Merge tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux...
[linux-2.6-microblaze.git] / drivers / input / misc / pm8941-pwrkey.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (c) 2010-2011, 2020-2021, The Linux Foundation. All rights reserved.
4  * Copyright (c) 2014, Sony Mobile Communications Inc.
5  */
6
7 #include <linux/delay.h>
8 #include <linux/errno.h>
9 #include <linux/input.h>
10 #include <linux/interrupt.h>
11 #include <linux/kernel.h>
12 #include <linux/log2.h>
13 #include <linux/module.h>
14 #include <linux/of.h>
15 #include <linux/of_device.h>
16 #include <linux/platform_device.h>
17 #include <linux/reboot.h>
18 #include <linux/regmap.h>
19
20 #define PON_REV2                        0x01
21
22 #define PON_RT_STS                      0x10
23 #define  PON_KPDPWR_N_SET               BIT(0)
24 #define  PON_RESIN_N_SET                BIT(1)
25 #define  PON_GEN3_RESIN_N_SET           BIT(6)
26 #define  PON_GEN3_KPDPWR_N_SET          BIT(7)
27
28 #define PON_PS_HOLD_RST_CTL             0x5a
29 #define PON_PS_HOLD_RST_CTL2            0x5b
30 #define  PON_PS_HOLD_ENABLE             BIT(7)
31 #define  PON_PS_HOLD_TYPE_MASK          0x0f
32 #define  PON_PS_HOLD_TYPE_SHUTDOWN      4
33 #define  PON_PS_HOLD_TYPE_HARD_RESET    7
34
35 #define PON_PULL_CTL                    0x70
36 #define  PON_KPDPWR_PULL_UP             BIT(1)
37 #define  PON_RESIN_PULL_UP              BIT(0)
38
39 #define PON_DBC_CTL                     0x71
40 #define  PON_DBC_DELAY_MASK             0x7
41
42 struct pm8941_data {
43         unsigned int    pull_up_bit;
44         unsigned int    status_bit;
45         bool            supports_ps_hold_poff_config;
46         bool            supports_debounce_config;
47         const char      *name;
48         const char      *phys;
49 };
50
51 struct pm8941_pwrkey {
52         struct device *dev;
53         int irq;
54         u32 baseaddr;
55         struct regmap *regmap;
56         struct input_dev *input;
57
58         unsigned int revision;
59         struct notifier_block reboot_notifier;
60
61         u32 code;
62         const struct pm8941_data *data;
63 };
64
65 static int pm8941_reboot_notify(struct notifier_block *nb,
66                                 unsigned long code, void *unused)
67 {
68         struct pm8941_pwrkey *pwrkey = container_of(nb, struct pm8941_pwrkey,
69                                                     reboot_notifier);
70         unsigned int enable_reg;
71         unsigned int reset_type;
72         int error;
73
74         /* PMICs with revision 0 have the enable bit in same register as ctrl */
75         if (pwrkey->revision == 0)
76                 enable_reg = PON_PS_HOLD_RST_CTL;
77         else
78                 enable_reg = PON_PS_HOLD_RST_CTL2;
79
80         error = regmap_update_bits(pwrkey->regmap,
81                                    pwrkey->baseaddr + enable_reg,
82                                    PON_PS_HOLD_ENABLE,
83                                    0);
84         if (error)
85                 dev_err(pwrkey->dev,
86                         "unable to clear ps hold reset enable: %d\n",
87                         error);
88
89         /*
90          * Updates of PON_PS_HOLD_ENABLE requires 3 sleep cycles between
91          * writes.
92          */
93         usleep_range(100, 1000);
94
95         switch (code) {
96         case SYS_HALT:
97         case SYS_POWER_OFF:
98                 reset_type = PON_PS_HOLD_TYPE_SHUTDOWN;
99                 break;
100         case SYS_RESTART:
101         default:
102                 reset_type = PON_PS_HOLD_TYPE_HARD_RESET;
103                 break;
104         }
105
106         error = regmap_update_bits(pwrkey->regmap,
107                                    pwrkey->baseaddr + PON_PS_HOLD_RST_CTL,
108                                    PON_PS_HOLD_TYPE_MASK,
109                                    reset_type);
110         if (error)
111                 dev_err(pwrkey->dev, "unable to set ps hold reset type: %d\n",
112                         error);
113
114         error = regmap_update_bits(pwrkey->regmap,
115                                    pwrkey->baseaddr + enable_reg,
116                                    PON_PS_HOLD_ENABLE,
117                                    PON_PS_HOLD_ENABLE);
118         if (error)
119                 dev_err(pwrkey->dev, "unable to re-set enable: %d\n", error);
120
121         return NOTIFY_DONE;
122 }
123
124 static irqreturn_t pm8941_pwrkey_irq(int irq, void *_data)
125 {
126         struct pm8941_pwrkey *pwrkey = _data;
127         unsigned int sts;
128         int error;
129
130         error = regmap_read(pwrkey->regmap,
131                             pwrkey->baseaddr + PON_RT_STS, &sts);
132         if (error)
133                 return IRQ_HANDLED;
134
135         input_report_key(pwrkey->input, pwrkey->code,
136                          sts & pwrkey->data->status_bit);
137         input_sync(pwrkey->input);
138
139         return IRQ_HANDLED;
140 }
141
142 static int __maybe_unused pm8941_pwrkey_suspend(struct device *dev)
143 {
144         struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
145
146         if (device_may_wakeup(dev))
147                 enable_irq_wake(pwrkey->irq);
148
149         return 0;
150 }
151
152 static int __maybe_unused pm8941_pwrkey_resume(struct device *dev)
153 {
154         struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
155
156         if (device_may_wakeup(dev))
157                 disable_irq_wake(pwrkey->irq);
158
159         return 0;
160 }
161
162 static SIMPLE_DEV_PM_OPS(pm8941_pwr_key_pm_ops,
163                          pm8941_pwrkey_suspend, pm8941_pwrkey_resume);
164
165 static int pm8941_pwrkey_probe(struct platform_device *pdev)
166 {
167         struct pm8941_pwrkey *pwrkey;
168         bool pull_up;
169         struct device *parent;
170         u32 req_delay;
171         int error;
172
173         if (of_property_read_u32(pdev->dev.of_node, "debounce", &req_delay))
174                 req_delay = 15625;
175
176         if (req_delay > 2000000 || req_delay == 0) {
177                 dev_err(&pdev->dev, "invalid debounce time: %u\n", req_delay);
178                 return -EINVAL;
179         }
180
181         pull_up = of_property_read_bool(pdev->dev.of_node, "bias-pull-up");
182
183         pwrkey = devm_kzalloc(&pdev->dev, sizeof(*pwrkey), GFP_KERNEL);
184         if (!pwrkey)
185                 return -ENOMEM;
186
187         pwrkey->dev = &pdev->dev;
188         pwrkey->data = of_device_get_match_data(&pdev->dev);
189
190         parent = pdev->dev.parent;
191         pwrkey->regmap = dev_get_regmap(parent, NULL);
192         if (!pwrkey->regmap) {
193                 /*
194                  * We failed to get regmap for parent. Let's see if we are
195                  * a child of pon node and read regmap and reg from its
196                  * parent.
197                  */
198                 pwrkey->regmap = dev_get_regmap(parent->parent, NULL);
199                 if (!pwrkey->regmap) {
200                         dev_err(&pdev->dev, "failed to locate regmap\n");
201                         return -ENODEV;
202                 }
203
204                 error = of_property_read_u32(parent->of_node,
205                                              "reg", &pwrkey->baseaddr);
206         } else {
207                 error = of_property_read_u32(pdev->dev.of_node, "reg",
208                                              &pwrkey->baseaddr);
209         }
210         if (error)
211                 return error;
212
213         pwrkey->irq = platform_get_irq(pdev, 0);
214         if (pwrkey->irq < 0)
215                 return pwrkey->irq;
216
217         error = regmap_read(pwrkey->regmap, pwrkey->baseaddr + PON_REV2,
218                             &pwrkey->revision);
219         if (error) {
220                 dev_err(&pdev->dev, "failed to set debounce: %d\n", error);
221                 return error;
222         }
223
224         error = of_property_read_u32(pdev->dev.of_node, "linux,code",
225                                      &pwrkey->code);
226         if (error) {
227                 dev_dbg(&pdev->dev,
228                         "no linux,code assuming power (%d)\n", error);
229                 pwrkey->code = KEY_POWER;
230         }
231
232         pwrkey->input = devm_input_allocate_device(&pdev->dev);
233         if (!pwrkey->input) {
234                 dev_dbg(&pdev->dev, "unable to allocate input device\n");
235                 return -ENOMEM;
236         }
237
238         input_set_capability(pwrkey->input, EV_KEY, pwrkey->code);
239
240         pwrkey->input->name = pwrkey->data->name;
241         pwrkey->input->phys = pwrkey->data->phys;
242
243         if (pwrkey->data->supports_debounce_config) {
244                 req_delay = (req_delay << 6) / USEC_PER_SEC;
245                 req_delay = ilog2(req_delay);
246
247                 error = regmap_update_bits(pwrkey->regmap,
248                                            pwrkey->baseaddr + PON_DBC_CTL,
249                                            PON_DBC_DELAY_MASK,
250                                            req_delay);
251                 if (error) {
252                         dev_err(&pdev->dev, "failed to set debounce: %d\n",
253                                 error);
254                         return error;
255                 }
256         }
257
258         if (pwrkey->data->pull_up_bit) {
259                 error = regmap_update_bits(pwrkey->regmap,
260                                            pwrkey->baseaddr + PON_PULL_CTL,
261                                            pwrkey->data->pull_up_bit,
262                                            pull_up ? pwrkey->data->pull_up_bit :
263                                                      0);
264                 if (error) {
265                         dev_err(&pdev->dev, "failed to set pull: %d\n", error);
266                         return error;
267                 }
268         }
269
270         error = devm_request_threaded_irq(&pdev->dev, pwrkey->irq,
271                                           NULL, pm8941_pwrkey_irq,
272                                           IRQF_ONESHOT,
273                                           pwrkey->data->name, pwrkey);
274         if (error) {
275                 dev_err(&pdev->dev, "failed requesting IRQ: %d\n", error);
276                 return error;
277         }
278
279         error = input_register_device(pwrkey->input);
280         if (error) {
281                 dev_err(&pdev->dev, "failed to register input device: %d\n",
282                         error);
283                 return error;
284         }
285
286         if (pwrkey->data->supports_ps_hold_poff_config) {
287                 pwrkey->reboot_notifier.notifier_call = pm8941_reboot_notify;
288                 error = register_reboot_notifier(&pwrkey->reboot_notifier);
289                 if (error) {
290                         dev_err(&pdev->dev, "failed to register reboot notifier: %d\n",
291                                 error);
292                         return error;
293                 }
294         }
295
296         platform_set_drvdata(pdev, pwrkey);
297         device_init_wakeup(&pdev->dev, 1);
298
299         return 0;
300 }
301
302 static int pm8941_pwrkey_remove(struct platform_device *pdev)
303 {
304         struct pm8941_pwrkey *pwrkey = platform_get_drvdata(pdev);
305
306         if (pwrkey->data->supports_ps_hold_poff_config)
307                 unregister_reboot_notifier(&pwrkey->reboot_notifier);
308
309         return 0;
310 }
311
312 static const struct pm8941_data pwrkey_data = {
313         .pull_up_bit = PON_KPDPWR_PULL_UP,
314         .status_bit = PON_KPDPWR_N_SET,
315         .name = "pm8941_pwrkey",
316         .phys = "pm8941_pwrkey/input0",
317         .supports_ps_hold_poff_config = true,
318         .supports_debounce_config = true,
319 };
320
321 static const struct pm8941_data resin_data = {
322         .pull_up_bit = PON_RESIN_PULL_UP,
323         .status_bit = PON_RESIN_N_SET,
324         .name = "pm8941_resin",
325         .phys = "pm8941_resin/input0",
326         .supports_ps_hold_poff_config = true,
327         .supports_debounce_config = true,
328 };
329
330 static const struct pm8941_data pon_gen3_pwrkey_data = {
331         .status_bit = PON_GEN3_KPDPWR_N_SET,
332         .name = "pmic_pwrkey",
333         .phys = "pmic_pwrkey/input0",
334         .supports_ps_hold_poff_config = false,
335         .supports_debounce_config = false,
336 };
337
338 static const struct pm8941_data pon_gen3_resin_data = {
339         .status_bit = PON_GEN3_RESIN_N_SET,
340         .name = "pmic_resin",
341         .phys = "pmic_resin/input0",
342         .supports_ps_hold_poff_config = false,
343         .supports_debounce_config = false,
344 };
345
346 static const struct of_device_id pm8941_pwr_key_id_table[] = {
347         { .compatible = "qcom,pm8941-pwrkey", .data = &pwrkey_data },
348         { .compatible = "qcom,pm8941-resin", .data = &resin_data },
349         { .compatible = "qcom,pmk8350-pwrkey", .data = &pon_gen3_pwrkey_data },
350         { .compatible = "qcom,pmk8350-resin", .data = &pon_gen3_resin_data },
351         { }
352 };
353 MODULE_DEVICE_TABLE(of, pm8941_pwr_key_id_table);
354
355 static struct platform_driver pm8941_pwrkey_driver = {
356         .probe = pm8941_pwrkey_probe,
357         .remove = pm8941_pwrkey_remove,
358         .driver = {
359                 .name = "pm8941-pwrkey",
360                 .pm = &pm8941_pwr_key_pm_ops,
361                 .of_match_table = of_match_ptr(pm8941_pwr_key_id_table),
362         },
363 };
364 module_platform_driver(pm8941_pwrkey_driver);
365
366 MODULE_DESCRIPTION("PM8941 Power Key driver");
367 MODULE_LICENSE("GPL v2");