arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
   4  */
   5
   6 /dts-v1/;
   7
   8 #include <dt-bindings/gpio/gpio.h>
   9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
  10 #include "sm8150.dtsi"
  11 #include "pm8150.dtsi"
  12 #include "pm8150b.dtsi"
  13 #include "pm8150l.dtsi"
  14
  15 /delete-node/ &cdsp_mem;
  16 /delete-node/ &gpu_mem;
  17 /delete-node/ &ipa_fw_mem;
  18 /delete-node/ &ipa_gsi_mem;
  19 /delete-node/ &mpss_mem;
  20 /delete-node/ &slpi_mem;
  21 /delete-node/ &spss_mem;
  22 /delete-node/ &venus_mem;
  23
  24 / {
  25         qcom,msm-id = <339 0x20000>; /* SM8150 v2 */
  26         qcom,board-id = <8 0>;
  27
  28         chosen {
  29                 #address-cells = <2>;
  30                 #size-cells = <2>;
  31                 ranges;
  32
  33                 framebuffer: framebuffer@9c000000 {
  34                         compatible = "simple-framebuffer";
  35                         reg = <0 0x9c000000 0 0x2300000>;
  36                         width = <1644>;
  37                         height = <3840>;
  38                         stride = <(1644 * 4)>;
  39                         format = "a8r8g8b8";
  40                         /*
  41                          * That's (going to be) a lot of clocks, but it's necessary due
  42                          * to unused clk cleanup & no panel driver yet (& no dispcc either)..
  43                          */
  44                         clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
  45                                  <&gcc GCC_DISP_SF_AXI_CLK>;
  46                 };
  47         };
  48
  49         vph_pwr: vph-pwr-regulator {
  50                 compatible = "regulator-fixed";
  51                 regulator-name = "vph_pwr";
  52                 regulator-min-microvolt = <3700000>;
  53                 regulator-max-microvolt = <3700000>;
  54         };
  55
  56         /*
  57          * Apparently RPMh does not provide support for PM8150 S4 because it
  58          * is always-on; model it as a fixed regulator.
  59          */
  60         vreg_s4a_1p8: pm8150-s4 {
  61                 compatible = "regulator-fixed";
  62                 regulator-name = "vreg_s4a_1p8";
  63
  64                 regulator-min-microvolt = <1800000>;
  65                 regulator-max-microvolt = <1800000>;
  66
  67                 regulator-always-on;
  68                 regulator-boot-on;
  69
  70                 vin-supply = <&vph_pwr>;
  71         };
  72
  73         reserved-memory {
  74                 mpss_mem: memory@8dc00000 {
  75                         reg = <0x0 0x8dc00000 0x0 0x9600000>;
  76                         no-map;
  77                 };
  78
  79                 venus_mem: memory@97200000 {
  80                         reg = <0x0 0x97200000 0x0 0x500000>;
  81                         no-map;
  82                 };
  83
  84                 slpi_mem: memory@97700000 {
  85                         reg = <0x0 0x97700000 0x0 0x1400000>;
  86                         no-map;
  87                 };
  88
  89                 ipa_fw_mem: memory@98b00000 {
  90                         reg = <0x0 0x98b00000 0x0 0x10000>;
  91                         no-map;
  92                 };
  93
  94                 ipa_gsi_mem: memory@98b10000 {
  95                         reg = <0x0 0x98b10000 0x0 0x5000>;
  96                         no-map;
  97                 };
  98
  99                 gpu_mem: memory@98b15000 {
 100                         reg = <0x0 0x98b15000 0x0 0x2000>;
 101                         no-map;
 102                 };
 103
 104                 spss_mem: memory@98c00000 {
 105                         reg = <0x0 0x98c00000 0x0 0x100000>;
 106                         no-map;
 107                 };
 108
 109                 cdsp_mem: memory@98d00000 {
 110                         reg = <0x0 0x98d00000 0x0 0x1400000>;
 111                         no-map;
 112                 };
 113
 114                 cont_splash_mem: memory@9c000000 {
 115                         reg = <0x0 0x9c000000 0x0 0x2400000>;
 116                         no-map;
 117                 };
 118
 119                 cdsp_sec_mem: memory@a4c00000 {
 120                         reg = <0x0 0xa4c00000 0x0 0x3c00000>;
 121                         no-map;
 122                 };
 123
 124                 ramoops@ffc00000 {
 125                         compatible = "ramoops";
 126                         reg = <0x0 0xffc00000 0x0 0x100000>;
 127                         record-size = <0x1000>;
 128                         console-size = <0x40000>;
 129                         msg-size = <0x20000 0x20000>;
 130                         ecc-size = <16>;
 131                         no-map;
 132                 };
 133         };
 134 };
 135
 136 &adsp_mem {
 137         reg = <0x0 0x8be00000 0x0 0x1e00000>;
 138 };
 139
 140 &apps_rsc {
 141         pm8150-rpmh-regulators {
 142                 compatible = "qcom,pm8150-rpmh-regulators";
 143                 qcom,pmic-id = "a";
 144
 145                 vdd-s1-supply = <&vph_pwr>;
 146                 vdd-s2-supply = <&vph_pwr>;
 147                 vdd-s3-supply = <&vph_pwr>;
 148                 vdd-s4-supply = <&vph_pwr>;
 149                 vdd-s5-supply = <&vph_pwr>;
 150                 vdd-s6-supply = <&vph_pwr>;
 151                 vdd-s7-supply = <&vph_pwr>;
 152                 vdd-s8-supply = <&vph_pwr>;
 153                 vdd-s9-supply = <&vph_pwr>;
 154                 vdd-s10-supply = <&vph_pwr>;
 155
 156                 vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
 157                 vdd-l2-l10-supply = <&vreg_bob>;
 158                 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>;
 159                 vdd-l6-l9-supply = <&vreg_s8c_1p3>;
 160                 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
 161                 vdd-l13-l16-l17-supply = <&vreg_bob>;
 162
 163                 vreg_s2a_0p6: smps2 {
 164                         regulator-min-microvolt = <600000>;
 165                         regulator-max-microvolt = <600000>;
 166                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 167                 };
 168
 169                 vreg_s5a_1p9: smps5 {
 170                         regulator-min-microvolt = <1904000>;
 171                         regulator-max-microvolt = <2040000>;
 172                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 173                 };
 174
 175                 vreg_s6a_0p9: smps6 {
 176                         regulator-min-microvolt = <920000>;
 177                         regulator-max-microvolt = <1128000>;
 178                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 179                 };
 180
 181                 vreg_l1a_0p75: ldo1 {
 182                         regulator-min-microvolt = <752000>;
 183                         regulator-max-microvolt = <752000>;
 184                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 185                 };
 186
 187                 vreg_l2a_3p1: ldo2 {
 188                         regulator-min-microvolt = <3072000>;
 189                         regulator-max-microvolt = <3072000>;
 190                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 191                 };
 192
 193                 vreg_l3a_0p8: ldo3 {
 194                         regulator-min-microvolt = <480000>;
 195                         regulator-max-microvolt = <932000>;
 196                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 197                 };
 198
 199                 vreg_l5a_0p875: ldo5 {
 200                         regulator-min-microvolt = <880000>;
 201                         regulator-max-microvolt = <880000>;
 202                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 203                 };
 204
 205                 vreg_l6a_1p2: ldo6 {
 206                         regulator-min-microvolt = <1200000>;
 207                         regulator-max-microvolt = <1200000>;
 208                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 209                 };
 210
 211                 vreg_l7a_1p8: ldo7 {
 212                         regulator-min-microvolt = <1800000>;
 213                         regulator-max-microvolt = <1800000>;
 214                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 215                 };
 216
 217                 vreg_l9a_1p2: ldo9 {
 218                         regulator-min-microvolt = <1200000>;
 219                         regulator-max-microvolt = <1200000>;
 220                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 221                 };
 222
 223                 vreg_l10a_2p5: ldo10 {
 224                         regulator-min-microvolt = <2504000>;
 225                         regulator-max-microvolt = <2960000>;
 226                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 227                 };
 228
 229                 vreg_l11a_0p8: ldo11 {
 230                         regulator-min-microvolt = <800000>;
 231                         regulator-max-microvolt = <800000>;
 232                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 233                 };
 234
 235                 vreg_l12a_1p8: ldo12 {
 236                         regulator-min-microvolt = <1800000>;
 237                         regulator-max-microvolt = <1800000>;
 238                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 239                 };
 240
 241                 /* L13 is unused. */
 242
 243                 vreg_l14a_1p8: ldo14 {
 244                         regulator-min-microvolt = <1800000>;
 245                         regulator-max-microvolt = <1800000>;
 246                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 247                 };
 248
 249                 vreg_l15a_1p7: ldo15 {
 250                         regulator-min-microvolt = <1704000>;
 251                         regulator-max-microvolt = <1704000>;
 252                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 253                 };
 254
 255                 vreg_l16a_2p7: ldo16 {
 256                         regulator-min-microvolt = <2704000>;
 257                         regulator-max-microvolt = <2960000>;
 258                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 259                 };
 260
 261                 vreg_l17a_3p0: ldo17 {
 262                         regulator-min-microvolt = <2856000>;
 263                         regulator-max-microvolt = <3008000>;
 264                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 265                 };
 266
 267                 vreg_l18a_0p8: ldo18 {
 268                         regulator-min-microvolt = <880000>;
 269                         regulator-max-microvolt = <912000>;
 270                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 271                 };
 272         };
 273
 274         pm8150l-rpmh-regulators {
 275                 compatible = "qcom,pm8150l-rpmh-regulators";
 276                 qcom,pmic-id = "c";
 277
 278                 vdd-s1-supply = <&vph_pwr>;
 279                 vdd-s2-supply = <&vph_pwr>;
 280                 vdd-s3-supply = <&vph_pwr>;
 281                 vdd-s4-supply = <&vph_pwr>;
 282                 vdd-s5-supply = <&vph_pwr>;
 283                 vdd-s6-supply = <&vph_pwr>;
 284                 vdd-s7-supply = <&vph_pwr>;
 285                 vdd-s8-supply = <&vph_pwr>;
 286
 287                 vdd-l1-l8-supply = <&vreg_s4a_1p8>;
 288                 vdd-l2-l3-supply = <&vreg_s8c_1p3>;
 289                 vdd-l4-l5-l6-supply = <&vreg_bob>;
 290                 vdd-l7-l11-supply = <&vreg_bob>;
 291                 vdd-l9-l10-supply = <&vreg_bob>;
 292
 293                 vdd-bob-supply = <&vph_pwr>;
 294                 vdd-flash-supply = <&vreg_bob>;
 295                 vdd-rgb-supply = <&vreg_bob>;
 296
 297                 vreg_bob: bob {
 298                         regulator-min-microvolt = <3350000>;
 299                         regulator-max-microvolt = <4000000>;
 300                         regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 301                         regulator-allow-bypass;
 302                 };
 303
 304                 vreg_s1c_1p1: smps1 {
 305                         regulator-min-microvolt = <1128000>;
 306                         regulator-max-microvolt = <1128000>;
 307                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 308                 };
 309
 310                 vreg_s8c_1p3: smps8 {
 311                         regulator-min-microvolt = <1352000>;
 312                         regulator-max-microvolt = <1352000>;
 313                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 314                 };
 315
 316                 vreg_l1c_1p8: ldo1 {
 317                         regulator-min-microvolt = <1800000>;
 318                         regulator-max-microvolt = <1800000>;
 319                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 320                 };
 321
 322                 vreg_l2c_1p3: ldo2 {
 323                         regulator-min-microvolt = <1304000>;
 324                         regulator-max-microvolt = <1304000>;
 325                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 326                 };
 327
 328                 vreg_l3c_1p2: ldo3 {
 329                         regulator-min-microvolt = <1200000>;
 330                         regulator-max-microvolt = <1200000>;
 331                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 332                 };
 333
 334                 vreg_l4c_1p8: ldo4 {
 335                         regulator-min-microvolt = <1704000>;
 336                         regulator-max-microvolt = <2928000>;
 337                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 338                 };
 339
 340                 vreg_l5c_1p8: ldo5 {
 341                         regulator-min-microvolt = <1704000>;
 342                         regulator-max-microvolt = <2928000>;
 343                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 344                 };
 345
 346                 vreg_l6c_2p9: ldo6 {
 347                         regulator-min-microvolt = <1800000>;
 348                         regulator-max-microvolt = <2960000>;
 349                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 350                         regulator-allow-set-load;
 351                 };
 352
 353                 vreg_l7c_3p0: ldo7 {
 354                         regulator-min-microvolt = <2856000>;
 355                         regulator-max-microvolt = <3104000>;
 356                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 357                 };
 358
 359                 vreg_l8c_1p8: ldo8 {
 360                         regulator-min-microvolt = <1800000>;
 361                         regulator-max-microvolt = <1800000>;
 362                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 363                 };
 364
 365                 vreg_l9c_2p9: ldo9 {
 366                         regulator-min-microvolt = <2704000>;
 367                         regulator-max-microvolt = <2960000>;
 368                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 369                         regulator-allow-set-load;
 370                 };
 371
 372                 vreg_l10c_3p3: ldo10 {
 373                         regulator-min-microvolt = <3000000>;
 374                         regulator-max-microvolt = <3312000>;
 375                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 376                 };
 377
 378                 vreg_l11c_3p3: ldo11 {
 379                         regulator-min-microvolt = <3000000>;
 380                         regulator-max-microvolt = <3312000>;
 381                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 382                 };
 383         };
 384
 385         /* PM8009 is not present on these boards, even if downstream sources suggest so. */
 386 };
 387
 388 &i2c4 {
 389         status = "okay";
 390
 391         /* Qcom SMB1355 @ c */
 392         /* Qcom SMB1390 @ 10 */
 393         /* NXP PN553 NFC @ 28 */
 394         /* Qcom FSA4480 USB-C audio switch @ 43 */
 395 };
 396
 397 &i2c7 {
 398         status = "okay";
 399
 400         /* AMS TCS3490 RGB+IR color sensor @ 72 */
 401 };
 402
 403 &i2c10 {
 404         status = "okay";
 405
 406         /* Samsung touchscreen @ 48 */
 407 };
 408
 409 &pon_pwrkey {
 410         status = "okay";
 411 };
 412
 413 &qupv3_id_0 {
 414         status = "okay";
 415 };
 416
 417 &qupv3_id_1 {
 418         status = "okay";
 419 };
 420
 421 &tlmm {
 422         gpio-reserved-ranges = <126 4>;
 423 };
 424
 425 &uart2 {
 426         status = "okay";
 427 };
 428
 429 /* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
 430 &ufs_mem_hc { status = "disabled"; };
 431 &ufs_mem_phy { status = "disabled"; };
 432
 433 &usb_1 {
 434         status = "okay";
 435 };
 436
 437 &usb_1_dwc3 {
 438         dr_mode = "peripheral";
 439 };
 440
 441 &usb_1_hsphy {
 442         status = "okay";
 443         vdda-pll-supply = <&vreg_l5a_0p875>;
 444         vdda33-supply = <&vreg_l2a_3p1>;
 445         vdda18-supply = <&vreg_l12a_1p8>;
 446 };
 447
 448 &usb_1_qmpphy {
 449         status = "okay";
 450         vdda-phy-supply = <&vreg_l3c_1p2>;
 451         vdda-pll-supply = <&vreg_l18a_0p8>;
 452 };