Merge tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
[linux-2.6-microblaze.git] / arch / x86 / include / asm / thread_info.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /* thread_info.h: low-level thread information
3  *
4  * Copyright (C) 2002  David Howells (dhowells@redhat.com)
5  * - Incorporating suggestions made by Linus Torvalds and Dave Miller
6  */
7
8 #ifndef _ASM_X86_THREAD_INFO_H
9 #define _ASM_X86_THREAD_INFO_H
10
11 #include <linux/compiler.h>
12 #include <asm/page.h>
13 #include <asm/percpu.h>
14 #include <asm/types.h>
15
16 /*
17  * TOP_OF_KERNEL_STACK_PADDING is a number of unused bytes that we
18  * reserve at the top of the kernel stack.  We do it because of a nasty
19  * 32-bit corner case.  On x86_32, the hardware stack frame is
20  * variable-length.  Except for vm86 mode, struct pt_regs assumes a
21  * maximum-length frame.  If we enter from CPL 0, the top 8 bytes of
22  * pt_regs don't actually exist.  Ordinarily this doesn't matter, but it
23  * does in at least one case:
24  *
25  * If we take an NMI early enough in SYSENTER, then we can end up with
26  * pt_regs that extends above sp0.  On the way out, in the espfix code,
27  * we can read the saved SS value, but that value will be above sp0.
28  * Without this offset, that can result in a page fault.  (We are
29  * careful that, in this case, the value we read doesn't matter.)
30  *
31  * In vm86 mode, the hardware frame is much longer still, so add 16
32  * bytes to make room for the real-mode segments.
33  *
34  * x86_64 has a fixed-length stack frame.
35  */
36 #ifdef CONFIG_X86_32
37 # ifdef CONFIG_VM86
38 #  define TOP_OF_KERNEL_STACK_PADDING 16
39 # else
40 #  define TOP_OF_KERNEL_STACK_PADDING 8
41 # endif
42 #else
43 # define TOP_OF_KERNEL_STACK_PADDING 0
44 #endif
45
46 /*
47  * low level task data that entry.S needs immediate access to
48  * - this struct should fit entirely inside of one cache line
49  * - this struct shares the supervisor stack pages
50  */
51 #ifndef __ASSEMBLY__
52 struct task_struct;
53 #include <asm/cpufeature.h>
54 #include <linux/atomic.h>
55
56 struct thread_info {
57         unsigned long           flags;          /* low level flags */
58         unsigned long           syscall_work;   /* SYSCALL_WORK_ flags */
59         u32                     status;         /* thread synchronous flags */
60 };
61
62 #define INIT_THREAD_INFO(tsk)                   \
63 {                                               \
64         .flags          = 0,                    \
65 }
66
67 #else /* !__ASSEMBLY__ */
68
69 #include <asm/asm-offsets.h>
70
71 #endif
72
73 /*
74  * thread information flags
75  * - these are process state flags that various assembly files
76  *   may need to access
77  */
78 #define TIF_NOTIFY_RESUME       1       /* callback before returning to user */
79 #define TIF_SIGPENDING          2       /* signal pending */
80 #define TIF_NEED_RESCHED        3       /* rescheduling necessary */
81 #define TIF_SINGLESTEP          4       /* reenable singlestep on user return*/
82 #define TIF_SSBD                5       /* Speculative store bypass disable */
83 #define TIF_SPEC_IB             9       /* Indirect branch speculation mitigation */
84 #define TIF_SPEC_L1D_FLUSH      10      /* Flush L1D on mm switches (processes) */
85 #define TIF_USER_RETURN_NOTIFY  11      /* notify kernel of userspace return */
86 #define TIF_UPROBE              12      /* breakpointed or singlestepping */
87 #define TIF_PATCH_PENDING       13      /* pending live patching update */
88 #define TIF_NEED_FPU_LOAD       14      /* load FPU on return to userspace */
89 #define TIF_NOCPUID             15      /* CPUID is not accessible in userland */
90 #define TIF_NOTSC               16      /* TSC is not accessible in userland */
91 #define TIF_NOTIFY_SIGNAL       17      /* signal notifications exist */
92 #define TIF_SLD                 18      /* Restore split lock detection on context switch */
93 #define TIF_MEMDIE              20      /* is terminating due to OOM killer */
94 #define TIF_POLLING_NRFLAG      21      /* idle is polling for TIF_NEED_RESCHED */
95 #define TIF_IO_BITMAP           22      /* uses I/O bitmap */
96 #define TIF_SPEC_FORCE_UPDATE   23      /* Force speculation MSR update in context switch */
97 #define TIF_FORCED_TF           24      /* true if TF in eflags artificially */
98 #define TIF_BLOCKSTEP           25      /* set when we want DEBUGCTLMSR_BTF */
99 #define TIF_LAZY_MMU_UPDATES    27      /* task is updating the mmu lazily */
100 #define TIF_ADDR32              29      /* 32-bit address space on 64 bits */
101
102 #define _TIF_NOTIFY_RESUME      (1 << TIF_NOTIFY_RESUME)
103 #define _TIF_SIGPENDING         (1 << TIF_SIGPENDING)
104 #define _TIF_NEED_RESCHED       (1 << TIF_NEED_RESCHED)
105 #define _TIF_SINGLESTEP         (1 << TIF_SINGLESTEP)
106 #define _TIF_SSBD               (1 << TIF_SSBD)
107 #define _TIF_SPEC_IB            (1 << TIF_SPEC_IB)
108 #define _TIF_SPEC_L1D_FLUSH     (1 << TIF_SPEC_L1D_FLUSH)
109 #define _TIF_USER_RETURN_NOTIFY (1 << TIF_USER_RETURN_NOTIFY)
110 #define _TIF_UPROBE             (1 << TIF_UPROBE)
111 #define _TIF_PATCH_PENDING      (1 << TIF_PATCH_PENDING)
112 #define _TIF_NEED_FPU_LOAD      (1 << TIF_NEED_FPU_LOAD)
113 #define _TIF_NOCPUID            (1 << TIF_NOCPUID)
114 #define _TIF_NOTSC              (1 << TIF_NOTSC)
115 #define _TIF_NOTIFY_SIGNAL      (1 << TIF_NOTIFY_SIGNAL)
116 #define _TIF_SLD                (1 << TIF_SLD)
117 #define _TIF_POLLING_NRFLAG     (1 << TIF_POLLING_NRFLAG)
118 #define _TIF_IO_BITMAP          (1 << TIF_IO_BITMAP)
119 #define _TIF_SPEC_FORCE_UPDATE  (1 << TIF_SPEC_FORCE_UPDATE)
120 #define _TIF_FORCED_TF          (1 << TIF_FORCED_TF)
121 #define _TIF_BLOCKSTEP          (1 << TIF_BLOCKSTEP)
122 #define _TIF_LAZY_MMU_UPDATES   (1 << TIF_LAZY_MMU_UPDATES)
123 #define _TIF_ADDR32             (1 << TIF_ADDR32)
124
125 /* flags to check in __switch_to() */
126 #define _TIF_WORK_CTXSW_BASE                                    \
127         (_TIF_NOCPUID | _TIF_NOTSC | _TIF_BLOCKSTEP |           \
128          _TIF_SSBD | _TIF_SPEC_FORCE_UPDATE | _TIF_SLD)
129
130 /*
131  * Avoid calls to __switch_to_xtra() on UP as STIBP is not evaluated.
132  */
133 #ifdef CONFIG_SMP
134 # define _TIF_WORK_CTXSW        (_TIF_WORK_CTXSW_BASE | _TIF_SPEC_IB)
135 #else
136 # define _TIF_WORK_CTXSW        (_TIF_WORK_CTXSW_BASE)
137 #endif
138
139 #ifdef CONFIG_X86_IOPL_IOPERM
140 # define _TIF_WORK_CTXSW_PREV   (_TIF_WORK_CTXSW| _TIF_USER_RETURN_NOTIFY | \
141                                  _TIF_IO_BITMAP)
142 #else
143 # define _TIF_WORK_CTXSW_PREV   (_TIF_WORK_CTXSW| _TIF_USER_RETURN_NOTIFY)
144 #endif
145
146 #define _TIF_WORK_CTXSW_NEXT    (_TIF_WORK_CTXSW)
147
148 #define STACK_WARN              (THREAD_SIZE/8)
149
150 /*
151  * macros/functions for gaining access to the thread information structure
152  *
153  * preempt_count needs to be 1 initially, until the scheduler is functional.
154  */
155 #ifndef __ASSEMBLY__
156
157 /*
158  * Walks up the stack frames to make sure that the specified object is
159  * entirely contained by a single stack frame.
160  *
161  * Returns:
162  *      GOOD_FRAME      if within a frame
163  *      BAD_STACK       if placed across a frame boundary (or outside stack)
164  *      NOT_STACK       unable to determine (no frame pointers, etc)
165  */
166 static inline int arch_within_stack_frames(const void * const stack,
167                                            const void * const stackend,
168                                            const void *obj, unsigned long len)
169 {
170 #if defined(CONFIG_FRAME_POINTER)
171         const void *frame = NULL;
172         const void *oldframe;
173
174         oldframe = __builtin_frame_address(1);
175         if (oldframe)
176                 frame = __builtin_frame_address(2);
177         /*
178          * low ----------------------------------------------> high
179          * [saved bp][saved ip][args][local vars][saved bp][saved ip]
180          *                     ^----------------^
181          *               allow copies only within here
182          */
183         while (stack <= frame && frame < stackend) {
184                 /*
185                  * If obj + len extends past the last frame, this
186                  * check won't pass and the next frame will be 0,
187                  * causing us to bail out and correctly report
188                  * the copy as invalid.
189                  */
190                 if (obj + len <= frame)
191                         return obj >= oldframe + 2 * sizeof(void *) ?
192                                 GOOD_FRAME : BAD_STACK;
193                 oldframe = frame;
194                 frame = *(const void * const *)frame;
195         }
196         return BAD_STACK;
197 #else
198         return NOT_STACK;
199 #endif
200 }
201
202 #endif  /* !__ASSEMBLY__ */
203
204 /*
205  * Thread-synchronous status.
206  *
207  * This is different from the flags in that nobody else
208  * ever touches our thread-synchronous status, so we don't
209  * have to worry about atomic accesses.
210  */
211 #define TS_COMPAT               0x0002  /* 32bit syscall active (64BIT)*/
212
213 #ifndef __ASSEMBLY__
214 #ifdef CONFIG_COMPAT
215 #define TS_I386_REGS_POKED      0x0004  /* regs poked by 32-bit ptracer */
216
217 #define arch_set_restart_data(restart)  \
218         do { restart->arch_data = current_thread_info()->status; } while (0)
219
220 #endif
221
222 #ifdef CONFIG_X86_32
223 #define in_ia32_syscall() true
224 #else
225 #define in_ia32_syscall() (IS_ENABLED(CONFIG_IA32_EMULATION) && \
226                            current_thread_info()->status & TS_COMPAT)
227 #endif
228
229 extern void arch_task_cache_init(void);
230 extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
231 extern void arch_release_task_struct(struct task_struct *tsk);
232 extern void arch_setup_new_exec(void);
233 #define arch_setup_new_exec arch_setup_new_exec
234 #endif  /* !__ASSEMBLY__ */
235
236 #endif /* _ASM_X86_THREAD_INFO_H */