arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * SDM845 OnePlus 6(T) (enchilada / fajita) common device tree source
   4  *
   5  * Copyright (c) 2020, The Linux Foundation. All rights reserved.
   6  */
   7
   8 /dts-v1/;
   9
  10 #include <dt-bindings/input/linux-event-codes.h>
  11 #include <dt-bindings/leds/common.h>
  12 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
  13 #include <dt-bindings/sound/qcom,q6afe.h>
  14 #include <dt-bindings/sound/qcom,q6asm.h>
  15
  16 #include "sdm845.dtsi"
  17 #include "sdm845-wcd9340.dtsi"
  18 #include "pm8998.dtsi"
  19 #include "pmi8998.dtsi"
  20
  21 /delete-node/ &rmtfs_mem;
  22
  23 / {
  24         aliases {
  25                 serial0 = &uart9;
  26                 serial1 = &uart6;
  27         };
  28
  29         chosen {
  30                 stdout-path = "serial0:115200n8";
  31         };
  32
  33         gpio-hall-sensor {
  34                 compatible = "gpio-keys";
  35                 label = "Hall effect sensor";
  36
  37                 pinctrl-0 = <&hall_sensor_default>;
  38                 pinctrl-names = "default";
  39
  40                 event-hall-sensor {
  41                         gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
  42                         label = "Hall Effect Sensor";
  43                         linux,input-type = <EV_SW>;
  44                         linux,code = <SW_LID>;
  45                         linux,can-disable;
  46                         wakeup-source;
  47                 };
  48         };
  49
  50         gpio-keys {
  51                 compatible = "gpio-keys";
  52                 label = "Volume keys";
  53                 autorepeat;
  54
  55                 pinctrl-names = "default";
  56                 pinctrl-0 = <&volume_down_gpio &volume_up_gpio>;
  57
  58                 key-vol-down {
  59                         label = "Volume down";
  60                         linux,code = <KEY_VOLUMEDOWN>;
  61                         gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
  62                         debounce-interval = <15>;
  63                 };
  64
  65                 key-vol-up {
  66                         label = "Volume up";
  67                         linux,code = <KEY_VOLUMEUP>;
  68                         gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
  69                         debounce-interval = <15>;
  70                 };
  71         };
  72
  73         reserved-memory {
  74                 /*
  75                  * The rmtfs_mem needs to be guarded due to "XPU limitations"
  76                  * it is otherwise possible for an allocation adjacent to the
  77                  * rmtfs_mem region to trigger an XPU violation, causing a crash.
  78                  */
  79                 rmtfs_lower_guard: rmtfs-lower-guard@f5b00000 {
  80                         no-map;
  81                         reg = <0 0xf5b00000 0 0x1000>;
  82                 };
  83                 /*
  84                  * The rmtfs memory region in downstream is 'dynamically allocated'
  85                  * but given the same address every time. Hard code it as this address is
  86                  * where the modem firmware expects it to be.
  87                  */
  88                 rmtfs_mem: rmtfs-mem@f5b01000 {
  89                         compatible = "qcom,rmtfs-mem";
  90                         reg = <0 0xf5b01000 0 0x200000>;
  91                         no-map;
  92
  93                         qcom,client-id = <1>;
  94                         qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
  95                 };
  96                 rmtfs_upper_guard: rmtfs-upper-guard@f5d01000 {
  97                         no-map;
  98                         reg = <0 0xf5d01000 0 0x1000>;
  99                 };
 100
 101                 /*
 102                  * It seems like reserving the old rmtfs_mem region is also needed to prevent
 103                  * random crashes which are most likely modem related, more testing needed.
 104                  */
 105                 removed_region: removed-region@88f00000 {
 106                         no-map;
 107                         reg = <0 0x88f00000 0 0x1c00000>;
 108                 };
 109
 110                 ramoops: ramoops@ac300000 {
 111                         compatible = "ramoops";
 112                         reg = <0 0xac300000 0 0x400000>;
 113                         record-size = <0x40000>;
 114                         console-size = <0x40000>;
 115                         ftrace-size = <0x40000>;
 116                         pmsg-size = <0x200000>;
 117                         ecc-size = <16>;
 118                 };
 119         };
 120
 121         vph_pwr: vph-pwr-regulator {
 122                 compatible = "regulator-fixed";
 123                 regulator-name = "vph_pwr";
 124                 regulator-min-microvolt = <3700000>;
 125                 regulator-max-microvolt = <3700000>;
 126         };
 127
 128         /*
 129          * Apparently RPMh does not provide support for PM8998 S4 because it
 130          * is always-on; model it as a fixed regulator.
 131          */
 132         vreg_s4a_1p8: pm8998-smps4 {
 133                 compatible = "regulator-fixed";
 134                 regulator-name = "vreg_s4a_1p8";
 135
 136                 regulator-min-microvolt = <1800000>;
 137                 regulator-max-microvolt = <1800000>;
 138
 139                 regulator-always-on;
 140                 regulator-boot-on;
 141
 142                 vin-supply = <&vph_pwr>;
 143         };
 144
 145         /*
 146          * The touchscreen regulator seems to be controlled somehow by a gpio.
 147          * Model it as a fixed regulator and keep it on. Without schematics we
 148          * don't know how this is actually wired up...
 149          */
 150         ts_1p8_supply: ts-1p8-regulator {
 151                 compatible = "regulator-fixed";
 152                 regulator-name = "ts_1p8_supply";
 153
 154                 regulator-min-microvolt = <1800000>;
 155                 regulator-max-microvolt = <1800000>;
 156
 157                 gpio = <&tlmm 88 0>;
 158                 enable-active-high;
 159                 regulator-boot-on;
 160         };
 161 };
 162
 163 &adsp_pas {
 164         status = "okay";
 165         firmware-name = "qcom/sdm845/oneplus6/adsp.mbn";
 166 };
 167
 168 &apps_rsc {
 169         regulators-0 {
 170                 compatible = "qcom,pm8998-rpmh-regulators";
 171                 qcom,pmic-id = "a";
 172
 173                 vdd-s1-supply = <&vph_pwr>;
 174                 vdd-s2-supply = <&vph_pwr>;
 175                 vdd-s3-supply = <&vph_pwr>;
 176                 vdd-s4-supply = <&vph_pwr>;
 177                 vdd-s5-supply = <&vph_pwr>;
 178                 vdd-s6-supply = <&vph_pwr>;
 179                 vdd-s7-supply = <&vph_pwr>;
 180                 vdd-s8-supply = <&vph_pwr>;
 181                 vdd-s9-supply = <&vph_pwr>;
 182                 vdd-s10-supply = <&vph_pwr>;
 183                 vdd-s11-supply = <&vph_pwr>;
 184                 vdd-s12-supply = <&vph_pwr>;
 185                 vdd-s13-supply = <&vph_pwr>;
 186                 vdd-l1-l27-supply = <&vreg_s7a_1p025>;
 187                 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
 188                 vdd-l3-l11-supply = <&vreg_s7a_1p025>;
 189                 vdd-l4-l5-supply = <&vreg_s7a_1p025>;
 190                 vdd-l6-supply = <&vph_pwr>;
 191                 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
 192                 vdd-l9-supply = <&vreg_bob>;
 193                 vdd-l10-l23-l25-supply = <&vreg_bob>;
 194                 vdd-l13-l19-l21-supply = <&vreg_bob>;
 195                 vdd-l16-l28-supply = <&vreg_bob>;
 196                 vdd-l18-l22-supply = <&vreg_bob>;
 197                 vdd-l20-l24-supply = <&vreg_bob>;
 198                 vdd-l26-supply = <&vreg_s3a_1p35>;
 199                 vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
 200
 201                 vreg_s3a_1p35: smps3 {
 202                         regulator-min-microvolt = <1352000>;
 203                         regulator-max-microvolt = <1352000>;
 204                 };
 205
 206                 vreg_s5a_2p04: smps5 {
 207                         regulator-min-microvolt = <1904000>;
 208                         regulator-max-microvolt = <2040000>;
 209                 };
 210
 211                 vreg_s7a_1p025: smps7 {
 212                         regulator-min-microvolt = <900000>;
 213                         regulator-max-microvolt = <1028000>;
 214                 };
 215
 216                 vdda_mipi_dsi0_pll:
 217                 vdda_qlink_lv:
 218                 vdda_ufs1_core:
 219                 vdda_usb1_ss_core:
 220                 vreg_l1a_0p875: ldo1 {
 221                         regulator-min-microvolt = <880000>;
 222                         regulator-max-microvolt = <880000>;
 223                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 224                 };
 225
 226                 vreg_l2a_1p2: ldo2 {
 227                         regulator-min-microvolt = <1200000>;
 228                         regulator-max-microvolt = <1200000>;
 229                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 230                         regulator-always-on;
 231                 };
 232
 233                 vreg_l5a_0p8: ldo5 {
 234                         regulator-min-microvolt = <800000>;
 235                         regulator-max-microvolt = <800000>;
 236                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 237                 };
 238
 239                 vreg_l7a_1p8: ldo7 {
 240                         regulator-min-microvolt = <1800000>;
 241                         regulator-max-microvolt = <1800000>;
 242                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 243                 };
 244
 245                 vdda_qusb_hs0_1p8:
 246                 vreg_l12a_1p8: ldo12 {
 247                         regulator-min-microvolt = <1800000>;
 248                         regulator-max-microvolt = <1800000>;
 249                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 250                 };
 251
 252                 vreg_l14a_1p88: ldo14 {
 253                         regulator-min-microvolt = <1800000>;
 254                         regulator-max-microvolt = <1800000>;
 255                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 256                         regulator-always-on;
 257                 };
 258
 259                 vreg_l17a_1p3: ldo17 {
 260                         regulator-min-microvolt = <1304000>;
 261                         regulator-max-microvolt = <1304000>;
 262                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 263                 };
 264
 265                 vreg_l20a_2p95: ldo20 {
 266                         regulator-min-microvolt = <2704000>;
 267                         regulator-max-microvolt = <2960000>;
 268                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 269                 };
 270
 271                 vreg_l23a_3p3: ldo23 {
 272                         regulator-min-microvolt = <3300000>;
 273                         regulator-max-microvolt = <3312000>;
 274                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 275                 };
 276
 277                 vdda_qusb_hs0_3p1:
 278                 vreg_l24a_3p075: ldo24 {
 279                         regulator-min-microvolt = <3088000>;
 280                         regulator-max-microvolt = <3088000>;
 281                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 282                 };
 283
 284                 vreg_l25a_3p3: ldo25 {
 285                         regulator-min-microvolt = <3300000>;
 286                         regulator-max-microvolt = <3312000>;
 287                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 288                 };
 289
 290                 vdda_mipi_dsi0_1p2:
 291                 vdda_ufs1_1p2:
 292                 vreg_l26a_1p2: ldo26 {
 293                         regulator-min-microvolt = <1200000>;
 294                         regulator-max-microvolt = <1200000>;
 295                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 296                 };
 297
 298                 vreg_l28a_3p0: ldo28 {
 299                         regulator-min-microvolt = <2856000>;
 300                         regulator-max-microvolt = <3008000>;
 301                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 302                 };
 303         };
 304
 305         regulators-1 {
 306                 compatible = "qcom,pmi8998-rpmh-regulators";
 307                 qcom,pmic-id = "b";
 308
 309                 vdd-bob-supply = <&vph_pwr>;
 310
 311                 vreg_bob: bob {
 312                         regulator-min-microvolt = <3312000>;
 313                         regulator-max-microvolt = <3600000>;
 314                         regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 315                         regulator-allow-bypass;
 316                 };
 317         };
 318
 319         regulators-2 {
 320                 compatible = "qcom,pm8005-rpmh-regulators";
 321                 qcom,pmic-id = "c";
 322
 323                 vdd-s1-supply = <&vph_pwr>;
 324                 vdd-s2-supply = <&vph_pwr>;
 325                 vdd-s3-supply = <&vph_pwr>;
 326                 vdd-s4-supply = <&vph_pwr>;
 327
 328                 vreg_s3c_0p6: smps3 {
 329                         regulator-min-microvolt = <600000>;
 330                         regulator-max-microvolt = <600000>;
 331                 };
 332         };
 333 };
 334
 335 &cdsp_pas {
 336         status = "okay";
 337         firmware-name = "qcom/sdm845/oneplus6/cdsp.mbn";
 338 };
 339
 340 &gcc {
 341         protected-clocks = <GCC_QSPI_CORE_CLK>,
 342                                 <GCC_QSPI_CORE_CLK_SRC>,
 343                                 <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
 344                                 <GCC_LPASS_Q6_AXI_CLK>,
 345                                 <GCC_LPASS_SWAY_CLK>;
 346 };
 347
 348 &gmu {
 349         status = "okay";
 350 };
 351
 352 &gpu {
 353         status = "okay";
 354
 355         zap-shader {
 356                 memory-region = <&gpu_mem>;
 357                 firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn";
 358         };
 359 };
 360
 361 &i2c10 {
 362         status = "okay";
 363         clock-frequency = <100000>;
 364
 365         bq27441_fg: bq27441-battery@55 {
 366                 compatible = "ti,bq27411";
 367                 status = "okay";
 368                 reg = <0x55>;
 369         };
 370 };
 371
 372 &i2c12 {
 373         status = "okay";
 374         clock-frequency = <400000>;
 375
 376         synaptics-rmi4-i2c@20 {
 377                 compatible = "syna,rmi4-i2c";
 378                 reg = <0x20>;
 379                 #address-cells = <1>;
 380                 #size-cells = <0>;
 381                 interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
 382
 383                 pinctrl-names = "default";
 384                 pinctrl-0 = <&ts_default_pins>;
 385
 386                 vdd-supply = <&vreg_l28a_3p0>;
 387                 vio-supply = <&ts_1p8_supply>;
 388
 389                 syna,reset-delay-ms = <200>;
 390                 syna,startup-delay-ms = <200>;
 391
 392                 rmi4-f01@1 {
 393                         reg = <0x01>;
 394                         syna,nosleep-mode = <1>;
 395                 };
 396
 397                 rmi4_f12: rmi4-f12@12 {
 398                         reg = <0x12>;
 399                         touchscreen-x-mm = <68>;
 400                         touchscreen-y-mm = <144>;
 401                         syna,sensor-type = <1>;
 402                         syna,rezero-wait-ms = <200>;
 403                 };
 404         };
 405 };
 406
 407 &ipa {
 408         qcom,gsi-loader = "self";
 409         memory-region = <&ipa_fw_mem>;
 410         firmware-name = "qcom/sdm845/oneplus6/ipa_fws.mbn";
 411         status = "okay";
 412 };
 413
 414 &mdss {
 415         status = "okay";
 416 };
 417
 418 &mdss_dsi0 {
 419         status = "okay";
 420         vdda-supply = <&vdda_mipi_dsi0_1p2>;
 421
 422         /*
 423          * Both devices use different panels but all other properties
 424          * are common. Compatible line is declared in device dts.
 425          */
 426         display_panel: panel@0 {
 427                 status = "disabled";
 428
 429                 reg = <0>;
 430
 431                 vddio-supply = <&vreg_l14a_1p88>;
 432
 433                 reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
 434
 435                 pinctrl-names = "default";
 436                 pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>;
 437
 438                 port {
 439                         panel_in: endpoint {
 440                                 remote-endpoint = <&mdss_dsi0_out>;
 441                         };
 442                 };
 443         };
 444 };
 445
 446 &mdss_dsi0_out {
 447         remote-endpoint = <&panel_in>;
 448         data-lanes = <0 1 2 3>;
 449 };
 450
 451 &mdss_dsi0_phy {
 452         status = "okay";
 453         vdds-supply = <&vdda_mipi_dsi0_pll>;
 454 };
 455
 456 /* Modem/wifi */
 457 &mss_pil {
 458         status = "okay";
 459         firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn";
 460 };
 461
 462 &pm8998_gpios {
 463         volume_down_gpio: pm8998-gpio5-state {
 464                 pinconf {
 465                         pins = "gpio5";
 466                         function = "normal";
 467                         input-enable;
 468                         bias-pull-up;
 469                         qcom,drive-strength = <0>;
 470                 };
 471         };
 472
 473         volume_up_gpio: pm8998-gpio6-state {
 474                 pinconf {
 475                         pins = "gpio6";
 476                         function = "normal";
 477                         input-enable;
 478                         bias-pull-up;
 479                         qcom,drive-strength = <0>;
 480                 };
 481         };
 482 };
 483
 484 &pmi8998_charger {
 485         status = "okay";
 486 };
 487
 488 &pmi8998_flash {
 489         status = "okay";
 490
 491         led-0 {
 492                 function = LED_FUNCTION_FLASH;
 493                 color = <LED_COLOR_ID_WHITE>;
 494                 led-sources = <1>;
 495                 led-max-microamp = <500000>;
 496                 flash-max-microamp = <1500000>;
 497                 flash-max-timeout-us = <1280000>;
 498         };
 499
 500         led-1 {
 501                 function = LED_FUNCTION_FLASH;
 502                 color = <LED_COLOR_ID_YELLOW>;
 503                 led-sources = <2>;
 504                 led-max-microamp = <500000>;
 505                 flash-max-microamp = <1500000>;
 506                 flash-max-timeout-us = <1280000>;
 507         };
 508 };
 509
 510 &q6afedai {
 511         dai@22 {
 512                 reg = <QUATERNARY_MI2S_RX>;
 513                 qcom,sd-lines = <1>;
 514         };
 515
 516         dai@23 {
 517                 reg = <QUATERNARY_MI2S_TX>;
 518                 qcom,sd-lines = <0>;
 519         };
 520 };
 521
 522 &q6asmdai {
 523         dai@0 {
 524                 reg = <0>;
 525         };
 526
 527         dai@1 {
 528                 reg = <1>;
 529         };
 530
 531         dai@2 {
 532                 reg = <2>;
 533         };
 534
 535         dai@3 {
 536                 reg = <3>;
 537         };
 538
 539         dai@4 {
 540                 reg = <4>;
 541         };
 542
 543         dai@5 {
 544                 reg = <5>;
 545         };
 546 };
 547
 548 &qupv3_id_1 {
 549         status = "okay";
 550 };
 551
 552 &qupv3_id_0 {
 553         status = "okay";
 554 };
 555
 556 &qup_i2c10_default {
 557         drive-strength = <2>;
 558         bias-disable;
 559 };
 560
 561 &qup_i2c12_default {
 562         drive-strength = <2>;
 563         bias-disable;
 564 };
 565
 566 &qup_uart9_rx {
 567         drive-strength = <2>;
 568         bias-pull-up;
 569 };
 570
 571 &qup_uart9_tx {
 572         drive-strength = <2>;
 573         bias-disable;
 574 };
 575
 576 &slpi_pas {
 577         firmware-name = "qcom/sdm845/oneplus6/slpi.mbn";
 578         status = "okay";
 579 };
 580
 581 &sound {
 582         compatible = "qcom,sdm845-sndcard";
 583         pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active>;
 584         pinctrl-names = "default";
 585         status = "okay";
 586
 587         mm1-dai-link {
 588                 link-name = "MultiMedia1";
 589                 cpu {
 590                         sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
 591                 };
 592         };
 593
 594         mm2-dai-link {
 595                 link-name = "MultiMedia2";
 596                 cpu {
 597                         sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
 598                 };
 599         };
 600
 601         mm3-dai-link {
 602                 link-name = "MultiMedia3";
 603                 cpu {
 604                         sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
 605                 };
 606         };
 607
 608         mm4-dai-link {
 609                 link-name = "MultiMedia4";
 610                 cpu {
 611                         sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
 612                 };
 613         };
 614
 615         mm5-dai-link {
 616                 link-name = "MultiMedia5";
 617                 cpu {
 618                         sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>;
 619                 };
 620         };
 621
 622         mm6-dai-link {
 623                 link-name = "MultiMedia6";
 624                 cpu {
 625                         sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>;
 626                 };
 627         };
 628
 629         speaker_playback_dai: speaker-dai-link {
 630                 link-name = "Speaker Playback";
 631                 cpu {
 632                         sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
 633                 };
 634
 635                 platform {
 636                         sound-dai = <&q6routing>;
 637                 };
 638         };
 639
 640         slim-dai-link {
 641                 link-name = "SLIM Playback 1";
 642                 cpu {
 643                         sound-dai = <&q6afedai SLIMBUS_0_RX>;
 644                 };
 645
 646                 platform {
 647                         sound-dai = <&q6routing>;
 648                 };
 649
 650                 codec {
 651                         sound-dai = <&wcd9340 0>;
 652                 };
 653         };
 654
 655         slimcap-dai-link {
 656                 link-name = "SLIM Capture 1";
 657                 cpu {
 658                         sound-dai = <&q6afedai SLIMBUS_0_TX>;
 659                 };
 660
 661                 platform {
 662                         sound-dai = <&q6routing>;
 663                 };
 664
 665                 codec {
 666                         sound-dai = <&wcd9340 1>;
 667                 };
 668         };
 669
 670         slim2-dai-link {
 671                 link-name = "SLIM Playback 2";
 672                 cpu {
 673                         sound-dai = <&q6afedai SLIMBUS_1_RX>;
 674                 };
 675
 676                 platform {
 677                         sound-dai = <&q6routing>;
 678                 };
 679
 680                 codec {
 681                         sound-dai = <&wcd9340 2>; /* AIF2_PB */
 682                 };
 683         };
 684
 685         slimcap2-dai-link {
 686                 link-name = "SLIM Capture 2";
 687                 cpu {
 688                         sound-dai = <&q6afedai SLIMBUS_1_TX>;
 689                 };
 690
 691                 platform {
 692                         sound-dai = <&q6routing>;
 693                 };
 694
 695                 codec {
 696                         sound-dai = <&wcd9340 3>; /* AIF2_CAP */
 697                 };
 698         };
 699
 700         slimcap3-dai-link {
 701                 link-name = "SLIM Capture 3";
 702                 cpu {
 703                         sound-dai = <&q6afedai SLIMBUS_2_TX>;
 704                 };
 705
 706                 platform {
 707                         sound-dai = <&q6routing>;
 708                 };
 709
 710                 codec {
 711                         sound-dai = <&wcd9340 5>; /* AIF3_CAP */
 712                 };
 713         };
 714 };
 715
 716 &uart6 {
 717         status = "okay";
 718
 719         pinctrl-0 = <&qup_uart6_4pin>;
 720
 721         bluetooth {
 722                 compatible = "qcom,wcn3990-bt";
 723
 724                 /*
 725                  * This path is relative to the qca/
 726                  * subdir under lib/firmware.
 727                  */
 728                 firmware-name = "oneplus6/crnv21.bin";
 729
 730                 vddio-supply = <&vreg_s4a_1p8>;
 731                 vddxo-supply = <&vreg_l7a_1p8>;
 732                 vddrf-supply = <&vreg_l17a_1p3>;
 733                 vddch0-supply = <&vreg_l25a_3p3>;
 734                 max-speed = <3200000>;
 735         };
 736 };
 737
 738 &uart9 {
 739         label = "LS-UART1";
 740         status = "okay";
 741 };
 742
 743 &ufs_mem_hc {
 744         status = "okay";
 745
 746         reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
 747
 748         vcc-supply = <&vreg_l20a_2p95>;
 749         vcc-max-microamp = <600000>;
 750 };
 751
 752 &ufs_mem_phy {
 753         status = "okay";
 754
 755         vdda-phy-supply = <&vdda_ufs1_core>;
 756         vdda-pll-supply = <&vdda_ufs1_1p2>;
 757 };
 758
 759 &usb_1 {
 760         status = "okay";
 761
 762         /*
 763          * disable USB3 clock requirement as the device only supports
 764          * USB2.
 765          */
 766         qcom,select-utmi-as-pipe-clk;
 767 };
 768
 769 &usb_1_dwc3 {
 770         /*
 771          * We don't have the capability to switch modes yet.
 772          */
 773         dr_mode = "peripheral";
 774
 775         /* fastest mode for USB 2 */
 776         maximum-speed = "high-speed";
 777
 778         /* Remove USB3 phy as it's unused on this device. */
 779         phys = <&usb_1_hsphy>;
 780         phy-names = "usb2-phy";
 781 };
 782
 783 &usb_1_hsphy {
 784         status = "okay";
 785
 786         vdd-supply = <&vdda_usb1_ss_core>;
 787         vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
 788         vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
 789
 790         qcom,imp-res-offset-value = <8>;
 791         qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
 792         qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
 793         qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
 794 };
 795
 796 &tlmm {
 797         gpio-reserved-ranges = <0 4>, <81 4>;
 798
 799         hall_sensor_default: hall-sensor-default-state {
 800                 pins = "gpio124";
 801                 function = "gpio";
 802                 drive-strength = <2>;
 803                 bias-disable;
 804         };
 805
 806         tri_state_key_default: tri-state-key-default-state {
 807                 pins = "gpio40", "gpio42", "gpio26";
 808                 function = "gpio";
 809                 drive-strength = <2>;
 810                 bias-disable;
 811         };
 812
 813         ts_default_pins: ts-int-state {
 814                 pins = "gpio99", "gpio125";
 815                 function = "gpio";
 816                 drive-strength = <16>;
 817                 bias-pull-up;
 818         };
 819
 820         panel_reset_pins: panel-reset-state {
 821                 pins = "gpio6", "gpio25", "gpio26";
 822                 function = "gpio";
 823                 drive-strength = <8>;
 824                 bias-disable;
 825         };
 826
 827         panel_te_pin: panel-te-state {
 828                 pins = "gpio10";
 829                 function = "mdp_vsync";
 830                 drive-strength = <2>;
 831                 bias-disable;
 832         };
 833
 834         panel_esd_pin: panel-esd-state {
 835                 pins = "gpio30";
 836                 function = "gpio";
 837                 drive-strength = <2>;
 838                 bias-pull-down;
 839         };
 840
 841         speaker_default: speaker-default-state {
 842                 pins = "gpio69";
 843                 function = "gpio";
 844                 drive-strength = <16>;
 845                 bias-pull-up;
 846                 output-high;
 847         };
 848 };
 849
 850 &venus {
 851         status = "okay";
 852         firmware-name = "qcom/sdm845/oneplus6/venus.mbn";
 853 };
 854
 855 &wcd9340 {
 856         pinctrl-0 = <&wcd_intr_default>;
 857         pinctrl-names = "default";
 858         reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
 859         vdd-buck-supply = <&vreg_s4a_1p8>;
 860         vdd-buck-sido-supply = <&vreg_s4a_1p8>;
 861         vdd-tx-supply = <&vreg_s4a_1p8>;
 862         vdd-rx-supply = <&vreg_s4a_1p8>;
 863         vdd-io-supply = <&vreg_s4a_1p8>;
 864 };
 865
 866 &wifi {
 867         status = "okay";
 868         vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
 869         vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
 870         vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
 871         vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
 872         vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
 873
 874         qcom,snoc-host-cap-8bit-quirk;
 875 };