arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Device Tree Source for the RZ/G2[HMN] HiHope sub board common parts
   4  *
   5  * Copyright (C) 2019 Renesas Electronics Corp.
   6  */
   7
   8 / {
   9         aliases {
  10                 ethernet0 = &avb;
  11         };
  12
  13         chosen {
  14                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
  15         };
  16 };
  17
  18 &avb {
  19         pinctrl-0 = <&avb_pins>;
  20         pinctrl-names = "default";
  21         phy-handle = <&phy0>;
  22         tx-internal-delay-ps = <2000>;
  23         rx-internal-delay-ps = <1800>;
  24         status = "okay";
  25
  26         phy0: ethernet-phy@0 {
  27                 reg = <0>;
  28                 interrupt-parent = <&gpio2>;
  29                 interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
  30                 reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
  31         };
  32 };
  33
  34 &can0 {
  35         pinctrl-0 = <&can0_pins>;
  36         pinctrl-names = "default";
  37         status = "okay";
  38 };
  39
  40 &can1 {
  41         pinctrl-0 = <&can1_pins>;
  42         pinctrl-names = "default";
  43         status = "okay";
  44 };
  45
  46 &pciec0 {
  47         status = "okay";
  48 };
  49
  50 &pfc {
  51         pinctrl-0 = <&scif_clk_pins>;
  52         pinctrl-names = "default";
  53
  54         avb_pins: avb {
  55                 mux {
  56                         groups = "avb_link", "avb_mdio", "avb_mii";
  57                         function = "avb";
  58                 };
  59
  60                 pins_mdio {
  61                         groups = "avb_mdio";
  62                         drive-strength = <24>;
  63                 };
  64
  65                 pins_mii_tx {
  66                         pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
  67                                "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
  68                         drive-strength = <12>;
  69                 };
  70         };
  71
  72         can0_pins: can0 {
  73                 groups = "can0_data_a";
  74                 function = "can0";
  75         };
  76
  77         can1_pins: can1 {
  78                 groups = "can1_data";
  79                 function = "can1";
  80         };
  81
  82         pwm0_pins: pwm0 {
  83                 groups = "pwm0";
  84                 function = "pwm0";
  85         };
  86 };
  87
  88 &pwm0 {
  89         pinctrl-0 = <&pwm0_pins>;
  90         pinctrl-names = "default";
  91
  92         status = "okay";
  93 };