (%d) exceeded."
4364 " %d devices ignored.\n", HPSA_MAX_DEVICES,
4365 ndevs_to_allocate - HPSA_MAX_DEVICES);
4369 currentsd[i] = kzalloc(sizeof(*currentsd[i]), GFP_KERNEL);
4370 if (!currentsd[i]) {
4371 h->drv_req_rescan = 1;
4377 if (is_scsi_rev_5(h))
4378 raid_ctlr_position = 0;
4380 raid_ctlr_position = nphysicals + nlogicals;
4382 /* adjust our table of devices */
4383 n_ext_target_devs = 0;
4384 for (i = 0; i < nphysicals + nlogicals + 1; i++) {
4385 u8 *lunaddrbytes, is_OBDR = 0;
4387 int phys_dev_index = i - (raid_ctlr_position == 0);
4388 bool skip_device = false;
4390 memset(tmpdevice, 0, sizeof(*tmpdevice));
4392 physical_device = i < nphysicals + (raid_ctlr_position == 0);
4394 /* Figure out where the LUN ID info is coming from */
4395 lunaddrbytes = figure_lunaddrbytes(h, raid_ctlr_position,
4396 i, nphysicals, nlogicals, physdev_list, logdev_list);
4398 /* Determine if this is a lun from an external target array */
4399 tmpdevice->external =
4400 figure_external_status(h, raid_ctlr_position, i,
4401 nphysicals, nlocal_logicals);
4404 * Skip over some devices such as a spare.
4406 if (!tmpdevice->external && physical_device) {
4407 skip_device = hpsa_skip_device(h, lunaddrbytes,
4408 &physdev_list->LUN[phys_dev_index]);
4413 /* Get device type, vendor, model, device id, raid_map */
4414 rc = hpsa_update_device_info(h, lunaddrbytes, tmpdevice,
4416 if (rc == -ENOMEM) {
4417 dev_warn(&h->pdev->dev,
4418 "Out of memory, rescan deferred.\n");
4419 h->drv_req_rescan = 1;
4423 h->drv_req_rescan = 1;
4427 figure_bus_target_lun(h, lunaddrbytes, tmpdevice);
4428 this_device = currentsd[ncurrent];
4430 *this_device = *tmpdevice;
4431 this_device->physical_device = physical_device;
4434 * Expose all devices except for physical devices that
4437 if (MASKED_DEVICE(lunaddrbytes) && this_device->physical_device)
4438 this_device->expose_device = 0;
4440 this_device->expose_device = 1;
4444 * Get the SAS address for physical devices that are exposed.
4446 if (this_device->physical_device && this_device->expose_device)
4447 hpsa_get_sas_address(h, lunaddrbytes, this_device);
4449 switch (this_device->devtype) {
4451 /* We don't *really* support actual CD-ROM devices,
4452 * just "One Button Disaster Recovery" tape drive
4453 * which temporarily pretends to be a CD-ROM drive.
4454 * So we check that the device is really an OBDR tape
4455 * device by checking for "$DR-10" in bytes 43-48 of
4463 if (this_device->physical_device) {
4464 /* The disk is in HBA mode. */
4465 /* Never use RAID mapper in HBA mode. */
4466 this_device->offload_enabled = 0;
4467 hpsa_get_ioaccel_drive_info(h, this_device,
4468 physdev_list, phys_dev_index, id_phys);
4469 hpsa_get_path_info(this_device,
4470 physdev_list, phys_dev_index, id_phys);
4475 case TYPE_MEDIUM_CHANGER:
4478 case TYPE_ENCLOSURE:
4479 if (!this_device->external)
4480 hpsa_get_enclosure_info(h, lunaddrbytes,
4481 physdev_list, phys_dev_index,
4486 /* Only present the Smartarray HBA as a RAID controller.
4487 * If it's a RAID controller other than the HBA itself
4488 * (an external RAID controller, MSA500 or similar)
4491 if (!is_hba_lunid(lunaddrbytes))
4498 if (ncurrent >= HPSA_MAX_DEVICES)
4502 if (h->sas_host == NULL) {
4505 rc = hpsa_add_sas_host(h);
4507 dev_warn(&h->pdev->dev,
4508 "Could not add sas host %d\n", rc);
4513 adjust_hpsa_scsi_table(h, currentsd, ncurrent);
4516 for (i = 0; i < ndev_allocated; i++)
4517 kfree(currentsd[i]);
4519 kfree(physdev_list);
4525 static void hpsa_set_sg_descriptor(struct SGDescriptor *desc,
4526 struct scatterlist *sg)
4528 u64 addr64 = (u64) sg_dma_address(sg);
4529 unsigned int len = sg_dma_len(sg);
4531 desc->Addr = cpu_to_le64(addr64);
4532 desc->Len = cpu_to_le32(len);
4537 * hpsa_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci
4538 * dma mapping and fills in the scatter gather entries of the
4541 static int hpsa_scatter_gather(struct ctlr_info *h,
4542 struct CommandList *cp,
4543 struct scsi_cmnd *cmd)
4545 struct scatterlist *sg;
4546 int use_sg, i, sg_limit, chained, last_sg;
4547 struct SGDescriptor *curr_sg;
4549 BUG_ON(scsi_sg_count(cmd) > h->maxsgentries);
4551 use_sg = scsi_dma_map(cmd);
4556 goto sglist_finished;
4559 * If the number of entries is greater than the max for a single list,
4560 * then we have a chained list; we will set up all but one entry in the
4561 * first list (the last entry is saved for link information);
4562 * otherwise, we don't have a chained list and we'll set up at each of
4563 * the entries in the one list.
4566 chained = use_sg > h->max_cmd_sg_entries;
4567 sg_limit = chained ? h->max_cmd_sg_entries - 1 : use_sg;
4568 last_sg = scsi_sg_count(cmd) - 1;
4569 scsi_for_each_sg(cmd, sg, sg_limit, i) {
4570 hpsa_set_sg_descriptor(curr_sg, sg);
4576 * Continue with the chained list. Set curr_sg to the chained
4577 * list. Modify the limit to the total count less the entries
4578 * we've already set up. Resume the scan at the list entry
4579 * where the previous loop left off.
4581 curr_sg = h->cmd_sg_list[cp->cmdindex];
4582 sg_limit = use_sg - sg_limit;
4583 for_each_sg(sg, sg, sg_limit, i) {
4584 hpsa_set_sg_descriptor(curr_sg, sg);
4589 /* Back the pointer up to the last entry and mark it as "last". */
4590 (curr_sg - 1)->Ext = cpu_to_le32(HPSA_SG_LAST);
4592 if (use_sg + chained > h->maxSG)
4593 h->maxSG = use_sg + chained;
4596 cp->Header.SGList = h->max_cmd_sg_entries;
4597 cp->Header.SGTotal = cpu_to_le16(use_sg + 1);
4598 if (hpsa_map_sg_chain_block(h, cp)) {
4599 scsi_dma_unmap(cmd);
4607 cp->Header.SGList = (u8) use_sg; /* no. SGs contig in this cmd */
4608 cp->Header.SGTotal = cpu_to_le16(use_sg); /* total sgs in cmd list */
4612 static inline void warn_zero_length_transfer(struct ctlr_info *h,
4613 u8 *cdb, int cdb_len,
4616 dev_warn(&h->pdev->dev,
4617 "%s: Blocking zero-length request: CDB:%*phN\n",
4618 func, cdb_len, cdb);
4621 #define IO_ACCEL_INELIGIBLE 1
4622 /* zero-length transfers trigger hardware errors. */
4623 static bool is_zero_length_transfer(u8 *cdb)
4627 /* Block zero-length transfer sizes on certain commands. */
4631 case VERIFY: /* 0x2F */
4632 case WRITE_VERIFY: /* 0x2E */
4633 block_cnt = get_unaligned_be16(&cdb[7]);
4637 case VERIFY_12: /* 0xAF */
4638 case WRITE_VERIFY_12: /* 0xAE */
4639 block_cnt = get_unaligned_be32(&cdb[6]);
4643 case VERIFY_16: /* 0x8F */
4644 block_cnt = get_unaligned_be32(&cdb[10]);
4650 return block_cnt == 0;
4653 static int fixup_ioaccel_cdb(u8 *cdb, int *cdb_len)
4659 /* Perform some CDB fixups if needed using 10 byte reads/writes only */
4667 if (*cdb_len == 6) {
4668 block = (((cdb[1] & 0x1F) << 16) |
4675 BUG_ON(*cdb_len != 12);
4676 block = get_unaligned_be32(&cdb[2]);
4677 block_cnt = get_unaligned_be32(&cdb[6]);
4679 if (block_cnt > 0xffff)
4680 return IO_ACCEL_INELIGIBLE;
4682 cdb[0] = is_write ? WRITE_10 : READ_10;
4684 cdb[2] = (u8) (block >> 24);
4685 cdb[3] = (u8) (block >> 16);
4686 cdb[4] = (u8) (block >> 8);
4687 cdb[5] = (u8) (block);
4689 cdb[7] = (u8) (block_cnt >> 8);
4690 cdb[8] = (u8) (block_cnt);
4698 static int hpsa_scsi_ioaccel1_queue_command(struct ctlr_info *h,
4699 struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len,
4700 u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk)
4702 struct scsi_cmnd *cmd = c->scsi_cmd;
4703 struct io_accel1_cmd *cp = &h->ioaccel_cmd_pool[c->cmdindex];
4705 unsigned int total_len = 0;
4706 struct scatterlist *sg;
4709 struct SGDescriptor *curr_sg;
4710 u32 control = IOACCEL1_CONTROL_SIMPLEQUEUE;
4712 /* TODO: implement chaining support */
4713 if (scsi_sg_count(cmd) > h->ioaccel_maxsg) {
4714 atomic_dec(&phys_disk->ioaccel_cmds_out);
4715 return IO_ACCEL_INELIGIBLE;
4718 BUG_ON(cmd->cmd_len > IOACCEL1_IOFLAGS_CDBLEN_MAX);
4720 if (is_zero_length_transfer(cdb)) {
4721 warn_zero_length_transfer(h, cdb, cdb_len, __func__);
4722 atomic_dec(&phys_disk->ioaccel_cmds_out);
4723 return IO_ACCEL_INELIGIBLE;
4726 if (fixup_ioaccel_cdb(cdb, &cdb_len)) {
4727 atomic_dec(&phys_disk->ioaccel_cmds_out);
4728 return IO_ACCEL_INELIGIBLE;
4731 c->cmd_type = CMD_IOACCEL1;
4733 /* Adjust the DMA address to point to the accelerated command buffer */
4734 c->busaddr = (u32) h->ioaccel_cmd_pool_dhandle +
4735 (c->cmdindex * sizeof(*cp));
4736 BUG_ON(c->busaddr & 0x0000007F);
4738 use_sg = scsi_dma_map(cmd);
4740 atomic_dec(&phys_disk->ioaccel_cmds_out);
4746 scsi_for_each_sg(cmd, sg, use_sg, i) {
4747 addr64 = (u64) sg_dma_address(sg);
4748 len = sg_dma_len(sg);
4750 curr_sg->Addr = cpu_to_le64(addr64);
4751 curr_sg->Len = cpu_to_le32(len);
4752 curr_sg->Ext = cpu_to_le32(0);
4755 (--curr_sg)->Ext = cpu_to_le32(HPSA_SG_LAST);
4757 switch (cmd->sc_data_direction) {
4759 control |= IOACCEL1_CONTROL_DATA_OUT;
4761 case DMA_FROM_DEVICE:
4762 control |= IOACCEL1_CONTROL_DATA_IN;
4765 control |= IOACCEL1_CONTROL_NODATAXFER;
4768 dev_err(&h->pdev->dev, "unknown data direction: %d\n",
4769 cmd->sc_data_direction);
4774 control |= IOACCEL1_CONTROL_NODATAXFER;
4777 c->Header.SGList = use_sg;
4778 /* Fill out the command structure to submit */
4779 cp->dev_handle = cpu_to_le16(ioaccel_handle & 0xFFFF);
4780 cp->transfer_len = cpu_to_le32(total_len);
4781 cp->io_flags = cpu_to_le16(IOACCEL1_IOFLAGS_IO_REQ |
4782 (cdb_len & IOACCEL1_IOFLAGS_CDBLEN_MASK));
4783 cp->control = cpu_to_le32(control);
4784 memcpy(cp->CDB, cdb, cdb_len);
4785 memcpy(cp->CISS_LUN, scsi3addr, 8);
4786 /* Tag was already set at init time. */
4787 enqueue_cmd_and_start_io(h, c);
4792 * Queue a command directly to a device behind the controller using the
4793 * I/O accelerator path.
4795 static int hpsa_scsi_ioaccel_direct_map(struct ctlr_info *h,
4796 struct CommandList *c)
4798 struct scsi_cmnd *cmd = c->scsi_cmd;
4799 struct hpsa_scsi_dev_t *dev = cmd->device->hostdata;
4809 return hpsa_scsi_ioaccel_queue_command(h, c, dev->ioaccel_handle,
4810 cmd->cmnd, cmd->cmd_len, dev->scsi3addr, dev);
4814 * Set encryption parameters for the ioaccel2 request
4816 static void set_encrypt_ioaccel2(struct ctlr_info *h,
4817 struct CommandList *c, struct io_accel2_cmd *cp)
4819 struct scsi_cmnd *cmd = c->scsi_cmd;
4820 struct hpsa_scsi_dev_t *dev = cmd->device->hostdata;
4821 struct raid_map_data *map = &dev->raid_map;
4824 /* Are we doing encryption on this device */
4825 if (!(le16_to_cpu(map->flags) & RAID_MAP_FLAG_ENCRYPT_ON))
4827 /* Set the data encryption key index. */
4828 cp->dekindex = map->dekindex;
4830 /* Set the encryption enable flag, encoded into direction field. */
4831 cp->direction |= IOACCEL2_DIRECTION_ENCRYPT_MASK;
4833 /* Set encryption tweak values based on logical block address
4834 * If block size is 512, tweak value is LBA.
4835 * For other block sizes, tweak is (LBA * block size)/ 512)
4837 switch (cmd->cmnd[0]) {
4838 /* Required? 6-byte cdbs eliminated by fixup_ioaccel_cdb */
4841 first_block = (((cmd->cmnd[1] & 0x1F) << 16) |
4842 (cmd->cmnd[2] << 8) |
4847 /* Required? 12-byte cdbs eliminated by fixup_ioaccel_cdb */
4850 first_block = get_unaligned_be32(&cmd->cmnd[2]);
4854 first_block = get_unaligned_be64(&cmd->cmnd[2]);
4857 dev_err(&h->pdev->dev,
4858 "ERROR: %s: size (0x%x) not supported for encryption\n",
4859 __func__, cmd->cmnd[0]);
4864 if (le32_to_cpu(map->volume_blk_size) != 512)
4865 first_block = first_block *
4866 le32_to_cpu(map->volume_blk_size)/512;
4868 cp->tweak_lower = cpu_to_le32(first_block);
4869 cp->tweak_upper = cpu_to_le32(first_block >> 32);
4872 static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
4873 struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len,
4874 u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk)
4876 struct scsi_cmnd *cmd = c->scsi_cmd;
4877 struct io_accel2_cmd *cp = &h->ioaccel2_cmd_pool[c->cmdindex];
4878 struct ioaccel2_sg_element *curr_sg;
4880 struct scatterlist *sg;
4888 if (!cmd->device->hostdata)
4891 BUG_ON(scsi_sg_count(cmd) > h->maxsgentries);
4893 if (is_zero_length_transfer(cdb)) {
4894 warn_zero_length_transfer(h, cdb, cdb_len, __func__);
4895 atomic_dec(&phys_disk->ioaccel_cmds_out);
4896 return IO_ACCEL_INELIGIBLE;
4899 if (fixup_ioaccel_cdb(cdb, &cdb_len)) {
4900 atomic_dec(&phys_disk->ioaccel_cmds_out);
4901 return IO_ACCEL_INELIGIBLE;
4904 c->cmd_type = CMD_IOACCEL2;
4905 /* Adjust the DMA address to point to the accelerated command buffer */
4906 c->busaddr = (u32) h->ioaccel2_cmd_pool_dhandle +
4907 (c->cmdindex * sizeof(*cp));
4908 BUG_ON(c->busaddr & 0x0000007F);
4910 memset(cp, 0, sizeof(*cp));
4911 cp->IU_type = IOACCEL2_IU_TYPE;
4913 use_sg = scsi_dma_map(cmd);
4915 atomic_dec(&phys_disk->ioaccel_cmds_out);
4921 if (use_sg > h->ioaccel_maxsg) {
4922 addr64 = le64_to_cpu(
4923 h->ioaccel2_cmd_sg_list[c->cmdindex]->address);
4924 curr_sg->address = cpu_to_le64(addr64);
4925 curr_sg->length = 0;
4926 curr_sg->reserved[0] = 0;
4927 curr_sg->reserved[1] = 0;
4928 curr_sg->reserved[2] = 0;
4929 curr_sg->chain_indicator = 0x80;
4931 curr_sg = h->ioaccel2_cmd_sg_list[c->cmdindex];
4933 scsi_for_each_sg(cmd, sg, use_sg, i) {
4934 addr64 = (u64) sg_dma_address(sg);
4935 len = sg_dma_len(sg);
4937 curr_sg->address = cpu_to_le64(addr64);
4938 curr_sg->length = cpu_to_le32(len);
4939 curr_sg->reserved[0] = 0;
4940 curr_sg->reserved[1] = 0;
4941 curr_sg->reserved[2] = 0;
4942 curr_sg->chain_indicator = 0;
4946 switch (cmd->sc_data_direction) {
4948 cp->direction &= ~IOACCEL2_DIRECTION_MASK;
4949 cp->direction |= IOACCEL2_DIR_DATA_OUT;
4951 case DMA_FROM_DEVICE:
4952 cp->direction &= ~IOACCEL2_DIRECTION_MASK;
4953 cp->direction |= IOACCEL2_DIR_DATA_IN;
4956 cp->direction &= ~IOACCEL2_DIRECTION_MASK;
4957 cp->direction |= IOACCEL2_DIR_NO_DATA;
4960 dev_err(&h->pdev->dev, "unknown data direction: %d\n",
4961 cmd->sc_data_direction);
4966 cp->direction &= ~IOACCEL2_DIRECTION_MASK;
4967 cp->direction |= IOACCEL2_DIR_NO_DATA;
4970 /* Set encryption parameters, if necessary */
4971 set_encrypt_ioaccel2(h, c, cp);
4973 cp->scsi_nexus = cpu_to_le32(ioaccel_handle);
4974 cp->Tag = cpu_to_le32(c->cmdindex << DIRECT_LOOKUP_SHIFT);
4975 memcpy(cp->cdb, cdb, sizeof(cp->cdb));
4977 cp->data_len = cpu_to_le32(total_len);
4978 cp->err_ptr = cpu_to_le64(c->busaddr +
4979 offsetof(struct io_accel2_cmd, error_data));
4980 cp->err_len = cpu_to_le32(sizeof(cp->error_data));
4982 /* fill in sg elements */
4983 if (use_sg > h->ioaccel_maxsg) {
4985 cp->sg[0].length = cpu_to_le32(use_sg * sizeof(cp->sg[0]));
4986 if (hpsa_map_ioaccel2_sg_chain_block(h, cp, c)) {
4987 atomic_dec(&phys_disk->ioaccel_cmds_out);
4988 scsi_dma_unmap(cmd);
4992 cp->sg_count = (u8) use_sg;
4994 if (phys_disk->in_reset) {
4995 cmd->result = DID_RESET << 16;
4999 enqueue_cmd_and_start_io(h, c);
5004 * Queue a command to the correct I/O accelerator path.
5006 static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h,
5007 struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len,
5008 u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk)
5010 if (!c->scsi_cmd->device)
5013 if (!c->scsi_cmd->device->hostdata)
5016 if (phys_disk->in_reset)
5019 /* Try to honor the device's queue depth */
5020 if (atomic_inc_return(&phys_disk->ioaccel_cmds_out) >
5021 phys_disk->queue_depth) {
5022 atomic_dec(&phys_disk->ioaccel_cmds_out);
5023 return IO_ACCEL_INELIGIBLE;
5025 if (h->transMethod & CFGTBL_Trans_io_accel1)
5026 return hpsa_scsi_ioaccel1_queue_command(h, c, ioaccel_handle,
5027 cdb, cdb_len, scsi3addr,
5030 return hpsa_scsi_ioaccel2_queue_command(h, c, ioaccel_handle,
5031 cdb, cdb_len, scsi3addr,
5035 static void raid_map_helper(struct raid_map_data *map,
5036 int offload_to_mirror, u32 *map_index, u32 *current_group)
5038 if (offload_to_mirror == 0) {
5039 /* use physical disk in the first mirrored group. */
5040 *map_index %= le16_to_cpu(map->data_disks_per_row);
5044 /* determine mirror group that *map_index indicates */
5045 *current_group = *map_index /
5046 le16_to_cpu(map->data_disks_per_row);
5047 if (offload_to_mirror == *current_group)
5049 if (*current_group < le16_to_cpu(map->layout_map_count) - 1) {
5050 /* select map index from next group */
5051 *map_index += le16_to_cpu(map->data_disks_per_row);
5054 /* select map index from first group */
5055 *map_index %= le16_to_cpu(map->data_disks_per_row);
5058 } while (offload_to_mirror != *current_group);
5062 * Attempt to perform offload RAID mapping for a logical volume I/O.
5064 static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
5065 struct CommandList *c)
5067 struct scsi_cmnd *cmd = c->scsi_cmd;
5068 struct hpsa_scsi_dev_t *dev = cmd->device->hostdata;
5069 struct raid_map_data *map = &dev->raid_map;
5070 struct raid_map_disk_data *dd = &map->data[0];
5073 u64 first_block, last_block;
5076 u64 first_row, last_row;
5077 u32 first_row_offset, last_row_offset;
5078 u32 first_column, last_column;
5079 u64 r0_first_row, r0_last_row;
5080 u32 r5or6_blocks_per_row;
5081 u64 r5or6_first_row, r5or6_last_row;
5082 u32 r5or6_first_row_offset, r5or6_last_row_offset;
5083 u32 r5or6_first_column, r5or6_last_column;
5084 u32 total_disks_per_row;
5086 u32 first_group, last_group, current_group;
5094 #if BITS_PER_LONG == 32
5097 int offload_to_mirror;
5105 /* check for valid opcode, get LBA and block count */
5106 switch (cmd->cmnd[0]) {
5111 first_block = (((cmd->cmnd[1] & 0x1F) << 16) |
5112 (cmd->cmnd[2] << 8) |
5114 block_cnt = cmd->cmnd[4];
5123 (((u64) cmd->cmnd[2]) << 24) |
5124 (((u64) cmd->cmnd[3]) << 16) |
5125 (((u64) cmd->cmnd[4]) << 8) |
5128 (((u32) cmd->cmnd[7]) << 8) |
5136 (((u64) cmd->cmnd[2]) << 24) |
5137 (((u64) cmd->cmnd[3]) << 16) |
5138 (((u64) cmd->cmnd[4]) << 8) |
5141 (((u32) cmd->cmnd[6]) << 24) |
5142 (((u32) cmd->cmnd[7]) << 16) |
5143 (((u32) cmd->cmnd[8]) << 8) |
5151 (((u64) cmd->cmnd[2]) << 56) |
5152 (((u64) cmd->cmnd[3]) << 48) |
5153 (((u64) cmd->cmnd[4]) << 40) |
5154 (((u64) cmd->cmnd[5]) << 32) |
5155 (((u64) cmd->cmnd[6]) << 24) |
5156 (((u64) cmd->cmnd[7]) << 16) |
5157 (((u64) cmd->cmnd[8]) << 8) |
5160 (((u32) cmd->cmnd[10]) << 24) |
5161 (((u32) cmd->cmnd[11]) << 16) |
5162 (((u32) cmd->cmnd[12]) << 8) |
5166 return IO_ACCEL_INELIGIBLE; /* process via normal I/O path */
5168 last_block = first_block + block_cnt - 1;
5170 /* check for write to non-RAID-0 */
5171 if (is_write && dev->raid_level != 0)
5172 return IO_ACCEL_INELIGIBLE;
5174 /* check for invalid block or wraparound */
5175 if (last_block >= le64_to_cpu(map->volume_blk_cnt) ||
5176 last_block < first_block)
5177 return IO_ACCEL_INELIGIBLE;
5179 /* calculate stripe information for the request */
5180 blocks_per_row = le16_to_cpu(map->data_disks_per_row) *
5181 le16_to_cpu(map->strip_size);
5182 strip_size = le16_to_cpu(map->strip_size);
5183 #if BITS_PER_LONG == 32
5184 tmpdiv = first_block;
5185 (void) do_div(tmpdiv, blocks_per_row);
5187 tmpdiv = last_block;
5188 (void) do_div(tmpdiv, blocks_per_row);
5190 first_row_offset = (u32) (first_block - (first_row * blocks_per_row));
5191 last_row_offset = (u32) (last_block - (last_row * blocks_per_row));
5192 tmpdiv = first_row_offset;
5193 (void) do_div(tmpdiv, strip_size);
5194 first_column = tmpdiv;
5195 tmpdiv = last_row_offset;
5196 (void) do_div(tmpdiv, strip_size);
5197 last_column = tmpdiv;
5199 first_row = first_block / blocks_per_row;
5200 last_row = last_block / blocks_per_row;
5201 first_row_offset = (u32) (first_block - (first_row * blocks_per_row));
5202 last_row_offset = (u32) (last_block - (last_row * blocks_per_row));
5203 first_column = first_row_offset / strip_size;
5204 last_column = last_row_offset / strip_size;
5207 /* if this isn't a single row/column then give to the controller */
5208 if ((first_row != last_row) || (first_column != last_column))
5209 return IO_ACCEL_INELIGIBLE;
5211 /* proceeding with driver mapping */
5212 total_disks_per_row = le16_to_cpu(map->data_disks_per_row) +
5213 le16_to_cpu(map->metadata_disks_per_row);
5214 map_row = ((u32)(first_row >> map->parity_rotation_shift)) %
5215 le16_to_cpu(map->row_cnt);
5216 map_index = (map_row * total_disks_per_row) + first_column;
5218 switch (dev->raid_level) {
5220 break; /* nothing special to do */
5222 /* Handles load balance across RAID 1 members.
5223 * (2-drive R1 and R10 with even # of drives.)
5224 * Appropriate for SSDs, not optimal for HDDs
5226 BUG_ON(le16_to_cpu(map->layout_map_count) != 2);
5227 if (dev->offload_to_mirror)
5228 map_index += le16_to_cpu(map->data_disks_per_row);
5229 dev->offload_to_mirror = !dev->offload_to_mirror;
5232 /* Handles N-way mirrors (R1-ADM)
5233 * and R10 with # of drives divisible by 3.)
5235 BUG_ON(le16_to_cpu(map->layout_map_count) != 3);
5237 offload_to_mirror = dev->offload_to_mirror;
5238 raid_map_helper(map, offload_to_mirror,
5239 &map_index, ¤t_group);
5240 /* set mirror group to use next time */
5242 (offload_to_mirror >=
5243 le16_to_cpu(map->layout_map_count) - 1)
5244 ? 0 : offload_to_mirror + 1;
5245 dev->offload_to_mirror = offload_to_mirror;
5246 /* Avoid direct use of dev->offload_to_mirror within this
5247 * function since multiple threads might simultaneously
5248 * increment it beyond the range of dev->layout_map_count -1.
5253 if (le16_to_cpu(map->layout_map_count) <= 1)
5256 /* Verify first and last block are in same RAID group */
5257 r5or6_blocks_per_row =
5258 le16_to_cpu(map->strip_size) *
5259 le16_to_cpu(map->data_disks_per_row);
5260 BUG_ON(r5or6_blocks_per_row == 0);
5261 stripesize = r5or6_blocks_per_row *
5262 le16_to_cpu(map->layout_map_count);
5263 #if BITS_PER_LONG == 32
5264 tmpdiv = first_block;
5265 first_group = do_div(tmpdiv, stripesize);
5266 tmpdiv = first_group;
5267 (void) do_div(tmpdiv, r5or6_blocks_per_row);
5268 first_group = tmpdiv;
5269 tmpdiv = last_block;
5270 last_group = do_div(tmpdiv, stripesize);
5271 tmpdiv = last_group;
5272 (void) do_div(tmpdiv, r5or6_blocks_per_row);
5273 last_group = tmpdiv;
5275 first_group = (first_block % stripesize) / r5or6_blocks_per_row;
5276 last_group = (last_block % stripesize) / r5or6_blocks_per_row;
5278 if (first_group != last_group)
5279 return IO_ACCEL_INELIGIBLE;
5281 /* Verify request is in a single row of RAID 5/6 */
5282 #if BITS_PER_LONG == 32
5283 tmpdiv = first_block;
5284 (void) do_div(tmpdiv, stripesize);
5285 first_row = r5or6_first_row = r0_first_row = tmpdiv;
5286 tmpdiv = last_block;
5287 (void) do_div(tmpdiv, stripesize);
5288 r5or6_last_row = r0_last_row = tmpdiv;
5290 first_row = r5or6_first_row = r0_first_row =
5291 first_block / stripesize;
5292 r5or6_last_row = r0_last_row = last_block / stripesize;
5294 if (r5or6_first_row != r5or6_last_row)
5295 return IO_ACCEL_INELIGIBLE;
5298 /* Verify request is in a single column */
5299 #if BITS_PER_LONG == 32
5300 tmpdiv = first_block;
5301 first_row_offset = do_div(tmpdiv, stripesize);
5302 tmpdiv = first_row_offset;
5303 first_row_offset = (u32) do_div(tmpdiv, r5or6_blocks_per_row);
5304 r5or6_first_row_offset = first_row_offset;
5305 tmpdiv = last_block;
5306 r5or6_last_row_offset = do_div(tmpdiv, stripesize);
5307 tmpdiv = r5or6_last_row_offset;
5308 r5or6_last_row_offset = do_div(tmpdiv, r5or6_blocks_per_row);
5309 tmpdiv = r5or6_first_row_offset;
5310 (void) do_div(tmpdiv, map->strip_size);
5311 first_column = r5or6_first_column = tmpdiv;
5312 tmpdiv = r5or6_last_row_offset;
5313 (void) do_div(tmpdiv, map->strip_size);
5314 r5or6_last_column = tmpdiv;
5316 first_row_offset = r5or6_first_row_offset =
5317 (u32)((first_block % stripesize) %
5318 r5or6_blocks_per_row);
5320 r5or6_last_row_offset =
5321 (u32)((last_block % stripesize) %
5322 r5or6_blocks_per_row);
5324 first_column = r5or6_first_column =
5325 r5or6_first_row_offset / le16_to_cpu(map->strip_size);
5327 r5or6_last_row_offset / le16_to_cpu(map->strip_size);
5329 if (r5or6_first_column != r5or6_last_column)
5330 return IO_ACCEL_INELIGIBLE;
5332 /* Request is eligible */
5333 map_row = ((u32)(first_row >> map->parity_rotation_shift)) %
5334 le16_to_cpu(map->row_cnt);
5336 map_index = (first_group *
5337 (le16_to_cpu(map->row_cnt) * total_disks_per_row)) +
5338 (map_row * total_disks_per_row) + first_column;
5341 return IO_ACCEL_INELIGIBLE;
5344 if (unlikely(map_index >= RAID_MAP_MAX_ENTRIES))
5345 return IO_ACCEL_INELIGIBLE;
5347 c->phys_disk = dev->phys_disk[map_index];
5349 return IO_ACCEL_INELIGIBLE;
5351 disk_handle = dd[map_index].ioaccel_handle;
5352 disk_block = le64_to_cpu(map->disk_starting_blk) +
5353 first_row * le16_to_cpu(map->strip_size) +
5354 (first_row_offset - first_column *
5355 le16_to_cpu(map->strip_size));
5356 disk_block_cnt = block_cnt;
5358 /* handle differing logical/physical block sizes */
5359 if (map->phys_blk_shift) {
5360 disk_block <<= map->phys_blk_shift;
5361 disk_block_cnt <<= map->phys_blk_shift;
5363 BUG_ON(disk_block_cnt > 0xffff);
5365 /* build the new CDB for the physical disk I/O */
5366 if (disk_block > 0xffffffff) {
5367 cdb[0] = is_write ? WRITE_16 : READ_16;
5369 cdb[2] = (u8) (disk_block >> 56);
5370 cdb[3] = (u8) (disk_block >> 48);
5371 cdb[4] = (u8) (disk_block >> 40);
5372 cdb[5] = (u8) (disk_block >> 32);
5373 cdb[6] = (u8) (disk_block >> 24);
5374 cdb[7] = (u8) (disk_block >> 16);
5375 cdb[8] = (u8) (disk_block >> 8);
5376 cdb[9] = (u8) (disk_block);
5377 cdb[10] = (u8) (disk_block_cnt >> 24);
5378 cdb[11] = (u8) (disk_block_cnt >> 16);
5379 cdb[12] = (u8) (disk_block_cnt >> 8);
5380 cdb[13] = (u8) (disk_block_cnt);
5385 cdb[0] = is_write ? WRITE_10 : READ_10;
5387 cdb[2] = (u8) (disk_block >> 24);
5388 cdb[3] = (u8) (disk_block >> 16);
5389 cdb[4] = (u8) (disk_block >> 8);
5390 cdb[5] = (u8) (disk_block);
5392 cdb[7] = (u8) (disk_block_cnt >> 8);
5393 cdb[8] = (u8) (disk_block_cnt);
5397 return hpsa_scsi_ioaccel_queue_command(h, c, disk_handle, cdb, cdb_len,
5399 dev->phys_disk[map_index]);
5403 * Submit commands down the "normal" RAID stack path
5404 * All callers to hpsa_ciss_submit must check lockup_detected
5405 * beforehand, before (opt.) and after calling cmd_alloc
5407 static int hpsa_ciss_submit(struct ctlr_info *h,
5408 struct CommandList *c, struct scsi_cmnd *cmd,
5409 struct hpsa_scsi_dev_t *dev)
5411 cmd->host_scribble = (unsigned char *) c;
5412 c->cmd_type = CMD_SCSI;
5414 c->Header.ReplyQueue = 0; /* unused in simple mode */
5415 memcpy(&c->Header.LUN.LunAddrBytes[0], &dev->scsi3addr[0], 8);
5416 c->Header.tag = cpu_to_le64((c->cmdindex << DIRECT_LOOKUP_SHIFT));
5418 /* Fill in the request block... */
5420 c->Request.Timeout = 0;
5421 BUG_ON(cmd->cmd_len > sizeof(c->Request.CDB));
5422 c->Request.CDBLen = cmd->cmd_len;
5423 memcpy(c->Request.CDB, cmd->cmnd, cmd->cmd_len);
5424 switch (cmd->sc_data_direction) {
5426 c->Request.type_attr_dir =
5427 TYPE_ATTR_DIR(TYPE_CMD, ATTR_SIMPLE, XFER_WRITE);
5429 case DMA_FROM_DEVICE:
5430 c->Request.type_attr_dir =
5431 TYPE_ATTR_DIR(TYPE_CMD, ATTR_SIMPLE, XFER_READ);
5434 c->Request.type_attr_dir =
5435 TYPE_ATTR_DIR(TYPE_CMD, ATTR_SIMPLE, XFER_NONE);
5437 case DMA_BIDIRECTIONAL:
5438 /* This can happen if a buggy application does a scsi passthru
5439 * and sets both inlen and outlen to non-zero. ( see
5440 * ../scsi/scsi_ioctl.c:scsi_ioctl_send_command() )
5443 c->Request.type_attr_dir =
5444 TYPE_ATTR_DIR(TYPE_CMD, ATTR_SIMPLE, XFER_RSVD);
5445 /* This is technically wrong, and hpsa controllers should
5446 * reject it with CMD_INVALID, which is the most correct
5447 * response, but non-fibre backends appear to let it
5448 * slide by, and give the same results as if this field
5449 * were set correctly. Either way is acceptable for
5450 * our purposes here.
5456 dev_err(&h->pdev->dev, "unknown data direction: %d\n",
5457 cmd->sc_data_direction);
5462 if (hpsa_scatter_gather(h, c, cmd) < 0) { /* Fill SG list */
5463 hpsa_cmd_resolve_and_free(h, c);
5464 return SCSI_MLQUEUE_HOST_BUSY;
5467 if (dev->in_reset) {
5468 hpsa_cmd_resolve_and_free(h, c);
5469 return SCSI_MLQUEUE_HOST_BUSY;
5472 enqueue_cmd_and_start_io(h, c);
5473 /* the cmd'll come back via intr handler in complete_scsi_command() */
5477 static void hpsa_cmd_init(struct ctlr_info *h, int index,
5478 struct CommandList *c)
5480 dma_addr_t cmd_dma_handle, err_dma_handle;
5482 /* Zero out all of commandlist except the last field, refcount */
5483 memset(c, 0, offsetof(struct CommandList, refcount));
5484 c->Header.tag = cpu_to_le64((u64) (index << DIRECT_LOOKUP_SHIFT));
5485 cmd_dma_handle = h->cmd_pool_dhandle + index * sizeof(*c);
5486 c->err_info = h->errinfo_pool + index;
5487 memset(c->err_info, 0, sizeof(*c->err_info));
5488 err_dma_handle = h->errinfo_pool_dhandle
5489 + index * sizeof(*c->err_info);
5490 c->cmdindex = index;
5491 c->busaddr = (u32) cmd_dma_handle;
5492 c->ErrDesc.Addr = cpu_to_le64((u64) err_dma_handle);
5493 c->ErrDesc.Len = cpu_to_le32((u32) sizeof(*c->err_info));
5495 c->scsi_cmd = SCSI_CMD_IDLE;
5498 static void hpsa_preinitialize_commands(struct ctlr_info *h)
5502 for (i = 0; i < h->nr_cmds; i++) {
5503 struct CommandList *c = h->cmd_pool + i;
5505 hpsa_cmd_init(h, i, c);
5506 atomic_set(&c->refcount, 0);
5510 static inline void hpsa_cmd_partial_init(struct ctlr_info *h, int index,
5511 struct CommandList *c)
5513 dma_addr_t cmd_dma_handle = h->cmd_pool_dhandle + index * sizeof(*c);
5515 BUG_ON(c->cmdindex != index);
5517 memset(c->Request.CDB, 0, sizeof(c->Request.CDB));
5518 memset(c->err_info, 0, sizeof(*c->err_info));
5519 c->busaddr = (u32) cmd_dma_handle;
5522 static int hpsa_ioaccel_submit(struct ctlr_info *h,
5523 struct CommandList *c, struct scsi_cmnd *cmd)
5525 struct hpsa_scsi_dev_t *dev = cmd->device->hostdata;
5526 int rc = IO_ACCEL_INELIGIBLE;
5529 return SCSI_MLQUEUE_HOST_BUSY;
5532 return SCSI_MLQUEUE_HOST_BUSY;
5534 if (hpsa_simple_mode)
5535 return IO_ACCEL_INELIGIBLE;
5537 cmd->host_scribble = (unsigned char *) c;
5539 if (dev->offload_enabled) {
5540 hpsa_cmd_init(h, c->cmdindex, c);
5541 c->cmd_type = CMD_SCSI;
5543 rc = hpsa_scsi_ioaccel_raid_map(h, c);
5544 if (rc < 0) /* scsi_dma_map failed. */
5545 rc = SCSI_MLQUEUE_HOST_BUSY;
5546 } else if (dev->hba_ioaccel_enabled) {
5547 hpsa_cmd_init(h, c->cmdindex, c);
5548 c->cmd_type = CMD_SCSI;
5550 rc = hpsa_scsi_ioaccel_direct_map(h, c);
5551 if (rc < 0) /* scsi_dma_map failed. */
5552 rc = SCSI_MLQUEUE_HOST_BUSY;
5557 static void hpsa_command_resubmit_worker(struct work_struct *work)
5559 struct scsi_cmnd *cmd;
5560 struct hpsa_scsi_dev_t *dev;
5561 struct CommandList *c = container_of(work, struct CommandList, work);
5564 dev = cmd->device->hostdata;
5566 cmd->result = DID_NO_CONNECT << 16;
5567 return hpsa_cmd_free_and_done(c->h, c, cmd);
5570 if (dev->in_reset) {
5571 cmd->result = DID_RESET << 16;
5572 return hpsa_cmd_free_and_done(c->h, c, cmd);
5575 if (c->cmd_type == CMD_IOACCEL2) {
5576 struct ctlr_info *h = c->h;
5577 struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex];
5580 if (c2->error_data.serv_response ==
5581 IOACCEL2_STATUS_SR_TASK_COMP_SET_FULL) {
5582 rc = hpsa_ioaccel_submit(h, c, cmd);
5585 if (rc == SCSI_MLQUEUE_HOST_BUSY) {
5587 * If we get here, it means dma mapping failed.
5588 * Try again via scsi mid layer, which will
5589 * then get SCSI_MLQUEUE_HOST_BUSY.
5591 cmd->result = DID_IMM_RETRY << 16;
5592 return hpsa_cmd_free_and_done(h, c, cmd);
5594 /* else, fall thru and resubmit down CISS path */
5597 hpsa_cmd_partial_init(c->h, c->cmdindex, c);
5598 if (hpsa_ciss_submit(c->h, c, cmd, dev)) {
5600 * If we get here, it means dma mapping failed. Try
5601 * again via scsi mid layer, which will then get
5602 * SCSI_MLQUEUE_HOST_BUSY.
5604 * hpsa_ciss_submit will have already freed c
5605 * if it encountered a dma mapping failure.
5607 cmd->result = DID_IMM_RETRY << 16;
5608 cmd->scsi_done(cmd);
5612 /* Running in struct Scsi_Host->host_lock less mode */
5613 static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
5615 struct ctlr_info *h;
5616 struct hpsa_scsi_dev_t *dev;
5617 struct CommandList *c;
5620 /* Get the ptr to our adapter structure out of cmd->host. */
5621 h = sdev_to_hba(cmd->device);
5623 BUG_ON(cmd->request->tag < 0);
5625 dev = cmd->device->hostdata;
5627 cmd->result = DID_NO_CONNECT << 16;
5628 cmd->scsi_done(cmd);
5633 cmd->result = DID_NO_CONNECT << 16;
5634 cmd->scsi_done(cmd);
5638 if (unlikely(lockup_detected(h))) {
5639 cmd->result = DID_NO_CONNECT << 16;
5640 cmd->scsi_done(cmd);
5645 return SCSI_MLQUEUE_DEVICE_BUSY;
5647 c = cmd_tagged_alloc(h, cmd);
5649 return SCSI_MLQUEUE_DEVICE_BUSY;
5652 * Call alternate submit routine for I/O accelerated commands.
5653 * Retries always go down the normal I/O path.
5655 if (likely(cmd->retries == 0 &&
5656 !blk_rq_is_passthrough(cmd->request) &&
5657 h->acciopath_status)) {
5658 rc = hpsa_ioaccel_submit(h, c, cmd);
5661 if (rc == SCSI_MLQUEUE_HOST_BUSY) {
5662 hpsa_cmd_resolve_and_free(h, c);
5663 return SCSI_MLQUEUE_HOST_BUSY;
5666 return hpsa_ciss_submit(h, c, cmd, dev);
5669 static void hpsa_scan_complete(struct ctlr_info *h)
5671 unsigned long flags;
5673 spin_lock_irqsave(&h->scan_lock, flags);
5674 h->scan_finished = 1;
5675 wake_up(&h->scan_wait_queue);
5676 spin_unlock_irqrestore(&h->scan_lock, flags);
5679 static void hpsa_scan_start(struct Scsi_Host *sh)
5681 struct ctlr_info *h = shost_to_hba(sh);
5682 unsigned long flags;
5685 * Don't let rescans be initiated on a controller known to be locked
5686 * up. If the controller locks up *during* a rescan, that thread is
5687 * probably hosed, but at least we can prevent new rescan threads from
5688 * piling up on a locked up controller.
5690 if (unlikely(lockup_detected(h)))
5691 return hpsa_scan_complete(h);
5694 * If a scan is already waiting to run, no need to add another
5696 spin_lock_irqsave(&h->scan_lock, flags);
5697 if (h->scan_waiting) {
5698 spin_unlock_irqrestore(&h->scan_lock, flags);
5702 spin_unlock_irqrestore(&h->scan_lock, flags);
5704 /* wait until any scan already in progress is finished. */
5706 spin_lock_irqsave(&h->scan_lock, flags);
5707 if (h->scan_finished)
5709 h->scan_waiting = 1;
5710 spin_unlock_irqrestore(&h->scan_lock, flags);
5711 wait_event(h->scan_wait_queue, h->scan_finished);
5712 /* Note: We don't need to worry about a race between this
5713 * thread and driver unload because the midlayer will
5714 * have incremented the reference count, so unload won't
5715 * happen if we're in here.
5718 h->scan_finished = 0; /* mark scan as in progress */
5719 h->scan_waiting = 0;
5720 spin_unlock_irqrestore(&h->scan_lock, flags);
5722 if (unlikely(lockup_detected(h)))
5723 return hpsa_scan_complete(h);
5726 * Do the scan after a reset completion
5728 spin_lock_irqsave(&h->reset_lock, flags);
5729 if (h->reset_in_progress) {
5730 h->drv_req_rescan = 1;
5731 spin_unlock_irqrestore(&h->reset_lock, flags);
5732 hpsa_scan_complete(h);
5735 spin_unlock_irqrestore(&h->reset_lock, flags);
5737 hpsa_update_scsi_devices(h);
5739 hpsa_scan_complete(h);
5742 static int hpsa_change_queue_depth(struct scsi_device *sdev, int qdepth)
5744 struct hpsa_scsi_dev_t *logical_drive = sdev->hostdata;
5751 else if (qdepth > logical_drive->queue_depth)
5752 qdepth = logical_drive->queue_depth;
5754 return scsi_change_queue_depth(sdev, qdepth);
5757 static int hpsa_scan_finished(struct Scsi_Host *sh,
5758 unsigned long elapsed_time)
5760 struct ctlr_info *h = shost_to_hba(sh);
5761 unsigned long flags;
5764 spin_lock_irqsave(&h->scan_lock, flags);
5765 finished = h->scan_finished;
5766 spin_unlock_irqrestore(&h->scan_lock, flags);
5770 static int hpsa_scsi_host_alloc(struct ctlr_info *h)
5772 struct Scsi_Host *sh;
5774 sh = scsi_host_alloc(&hpsa_driver_template, sizeof(h));
5776 dev_err(&h->pdev->dev, "scsi_host_alloc failed\n");
5783 sh->max_channel = 3;
5784 sh->max_cmd_len = MAX_COMMAND_SIZE;
5785 sh->max_lun = HPSA_MAX_LUN;
5786 sh->max_id = HPSA_MAX_LUN;
5787 sh->can_queue = h->nr_cmds - HPSA_NRESERVED_CMDS;
5788 sh->cmd_per_lun = sh->can_queue;
5789 sh->sg_tablesize = h->maxsgentries;
5790 sh->transportt = hpsa_sas_transport_template;
5791 sh->hostdata[0] = (unsigned long) h;
5792 sh->irq = pci_irq_vector(h->pdev, 0);
5793 sh->unique_id = sh->irq;
5799 static int hpsa_scsi_add_host(struct ctlr_info *h)
5803 rv = scsi_add_host(h->scsi_host, &h->pdev->dev);
5805 dev_err(&h->pdev->dev, "scsi_add_host failed\n");
5808 scsi_scan_host(h->scsi_host);
5813 * The block layer has already gone to the trouble of picking out a unique,
5814 * small-integer tag for this request. We use an offset from that value as
5815 * an index to select our command block. (The offset allows us to reserve the
5816 * low-numbered entries for our own uses.)
5818 static int hpsa_get_cmd_index(struct scsi_cmnd *scmd)
5820 int idx = scmd->request->tag;
5825 /* Offset to leave space for internal cmds. */
5826 return idx += HPSA_NRESERVED_CMDS;
5830 * Send a TEST_UNIT_READY command to the specified LUN using the specified
5831 * reply queue; returns zero if the unit is ready, and non-zero otherwise.
5833 static int hpsa_send_test_unit_ready(struct ctlr_info *h,
5834 struct CommandList *c, unsigned char lunaddr[],
5839 /* Send the Test Unit Ready, fill_cmd can't fail, no mapping */
5840 (void) fill_cmd(c, TEST_UNIT_READY, h,
5841 NULL, 0, 0, lunaddr, TYPE_CMD);
5842 rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT);
5845 /* no unmap needed here because no data xfer. */
5847 /* Check if the unit is already ready. */
5848 if (c->err_info->CommandStatus == CMD_SUCCESS)
5852 * The first command sent after reset will receive "unit attention" to
5853 * indicate that the LUN has been reset...this is actually what we're
5854 * looking for (but, success is good too).
5856 if (c->err_info->CommandStatus == CMD_TARGET_STATUS &&
5857 c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION &&
5858 (c->err_info->SenseInfo[2] == NO_SENSE ||
5859 c->err_info->SenseInfo[2] == UNIT_ATTENTION))
5866 * Wait for a TEST_UNIT_READY command to complete, retrying as necessary;
5867 * returns zero when the unit is ready, and non-zero when giving up.
5869 static int hpsa_wait_for_test_unit_ready(struct ctlr_info *h,
5870 struct CommandList *c,
5871 unsigned char lunaddr[], int reply_queue)
5875 int waittime = 1; /* seconds */
5877 /* Send test unit ready until device ready, or give up. */
5878 for (count = 0; count < HPSA_TUR_RETRY_LIMIT; count++) {
5881 * Wait for a bit. do this first, because if we send
5882 * the TUR right away, the reset will just abort it.
5884 msleep(1000 * waittime);
5886 rc = hpsa_send_test_unit_ready(h, c, lunaddr, reply_queue);
5890 /* Increase wait time with each try, up to a point. */
5891 if (waittime < HPSA_MAX_WAIT_INTERVAL_SECS)
5894 dev_warn(&h->pdev->dev,
5895 "waiting %d secs for device to become ready.\n",
5902 static int wait_for_device_to_become_ready(struct ctlr_info *h,
5903 unsigned char lunaddr[],
5910 struct CommandList *c;
5915 * If no specific reply queue was requested, then send the TUR
5916 * repeatedly, requesting a reply on each reply queue; otherwise execute
5917 * the loop exactly once using only the specified queue.
5919 if (reply_queue == DEFAULT_REPLY_QUEUE) {
5921 last_queue = h->nreply_queues - 1;
5923 first_queue = reply_queue;
5924 last_queue = reply_queue;
5927 for (rq = first_queue; rq <= last_queue; rq++) {
5928 rc = hpsa_wait_for_test_unit_ready(h, c, lunaddr, rq);
5934 dev_warn(&h->pdev->dev, "giving up on device.\n");
5936 dev_warn(&h->pdev->dev, "device is ready.\n");
5942 /* Need at least one of these error handlers to keep ../scsi/hosts.c from
5943 * complaining. Doing a host- or bus-reset can't do anything good here.
5945 static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
5949 struct ctlr_info *h;
5950 struct hpsa_scsi_dev_t *dev = NULL;
5953 unsigned long flags;
5955 /* find the controller to which the command to be aborted was sent */
5956 h = sdev_to_hba(scsicmd->device);
5957 if (h == NULL) /* paranoia */
5960 spin_lock_irqsave(&h->reset_lock, flags);
5961 h->reset_in_progress = 1;
5962 spin_unlock_irqrestore(&h->reset_lock, flags);
5964 if (lockup_detected(h)) {
5966 goto return_reset_status;
5969 dev = scsicmd->device->hostdata;
5971 dev_err(&h->pdev->dev, "%s: device lookup failed\n", __func__);
5973 goto return_reset_status;
5976 if (dev->devtype == TYPE_ENCLOSURE) {
5978 goto return_reset_status;
5981 /* if controller locked up, we can guarantee command won't complete */
5982 if (lockup_detected(h)) {
5983 snprintf(msg, sizeof(msg),
5984 "cmd %d RESET FAILED, lockup detected",
5985 hpsa_get_cmd_index(scsicmd));
5986 hpsa_show_dev_msg(KERN_WARNING, h, dev, msg);
5988 goto return_reset_status;
5991 /* this reset request might be the result of a lockup; check */
5992 if (detect_controller_lockup(h)) {
5993 snprintf(msg, sizeof(msg),
5994 "cmd %d RESET FAILED, new lockup detected",
5995 hpsa_get_cmd_index(scsicmd));
5996 hpsa_show_dev_msg(KERN_WARNING, h, dev, msg);
5998 goto return_reset_status;
6001 /* Do not attempt on controller */
6002 if (is_hba_lunid(dev->scsi3addr)) {
6004 goto return_reset_status;
6007 if (is_logical_dev_addr_mode(dev->scsi3addr))
6008 reset_type = HPSA_DEVICE_RESET_MSG;
6010 reset_type = HPSA_PHYS_TARGET_RESET;
6012 sprintf(msg, "resetting %s",
6013 reset_type == HPSA_DEVICE_RESET_MSG ? "logical " : "physical ");
6014 hpsa_show_dev_msg(KERN_WARNING, h, dev, msg);
6017 * wait to see if any commands will complete before sending reset
6019 dev->in_reset = true; /* block any new cmds from OS for this device */
6020 for (i = 0; i < 10; i++) {
6021 if (atomic_read(&dev->commands_outstanding) > 0)
6027 /* send a reset to the SCSI LUN which the command was sent to */
6028 rc = hpsa_do_reset(h, dev, reset_type, DEFAULT_REPLY_QUEUE);
6034 sprintf(msg, "reset %s %s",
6035 reset_type == HPSA_DEVICE_RESET_MSG ? "logical " : "physical ",
6036 rc == SUCCESS ? "completed successfully" : "failed");
6037 hpsa_show_dev_msg(KERN_WARNING, h, dev, msg);
6039 return_reset_status:
6040 spin_lock_irqsave(&h->reset_lock, flags);
6041 h->reset_in_progress = 0;
6043 dev->in_reset = false;
6044 spin_unlock_irqrestore(&h->reset_lock, flags);
6049 * For operations with an associated SCSI command, a command block is allocated
6050 * at init, and managed by cmd_tagged_alloc() and cmd_tagged_free() using the
6051 * block request tag as an index into a table of entries. cmd_tagged_free() is
6052 * the complement, although cmd_free() may be called instead.
6054 static struct CommandList *cmd_tagged_alloc(struct ctlr_info *h,
6055 struct scsi_cmnd *scmd)
6057 int idx = hpsa_get_cmd_index(scmd);
6058 struct CommandList *c = h->cmd_pool + idx;
6060 if (idx < HPSA_NRESERVED_CMDS || idx >= h->nr_cmds) {
6061 dev_err(&h->pdev->dev, "Bad block tag: %d not in [%d..%d]\n",
6062 idx, HPSA_NRESERVED_CMDS, h->nr_cmds - 1);
6063 /* The index value comes from the block layer, so if it's out of
6064 * bounds, it's probably not our bug.
6069 if (unlikely(!hpsa_is_cmd_idle(c))) {
6071 * We expect that the SCSI layer will hand us a unique tag
6072 * value. Thus, there should never be a collision here between
6073 * two requests...because if the selected command isn't idle
6074 * then someone is going to be very disappointed.
6076 if (idx != h->last_collision_tag) { /* Print once per tag */
6077 dev_warn(&h->pdev->dev,
6078 "%s: tag collision (tag=%d)\n", __func__, idx);
6079 if (c->scsi_cmd != NULL)
6080 scsi_print_command(c->scsi_cmd);
6082 scsi_print_command(scmd);
6083 h->last_collision_tag = idx;
6088 atomic_inc(&c->refcount);
6090 hpsa_cmd_partial_init(h, idx, c);
6094 static void cmd_tagged_free(struct ctlr_info *h, struct CommandList *c)
6097 * Release our reference to the block. We don't need to do anything
6098 * else to free it, because it is accessed by index.
6100 (void)atomic_dec(&c->refcount);
6104 * For operations that cannot sleep, a command block is allocated at init,
6105 * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track
6106 * which ones are free or in use. Lock must be held when calling this.
6107 * cmd_free() is the complement.
6108 * This function never gives up and returns NULL. If it hangs,
6109 * another thread must call cmd_free() to free some tags.
6112 static struct CommandList *cmd_alloc(struct ctlr_info *h)
6114 struct CommandList *c;
6119 * There is some *extremely* small but non-zero chance that that
6120 * multiple threads could get in here, and one thread could
6121 * be scanning through the list of bits looking for a free
6122 * one, but the free ones are always behind him, and other
6123 * threads sneak in behind him and eat them before he can
6124 * get to them, so that while there is always a free one, a
6125 * very unlucky thread might be starved anyway, never able to
6126 * beat the other threads. In reality, this happens so
6127 * infrequently as to be indistinguishable from never.
6129 * Note that we start allocating commands before the SCSI host structure
6130 * is initialized. Since the search starts at bit zero, this
6131 * all works, since we have at least one command structure available;
6132 * however, it means that the structures with the low indexes have to be
6133 * reserved for driver-initiated requests, while requests from the block
6134 * layer will use the higher indexes.
6138 i = find_next_zero_bit(h->cmd_pool_bits,
6139 HPSA_NRESERVED_CMDS,
6141 if (unlikely(i >= HPSA_NRESERVED_CMDS)) {
6145 c = h->cmd_pool + i;
6146 refcount = atomic_inc_return(&c->refcount);
6147 if (unlikely(refcount > 1)) {
6148 cmd_free(h, c); /* already in use */
6149 offset = (i + 1) % HPSA_NRESERVED_CMDS;
6152 set_bit(i & (BITS_PER_LONG - 1),
6153 h->cmd_pool_bits + (i / BITS_PER_LONG));
6154 break; /* it's ours now. */
6156 hpsa_cmd_partial_init(h, i, c);
6162 * This is the complementary operation to cmd_alloc(). Note, however, in some
6163 * corner cases it may also be used to free blocks allocated by
6164 * cmd_tagged_alloc() in which case the ref-count decrement does the trick and
6165 * the clear-bit is harmless.
6167 static void cmd_free(struct ctlr_info *h, struct CommandList *c)
6169 if (atomic_dec_and_test(&c->refcount)) {
6172 i = c - h->cmd_pool;
6173 clear_bit(i & (BITS_PER_LONG - 1),
6174 h->cmd_pool_bits + (i / BITS_PER_LONG));
6178 #ifdef CONFIG_COMPAT
6180 static int hpsa_ioctl32_passthru(struct scsi_device *dev, unsigned int cmd,
6183 IOCTL32_Command_struct __user *arg32 =
6184 (IOCTL32_Command_struct __user *) arg;
6185 IOCTL_Command_struct arg64;
6186 IOCTL_Command_struct __user *p = compat_alloc_user_space(sizeof(arg64));
6190 memset(&arg64, 0, sizeof(arg64));
6192 err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info,
6193 sizeof(arg64.LUN_info));
6194 err |= copy_from_user(&arg64.Request, &arg32->Request,
6195 sizeof(arg64.Request));
6196 err |= copy_from_user(&arg64.error_info, &arg32->error_info,
6197 sizeof(arg64.error_info));
6198 err |= get_user(arg64.buf_size, &arg32->buf_size);
6199 err |= get_user(cp, &arg32->buf);
6200 arg64.buf = compat_ptr(cp);
6201 err |= copy_to_user(p, &arg64, sizeof(arg64));
6206 err = hpsa_ioctl(dev, CCISS_PASSTHRU, p);
6209 err |= copy_in_user(&arg32->error_info, &p->error_info,
6210 sizeof(arg32->error_info));
6216 static int hpsa_ioctl32_big_passthru(struct scsi_device *dev,
6217 unsigned int cmd, void __user *arg)
6219 BIG_IOCTL32_Command_struct __user *arg32 =
6220 (BIG_IOCTL32_Command_struct __user *) arg;
6221 BIG_IOCTL_Command_struct arg64;
6222 BIG_IOCTL_Command_struct __user *p =
6223 compat_alloc_user_space(sizeof(arg64));
6227 memset(&arg64, 0, sizeof(arg64));
6229 err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info,
6230 sizeof(arg64.LUN_info));
6231 err |= copy_from_user(&arg64.Request, &arg32->Request,
6232 sizeof(arg64.Request));
6233 err |= copy_from_user(&arg64.error_info, &arg32->error_info,
6234 sizeof(arg64.error_info));
6235 err |= get_user(arg64.buf_size, &arg32->buf_size);
6236 err |= get_user(arg64.malloc_size, &arg32->malloc_size);
6237 err |= get_user(cp, &arg32->buf);
6238 arg64.buf = compat_ptr(cp);
6239 err |= copy_to_user(p, &arg64, sizeof(arg64));
6244 err = hpsa_ioctl(dev, CCISS_BIG_PASSTHRU, p);
6247 err |= copy_in_user(&arg32->error_info, &p->error_info,
6248 sizeof(arg32->error_info));
6254 static int hpsa_compat_ioctl(struct scsi_device *dev, unsigned int cmd,
6258 case CCISS_GETPCIINFO:
6259 case CCISS_GETINTINFO:
6260 case CCISS_SETINTINFO:
6261 case CCISS_GETNODENAME:
6262 case CCISS_SETNODENAME:
6263 case CCISS_GETHEARTBEAT:
6264 case CCISS_GETBUSTYPES:
6265 case CCISS_GETFIRMVER:
6266 case CCISS_GETDRIVVER:
6267 case CCISS_REVALIDVOLS:
6268 case CCISS_DEREGDISK:
6269 case CCISS_REGNEWDISK:
6271 case CCISS_RESCANDISK:
6272 case CCISS_GETLUNINFO:
6273 return hpsa_ioctl(dev, cmd, arg);
6275 case CCISS_PASSTHRU32:
6276 return hpsa_ioctl32_passthru(dev, cmd, arg);
6277 case CCISS_BIG_PASSTHRU32:
6278 return hpsa_ioctl32_big_passthru(dev, cmd, arg);
6281 return -ENOIOCTLCMD;
6286 static int hpsa_getpciinfo_ioctl(struct ctlr_info *h, void __user *argp)
6288 struct hpsa_pci_info pciinfo;
6292 pciinfo.domain = pci_domain_nr(h->pdev->bus);
6293 pciinfo.bus = h->pdev->bus->number;
6294 pciinfo.dev_fn = h->pdev->devfn;
6295 pciinfo.board_id = h->board_id;
6296 if (copy_to_user(argp, &pciinfo, sizeof(pciinfo)))
6301 static int hpsa_getdrivver_ioctl(struct ctlr_info *h, void __user *argp)
6303 DriverVer_type DriverVer;
6304 unsigned char vmaj, vmin, vsubmin;
6307 rc = sscanf(HPSA_DRIVER_VERSION, "%hhu.%hhu.%hhu",
6308 &vmaj, &vmin, &vsubmin);
6310 dev_info(&h->pdev->dev, "driver version string '%s' "
6311 "unrecognized.", HPSA_DRIVER_VERSION);
6316 DriverVer = (vmaj << 16) | (vmin << 8) | vsubmin;
6319 if (copy_to_user(argp, &DriverVer, sizeof(DriverVer_type)))
6324 static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp)
6326 IOCTL_Command_struct iocommand;
6327 struct CommandList *c;
6334 if (!capable(CAP_SYS_RAWIO))
6336 if (copy_from_user(&iocommand, argp, sizeof(iocommand)))
6338 if ((iocommand.buf_size < 1) &&
6339 (iocommand.Request.Type.Direction != XFER_NONE)) {
6342 if (iocommand.buf_size > 0) {
6343 buff = kmalloc(iocommand.buf_size, GFP_KERNEL);
6346 if (iocommand.Request.Type.Direction & XFER_WRITE) {
6347 /* Copy the data into the buffer we created */
6348 if (copy_from_user(buff, iocommand.buf,
6349 iocommand.buf_size)) {
6354 memset(buff, 0, iocommand.buf_size);
6359 /* Fill in the command type */
6360 c->cmd_type = CMD_IOCTL_PEND;
6361 c->scsi_cmd = SCSI_CMD_BUSY;
6362 /* Fill in Command Header */
6363 c->Header.ReplyQueue = 0; /* unused in simple mode */
6364 if (iocommand.buf_size > 0) { /* buffer to fill */
6365 c->Header.SGList = 1;
6366 c->Header.SGTotal = cpu_to_le16(1);
6367 } else { /* no buffers to fill */
6368 c->Header.SGList = 0;
6369 c->Header.SGTotal = cpu_to_le16(0);
6371 memcpy(&c->Header.LUN, &iocommand.LUN_info, sizeof(c->Header.LUN));
6373 /* Fill in Request block */
6374 memcpy(&c->Request, &iocommand.Request,
6375 sizeof(c->Request));
6377 /* Fill in the scatter gather information */
6378 if (iocommand.buf_size > 0) {
6379 temp64 = dma_map_single(&h->pdev->dev, buff,
6380 iocommand.buf_size, DMA_BIDIRECTIONAL);
6381 if (dma_mapping_error(&h->pdev->dev, (dma_addr_t) temp64)) {
6382 c->SG[0].Addr = cpu_to_le64(0);
6383 c->SG[0].Len = cpu_to_le32(0);
6387 c->SG[0].Addr = cpu_to_le64(temp64);
6388 c->SG[0].Len = cpu_to_le32(iocommand.buf_size);
6389 c->SG[0].Ext = cpu_to_le32(HPSA_SG_LAST); /* not chaining */
6391 rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE,
6393 if (iocommand.buf_size > 0)
6394 hpsa_pci_unmap(h->pdev, c, 1, DMA_BIDIRECTIONAL);
6395 check_ioctl_unit_attention(h, c);
6401 /* Copy the error information out */
6402 memcpy(&iocommand.error_info, c->err_info,
6403 sizeof(iocommand.error_info));
6404 if (copy_to_user(argp, &iocommand, sizeof(iocommand))) {
6408 if ((iocommand.Request.Type.Direction & XFER_READ) &&
6409 iocommand.buf_size > 0) {
6410 /* Copy the data out of the buffer we created */
6411 if (copy_to_user(iocommand.buf, buff, iocommand.buf_size)) {
6423 static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp)
6425 BIG_IOCTL_Command_struct *ioc;
6426 struct CommandList *c;
6427 unsigned char **buff = NULL;
6428 int *buff_size = NULL;
6434 BYTE __user *data_ptr;
6438 if (!capable(CAP_SYS_RAWIO))
6440 ioc = vmemdup_user(argp, sizeof(*ioc));
6442 status = PTR_ERR(ioc);
6445 if ((ioc->buf_size < 1) &&
6446 (ioc->Request.Type.Direction != XFER_NONE)) {
6450 /* Check kmalloc limits using all SGs */
6451 if (ioc->malloc_size > MAX_KMALLOC_SIZE) {
6455 if (ioc->buf_size > ioc->malloc_size * SG_ENTRIES_IN_CMD) {
6459 buff = kcalloc(SG_ENTRIES_IN_CMD, sizeof(char *), GFP_KERNEL);
6464 buff_size = kmalloc_array(SG_ENTRIES_IN_CMD, sizeof(int), GFP_KERNEL);
6469 left = ioc->buf_size;
6470 data_ptr = ioc->buf;
6472 sz = (left > ioc->malloc_size) ? ioc->malloc_size : left;
6473 buff_size[sg_used] = sz;
6474 buff[sg_used] = kmalloc(sz, GFP_KERNEL);
6475 if (buff[sg_used] == NULL) {
6479 if (ioc->Request.Type.Direction & XFER_WRITE) {
6480 if (copy_from_user(buff[sg_used], data_ptr, sz)) {
6485 memset(buff[sg_used], 0, sz);
6492 c->cmd_type = CMD_IOCTL_PEND;
6493 c->scsi_cmd = SCSI_CMD_BUSY;
6494 c->Header.ReplyQueue = 0;
6495 c->Header.SGList = (u8) sg_used;
6496 c->Header.SGTotal = cpu_to_le16(sg_used);
6497 memcpy(&c->Header.LUN, &ioc->LUN_info, sizeof(c->Header.LUN));
6498 memcpy(&c->Request, &ioc->Request, sizeof(c->Request));
6499 if (ioc->buf_size > 0) {
6501 for (i = 0; i < sg_used; i++) {
6502 temp64 = dma_map_single(&h->pdev->dev, buff[i],
6503 buff_size[i], DMA_BIDIRECTIONAL);
6504 if (dma_mapping_error(&h->pdev->dev,
6505 (dma_addr_t) temp64)) {
6506 c->SG[i].Addr = cpu_to_le64(0);
6507 c->SG[i].Len = cpu_to_le32(0);
6508 hpsa_pci_unmap(h->pdev, c, i,
6513 c->SG[i].Addr = cpu_to_le64(temp64);
6514 c->SG[i].Len = cpu_to_le32(buff_size[i]);
6515 c->SG[i].Ext = cpu_to_le32(0);
6517 c->SG[--i].Ext = cpu_to_le32(HPSA_SG_LAST);
6519 status = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE,
6522 hpsa_pci_unmap(h->pdev, c, sg_used, DMA_BIDIRECTIONAL);
6523 check_ioctl_unit_attention(h, c);
6529 /* Copy the error information out */
6530 memcpy(&ioc->error_info, c->err_info, sizeof(ioc->error_info));
6531 if (copy_to_user(argp, ioc, sizeof(*ioc))) {
6535 if ((ioc->Request.Type.Direction & XFER_READ) && ioc->buf_size > 0) {
6538 /* Copy the data out of the buffer we created */
6539 BYTE __user *ptr = ioc->buf;
6540 for (i = 0; i < sg_used; i++) {
6541 if (copy_to_user(ptr, buff[i], buff_size[i])) {
6545 ptr += buff_size[i];
6555 for (i = 0; i < sg_used; i++)
6564 static void check_ioctl_unit_attention(struct ctlr_info *h,
6565 struct CommandList *c)
6567 if (c->err_info->CommandStatus == CMD_TARGET_STATUS &&
6568 c->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION)
6569 (void) check_for_unit_attention(h, c);
6575 static int hpsa_ioctl(struct scsi_device *dev, unsigned int cmd,
6578 struct ctlr_info *h;
6579 void __user *argp = (void __user *)arg;
6582 h = sdev_to_hba(dev);
6585 case CCISS_DEREGDISK:
6586 case CCISS_REGNEWDISK:
6588 hpsa_scan_start(h->scsi_host);
6590 case CCISS_GETPCIINFO:
6591 return hpsa_getpciinfo_ioctl(h, argp);
6592 case CCISS_GETDRIVVER:
6593 return hpsa_getdrivver_ioctl(h, argp);
6594 case CCISS_PASSTHRU:
6595 if (atomic_dec_if_positive(&h->passthru_cmds_avail) < 0)
6597 rc = hpsa_passthru_ioctl(h, argp);
6598 atomic_inc(&h->passthru_cmds_avail);
6600 case CCISS_BIG_PASSTHRU:
6601 if (atomic_dec_if_positive(&h->passthru_cmds_avail) < 0)
6603 rc = hpsa_big_passthru_ioctl(h, argp);
6604 atomic_inc(&h->passthru_cmds_avail);
6611 static void hpsa_send_host_reset(struct ctlr_info *h, u8 reset_type)
6613 struct CommandList *c;
6617 /* fill_cmd can't fail here, no data buffer to map */
6618 (void) fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0,
6619 RAID_CTLR_LUNID, TYPE_MSG);
6620 c->Request.CDB[1] = reset_type; /* fill_cmd defaults to target reset */
6622 enqueue_cmd_and_start_io(h, c);
6623 /* Don't wait for completion, the reset won't complete. Don't free
6624 * the command either. This is the last command we will send before
6625 * re-initializing everything, so it doesn't matter and won't leak.
6630 static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
6631 void *buff, size_t size, u16 page_code, unsigned char *scsi3addr,
6634 enum dma_data_direction dir = DMA_NONE;
6636 c->cmd_type = CMD_IOCTL_PEND;
6637 c->scsi_cmd = SCSI_CMD_BUSY;
6638 c->Header.ReplyQueue = 0;
6639 if (buff != NULL && size > 0) {
6640 c->Header.SGList = 1;
6641 c->Header.SGTotal = cpu_to_le16(1);
6643 c->Header.SGList = 0;
6644 c->Header.SGTotal = cpu_to_le16(0);
6646 memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8);
6648 if (cmd_type == TYPE_CMD) {
6651 /* are we trying to read a vital product page */
6652 if (page_code & VPD_PAGE) {
6653 c->Request.CDB[1] = 0x01;
6654 c->Request.CDB[2] = (page_code & 0xff);
6656 c->Request.CDBLen = 6;
6657 c->Request.type_attr_dir =
6658 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
6659 c->Request.Timeout = 0;
6660 c->Request.CDB[0] = HPSA_INQUIRY;
6661 c->Request.CDB[4] = size & 0xFF;
6663 case RECEIVE_DIAGNOSTIC:
6664 c->Request.CDBLen = 6;
6665 c->Request.type_attr_dir =
6666 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
6667 c->Request.Timeout = 0;
6668 c->Request.CDB[0] = cmd;
6669 c->Request.CDB[1] = 1;
6670 c->Request.CDB[2] = 1;
6671 c->Request.CDB[3] = (size >> 8) & 0xFF;
6672 c->Request.CDB[4] = size & 0xFF;
6674 case HPSA_REPORT_LOG:
6675 case HPSA_REPORT_PHYS:
6676 /* Talking to controller so It's a physical command
6677 mode = 00 target = 0. Nothing to write.
6679 c->Request.CDBLen = 12;
6680 c->Request.type_attr_dir =
6681 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
6682 c->Request.Timeout = 0;
6683 c->Request.CDB[0] = cmd;
6684 c->Request.CDB[6] = (size >> 24) & 0xFF; /* MSB */
6685 c->Request.CDB[7] = (size >> 16) & 0xFF;
6686 c->Request.CDB[8] = (size >> 8) & 0xFF;
6687 c->Request.CDB[9] = size & 0xFF;
6689 case BMIC_SENSE_DIAG_OPTIONS:
6690 c->Request.CDBLen = 16;
6691 c->Request.type_attr_dir =
6692 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
6693 c->Request.Timeout = 0;
6694 /* Spec says this should be BMIC_WRITE */
6695 c->Request.CDB[0] = BMIC_READ;
6696 c->Request.CDB[6] = BMIC_SENSE_DIAG_OPTIONS;
6698 case BMIC_SET_DIAG_OPTIONS:
6699 c->Request.CDBLen = 16;
6700 c->Request.type_attr_dir =
6701 TYPE_ATTR_DIR(cmd_type,
6702 ATTR_SIMPLE, XFER_WRITE);
6703 c->Request.Timeout = 0;
6704 c->Request.CDB[0] = BMIC_WRITE;
6705 c->Request.CDB[6] = BMIC_SET_DIAG_OPTIONS;
6707 case HPSA_CACHE_FLUSH:
6708 c->Request.CDBLen = 12;
6709 c->Request.type_attr_dir =
6710 TYPE_ATTR_DIR(cmd_type,
6711 ATTR_SIMPLE, XFER_WRITE);
6712 c->Request.Timeout = 0;
6713 c->Request.CDB[0] = BMIC_WRITE;
6714 c->Request.CDB[6] = BMIC_CACHE_FLUSH;
6715 c->Request.CDB[7] = (size >> 8) & 0xFF;
6716 c->Request.CDB[8] = size & 0xFF;
6718 case TEST_UNIT_READY:
6719 c->Request.CDBLen = 6;
6720 c->Request.type_attr_dir =
6721 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_NONE);
6722 c->Request.Timeout = 0;
6724 case HPSA_GET_RAID_MAP:
6725 c->Request.CDBLen = 12;
6726 c->Request.type_attr_dir =
6727 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
6728 c->Request.Timeout = 0;
6729 c->Request.CDB[0] = HPSA_CISS_READ;
6730 c->Request.CDB[1] = cmd;
6731 c->Request.CDB[6] = (size >> 24) & 0xFF; /* MSB */
6732 c->Request.CDB[7] = (size >> 16) & 0xFF;
6733 c->Request.CDB[8] = (size >> 8) & 0xFF;
6734 c->Request.CDB[9] = size & 0xFF;
6736 case BMIC_SENSE_CONTROLLER_PARAMETERS:
6737 c->Request.CDBLen = 10;
6738 c->Request.type_attr_dir =
6739 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
6740 c->Request.Timeout = 0;
6741 c->Request.CDB[0] = BMIC_READ;
6742 c->Request.CDB[6] = BMIC_SENSE_CONTROLLER_PARAMETERS;
6743 c->Request.CDB[7] = (size >> 16) & 0xFF;
6744 c->Request.CDB[8] = (size >> 8) & 0xFF;
6746 case BMIC_IDENTIFY_PHYSICAL_DEVICE:
6747 c->Request.CDBLen = 10;
6748 c->Request.type_attr_dir =
6749 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
6750 c->Request.Timeout = 0;
6751 c->Request.CDB[0] = BMIC_READ;
6752 c->Request.CDB[6] = BMIC_IDENTIFY_PHYSICAL_DEVICE;
6753 c->Request.CDB[7] = (size >> 16) & 0xFF;
6754 c->Request.CDB[8] = (size >> 8) & 0XFF;
6756 case BMIC_SENSE_SUBSYSTEM_INFORMATION:
6757 c->Request.CDBLen = 10;
6758 c->Request.type_attr_dir =
6759 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
6760 c->Request.Timeout = 0;
6761 c->Request.CDB[0] = BMIC_READ;
6762 c->Request.CDB[6] = BMIC_SENSE_SUBSYSTEM_INFORMATION;
6763 c->Request.CDB[7] = (size >> 16) & 0xFF;
6764 c->Request.CDB[8] = (size >> 8) & 0XFF;
6766 case BMIC_SENSE_STORAGE_BOX_PARAMS:
6767 c->Request.CDBLen = 10;
6768 c->Request.type_attr_dir =
6769 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
6770 c->Request.Timeout = 0;
6771 c->Request.CDB[0] = BMIC_READ;
6772 c->Request.CDB[6] = BMIC_SENSE_STORAGE_BOX_PARAMS;
6773 c->Request.CDB[7] = (size >> 16) & 0xFF;
6774 c->Request.CDB[8] = (size >> 8) & 0XFF;
6776 case BMIC_IDENTIFY_CONTROLLER:
6777 c->Request.CDBLen = 10;
6778 c->Request.type_attr_dir =
6779 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
6780 c->Request.Timeout = 0;
6781 c->Request.CDB[0] = BMIC_READ;
6782 c->Request.CDB[1] = 0;
6783 c->Request.CDB[2] = 0;
6784 c->Request.CDB[3] = 0;
6785 c->Request.CDB[4] = 0;
6786 c->Request.CDB[5] = 0;
6787 c->Request.CDB[6] = BMIC_IDENTIFY_CONTROLLER;
6788 c->Request.CDB[7] = (size >> 16) & 0xFF;
6789 c->Request.CDB[8] = (size >> 8) & 0XFF;
6790 c->Request.CDB[9] = 0;
6793 dev_warn(&h->pdev->dev, "unknown command 0x%c\n", cmd);
6796 } else if (cmd_type == TYPE_MSG) {
6799 case HPSA_PHYS_TARGET_RESET:
6800 c->Request.CDBLen = 16;
6801 c->Request.type_attr_dir =
6802 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_NONE);
6803 c->Request.Timeout = 0; /* Don't time out */
6804 memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
6805 c->Request.CDB[0] = HPSA_RESET;
6806 c->Request.CDB[1] = HPSA_TARGET_RESET_TYPE;
6807 /* Physical target reset needs no control bytes 4-7*/
6808 c->Request.CDB[4] = 0x00;
6809 c->Request.CDB[5] = 0x00;
6810 c->Request.CDB[6] = 0x00;
6811 c->Request.CDB[7] = 0x00;
6813 case HPSA_DEVICE_RESET_MSG:
6814 c->Request.CDBLen = 16;
6815 c->Request.type_attr_dir =
6816 TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_NONE);
6817 c->Request.Timeout = 0; /* Don't time out */
6818 memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
6819 c->Request.CDB[0] = cmd;
6820 c->Request.CDB[1] = HPSA_RESET_TYPE_LUN;
6821 /* If bytes 4-7 are zero, it means reset the */
6823 c->Request.CDB[4] = 0x00;
6824 c->Request.CDB[5] = 0x00;
6825 c->Request.CDB[6] = 0x00;
6826 c->Request.CDB[7] = 0x00;
6829 dev_warn(&h->pdev->dev, "unknown message type %d\n",
6834 dev_warn(&h->pdev->dev, "unknown command type %d\n", cmd_type);
6838 switch (GET_DIR(c->Request.type_attr_dir)) {
6840 dir = DMA_FROM_DEVICE;
6843 dir = DMA_TO_DEVICE;
6849 dir = DMA_BIDIRECTIONAL;
6851 if (hpsa_map_one(h->pdev, c, buff, size, dir))
6857 * Map (physical) PCI mem into (virtual) kernel space
6859 static void __iomem *remap_pci_mem(ulong base, ulong size)
6861 ulong page_base = ((ulong) base) & PAGE_MASK;
6862 ulong page_offs = ((ulong) base) - page_base;
6863 void __iomem *page_remapped = ioremap_nocache(page_base,
6866 return page_remapped ? (page_remapped + page_offs) : NULL;
6869 static inline unsigned long get_next_completion(struct ctlr_info *h, u8 q)
6871 return h->access.command_completed(h, q);
6874 static inline bool interrupt_pending(struct ctlr_info *h)
6876 return h->access.intr_pending(h);
6879 static inline long interrupt_not_for_us(struct ctlr_info *h)
6881 return (h->access.intr_pending(h) == 0) ||
6882 (h->interrupts_enabled == 0);
6885 static inline int bad_tag(struct ctlr_info *h, u32 tag_index,
6888 if (unlikely(tag_index >= h->nr_cmds)) {
6889 dev_warn(&h->pdev->dev, "bad tag 0x%08x ignored.\n", raw_tag);
6895 static inline void finish_cmd(struct CommandList *c)
6897 dial_up_lockup_detection_on_fw_flash_complete(c->h, c);
6898 if (likely(c->cmd_type == CMD_IOACCEL1 || c->cmd_type == CMD_SCSI
6899 || c->cmd_type == CMD_IOACCEL2))
6900 complete_scsi_command(c);
6901 else if (c->cmd_type == CMD_IOCTL_PEND || c->cmd_type == IOACCEL2_TMF)
6902 complete(c->waiting);
6905 /* process completion of an indexed ("direct lookup") command */
6906 static inline void process_indexed_cmd(struct ctlr_info *h,
6910 struct CommandList *c;
6912 tag_index = raw_tag >> DIRECT_LOOKUP_SHIFT;
6913 if (!bad_tag(h, tag_index, raw_tag)) {
6914 c = h->cmd_pool + tag_index;
6919 /* Some controllers, like p400, will give us one interrupt
6920 * after a soft reset, even if we turned interrupts off.
6921 * Only need to check for this in the hpsa_xxx_discard_completions
6924 static int ignore_bogus_interrupt(struct ctlr_info *h)
6926 if (likely(!reset_devices))
6929 if (likely(h->interrupts_enabled))
6932 dev_info(&h->pdev->dev, "Received interrupt while interrupts disabled "
6933 "(known firmware bug.) Ignoring.\n");
6939 * Convert &h->q[x] (passed to interrupt handlers) back to h.
6940 * Relies on (h-q[x] == x) being true for x such that
6941 * 0 <= x < MAX_REPLY_QUEUES.
6943 static struct ctlr_info *queue_to_hba(u8 *queue)
6945 return container_of((queue - *queue), struct ctlr_info, q[0]);
6948 static irqreturn_t hpsa_intx_discard_completions(int irq, void *queue)
6950 struct ctlr_info *h = queue_to_hba(queue);
6951 u8 q = *(u8 *) queue;
6954 if (ignore_bogus_interrupt(h))
6957 if (interrupt_not_for_us(h))
6959 h->last_intr_timestamp = get_jiffies_64();
6960 while (interrupt_pending(h)) {
6961 raw_tag = get_next_completion(h, q);
6962 while (raw_tag != FIFO_EMPTY)
6963 raw_tag = next_command(h, q);
6968 static irqreturn_t hpsa_msix_discard_completions(int irq, void *queue)
6970 struct ctlr_info *h = queue_to_hba(queue);
6972 u8 q = *(u8 *) queue;
6974 if (ignore_bogus_interrupt(h))
6977 h->last_intr_timestamp = get_jiffies_64();
6978 raw_tag = get_next_completion(h, q);
6979 while (raw_tag != FIFO_EMPTY)
6980 raw_tag = next_command(h, q);
6984 static irqreturn_t do_hpsa_intr_intx(int irq, void *queue)
6986 struct ctlr_info *h = queue_to_hba((u8 *) queue);
6988 u8 q = *(u8 *) queue;
6990 if (interrupt_not_for_us(h))
6992 h->last_intr_timestamp = get_jiffies_64();
6993 while (interrupt_pending(h)) {
6994 raw_tag = get_next_completion(h, q);
6995 while (raw_tag != FIFO_EMPTY) {
6996 process_indexed_cmd(h, raw_tag);
6997 raw_tag = next_command(h, q);
7003 static irqreturn_t do_hpsa_intr_msi(int irq, void *queue)
7005 struct ctlr_info *h = queue_to_hba(queue);
7007 u8 q = *(u8 *) queue;
7009 h->last_intr_timestamp = get_jiffies_64();
7010 raw_tag = get_next_completion(h, q);
7011 while (raw_tag != FIFO_EMPTY) {
7012 process_indexed_cmd(h, raw_tag);
7013 raw_tag = next_command(h, q);
7018 /* Send a message CDB to the firmware. Careful, this only works
7019 * in simple mode, not performant mode due to the tag lookup.
7020 * We only ever use this immediately after a controller reset.
7022 static int hpsa_message(struct pci_dev *pdev, unsigned char opcode,
7026 struct CommandListHeader CommandHeader;
7027 struct RequestBlock Request;
7028 struct ErrDescriptor ErrorDescriptor;
7030 struct Command *cmd;
7031 static const size_t cmd_sz = sizeof(*cmd) +
7032 sizeof(cmd->ErrorDescriptor);
7036 void __iomem *vaddr;
7039 vaddr = pci_ioremap_bar(pdev, 0);
7043 /* The Inbound Post Queue only accepts 32-bit physical addresses for the
7044 * CCISS commands, so they must be allocated from the lower 4GiB of
7047 err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
7053 cmd = dma_alloc_coherent(&pdev->dev, cmd_sz, &paddr64, GFP_KERNEL);
7059 /* This must fit, because of the 32-bit consistent DMA mask. Also,
7060 * although there's no guarantee, we assume that the address is at
7061 * least 4-byte aligned (most likely, it's page-aligned).
7063 paddr32 = cpu_to_le32(paddr64);
7065 cmd->CommandHeader.ReplyQueue = 0;
7066 cmd->CommandHeader.SGList = 0;
7067 cmd->CommandHeader.SGTotal = cpu_to_le16(0);
7068 cmd->CommandHeader.tag = cpu_to_le64(paddr64);
7069 memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8);
7071 cmd->Request.CDBLen = 16;
7072 cmd->Request.type_attr_dir =
7073 TYPE_ATTR_DIR(TYPE_MSG, ATTR_HEADOFQUEUE, XFER_NONE);
7074 cmd->Request.Timeout = 0; /* Don't time out */
7075 cmd->Request.CDB[0] = opcode;
7076 cmd->Request.CDB[1] = type;
7077 memset(&cmd->Request.CDB[2], 0, 14); /* rest of the CDB is reserved */
7078 cmd->ErrorDescriptor.Addr =
7079 cpu_to_le64((le32_to_cpu(paddr32) + sizeof(*cmd)));
7080 cmd->ErrorDescriptor.Len = cpu_to_le32(sizeof(struct ErrorInfo));
7082 writel(le32_to_cpu(paddr32), vaddr + SA5_REQUEST_PORT_OFFSET);
7084 for (i = 0; i < HPSA_MSG_SEND_RETRY_LIMIT; i++) {
7085 tag = readl(vaddr + SA5_REPLY_PORT_OFFSET);
7086 if ((tag & ~HPSA_SIMPLE_ERROR_BITS) == paddr64)
7088 msleep(HPSA_MSG_SEND_RETRY_INTERVAL_MSECS);
7093 /* we leak the DMA buffer here ... no choice since the controller could
7094 * still complete the command.
7096 if (i == HPSA_MSG_SEND_RETRY_LIMIT) {
7097 dev_err(&pdev->dev, "controller message %02x:%02x timed out\n",
7102 dma_free_coherent(&pdev->dev, cmd_sz, cmd, paddr64);
7104 if (tag & HPSA_ERROR_BIT) {
7105 dev_err(&pdev->dev, "controller message %02x:%02x failed\n",
7110 dev_info(&pdev->dev, "controller message %02x:%02x succeeded\n",
7115 #define hpsa_noop(p) hpsa_message(p, 3, 0)
7117 static int hpsa_controller_hard_reset(struct pci_dev *pdev,
7118 void __iomem *vaddr, u32 use_doorbell)
7122 /* For everything after the P600, the PCI power state method
7123 * of resetting the controller doesn't work, so we have this
7124 * other way using the doorbell register.
7126 dev_info(&pdev->dev, "using doorbell to reset controller\n");
7127 writel(use_doorbell, vaddr + SA5_DOORBELL);
7129 /* PMC hardware guys tell us we need a 10 second delay after
7130 * doorbell reset and before any attempt to talk to the board
7131 * at all to ensure that this actually works and doesn't fall
7132 * over in some weird corner cases.
7135 } else { /* Try to do it the PCI power state way */
7137 /* Quoting from the Open CISS Specification: "The Power
7138 * Management Control/Status Register (CSR) controls the power
7139 * state of the device. The normal operating state is D0,
7140 * CSR=00h. The software off state is D3, CSR=03h. To reset
7141 * the controller, place the interface device in D3 then to D0,
7142 * this causes a secondary PCI reset which will reset the
7147 dev_info(&pdev->dev, "using PCI PM to reset controller\n");
7149 /* enter the D3hot power management state */
7150 rc = pci_set_power_state(pdev, PCI_D3hot);
7156 /* enter the D0 power management state */
7157 rc = pci_set_power_state(pdev, PCI_D0);
7162 * The P600 requires a small delay when changing states.
7163 * Otherwise we may think the board did not reset and we bail.
7164 * This for kdump only and is particular to the P600.
7171 static void init_driver_version(char *driver_version, int len)
7173 memset(driver_version, 0, len);
7174 strncpy(driver_version, HPSA " " HPSA_DRIVER_VERSION, len - 1);
7177 static int write_driver_ver_to_cfgtable(struct CfgTable __iomem *cfgtable)
7179 char *driver_version;
7180 int i, size = sizeof(cfgtable->driver_version);
7182 driver_version = kmalloc(size, GFP_KERNEL);
7183 if (!driver_version)
7186 init_driver_version(driver_version, size);
7187 for (i = 0; i < size; i++)
7188 writeb(driver_version[i], &cfgtable->driver_version[i]);
7189 kfree(driver_version);
7193 static void read_driver_ver_from_cfgtable(struct CfgTable __iomem *cfgtable,
7194 unsigned char *driver_ver)
7198 for (i = 0; i < sizeof(cfgtable->driver_version); i++)
7199 driver_ver[i] = readb(&cfgtable->driver_version[i]);
7202 static int controller_reset_failed(struct CfgTable __iomem *cfgtable)
7205 char *driver_ver, *old_driver_ver;
7206 int rc, size = sizeof(cfgtable->driver_version);
7208 old_driver_ver = kmalloc_array(2, size, GFP_KERNEL);
7209 if (!old_driver_ver)
7211 driver_ver = old_driver_ver + size;
7213 /* After a reset, the 32 bytes of "driver version" in the cfgtable
7214 * should have been changed, otherwise we know the reset failed.
7216 init_driver_version(old_driver_ver, size);
7217 read_driver_ver_from_cfgtable(cfgtable, driver_ver);
7218 rc = !memcmp(driver_ver, old_driver_ver, size);
7219 kfree(old_driver_ver);
7222 /* This does a hard reset of the controller using PCI power management
7223 * states or the using the doorbell register.
7225 static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev, u32 board_id)
7229 u64 cfg_base_addr_index;
7230 void __iomem *vaddr;
7231 unsigned long paddr;
7232 u32 misc_fw_support;
7234 struct CfgTable __iomem *cfgtable;
7236 u16 command_register;
7238 /* For controllers as old as the P600, this is very nearly
7241 * pci_save_state(pci_dev);
7242 * pci_set_power_state(pci_dev, PCI_D3hot);
7243 * pci_set_power_state(pci_dev, PCI_D0);
7244 * pci_restore_state(pci_dev);
7246 * For controllers newer than the P600, the pci power state
7247 * method of resetting doesn't work so we have another way
7248 * using the doorbell register.
7251 if (!ctlr_is_resettable(board_id)) {
7252 dev_warn(&pdev->dev, "Controller not resettable\n");
7256 /* if controller is soft- but not hard resettable... */
7257 if (!ctlr_is_hard_resettable(board_id))
7258 return -ENOTSUPP; /* try soft reset later. */
7260 /* Save the PCI command register */
7261 pci_read_config_word(pdev, 4, &command_register);
7262 pci_save_state(pdev);
7264 /* find the first memory BAR, so we can find the cfg table */
7265 rc = hpsa_pci_find_memory_BAR(pdev, &paddr);
7268 vaddr = remap_pci_mem(paddr, 0x250);
7272 /* find cfgtable in order to check if reset via doorbell is supported */
7273 rc = hpsa_find_cfg_addrs(pdev, vaddr, &cfg_base_addr,
7274 &cfg_base_addr_index, &cfg_offset);
7277 cfgtable = remap_pci_mem(pci_resource_start(pdev,
7278 cfg_base_addr_index) + cfg_offset, sizeof(*cfgtable));
7283 rc = write_driver_ver_to_cfgtable(cfgtable);
7285 goto unmap_cfgtable;
7287 /* If reset via doorbell register is supported, use that.
7288 * There are two such methods. Favor the newest method.
7290 misc_fw_support = readl(&cfgtable->misc_fw_support);
7291 use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET2;
7293 use_doorbell = DOORBELL_CTLR_RESET2;
7295 use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET;
7297 dev_warn(&pdev->dev,
7298 "Soft reset not supported. Firmware update is required.\n");
7299 rc = -ENOTSUPP; /* try soft reset */
7300 goto unmap_cfgtable;
7304 rc = hpsa_controller_hard_reset(pdev, vaddr, use_doorbell);
7306 goto unmap_cfgtable;
7308 pci_restore_state(pdev);
7309 pci_write_config_word(pdev, 4, command_register);
7311 /* Some devices (notably the HP Smart Array 5i Controller)
7312 need a little pause here */
7313 msleep(HPSA_POST_RESET_PAUSE_MSECS);
7315 rc = hpsa_wait_for_board_state(pdev, vaddr, BOARD_READY);
7317 dev_warn(&pdev->dev,
7318 "Failed waiting for board to become ready after hard reset\n");
7319 goto unmap_cfgtable;
7322 rc = controller_reset_failed(vaddr);
7324 goto unmap_cfgtable;
7326 dev_warn(&pdev->dev, "Unable to successfully reset "
7327 "controller. Will try soft reset.\n");
7330 dev_info(&pdev->dev, "board ready after hard reset.\n");
7342 * We cannot read the structure directly, for portability we must use
7344 * This is for debug only.
7346 static void print_cfg_table(struct device *dev, struct CfgTable __iomem *tb)
7352 dev_info(dev, "Controller Configuration information\n");
7353 dev_info(dev, "------------------------------------\n");
7354 for (i = 0; i < 4; i++)
7355 temp_name[i] = readb(&(tb->Signature[i]));
7356 temp_name[4] = '\0';
7357 dev_info(dev, " Signature = %s\n", temp_name);
7358 dev_info(dev, " Spec Number = %d\n", readl(&(tb->SpecValence)));
7359 dev_info(dev, " Transport methods supported = 0x%x\n",
7360 readl(&(tb->TransportSupport)));
7361 dev_info(dev, " Transport methods active = 0x%x\n",
7362 readl(&(tb->TransportActive)));
7363 dev_info(dev, " Requested transport Method = 0x%x\n",
7364 readl(&(tb->HostWrite.TransportRequest)));
7365 dev_info(dev, " Coalesce Interrupt Delay = 0x%x\n",
7366 readl(&(tb->HostWrite.CoalIntDelay)));
7367 dev_info(dev, " Coalesce Interrupt Count = 0x%x\n",
7368 readl(&(tb->HostWrite.CoalIntCount)));
7369 dev_info(dev, " Max outstanding commands = %d\n",
7370 readl(&(tb->CmdsOutMax)));
7371 dev_info(dev, " Bus Types = 0x%x\n", readl(&(tb->BusTypes)));
7372 for (i = 0; i < 16; i++)
7373 temp_name[i] = readb(&(tb->ServerName[i]));
7374 temp_name[16] = '\0';
7375 dev_info(dev, " Server Name = %s\n", temp_name);
7376 dev_info(dev, " Heartbeat Counter = 0x%x\n\n\n",
7377 readl(&(tb->HeartBeat)));
7378 #endif /* HPSA_DEBUG */
7381 static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr)
7383 int i, offset, mem_type, bar_type;
7385 if (pci_bar_addr == PCI_BASE_ADDRESS_0) /* looking for BAR zero? */
7388 for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
7389 bar_type = pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE;
7390 if (bar_type == PCI_BASE_ADDRESS_SPACE_IO)
7393 mem_type = pci_resource_flags(pdev, i) &
7394 PCI_BASE_ADDRESS_MEM_TYPE_MASK;
7396 case PCI_BASE_ADDRESS_MEM_TYPE_32:
7397 case PCI_BASE_ADDRESS_MEM_TYPE_1M:
7398 offset += 4; /* 32 bit */
7400 case PCI_BASE_ADDRESS_MEM_TYPE_64:
7403 default: /* reserved in PCI 2.2 */
7404 dev_warn(&pdev->dev,
7405 "base address is invalid\n");
7410 if (offset == pci_bar_addr - PCI_BASE_ADDRESS_0)
7416 static void hpsa_disable_interrupt_mode(struct ctlr_info *h)
7418 pci_free_irq_vectors(h->pdev);
7419 h->msix_vectors = 0;
7422 static void hpsa_setup_reply_map(struct ctlr_info *h)
7424 const struct cpumask *mask;
7425 unsigned int queue, cpu;
7427 for (queue = 0; queue < h->msix_vectors; queue++) {
7428 mask = pci_irq_get_affinity(h->pdev, queue);
7432 for_each_cpu(cpu, mask)
7433 h->reply_map[cpu] = queue;
7438 for_each_possible_cpu(cpu)
7439 h->reply_map[cpu] = 0;
7442 /* If MSI/MSI-X is supported by the kernel we will try to enable it on
7443 * controllers that are capable. If not, we use legacy INTx mode.
7445 static int hpsa_interrupt_mode(struct ctlr_info *h)
7447 unsigned int flags = PCI_IRQ_LEGACY;
7450 /* Some boards advertise MSI but don't really support it */
7451 switch (h->board_id) {
7458 ret = pci_alloc_irq_vectors(h->pdev, 1, MAX_REPLY_QUEUES,
7459 PCI_IRQ_MSIX | PCI_IRQ_AFFINITY);
7461 h->msix_vectors = ret;
7465 flags |= PCI_IRQ_MSI;
7469 ret = pci_alloc_irq_vectors(h->pdev, 1, 1, flags);
7475 static int hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id,
7479 u32 subsystem_vendor_id, subsystem_device_id;
7481 subsystem_vendor_id = pdev->subsystem_vendor;
7482 subsystem_device_id = pdev->subsystem_device;
7483 *board_id = ((subsystem_device_id << 16) & 0xffff0000) |
7484 subsystem_vendor_id;
7487 *legacy_board = false;
7488 for (i = 0; i < ARRAY_SIZE(products); i++)
7489 if (*board_id == products[i].board_id) {
7490 if (products[i].access != &SA5A_access &&
7491 products[i].access != &SA5B_access)
7493 dev_warn(&pdev->dev,
7494 "legacy board ID: 0x%08x\n",
7497 *legacy_board = true;
7501 dev_warn(&pdev->dev, "unrecognized board ID: 0x%08x\n", *board_id);
7503 *legacy_board = true;
7504 return ARRAY_SIZE(products) - 1; /* generic unknown smart array */
7507 static int hpsa_pci_find_memory_BAR(struct pci_dev *pdev,
7508 unsigned long *memory_bar)
7512 for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
7513 if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) {
7514 /* addressing mode bits already removed */
7515 *memory_bar = pci_resource_start(pdev, i);
7516 dev_dbg(&pdev->dev, "memory BAR = %lx\n",
7520 dev_warn(&pdev->dev, "no memory BAR found\n");
7524 static int hpsa_wait_for_board_state(struct pci_dev *pdev, void __iomem *vaddr,
7530 iterations = HPSA_BOARD_READY_ITERATIONS;
7532 iterations = HPSA_BOARD_NOT_READY_ITERATIONS;
7534 for (i = 0; i < iterations; i++) {
7535 scratchpad = readl(vaddr + SA5_SCRATCHPAD_OFFSET);
7536 if (wait_for_ready) {
7537 if (scratchpad == HPSA_FIRMWARE_READY)
7540 if (scratchpad != HPSA_FIRMWARE_READY)
7543 msleep(HPSA_BOARD_READY_POLL_INTERVAL_MSECS);
7545 dev_warn(&pdev->dev, "board not ready, timed out.\n");
7549 static int hpsa_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr,
7550 u32 *cfg_base_addr, u64 *cfg_base_addr_index,
7553 *cfg_base_addr = readl(vaddr + SA5_CTCFG_OFFSET);
7554 *cfg_offset = readl(vaddr + SA5_CTMEM_OFFSET);
7555 *cfg_base_addr &= (u32) 0x0000ffff;
7556 *cfg_base_addr_index = find_PCI_BAR_index(pdev, *cfg_base_addr);
7557 if (*cfg_base_addr_index == -1) {
7558 dev_warn(&pdev->dev, "cannot find cfg_base_addr_index\n");
7564 static void hpsa_free_cfgtables(struct ctlr_info *h)
7566 if (h->transtable) {
7567 iounmap(h->transtable);
7568 h->transtable = NULL;
7571 iounmap(h->cfgtable);
7576 /* Find and map CISS config table and transfer table
7577 + * several items must be unmapped (freed) later
7579 static int hpsa_find_cfgtables(struct ctlr_info *h)
7583 u64 cfg_base_addr_index;
7587 rc = hpsa_find_cfg_addrs(h->pdev, h->vaddr, &cfg_base_addr,
7588 &cfg_base_addr_index, &cfg_offset);
7591 h->cfgtable = remap_pci_mem(pci_resource_start(h->pdev,
7592 cfg_base_addr_index) + cfg_offset, sizeof(*h->cfgtable));
7594 dev_err(&h->pdev->dev, "Failed mapping cfgtable\n");
7597 rc = write_driver_ver_to_cfgtable(h->cfgtable);
7600 /* Find performant mode table. */
7601 trans_offset = readl(&h->cfgtable->TransMethodOffset);
7602 h->transtable = remap_pci_mem(pci_resource_start(h->pdev,
7603 cfg_base_addr_index)+cfg_offset+trans_offset,
7604 sizeof(*h->transtable));
7605 if (!h->transtable) {
7606 dev_err(&h->pdev->dev, "Failed mapping transfer table\n");
7607 hpsa_free_cfgtables(h);
7613 static void hpsa_get_max_perf_mode_cmds(struct ctlr_info *h)
7615 #define MIN_MAX_COMMANDS 16
7616 BUILD_BUG_ON(MIN_MAX_COMMANDS <= HPSA_NRESERVED_CMDS);
7618 h->max_commands = readl(&h->cfgtable->MaxPerformantModeCommands);
7620 /* Limit commands in memory limited kdump scenario. */
7621 if (reset_devices && h->max_commands > 32)
7622 h->max_commands = 32;
7624 if (h->max_commands < MIN_MAX_COMMANDS) {
7625 dev_warn(&h->pdev->dev,
7626 "Controller reports max supported commands of %d Using %d instead. Ensure that firmware is up to date.\n",
7629 h->max_commands = MIN_MAX_COMMANDS;
7633 /* If the controller reports that the total max sg entries is greater than 512,
7634 * then we know that chained SG blocks work. (Original smart arrays did not
7635 * support chained SG blocks and would return zero for max sg entries.)
7637 static int hpsa_supports_chained_sg_blocks(struct ctlr_info *h)
7639 return h->maxsgentries > 512;
7642 /* Interrogate the hardware for some limits:
7643 * max commands, max SG elements without chaining, and with chaining,
7644 * SG chain block size, etc.
7646 static void hpsa_find_board_params(struct ctlr_info *h)
7648 hpsa_get_max_perf_mode_cmds(h);
7649 h->nr_cmds = h->max_commands;
7650 h->maxsgentries = readl(&(h->cfgtable->MaxScatterGatherElements));
7651 h->fw_support = readl(&(h->cfgtable->misc_fw_support));
7652 if (hpsa_supports_chained_sg_blocks(h)) {
7653 /* Limit in-command s/g elements to 32 save dma'able memory. */
7654 h->max_cmd_sg_entries = 32;
7655 h->chainsize = h->maxsgentries - h->max_cmd_sg_entries;
7656 h->maxsgentries--; /* save one for chain pointer */
7659 * Original smart arrays supported at most 31 s/g entries
7660 * embedded inline in the command (trying to use more
7661 * would lock up the controller)
7663 h->max_cmd_sg_entries = 31;
7664 h->maxsgentries = 31; /* default to traditional values */
7668 /* Find out what task management functions are supported and cache */
7669 h->TMFSupportFlags = readl(&(h->cfgtable->TMFSupportFlags));
7670 if (!(HPSATMF_PHYS_TASK_ABORT & h->TMFSupportFlags))
7671 dev_warn(&h->pdev->dev, "Physical aborts not supported\n");
7672 if (!(HPSATMF_LOG_TASK_ABORT & h->TMFSupportFlags))
7673 dev_warn(&h->pdev->dev, "Logical aborts not supported\n");
7674 if (!(HPSATMF_IOACCEL_ENABLED & h->TMFSupportFlags))
7675 dev_warn(&h->pdev->dev, "HP SSD Smart Path aborts not supported\n");
7678 static inline bool hpsa_CISS_signature_present(struct ctlr_info *h)
7680 if (!check_signature(h->cfgtable->Signature, "CISS", 4)) {
7681 dev_err(&h->pdev->dev, "not a valid CISS config table\n");
7687 static inline void hpsa_set_driver_support_bits(struct ctlr_info *h)
7691 driver_support = readl(&(h->cfgtable->driver_support));
7692 /* Need to enable prefetch in the SCSI core for 6400 in x86 */
7694 driver_support |= ENABLE_SCSI_PREFETCH;
7696 driver_support |= ENABLE_UNIT_ATTN;
7697 writel(driver_support, &(h->cfgtable->driver_support));
7700 /* Disable DMA prefetch for the P600. Otherwise an ASIC bug may result
7701 * in a prefetch beyond physical memory.
7703 static inline void hpsa_p600_dma_prefetch_quirk(struct ctlr_info *h)
7707 if (h->board_id != 0x3225103C)
7709 dma_prefetch = readl(h->vaddr + I2O_DMA1_CFG);
7710 dma_prefetch |= 0x8000;
7711 writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG);
7714 static int hpsa_wait_for_clear_event_notify_ack(struct ctlr_info *h)
7718 unsigned long flags;
7719 /* wait until the clear_event_notify bit 6 is cleared by controller. */
7720 for (i = 0; i < MAX_CLEAR_EVENT_WAIT; i++) {
7721 spin_lock_irqsave(&h->lock, flags);
7722 doorbell_value = readl(h->vaddr + SA5_DOORBELL);
7723 spin_unlock_irqrestore(&h->lock, flags);
7724 if (!(doorbell_value & DOORBELL_CLEAR_EVENTS))
7726 /* delay and try again */
7727 msleep(CLEAR_EVENT_WAIT_INTERVAL);
7734 static int hpsa_wait_for_mode_change_ack(struct ctlr_info *h)
7738 unsigned long flags;
7740 /* under certain very rare conditions, this can take awhile.
7741 * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
7742 * as we enter this code.)
7744 for (i = 0; i < MAX_MODE_CHANGE_WAIT; i++) {
7745 if (h->remove_in_progress)
7747 spin_lock_irqsave(&h->lock, flags);
7748 doorbell_value = readl(h->vaddr + SA5_DOORBELL);
7749 spin_unlock_irqrestore(&h->lock, flags);
7750 if (!(doorbell_value & CFGTBL_ChangeReq))
7752 /* delay and try again */
7753 msleep(MODE_CHANGE_WAIT_INTERVAL);
7760 /* return -ENODEV or other reason on error, 0 on success */
7761 static int hpsa_enter_simple_mode(struct ctlr_info *h)
7765 trans_support = readl(&(h->cfgtable->TransportSupport));
7766 if (!(trans_support & SIMPLE_MODE))
7769 h->max_commands = readl(&(h->cfgtable->CmdsOutMax));
7771 /* Update the field, and then ring the doorbell */
7772 writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest));
7773 writel(0, &h->cfgtable->HostWrite.command_pool_addr_hi);
7774 writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
7775 if (hpsa_wait_for_mode_change_ack(h))
7777 print_cfg_table(&h->pdev->dev, h->cfgtable);
7778 if (!(readl(&(h->cfgtable->TransportActive)) & CFGTBL_Trans_Simple))
7780 h->transMethod = CFGTBL_Trans_Simple;
7783 dev_err(&h->pdev->dev, "failed to enter simple mode\n");
7787 /* free items allocated or mapped by hpsa_pci_init */
7788 static void hpsa_free_pci_init(struct ctlr_info *h)
7790 hpsa_free_cfgtables(h); /* pci_init 4 */
7791 iounmap(h->vaddr); /* pci_init 3 */
7793 hpsa_disable_interrupt_mode(h); /* pci_init 2 */
7795 * call pci_disable_device before pci_release_regions per
7796 * Documentation/PCI/pci.txt
7798 pci_disable_device(h->pdev); /* pci_init 1 */
7799 pci_release_regions(h->pdev); /* pci_init 2 */
7802 /* several items must be freed later */
7803 static int hpsa_pci_init(struct ctlr_info *h)
7805 int prod_index, err;
7808 prod_index = hpsa_lookup_board_id(h->pdev, &h->board_id, &legacy_board);
7811 h->product_name = products[prod_index].product_name;
7812 h->access = *(products[prod_index].access);
7813 h->legacy_board = legacy_board;
7814 pci_disable_link_state(h->pdev, PCIE_LINK_STATE_L0S |
7815 PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM);
7817 err = pci_enable_device(h->pdev);
7819 dev_err(&h->pdev->dev, "failed to enable PCI device\n");
7820 pci_disable_device(h->pdev);
7824 err = pci_request_regions(h->pdev, HPSA);
7826 dev_err(&h->pdev->dev,
7827 "failed to obtain PCI resources\n");
7828 pci_disable_device(h->pdev);
7832 pci_set_master(h->pdev);
7834 err = hpsa_interrupt_mode(h);
7838 /* setup mapping between CPU and reply queue */
7839 hpsa_setup_reply_map(h);
7841 err = hpsa_pci_find_memory_BAR(h->pdev, &h->paddr);
7843 goto clean2; /* intmode+region, pci */
7844 h->vaddr = remap_pci_mem(h->paddr, 0x250);
7846 dev_err(&h->pdev->dev, "failed to remap PCI mem\n");
7848 goto clean2; /* intmode+region, pci */
7850 err = hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY);
7852 goto clean3; /* vaddr, intmode+region, pci */
7853 err = hpsa_find_cfgtables(h);
7855 goto clean3; /* vaddr, intmode+region, pci */
7856 hpsa_find_board_params(h);
7858 if (!hpsa_CISS_signature_present(h)) {
7860 goto clean4; /* cfgtables, vaddr, intmode+region, pci */
7862 hpsa_set_driver_support_bits(h);
7863 hpsa_p600_dma_prefetch_quirk(h);
7864 err = hpsa_enter_simple_mode(h);
7866 goto clean4; /* cfgtables, vaddr, intmode+region, pci */
7869 clean4: /* cfgtables, vaddr, intmode+region, pci */
7870 hpsa_free_cfgtables(h);
7871 clean3: /* vaddr, intmode+region, pci */
7874 clean2: /* intmode+region, pci */
7875 hpsa_disable_interrupt_mode(h);
7878 * call pci_disable_device before pci_release_regions per
7879 * Documentation/PCI/pci.txt
7881 pci_disable_device(h->pdev);
7882 pci_release_regions(h->pdev);
7886 static void hpsa_hba_inquiry(struct ctlr_info *h)
7890 #define HBA_INQUIRY_BYTE_COUNT 64
7891 h->hba_inquiry_data = kmalloc(HBA_INQUIRY_BYTE_COUNT, GFP_KERNEL);
7892 if (!h->hba_inquiry_data)
7894 rc = hpsa_scsi_do_inquiry(h, RAID_CTLR_LUNID, 0,
7895 h->hba_inquiry_data, HBA_INQUIRY_BYTE_COUNT);
7897 kfree(h->hba_inquiry_data);
7898 h->hba_inquiry_data = NULL;
7902 static int hpsa_init_reset_devices(struct pci_dev *pdev, u32 board_id)
7905 void __iomem *vaddr;
7910 /* kdump kernel is loading, we don't know in which state is
7911 * the pci interface. The dev->enable_cnt is equal zero
7912 * so we call enable+disable, wait a while and switch it on.
7914 rc = pci_enable_device(pdev);
7916 dev_warn(&pdev->dev, "Failed to enable PCI device\n");
7919 pci_disable_device(pdev);
7920 msleep(260); /* a randomly chosen number */
7921 rc = pci_enable_device(pdev);
7923 dev_warn(&pdev->dev, "failed to enable device.\n");
7927 pci_set_master(pdev);
7929 vaddr = pci_ioremap_bar(pdev, 0);
7930 if (vaddr == NULL) {
7934 writel(SA5_INTR_OFF, vaddr + SA5_REPLY_INTR_MASK_OFFSET);
7937 /* Reset the controller with a PCI power-cycle or via doorbell */
7938 rc = hpsa_kdump_hard_reset_controller(pdev, board_id);
7940 /* -ENOTSUPP here means we cannot reset the controller
7941 * but it's already (and still) up and running in
7942 * "performant mode". Or, it might be 640x, which can't reset
7943 * due to concerns about shared bbwc between 6402/6404 pair.
7948 /* Now try to get the controller to respond to a no-op */
7949 dev_info(&pdev->dev, "Waiting for controller to respond to no-op\n");
7950 for (i = 0; i < HPSA_POST_RESET_NOOP_RETRIES; i++) {
7951 if (hpsa_noop(pdev) == 0)
7954 dev_warn(&pdev->dev, "no-op failed%s\n",
7955 (i < 11 ? "; re-trying" : ""));
7960 pci_disable_device(pdev);
7964 static void hpsa_free_cmd_pool(struct ctlr_info *h)
7966 kfree(h->cmd_pool_bits);
7967 h->cmd_pool_bits = NULL;
7969 dma_free_coherent(&h->pdev->dev,
7970 h->nr_cmds * sizeof(struct CommandList),
7972 h->cmd_pool_dhandle);
7974 h->cmd_pool_dhandle = 0;
7976 if (h->errinfo_pool) {
7977 dma_free_coherent(&h->pdev->dev,
7978 h->nr_cmds * sizeof(struct ErrorInfo),
7980 h->errinfo_pool_dhandle);
7981 h->errinfo_pool = NULL;
7982 h->errinfo_pool_dhandle = 0;
7986 static int hpsa_alloc_cmd_pool(struct ctlr_info *h)
7988 h->cmd_pool_bits = kcalloc(DIV_ROUND_UP(h->nr_cmds, BITS_PER_LONG),
7989 sizeof(unsigned long),
7991 h->cmd_pool = dma_alloc_coherent(&h->pdev->dev,
7992 h->nr_cmds * sizeof(*h->cmd_pool),
7993 &h->cmd_pool_dhandle, GFP_KERNEL);
7994 h->errinfo_pool = dma_alloc_coherent(&h->pdev->dev,
7995 h->nr_cmds * sizeof(*h->errinfo_pool),
7996 &h->errinfo_pool_dhandle, GFP_KERNEL);
7997 if ((h->cmd_pool_bits == NULL)
7998 || (h->cmd_pool == NULL)
7999 || (h->errinfo_pool == NULL)) {
8000 dev_err(&h->pdev->dev, "out of memory in %s", __func__);
8003 hpsa_preinitialize_commands(h);
8006 hpsa_free_cmd_pool(h);
8010 /* clear affinity hints and free MSI-X, MSI, or legacy INTx vectors */
8011 static void hpsa_free_irqs(struct ctlr_info *h)
8016 if (hpsa_simple_mode)
8017 irq_vector = h->intr_mode;
8019 if (!h->msix_vectors || h->intr_mode != PERF_MODE_INT) {
8020 /* Single reply queue, only one irq to free */
8021 free_irq(pci_irq_vector(h->pdev, irq_vector),
8022 &h->q[h->intr_mode]);
8023 h->q[h->intr_mode] = 0;
8027 for (i = 0; i < h->msix_vectors; i++) {
8028 free_irq(pci_irq_vector(h->pdev, i), &h->q[i]);
8031 for (; i < MAX_REPLY_QUEUES; i++)
8035 /* returns 0 on success; cleans up and returns -Enn on error */
8036 static int hpsa_request_irqs(struct ctlr_info *h,
8037 irqreturn_t (*msixhandler)(int, void *),
8038 irqreturn_t (*intxhandler)(int, void *))
8043 if (hpsa_simple_mode)
8044 irq_vector = h->intr_mode;
8047 * initialize h->q[x] = x so that interrupt handlers know which
8050 for (i = 0; i < MAX_REPLY_QUEUES; i++)
8053 if (h->intr_mode == PERF_MODE_INT && h->msix_vectors > 0) {
8054 /* If performant mode and MSI-X, use multiple reply queues */
8055 for (i = 0; i < h->msix_vectors; i++) {
8056 sprintf(h->intrname[i], "%s-msix%d", h->devname, i);
8057 rc = request_irq(pci_irq_vector(h->pdev, i), msixhandler,
8063 dev_err(&h->pdev->dev,
8064 "failed to get irq %d for %s\n",
8065 pci_irq_vector(h->pdev, i), h->devname);
8066 for (j = 0; j < i; j++) {
8067 free_irq(pci_irq_vector(h->pdev, j), &h->q[j]);
8070 for (; j < MAX_REPLY_QUEUES; j++)
8076 /* Use single reply pool */
8077 if (h->msix_vectors > 0 || h->pdev->msi_enabled) {
8078 sprintf(h->intrname[0], "%s-msi%s", h->devname,
8079 h->msix_vectors ? "x" : "");
8080 rc = request_irq(pci_irq_vector(h->pdev, irq_vector),
8083 &h->q[h->intr_mode]);
8085 sprintf(h->intrname[h->intr_mode],
8086 "%s-intx", h->devname);
8087 rc = request_irq(pci_irq_vector(h->pdev, irq_vector),
8088 intxhandler, IRQF_SHARED,
8090 &h->q[h->intr_mode]);
8094 dev_err(&h->pdev->dev, "failed to get irq %d for %s\n",
8095 pci_irq_vector(h->pdev, irq_vector), h->devname);
8102 static int hpsa_kdump_soft_reset(struct ctlr_info *h)
8105 hpsa_send_host_reset(h, HPSA_RESET_TYPE_CONTROLLER);
8107 dev_info(&h->pdev->dev, "Waiting for board to soft reset.\n");
8108 rc = hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_NOT_READY);
8110 dev_warn(&h->pdev->dev, "Soft reset had no effect.\n");
8114 dev_info(&h->pdev->dev, "Board reset, awaiting READY status.\n");
8115 rc = hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY);
8117 dev_warn(&h->pdev->dev, "Board failed to become ready "
8118 "after soft reset.\n");
8125 static void hpsa_free_reply_queues(struct ctlr_info *h)
8129 for (i = 0; i < h->nreply_queues; i++) {
8130 if (!h->reply_queue[i].head)
8132 dma_free_coherent(&h->pdev->dev,
8133 h->reply_queue_size,
8134 h->reply_queue[i].head,
8135 h->reply_queue[i].busaddr);
8136 h->reply_queue[i].head = NULL;
8137 h->reply_queue[i].busaddr = 0;
8139 h->reply_queue_size = 0;
8142 static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
8144 hpsa_free_performant_mode(h); /* init_one 7 */
8145 hpsa_free_sg_chain_blocks(h); /* init_one 6 */
8146 hpsa_free_cmd_pool(h); /* init_one 5 */
8147 hpsa_free_irqs(h); /* init_one 4 */
8148 scsi_host_put(h->scsi_host); /* init_one 3 */
8149 h->scsi_host = NULL; /* init_one 3 */
8150 hpsa_free_pci_init(h); /* init_one 2_5 */
8151 free_percpu(h->lockup_detected); /* init_one 2 */
8152 h->lockup_detected = NULL; /* init_one 2 */
8153 if (h->resubmit_wq) {
8154 destroy_workqueue(h->resubmit_wq); /* init_one 1 */
8155 h->resubmit_wq = NULL;
8157 if (h->rescan_ctlr_wq) {
8158 destroy_workqueue(h->rescan_ctlr_wq);
8159 h->rescan_ctlr_wq = NULL;
8161 if (h->monitor_ctlr_wq) {
8162 destroy_workqueue(h->monitor_ctlr_wq);
8163 h->monitor_ctlr_wq = NULL;
8166 kfree(h); /* init_one 1 */
8169 /* Called when controller lockup detected. */
8170 static void fail_all_outstanding_cmds(struct ctlr_info *h)
8173 struct CommandList *c;
8176 flush_workqueue(h->resubmit_wq); /* ensure all cmds are fully built */
8177 for (i = 0; i < h->nr_cmds; i++) {
8178 c = h->cmd_pool + i;
8179 refcount = atomic_inc_return(&c->refcount);
8181 c->err_info->CommandStatus = CMD_CTLR_LOCKUP;
8183 atomic_dec(&h->commands_outstanding);
8188 dev_warn(&h->pdev->dev,
8189 "failed %d commands in fail_all\n", failcount);
8192 static void set_lockup_detected_for_all_cpus(struct ctlr_info *h, u32 value)
8196 for_each_online_cpu(cpu) {
8197 u32 *lockup_detected;
8198 lockup_detected = per_cpu_ptr(h->lockup_detected, cpu);
8199 *lockup_detected = value;
8201 wmb(); /* be sure the per-cpu variables are out to memory */
8204 static void controller_lockup_detected(struct ctlr_info *h)
8206 unsigned long flags;
8207 u32 lockup_detected;
8209 h->access.set_intr_mask(h, HPSA_INTR_OFF);
8210 spin_lock_irqsave(&h->lock, flags);
8211 lockup_detected = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
8212 if (!lockup_detected) {
8213 /* no heartbeat, but controller gave us a zero. */
8214 dev_warn(&h->pdev->dev,
8215 "lockup detected after %d but scratchpad register is zero\n",
8216 h->heartbeat_sample_interval / HZ);
8217 lockup_detected = 0xffffffff;
8219 set_lockup_detected_for_all_cpus(h, lockup_detected);
8220 spin_unlock_irqrestore(&h->lock, flags);
8221 dev_warn(&h->pdev->dev, "Controller lockup detected: 0x%08x after %d\n",
8222 lockup_detected, h->heartbeat_sample_interval / HZ);
8223 if (lockup_detected == 0xffff0000) {
8224 dev_warn(&h->pdev->dev, "Telling controller to do a CHKPT\n");
8225 writel(DOORBELL_GENERATE_CHKPT, h->vaddr + SA5_DOORBELL);
8227 pci_disable_device(h->pdev);
8228 fail_all_outstanding_cmds(h);
8231 static int detect_controller_lockup(struct ctlr_info *h)
8235 unsigned long flags;
8237 now = get_jiffies_64();
8238 /* If we've received an interrupt recently, we're ok. */
8239 if (time_after64(h->last_intr_timestamp +
8240 (h->heartbeat_sample_interval), now))
8244 * If we've already checked the heartbeat recently, we're ok.
8245 * This could happen if someone sends us a signal. We
8246 * otherwise don't care about signals in this thread.
8248 if (time_after64(h->last_heartbeat_timestamp +
8249 (h->heartbeat_sample_interval), now))
8252 /* If heartbeat has not changed since we last looked, we're not ok. */
8253 spin_lock_irqsave(&h->lock, flags);
8254 heartbeat = readl(&h->cfgtable->HeartBeat);
8255 spin_unlock_irqrestore(&h->lock, flags);
8256 if (h->last_heartbeat == heartbeat) {
8257 controller_lockup_detected(h);
8262 h->last_heartbeat = heartbeat;
8263 h->last_heartbeat_timestamp = now;
8268 * Set ioaccel status for all ioaccel volumes.
8270 * Called from monitor controller worker (hpsa_event_monitor_worker)
8272 * A Volume (or Volumes that comprise an Array set may be undergoing a
8273 * transformation, so we will be turning off ioaccel for all volumes that
8274 * make up the Array.
8276 static void hpsa_set_ioaccel_status(struct ctlr_info *h)
8282 struct hpsa_scsi_dev_t *device;
8287 buf = kmalloc(64, GFP_KERNEL);
8292 * Run through current device list used during I/O requests.
8294 for (i = 0; i < h->ndevices; i++) {
8299 if (!hpsa_vpd_page_supported(h, device->scsi3addr,
8300 HPSA_VPD_LV_IOACCEL_STATUS))
8305 rc = hpsa_scsi_do_inquiry(h, device->scsi3addr,
8306 VPD_PAGE | HPSA_VPD_LV_IOACCEL_STATUS,
8311 ioaccel_status = buf[IOACCEL_STATUS_BYTE];
8312 device->offload_config =
8313 !!(ioaccel_status & OFFLOAD_CONFIGURED_BIT);
8314 if (device->offload_config)
8315 device->offload_to_be_enabled =
8316 !!(ioaccel_status & OFFLOAD_ENABLED_BIT);
8319 * Immediately turn off ioaccel for any volume the
8320 * controller tells us to. Some of the reasons could be:
8321 * transformation - change to the LVs of an Array.
8322 * degraded volume - component failure
8324 * If ioaccel is to be re-enabled, re-enable later during the
8325 * scan operation so the driver can get a fresh raidmap
8326 * before turning ioaccel back on.
8329 if (!device->offload_to_be_enabled)
8330 device->offload_enabled = 0;
8336 static void hpsa_ack_ctlr_events(struct ctlr_info *h)
8340 if (!(h->fw_support & MISC_FW_EVENT_NOTIFY))
8343 /* Ask the controller to clear the events we're handling. */
8344 if ((h->transMethod & (CFGTBL_Trans_io_accel1
8345 | CFGTBL_Trans_io_accel2)) &&
8346 (h->events & HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE ||
8347 h->events & HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE)) {
8349 if (h->events & HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE)
8350 event_type = "state change";
8351 if (h->events & HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE)
8352 event_type = "configuration change";
8353 /* Stop sending new RAID offload reqs via the IO accelerator */
8354 scsi_block_requests(h->scsi_host);
8355 hpsa_set_ioaccel_status(h);
8356 hpsa_drain_accel_commands(h);
8357 /* Set 'accelerator path config change' bit */
8358 dev_warn(&h->pdev->dev,
8359 "Acknowledging event: 0x%08x (HP SSD Smart Path %s)\n",
8360 h->events, event_type);
8361 writel(h->events, &(h->cfgtable->clear_event_notify));
8362 /* Set the "clear event notify field update" bit 6 */
8363 writel(DOORBELL_CLEAR_EVENTS, h->vaddr + SA5_DOORBELL);
8364 /* Wait until ctlr clears 'clear event notify field', bit 6 */
8365 hpsa_wait_for_clear_event_notify_ack(h);
8366 scsi_unblock_requests(h->scsi_host);
8368 /* Acknowledge controller notification events. */
8369 writel(h->events, &(h->cfgtable->clear_event_notify));
8370 writel(DOORBELL_CLEAR_EVENTS, h->vaddr + SA5_DOORBELL);
8371 hpsa_wait_for_clear_event_notify_ack(h);
8376 /* Check a register on the controller to see if there are configuration
8377 * changes (added/changed/removed logical drives, etc.) which mean that
8378 * we should rescan the controller for devices.
8379 * Also check flag for driver-initiated rescan.
8381 static int hpsa_ctlr_needs_rescan(struct ctlr_info *h)
8383 if (h->drv_req_rescan) {
8384 h->drv_req_rescan = 0;
8388 if (!(h->fw_support & MISC_FW_EVENT_NOTIFY))
8391 h->events = readl(&(h->cfgtable->event_notify));
8392 return h->events & RESCAN_REQUIRED_EVENT_BITS;
8396 * Check if any of the offline devices have become ready
8398 static int hpsa_offline_devices_ready(struct ctlr_info *h)
8400 unsigned long flags;
8401 struct offline_device_entry *d;
8402 struct list_head *this, *tmp;
8404 spin_lock_irqsave(&h->offline_device_lock, flags);
8405 list_for_each_safe(this, tmp, &h->offline_device_list) {
8406 d = list_entry(this, struct offline_device_entry,
8408 spin_unlock_irqrestore(&h->offline_device_lock, flags);
8409 if (!hpsa_volume_offline(h, d->scsi3addr)) {
8410 spin_lock_irqsave(&h->offline_device_lock, flags);
8411 list_del(&d->offline_list);
8412 spin_unlock_irqrestore(&h->offline_device_lock, flags);
8415 spin_lock_irqsave(&h->offline_device_lock, flags);
8417 spin_unlock_irqrestore(&h->offline_device_lock, flags);
8421 static int hpsa_luns_changed(struct ctlr_info *h)
8423 int rc = 1; /* assume there are changes */
8424 struct ReportLUNdata *logdev = NULL;
8426 /* if we can't find out if lun data has changed,
8427 * assume that it has.
8430 if (!h->lastlogicals)
8433 logdev = kzalloc(sizeof(*logdev), GFP_KERNEL);
8437 if (hpsa_scsi_do_report_luns(h, 1, logdev, sizeof(*logdev), 0)) {
8438 dev_warn(&h->pdev->dev,
8439 "report luns failed, can't track lun changes.\n");
8442 if (memcmp(logdev, h->lastlogicals, sizeof(*logdev))) {
8443 dev_info(&h->pdev->dev,
8444 "Lun changes detected.\n");
8445 memcpy(h->lastlogicals, logdev, sizeof(*logdev));
8448 rc = 0; /* no changes detected. */
8454 static void hpsa_perform_rescan(struct ctlr_info *h)
8456 struct Scsi_Host *sh = NULL;
8457 unsigned long flags;
8460 * Do the scan after the reset
8462 spin_lock_irqsave(&h->reset_lock, flags);
8463 if (h->reset_in_progress) {
8464 h->drv_req_rescan = 1;
8465 spin_unlock_irqrestore(&h->reset_lock, flags);
8468 spin_unlock_irqrestore(&h->reset_lock, flags);
8470 sh = scsi_host_get(h->scsi_host);
8472 hpsa_scan_start(sh);
8474 h->drv_req_rescan = 0;
8479 * watch for controller events
8481 static void hpsa_event_monitor_worker(struct work_struct *work)
8483 struct ctlr_info *h = container_of(to_delayed_work(work),
8484 struct ctlr_info, event_monitor_work);
8485 unsigned long flags;
8487 spin_lock_irqsave(&h->lock, flags);
8488 if (h->remove_in_progress) {
8489 spin_unlock_irqrestore(&h->lock, flags);
8492 spin_unlock_irqrestore(&h->lock, flags);
8494 if (hpsa_ctlr_needs_rescan(h)) {
8495 hpsa_ack_ctlr_events(h);
8496 hpsa_perform_rescan(h);
8499 spin_lock_irqsave(&h->lock, flags);
8500 if (!h->remove_in_progress)
8501 queue_delayed_work(h->monitor_ctlr_wq, &h->event_monitor_work,
8502 HPSA_EVENT_MONITOR_INTERVAL);
8503 spin_unlock_irqrestore(&h->lock, flags);
8506 static void hpsa_rescan_ctlr_worker(struct work_struct *work)
8508 unsigned long flags;
8509 struct ctlr_info *h = container_of(to_delayed_work(work),
8510 struct ctlr_info, rescan_ctlr_work);
8512 spin_lock_irqsave(&h->lock, flags);
8513 if (h->remove_in_progress) {
8514 spin_unlock_irqrestore(&h->lock, flags);
8517 spin_unlock_irqrestore(&h->lock, flags);
8519 if (h->drv_req_rescan || hpsa_offline_devices_ready(h)) {
8520 hpsa_perform_rescan(h);
8521 } else if (h->discovery_polling) {
8522 if (hpsa_luns_changed(h)) {
8523 dev_info(&h->pdev->dev,
8524 "driver discovery polling rescan.\n");
8525 hpsa_perform_rescan(h);
8528 spin_lock_irqsave(&h->lock, flags);
8529 if (!h->remove_in_progress)
8530 queue_delayed_work(h->rescan_ctlr_wq, &h->rescan_ctlr_work,
8531 h->heartbeat_sample_interval);
8532 spin_unlock_irqrestore(&h->lock, flags);
8535 static void hpsa_monitor_ctlr_worker(struct work_struct *work)
8537 unsigned long flags;
8538 struct ctlr_info *h = container_of(to_delayed_work(work),
8539 struct ctlr_info, monitor_ctlr_work);
8541 detect_controller_lockup(h);
8542 if (lockup_detected(h))
8545 spin_lock_irqsave(&h->lock, flags);
8546 if (!h->remove_in_progress)
8547 queue_delayed_work(h->monitor_ctlr_wq, &h->monitor_ctlr_work,
8548 h->heartbeat_sample_interval);
8549 spin_unlock_irqrestore(&h->lock, flags);
8552 static struct workqueue_struct *hpsa_create_controller_wq(struct ctlr_info *h,
8555 struct workqueue_struct *wq = NULL;
8557 wq = alloc_ordered_workqueue("%s_%d_hpsa", 0, name, h->ctlr);
8559 dev_err(&h->pdev->dev, "failed to create %s workqueue\n", name);
8564 static void hpda_free_ctlr_info(struct ctlr_info *h)
8566 kfree(h->reply_map);
8570 static struct ctlr_info *hpda_alloc_ctlr_info(void)
8572 struct ctlr_info *h;
8574 h = kzalloc(sizeof(*h), GFP_KERNEL);
8578 h->reply_map = kcalloc(nr_cpu_ids, sizeof(*h->reply_map), GFP_KERNEL);
8579 if (!h->reply_map) {
8586 static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
8589 struct ctlr_info *h;
8590 int try_soft_reset = 0;
8591 unsigned long flags;
8594 if (number_of_controllers == 0)
8595 printk(KERN_INFO DRIVER_NAME "\n");
8597 rc = hpsa_lookup_board_id(pdev, &board_id, NULL);
8599 dev_warn(&pdev->dev, "Board ID not found\n");
8603 rc = hpsa_init_reset_devices(pdev, board_id);
8605 if (rc != -ENOTSUPP)
8607 /* If the reset fails in a particular way (it has no way to do
8608 * a proper hard reset, so returns -ENOTSUPP) we can try to do
8609 * a soft reset once we get the controller configured up to the
8610 * point that it can accept a command.
8616 reinit_after_soft_reset:
8618 /* Command structures must be aligned on a 32-byte boundary because
8619 * the 5 lower bits of the address are used by the hardware. and by
8620 * the driver. See comments in hpsa.h for more info.
8622 BUILD_BUG_ON(sizeof(struct CommandList) % COMMANDLIST_ALIGNMENT);
8623 h = hpda_alloc_ctlr_info();
8625 dev_err(&pdev->dev, "Failed to allocate controller head\n");
8631 h->intr_mode = hpsa_simple_mode ? SIMPLE_MODE_INT : PERF_MODE_INT;
8632 INIT_LIST_HEAD(&h->offline_device_list);
8633 spin_lock_init(&h->lock);
8634 spin_lock_init(&h->offline_device_lock);
8635 spin_lock_init(&h->scan_lock);
8636 spin_lock_init(&h->reset_lock);
8637 atomic_set(&h->passthru_cmds_avail, HPSA_MAX_CONCURRENT_PASSTHRUS);
8639 /* Allocate and clear per-cpu variable lockup_detected */
8640 h->lockup_detected = alloc_percpu(u32);
8641 if (!h->lockup_detected) {
8642 dev_err(&h->pdev->dev, "Failed to allocate lockup detector\n");
8644 goto clean1; /* aer/h */
8646 set_lockup_detected_for_all_cpus(h, 0);
8648 rc = hpsa_pci_init(h);
8650 goto clean2; /* lu, aer/h */
8652 /* relies on h-> settings made by hpsa_pci_init, including
8653 * interrupt_mode h->intr */
8654 rc = hpsa_scsi_host_alloc(h);
8656 goto clean2_5; /* pci, lu, aer/h */
8658 sprintf(h->devname, HPSA "%d", h->scsi_host->host_no);
8659 h->ctlr = number_of_controllers;
8660 number_of_controllers++;
8662 /* configure PCI DMA stuff */
8663 rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
8667 rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
8671 dev_err(&pdev->dev, "no suitable DMA available\n");
8672 goto clean3; /* shost, pci, lu, aer/h */
8676 /* make sure the board interrupts are off */
8677 h->access.set_intr_mask(h, HPSA_INTR_OFF);
8679 rc = hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx);
8681 goto clean3; /* shost, pci, lu, aer/h */
8682 rc = hpsa_alloc_cmd_pool(h);
8684 goto clean4; /* irq, shost, pci, lu, aer/h */
8685 rc = hpsa_alloc_sg_chain_blocks(h);
8687 goto clean5; /* cmd, irq, shost, pci, lu, aer/h */
8688 init_waitqueue_head(&h->scan_wait_queue);
8689 init_waitqueue_head(&h->event_sync_wait_queue);
8690 mutex_init(&h->reset_mutex);
8691 h->scan_finished = 1; /* no scan currently in progress */
8692 h->scan_waiting = 0;
8694 pci_set_drvdata(pdev, h);
8697 spin_lock_init(&h->devlock);
8698 rc = hpsa_put_ctlr_into_performant_mode(h);
8700 goto clean6; /* sg, cmd, irq, shost, pci, lu, aer/h */
8702 /* create the resubmit workqueue */
8703 h->rescan_ctlr_wq = hpsa_create_controller_wq(h, "rescan");
8704 if (!h->rescan_ctlr_wq) {
8709 h->resubmit_wq = hpsa_create_controller_wq(h, "resubmit");
8710 if (!h->resubmit_wq) {
8712 goto clean7; /* aer/h */
8715 h->monitor_ctlr_wq = hpsa_create_controller_wq(h, "monitor");
8716 if (!h->monitor_ctlr_wq) {
8722 * At this point, the controller is ready to take commands.
8723 * Now, if reset_devices and the hard reset didn't work, try
8724 * the soft reset and see if that works.
8726 if (try_soft_reset) {
8728 /* This is kind of gross. We may or may not get a completion
8729 * from the soft reset command, and if we do, then the value
8730 * from the fifo may or may not be valid. So, we wait 10 secs
8731 * after the reset throwing away any completions we get during
8732 * that time. Unregister the interrupt handler and register
8733 * fake ones to scoop up any residual completions.
8735 spin_lock_irqsave(&h->lock, flags);
8736 h->access.set_intr_mask(h, HPSA_INTR_OFF);
8737 spin_unlock_irqrestore(&h->lock, flags);
8739 rc = hpsa_request_irqs(h, hpsa_msix_discard_completions,
8740 hpsa_intx_discard_completions);
8742 dev_warn(&h->pdev->dev,
8743 "Failed to request_irq after soft reset.\n");
8745 * cannot goto clean7 or free_irqs will be called
8746 * again. Instead, do its work
8748 hpsa_free_performant_mode(h); /* clean7 */
8749 hpsa_free_sg_chain_blocks(h); /* clean6 */
8750 hpsa_free_cmd_pool(h); /* clean5 */
8752 * skip hpsa_free_irqs(h) clean4 since that
8753 * was just called before request_irqs failed
8758 rc = hpsa_kdump_soft_reset(h);
8760 /* Neither hard nor soft reset worked, we're hosed. */
8763 dev_info(&h->pdev->dev, "Board READY.\n");
8764 dev_info(&h->pdev->dev,
8765 "Waiting for stale completions to drain.\n");
8766 h->access.set_intr_mask(h, HPSA_INTR_ON);
8768 h->access.set_intr_mask(h, HPSA_INTR_OFF);
8770 rc = controller_reset_failed(h->cfgtable);
8772 dev_info(&h->pdev->dev,
8773 "Soft reset appears to have failed.\n");
8775 /* since the controller's reset, we have to go back and re-init
8776 * everything. Easiest to just forget what we've done and do it
8779 hpsa_undo_allocations_after_kdump_soft_reset(h);
8782 /* don't goto clean, we already unallocated */
8785 goto reinit_after_soft_reset;
8788 /* Enable Accelerated IO path at driver layer */
8789 h->acciopath_status = 1;
8790 /* Disable discovery polling.*/
8791 h->discovery_polling = 0;
8794 /* Turn the interrupts on so we can service requests */
8795 h->access.set_intr_mask(h, HPSA_INTR_ON);
8797 hpsa_hba_inquiry(h);
8799 h->lastlogicals = kzalloc(sizeof(*(h->lastlogicals)), GFP_KERNEL);
8800 if (!h->lastlogicals)
8801 dev_info(&h->pdev->dev,
8802 "Can't track change to report lun data\n");
8804 /* hook into SCSI subsystem */
8805 rc = hpsa_scsi_add_host(h);
8807 goto clean7; /* perf, sg, cmd, irq, shost, pci, lu, aer/h */
8809 /* Monitor the controller for firmware lockups */
8810 h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL;
8811 INIT_DELAYED_WORK(&h->monitor_ctlr_work, hpsa_monitor_ctlr_worker);
8812 schedule_delayed_work(&h->monitor_ctlr_work,
8813 h->heartbeat_sample_interval);
8814 INIT_DELAYED_WORK(&h->rescan_ctlr_work, hpsa_rescan_ctlr_worker);
8815 queue_delayed_work(h->rescan_ctlr_wq, &h->rescan_ctlr_work,
8816 h->heartbeat_sample_interval);
8817 INIT_DELAYED_WORK(&h->event_monitor_work, hpsa_event_monitor_worker);
8818 schedule_delayed_work(&h->event_monitor_work,
8819 HPSA_EVENT_MONITOR_INTERVAL);
8822 clean7: /* perf, sg, cmd, irq, shost, pci, lu, aer/h */
8823 hpsa_free_performant_mode(h);
8824 h->access.set_intr_mask(h, HPSA_INTR_OFF);
8825 clean6: /* sg, cmd, irq, pci, lockup, wq/aer/h */
8826 hpsa_free_sg_chain_blocks(h);
8827 clean5: /* cmd, irq, shost, pci, lu, aer/h */
8828 hpsa_free_cmd_pool(h);
8829 clean4: /* irq, shost, pci, lu, aer/h */
8831 clean3: /* shost, pci, lu, aer/h */
8832 scsi_host_put(h->scsi_host);
8833 h->scsi_host = NULL;
8834 clean2_5: /* pci, lu, aer/h */
8835 hpsa_free_pci_init(h);
8836 clean2: /* lu, aer/h */
8837 if (h->lockup_detected) {
8838 free_percpu(h->lockup_detected);
8839 h->lockup_detected = NULL;
8841 clean1: /* wq/aer/h */
8842 if (h->resubmit_wq) {
8843 destroy_workqueue(h->resubmit_wq);
8844 h->resubmit_wq = NULL;
8846 if (h->rescan_ctlr_wq) {
8847 destroy_workqueue(h->rescan_ctlr_wq);
8848 h->rescan_ctlr_wq = NULL;
8850 if (h->monitor_ctlr_wq) {
8851 destroy_workqueue(h->monitor_ctlr_wq);
8852 h->monitor_ctlr_wq = NULL;
8858 static void hpsa_flush_cache(struct ctlr_info *h)
8861 struct CommandList *c;
8864 if (unlikely(lockup_detected(h)))
8866 flush_buf = kzalloc(4, GFP_KERNEL);
8872 if (fill_cmd(c, HPSA_CACHE_FLUSH, h, flush_buf, 4, 0,
8873 RAID_CTLR_LUNID, TYPE_CMD)) {
8876 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_TO_DEVICE,
8880 if (c->err_info->CommandStatus != 0)
8882 dev_warn(&h->pdev->dev,
8883 "error flushing cache on controller\n");
8888 /* Make controller gather fresh report lun data each time we
8889 * send down a report luns request
8891 static void hpsa_disable_rld_caching(struct ctlr_info *h)
8894 struct CommandList *c;
8897 /* Don't bother trying to set diag options if locked up */
8898 if (unlikely(h->lockup_detected))
8901 options = kzalloc(sizeof(*options), GFP_KERNEL);
8907 /* first, get the current diag options settings */
8908 if (fill_cmd(c, BMIC_SENSE_DIAG_OPTIONS, h, options, 4, 0,
8909 RAID_CTLR_LUNID, TYPE_CMD))
8912 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE,
8914 if ((rc != 0) || (c->err_info->CommandStatus != 0))
8917 /* Now, set the bit for disabling the RLD caching */
8918 *options |= HPSA_DIAG_OPTS_DISABLE_RLD_CACHING;
8920 if (fill_cmd(c, BMIC_SET_DIAG_OPTIONS, h, options, 4, 0,
8921 RAID_CTLR_LUNID, TYPE_CMD))
8924 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_TO_DEVICE,
8926 if ((rc != 0) || (c->err_info->CommandStatus != 0))
8929 /* Now verify that it got set: */
8930 if (fill_cmd(c, BMIC_SENSE_DIAG_OPTIONS, h, options, 4, 0,
8931 RAID_CTLR_LUNID, TYPE_CMD))
8934 rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE,
8936 if ((rc != 0) || (c->err_info->CommandStatus != 0))
8939 if (*options & HPSA_DIAG_OPTS_DISABLE_RLD_CACHING)
8943 dev_err(&h->pdev->dev,
8944 "Error: failed to disable report lun data caching.\n");
8950 static void __hpsa_shutdown(struct pci_dev *pdev)
8952 struct ctlr_info *h;
8954 h = pci_get_drvdata(pdev);
8955 /* Turn board interrupts off and send the flush cache command
8956 * sendcmd will turn off interrupt, and send the flush...
8957 * To write all data in the battery backed cache to disks
8959 hpsa_flush_cache(h);
8960 h->access.set_intr_mask(h, HPSA_INTR_OFF);
8961 hpsa_free_irqs(h); /* init_one 4 */
8962 hpsa_disable_interrupt_mode(h); /* pci_init 2 */
8965 static void hpsa_shutdown(struct pci_dev *pdev)
8967 __hpsa_shutdown(pdev);
8968 pci_disable_device(pdev);
8971 static void hpsa_free_device_info(struct ctlr_info *h)
8975 for (i = 0; i < h->ndevices; i++) {
8981 static void hpsa_remove_one(struct pci_dev *pdev)
8983 struct ctlr_info *h;
8984 unsigned long flags;
8986 if (pci_get_drvdata(pdev) == NULL) {
8987 dev_err(&pdev->dev, "unable to remove device\n");
8990 h = pci_get_drvdata(pdev);
8992 /* Get rid of any controller monitoring work items */
8993 spin_lock_irqsave(&h->lock, flags);
8994 h->remove_in_progress = 1;
8995 spin_unlock_irqrestore(&h->lock, flags);
8996 cancel_delayed_work_sync(&h->monitor_ctlr_work);
8997 cancel_delayed_work_sync(&h->rescan_ctlr_work);
8998 cancel_delayed_work_sync(&h->event_monitor_work);
8999 destroy_workqueue(h->rescan_ctlr_wq);
9000 destroy_workqueue(h->resubmit_wq);
9001 destroy_workqueue(h->monitor_ctlr_wq);
9003 hpsa_delete_sas_host(h);
9006 * Call before disabling interrupts.
9007 * scsi_remove_host can trigger I/O operations especially
9008 * when multipath is enabled. There can be SYNCHRONIZE CACHE
9009 * operations which cannot complete and will hang the system.
9012 scsi_remove_host(h->scsi_host); /* init_one 8 */
9013 /* includes hpsa_free_irqs - init_one 4 */
9014 /* includes hpsa_disable_interrupt_mode - pci_init 2 */
9015 __hpsa_shutdown(pdev);
9017 hpsa_free_device_info(h); /* scan */
9019 kfree(h->hba_inquiry_data); /* init_one 10 */
9020 h->hba_inquiry_data = NULL; /* init_one 10 */
9021 hpsa_free_ioaccel2_sg_chain_blocks(h);
9022 hpsa_free_performant_mode(h); /* init_one 7 */
9023 hpsa_free_sg_chain_blocks(h); /* init_one 6 */
9024 hpsa_free_cmd_pool(h); /* init_one 5 */
9025 kfree(h->lastlogicals);
9027 /* hpsa_free_irqs already called via hpsa_shutdown init_one 4 */
9029 scsi_host_put(h->scsi_host); /* init_one 3 */
9030 h->scsi_host = NULL; /* init_one 3 */
9032 /* includes hpsa_disable_interrupt_mode - pci_init 2 */
9033 hpsa_free_pci_init(h); /* init_one 2.5 */
9035 free_percpu(h->lockup_detected); /* init_one 2 */
9036 h->lockup_detected = NULL; /* init_one 2 */
9037 /* (void) pci_disable_pcie_error_reporting(pdev); */ /* init_one 1 */
9039 hpda_free_ctlr_info(h); /* init_one 1 */
9042 static int hpsa_suspend(__attribute__((unused)) struct pci_dev *pdev,
9043 __attribute__((unused)) pm_message_t state)
9048 static int hpsa_resume(__attribute__((unused)) struct pci_dev *pdev)
9053 static struct pci_driver hpsa_pci_driver = {
9055 .probe = hpsa_init_one,
9056 .remove = hpsa_remove_one,
9057 .id_table = hpsa_pci_device_id, /* id_table */
9058 .shutdown = hpsa_shutdown,
9059 .suspend = hpsa_suspend,
9060 .resume = hpsa_resume,
9063 /* Fill in bucket_map[], given nsgs (the max number of
9064 * scatter gather elements supported) and bucket[],
9065 * which is an array of 8 integers. The bucket[] array
9066 * contains 8 different DMA transfer sizes (in 16
9067 * byte increments) which the controller uses to fetch
9068 * commands. This function fills in bucket_map[], which
9069 * maps a given number of scatter gather elements to one of
9070 * the 8 DMA transfer sizes. The point of it is to allow the
9071 * controller to only do as much DMA as needed to fetch the
9072 * command, with the DMA transfer size encoded in the lower
9073 * bits of the command address.
9075 static void calc_bucket_map(int bucket[], int num_buckets,
9076 int nsgs, int min_blocks, u32 *bucket_map)
9080 /* Note, bucket_map must have nsgs+1 entries. */
9081 for (i = 0; i <= nsgs; i++) {
9082 /* Compute size of a command with i SG entries */
9083 size = i + min_blocks;
9084 b = num_buckets; /* Assume the biggest bucket */
9085 /* Find the bucket that is just big enough */
9086 for (j = 0; j < num_buckets; j++) {
9087 if (bucket[j] >= size) {
9092 /* for a command with i SG entries, use bucket b. */
9098 * return -ENODEV on err, 0 on success (or no action)
9099 * allocates numerous items that must be freed later
9101 static int hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support)
9104 unsigned long register_value;
9105 unsigned long transMethod = CFGTBL_Trans_Performant |
9106 (trans_support & CFGTBL_Trans_use_short_tags) |
9107 CFGTBL_Trans_enable_directed_msix |
9108 (trans_support & (CFGTBL_Trans_io_accel1 |
9109 CFGTBL_Trans_io_accel2));
9110 struct access_method access = SA5_performant_access;
9112 /* This is a bit complicated. There are 8 registers on
9113 * the controller which we write to to tell it 8 different
9114 * sizes of commands which there may be. It's a way of
9115 * reducing the DMA done to fetch each command. Encoded into
9116 * each command's tag are 3 bits which communicate to the controller
9117 * which of the eight sizes that command fits within. The size of
9118 * each command depends on how many scatter gather entries there are.
9119 * Each SG entry requires 16 bytes. The eight registers are programmed
9120 * with the number of 16-byte blocks a command of that size requires.
9121 * The smallest command possible requires 5 such 16 byte blocks.
9122 * the largest command possible requires SG_ENTRIES_IN_CMD + 4 16-byte
9123 * blocks. Note, this only extends to the SG entries contained
9124 * within the command block, and does not extend to chained blocks
9125 * of SG elements. bft[] contains the eight values we write to
9126 * the registers. They are not evenly distributed, but have more
9127 * sizes for small commands, and fewer sizes for larger commands.
9129 int bft[8] = {5, 6, 8, 10, 12, 20, 28, SG_ENTRIES_IN_CMD + 4};
9130 #define MIN_IOACCEL2_BFT_ENTRY 5
9131 #define HPSA_IOACCEL2_HEADER_SZ 4
9132 int bft2[16] = {MIN_IOACCEL2_BFT_ENTRY, 6, 7, 8, 9, 10, 11, 12,
9133 13, 14, 15, 16, 17, 18, 19,
9134 HPSA_IOACCEL2_HEADER_SZ + IOACCEL2_MAXSGENTRIES};
9135 BUILD_BUG_ON(ARRAY_SIZE(bft2) != 16);
9136 BUILD_BUG_ON(ARRAY_SIZE(bft) != 8);
9137 BUILD_BUG_ON(offsetof(struct io_accel2_cmd, sg) >
9138 16 * MIN_IOACCEL2_BFT_ENTRY);
9139 BUILD_BUG_ON(sizeof(struct ioaccel2_sg_element) != 16);
9140 BUILD_BUG_ON(28 > SG_ENTRIES_IN_CMD + 4);
9141 /* 5 = 1 s/g entry or 4k
9142 * 6 = 2 s/g entry or 8k
9143 * 8 = 4 s/g entry or 16k
9144 * 10 = 6 s/g entry or 24k
9147 /* If the controller supports either ioaccel method then
9148 * we can also use the RAID stack submit path that does not
9149 * perform the superfluous readl() after each command submission.
9151 if (trans_support & (CFGTBL_Trans_io_accel1 | CFGTBL_Trans_io_accel2))
9152 access = SA5_performant_access_no_read;
9154 /* Controller spec: zero out this buffer. */
9155 for (i = 0; i < h->nreply_queues; i++)
9156 memset(h->reply_queue[i].head, 0, h->reply_queue_size);
9158 bft[7] = SG_ENTRIES_IN_CMD + 4;
9159 calc_bucket_map(bft, ARRAY_SIZE(bft),
9160 SG_ENTRIES_IN_CMD, 4, h->blockFetchTable);
9161 for (i = 0; i < 8; i++)
9162 writel(bft[i], &h->transtable->BlockFetch[i]);
9164 /* size of controller ring buffer */
9165 writel(h->max_commands, &h->transtable->RepQSize);
9166 writel(h->nreply_queues, &h->transtable->RepQCount);
9167 writel(0, &h->transtable->RepQCtrAddrLow32);
9168 writel(0, &h->transtable->RepQCtrAddrHigh32);
9170 for (i = 0; i < h->nreply_queues; i++) {
9171 writel(0, &h->transtable->RepQAddr[i].upper);
9172 writel(h->reply_queue[i].busaddr,
9173 &h->transtable->RepQAddr[i].lower);
9176 writel(0, &h->cfgtable->HostWrite.command_pool_addr_hi);
9177 writel(transMethod, &(h->cfgtable->HostWrite.TransportRequest));
9179 * enable outbound interrupt coalescing in accelerator mode;
9181 if (trans_support & CFGTBL_Trans_io_accel1) {
9182 access = SA5_ioaccel_mode1_access;
9183 writel(10, &h->cfgtable->HostWrite.CoalIntDelay);
9184 writel(4, &h->cfgtable->HostWrite.CoalIntCount);
9186 if (trans_support & CFGTBL_Trans_io_accel2)
9187 access = SA5_ioaccel_mode2_access;
9188 writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
9189 if (hpsa_wait_for_mode_change_ack(h)) {
9190 dev_err(&h->pdev->dev,
9191 "performant mode problem - doorbell timeout\n");
9194 register_value = readl(&(h->cfgtable->TransportActive));
9195 if (!(register_value & CFGTBL_Trans_Performant)) {
9196 dev_err(&h->pdev->dev,
9197 "performant mode problem - transport not active\n");
9200 /* Change the access methods to the performant access methods */
9202 h->transMethod = transMethod;
9204 if (!((trans_support & CFGTBL_Trans_io_accel1) ||
9205 (trans_support & CFGTBL_Trans_io_accel2)))
9208 if (trans_support & CFGTBL_Trans_io_accel1) {
9209 /* Set up I/O accelerator mode */
9210 for (i = 0; i < h->nreply_queues; i++) {
9211 writel(i, h->vaddr + IOACCEL_MODE1_REPLY_QUEUE_INDEX);
9212 h->reply_queue[i].current_entry =
9213 readl(h->vaddr + IOACCEL_MODE1_PRODUCER_INDEX);
9215 bft[7] = h->ioaccel_maxsg + 8;
9216 calc_bucket_map(bft, ARRAY_SIZE(bft), h->ioaccel_maxsg, 8,
9217 h->ioaccel1_blockFetchTable);
9219 /* initialize all reply queue entries to unused */
9220 for (i = 0; i < h->nreply_queues; i++)
9221 memset(h->reply_queue[i].head,
9222 (u8) IOACCEL_MODE1_REPLY_UNUSED,
9223 h->reply_queue_size);
9225 /* set all the constant fields in the accelerator command
9226 * frames once at init time to save CPU cycles later.
9228 for (i = 0; i < h->nr_cmds; i++) {
9229 struct io_accel1_cmd *cp = &h->ioaccel_cmd_pool[i];
9231 cp->function = IOACCEL1_FUNCTION_SCSIIO;
9232 cp->err_info = (u32) (h->errinfo_pool_dhandle +
9233 (i * sizeof(struct ErrorInfo)));
9234 cp->err_info_len = sizeof(struct ErrorInfo);
9235 cp->sgl_offset = IOACCEL1_SGLOFFSET;
9236 cp->host_context_flags =
9237 cpu_to_le16(IOACCEL1_HCFLAGS_CISS_FORMAT);
9238 cp->timeout_sec = 0;
9241 cpu_to_le64((i << DIRECT_LOOKUP_SHIFT));
9243 cpu_to_le64(h->ioaccel_cmd_pool_dhandle +
9244 (i * sizeof(struct io_accel1_cmd)));
9246 } else if (trans_support & CFGTBL_Trans_io_accel2) {
9247 u64 cfg_offset, cfg_base_addr_index;
9248 u32 bft2_offset, cfg_base_addr;
9251 rc = hpsa_find_cfg_addrs(h->pdev, h->vaddr, &cfg_base_addr,
9252 &cfg_base_addr_index, &cfg_offset);
9253 BUILD_BUG_ON(offsetof(struct io_accel2_cmd, sg) != 64);
9254 bft2[15] = h->ioaccel_maxsg + HPSA_IOACCEL2_HEADER_SZ;
9255 calc_bucket_map(bft2, ARRAY_SIZE(bft2), h->ioaccel_maxsg,
9256 4, h->ioaccel2_blockFetchTable);
9257 bft2_offset = readl(&h->cfgtable->io_accel_request_size_offset);
9258 BUILD_BUG_ON(offsetof(struct CfgTable,
9259 io_accel_request_size_offset) != 0xb8);
9260 h->ioaccel2_bft2_regs =
9261 remap_pci_mem(pci_resource_start(h->pdev,
9262 cfg_base_addr_index) +
9263 cfg_offset + bft2_offset,
9265 sizeof(*h->ioaccel2_bft2_regs));
9266 for (i = 0; i < ARRAY_SIZE(bft2); i++)
9267 writel(bft2[i], &h->ioaccel2_bft2_regs[i]);
9269 writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
9270 if (hpsa_wait_for_mode_change_ack(h)) {
9271 dev_err(&h->pdev->dev,
9272 "performant mode problem - enabling ioaccel mode\n");
9278 /* Free ioaccel1 mode command blocks and block fetch table */
9279 static void hpsa_free_ioaccel1_cmd_and_bft(struct ctlr_info *h)
9281 if (h->ioaccel_cmd_pool) {
9282 pci_free_consistent(h->pdev,
9283 h->nr_cmds * sizeof(*h->ioaccel_cmd_pool),
9284 h->ioaccel_cmd_pool,
9285 h->ioaccel_cmd_pool_dhandle);
9286 h->ioaccel_cmd_pool = NULL;
9287 h->ioaccel_cmd_pool_dhandle = 0;
9289 kfree(h->ioaccel1_blockFetchTable);
9290 h->ioaccel1_blockFetchTable = NULL;
9293 /* Allocate ioaccel1 mode command blocks and block fetch table */
9294 static int hpsa_alloc_ioaccel1_cmd_and_bft(struct ctlr_info *h)
9297 readl(&(h->cfgtable->io_accel_max_embedded_sg_count));
9298 if (h->ioaccel_maxsg > IOACCEL1_MAXSGENTRIES)
9299 h->ioaccel_maxsg = IOACCEL1_MAXSGENTRIES;
9301 /* Command structures must be aligned on a 128-byte boundary
9302 * because the 7 lower bits of the address are used by the
9305 BUILD_BUG_ON(sizeof(struct io_accel1_cmd) %
9306 IOACCEL1_COMMANDLIST_ALIGNMENT);
9307 h->ioaccel_cmd_pool =
9308 dma_alloc_coherent(&h->pdev->dev,
9309 h->nr_cmds * sizeof(*h->ioaccel_cmd_pool),
9310 &h->ioaccel_cmd_pool_dhandle, GFP_KERNEL);
9312 h->ioaccel1_blockFetchTable =
9313 kmalloc(((h->ioaccel_maxsg + 1) *
9314 sizeof(u32)), GFP_KERNEL);
9316 if ((h->ioaccel_cmd_pool == NULL) ||
9317 (h->ioaccel1_blockFetchTable == NULL))
9320 memset(h->ioaccel_cmd_pool, 0,
9321 h->nr_cmds * sizeof(*h->ioaccel_cmd_pool));
9325 hpsa_free_ioaccel1_cmd_and_bft(h);
9329 /* Free ioaccel2 mode command blocks and block fetch table */
9330 static void hpsa_free_ioaccel2_cmd_and_bft(struct ctlr_info *h)
9332 hpsa_free_ioaccel2_sg_chain_blocks(h);
9334 if (h->ioaccel2_cmd_pool) {
9335 pci_free_consistent(h->pdev,
9336 h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool),
9337 h->ioaccel2_cmd_pool,
9338 h->ioaccel2_cmd_pool_dhandle);
9339 h->ioaccel2_cmd_pool = NULL;
9340 h->ioaccel2_cmd_pool_dhandle = 0;
9342 kfree(h->ioaccel2_blockFetchTable);
9343 h->ioaccel2_blockFetchTable = NULL;
9346 /* Allocate ioaccel2 mode command blocks and block fetch table */
9347 static int hpsa_alloc_ioaccel2_cmd_and_bft(struct ctlr_info *h)
9351 /* Allocate ioaccel2 mode command blocks and block fetch table */
9354 readl(&(h->cfgtable->io_accel_max_embedded_sg_count));
9355 if (h->ioaccel_maxsg > IOACCEL2_MAXSGENTRIES)
9356 h->ioaccel_maxsg = IOACCEL2_MAXSGENTRIES;
9358 BUILD_BUG_ON(sizeof(struct io_accel2_cmd) %
9359 IOACCEL2_COMMANDLIST_ALIGNMENT);
9360 h->ioaccel2_cmd_pool =
9361 dma_alloc_coherent(&h->pdev->dev,
9362 h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool),
9363 &h->ioaccel2_cmd_pool_dhandle, GFP_KERNEL);
9365 h->ioaccel2_blockFetchTable =
9366 kmalloc(((h->ioaccel_maxsg + 1) *
9367 sizeof(u32)), GFP_KERNEL);
9369 if ((h->ioaccel2_cmd_pool == NULL) ||
9370 (h->ioaccel2_blockFetchTable == NULL)) {
9375 rc = hpsa_allocate_ioaccel2_sg_chain_blocks(h);
9379 memset(h->ioaccel2_cmd_pool, 0,
9380 h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool));
9384 hpsa_free_ioaccel2_cmd_and_bft(h);
9388 /* Free items allocated by hpsa_put_ctlr_into_performant_mode */
9389 static void hpsa_free_performant_mode(struct ctlr_info *h)
9391 kfree(h->blockFetchTable);
9392 h->blockFetchTable = NULL;
9393 hpsa_free_reply_queues(h);
9394 hpsa_free_ioaccel1_cmd_and_bft(h);
9395 hpsa_free_ioaccel2_cmd_and_bft(h);
9398 /* return -ENODEV on error, 0 on success (or no action)
9399 * allocates numerous items that must be freed later
9401 static int hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h)
9404 unsigned long transMethod = CFGTBL_Trans_Performant |
9405 CFGTBL_Trans_use_short_tags;
9408 if (hpsa_simple_mode)
9411 trans_support = readl(&(h->cfgtable->TransportSupport));
9412 if (!(trans_support & PERFORMANT_MODE))
9415 /* Check for I/O accelerator mode support */
9416 if (trans_support & CFGTBL_Trans_io_accel1) {
9417 transMethod |= CFGTBL_Trans_io_accel1 |
9418 CFGTBL_Trans_enable_directed_msix;
9419 rc = hpsa_alloc_ioaccel1_cmd_and_bft(h);
9422 } else if (trans_support & CFGTBL_Trans_io_accel2) {
9423 transMethod |= CFGTBL_Trans_io_accel2 |
9424 CFGTBL_Trans_enable_directed_msix;
9425 rc = hpsa_alloc_ioaccel2_cmd_and_bft(h);
9430 h->nreply_queues = h->msix_vectors > 0 ? h->msix_vectors : 1;
9431 hpsa_get_max_perf_mode_cmds(h);
9432 /* Performant mode ring buffer and supporting data structures */
9433 h->reply_queue_size = h->max_commands * sizeof(u64);
9435 for (i = 0; i < h->nreply_queues; i++) {
9436 h->reply_queue[i].head = dma_alloc_coherent(&h->pdev->dev,
9437 h->reply_queue_size,
9438 &h->reply_queue[i].busaddr,
9440 if (!h->reply_queue[i].head) {
9442 goto clean1; /* rq, ioaccel */
9444 h->reply_queue[i].size = h->max_commands;
9445 h->reply_queue[i].wraparound = 1; /* spec: init to 1 */
9446 h->reply_queue[i].current_entry = 0;
9449 /* Need a block fetch table for performant mode */
9450 h->blockFetchTable = kmalloc(((SG_ENTRIES_IN_CMD + 1) *
9451 sizeof(u32)), GFP_KERNEL);
9452 if (!h->blockFetchTable) {
9454 goto clean1; /* rq, ioaccel */
9457 rc = hpsa_enter_performant_mode(h, trans_support);
9459 goto clean2; /* bft, rq, ioaccel */
9462 clean2: /* bft, rq, ioaccel */
9463 kfree(h->blockFetchTable);
9464 h->blockFetchTable = NULL;
9465 clean1: /* rq, ioaccel */
9466 hpsa_free_reply_queues(h);
9467 hpsa_free_ioaccel1_cmd_and_bft(h);
9468 hpsa_free_ioaccel2_cmd_and_bft(h);
9472 static int is_accelerated_cmd(struct CommandList *c)
9474 return c->cmd_type == CMD_IOACCEL1 || c->cmd_type == CMD_IOACCEL2;
9477 static void hpsa_drain_accel_commands(struct ctlr_info *h)
9479 struct CommandList *c = NULL;
9480 int i, accel_cmds_out;
9483 do { /* wait for all outstanding ioaccel commands to drain out */
9485 for (i = 0; i < h->nr_cmds; i++) {
9486 c = h->cmd_pool + i;
9487 refcount = atomic_inc_return(&c->refcount);
9488 if (refcount > 1) /* Command is allocated */
9489 accel_cmds_out += is_accelerated_cmd(c);
9492 if (accel_cmds_out <= 0)
9498 static struct hpsa_sas_phy *hpsa_alloc_sas_phy(
9499 struct hpsa_sas_port *hpsa_sas_port)
9501 struct hpsa_sas_phy *hpsa_sas_phy;
9502 struct sas_phy *phy;
9504 hpsa_sas_phy = kzalloc(sizeof(*hpsa_sas_phy), GFP_KERNEL);
9508 phy = sas_phy_alloc(hpsa_sas_port->parent_node->parent_dev,
9509 hpsa_sas_port->next_phy_index);
9511 kfree(hpsa_sas_phy);
9515 hpsa_sas_port->next_phy_index++;
9516 hpsa_sas_phy->phy = phy;
9517 hpsa_sas_phy->parent_port = hpsa_sas_port;
9519 return hpsa_sas_phy;
9522 static void hpsa_free_sas_phy(struct hpsa_sas_phy *hpsa_sas_phy)
9524 struct sas_phy *phy = hpsa_sas_phy->phy;
9526 sas_port_delete_phy(hpsa_sas_phy->parent_port->port, phy);
9527 if (hpsa_sas_phy->added_to_port)
9528 list_del(&hpsa_sas_phy->phy_list_entry);
9529 sas_phy_delete(phy);
9530 kfree(hpsa_sas_phy);
9533 static int hpsa_sas_port_add_phy(struct hpsa_sas_phy *hpsa_sas_phy)
9536 struct hpsa_sas_port *hpsa_sas_port;
9537 struct sas_phy *phy;
9538 struct sas_identify *identify;
9540 hpsa_sas_port = hpsa_sas_phy->parent_port;
9541 phy = hpsa_sas_phy->phy;
9543 identify = &phy->identify;
9544 memset(identify, 0, sizeof(*identify));
9545 identify->sas_address = hpsa_sas_port->sas_address;
9546 identify->device_type = SAS_END_DEVICE;
9547 identify->initiator_port_protocols = SAS_PROTOCOL_STP;
9548 identify->target_port_protocols = SAS_PROTOCOL_STP;
9549 phy->minimum_linkrate_hw = SAS_LINK_RATE_UNKNOWN;
9550 phy->maximum_linkrate_hw = SAS_LINK_RATE_UNKNOWN;
9551 phy->minimum_linkrate = SAS_LINK_RATE_UNKNOWN;
9552 phy->maximum_linkrate = SAS_LINK_RATE_UNKNOWN;
9553 phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
9555 rc = sas_phy_add(hpsa_sas_phy->phy);
9559 sas_port_add_phy(hpsa_sas_port->port, hpsa_sas_phy->phy);
9560 list_add_tail(&hpsa_sas_phy->phy_list_entry,
9561 &hpsa_sas_port->phy_list_head);
9562 hpsa_sas_phy->added_to_port = true;
9568 hpsa_sas_port_add_rphy(struct hpsa_sas_port *hpsa_sas_port,
9569 struct sas_rphy *rphy)
9571 struct sas_identify *identify;
9573 identify = &rphy->identify;
9574 identify->sas_address = hpsa_sas_port->sas_address;
9575 identify->initiator_port_protocols = SAS_PROTOCOL_STP;
9576 identify->target_port_protocols = SAS_PROTOCOL_STP;
9578 return sas_rphy_add(rphy);
9581 static struct hpsa_sas_port
9582 *hpsa_alloc_sas_port(struct hpsa_sas_node *hpsa_sas_node,
9586 struct hpsa_sas_port *hpsa_sas_port;
9587 struct sas_port *port;
9589 hpsa_sas_port = kzalloc(sizeof(*hpsa_sas_port), GFP_KERNEL);
9593 INIT_LIST_HEAD(&hpsa_sas_port->phy_list_head);
9594 hpsa_sas_port->parent_node = hpsa_sas_node;
9596 port = sas_port_alloc_num(hpsa_sas_node->parent_dev);
9598 goto free_hpsa_port;
9600 rc = sas_port_add(port);
9604 hpsa_sas_port->port = port;
9605 hpsa_sas_port->sas_address = sas_address;
9606 list_add_tail(&hpsa_sas_port->port_list_entry,
9607 &hpsa_sas_node->port_list_head);
9609 return hpsa_sas_port;
9612 sas_port_free(port);
9614 kfree(hpsa_sas_port);
9619 static void hpsa_free_sas_port(struct hpsa_sas_port *hpsa_sas_port)
9621 struct hpsa_sas_phy *hpsa_sas_phy;
9622 struct hpsa_sas_phy *next;
9624 list_for_each_entry_safe(hpsa_sas_phy, next,
9625 &hpsa_sas_port->phy_list_head, phy_list_entry)
9626 hpsa_free_sas_phy(hpsa_sas_phy);
9628 sas_port_delete(hpsa_sas_port->port);
9629 list_del(&hpsa_sas_port->port_list_entry);
9630 kfree(hpsa_sas_port);
9633 static struct hpsa_sas_node *hpsa_alloc_sas_node(struct device *parent_dev)
9635 struct hpsa_sas_node *hpsa_sas_node;
9637 hpsa_sas_node = kzalloc(sizeof(*hpsa_sas_node), GFP_KERNEL);
9638 if (hpsa_sas_node) {
9639 hpsa_sas_node->parent_dev = parent_dev;
9640 INIT_LIST_HEAD(&hpsa_sas_node->port_list_head);
9643 return hpsa_sas_node;
9646 static void hpsa_free_sas_node(struct hpsa_sas_node *hpsa_sas_node)
9648 struct hpsa_sas_port *hpsa_sas_port;
9649 struct hpsa_sas_port *next;
9654 list_for_each_entry_safe(hpsa_sas_port, next,
9655 &hpsa_sas_node->port_list_head, port_list_entry)
9656 hpsa_free_sas_port(hpsa_sas_port);
9658 kfree(hpsa_sas_node);
9661 static struct hpsa_scsi_dev_t
9662 *hpsa_find_device_by_sas_rphy(struct ctlr_info *h,
9663 struct sas_rphy *rphy)
9666 struct hpsa_scsi_dev_t *device;
9668 for (i = 0; i < h->ndevices; i++) {
9670 if (!device->sas_port)
9672 if (device->sas_port->rphy == rphy)
9679 static int hpsa_add_sas_host(struct ctlr_info *h)
9682 struct device *parent_dev;
9683 struct hpsa_sas_node *hpsa_sas_node;
9684 struct hpsa_sas_port *hpsa_sas_port;
9685 struct hpsa_sas_phy *hpsa_sas_phy;
9687 parent_dev = &h->scsi_host->shost_dev;
9689 hpsa_sas_node = hpsa_alloc_sas_node(parent_dev);
9693 hpsa_sas_port = hpsa_alloc_sas_port(hpsa_sas_node, h->sas_address);
9694 if (!hpsa_sas_port) {
9699 hpsa_sas_phy = hpsa_alloc_sas_phy(hpsa_sas_port);
9700 if (!hpsa_sas_phy) {
9705 rc = hpsa_sas_port_add_phy(hpsa_sas_phy);
9709 h->sas_host = hpsa_sas_node;
9714 hpsa_free_sas_phy(hpsa_sas_phy);
9716 hpsa_free_sas_port(hpsa_sas_port);
9718 hpsa_free_sas_node(hpsa_sas_node);
9723 static void hpsa_delete_sas_host(struct ctlr_info *h)
9725 hpsa_free_sas_node(h->sas_host);
9728 static int hpsa_add_sas_device(struct hpsa_sas_node *hpsa_sas_node,
9729 struct hpsa_scsi_dev_t *device)
9732 struct hpsa_sas_port *hpsa_sas_port;
9733 struct sas_rphy *rphy;
9735 hpsa_sas_port = hpsa_alloc_sas_port(hpsa_sas_node, device->sas_address);
9739 rphy = sas_end_device_alloc(hpsa_sas_port->port);
9745 hpsa_sas_port->rphy = rphy;
9746 device->sas_port = hpsa_sas_port;
9748 rc = hpsa_sas_port_add_rphy(hpsa_sas_port, rphy);
9755 hpsa_free_sas_port(hpsa_sas_port);
9756 device->sas_port = NULL;
9761 static void hpsa_remove_sas_device(struct hpsa_scsi_dev_t *device)
9763 if (device->sas_port) {
9764 hpsa_free_sas_port(device->sas_port);
9765 device->sas_port = NULL;
9770 hpsa_sas_get_linkerrors(struct sas_phy *phy)
9776 hpsa_sas_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
9778 struct Scsi_Host *shost = phy_to_shost(rphy);
9779 struct ctlr_info *h;
9780 struct hpsa_scsi_dev_t *sd;
9785 h = shost_to_hba(shost);
9790 sd = hpsa_find_device_by_sas_rphy(h, rphy);
9794 *identifier = sd->eli;
9800 hpsa_sas_get_bay_identifier(struct sas_rphy *rphy)
9806 hpsa_sas_phy_reset(struct sas_phy *phy, int hard_reset)
9812 hpsa_sas_phy_enable(struct sas_phy *phy, int enable)
9818 hpsa_sas_phy_setup(struct sas_phy *phy)
9824 hpsa_sas_phy_release(struct sas_phy *phy)
9829 hpsa_sas_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates)
9834 static struct sas_function_template hpsa_sas_transport_functions = {
9835 .get_linkerrors = hpsa_sas_get_linkerrors,
9836 .get_enclosure_identifier = hpsa_sas_get_enclosure_identifier,
9837 .get_bay_identifier = hpsa_sas_get_bay_identifier,
9838 .phy_reset = hpsa_sas_phy_reset,
9839 .phy_enable = hpsa_sas_phy_enable,
9840 .phy_setup = hpsa_sas_phy_setup,
9841 .phy_release = hpsa_sas_phy_release,
9842 .set_phy_speed = hpsa_sas_phy_speed,
9846 * This is it. Register the PCI driver information for the cards we control
9847 * the OS will call our registered routines when it finds one of our cards.
9849 static int __init hpsa_init(void)
9853 hpsa_sas_transport_template =
9854 sas_attach_transport(&hpsa_sas_transport_functions);
9855 if (!hpsa_sas_transport_template)
9858 rc = pci_register_driver(&hpsa_pci_driver);
9861 sas_release_transport(hpsa_sas_transport_template);
9866 static void __exit hpsa_cleanup(void)
9868 pci_unregister_driver(&hpsa_pci_driver);
9869 sas_release_transport(hpsa_sas_transport_template);
9872 static void __attribute__((unused)) verify_offsets(void)
9874 #define VERIFY_OFFSET(member, offset) \
9875 BUILD_BUG_ON(offsetof(struct raid_map_data, member) != offset)
9877 VERIFY_OFFSET(structure_size, 0);
9878 VERIFY_OFFSET(volume_blk_size, 4);
9879 VERIFY_OFFSET(volume_blk_cnt, 8);
9880 VERIFY_OFFSET(phys_blk_shift, 16);
9881 VERIFY_OFFSET(parity_rotation_shift, 17);
9882 VERIFY_OFFSET(strip_size, 18);
9883 VERIFY_OFFSET(disk_starting_blk, 20);
9884 VERIFY_OFFSET(disk_blk_cnt, 28);
9885 VERIFY_OFFSET(data_disks_per_row, 36);
9886 VERIFY_OFFSET(metadata_disks_per_row, 38);
9887 VERIFY_OFFSET(row_cnt, 40);
9888 VERIFY_OFFSET(layout_map_count, 42);
9889 VERIFY_OFFSET(flags, 44);
9890 VERIFY_OFFSET(dekindex, 46);
9891 /* VERIFY_OFFSET(reserved, 48 */
9892 VERIFY_OFFSET(data, 64);
9894 #undef VERIFY_OFFSET
9896 #define VERIFY_OFFSET(member, offset) \
9897 BUILD_BUG_ON(offsetof(struct io_accel2_cmd, member) != offset)
9899 VERIFY_OFFSET(IU_type, 0);
9900 VERIFY_OFFSET(direction, 1);
9901 VERIFY_OFFSET(reply_queue, 2);
9902 /* VERIFY_OFFSET(reserved1, 3); */
9903 VERIFY_OFFSET(scsi_nexus, 4);
9904 VERIFY_OFFSET(Tag, 8);
9905 VERIFY_OFFSET(cdb, 16);
9906 VERIFY_OFFSET(cciss_lun, 32);
9907 VERIFY_OFFSET(data_len, 40);
9908 VERIFY_OFFSET(cmd_priority_task_attr, 44);
9909 VERIFY_OFFSET(sg_count, 45);
9910 /* VERIFY_OFFSET(reserved3 */
9911 VERIFY_OFFSET(err_ptr, 48);
9912 VERIFY_OFFSET(err_len, 56);
9913 /* VERIFY_OFFSET(reserved4 */
9914 VERIFY_OFFSET(sg, 64);
9916 #undef VERIFY_OFFSET
9918 #define VERIFY_OFFSET(member, offset) \
9919 BUILD_BUG_ON(offsetof(struct io_accel1_cmd, member) != offset)
9921 VERIFY_OFFSET(dev_handle, 0x00);
9922 VERIFY_OFFSET(reserved1, 0x02);
9923 VERIFY_OFFSET(function, 0x03);
9924 VERIFY_OFFSET(reserved2, 0x04);
9925 VERIFY_OFFSET(err_info, 0x0C);
9926 VERIFY_OFFSET(reserved3, 0x10);
9927 VERIFY_OFFSET(err_info_len, 0x12);
9928 VERIFY_OFFSET(reserved4, 0x13);
9929 VERIFY_OFFSET(sgl_offset, 0x14);
9930 VERIFY_OFFSET(reserved5, 0x15);
9931 VERIFY_OFFSET(transfer_len, 0x1C);
9932 VERIFY_OFFSET(reserved6, 0x20);
9933 VERIFY_OFFSET(io_flags, 0x24);
9934 VERIFY_OFFSET(reserved7, 0x26);
9935 VERIFY_OFFSET(LUN, 0x34);
9936 VERIFY_OFFSET(control, 0x3C);
9937 VERIFY_OFFSET(CDB, 0x40);
9938 VERIFY_OFFSET(reserved8, 0x50);
9939 VERIFY_OFFSET(host_context_flags, 0x60);
9940 VERIFY_OFFSET(timeout_sec, 0x62);
9941 VERIFY_OFFSET(ReplyQueue, 0x64);
9942 VERIFY_OFFSET(reserved9, 0x65);
9943 VERIFY_OFFSET(tag, 0x68);
9944 VERIFY_OFFSET(host_addr, 0x70);
9945 VERIFY_OFFSET(CISS_LUN, 0x78);
9946 VERIFY_OFFSET(SG, 0x78 + 8);
9947 #undef VERIFY_OFFSET
9950 module_init(hpsa_init);
9951 module_exit(hpsa_cleanup);