d7591a4621a2fd56a0e248af7887beb772040017
[linux-2.6-microblaze.git] / arch / arm64 / boot / dts / qcom / sdm850-lenovo-yoga-c630.dts
1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3  * Lenovo Yoga C630
4  *
5  * Copyright (c) 2019, Linaro Ltd.
6  */
7
8 /dts-v1/;
9
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/input/gpio-keys.h>
12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
14 #include <dt-bindings/sound/qcom,q6afe.h>
15 #include <dt-bindings/sound/qcom,q6asm.h>
16 #include "sdm850.dtsi"
17 #include "pm8998.dtsi"
18
19 / {
20         model = "Lenovo Yoga C630";
21         compatible = "lenovo,yoga-c630", "qcom,sdm845";
22
23         aliases {
24                 hsuart0 = &uart6;
25         };
26
27         gpio-keys {
28                 compatible = "gpio-keys";
29
30                 pinctrl-names = "default";
31                 pinctrl-0 = <&lid_pin_active>, <&mode_pin_active>;
32
33                 lid {
34                         gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;
35                         linux,input-type = <EV_SW>;
36                         linux,code = <SW_LID>;
37                         wakeup-source;
38                         wakeup-event-action = <EV_ACT_DEASSERTED>;
39                 };
40
41                 mode {
42                         gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
43                         linux,input-type = <EV_SW>;
44                         linux,code = <SW_TABLET_MODE>;
45                 };
46         };
47
48         panel {
49                 compatible = "boe,nv133fhm-n61";
50                 no-hpd;
51
52                 ports {
53                         port {
54                                 panel_in_edp: endpoint {
55                                         remote-endpoint = <&sn65dsi86_out>;
56                                 };
57                         };
58                 };
59         };
60
61         sn65dsi86_refclk: sn65dsi86-refclk {
62                 compatible = "fixed-clock";
63                 #clock-cells = <0>;
64
65                 clock-frequency = <19200000>;
66         };
67 };
68
69 &adsp_pas {
70         firmware-name = "qcom/LENOVO/81JL/qcadsp850.mbn";
71         status = "okay";
72 };
73
74 &apps_rsc {
75         pm8998-rpmh-regulators {
76                 compatible = "qcom,pm8998-rpmh-regulators";
77                 qcom,pmic-id = "a";
78
79                 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
80                 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
81
82                 vreg_s2a_1p125: smps2 {
83                 };
84
85                 vreg_s3a_1p35: smps3 {
86                         regulator-min-microvolt = <1352000>;
87                         regulator-max-microvolt = <1352000>;
88                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
89                 };
90
91                 vreg_s4a_1p8: smps4 {
92                         regulator-min-microvolt = <1800000>;
93                         regulator-max-microvolt = <1800000>;
94                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
95                 };
96
97                 vreg_s5a_2p04: smps5 {
98                         regulator-min-microvolt = <2040000>;
99                         regulator-max-microvolt = <2040000>;
100                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
101                 };
102
103                 vreg_s7a_1p025: smps7 {
104                 };
105
106                 vdd_qusb_hs0:
107                 vdda_hp_pcie_core:
108                 vdda_mipi_csi0_0p9:
109                 vdda_mipi_csi1_0p9:
110                 vdda_mipi_csi2_0p9:
111                 vdda_mipi_dsi0_pll:
112                 vdda_mipi_dsi1_pll:
113                 vdda_qlink_lv:
114                 vdda_qlink_lv_ck:
115                 vdda_qrefs_0p875:
116                 vdda_pcie_core:
117                 vdda_pll_cc_ebi01:
118                 vdda_pll_cc_ebi23:
119                 vdda_sp_sensor:
120                 vdda_ufs1_core:
121                 vdda_ufs2_core:
122                 vdda_usb1_ss_core:
123                 vdda_usb2_ss_core:
124                 vreg_l1a_0p875: ldo1 {
125                         regulator-min-microvolt = <880000>;
126                         regulator-max-microvolt = <880000>;
127                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
128                 };
129
130                 vddpx_10:
131                 vreg_l2a_1p2: ldo2 {
132                         regulator-min-microvolt = <1200000>;
133                         regulator-max-microvolt = <1200000>;
134                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
135                         regulator-always-on;
136                 };
137
138                 vreg_l3a_1p0: ldo3 {
139                 };
140
141                 vdd_wcss_cx:
142                 vdd_wcss_mx:
143                 vdda_wcss_pll:
144                 vreg_l5a_0p8: ldo5 {
145                         regulator-min-microvolt = <800000>;
146                         regulator-max-microvolt = <800000>;
147                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
148                 };
149
150                 vddpx_13:
151                 vreg_l6a_1p8: ldo6 {
152                         regulator-min-microvolt = <1800000>;
153                         regulator-max-microvolt = <1800000>;
154                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
155                 };
156
157                 vreg_l7a_1p8: ldo7 {
158                         regulator-min-microvolt = <1800000>;
159                         regulator-max-microvolt = <1800000>;
160                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
161                 };
162
163                 vreg_l8a_1p2: ldo8 {
164                 };
165
166                 vreg_l9a_1p8: ldo9 {
167                 };
168
169                 vreg_l10a_1p8: ldo10 {
170                 };
171
172                 vreg_l11a_1p0: ldo11 {
173                 };
174
175                 vdd_qfprom:
176                 vdd_qfprom_sp:
177                 vdda_apc1_cs_1p8:
178                 vdda_gfx_cs_1p8:
179                 vdda_qrefs_1p8:
180                 vdda_qusb_hs0_1p8:
181                 vddpx_11:
182                 vreg_l12a_1p8: ldo12 {
183                         regulator-min-microvolt = <1800000>;
184                         regulator-max-microvolt = <1800000>;
185                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
186                 };
187
188                 vddpx_2:
189                 vreg_l13a_2p95: ldo13 {
190                 };
191
192                 vreg_l14a_1p88: ldo14 {
193                         regulator-min-microvolt = <1880000>;
194                         regulator-max-microvolt = <1880000>;
195                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
196                         regulator-always-on;
197                 };
198
199                 vreg_l15a_1p8: ldo15 {
200                 };
201
202                 vreg_l16a_2p7: ldo16 {
203                 };
204
205                 vreg_l17a_1p3: ldo17 {
206                         regulator-min-microvolt = <1304000>;
207                         regulator-max-microvolt = <1304000>;
208                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
209                 };
210
211                 vreg_l18a_2p7: ldo18 {
212                 };
213
214                 vreg_l19a_3p0: ldo19 {
215                         regulator-min-microvolt = <3100000>;
216                         regulator-max-microvolt = <3108000>;
217                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
218                 };
219
220                 vreg_l20a_2p95: ldo20 {
221                         regulator-min-microvolt = <2960000>;
222                         regulator-max-microvolt = <2960000>;
223                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
224                 };
225
226                 vreg_l21a_2p95: ldo21 {
227                 };
228
229                 vreg_l22a_2p85: ldo22 {
230                 };
231
232                 vreg_l23a_3p3: ldo23 {
233                 };
234
235                 vdda_qusb_hs0_3p1:
236                 vreg_l24a_3p075: ldo24 {
237                         regulator-min-microvolt = <3075000>;
238                         regulator-max-microvolt = <3083000>;
239                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
240                 };
241
242                 vreg_l25a_3p3: ldo25 {
243                         regulator-min-microvolt = <3104000>;
244                         regulator-max-microvolt = <3112000>;
245                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
246                 };
247
248                 vdda_hp_pcie_1p2:
249                 vdda_hv_ebi0:
250                 vdda_hv_ebi1:
251                 vdda_hv_ebi2:
252                 vdda_hv_ebi3:
253                 vdda_mipi_csi_1p25:
254                 vdda_mipi_dsi0_1p2:
255                 vdda_mipi_dsi1_1p2:
256                 vdda_pcie_1p2:
257                 vdda_ufs1_1p2:
258                 vdda_ufs2_1p2:
259                 vdda_usb1_ss_1p2:
260                 vdda_usb2_ss_1p2:
261                 vreg_l26a_1p2: ldo26 {
262                         regulator-min-microvolt = <1200000>;
263                         regulator-max-microvolt = <1208000>;
264                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
265                 };
266
267                 vreg_l28a_3p0: ldo28 {
268                 };
269
270                 vreg_lvs1a_1p8: lvs1 {
271                 };
272
273                 vreg_lvs2a_1p8: lvs2 {
274                 };
275         };
276 };
277
278 &cdsp_pas {
279         firmware-name = "qcom/LENOVO/81JL/qccdsp850.mbn";
280         status = "okay";
281 };
282
283 &dsi0 {
284         status = "okay";
285         vdda-supply = <&vreg_l26a_1p2>;
286
287         ports {
288                 port@1 {
289                         endpoint {
290                                 remote-endpoint = <&sn65dsi86_in_a>;
291                                 data-lanes = <0 1 2 3>;
292                         };
293                 };
294         };
295 };
296
297 &dsi0_phy {
298         status = "okay";
299         vdds-supply = <&vreg_l1a_0p875>;
300 };
301
302 &gcc {
303         protected-clocks = <GCC_QSPI_CORE_CLK>,
304                            <GCC_QSPI_CORE_CLK_SRC>,
305                            <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
306                            <GCC_LPASS_Q6_AXI_CLK>,
307                            <GCC_LPASS_SWAY_CLK>;
308 };
309
310 &gpu {
311         zap-shader {
312                 memory-region = <&gpu_mem>;
313                 firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn";
314         };
315 };
316
317 &i2c1 {
318         status = "okay";
319         clock-frequency = <400000>;
320 };
321
322 &i2c3 {
323         status = "okay";
324         clock-frequency = <400000>;
325         /* Overwrite pinctrl-0 from sdm845.dtsi */
326         pinctrl-0 = <&qup_i2c3_default &i2c3_hid_active>;
327
328         tsel: hid@15 {
329                 compatible = "hid-over-i2c";
330                 reg = <0x15>;
331                 hid-descr-addr = <0x1>;
332
333                 interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
334         };
335
336         tsc2: hid@2c {
337                 compatible = "hid-over-i2c";
338                 reg = <0x2c>;
339                 hid-descr-addr = <0x20>;
340
341                 interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
342         };
343 };
344
345 &i2c5 {
346         status = "okay";
347         clock-frequency = <400000>;
348
349         tsc1: hid@10 {
350                 compatible = "hid-over-i2c";
351                 reg = <0x10>;
352                 hid-descr-addr = <0x1>;
353
354                 interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>;
355
356                 pinctrl-names = "default";
357                 pinctrl-0 = <&i2c5_hid_active>;
358         };
359 };
360
361 &i2c10 {
362         status = "okay";
363         clock-frequency = <400000>;
364
365         sn65dsi86: bridge@2c {
366                 compatible = "ti,sn65dsi86";
367                 reg = <0x2c>;
368                 pinctrl-names = "default";
369                 pinctrl-0 = <&sn65dsi86_pin_active>;
370
371                 enable-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
372
373                 vpll-supply = <&vreg_l14a_1p88>;
374                 vccio-supply = <&vreg_l14a_1p88>;
375
376                 clocks = <&sn65dsi86_refclk>;
377                 clock-names = "refclk";
378
379                 no-hpd;
380
381                 ports {
382                         #address-cells = <1>;
383                         #size-cells = <0>;
384
385                         port@0 {
386                                 reg = <0>;
387                                 sn65dsi86_in_a: endpoint {
388                                         remote-endpoint = <&dsi0_out>;
389                                 };
390                         };
391
392                         port@1 {
393                                 reg = <1>;
394                                 sn65dsi86_out: endpoint {
395                                         remote-endpoint = <&panel_in_edp>;
396                                 };
397                         };
398                 };
399         };
400 };
401
402 &i2c11 {
403         status = "okay";
404         clock-frequency = <400000>;
405
406         ecsh: hid@5c {
407                 compatible = "hid-over-i2c";
408                 reg = <0x5c>;
409                 hid-descr-addr = <0x1>;
410
411                 interrupts-extended = <&tlmm 92 IRQ_TYPE_LEVEL_LOW>;
412
413                 pinctrl-names = "default";
414                 pinctrl-0 = <&i2c11_hid_active>;
415         };
416 };
417
418 &mdss {
419         status = "okay";
420 };
421
422 &mdss_mdp {
423         status = "okay";
424 };
425
426 &mss_pil {
427         firmware-name = "qcom/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/LENOVO/81JL/qcdsp2850.mbn";
428 };
429
430 &qup_i2c10_default {
431         pinconf {
432                 pins = "gpio55", "gpio56";
433                 drive-strength = <2>;
434                 bias-disable;
435         };
436 };
437
438 &qup_i2c12_default {
439         drive-strength = <2>;
440         bias-disable;
441 };
442
443 &qup_uart6_default {
444         pinmux {
445                  pins = "gpio45", "gpio46", "gpio47", "gpio48";
446                  function = "qup6";
447         };
448
449         cts {
450                 pins = "gpio45";
451                 bias-pull-down;
452         };
453
454         rts-tx {
455                 pins = "gpio46", "gpio47";
456                 drive-strength = <2>;
457                 bias-disable;
458         };
459
460         rx {
461                 pins = "gpio48";
462                 bias-pull-up;
463         };
464 };
465
466 &qupv3_id_0 {
467         status = "okay";
468 };
469
470 &qupv3_id_1 {
471         status = "okay";
472 };
473
474 &q6asmdai {
475         dai@0 {
476                 reg = <0>;
477         };
478
479         dai@1 {
480                 reg = <1>;
481         };
482 };
483
484 &sound {
485         compatible = "qcom,db845c-sndcard";
486         model = "Lenovo-YOGA-C630-13Q50";
487
488         audio-routing =
489                 "RX_BIAS", "MCLK",
490                 "AMIC2", "MIC BIAS2",
491                 "SpkrLeft IN", "SPK1 OUT",
492                 "SpkrRight IN", "SPK2 OUT",
493                 "MM_DL1",  "MultiMedia1 Playback",
494                 "MultiMedia2 Capture", "MM_UL2";
495
496         mm1-dai-link {
497                 link-name = "MultiMedia1";
498                 cpu {
499                         sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
500                 };
501         };
502
503         mm2-dai-link {
504                 link-name = "MultiMedia2";
505                 cpu {
506                         sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
507                 };
508         };
509
510         slim-dai-link {
511                 link-name = "SLIM Playback";
512                 cpu {
513                         sound-dai = <&q6afedai SLIMBUS_0_RX>;
514                 };
515
516                 platform {
517                         sound-dai = <&q6routing>;
518                 };
519
520                 codec {
521                         sound-dai =  <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
522                 };
523         };
524
525         slimcap-dai-link {
526                 link-name = "SLIM Capture";
527                 cpu {
528                         sound-dai = <&q6afedai SLIMBUS_0_TX>;
529                 };
530
531                 platform {
532                         sound-dai = <&q6routing>;
533                 };
534
535                 codec {
536                         sound-dai = <&wcd9340 1>;
537                 };
538         };
539 };
540
541 &tlmm {
542         gpio-reserved-ranges = <0 4>, <81 4>;
543
544         sn65dsi86_pin_active: sn65dsi86-enable {
545                 pins = "gpio96";
546                 drive-strength = <2>;
547                 bias-disable;
548         };
549
550         i2c3_hid_active: i2c2-hid-active {
551                 pins = "gpio37";
552                 function = "gpio";
553
554                 input-enable;
555                 bias-pull-up;
556                 drive-strength = <2>;
557         };
558
559         i2c5_hid_active: i2c5-hid-active {
560                 pins = "gpio125";
561                 function = "gpio";
562
563                 input-enable;
564                 bias-pull-up;
565                 drive-strength = <2>;
566         };
567
568         i2c11_hid_active: i2c11-hid-active {
569                 pins = "gpio92";
570                 function = "gpio";
571
572                 input-enable;
573                 bias-pull-up;
574                 drive-strength = <2>;
575         };
576
577         wcd_intr_default: wcd_intr_default {
578                 pins = "gpio54";
579                 function = "gpio";
580
581                 input-enable;
582                 bias-pull-down;
583                 drive-strength = <2>;
584         };
585
586         lid_pin_active: lid-pin {
587                 pins = "gpio124";
588                 function = "gpio";
589
590                 input-enable;
591                 bias-disable;
592         };
593
594         mode_pin_active: mode-pin {
595                 pins = "gpio95";
596                 function = "gpio";
597
598                 input-enable;
599                 bias-disable;
600         };
601 };
602
603 &uart6 {
604         status = "okay";
605
606         bluetooth {
607                 compatible = "qcom,wcn3990-bt";
608
609                 vddio-supply = <&vreg_s4a_1p8>;
610                 vddxo-supply = <&vreg_l7a_1p8>;
611                 vddrf-supply = <&vreg_l17a_1p3>;
612                 vddch0-supply = <&vreg_l25a_3p3>;
613                 max-speed = <3200000>;
614         };
615 };
616
617 &ufs_mem_hc {
618         status = "okay";
619
620         reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
621
622         vcc-supply = <&vreg_l20a_2p95>;
623         vcc-max-microamp = <600000>;
624 };
625
626 &ufs_mem_phy {
627         status = "okay";
628
629         vdda-phy-supply = <&vdda_ufs1_core>;
630         vdda-pll-supply = <&vdda_ufs1_1p2>;
631 };
632
633 &usb_1 {
634         status = "okay";
635 };
636
637 &usb_1_dwc3 {
638         dr_mode = "host";
639 };
640
641 &usb_1_hsphy {
642         status = "okay";
643
644         vdd-supply = <&vdda_usb1_ss_core>;
645         vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
646         vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
647
648         qcom,imp-res-offset-value = <8>;
649         qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
650         qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
651         qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
652 };
653
654 &usb_1_qmpphy {
655         status = "okay";
656
657         vdda-phy-supply = <&vdda_usb1_ss_1p2>;
658         vdda-pll-supply = <&vdda_usb1_ss_core>;
659 };
660
661 &usb_2 {
662         status = "okay";
663 };
664
665 &usb_2_dwc3 {
666         dr_mode = "host";
667 };
668
669 &usb_2_hsphy {
670         status = "okay";
671
672         vdd-supply = <&vdda_usb2_ss_core>;
673         vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
674         vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
675
676         qcom,imp-res-offset-value = <8>;
677         qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
678 };
679
680 &usb_2_qmpphy {
681         status = "okay";
682
683         vdda-phy-supply = <&vdda_usb2_ss_1p2>;
684         vdda-pll-supply = <&vdda_usb2_ss_core>;
685 };
686
687 &wcd9340{
688         pinctrl-0 = <&wcd_intr_default>;
689         pinctrl-names = "default";
690         clock-names = "extclk";
691         clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
692         reset-gpios = <&tlmm 64 0>;
693         vdd-buck-supply = <&vreg_s4a_1p8>;
694         vdd-buck-sido-supply = <&vreg_s4a_1p8>;
695         vdd-tx-supply = <&vreg_s4a_1p8>;
696         vdd-rx-supply = <&vreg_s4a_1p8>;
697         vdd-io-supply = <&vreg_s4a_1p8>;
698
699         swm: swm@c85 {
700                 left_spkr: wsa8810-left{
701                         compatible = "sdw10217211000";
702                         reg = <0 3>;
703                         powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
704                         #thermal-sensor-cells = <0>;
705                         sound-name-prefix = "SpkrLeft";
706                         #sound-dai-cells = <0>;
707                 };
708
709                 right_spkr: wsa8810-right{
710                         compatible = "sdw10217211000";
711                         powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
712                         reg = <0 4>;
713                         #thermal-sensor-cells = <0>;
714                         sound-name-prefix = "SpkrRight";
715                         #sound-dai-cells = <0>;
716                 };
717         };
718 };
719
720 &wifi {
721         status = "okay";
722
723         vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
724         vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
725         vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
726         vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
727
728         qcom,snoc-host-cap-8bit-quirk;
729 };