arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Google Pompom board device tree source
   4  *
   5  * Copyright 2020 Google LLC.
   6  */
   7
   8 #include "sc7180.dtsi"
   9
  10 ap_ec_spi: &spi6 {};
  11 ap_h1_spi: &spi0 {};
  12
  13 #include "sc7180-trogdor.dtsi"
  14
  15 / {
  16         thermal-zones {
  17                 5v-choke-thermal {
  18                         polling-delay-passive = <0>;
  19                         polling-delay = <250>;
  20
  21                         thermal-sensors = <&pm6150_adc_tm 1>;
  22
  23                         trips {
  24                                 5v-choke-crit {
  25                                         temperature = <125000>;
  26                                         hysteresis = <1000>;
  27                                         type = "critical";
  28                                 };
  29                         };
  30                 };
  31         };
  32 };
  33
  34 &alc5682 {
  35         realtek,dmic-clk-driving-high = "true";
  36 };
  37
  38 &cpu6_alert0 {
  39         temperature = <60000>;
  40 };
  41
  42 &cpu6_alert1 {
  43         temperature = <65000>;
  44 };
  45
  46 &cpu6_thermal {
  47         sustainable-power = <948>;
  48 };
  49
  50 &cpu7_alert0 {
  51         temperature = <60000>;
  52 };
  53
  54 &cpu7_alert1 {
  55         temperature = <65000>;
  56 };
  57
  58 &cpu7_thermal {
  59         sustainable-power = <948>;
  60 };
  61
  62 &cpu8_alert0 {
  63         temperature = <60000>;
  64 };
  65
  66 &cpu8_alert1 {
  67         temperature = <65000>;
  68 };
  69
  70 &cpu8_thermal {
  71         sustainable-power = <948>;
  72 };
  73
  74 &cpu9_alert0 {
  75         temperature = <60000>;
  76 };
  77
  78 &cpu9_alert1 {
  79         temperature = <65000>;
  80 };
  81
  82 &cpu9_thermal {
  83         sustainable-power = <948>;
  84 };
  85
  86 &gpio_keys {
  87         status = "okay";
  88 };
  89
  90 ap_ts_pen_1v8: &i2c4 {
  91         status = "okay";
  92         clock-frequency = <400000>;
  93
  94         ap_ts: touchscreen@10 {
  95                 compatible = "hid-over-i2c";
  96                 reg = <0x10>;
  97                 pinctrl-names = "default";
  98                 pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
  99
 100                 interrupt-parent = <&tlmm>;
 101                 interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
 102
 103                 post-power-on-delay-ms = <20>;
 104                 hid-descr-addr = <0x0001>;
 105
 106                 vdd-supply = <&pp3300_ts>;
 107         };
 108 };
 109
 110 &keyboard_controller {
 111         function-row-physmap = <
 112                 MATRIX_KEY(0x00, 0x02, 0)       /* T1 */
 113                 MATRIX_KEY(0x03, 0x02, 0)       /* T2 */
 114                 MATRIX_KEY(0x02, 0x02, 0)       /* T3 */
 115                 MATRIX_KEY(0x01, 0x02, 0)       /* T4 */
 116                 MATRIX_KEY(0x03, 0x04, 0)       /* T5 */
 117                 MATRIX_KEY(0x02, 0x04, 0)       /* T6 */
 118                 MATRIX_KEY(0x01, 0x04, 0)       /* T7 */
 119                 MATRIX_KEY(0x02, 0x09, 0)       /* T8 */
 120                 MATRIX_KEY(0x01, 0x09, 0)       /* T9 */
 121                 MATRIX_KEY(0x00, 0x04, 0)       /* T10 */
 122         >;
 123         linux,keymap = <
 124                 MATRIX_KEY(0x00, 0x02, KEY_BACK)
 125                 MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
 126                 MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
 127                 MATRIX_KEY(0x01, 0x02, KEY_SCALE)
 128                 MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
 129                 MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
 130                 MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
 131                 MATRIX_KEY(0x02, 0x09, KEY_MUTE)
 132                 MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
 133                 MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
 134
 135                 CROS_STD_MAIN_KEYMAP
 136         >;
 137 };
 138
 139 &panel {
 140         compatible = "kingdisplay,kd116n21-30nv-a010";
 141 };
 142
 143 &pen_insert {
 144         /* Insert = high, eject = low */
 145         gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
 146 };
 147
 148 &pm6150_adc {
 149         5v-choke-thermistor@4e {
 150                 reg = <ADC5_AMUX_THM2_100K_PU>;
 151                 qcom,ratiometric;
 152                 qcom,hw-settle-time = <200>;
 153         };
 154 };
 155
 156 &pm6150_adc_tm {
 157         status = "okay";
 158
 159         5v-choke-thermistor@1 {
 160                 reg = <1>;
 161                 io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>;
 162                 qcom,ratiometric;
 163                 qcom,hw-settle-time-us = <200>;
 164         };
 165 };
 166
 167 &sdhc_2 {
 168         status = "okay";
 169 };
 170
 171 &sound {
 172         model = "sc7180-rt5682-max98357a-2mic";
 173         pinctrl-names = "default";
 174         pinctrl-0 = <&dmic_sel>;
 175         dmic-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
 176 };
 177
 178 &usb_c1 {
 179         status = "disabled";
 180 };
 181
 182 &wifi {
 183         qcom,ath10k-calibration-variant = "GO_POMPOM";
 184 };
 185
 186 /* PINCTRL - board-specific pinctrl */
 187
 188 &tlmm {
 189         gpio-line-names = "TP_INT_ODL",
 190                           "AP_RAM_ID0",
 191                           "AP_SKU_ID2",
 192                           "AP_RAM_ID1",
 193                           "",
 194                           "AP_RAM_ID2",
 195                           "AP_TP_I2C_SDA",
 196                           "AP_TP_I2C_SCL",
 197                           "TS_RESET_L",
 198                           "TS_INT_L",
 199                           "",
 200                           "EDP_BRIJ_IRQ",
 201                           "AP_EDP_BKLTEN",
 202                           "",
 203                           "",
 204                           "EDP_BRIJ_I2C_SDA",
 205                           "EDP_BRIJ_I2C_SCL",
 206                           "HUB_RST_L",
 207                           "",
 208                           "",
 209                           "",
 210                           "",
 211                           "",
 212                           "AMP_EN",
 213                           "P_SENSOR_INT_L",
 214                           "AP_SAR_SENSOR_SDA",
 215                           "AP_SAR_SENSOR_SCL",
 216                           "",
 217                           "HP_IRQ",
 218                           "",
 219                           "EN_PP3300_DX_EDP",
 220                           "AP_BRD_ID2",
 221                           "BRIJ_SUSPEND",
 222                           "AP_BRD_ID0",
 223                           "AP_H1_SPI_MISO",
 224                           "AP_H1_SPI_MOSI",
 225                           "AP_H1_SPI_CLK",
 226                           "AP_H1_SPI_CS_L",
 227                           "",
 228                           "",
 229                           "",
 230                           "",
 231                           "H1_AP_INT_ODL",
 232                           "",
 233                           "UART_AP_TX_DBG_RX",
 234                           "UART_DBG_TX_AP_RX",
 235                           "HP_I2C_SDA",
 236                           "HP_I2C_SCL",
 237                           "FORCED_USB_BOOT",
 238                           "AMP_BCLK",
 239                           "AMP_LRCLK",
 240                           "AMP_DIN",
 241                           "PEN_PDCT_L",
 242                           "HP_BCLK",
 243                           "HP_LRCLK",
 244                           "HP_DOUT",
 245                           "HP_DIN",
 246                           "HP_MCLK",
 247                           "AP_SKU_ID0",
 248                           "AP_EC_SPI_MISO",
 249                           "AP_EC_SPI_MOSI",
 250                           "AP_EC_SPI_CLK",
 251                           "AP_EC_SPI_CS_L",
 252                           "AP_SPI_CLK",
 253                           "AP_SPI_MOSI",
 254                           "AP_SPI_MISO",
 255                           /*
 256                            * AP_FLASH_WP_L is crossystem ABI. Schematics
 257                            * call it BIOS_FLASH_WP_L.
 258                            */
 259                           "AP_FLASH_WP_L",
 260                           "",
 261                           "AP_SPI_CS0_L",
 262                           "SD_CD_ODL",
 263                           "",
 264                           "",
 265                           "",
 266                           "",
 267                           "",
 268                           "UIM2_DATA",
 269                           "UIM2_CLK",
 270                           "UIM2_RST",
 271                           "UIM2_PRESENT",
 272                           "UIM1_DATA",
 273                           "UIM1_CLK",
 274                           "UIM1_RST",
 275                           "",
 276                           "EN_PP3300_CODEC",
 277                           "EN_PP3300_HUB",
 278                           "",
 279                           "DMIC_SEL",
 280                           "",
 281                           "",
 282                           "",
 283                           "AP_SKU_ID1",
 284                           "AP_RST_REQ",
 285                           "",
 286                           "AP_BRD_ID1",
 287                           "AP_EC_INT_R_L",
 288                           "",
 289                           "",
 290                           "",
 291                           "",
 292                           "",
 293                           "",
 294                           "",
 295                           "",
 296                           "",
 297                           "EDP_BRIJ_EN",
 298                           "",
 299                           "",
 300                           "",
 301                           "",
 302                           "",
 303                           "",
 304                           "",
 305                           "",
 306                           "",
 307                           "",
 308                           "AP_TS_PEN_I2C_SDA",
 309                           "AP_TS_PEN_I2C_SCL",
 310                           "DP_HOT_PLUG_DET",
 311                           "EC_IN_RW_ODL";
 312
 313         dmic_sel: dmic-sel {
 314                 pinmux {
 315                         pins = "gpio86";
 316                         function = "gpio";
 317                 };
 318
 319                 pinconf {
 320                         pins = "gpio86";
 321                         bias-pull-down;
 322                 };
 323         };
 324 };