arch/arm64/boot/dts/qcom/sdm660.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (c) 2018, Craig Tatlor.
   4  * Copyright (c) 2020, Alexey Minnekhanov <alexey.min@gmail.com>
   5  * Copyright (c) 2020, AngeloGioacchino Del Regno <kholk11@gmail.com>
   6  * Copyright (c) 2020, Konrad Dybcio <konradybcio@gmail.com>
   7  * Copyright (c) 2020, Martin Botka <martin.botka1@gmail.com>
   8  */
   9
  10 #include "sdm630.dtsi"
  11
  12 &adreno_gpu {
  13         compatible = "qcom,adreno-512.0", "qcom,adreno";
  14         operating-points-v2 = <&gpu_sdm660_opp_table>;
  15
  16         gpu_sdm660_opp_table: opp-table {
  17                 compatible  = "operating-points-v2";
  18
  19                 /*
  20                  * 775MHz is only available on the highest speed bin
  21                  * Though it cannot be used for now due to interconnect
  22                  * framework not supporting multiple frequencies
  23                  * at the same opp-level
  24
  25                 opp-750000000 {
  26                         opp-hz = /bits/ 64 <750000000>;
  27                         opp-level = <RPM_SMD_LEVEL_TURBO>;
  28                         opp-peak-kBps = <5412000>;
  29                         opp-supported-hw = <0xCHECKME>;
  30                 };
  31
  32                 * These OPPs are correct, but we are lacking support for the
  33                 * GPU regulator. Hence, disable them for now to prevent the
  34                 * platform from hanging on high graphics loads.
  35
  36                 opp-700000000 {
  37                         opp-hz = /bits/ 64 <700000000>;
  38                         opp-level = <RPM_SMD_LEVEL_TURBO>;
  39                         opp-peak-kBps = <5184000>;
  40                         opp-supported-hw = <0xFF>;
  41                 };
  42
  43                 opp-647000000 {
  44                         opp-hz = /bits/ 64 <647000000>;
  45                         opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
  46                         opp-peak-kBps = <4068000>;
  47                         opp-supported-hw = <0xFF>;
  48                 };
  49
  50                 opp-588000000 {
  51                         opp-hz = /bits/ 64 <588000000>;
  52                         opp-level = <RPM_SMD_LEVEL_NOM>;
  53                         opp-peak-kBps = <3072000>;
  54                         opp-supported-hw = <0xFF>;
  55                 };
  56
  57                 opp-465000000 {
  58                         opp-hz = /bits/ 64 <465000000>;
  59                         opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
  60                         opp-peak-kBps = <2724000>;
  61                         opp-supported-hw = <0xFF>;
  62                 };
  63
  64                 opp-370000000 {
  65                         opp-hz = /bits/ 64 <370000000>;
  66                         opp-level = <RPM_SMD_LEVEL_SVS>;
  67                         opp-peak-kBps = <2188000>;
  68                         opp-supported-hw = <0xFF>;
  69                 };
  70                 */
  71
  72                 opp-266000000 {
  73                         opp-hz = /bits/ 64 <266000000>;
  74                         opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
  75                         opp-peak-kBps = <1648000>;
  76                         opp-supported-hw = <0xFF>;
  77                 };
  78
  79                 opp-160000000 {
  80                         opp-hz = /bits/ 64 <160000000>;
  81                         opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
  82                         opp-peak-kBps = <1200000>;
  83                         opp-supported-hw = <0xFF>;
  84                 };
  85         };
  86 };
  87
  88 &CPU0 {
  89         compatible = "qcom,kryo260";
  90         capacity-dmips-mhz = <1024>;
  91         /delete-property/ operating-points-v2;
  92 };
  93
  94 &CPU1 {
  95         compatible = "qcom,kryo260";
  96         capacity-dmips-mhz = <1024>;
  97         /delete-property/ operating-points-v2;
  98 };
  99
 100 &CPU2 {
 101         compatible = "qcom,kryo260";
 102         capacity-dmips-mhz = <1024>;
 103         /delete-property/ operating-points-v2;
 104 };
 105
 106 &CPU3 {
 107         compatible = "qcom,kryo260";
 108         capacity-dmips-mhz = <1024>;
 109         /delete-property/ operating-points-v2;
 110 };
 111
 112 &CPU4 {
 113         compatible = "qcom,kryo260";
 114         capacity-dmips-mhz = <640>;
 115         /delete-property/ operating-points-v2;
 116 };
 117
 118 &CPU5 {
 119         compatible = "qcom,kryo260";
 120         capacity-dmips-mhz = <640>;
 121         /delete-property/ operating-points-v2;
 122 };
 123
 124 &CPU6 {
 125         compatible = "qcom,kryo260";
 126         capacity-dmips-mhz = <640>;
 127         /delete-property/ operating-points-v2;
 128 };
 129
 130 &CPU7 {
 131         compatible = "qcom,kryo260";
 132         capacity-dmips-mhz = <640>;
 133         /delete-property/ operating-points-v2;
 134 };
 135
 136 &gcc {
 137         compatible = "qcom,gcc-sdm660";
 138 };
 139
 140 &gpucc {
 141         compatible = "qcom,gpucc-sdm660";
 142 };
 143
 144 &mdp {
 145         ports {
 146                 port@1 {
 147                         reg = <1>;
 148                         mdp5_intf2_out: endpoint {
 149                                 remote-endpoint = <&dsi1_in>;
 150                         };
 151                 };
 152         };
 153 };
 154
 155 &mdss {
 156         dsi1: dsi@c996000 {
 157                 compatible = "qcom,mdss-dsi-ctrl";
 158                 reg = <0x0c996000 0x400>;
 159                 reg-names = "dsi_ctrl";
 160
 161                 /* DSI1 shares the OPP table with DSI0 */
 162                 operating-points-v2 = <&dsi_opp_table>;
 163                 power-domains = <&rpmpd SDM660_VDDCX>;
 164
 165                 interrupt-parent = <&mdss>;
 166                 interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 167
 168                 assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
 169                                         <&mmcc PCLK1_CLK_SRC>;
 170                 assigned-clock-parents = <&dsi1_phy 0>,
 171                                                 <&dsi1_phy 1>;
 172
 173                 clocks = <&mmcc MDSS_MDP_CLK>,
 174                                 <&mmcc MDSS_BYTE1_CLK>,
 175                                 <&mmcc MDSS_BYTE1_INTF_CLK>,
 176                                 <&mmcc MNOC_AHB_CLK>,
 177                                 <&mmcc MDSS_AHB_CLK>,
 178                                 <&mmcc MDSS_AXI_CLK>,
 179                                 <&mmcc MISC_AHB_CLK>,
 180                                 <&mmcc MDSS_PCLK1_CLK>,
 181                                 <&mmcc MDSS_ESC1_CLK>;
 182                 clock-names = "mdp_core",
 183                                         "byte",
 184                                         "byte_intf",
 185                                         "mnoc",
 186                                         "iface",
 187                                         "bus",
 188                                         "core_mmss",
 189                                         "pixel",
 190                                         "core";
 191
 192                 phys = <&dsi1_phy>;
 193                 phy-names = "dsi";
 194
 195                 ports {
 196                         #address-cells = <1>;
 197                         #size-cells = <0>;
 198
 199                         port@0 {
 200                                 reg = <0>;
 201                                 dsi1_in: endpoint {
 202                                         remote-endpoint = <&mdp5_intf2_out>;
 203                                 };
 204                         };
 205
 206                         port@1 {
 207                                 reg = <1>;
 208                                 dsi1_out: endpoint {
 209                                 };
 210                         };
 211                 };
 212         };
 213
 214         dsi1_phy: dsi-phy@c996400 {
 215                 compatible = "qcom,dsi-phy-14nm-660";
 216                 reg = <0x0c996400 0x100>,
 217                                 <0x0c996500 0x300>,
 218                                 <0x0c996800 0x188>;
 219                 reg-names = "dsi_phy",
 220                                 "dsi_phy_lane",
 221                                 "dsi_pll";
 222
 223                 #clock-cells = <1>;
 224                 #phy-cells = <0>;
 225
 226                 clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
 227                 clock-names = "iface", "ref";
 228         };
 229 };
 230
 231 &mmcc {
 232         compatible = "qcom,mmcc-sdm660";
 233         clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 234                         <&sleep_clk>,
 235                         <&gcc GCC_MMSS_GPLL0_CLK>,
 236                         <&gcc GCC_MMSS_GPLL0_DIV_CLK>,
 237                         <&dsi0_phy 1>,
 238                         <&dsi0_phy 0>,
 239                         <&dsi1_phy 1>,
 240                         <&dsi1_phy 0>,
 241                         <0>,
 242                         <0>;
 243 };
 244
 245 &tlmm {
 246         compatible = "qcom,sdm660-pinctrl";
 247 };
 248
 249 &tsens {
 250         #qcom,sensors = <14>;
 251 };