arch/arm64/boot/dts/qcom/sm8250-mtp.dts

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2020, The Linux Foundation. All rights reserved.
   4  */
   5
   6 /dts-v1/;
   7
   8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
   9 #include "sm8250.dtsi"
  10 #include "pm8150.dtsi"
  11 #include "pm8150b.dtsi"
  12 #include "pm8150l.dtsi"
  13 #include "pm8009.dtsi"
  14
  15 / {
  16         model = "Qualcomm Technologies, Inc. SM8250 MTP";
  17         compatible = "qcom,sm8250-mtp", "qcom,sm8250";
  18
  19         aliases {
  20                 serial0 = &uart12;
  21         };
  22
  23         chosen {
  24                 stdout-path = "serial0:115200n8";
  25         };
  26
  27         thermal-zones {
  28                 camera-thermal {
  29                         polling-delay-passive = <0>;
  30                         polling-delay = <0>;
  31                         thermal-sensors = <&pm8150l_adc_tm 0>;
  32
  33                         trips {
  34                                 active-config0 {
  35                                         temperature = <125000>;
  36                                         hysteresis = <1000>;
  37                                         type = "passive";
  38                                 };
  39                         };
  40                 };
  41
  42                 conn-thermal {
  43                         polling-delay-passive = <0>;
  44                         polling-delay = <0>;
  45                         thermal-sensors = <&pm8150b_adc_tm 0>;
  46
  47                         trips {
  48                                 active-config0 {
  49                                         temperature = <125000>;
  50                                         hysteresis = <1000>;
  51                                         type = "passive";
  52                                 };
  53                         };
  54                 };
  55
  56                 mmw-pa1-thermal {
  57                         polling-delay-passive = <0>;
  58                         polling-delay = <0>;
  59                         thermal-sensors = <&pm8150_adc_tm 2>;
  60
  61                         trips {
  62                                 active-config0 {
  63                                         temperature = <125000>;
  64                                         hysteresis = <1000>;
  65                                         type = "passive";
  66                                 };
  67                         };
  68                 };
  69
  70                 mmw-pa2-thermal {
  71                         polling-delay-passive = <0>;
  72                         polling-delay = <0>;
  73                         thermal-sensors = <&pm8150l_adc_tm 2>;
  74
  75                         trips {
  76                                 active-config0 {
  77                                         temperature = <125000>;
  78                                         hysteresis = <1000>;
  79                                         type = "passive";
  80                                 };
  81                         };
  82                 };
  83
  84                 skin-msm-thermal {
  85                         polling-delay-passive = <0>;
  86                         polling-delay = <0>;
  87                         thermal-sensors = <&pm8150l_adc_tm 1>;
  88
  89                         trips {
  90                                 active-config0 {
  91                                         temperature = <125000>;
  92                                         hysteresis = <1000>;
  93                                         type = "passive";
  94                                 };
  95                         };
  96                 };
  97
  98                 skin-thermal {
  99                         polling-delay-passive = <0>;
 100                         polling-delay = <0>;
 101                         thermal-sensors = <&pm8150_adc_tm 1>;
 102
 103                         trips {
 104                                 active-config0 {
 105                                         temperature = <125000>;
 106                                         hysteresis = <1000>;
 107                                         type = "passive";
 108                                 };
 109                         };
 110                 };
 111
 112                 xo-thermal {
 113                         polling-delay-passive = <0>;
 114                         polling-delay = <0>;
 115                         thermal-sensors = <&pm8150_adc_tm 0>;
 116
 117                         trips {
 118                                 active-config0 {
 119                                         temperature = <125000>;
 120                                         hysteresis = <1000>;
 121                                         type = "passive";
 122                                 };
 123                         };
 124                 };
 125         };
 126
 127         vph_pwr: vph-pwr-regulator {
 128                 compatible = "regulator-fixed";
 129                 regulator-name = "vph_pwr";
 130                 regulator-min-microvolt = <3700000>;
 131                 regulator-max-microvolt = <3700000>;
 132         };
 133
 134         vreg_s4a_1p8: pm8150-s4 {
 135                 compatible = "regulator-fixed";
 136                 regulator-name = "vreg_s4a_1p8";
 137
 138                 regulator-min-microvolt = <1800000>;
 139                 regulator-max-microvolt = <1800000>;
 140
 141                 regulator-always-on;
 142                 regulator-boot-on;
 143
 144                 vin-supply = <&vph_pwr>;
 145         };
 146
 147         vreg_s6c_0p88: smpc6-regulator {
 148                 compatible = "regulator-fixed";
 149                 regulator-name = "vreg_s6c_0p88";
 150
 151                 regulator-min-microvolt = <880000>;
 152                 regulator-max-microvolt = <880000>;
 153                 regulator-always-on;
 154                 vin-supply = <&vph_pwr>;
 155         };
 156 };
 157
 158 &adsp {
 159         status = "okay";
 160         firmware-name = "qcom/sm8250/adsp.mbn";
 161 };
 162
 163 &apps_rsc {
 164         pm8150-rpmh-regulators {
 165                 compatible = "qcom,pm8150-rpmh-regulators";
 166                 qcom,pmic-id = "a";
 167
 168                 vdd-s1-supply = <&vph_pwr>;
 169                 vdd-s2-supply = <&vph_pwr>;
 170                 vdd-s3-supply = <&vph_pwr>;
 171                 vdd-s4-supply = <&vph_pwr>;
 172                 vdd-s5-supply = <&vph_pwr>;
 173                 vdd-s6-supply = <&vph_pwr>;
 174                 vdd-s7-supply = <&vph_pwr>;
 175                 vdd-s8-supply = <&vph_pwr>;
 176                 vdd-s9-supply = <&vph_pwr>;
 177                 vdd-s10-supply = <&vph_pwr>;
 178                 vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
 179                 vdd-l2-l10-supply = <&vreg_bob>;
 180                 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
 181                 vdd-l6-l9-supply = <&vreg_s8c_1p3>;
 182                 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
 183                 vdd-l13-l16-l17-supply = <&vreg_bob>;
 184
 185                 vreg_s5a_1p9: smps5 {
 186                         regulator-name = "vreg_s5a_1p9";
 187                         regulator-min-microvolt = <1904000>;
 188                         regulator-max-microvolt = <2000000>;
 189                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 190                 };
 191
 192                 vreg_s6a_0p95: smps6 {
 193                         regulator-name = "vreg_s6a_0p95";
 194                         regulator-min-microvolt = <920000>;
 195                         regulator-max-microvolt = <1128000>;
 196                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 197                 };
 198
 199                 vreg_l2a_3p1: ldo2 {
 200                         regulator-name = "vreg_l2a_3p1";
 201                         regulator-min-microvolt = <3072000>;
 202                         regulator-max-microvolt = <3072000>;
 203                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 204                 };
 205
 206                 vreg_l3a_0p9: ldo3 {
 207                         regulator-name = "vreg_l3a_0p9";
 208                         regulator-min-microvolt = <928000>;
 209                         regulator-max-microvolt = <932000>;
 210                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 211                 };
 212
 213                 vreg_l5a_0p875: ldo5 {
 214                         regulator-name = "vreg_l5a_0p875";
 215                         regulator-min-microvolt = <880000>;
 216                         regulator-max-microvolt = <880000>;
 217                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 218                 };
 219
 220                 vreg_l6a_1p2: ldo6 {
 221                         regulator-name = "vreg_l6a_1p2";
 222                         regulator-min-microvolt = <1200000>;
 223                         regulator-max-microvolt = <1200000>;
 224                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 225                 };
 226
 227                 vreg_l7a_1p7: ldo7 {
 228                         regulator-name = "vreg_l7a_1p7";
 229                         regulator-min-microvolt = <1704000>;
 230                         regulator-max-microvolt = <1800000>;
 231                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 232                 };
 233
 234                 vreg_l9a_1p2: ldo9 {
 235                         regulator-name = "vreg_l9a_1p2";
 236                         regulator-min-microvolt = <1200000>;
 237                         regulator-max-microvolt = <1200000>;
 238                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 239                 };
 240
 241                 vreg_l10a_1p8: ldo10 {
 242                         regulator-name = "vreg_l10a_1p8";
 243                         regulator-min-microvolt = <1800000>;
 244                         regulator-max-microvolt = <1800000>;
 245                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 246                 };
 247
 248                 vreg_l12a_1p8: ldo12 {
 249                         regulator-name = "vreg_l12a_1p8";
 250                         regulator-min-microvolt = <1800000>;
 251                         regulator-max-microvolt = <1800000>;
 252                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 253                 };
 254
 255                 vreg_l13a_ts_3p0: ldo13 {
 256                         regulator-name = "vreg_l13a_ts_3p0";
 257                         regulator-min-microvolt = <3008000>;
 258                         regulator-max-microvolt = <3008000>;
 259                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 260                 };
 261
 262                 vreg_l14a_1p8: ldo14 {
 263                         regulator-name = "vreg_l14a_1p8";
 264                         regulator-min-microvolt = <1800000>;
 265                         regulator-max-microvolt = <1880000>;
 266                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 267                 };
 268
 269                 vreg_l15a_11ad_io_1p8: ldo15 {
 270                         regulator-name = "vreg_l15a_11ad_io_1p8";
 271                         regulator-min-microvolt = <1800000>;
 272                         regulator-max-microvolt = <1800000>;
 273                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 274                 };
 275
 276                 vreg_l16a_2p7: ldo16 {
 277                         regulator-name = "vreg_l16a_2p7";
 278                         regulator-min-microvolt = <2704000>;
 279                         regulator-max-microvolt = <2960000>;
 280                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 281                 };
 282
 283                 vreg_l17a_3p0: ldo17 {
 284                         regulator-name = "vreg_l17a_3p0";
 285                         regulator-min-microvolt = <2856000>;
 286                         regulator-max-microvolt = <3008000>;
 287                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 288                 };
 289
 290                 vreg_l18a_0p9: ldo18 {
 291                         regulator-name = "vreg_l18a_0p9";
 292                         regulator-min-microvolt = <912000>;
 293                         regulator-max-microvolt = <912000>;
 294                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 295                 };
 296         };
 297
 298         pm8150l-rpmh-regulators {
 299                 compatible = "qcom,pm8150l-rpmh-regulators";
 300                 qcom,pmic-id = "c";
 301
 302                 vdd-s1-supply = <&vph_pwr>;
 303                 vdd-s2-supply = <&vph_pwr>;
 304                 vdd-s3-supply = <&vph_pwr>;
 305                 vdd-s4-supply = <&vph_pwr>;
 306                 vdd-s5-supply = <&vph_pwr>;
 307                 vdd-s6-supply = <&vph_pwr>;
 308                 vdd-s7-supply = <&vph_pwr>;
 309                 vdd-s8-supply = <&vph_pwr>;
 310                 vdd-l1-l8-supply = <&vreg_s4a_1p8>;
 311                 vdd-l2-l3-supply = <&vreg_s8c_1p3>;
 312                 vdd-l4-l5-l6-supply = <&vreg_bob>;
 313                 vdd-l7-l11-supply = <&vreg_bob>;
 314                 vdd-l9-l10-supply = <&vreg_bob>;
 315                 vdd-bob-supply = <&vph_pwr>;
 316
 317                 vreg_bob: bob {
 318                         regulator-name = "vreg_bob";
 319                         regulator-min-microvolt = <3008000>;
 320                         regulator-max-microvolt = <4000000>;
 321                         regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 322                 };
 323
 324                 vreg_s8c_1p3: smps8 {
 325                         regulator-name = "vreg_s8c_1p3";
 326                         regulator-min-microvolt = <1352000>;
 327                         regulator-max-microvolt = <1352000>;
 328                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 329                 };
 330
 331                 vreg_l1c_1p8: ldo1 {
 332                         regulator-name = "vreg_l1c_1p8";
 333                         regulator-min-microvolt = <1800000>;
 334                         regulator-max-microvolt = <1800000>;
 335                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 336                 };
 337
 338                 vreg_l2c_1p2: ldo2 {
 339                         regulator-name = "vreg_l2c_1p2";
 340                         regulator-min-microvolt = <1200000>;
 341                         regulator-max-microvolt = <1200000>;
 342                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 343                 };
 344
 345                 vreg_l3c_0p92: ldo3 {
 346                         regulator-name = "vreg_l3c_0p92";
 347                         regulator-min-microvolt = <920000>;
 348                         regulator-max-microvolt = <920000>;
 349                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 350                 };
 351
 352                 vreg_l4c_1p7: ldo4 {
 353                         regulator-name = "vreg_l4c_1p7";
 354                         regulator-min-microvolt = <1704000>;
 355                         regulator-max-microvolt = <2928000>;
 356                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 357                 };
 358
 359                 vreg_l5c_1p8: ldo5 {
 360                         regulator-name = "vreg_l5c_1p8";
 361                         regulator-min-microvolt = <1800000>;
 362                         regulator-max-microvolt = <2928000>;
 363                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 364                 };
 365
 366                 vreg_l6c_2p9: ldo6 {
 367                         regulator-name = "vreg_l6c_2p9";
 368                         regulator-min-microvolt = <1800000>;
 369                         regulator-max-microvolt = <2960000>;
 370                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 371                 };
 372
 373                 vreg_l7c_cam_vcm0_2p85: ldo7 {
 374                         regulator-name = "vreg_l7c_cam_vcm0_2p85";
 375                         regulator-min-microvolt = <2856000>;
 376                         regulator-max-microvolt = <3104000>;
 377                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 378                 };
 379
 380                 vreg_l8c_1p8: ldo8 {
 381                         regulator-name = "vreg_l8c_1p8";
 382                         regulator-min-microvolt = <1800000>;
 383                         regulator-max-microvolt = <1800000>;
 384                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 385                 };
 386
 387                 vreg_l9c_2p9: ldo9 {
 388                         regulator-name = "vreg_l9c_2p9";
 389                         regulator-min-microvolt = <2704000>;
 390                         regulator-max-microvolt = <2960000>;
 391                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 392                 };
 393
 394                 vreg_l10c_3p0: ldo10 {
 395                         regulator-name = "vreg_l10c_3p0";
 396                         regulator-min-microvolt = <3000000>;
 397                         regulator-max-microvolt = <3000000>;
 398                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 399                 };
 400
 401                 vreg_l11c_3p3: ldo11 {
 402                         regulator-name = "vreg_l11c_3p3";
 403                         regulator-min-microvolt = <3000000>;
 404                         regulator-max-microvolt = <3312000>;
 405                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 406                 };
 407         };
 408
 409         pm8009-rpmh-regulators {
 410                 compatible = "qcom,pm8009-rpmh-regulators";
 411                 qcom,pmic-id = "f";
 412
 413                 vdd-s1-supply = <&vph_pwr>;
 414                 vdd-s2-supply = <&vreg_bob>;
 415                 vdd-l2-supply = <&vreg_s8c_1p3>;
 416                 vdd-l5-l6-supply = <&vreg_bob>;
 417                 vdd-l7-supply = <&vreg_s4a_1p8>;
 418
 419                 vreg_l1f_cam_dvdd1_1p1: ldo1 {
 420                         regulator-name = "vreg_l1f_cam_dvdd1_1p1";
 421                         regulator-min-microvolt = <1104000>;
 422                         regulator-max-microvolt = <1104000>;
 423                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 424                 };
 425
 426                 vreg_l2f_cam_dvdd0_1p2: ldo2 {
 427                         regulator-name = "vreg_l2f_cam_dvdd0_1p2";
 428                         regulator-min-microvolt = <1200000>;
 429                         regulator-max-microvolt = <1200000>;
 430                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 431                 };
 432
 433                 vreg_l3f_cam_dvdd2_1p05: ldo3 {
 434                         regulator-name = "vreg_l3f_cam_dvdd2_1p05";
 435                         regulator-min-microvolt = <1056000>;
 436                         regulator-max-microvolt = <1056000>;
 437                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 438                 };
 439
 440                 vreg_l5f_cam_avdd0_2p85: ldo5 {
 441                         regulator-name = "vreg_l5f_cam_avdd0_2p85";
 442                         regulator-min-microvolt = <2800000>;
 443                         regulator-max-microvolt = <2800000>;
 444                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 445                 };
 446
 447                 vreg_l6f_cam_avdd1_2p85: ldo6 {
 448                         regulator-name = "vreg_l6f_cam_avdd1_2p85";
 449                         regulator-min-microvolt = <2856000>;
 450                         regulator-max-microvolt = <2856000>;
 451                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 452                 };
 453
 454                 vreg_l7f_1p8: ldo7 {
 455                         regulator-name = "vreg_l7f_1p8";
 456                         regulator-min-microvolt = <1800000>;
 457                         regulator-max-microvolt = <1800000>;
 458                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 459                 };
 460         };
 461 };
 462
 463 &cdsp {
 464         status = "okay";
 465         firmware-name = "qcom/sm8250/cdsp.mbn";
 466 };
 467
 468 &gmu {
 469         status = "okay";
 470 };
 471
 472 &gpu {
 473         status = "okay";
 474
 475         zap-shader {
 476                 memory-region = <&gpu_mem>;
 477                 firmware-name = "qcom/sm8250/a650_zap.mbn";
 478         };
 479 };
 480
 481 &i2c1 {
 482         status = "okay";
 483         clock-frequency = <1000000>;
 484
 485         /* NQ NFC chip @28 */
 486 };
 487
 488 &i2c13 {
 489         status = "okay";
 490
 491         /* st,stmfts @ 49 */
 492 };
 493
 494 &i2c15 {
 495         status = "okay";
 496
 497         /* smb1390 @ 10 */
 498         /* rtc6226 @ 64 */
 499 };
 500
 501 &pm8150_adc {
 502         xo-therm@4c {
 503                 reg = <ADC5_XO_THERM_100K_PU>;
 504                 qcom,ratiometric;
 505                 qcom,hw-settle-time = <200>;
 506         };
 507
 508         skin-therm@4d {
 509                 reg = <ADC5_AMUX_THM1_100K_PU>;
 510                 qcom,ratiometric;
 511                 qcom,hw-settle-time = <200>;
 512         };
 513
 514         pa-therm1@4e {
 515                 reg = <ADC5_AMUX_THM2_100K_PU>;
 516                 qcom,ratiometric;
 517                 qcom,hw-settle-time = <200>;
 518         };
 519 };
 520
 521 &pm8150_adc_tm {
 522         status = "okay";
 523
 524         xo-therm@0 {
 525                 reg = <0>;
 526                 io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
 527                 qcom,ratiometric;
 528                 qcom,hw-settle-time-us = <200>;
 529         };
 530
 531         skin-therm@1 {
 532                 reg = <1>;
 533                 io-channels = <&pm8150_adc ADC5_AMUX_THM1_100K_PU>;
 534                 qcom,ratiometric;
 535                 qcom,hw-settle-time-us = <200>;
 536         };
 537
 538         pa-therm1@2 {
 539                 reg = <2>;
 540                 io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
 541                 qcom,ratiometric;
 542                 qcom,hw-settle-time-us = <200>;
 543         };
 544 };
 545
 546 &pm8150b_adc {
 547         conn-therm@4f {
 548                 reg = <ADC5_AMUX_THM3_100K_PU>;
 549                 qcom,ratiometric;
 550                 qcom,hw-settle-time = <200>;
 551         };
 552 };
 553
 554 &pm8150b_adc_tm {
 555         status = "okay";
 556
 557         conn-therm@0 {
 558                 reg = <0>;
 559                 io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
 560                 qcom,ratiometric;
 561                 qcom,hw-settle-time-us = <200>;
 562         };
 563 };
 564
 565 &pm8150l_adc_tm {
 566         status = "okay";
 567
 568         camera-flash-therm@0 {
 569                 reg = <0>;
 570                 io-channels = <&pm8150l_adc ADC5_AMUX_THM1_100K_PU>;
 571                 qcom,ratiometric;
 572                 qcom,hw-settle-time-us = <200>;
 573         };
 574
 575         skin-msm-therm@1 {
 576                 reg = <1>;
 577                 io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>;
 578                 qcom,ratiometric;
 579                 qcom,hw-settle-time-us = <200>;
 580         };
 581
 582         pa-therm2@2 {
 583                 reg = <2>;
 584                 io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>;
 585                 qcom,ratiometric;
 586                 qcom,hw-settle-time-us = <200>;
 587         };
 588 };
 589
 590 &pm8150l_adc {
 591         camera-flash-therm@4d {
 592                 reg = <ADC5_AMUX_THM1_100K_PU>;
 593                 qcom,ratiometric;
 594                 qcom,hw-settle-time = <200>;
 595         };
 596
 597         skin-msm-therm@4e {
 598                 reg = <ADC5_AMUX_THM2_100K_PU>;
 599                 qcom,ratiometric;
 600                 qcom,hw-settle-time = <200>;
 601         };
 602
 603         pa-therm2@4f {
 604                 reg = <ADC5_AMUX_THM3_100K_PU>;
 605                 qcom,ratiometric;
 606                 qcom,hw-settle-time = <200>;
 607         };
 608 };
 609
 610 &qupv3_id_0 {
 611         status = "okay";
 612 };
 613
 614 &qupv3_id_1 {
 615         status = "okay";
 616 };
 617
 618 &qupv3_id_2 {
 619         status = "okay";
 620 };
 621
 622 &slpi {
 623         status = "okay";
 624         firmware-name = "qcom/sm8250/slpi.mbn";
 625 };
 626
 627 &tlmm {
 628         gpio-reserved-ranges = <28 4>, <40 4>;
 629 };
 630
 631 &uart12 {
 632         status = "okay";
 633 };
 634
 635 &ufs_mem_hc {
 636         status = "okay";
 637
 638         vcc-supply = <&vreg_l17a_3p0>;
 639         vcc-max-microamp = <750000>;
 640         vccq-supply = <&vreg_l6a_1p2>;
 641         vccq-max-microamp = <700000>;
 642         vccq2-supply = <&vreg_s4a_1p8>;
 643         vccq2-max-microamp = <750000>;
 644 };
 645
 646 &ufs_mem_phy {
 647         status = "okay";
 648
 649         vdda-phy-supply = <&vreg_l5a_0p875>;
 650         vdda-max-microamp = <90200>;
 651         vdda-pll-supply = <&vreg_l9a_1p2>;
 652         vdda-pll-max-microamp = <19000>;
 653 };
 654
 655 &usb_1 {
 656         status = "okay";
 657 };
 658
 659 &usb_1_dwc3 {
 660         dr_mode = "host";
 661 };
 662
 663 &usb_1_hsphy {
 664         status = "okay";
 665
 666         vdda-pll-supply = <&vreg_l5a_0p875>;
 667         vdda18-supply = <&vreg_l12a_1p8>;
 668         vdda33-supply = <&vreg_l2a_3p1>;
 669 };
 670
 671 &usb_1_qmpphy {
 672         status = "okay";
 673
 674         vdda-phy-supply = <&vreg_l9a_1p2>;
 675         vdda-pll-supply = <&vreg_l18a_0p9>;
 676 };
 677
 678 &usb_2 {
 679         status = "okay";
 680 };
 681
 682 &usb_2_dwc3 {
 683         dr_mode = "host";
 684 };
 685
 686 &usb_2_hsphy {
 687         status = "okay";
 688
 689         vdda-pll-supply = <&vreg_l5a_0p875>;
 690         vdda18-supply = <&vreg_l12a_1p8>;
 691         vdda33-supply = <&vreg_l2a_3p1>;
 692 };
 693
 694 &usb_2_qmpphy {
 695         status = "okay";
 696
 697         vdda-phy-supply = <&vreg_l9a_1p2>;
 698         vdda-pll-supply = <&vreg_l18a_0p9>;
 699 };
 700
 701 &venus {
 702         status = "okay";
 703 };