arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright 2020, Compass Electronics Group, LLC
   4  */
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8 #include <dt-bindings/clk/versaclock.h>
   9
  10 / {
  11         backlight_lvds: backlight-lvds {
  12                 compatible = "pwm-backlight";
  13                 power-supply = <&reg_lcd>;
  14                 enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_HIGH>;
  15                 pwms = <&pwm2 0 25000>;
  16                 brightness-levels = <0 4 8 16 32 64 128 255>;
  17                 default-brightness-level = <6>;
  18         };
  19
  20         backlight_dpi: backlight-dpi {
  21                 compatible = "pwm-backlight";
  22                 power-supply = <&reg_lcd>;
  23                 enable-gpios = <&gpio_exp1 7 GPIO_ACTIVE_LOW>;
  24                 pwms = <&pwm0 0 25000>;
  25                 brightness-levels = <0 25 33 50 63 75 88 100>;
  26                 default-brightness-level = <6>;
  27         };
  28
  29         hdmi0-out {
  30                 compatible = "hdmi-connector";
  31                 type = "a";
  32
  33                 port {
  34                         hdmi0_con: endpoint {
  35                                 remote-endpoint = <&rcar_dw_hdmi0_out>;
  36                         };
  37                 };
  38         };
  39
  40         keys {
  41                 compatible = "gpio-keys";
  42
  43                 key-1 { /* S19 */
  44                         gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
  45                         linux,code = <KEY_UP>;
  46                         label = "Up";
  47                         wakeup-source;
  48                         debounce-interval = <20>;
  49                 };
  50                 key-2 { /*S20 */
  51                         gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
  52                         linux,code = <KEY_LEFT>;
  53                         label = "Left";
  54                         wakeup-source;
  55                         debounce-interval = <20>;
  56                 };
  57                 key-3 { /* S21 */
  58                         gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
  59                         linux,code = <KEY_DOWN>;
  60                         label = "Down";
  61                         wakeup-source;
  62                         debounce-interval = <20>;
  63                 };
  64                 key-4 { /* S22 */
  65                         gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
  66                         linux,code = <KEY_RIGHT>;
  67                         label = "Right";
  68                         wakeup-source;
  69                         debounce-interval = <20>;
  70                 };
  71                 key-5 { /* S23 */
  72                         gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
  73                         linux,code = <KEY_ENTER>;
  74                         label = "Center";
  75                         wakeup-source;
  76                         debounce-interval = <20>;
  77                 };
  78         };
  79
  80         leds {
  81                 compatible = "gpio-leds";
  82                 pinctrl-0 = <&led_pins>;
  83                 pinctrl-names = "default";
  84
  85                 led0 {
  86                         gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
  87                         label = "LED0";
  88                         linux,default-trigger = "heartbeat";
  89                 };
  90                 led1 {
  91                         gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
  92                         label = "LED1";
  93                 };
  94                 led2 {
  95                         gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
  96                         label = "LED2";
  97                 };
  98                 led3 {
  99                         gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
 100                         label = "LED3";
 101                 };
 102         };
 103
 104         lvds {
 105                 compatible = "panel-lvds";
 106                 power-supply = <&reg_lcd_reset>;
 107                 width-mm = <223>;
 108                 height-mm = <125>;
 109                 backlight = <&backlight_lvds>;
 110                 data-mapping = "vesa-24";
 111
 112                 panel-timing {
 113                         /* 800x480@60Hz */
 114                         clock-frequency = <30000000>;
 115                         hactive = <800>;
 116                         vactive = <480>;
 117                         hsync-len = <48>;
 118                         hfront-porch = <40>;
 119                         hback-porch = <40>;
 120                         vfront-porch = <13>;
 121                         vback-porch = <29>;
 122                         vsync-len = <1>;
 123                         hsync-active = <1>;
 124                         vsync-active = <3>;
 125                         de-active = <1>;
 126                         pixelclk-active = <0>;
 127                 };
 128
 129                 port {
 130                         panel_in: endpoint {
 131                                 remote-endpoint = <&lvds0_out>;
 132                         };
 133                 };
 134         };
 135
 136         rgb {
 137                 /* Different LCD with compatible timings */
 138                 compatible = "rocktech,rk070er9427";
 139                 backlight = <&backlight_dpi>;
 140                 enable-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 141                 power-supply = <&reg_lcd>;
 142                 port {
 143                         rgb_panel: endpoint {
 144                                 remote-endpoint = <&du_out_rgb>;
 145                         };
 146                 };
 147         };
 148
 149         reg_audio: regulator_audio {
 150                 compatible = "regulator-fixed";
 151                 regulator-name = "audio-1.8V";
 152                 regulator-min-microvolt = <1800000>;
 153                 regulator-max-microvolt = <1800000>;
 154                 gpio = <&gpio_exp4 1 GPIO_ACTIVE_HIGH>;
 155                 enable-active-high;
 156         };
 157
 158         reg_lcd: regulator-lcd {
 159                 compatible = "regulator-fixed";
 160                 regulator-name = "lcd_panel_pwr";
 161                 regulator-min-microvolt = <3300000>;
 162                 regulator-max-microvolt = <3300000>;
 163                 gpio = <&gpio_exp1 1 GPIO_ACTIVE_HIGH>;
 164                 enable-active-high;
 165         };
 166
 167         reg_lcd_reset: regulator-lcd-reset {
 168                 compatible = "regulator-fixed";
 169                 regulator-name = "nLCD_RESET";
 170                 regulator-min-microvolt = <3300000>;
 171                 regulator-max-microvolt = <3300000>;
 172                 gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>;
 173                 enable-active-high;
 174                 vin-supply = <&reg_lcd>;
 175         };
 176
 177         reg_cam0: regulator_camera {
 178                 compatible = "regulator-fixed";
 179                 regulator-name = "reg_cam0";
 180                 regulator-min-microvolt = <1800000>;
 181                 regulator-max-microvolt = <1800000>;
 182                 gpio = <&gpio_exp2 2 GPIO_ACTIVE_HIGH>;
 183                 enable-active-high;
 184         };
 185
 186         reg_cam1: regulator_camera {
 187                 compatible = "regulator-fixed";
 188                 regulator-name = "reg_cam1";
 189                 regulator-min-microvolt = <1800000>;
 190                 regulator-max-microvolt = <1800000>;
 191                 gpio = <&gpio_exp2 5 GPIO_ACTIVE_HIGH>;
 192                 enable-active-high;
 193                 startup-delay-us = <100000>;
 194         };
 195
 196         sound_card {
 197                 compatible = "audio-graph-card";
 198                 label = "rcar-sound";
 199                 dais = <&rsnd_port0>, <&rsnd_port1>;
 200                 widgets = "Microphone", "Mic Jack",
 201                           "Line", "Line In Jack",
 202                           "Headphone", "Headphone Jack";
 203                 mic-det-gpio = <&gpio0 2 GPIO_ACTIVE_LOW>;
 204                 routing = "Headphone Jack", "HPOUTL",
 205                          "Headphone Jack", "HPOUTR",
 206                          "IN3R", "MICBIAS",
 207                          "Mic Jack", "IN3R";
 208         };
 209
 210         vccq_sdhi0: regulator-vccq-sdhi0 {
 211                 compatible = "regulator-gpio";
 212                 regulator-name = "SDHI0 VccQ";
 213                 regulator-min-microvolt = <1800000>;
 214                 regulator-max-microvolt = <3300000>;
 215                 gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
 216                 gpios-states = <1>;
 217                 states = <3300000 1>, <1800000 0>;
 218         };
 219
 220         /* External DU dot clocks */
 221         x302_clk: x302-clock {
 222                 compatible = "fixed-clock";
 223                 #clock-cells = <0>;
 224                 clock-frequency = <33000000>;
 225         };
 226
 227         x304_clk: x304-clock {
 228                 compatible = "fixed-clock";
 229                 #clock-cells = <0>;
 230                 clock-frequency = <25000000>;
 231         };
 232
 233         connector {
 234                 compatible = "usb-c-connector";
 235                 label = "USB-C";
 236                 data-role = "dual";
 237
 238                 ports {
 239                         #address-cells = <1>;
 240                         #size-cells = <0>;
 241                         port@0 {
 242                                 reg = <0>;
 243                                 hs_ep: endpoint {
 244                                         remote-endpoint = <&usb3_hs_ep>;
 245                                 };
 246                         };
 247                         port@1 {
 248                                 reg = <1>;
 249                                 ss_ep: endpoint {
 250                                         remote-endpoint = <&hd3ss3220_in_ep>;
 251                                 };
 252                         };
 253                 };
 254         };
 255 };
 256
 257 &audio_clk_b {
 258         clock-frequency = <22579200>;
 259 };
 260
 261 &can0 {
 262         pinctrl-0 = <&can0_pins>;
 263         pinctrl-names = "default";
 264         renesas,can-clock-select = <0x0>;
 265         status = "okay";
 266 };
 267
 268 &can1 {
 269         pinctrl-0 = <&can1_pins>;
 270         pinctrl-names = "default";
 271         renesas,can-clock-select = <0x0>;
 272         status = "okay";
 273 };
 274
 275 &du_out_rgb {
 276         remote-endpoint = <&rgb_panel>;
 277 };
 278
 279 &ehci0 {
 280         dr_mode = "otg";
 281         status = "okay";
 282         clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>;
 283 };
 284
 285 &ehci1 {
 286         status = "okay";
 287         clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>;
 288 };
 289
 290 &hdmi0 {
 291         status = "okay";
 292         ports {
 293                 #address-cells = <1>;
 294                 #size-cells = <0>;
 295                 port@0 {
 296                         reg = <0>;
 297                         dw_hdmi0_in: endpoint {
 298                                 remote-endpoint = <&du_out_hdmi0>;
 299                         };
 300                 };
 301                 port@1 {
 302                         reg = <1>;
 303                         rcar_dw_hdmi0_out: endpoint {
 304                                 remote-endpoint = <&hdmi0_con>;
 305                         };
 306                 };
 307                 port@2 {
 308                         reg = <2>;
 309                         dw_hdmi0_snd_in: endpoint {
 310                                 remote-endpoint = <&rsnd_endpoint1>;
 311                         };
 312                 };
 313         };
 314 };
 315
 316 &hscif1 {
 317         pinctrl-0 = <&hscif1_pins>;
 318         pinctrl-names = "default";
 319         uart-has-rtscts;
 320         status = "okay";
 321 };
 322
 323 &hsusb {
 324         dr_mode = "otg";
 325         status = "okay";
 326 };
 327
 328 &i2c2 {
 329         status = "okay";
 330         clock-frequency = <400000>;
 331         pinctrl-0 = <&i2c2_pins>;
 332         pinctrl-names = "default";
 333
 334         gpio_exp2: gpio@21 {
 335                 compatible = "onnn,pca9654";
 336                 reg = <0x21>;
 337                 gpio-controller;
 338                 #gpio-cells = <2>;
 339         };
 340
 341         gpio_exp3: gpio@22 {
 342                 compatible = "onnn,pca9654";
 343                 reg = <0x22>;
 344                 gpio-controller;
 345                 #gpio-cells = <2>;
 346         };
 347
 348         gpio_exp4: gpio@23 {
 349                 compatible = "onnn,pca9654";
 350                 reg = <0x23>;
 351                 gpio-controller;
 352                 #gpio-cells = <2>;
 353         };
 354
 355         versaclock6_bb: clock-controller@6a {
 356                 compatible = "idt,5p49v6965";
 357                 reg = <0x6a>;
 358                 #clock-cells = <1>;
 359                 clocks = <&x304_clk>;
 360                 clock-names = "xin";
 361
 362                 assigned-clocks = <&versaclock6_bb 1>,
 363                                    <&versaclock6_bb 2>,
 364                                    <&versaclock6_bb 3>,
 365                                    <&versaclock6_bb 4>;
 366                 assigned-clock-rates =  <24000000>, <24000000>, <24000000>, <24576000>;
 367
 368                 OUT1 {
 369                         idt,mode = <VC5_CMOS>;
 370                         idt,voltage-microvolt = <1800000>;
 371                         idt,slew-percent = <100>;
 372                 };
 373
 374                 OUT2 {
 375                         idt,mode = <VC5_CMOS>;
 376                         idt,voltage-microvolt = <1800000>;
 377                         idt,slew-percent = <100>;
 378                 };
 379
 380                 OUT3 {
 381                         idt,mode = <VC5_CMOS>;
 382                         idt,voltage-microvolt = <3300000>;
 383                         idt,slew-percent = <100>;
 384                 };
 385
 386                 OUT4 {
 387                         idt,mode = <VC5_CMOS>;
 388                         idt,voltage-microvolt = <3300000>;
 389                         idt,slew-percent = <100>;
 390                 };
 391         };
 392 };
 393
 394 &i2c0 {
 395         status = "okay";
 396         clock-frequency = <400000>;
 397
 398         pinctrl-0 = <&i2c0_pins>;
 399         pinctrl-names = "default";
 400 };
 401
 402 &i2c5 {
 403         status = "okay";
 404         clock-frequency = <400000>;
 405         pinctrl-0 = <&i2c5_pins>;
 406         pinctrl-names = "default";
 407
 408         codec: wm8962@1a {
 409                 compatible = "wlf,wm8962";
 410                 reg = <0x1a>;
 411                 clocks = <&versaclock6_bb 3>;
 412                 DCVDD-supply = <&reg_audio>;
 413                 DBVDD-supply = <&reg_audio>;
 414                 AVDD-supply = <&reg_audio>;
 415                 CPVDD-supply = <&reg_audio>;
 416                 MICVDD-supply = <&reg_audio>;
 417                 PLLVDD-supply = <&reg_audio>;
 418                 SPKVDD1-supply = <&reg_audio>;
 419                 SPKVDD2-supply = <&reg_audio>;
 420                 gpio-cfg = <
 421                         0x0000 /* 0:Default */
 422                         0x0000 /* 1:Default */
 423                         0x0000 /* 2:Default */
 424                         0x0000 /* 3:Default */
 425                         0x0000 /* 4:Default */
 426                         0x0000 /* 5:Default */
 427                 >;
 428                 port {
 429                         wm8962_endpoint: endpoint {
 430                                 remote-endpoint = <&rsnd_endpoint0>;
 431                         };
 432                 };
 433         };
 434
 435         /* 0 - lcd_reset */
 436         /* 1 - lcd_pwr */
 437         /* 2 - lcd_select */
 438         /* 3 - backlight-enable */
 439         /* 4 - Touch_shdwn */
 440         /* 5 - LCD_H_pol */
 441         /* 6 - lcd_V_pol */
 442         gpio_exp1: gpio@20 {
 443                 compatible = "onnn,pca9654";
 444                 reg = <0x20>;
 445                 gpio-controller;
 446                 #gpio-cells = <2>;
 447         };
 448
 449         touchscreen@26 {
 450                 compatible = "ilitek,ili2117";
 451                 reg = <0x26>;
 452                 interrupt-parent = <&gpio5>;
 453                 interrupts = <9 IRQ_TYPE_EDGE_RISING>;
 454                 wakeup-source;
 455         };
 456
 457         hd3ss3220@47 {
 458                 compatible = "ti,hd3ss3220";
 459                 reg = <0x47>;
 460                 interrupt-parent = <&gpio6>;
 461                 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 462
 463                 ports {
 464                         #address-cells = <1>;
 465                         #size-cells = <0>;
 466                         port@0 {
 467                                 reg = <0>;
 468                                 hd3ss3220_in_ep: endpoint {
 469                                         remote-endpoint = <&ss_ep>;
 470                                 };
 471                         };
 472                         port@1 {
 473                                 reg = <1>;
 474                                 hd3ss3220_out_ep: endpoint {
 475                                         remote-endpoint = <&usb3_role_switch>;
 476                                 };
 477                         };
 478                 };
 479         };
 480 };
 481
 482 &lvds0 {
 483         status = "okay";
 484
 485         ports {
 486                 port@1 {
 487                         lvds0_out: endpoint {
 488                                 remote-endpoint = <&panel_in>;
 489                         };
 490                 };
 491         };
 492 };
 493
 494 &msiof1 {
 495         pinctrl-0 = <&msiof1_pins>;
 496         pinctrl-names = "default";
 497         status = "okay";
 498         cs-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
 499 };
 500
 501 &ohci0 {
 502         dr_mode = "otg";
 503         status = "okay";
 504 };
 505
 506 &ohci1 {
 507         status = "okay";
 508 };
 509
 510 &pciec0 {
 511         status = "okay";
 512 };
 513
 514 &pciec1 {
 515         status = "okay";
 516 };
 517
 518 &pcie_bus_clk {
 519         clock-frequency = <100000000>;
 520 };
 521
 522 &pfc {
 523         can0_pins: can0 {
 524                 groups = "can0_data_a";
 525                 function = "can0";
 526         };
 527
 528         can1_pins: can1 {
 529                 groups = "can1_data";
 530                 function = "can1";
 531         };
 532
 533         du_pins: du {
 534                 groups = "du_rgb888", "du_sync", "du_clk_out_1", "du_disp";
 535                 function = "du";
 536         };
 537
 538         i2c2_pins: i2c2 {
 539                 groups = "i2c2_a";
 540                 function = "i2c2";
 541         };
 542
 543         i2c5_pins: i2c5 {
 544                 groups = "i2c5";
 545                 function = "i2c5";
 546         };
 547
 548         led_pins: leds {
 549                 /* GP_0_4 , AVS1, AVS2, GP_7_3 */
 550                 pins = "GP_0_4", "GP_7_0", "GP_7_1", "GP_7_3";
 551                 bias-pull-down;
 552         };
 553
 554         msiof1_pins: msiof1 {
 555                 groups = "msiof1_clk_g", "msiof1_rxd_g", "msiof1_txd_g";
 556                 function = "msiof1";
 557         };
 558
 559         pwm0_pins: pwm0 {
 560                 groups = "pwm0";
 561                 function = "pwm0";
 562         };
 563
 564         pwm2_pins: pwm2 {
 565                 groups = "pwm2_a";
 566                 function = "pwm2";
 567         };
 568
 569         sdhi0_pins: sd0 {
 570                 groups = "sdhi0_data4", "sdhi0_ctrl";
 571                 function = "sdhi0";
 572                 power-source = <3300>;
 573         };
 574
 575         sdhi0_pins_uhs: sd0_uhs {
 576                 groups = "sdhi0_data4", "sdhi0_ctrl";
 577                 function = "sdhi0";
 578                 power-source = <1800>;
 579         };
 580
 581         sound_pins: sound {
 582                 groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
 583                 function = "ssi";
 584         };
 585
 586         sound_clk_pins: sound_clk {
 587                 groups = "audio_clk_a_a", "audio_clk_b_a";
 588                 function = "audio_clk";
 589         };
 590
 591         usb0_pins: usb0 {
 592                 mux {
 593                         groups = "usb0";
 594                         function = "usb0";
 595                 };
 596         };
 597
 598         usb1_pins: usb1 {
 599                 mux {
 600                         groups = "usb1";
 601                         function = "usb1";
 602                 };
 603         };
 604
 605         usb30_pins: usb30 {
 606                 mux {
 607                         groups = "usb30";
 608                         function = "usb30";
 609                 };
 610         };
 611 };
 612
 613 &pwm0 {
 614         pinctrl-0 = <&pwm0_pins>;
 615         pinctrl-names = "default";
 616         status = "okay";
 617 };
 618
 619 &pwm2 {
 620         pinctrl-0 = <&pwm2_pins>;
 621         pinctrl-names = "default";
 622         status = "okay";
 623 };
 624
 625 &rcar_sound {
 626         pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
 627         pinctrl-names = "default";
 628
 629         /* Single DAI */
 630         #sound-dai-cells = <0>;
 631
 632         /* audio_clkout0/1/2/3 */
 633         #clock-cells = <1>;
 634         clock-frequency = <11289600>;
 635
 636         status = "okay";
 637
 638         ports {
 639                 #address-cells = <1>;
 640                 #size-cells = <0>;
 641                 rsnd_port0: port@0 {
 642                         reg = <0>;
 643                         rsnd_endpoint0: endpoint {
 644                                 remote-endpoint = <&wm8962_endpoint>;
 645
 646                                 dai-format = "i2s";
 647                                 bitclock-master = <&rsnd_endpoint0>;
 648                                 frame-master = <&rsnd_endpoint0>;
 649
 650                                 playback = <&ssi1>, <&dvc1>, <&src1>;
 651                                 capture = <&ssi0>;
 652                         };
 653                 };
 654                 rsnd_port1: port@1 {
 655                     reg = <0x01>;
 656                         rsnd_endpoint1: endpoint {
 657                                 remote-endpoint = <&dw_hdmi0_snd_in>;
 658
 659                                 dai-format = "i2s";
 660                                 bitclock-master = <&rsnd_endpoint1>;
 661                                 frame-master = <&rsnd_endpoint1>;
 662
 663                                 playback = <&ssi2>;
 664                         };
 665                 };
 666         };
 667 };
 668
 669 &rwdt {
 670         status = "okay";
 671         timeout-sec = <60>;
 672 };
 673
 674 &scif0 {
 675         pinctrl-0 = <&scif0_pins>;
 676         pinctrl-names = "default";
 677         status = "okay";
 678 };
 679
 680 &scif5 {
 681         pinctrl-0 = <&scif5_pins>;
 682         pinctrl-names = "default";
 683         status = "okay";
 684 };
 685
 686 &scif_clk {
 687         clock-frequency = <14745600>;
 688 };
 689
 690 &sdhi0 {
 691         pinctrl-0 = <&sdhi0_pins>;
 692         pinctrl-1 = <&sdhi0_pins_uhs>;
 693         pinctrl-names = "default", "state_uhs";
 694         vmmc-supply = <&reg_3p3v>;
 695         vqmmc-supply = <&vccq_sdhi0>;
 696         cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
 697         bus-width = <4>;
 698         sd-uhs-sdr50;
 699         sd-uhs-sdr104;
 700         status = "okay";
 701 };
 702
 703 &ssi1 {
 704         shared-pin;
 705 };
 706
 707 &tmu0 {
 708         status = "okay";
 709 };
 710
 711 &tmu1 {
 712         status = "okay";
 713 };
 714
 715 &tmu2 {
 716         status = "okay";
 717 };
 718
 719 &tmu3 {
 720         status = "okay";
 721 };
 722
 723 &tmu4 {
 724         status = "okay";
 725 };
 726
 727 &usb2_phy0 {
 728         pinctrl-0 = <&usb0_pins>;
 729         pinctrl-names = "default";
 730         status = "okay";
 731 };
 732
 733 &usb2_phy1 {
 734         pinctrl-0 = <&usb1_pins>;
 735         pinctrl-names = "default";
 736         status = "okay";
 737 };
 738
 739 &usb3_peri0 {
 740         companion = <&xhci0>;
 741         status = "okay";
 742         usb-role-switch;
 743
 744         ports {
 745                 #address-cells = <1>;
 746                 #size-cells = <0>;
 747                 port@0 {
 748                         reg = <0>;
 749                         usb3_hs_ep: endpoint {
 750                                 remote-endpoint = <&hs_ep>;
 751                         };
 752                 };
 753                 port@1 {
 754                         reg = <1>;
 755                         usb3_role_switch: endpoint {
 756                                 remote-endpoint = <&hd3ss3220_out_ep>;
 757                         };
 758                 };
 759         };
 760 };
 761
 762 &usb3_phy0 {
 763         status = "okay";
 764 };
 765
 766 &vin0 {
 767         status = "okay";
 768 };
 769 &vin1 {
 770         status = "okay";
 771 };
 772 &vin2 {
 773         status = "okay";
 774 };
 775 &vin3 {
 776         status = "okay";
 777 };
 778 &vin4 {
 779         status = "okay";
 780 };
 781 &vin5 {
 782         status = "okay";
 783 };
 784 &vin6 {
 785         status = "okay";
 786 };
 787 &vin7 {
 788         status = "okay";
 789 };
 790
 791 &xhci0
 792 {
 793         pinctrl-0 = <&usb30_pins>;
 794         pinctrl-names = "default";
 795         status = "okay";
 796 };