arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright 2020, Compass Electronics Group, LLC
   4  */
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8 #include <dt-bindings/clk/versaclock.h>
   9
  10 / {
  11         backlight_lvds: backlight-lvds {
  12                 compatible = "pwm-backlight";
  13                 power-supply = <&reg_lcd>;
  14                 enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_HIGH>;
  15                 pwms = <&pwm2 0 25000>;
  16                 brightness-levels = <0 4 8 16 32 64 128 255>;
  17                 default-brightness-level = <6>;
  18         };
  19
  20         backlight_dpi: backlight-dpi {
  21                 compatible = "pwm-backlight";
  22                 power-supply = <&reg_lcd>;
  23                 enable-gpios = <&gpio_exp1 7 GPIO_ACTIVE_LOW>;
  24                 pwms = <&pwm0 0 25000>;
  25                 brightness-levels = <0 25 33 50 63 75 88 100>;
  26                 default-brightness-level = <6>;
  27         };
  28
  29         hdmi0-out {
  30                 compatible = "hdmi-connector";
  31                 type = "a";
  32
  33                 port {
  34                         hdmi0_con: endpoint {
  35                                 remote-endpoint = <&rcar_dw_hdmi0_out>;
  36                         };
  37                 };
  38         };
  39
  40         keys {
  41                 compatible = "gpio-keys";
  42
  43                 key-1 { /* S19 */
  44                         gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
  45                         linux,code = <KEY_UP>;
  46                         label = "Up";
  47                         wakeup-source;
  48                         debounce-interval = <20>;
  49                 };
  50                 key-2 { /*S20 */
  51                         gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
  52                         linux,code = <KEY_LEFT>;
  53                         label = "Left";
  54                         wakeup-source;
  55                         debounce-interval = <20>;
  56                 };
  57                 key-3 { /* S21 */
  58                         gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
  59                         linux,code = <KEY_DOWN>;
  60                         label = "Down";
  61                         wakeup-source;
  62                         debounce-interval = <20>;
  63                 };
  64                 key-4 { /* S22 */
  65                         gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
  66                         linux,code = <KEY_RIGHT>;
  67                         label = "Right";
  68                         wakeup-source;
  69                         debounce-interval = <20>;
  70                 };
  71                 key-5 { /* S23 */
  72                         gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
  73                         linux,code = <KEY_ENTER>;
  74                         label = "Center";
  75                         wakeup-source;
  76                         debounce-interval = <20>;
  77                 };
  78         };
  79
  80         leds {
  81                 compatible = "gpio-leds";
  82                 pinctrl-0 = <&led_pins>;
  83                 pinctrl-names = "default";
  84
  85                 led0 {
  86                         gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
  87                         label = "LED0";
  88                         linux,default-trigger = "heartbeat";
  89                 };
  90                 led1 {
  91                         gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
  92                         label = "LED1";
  93                 };
  94                 led2 {
  95                         gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
  96                         label = "LED2";
  97                 };
  98                 led3 {
  99                         gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
 100                         label = "LED3";
 101                 };
 102         };
 103
 104         lvds {
 105                 compatible = "panel-lvds";
 106                 power-supply = <&reg_lcd_reset>;
 107                 width-mm = <223>;
 108                 height-mm = <125>;
 109                 backlight = <&backlight_lvds>;
 110                 data-mapping = "vesa-24";
 111
 112                 panel-timing {
 113                         /* 800x480@60Hz */
 114                         clock-frequency = <30000000>;
 115                         hactive = <800>;
 116                         vactive = <480>;
 117                         hsync-len = <48>;
 118                         hfront-porch = <40>;
 119                         hback-porch = <40>;
 120                         vfront-porch = <13>;
 121                         vback-porch = <29>;
 122                         vsync-len = <1>;
 123                         hsync-active = <1>;
 124                         vsync-active = <3>;
 125                         de-active = <1>;
 126                         pixelclk-active = <0>;
 127                 };
 128
 129                 port {
 130                         panel_in: endpoint {
 131                                 remote-endpoint = <&lvds0_out>;
 132                         };
 133                 };
 134         };
 135
 136         rgb {
 137                 /* Different LCD with compatible timings */
 138                 compatible = "rocktech,rk070er9427";
 139                 backlight = <&backlight_dpi>;
 140                 enable-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 141                 power-supply = <&reg_lcd>;
 142                 port {
 143                         rgb_panel: endpoint {
 144                                 remote-endpoint = <&du_out_rgb>;
 145                         };
 146                 };
 147         };
 148
 149         reg_audio: regulator_audio {
 150                 compatible = "regulator-fixed";
 151                 regulator-name = "audio-1.8V";
 152                 regulator-min-microvolt = <1800000>;
 153                 regulator-max-microvolt = <1800000>;
 154                 gpio = <&gpio_exp4 1 GPIO_ACTIVE_HIGH>;
 155                 enable-active-high;
 156         };
 157
 158         reg_lcd: regulator-lcd {
 159                 compatible = "regulator-fixed";
 160                 regulator-name = "lcd_panel_pwr";
 161                 regulator-min-microvolt = <3300000>;
 162                 regulator-max-microvolt = <3300000>;
 163                 gpio = <&gpio_exp1 1 GPIO_ACTIVE_HIGH>;
 164                 enable-active-high;
 165         };
 166
 167         reg_lcd_reset: regulator-lcd-reset {
 168                 compatible = "regulator-fixed";
 169                 regulator-name = "nLCD_RESET";
 170                 regulator-min-microvolt = <3300000>;
 171                 regulator-max-microvolt = <3300000>;
 172                 gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>;
 173                 enable-active-high;
 174                 vin-supply = <&reg_lcd>;
 175         };
 176
 177         reg_cam0: regulator_camera {
 178                 compatible = "regulator-fixed";
 179                 regulator-name = "reg_cam0";
 180                 regulator-min-microvolt = <1800000>;
 181                 regulator-max-microvolt = <1800000>;
 182                 gpio = <&gpio_exp2 2 GPIO_ACTIVE_HIGH>;
 183                 enable-active-high;
 184         };
 185
 186         reg_cam1: regulator_camera {
 187                 compatible = "regulator-fixed";
 188                 regulator-name = "reg_cam1";
 189                 regulator-min-microvolt = <1800000>;
 190                 regulator-max-microvolt = <1800000>;
 191                 gpio = <&gpio_exp2 5 GPIO_ACTIVE_HIGH>;
 192                 enable-active-high;
 193                 startup-delay-us = <100000>;
 194         };
 195
 196         sound_card {
 197                 compatible = "audio-graph-card";
 198                 label = "rcar-sound";
 199                 dais = <&rsnd_port0>, <&rsnd_port1>;
 200         };
 201
 202         vccq_sdhi0: regulator-vccq-sdhi0 {
 203                 compatible = "regulator-gpio";
 204                 regulator-name = "SDHI0 VccQ";
 205                 regulator-min-microvolt = <1800000>;
 206                 regulator-max-microvolt = <3300000>;
 207                 gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
 208                 gpios-states = <1>;
 209                 states = <3300000 1>, <1800000 0>;
 210         };
 211
 212         /* External DU dot clocks */
 213         x302_clk: x302-clock {
 214                 compatible = "fixed-clock";
 215                 #clock-cells = <0>;
 216                 clock-frequency = <33000000>;
 217         };
 218
 219         x304_clk: x304-clock {
 220                 compatible = "fixed-clock";
 221                 #clock-cells = <0>;
 222                 clock-frequency = <25000000>;
 223         };
 224
 225         connector {
 226                 compatible = "usb-c-connector";
 227                 label = "USB-C";
 228                 data-role = "dual";
 229
 230                 ports {
 231                         #address-cells = <1>;
 232                         #size-cells = <0>;
 233                         port@0 {
 234                                 reg = <0>;
 235                                 hs_ep: endpoint {
 236                                         remote-endpoint = <&usb3_hs_ep>;
 237                                 };
 238                         };
 239                         port@1 {
 240                                 reg = <1>;
 241                                 ss_ep: endpoint {
 242                                         remote-endpoint = <&hd3ss3220_in_ep>;
 243                                 };
 244                         };
 245                 };
 246         };
 247 };
 248
 249 &audio_clk_b {
 250         clock-frequency = <22579200>;
 251 };
 252
 253 &can0 {
 254         pinctrl-0 = <&can0_pins>;
 255         pinctrl-names = "default";
 256         renesas,can-clock-select = <0x0>;
 257         status = "okay";
 258 };
 259
 260 &can1 {
 261         pinctrl-0 = <&can1_pins>;
 262         pinctrl-names = "default";
 263         renesas,can-clock-select = <0x0>;
 264         status = "okay";
 265 };
 266
 267 &du_out_rgb {
 268         remote-endpoint = <&rgb_panel>;
 269 };
 270
 271 &ehci0 {
 272         dr_mode = "otg";
 273         status = "okay";
 274         clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>;
 275 };
 276
 277 &ehci1 {
 278         status = "okay";
 279         clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>;
 280 };
 281
 282 &hdmi0 {
 283         status = "okay";
 284         ports {
 285                 #address-cells = <1>;
 286                 #size-cells = <0>;
 287                 port@0 {
 288                         reg = <0>;
 289                         dw_hdmi0_in: endpoint {
 290                                 remote-endpoint = <&du_out_hdmi0>;
 291                         };
 292                 };
 293                 port@1 {
 294                         reg = <1>;
 295                         rcar_dw_hdmi0_out: endpoint {
 296                                 remote-endpoint = <&hdmi0_con>;
 297                         };
 298                 };
 299                 port@2 {
 300                         reg = <2>;
 301                         dw_hdmi0_snd_in: endpoint {
 302                                 remote-endpoint = <&rsnd_endpoint1>;
 303                         };
 304                 };
 305         };
 306 };
 307
 308 &hscif1 {
 309         pinctrl-0 = <&hscif1_pins>;
 310         pinctrl-names = "default";
 311         uart-has-rtscts;
 312         status = "okay";
 313 };
 314
 315 &hsusb {
 316         dr_mode = "otg";
 317         status = "okay";
 318 };
 319
 320 &i2c2 {
 321         status = "okay";
 322         clock-frequency = <400000>;
 323         pinctrl-0 = <&i2c2_pins>;
 324         pinctrl-names = "default";
 325
 326         gpio_exp2: gpio@21 {
 327                 compatible = "onnn,pca9654";
 328                 reg = <0x21>;
 329                 gpio-controller;
 330                 #gpio-cells = <2>;
 331         };
 332
 333         gpio_exp3: gpio@22 {
 334                 compatible = "onnn,pca9654";
 335                 reg = <0x22>;
 336                 gpio-controller;
 337                 #gpio-cells = <2>;
 338         };
 339
 340         gpio_exp4: gpio@23 {
 341                 compatible = "onnn,pca9654";
 342                 reg = <0x23>;
 343                 gpio-controller;
 344                 #gpio-cells = <2>;
 345         };
 346
 347         versaclock6_bb: clock-controller@6a {
 348                 compatible = "idt,5p49v6965";
 349                 reg = <0x6a>;
 350                 #clock-cells = <1>;
 351                 clocks = <&x304_clk>;
 352                 clock-names = "xin";
 353
 354                 assigned-clocks = <&versaclock6_bb 1>,
 355                                    <&versaclock6_bb 2>,
 356                                    <&versaclock6_bb 3>,
 357                                    <&versaclock6_bb 4>;
 358                 assigned-clock-rates =  <24000000>, <24000000>, <24000000>, <24576000>;
 359
 360                 OUT1 {
 361                         idt,mode = <VC5_CMOS>;
 362                         idt,voltage-microvolt = <1800000>;
 363                         idt,slew-percent = <100>;
 364                 };
 365
 366                 OUT2 {
 367                         idt,mode = <VC5_CMOS>;
 368                         idt,voltage-microvolt = <1800000>;
 369                         idt,slew-percent = <100>;
 370                 };
 371
 372                 OUT3 {
 373                         idt,mode = <VC5_CMOS>;
 374                         idt,voltage-microvolt = <3300000>;
 375                         idt,slew-percent = <100>;
 376                 };
 377
 378                 OUT4 {
 379                         idt,mode = <VC5_CMOS>;
 380                         idt,voltage-microvolt = <3300000>;
 381                         idt,slew-percent = <100>;
 382                 };
 383         };
 384 };
 385
 386 &i2c0 {
 387         status = "okay";
 388         clock-frequency = <400000>;
 389
 390         pinctrl-0 = <&i2c0_pins>;
 391         pinctrl-names = "default";
 392 };
 393
 394 &i2c5 {
 395         status = "okay";
 396         clock-frequency = <400000>;
 397         pinctrl-0 = <&i2c5_pins>;
 398         pinctrl-names = "default";
 399
 400         codec: wm8962@1a {
 401                 compatible = "wlf,wm8962";
 402                 reg = <0x1a>;
 403                 clocks = <&versaclock6_bb 3>;
 404                 DCVDD-supply = <&reg_audio>;
 405                 DBVDD-supply = <&reg_audio>;
 406                 AVDD-supply = <&reg_audio>;
 407                 CPVDD-supply = <&reg_audio>;
 408                 MICVDD-supply = <&reg_audio>;
 409                 PLLVDD-supply = <&reg_audio>;
 410                 SPKVDD1-supply = <&reg_audio>;
 411                 SPKVDD2-supply = <&reg_audio>;
 412                 gpio-cfg = <
 413                         0x0000 /* 0:Default */
 414                         0x0000 /* 1:Default */
 415                         0x0000 /* 2:Default */
 416                         0x0000 /* 3:Default */
 417                         0x0000 /* 4:Default */
 418                         0x0000 /* 5:Default */
 419                 >;
 420                 port {
 421                         wm8962_endpoint: endpoint {
 422                                 remote-endpoint = <&rsnd_endpoint0>;
 423                         };
 424                 };
 425         };
 426
 427         /* 0 - lcd_reset */
 428         /* 1 - lcd_pwr */
 429         /* 2 - lcd_select */
 430         /* 3 - backlight-enable */
 431         /* 4 - Touch_shdwn */
 432         /* 5 - LCD_H_pol */
 433         /* 6 - lcd_V_pol */
 434         gpio_exp1: gpio@20 {
 435                 compatible = "onnn,pca9654";
 436                 reg = <0x20>;
 437                 gpio-controller;
 438                 #gpio-cells = <2>;
 439         };
 440
 441         touchscreen@26 {
 442                 compatible = "ilitek,ili2117";
 443                 reg = <0x26>;
 444                 interrupt-parent = <&gpio5>;
 445                 interrupts = <9 IRQ_TYPE_EDGE_RISING>;
 446                 wakeup-source;
 447         };
 448
 449         hd3ss3220@47 {
 450                 compatible = "ti,hd3ss3220";
 451                 reg = <0x47>;
 452                 interrupt-parent = <&gpio6>;
 453                 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 454
 455                 ports {
 456                         #address-cells = <1>;
 457                         #size-cells = <0>;
 458                         port@0 {
 459                                 reg = <0>;
 460                                 hd3ss3220_in_ep: endpoint {
 461                                         remote-endpoint = <&ss_ep>;
 462                                 };
 463                         };
 464                         port@1 {
 465                                 reg = <1>;
 466                                 hd3ss3220_out_ep: endpoint {
 467                                         remote-endpoint = <&usb3_role_switch>;
 468                                 };
 469                         };
 470                 };
 471         };
 472 };
 473
 474 &lvds0 {
 475         status = "okay";
 476
 477         ports {
 478                 port@1 {
 479                         lvds0_out: endpoint {
 480                                 remote-endpoint = <&panel_in>;
 481                         };
 482                 };
 483         };
 484 };
 485
 486 &msiof1 {
 487         pinctrl-0 = <&msiof1_pins>;
 488         pinctrl-names = "default";
 489         status = "okay";
 490         cs-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
 491 };
 492
 493 &ohci0 {
 494         dr_mode = "otg";
 495         status = "okay";
 496 };
 497
 498 &ohci1 {
 499         status = "okay";
 500 };
 501
 502 &pciec0 {
 503         status = "okay";
 504 };
 505
 506 &pciec1 {
 507         status = "okay";
 508 };
 509
 510 &pcie_bus_clk {
 511         clock-frequency = <100000000>;
 512 };
 513
 514 &pfc {
 515         can0_pins: can0 {
 516                 groups = "can0_data_a";
 517                 function = "can0";
 518         };
 519
 520         can1_pins: can1 {
 521                 groups = "can1_data";
 522                 function = "can1";
 523         };
 524
 525         du_pins: du {
 526                 groups = "du_rgb888", "du_sync", "du_clk_out_1", "du_disp";
 527                 function = "du";
 528         };
 529
 530         i2c2_pins: i2c2 {
 531                 groups = "i2c2_a";
 532                 function = "i2c2";
 533         };
 534
 535         i2c5_pins: i2c5 {
 536                 groups = "i2c5";
 537                 function = "i2c5";
 538         };
 539
 540         led_pins: leds {
 541                 /* GP_0_4 , AVS1, AVS2, GP_7_3 */
 542                 pins = "GP_0_4", "GP_7_0", "GP_7_1", "GP_7_3";
 543                 bias-pull-down;
 544         };
 545
 546         msiof1_pins: msiof1 {
 547                 groups = "msiof1_clk_g", "msiof1_rxd_g", "msiof1_txd_g";
 548                 function = "msiof1";
 549         };
 550
 551         pwm0_pins: pwm0 {
 552                 groups = "pwm0";
 553                 function = "pwm0";
 554         };
 555
 556         pwm2_pins: pwm2 {
 557                 groups = "pwm2_a";
 558                 function = "pwm2";
 559         };
 560
 561         sdhi0_pins: sd0 {
 562                 groups = "sdhi0_data4", "sdhi0_ctrl";
 563                 function = "sdhi0";
 564                 power-source = <3300>;
 565         };
 566
 567         sdhi0_pins_uhs: sd0_uhs {
 568                 groups = "sdhi0_data4", "sdhi0_ctrl";
 569                 function = "sdhi0";
 570                 power-source = <1800>;
 571         };
 572
 573         sound_pins: sound {
 574                 groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
 575                 function = "ssi";
 576         };
 577
 578         sound_clk_pins: sound_clk {
 579                 groups = "audio_clk_a_a", "audio_clk_b_a";
 580                 function = "audio_clk";
 581         };
 582
 583         usb0_pins: usb0 {
 584                 mux {
 585                         groups = "usb0";
 586                         function = "usb0";
 587                 };
 588         };
 589
 590         usb1_pins: usb1 {
 591                 mux {
 592                         groups = "usb1";
 593                         function = "usb1";
 594                 };
 595         };
 596
 597         usb30_pins: usb30 {
 598                 mux {
 599                         groups = "usb30";
 600                         function = "usb30";
 601                 };
 602         };
 603 };
 604
 605 &pwm0 {
 606         pinctrl-0 = <&pwm0_pins>;
 607         pinctrl-names = "default";
 608         status = "okay";
 609 };
 610
 611 &pwm2 {
 612         pinctrl-0 = <&pwm2_pins>;
 613         pinctrl-names = "default";
 614         status = "okay";
 615 };
 616
 617 &rcar_sound {
 618         pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
 619         pinctrl-names = "default";
 620
 621         /* Single DAI */
 622         #sound-dai-cells = <0>;
 623
 624         /* audio_clkout0/1/2/3 */
 625         #clock-cells = <1>;
 626         clock-frequency = <11289600>;
 627
 628         status = "okay";
 629
 630         ports {
 631                 #address-cells = <1>;
 632                 #size-cells = <0>;
 633                 rsnd_port0: port@0 {
 634                         reg = <0>;
 635                         rsnd_endpoint0: endpoint {
 636                                 remote-endpoint = <&wm8962_endpoint>;
 637
 638                                 dai-format = "i2s";
 639                                 bitclock-master = <&rsnd_endpoint0>;
 640                                 frame-master = <&rsnd_endpoint0>;
 641
 642                                 playback = <&ssi1>, <&dvc1>, <&src1>;
 643                                 capture = <&ssi0>;
 644                         };
 645                 };
 646                 rsnd_port1: port@1 {
 647                     reg = <0x01>;
 648                         rsnd_endpoint1: endpoint {
 649                                 remote-endpoint = <&dw_hdmi0_snd_in>;
 650
 651                                 dai-format = "i2s";
 652                                 bitclock-master = <&rsnd_endpoint1>;
 653                                 frame-master = <&rsnd_endpoint1>;
 654
 655                                 playback = <&ssi2>;
 656                         };
 657                 };
 658         };
 659 };
 660
 661 &rwdt {
 662         status = "okay";
 663         timeout-sec = <60>;
 664 };
 665
 666 &scif0 {
 667         pinctrl-0 = <&scif0_pins>;
 668         pinctrl-names = "default";
 669         status = "okay";
 670 };
 671
 672 &scif5 {
 673         pinctrl-0 = <&scif5_pins>;
 674         pinctrl-names = "default";
 675         status = "okay";
 676 };
 677
 678 &scif_clk {
 679         clock-frequency = <14745600>;
 680 };
 681
 682 &sdhi0 {
 683         pinctrl-0 = <&sdhi0_pins>;
 684         pinctrl-1 = <&sdhi0_pins_uhs>;
 685         pinctrl-names = "default", "state_uhs";
 686         vmmc-supply = <&reg_3p3v>;
 687         vqmmc-supply = <&vccq_sdhi0>;
 688         cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
 689         bus-width = <4>;
 690         sd-uhs-sdr50;
 691         sd-uhs-sdr104;
 692         status = "okay";
 693 };
 694
 695 &ssi1 {
 696         shared-pin;
 697 };
 698
 699 &tmu0 {
 700         status = "okay";
 701 };
 702
 703 &tmu1 {
 704         status = "okay";
 705 };
 706
 707 &tmu2 {
 708         status = "okay";
 709 };
 710
 711 &tmu3 {
 712         status = "okay";
 713 };
 714
 715 &tmu4 {
 716         status = "okay";
 717 };
 718
 719 &usb2_phy0 {
 720         pinctrl-0 = <&usb0_pins>;
 721         pinctrl-names = "default";
 722         status = "okay";
 723 };
 724
 725 &usb2_phy1 {
 726         pinctrl-0 = <&usb1_pins>;
 727         pinctrl-names = "default";
 728         status = "okay";
 729 };
 730
 731 &usb3_peri0 {
 732         companion = <&xhci0>;
 733         status = "okay";
 734         usb-role-switch;
 735
 736         ports {
 737                 #address-cells = <1>;
 738                 #size-cells = <0>;
 739                 port@0 {
 740                         reg = <0>;
 741                         usb3_hs_ep: endpoint {
 742                                 remote-endpoint = <&hs_ep>;
 743                         };
 744                 };
 745                 port@1 {
 746                         reg = <1>;
 747                         usb3_role_switch: endpoint {
 748                                 remote-endpoint = <&hd3ss3220_out_ep>;
 749                         };
 750                 };
 751         };
 752 };
 753
 754 &usb3_phy0 {
 755         status = "okay";
 756 };
 757
 758 &vin0 {
 759         status = "okay";
 760 };
 761 &vin1 {
 762         status = "okay";
 763 };
 764 &vin2 {
 765         status = "okay";
 766 };
 767 &vin3 {
 768         status = "okay";
 769 };
 770 &vin4 {
 771         status = "okay";
 772 };
 773 &vin5 {
 774         status = "okay";
 775 };
 776 &vin6 {
 777         status = "okay";
 778 };
 779 &vin7 {
 780         status = "okay";
 781 };
 782
 783 &xhci0
 784 {
 785         pinctrl-0 = <&usb30_pins>;
 786         pinctrl-names = "default";
 787         status = "okay";
 788 };