arch/arm64/boot/dts/qcom/qrb5165-rb5.dts

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2020, Linaro Ltd.
   4  */
   5
   6 /dts-v1/;
   7
   8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
   9 #include <dt-bindings/sound/qcom,q6afe.h>
  10 #include <dt-bindings/sound/qcom,q6asm.h>
  11 #include "sm8250.dtsi"
  12 #include "pm8150.dtsi"
  13 #include "pm8150b.dtsi"
  14 #include "pm8150l.dtsi"
  15
  16 / {
  17         model = "Qualcomm Technologies, Inc. Robotics RB5";
  18         compatible = "qcom,qrb5165-rb5", "qcom,sm8250";
  19
  20         aliases {
  21                 serial0 = &uart12;
  22                 sdhc2 = &sdhc_2;
  23         };
  24
  25         chosen {
  26                 stdout-path = "serial0:115200n8";
  27         };
  28
  29         /* Fixed crystal oscillator dedicated to MCP2518FD */
  30         clk40M: can_clock {
  31                 compatible = "fixed-clock";
  32                 #clock-cells = <0>;
  33                 clock-frequency = <40000000>;
  34         };
  35
  36         dc12v: dc12v-regulator {
  37                 compatible = "regulator-fixed";
  38                 regulator-name = "DC12V";
  39                 regulator-min-microvolt = <12000000>;
  40                 regulator-max-microvolt = <12000000>;
  41                 regulator-always-on;
  42         };
  43
  44         hdmi-out {
  45                 compatible = "hdmi-connector";
  46                 type = "a";
  47
  48                 port {
  49                         hdmi_con: endpoint {
  50                                 remote-endpoint = <&lt9611_out>;
  51                         };
  52                 };
  53         };
  54
  55         leds {
  56                 compatible = "gpio-leds";
  57
  58                 user4 {
  59                         label = "green:user4";
  60                         gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
  61                         linux,default-trigger = "panic-indicator";
  62                         default-state = "off";
  63                 };
  64
  65                 wlan {
  66                         label = "yellow:wlan";
  67                         gpios = <&pm8150_gpios 9 GPIO_ACTIVE_HIGH>;
  68                         linux,default-trigger = "phy0tx";
  69                         default-state = "off";
  70                 };
  71
  72                 bt {
  73                         label = "blue:bt";
  74                         gpios = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>;
  75                         linux,default-trigger = "bluetooth-power";
  76                         default-state = "off";
  77                 };
  78
  79         };
  80
  81         lt9611_1v2: lt9611-vdd12-regulator {
  82                 compatible = "regulator-fixed";
  83                 regulator-name = "LT9611_1V2";
  84
  85                 vin-supply = <&vdc_3v3>;
  86                 regulator-min-microvolt = <1200000>;
  87                 regulator-max-microvolt = <1200000>;
  88         };
  89
  90         lt9611_3v3: lt9611-3v3 {
  91                 compatible = "regulator-fixed";
  92                 regulator-name = "LT9611_3V3";
  93
  94                 vin-supply = <&vdc_3v3>;
  95                 regulator-min-microvolt = <3300000>;
  96                 regulator-max-microvolt = <3300000>;
  97                 regulator-boot-on;
  98                 regulator-always-on;
  99         };
 100
 101         thermal-zones {
 102                 conn-thermal {
 103                         polling-delay-passive = <0>;
 104                         polling-delay = <0>;
 105                         thermal-sensors = <&pm8150b_adc_tm 0>;
 106
 107                         trips {
 108                                 active-config0 {
 109                                         temperature = <125000>;
 110                                         hysteresis = <1000>;
 111                                         type = "critical";
 112                                 };
 113                         };
 114                 };
 115
 116                 pm8150l-thermal {
 117                         polling-delay-passive = <0>;
 118                         polling-delay = <0>;
 119                         thermal-sensors = <&pm8150l_adc_tm 1>;
 120
 121                         trips {
 122                                 active-config0 {
 123                                         temperature = <50000>;
 124                                         hysteresis = <4000>;
 125                                         type = "passive";
 126                                 };
 127                         };
 128                 };
 129
 130                 skin-msm-thermal {
 131                         polling-delay-passive = <0>;
 132                         polling-delay = <0>;
 133                         thermal-sensors = <&pm8150l_adc_tm 0>;
 134
 135                         trips {
 136                                 active-config0 {
 137                                         temperature = <50000>;
 138                                         hysteresis = <4000>;
 139                                         type = "passive";
 140                                 };
 141                         };
 142                 };
 143
 144                 wifi-thermal {
 145                         polling-delay-passive = <0>;
 146                         polling-delay = <0>;
 147                         thermal-sensors = <&pm8150_adc_tm 1>;
 148
 149                         trips {
 150                                 active-config0 {
 151                                         temperature = <52000>;
 152                                         hysteresis = <4000>;
 153                                         type = "passive";
 154                                 };
 155                         };
 156                 };
 157
 158                 xo-thermal {
 159                         polling-delay-passive = <0>;
 160                         polling-delay = <0>;
 161                         thermal-sensors = <&pm8150_adc_tm 0>;
 162
 163                         trips {
 164                                 active-config0 {
 165                                         temperature = <50000>;
 166                                         hysteresis = <4000>;
 167                                         type = "passive";
 168                                 };
 169                         };
 170                 };
 171         };
 172
 173         vbat: vbat-regulator {
 174                 compatible = "regulator-fixed";
 175                 regulator-name = "VBAT";
 176                 vin-supply = <&vreg_l11c_3p3>;
 177                 regulator-min-microvolt = <4200000>;
 178                 regulator-max-microvolt = <4200000>;
 179                 regulator-always-on;
 180         };
 181
 182         vbat_som: vbat-som-regulator {
 183                 compatible = "regulator-fixed";
 184                 regulator-name = "VBAT_SOM";
 185                 vin-supply = <&dc12v>;
 186                 regulator-min-microvolt = <4200000>;
 187                 regulator-max-microvolt = <4200000>;
 188                 regulator-always-on;
 189         };
 190
 191         vdc_3v3: vdc-3v3-regulator {
 192                 compatible = "regulator-fixed";
 193                 regulator-name = "VDC_3V3";
 194                 vin-supply = <&vreg_l11c_3p3>;
 195                 regulator-min-microvolt = <3300000>;
 196                 regulator-max-microvolt = <3300000>;
 197                 regulator-always-on;
 198         };
 199
 200         vdc_5v: vdc-5v-regulator {
 201                 compatible = "regulator-fixed";
 202                 regulator-name = "VDC_5V";
 203
 204                 regulator-min-microvolt = <5000000>;
 205                 regulator-max-microvolt = <5000000>;
 206                 regulator-always-on;
 207                 vin-supply = <&vreg_l11c_3p3>;
 208         };
 209
 210         vph_pwr: vph-pwr-regulator {
 211                 compatible = "regulator-fixed";
 212                 regulator-name = "vph_pwr";
 213                 regulator-min-microvolt = <3700000>;
 214                 regulator-max-microvolt = <3700000>;
 215                 regulator-always-on;
 216         };
 217
 218         vreg_s4a_1p8: vreg-s4a-1p8 {
 219                 compatible = "regulator-fixed";
 220                 regulator-name = "vreg_s4a_1p8";
 221                 regulator-min-microvolt = <1800000>;
 222                 regulator-max-microvolt = <1800000>;
 223                 regulator-always-on;
 224         };
 225 };
 226
 227 &adsp {
 228         status = "okay";
 229         firmware-name = "qcom/sm8250/adsp.mbn";
 230 };
 231
 232 &apps_rsc {
 233         pm8009-rpmh-regulators {
 234                 compatible = "qcom,pm8009-1-rpmh-regulators";
 235                 qcom,pmic-id = "f";
 236
 237                 vdd-s1-supply = <&vph_pwr>;
 238                 vdd-s2-supply = <&vph_pwr>;
 239                 vdd-l2-supply = <&vreg_s8c_1p3>;
 240                 vdd-l5-l6-supply = <&vreg_bob>;
 241                 vdd-l7-supply = <&vreg_s4a_1p8>;
 242
 243                 vreg_s2f_0p95: smps2 {
 244                         regulator-name = "vreg_s2f_0p95";
 245                         regulator-min-microvolt = <900000>;
 246                         regulator-max-microvolt = <952000>;
 247                         regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 248                 };
 249
 250                 vreg_l1f_1p1: ldo1 {
 251                         regulator-name = "vreg_l1f_1p1";
 252                         regulator-min-microvolt = <1104000>;
 253                         regulator-max-microvolt = <1104000>;
 254                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 255                 };
 256
 257                 vreg_l2f_1p2: ldo2 {
 258                         regulator-name = "vreg_l2f_1p2";
 259                         regulator-min-microvolt = <1200000>;
 260                         regulator-max-microvolt = <1200000>;
 261                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 262                 };
 263
 264                 vreg_l6f_2p8: ldo6 {
 265                         regulator-name = "vreg_l6f_2p8";
 266                         regulator-min-microvolt = <2800000>;
 267                         regulator-max-microvolt = <2800000>;
 268                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 269                 };
 270
 271                 vreg_l7f_1p8: ldo7 {
 272                         regulator-name = "vreg_l7f_1p8";
 273                         regulator-min-microvolt = <1800000>;
 274                         regulator-max-microvolt = <1800000>;
 275                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 276                 };
 277         };
 278
 279         pm8150-rpmh-regulators {
 280                 compatible = "qcom,pm8150-rpmh-regulators";
 281                 qcom,pmic-id = "a";
 282
 283                 vdd-s1-supply = <&vph_pwr>;
 284                 vdd-s2-supply = <&vph_pwr>;
 285                 vdd-s3-supply = <&vph_pwr>;
 286                 vdd-s4-supply = <&vph_pwr>;
 287                 vdd-s5-supply = <&vph_pwr>;
 288                 vdd-s6-supply = <&vph_pwr>;
 289                 vdd-s7-supply = <&vph_pwr>;
 290                 vdd-s8-supply = <&vph_pwr>;
 291                 vdd-s9-supply = <&vph_pwr>;
 292                 vdd-s10-supply = <&vph_pwr>;
 293                 vdd-l2-l10-supply = <&vreg_bob>;
 294                 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
 295                 vdd-l6-l9-supply = <&vreg_s8c_1p3>;
 296                 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
 297                 vdd-l13-l16-l17-supply = <&vreg_bob>;
 298
 299                 vreg_l2a_3p1: ldo2 {
 300                         regulator-name = "vreg_l2a_3p1";
 301                         regulator-min-microvolt = <3072000>;
 302                         regulator-max-microvolt = <3072000>;
 303                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 304                 };
 305
 306                 vreg_l3a_0p9: ldo3 {
 307                         regulator-name = "vreg_l3a_0p9";
 308                         regulator-min-microvolt = <928000>;
 309                         regulator-max-microvolt = <932000>;
 310                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 311                 };
 312
 313                 vreg_l5a_0p88: ldo5 {
 314                         regulator-name = "vreg_l5a_0p88";
 315                         regulator-min-microvolt = <880000>;
 316                         regulator-max-microvolt = <880000>;
 317                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 318                 };
 319
 320                 vreg_l6a_1p2: ldo6 {
 321                         regulator-name = "vreg_l6a_1p2";
 322                         regulator-min-microvolt = <1200000>;
 323                         regulator-max-microvolt = <1200000>;
 324                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 325                 };
 326
 327                 vreg_l7a_1p7: ldo7 {
 328                         regulator-name = "vreg_l7a_1p7";
 329                         regulator-min-microvolt = <1704000>;
 330                         regulator-max-microvolt = <1800000>;
 331                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 332                 };
 333
 334                 vreg_l9a_1p2: ldo9 {
 335                         regulator-name = "vreg_l9a_1p2";
 336                         regulator-min-microvolt = <1200000>;
 337                         regulator-max-microvolt = <1200000>;
 338                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 339                 };
 340
 341                 vreg_l10a_1p8: ldo10 {
 342                         regulator-name = "vreg_l10a_1p8";
 343                         regulator-min-microvolt = <1800000>;
 344                         regulator-max-microvolt = <1800000>;
 345                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 346                 };
 347
 348                 vreg_l12a_1p8: ldo12 {
 349                         regulator-name = "vreg_l12a_1p8";
 350                         regulator-min-microvolt = <1800000>;
 351                         regulator-max-microvolt = <1800000>;
 352                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 353                 };
 354
 355                 vreg_l13a_ts_3p0: ldo13 {
 356                         regulator-name = "vreg_l13a_ts_3p0";
 357                         regulator-min-microvolt = <3008000>;
 358                         regulator-max-microvolt = <3008000>;
 359                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 360                 };
 361
 362                 vreg_l14a_1p8: ldo14 {
 363                         regulator-name = "vreg_l14a_1p8";
 364                         regulator-min-microvolt = <1800000>;
 365                         regulator-max-microvolt = <1880000>;
 366                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 367                 };
 368
 369                 vreg_l15a_1p8: ldo15 {
 370                         regulator-name = "vreg_l15a_1p8";
 371                         regulator-min-microvolt = <1800000>;
 372                         regulator-max-microvolt = <1800000>;
 373                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 374                 };
 375
 376                 vreg_l16a_2p7: ldo16 {
 377                         regulator-name = "vreg_l16a_2p7";
 378                         regulator-min-microvolt = <2704000>;
 379                         regulator-max-microvolt = <2960000>;
 380                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 381                 };
 382
 383                 vreg_l17a_3p0: ldo17 {
 384                         regulator-name = "vreg_l17a_3p0";
 385                         regulator-min-microvolt = <2856000>;
 386                         regulator-max-microvolt = <3008000>;
 387                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 388                 };
 389
 390                 vreg_l18a_0p92: ldo18 {
 391                         regulator-name = "vreg_l18a_0p92";
 392                         regulator-min-microvolt = <800000>;
 393                         regulator-max-microvolt = <912000>;
 394                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 395                 };
 396
 397                 vreg_s5a_1p9: smps5 {
 398                         regulator-name = "vreg_s5a_1p9";
 399                         regulator-min-microvolt = <1904000>;
 400                         regulator-max-microvolt = <2000000>;
 401                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 402                 };
 403
 404                 vreg_s6a_0p95: smps6 {
 405                         regulator-name = "vreg_s6a_0p95";
 406                         regulator-min-microvolt = <920000>;
 407                         regulator-max-microvolt = <1128000>;
 408                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 409                 };
 410         };
 411
 412         pm8150l-rpmh-regulators {
 413                 compatible = "qcom,pm8150l-rpmh-regulators";
 414                 qcom,pmic-id = "c";
 415
 416                 vdd-s1-supply = <&vph_pwr>;
 417                 vdd-s2-supply = <&vph_pwr>;
 418                 vdd-s3-supply = <&vph_pwr>;
 419                 vdd-s4-supply = <&vph_pwr>;
 420                 vdd-s5-supply = <&vph_pwr>;
 421                 vdd-s6-supply = <&vph_pwr>;
 422                 vdd-s7-supply = <&vph_pwr>;
 423                 vdd-s8-supply = <&vph_pwr>;
 424                 vdd-l1-l8-supply = <&vreg_s4a_1p8>;
 425                 vdd-l2-l3-supply = <&vreg_s8c_1p3>;
 426                 vdd-l4-l5-l6-supply = <&vreg_bob>;
 427                 vdd-l7-l11-supply = <&vreg_bob>;
 428                 vdd-l9-l10-supply = <&vreg_bob>;
 429                 vdd-bob-supply = <&vph_pwr>;
 430
 431                 vreg_bob: bob {
 432                         regulator-name = "vreg_bob";
 433                         regulator-min-microvolt = <3008000>;
 434                         regulator-max-microvolt = <4000000>;
 435                         regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 436                 };
 437
 438                 vreg_l1c_1p8: ldo1 {
 439                         regulator-name = "vreg_l1c_1p8";
 440                         regulator-min-microvolt = <1800000>;
 441                         regulator-max-microvolt = <1800000>;
 442                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 443                 };
 444
 445                 vreg_l2c_1p2: ldo2 {
 446                         regulator-name = "vreg_l2c_1p2";
 447                         regulator-min-microvolt = <1200000>;
 448                         regulator-max-microvolt = <1200000>;
 449                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 450                 };
 451
 452                 vreg_l3c_0p8: ldo3 {
 453                         regulator-name = "vreg_l3c_0p8";
 454                         regulator-min-microvolt = <800000>;
 455                         regulator-max-microvolt = <800000>;
 456                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 457                 };
 458
 459                 vreg_l4c_1p7: ldo4 {
 460                         regulator-name = "vreg_l4c_1p7";
 461                         regulator-min-microvolt = <1704000>;
 462                         regulator-max-microvolt = <2928000>;
 463                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 464                 };
 465
 466                 vreg_l5c_1p8: ldo5 {
 467                         regulator-name = "vreg_l5c_1p8";
 468                         regulator-min-microvolt = <1800000>;
 469                         regulator-max-microvolt = <2928000>;
 470                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 471                 };
 472
 473                 vreg_l6c_2p96: ldo6 {
 474                         regulator-name = "vreg_l6c_2p96";
 475                         regulator-min-microvolt = <1800000>;
 476                         regulator-max-microvolt = <2960000>;
 477                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 478                 };
 479
 480                 vreg_l7c_cam_vcm0_2p85: ldo7 {
 481                         regulator-name = "vreg_l7c_cam_vcm0_2p85";
 482                         regulator-min-microvolt = <2856000>;
 483                         regulator-max-microvolt = <3104000>;
 484                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 485                 };
 486
 487                 vreg_l8c_1p8: ldo8 {
 488                         regulator-name = "vreg_l8c_1p8";
 489                         regulator-min-microvolt = <1800000>;
 490                         regulator-max-microvolt = <1800000>;
 491                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 492                 };
 493
 494                 vreg_l9c_2p96: ldo9 {
 495                         regulator-name = "vreg_l9c_2p96";
 496                         regulator-min-microvolt = <2704000>;
 497                         regulator-max-microvolt = <2960000>;
 498                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 499                 };
 500
 501                 vreg_l10c_3p0: ldo10 {
 502                         regulator-name = "vreg_l10c_3p0";
 503                         regulator-min-microvolt = <3000000>;
 504                         regulator-max-microvolt = <3000000>;
 505                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 506                 };
 507
 508                 vreg_l11c_3p3: ldo11 {
 509                         regulator-name = "vreg_l11c_3p3";
 510                         regulator-min-microvolt = <3296000>;
 511                         regulator-max-microvolt = <3296000>;
 512                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 513                         regulator-always-on;
 514                 };
 515
 516                 vreg_s8c_1p3: smps8 {
 517                         regulator-name = "vreg_s8c_1p3";
 518                         regulator-min-microvolt = <1352000>;
 519                         regulator-max-microvolt = <1352000>;
 520                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 521                 };
 522         };
 523 };
 524
 525 &cdsp {
 526         status = "okay";
 527         firmware-name = "qcom/sm8250/cdsp.mbn";
 528 };
 529
 530 &dsi0 {
 531         status = "okay";
 532         vdda-supply = <&vreg_l9a_1p2>;
 533
 534 #if 0
 535         qcom,dual-dsi-mode;
 536         qcom,master-dsi;
 537 #endif
 538
 539         ports {
 540                 port@1 {
 541                         endpoint {
 542                                 remote-endpoint = <&lt9611_a>;
 543                                 data-lanes = <0 1 2 3>;
 544                         };
 545                 };
 546         };
 547 };
 548
 549 &dsi0_phy {
 550         status = "okay";
 551         vdds-supply = <&vreg_l5a_0p88>;
 552 };
 553
 554 &gmu {
 555         status = "okay";
 556 };
 557
 558 &gpu {
 559         status = "okay";
 560
 561         zap-shader {
 562                 memory-region = <&gpu_mem>;
 563                 firmware-name = "qcom/sm8250/a650_zap.mbn";
 564         };
 565 };
 566
 567 /* LS-I2C0 */
 568 &i2c4 {
 569         status = "okay";
 570 };
 571
 572 &i2c5 {
 573         status = "okay";
 574         clock-frequency = <400000>;
 575
 576         lt9611_codec: hdmi-bridge@2b {
 577                 compatible = "lontium,lt9611uxc";
 578                 reg = <0x2b>;
 579                 #sound-dai-cells = <1>;
 580
 581                 interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>;
 582
 583                 reset-gpios = <&pm8150l_gpios 5 GPIO_ACTIVE_HIGH>;
 584
 585                 vdd-supply = <&lt9611_1v2>;
 586                 vcc-supply = <&lt9611_3v3>;
 587
 588                 pinctrl-names = "default";
 589                 pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
 590
 591                 ports {
 592                         #address-cells = <1>;
 593                         #size-cells = <0>;
 594
 595                         port@0 {
 596                                 reg = <0>;
 597
 598                                 lt9611_a: endpoint {
 599                                         remote-endpoint = <&dsi0_out>;
 600                                 };
 601                         };
 602
 603 #if 0
 604                         port@1 {
 605                                 reg = <1>;
 606
 607                                 lt9611_b: endpoint {
 608                                         remote-endpoint = <&dsi1_out>;
 609                                 };
 610                         };
 611 #endif
 612
 613                         port@2 {
 614                                 reg = <2>;
 615
 616                                 lt9611_out: endpoint {
 617                                         remote-endpoint = <&hdmi_con>;
 618                                 };
 619                         };
 620
 621                 };
 622         };
 623 };
 624
 625 /* LS-I2C1 */
 626 &i2c15 {
 627         status = "okay";
 628 };
 629
 630 &mdss {
 631         status = "okay";
 632 };
 633
 634 &mdss_mdp {
 635         status = "okay";
 636 };
 637
 638 &pm8150_adc {
 639         xo-therm@4c {
 640                 reg = <ADC5_XO_THERM_100K_PU>;
 641                 qcom,ratiometric;
 642                 qcom,hw-settle-time = <200>;
 643         };
 644
 645         wifi-therm@4e {
 646                 reg = <ADC5_AMUX_THM2_100K_PU>;
 647                 qcom,ratiometric;
 648                 qcom,hw-settle-time = <200>;
 649         };
 650 };
 651
 652 &pm8150_adc_tm {
 653         status = "okay";
 654
 655         xo-therm@0 {
 656                 reg = <0>;
 657                 io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
 658                 qcom,ratiometric;
 659                 qcom,hw-settle-time-us = <200>;
 660         };
 661
 662         wifi-therm@1 {
 663                 reg = <1>;
 664                 io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
 665                 qcom,ratiometric;
 666                 qcom,hw-settle-time-us = <200>;
 667         };
 668 };
 669
 670 &pcie0 {
 671         status = "okay";
 672 };
 673
 674 &pcie0_phy {
 675         status = "okay";
 676         vdda-phy-supply = <&vreg_l5a_0p88>;
 677         vdda-pll-supply = <&vreg_l9a_1p2>;
 678 };
 679
 680 &pcie1 {
 681         status = "okay";
 682 };
 683
 684 &pcie1_phy {
 685         status = "okay";
 686         vdda-phy-supply = <&vreg_l5a_0p88>;
 687         vdda-pll-supply = <&vreg_l9a_1p2>;
 688 };
 689
 690 &pcie2 {
 691         status = "okay";
 692 };
 693
 694 &pcie2_phy {
 695         status = "okay";
 696         vdda-phy-supply = <&vreg_l5a_0p88>;
 697         vdda-pll-supply = <&vreg_l9a_1p2>;
 698 };
 699
 700 &pm8150_gpios {
 701         gpio-reserved-ranges = <1 1>, <3 2>, <7 1>;
 702         gpio-line-names =
 703                 "NC",
 704                 "OPTION2",
 705                 "PM_GPIO-F",
 706                 "PM_SLP_CLK_IN",
 707                 "OPTION1",
 708                 "VOL_UP_N",
 709                 "PM8250_GPIO7", /* Blue LED */
 710                 "SP_ARI_PWR_ALARM",
 711                 "GPIO_9_P", /* Yellow LED */
 712                 "GPIO_10_P"; /* Green LED */
 713 };
 714
 715 &pm8150b_adc {
 716         conn-therm@4f {
 717                 reg = <ADC5_AMUX_THM3_100K_PU>;
 718                 qcom,ratiometric;
 719                 qcom,hw-settle-time = <200>;
 720         };
 721 };
 722
 723 &pm8150b_adc_tm {
 724         status = "okay";
 725
 726         conn-therm@0 {
 727                 reg = <0>;
 728                 io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
 729                 qcom,ratiometric;
 730                 qcom,hw-settle-time-us = <200>;
 731         };
 732 };
 733
 734 &pm8150b_gpios {
 735         gpio-line-names =
 736                 "NC",
 737                 "NC",
 738                 "NC",
 739                 "NC",
 740                 "HAP_BOOST_EN", /* SOM */
 741                 "SMB_STAT", /* SOM */
 742                 "NC",
 743                 "NC",
 744                 "SDM_FORCE_USB_BOOT",
 745                 "NC",
 746                 "NC",
 747                 "NC";
 748 };
 749
 750 &pm8150l_adc {
 751         skin-msm-therm@4e {
 752                 reg = <ADC5_AMUX_THM2_100K_PU>;
 753                 qcom,ratiometric;
 754                 qcom,hw-settle-time = <200>;
 755         };
 756
 757         pm8150l-therm@4f {
 758                 reg = <ADC5_AMUX_THM3_100K_PU>;
 759                 qcom,ratiometric;
 760                 qcom,hw-settle-time = <200>;
 761         };
 762 };
 763
 764 &pm8150l_adc_tm {
 765         status = "okay";
 766
 767         skin-msm-therm@0 {
 768                 reg = <0>;
 769                 io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>;
 770                 qcom,ratiometric;
 771                 qcom,hw-settle-time-us = <200>;
 772         };
 773
 774         pm8150l-therm@1 {
 775                 reg = <1>;
 776                 io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>;
 777                 qcom,ratiometric;
 778                 qcom,hw-settle-time-us = <200>;
 779         };
 780 };
 781
 782 &pm8150l_gpios {
 783         gpio-line-names =
 784                 "NC",
 785                 "PM3003A_EN",
 786                 "NC",
 787                 "NC",
 788                 "PM_GPIO5", /* HDMI RST_N */
 789                 "PM_GPIO-A", /* PWM */
 790                 "PM_GPIO7",
 791                 "NC",
 792                 "NC",
 793                 "PM_GPIO-B",
 794                 "NC",
 795                 "PM3003A_MODE";
 796
 797         lt9611_rst_pin: lt9611-rst-pin {
 798                 pins = "gpio5";
 799                 function = "normal";
 800
 801                 output-high;
 802                 input-disable;
 803                 power-source = <0>;
 804         };
 805 };
 806
 807 &qupv3_id_0 {
 808         status = "okay";
 809 };
 810
 811 &qupv3_id_1 {
 812         status = "okay";
 813 };
 814
 815 &qupv3_id_2 {
 816         status = "okay";
 817 };
 818
 819 &q6afedai {
 820         qi2s@16 {
 821                 reg = <16>;
 822                 qcom,sd-lines = <0 1 2 3>;
 823         };
 824 };
 825
 826 /* TERT I2S Uses 1 I2S SD Lines for audio on LT9611 HDMI Bridge */
 827 &q6afedai {
 828         qi2s@20 {
 829                 reg = <20>;
 830                 qcom,sd-lines = <0>;
 831         };
 832 };
 833
 834 &q6asmdai {
 835         dai@0 {
 836                 reg = <0>;
 837         };
 838
 839         dai@1 {
 840                 reg = <1>;
 841         };
 842
 843         dai@2 {
 844                 reg = <2>;
 845         };
 846 };
 847
 848 &sdhc_2 {
 849         status = "okay";
 850         pinctrl-names = "default";
 851         pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
 852         vmmc-supply = <&vreg_l9c_2p96>;
 853         vqmmc-supply = <&vreg_l6c_2p96>;
 854         cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
 855         bus-width = <4>;
 856         no-sdio;
 857         no-emmc;
 858 };
 859
 860 &sound {
 861         compatible = "qcom,qrb5165-rb5-sndcard";
 862         pinctrl-0 = <&tert_mi2s_active>;
 863         pinctrl-names = "default";
 864         model = "Qualcomm-RB5-WSA8815-Speakers-DMIC0";
 865         audio-routing =
 866                 "SpkrLeft IN", "WSA_SPK1 OUT",
 867                 "SpkrRight IN", "WSA_SPK2 OUT",
 868                 "VA DMIC0", "vdd-micb",
 869                 "VA DMIC1", "vdd-micb",
 870                 "MM_DL1",  "MultiMedia1 Playback",
 871                 "MM_DL2",  "MultiMedia2 Playback",
 872                 "MultiMedia3 Capture", "MM_UL3";
 873
 874         mm1-dai-link {
 875                 link-name = "MultiMedia1";
 876                 cpu {
 877                         sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
 878                 };
 879         };
 880
 881         mm2-dai-link {
 882                 link-name = "MultiMedia2";
 883                 cpu {
 884                         sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
 885                 };
 886         };
 887
 888         mm3-dai-link {
 889                 link-name = "MultiMedia3";
 890                 cpu {
 891                         sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
 892                 };
 893         };
 894
 895         hdmi-dai-link {
 896                 link-name = "HDMI Playback";
 897                 cpu {
 898                         sound-dai = <&q6afedai TERTIARY_MI2S_RX>;
 899                 };
 900
 901                 platform {
 902                         sound-dai = <&q6routing>;
 903                 };
 904
 905                 codec {
 906                         sound-dai =  <&lt9611_codec 0>;
 907                 };
 908         };
 909
 910         dma-dai-link {
 911                 link-name = "WSA Playback";
 912                 cpu {
 913                         sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>;
 914                 };
 915
 916                 platform {
 917                         sound-dai = <&q6routing>;
 918                 };
 919
 920                 codec {
 921                         sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
 922                 };
 923         };
 924
 925         va-dai-link {
 926                 link-name = "VA Capture";
 927                 cpu {
 928                         sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>;
 929                 };
 930
 931                 platform {
 932                         sound-dai = <&q6routing>;
 933                 };
 934
 935                 codec {
 936                         sound-dai = <&vamacro 0>;
 937                 };
 938         };
 939 };
 940
 941 /* CAN */
 942 &spi0 {
 943         status = "okay";
 944         pinctrl-names = "default";
 945         pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs_gpio>;
 946         cs-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
 947
 948         can@0 {
 949                 compatible = "microchip,mcp2518fd";
 950                 reg = <0>;
 951                 clocks = <&clk40M>;
 952                 interrupts-extended = <&tlmm 15 IRQ_TYPE_LEVEL_LOW>;
 953                 spi-max-frequency = <10000000>;
 954                 vdd-supply = <&vdc_5v>;
 955                 xceiver-supply = <&vdc_5v>;
 956         };
 957 };
 958
 959 &swr0 {
 960         left_spkr: wsa8810-left{
 961                 compatible = "sdw10217211000";
 962                 reg = <0 3>;
 963                 powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
 964                 #thermal-sensor-cells = <0>;
 965                 sound-name-prefix = "SpkrLeft";
 966                 #sound-dai-cells = <0>;
 967         };
 968
 969         right_spkr: wsa8810-right{
 970                 compatible = "sdw10217211000";
 971                 reg = <0 4>;
 972                 powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
 973                 #thermal-sensor-cells = <0>;
 974                 sound-name-prefix = "SpkrRight";
 975                 #sound-dai-cells = <0>;
 976         };
 977 };
 978
 979 &tlmm {
 980         gpio-reserved-ranges = <40 4>;
 981         gpio-line-names =
 982                 "GPIO-MM",
 983                 "GPIO-NN",
 984                 "GPIO-OO",
 985                 "GPIO-PP",
 986                 "GPIO-A",
 987                 "GPIO-C",
 988                 "GPIO-E",
 989                 "GPIO-D",
 990                 "I2C0-SDA",
 991                 "I2C0-SCL",
 992                 "GPIO-TT", /* GPIO_10 */
 993                 "NC",
 994                 "GPIO_12_I2C_SDA",
 995                 "GPIO_13_I2C_SCL",
 996                 "GPIO-X",
 997                 "GPIO_15_RGMII_INT",
 998                 "HST_BT_UART_CTS",
 999                 "HST_BT_UART_RFR",
1000                 "HST_BT_UART_TX",
1001                 "HST_BT_UART_RX",
1002                 "HST_WLAN_EN", /* GPIO_20 */
1003                 "HST_BT_EN",
1004                 "GPIO-AAA",
1005                 "GPIO-BBB",
1006                 "GPIO-CCC",
1007                 "GPIO-Z",
1008                 "GPIO-DDD",
1009                 "GPIO-BB",
1010                 "GPIO_28_CAN_SPI_MISO",
1011                 "GPIO_29_CAN_SPI_MOSI",
1012                 "GPIO_30_CAN_SPI_CLK", /* GPIO_30 */
1013                 "GPIO_31_CAN_SPI_CS",
1014                 "GPIO-UU",
1015                 "NC",
1016                 "UART1_TXD_SOM",
1017                 "UART1_RXD_SOM",
1018                 "UART0_CTS",
1019                 "UART0_RTS",
1020                 "UART0_TXD",
1021                 "UART0_RXD",
1022                 "SPI1_MISO", /* GPIO_40 */
1023                 "SPI1_MOSI",
1024                 "SPI1_CLK",
1025                 "SPI1_CS",
1026                 "I2C1_SDA",
1027                 "I2C1_SCL",
1028                 "GPIO-F",
1029                 "GPIO-JJ",
1030                 "Board_ID1",
1031                 "Board_ID2",
1032                 "NC", /* GPIO_50 */
1033                 "NC",
1034                 "SPI0_MISO",
1035                 "SPI0_MOSI",
1036                 "SPI0_SCLK",
1037                 "SPI0_CS",
1038                 "GPIO-QQ",
1039                 "GPIO-RR",
1040                 "USB2LAN_RESET",
1041                 "USB2LAN_EXTWAKE",
1042                 "NC", /* GPIO_60 */
1043                 "NC",
1044                 "NC",
1045                 "LT9611_INT",
1046                 "GPIO-AA",
1047                 "USB_CC_DIR",
1048                 "GPIO-G",
1049                 "GPIO-LL",
1050                 "USB_DP_HPD_1P8",
1051                 "NC",
1052                 "NC", /* GPIO_70 */
1053                 "SD_CMD",
1054                 "SD_DAT3",
1055                 "SD_SCLK",
1056                 "SD_DAT2",
1057                 "SD_DAT1",
1058                 "SD_DAT0", /* BOOT_CFG3 */
1059                 "SD_UFS_CARD_DET_N",
1060                 "GPIO-II",
1061                 "PCIE0_RST_N",
1062                 "PCIE0_CLK_REQ_N", /* GPIO_80 */
1063                 "PCIE0_WAKE_N",
1064                 "GPIO-CC",
1065                 "GPIO-DD",
1066                 "GPIO-EE",
1067                 "GPIO-FF",
1068                 "GPIO-GG",
1069                 "GPIO-HH",
1070                 "GPIO-VV",
1071                 "GPIO-WW",
1072                 "NC", /* GPIO_90 */
1073                 "NC",
1074                 "GPIO-K",
1075                 "GPIO-I",
1076                 "CSI0_MCLK",
1077                 "CSI1_MCLK",
1078                 "CSI2_MCLK",
1079                 "CSI3_MCLK",
1080                 "GPIO-AA", /* CSI4_MCLK */
1081                 "GPIO-BB", /* CSI5_MCLK */
1082                 "GPIO-KK", /* GPIO_100 */
1083                 "CCI_I2C_SDA0",
1084                 "CCI_I2C_SCL0",
1085                 "CCI_I2C_SDA1",
1086                 "CCI_I2C_SCL1",
1087                 "CCI_I2C_SDA2",
1088                 "CCI_I2C_SCL2",
1089                 "CCI_I2C_SDA3",
1090                 "CCI_I2C_SCL3",
1091                 "GPIO-L",
1092                 "NC", /* GPIO_110 */
1093                 "NC",
1094                 "ACCEL_INT",
1095                 "GYRO_INT",
1096                 "GPIO-J",
1097                 "GPIO-YY",
1098                 "GPIO-H",
1099                 "GPIO-ZZ",
1100                 "NC",
1101                 "NC",
1102                 "NC", /* GPIO_120 */
1103                 "NC",
1104                 "MAG_INT",
1105                 "MAG_DRDY_INT",
1106                 "HST_SW_CTRL",
1107                 "GPIO-M",
1108                 "GPIO-N",
1109                 "GPIO-O",
1110                 "GPIO-P",
1111                 "PS_INT",
1112                 "WSA1_EN", /* GPIO_130 */
1113                 "USB_HUB_RESET",
1114                 "SDM_FORCE_USB_BOOT",
1115                 "I2S1_CLK_HDMI",
1116                 "I2S1_DATA0_HDMI",
1117                 "I2S1_WS_HDMI",
1118                 "GPIO-B",
1119                 "GPIO_137", /* To LT9611_I2S_MCLK_3V3 */
1120                 "PCM_CLK",
1121                 "PCM_DI",
1122                 "PCM_DO", /* GPIO_140 */
1123                 "PCM_FS",
1124                 "HST_SLIM_CLK",
1125                 "HST_SLIM_DATA",
1126                 "GPIO-U",
1127                 "GPIO-Y",
1128                 "GPIO-R",
1129                 "GPIO-Q",
1130                 "GPIO-S",
1131                 "GPIO-T",
1132                 "GPIO-V", /* GPIO_150 */
1133                 "GPIO-W",
1134                 "DMIC_CLK1",
1135                 "DMIC_DATA1",
1136                 "DMIC_CLK2",
1137                 "DMIC_DATA2",
1138                 "WSA_SWR_CLK",
1139                 "WSA_SWR_DATA",
1140                 "DMIC_CLK3",
1141                 "DMIC_DATA3",
1142                 "I2C4_SDA", /* GPIO_160 */
1143                 "I2C4_SCL",
1144                 "SPI3_CS1",
1145                 "SPI3_CS2",
1146                 "SPI2_MISO_LS3",
1147                 "SPI2_MOSI_LS3",
1148                 "SPI2_CLK_LS3",
1149                 "SPI2_ACCEL_CS_LS3",
1150                 "SPI2_CS1",
1151                 "NC",
1152                 "GPIO-SS", /* GPIO_170 */
1153                 "GPIO-XX",
1154                 "SPI3_MISO",
1155                 "SPI3_MOSI",
1156                 "SPI3_CLK",
1157                 "SPI3_CS",
1158                 "HST_BLE_SNS_UART_TX",
1159                 "HST_BLE_SNS_UART_RX",
1160                 "HST_WLAN_UART_TX",
1161                 "HST_WLAN_UART_RX";
1162
1163         lt9611_irq_pin: lt9611-irq {
1164                 pins = "gpio63";
1165                 function = "gpio";
1166                 bias-disable;
1167         };
1168
1169         sdc2_default_state: sdc2-default {
1170                 clk {
1171                         pins = "sdc2_clk";
1172                         bias-disable;
1173                         drive-strength = <16>;
1174                 };
1175
1176                 cmd {
1177                         pins = "sdc2_cmd";
1178                         bias-pull-up;
1179                         drive-strength = <10>;
1180                 };
1181
1182                 data {
1183                         pins = "sdc2_data";
1184                         bias-pull-up;
1185                         drive-strength = <10>;
1186                 };
1187         };
1188
1189         sdc2_card_det_n: sd-card-det-n {
1190                 pins = "gpio77";
1191                 function = "gpio";
1192                 bias-pull-up;
1193         };
1194 };
1195
1196 &uart12 {
1197         status = "okay";
1198 };
1199
1200 &ufs_mem_hc {
1201         status = "okay";
1202
1203         vcc-supply = <&vreg_l17a_3p0>;
1204         vcc-max-microamp = <800000>;
1205         vccq-supply = <&vreg_l6a_1p2>;
1206         vccq-max-microamp = <800000>;
1207         vccq2-supply = <&vreg_s4a_1p8>;
1208         vccq2-max-microamp = <800000>;
1209 };
1210
1211 &ufs_mem_phy {
1212         status = "okay";
1213
1214         vdda-phy-supply = <&vreg_l5a_0p88>;
1215         vdda-max-microamp = <89900>;
1216         vdda-pll-supply = <&vreg_l9a_1p2>;
1217         vdda-pll-max-microamp = <18800>;
1218 };
1219
1220 &usb_1 {
1221         status = "okay";
1222 };
1223
1224 &usb_1_dwc3 {
1225         dr_mode = "peripheral";
1226 };
1227
1228 &usb_1_hsphy {
1229         status = "okay";
1230
1231         vdda-pll-supply = <&vreg_l5a_0p88>;
1232         vdda33-supply = <&vreg_l2a_3p1>;
1233         vdda18-supply = <&vreg_l12a_1p8>;
1234 };
1235
1236 &usb_1_qmpphy {
1237         status = "okay";
1238
1239         vdda-phy-supply = <&vreg_l9a_1p2>;
1240         vdda-pll-supply = <&vreg_l18a_0p92>;
1241 };
1242
1243 &usb_2 {
1244         status = "okay";
1245 };
1246
1247 &usb_2_dwc3 {
1248         dr_mode = "host";
1249 };
1250
1251 &usb_2_hsphy {
1252         status = "okay";
1253
1254         vdda-pll-supply = <&vreg_l5a_0p88>;
1255         vdda33-supply = <&vreg_l2a_3p1>;
1256         vdda18-supply = <&vreg_l12a_1p8>;
1257 };
1258
1259 &usb_2_qmpphy {
1260         status = "okay";
1261
1262         vdda-phy-supply = <&vreg_l9a_1p2>;
1263         vdda-pll-supply = <&vreg_l18a_0p92>;
1264 };
1265
1266 &vamacro {
1267         pinctrl-0 = <&dmic01_active>;
1268         pinctrl-names = "default";
1269         vdd-micb-supply = <&vreg_s4a_1p8>;
1270         qcom,dmic-sample-rate = <600000>;
1271 };
1272
1273 &venus {
1274         status = "okay";
1275 };
1276
1277 /* PINCTRL - additions to nodes defined in sm8250.dtsi */
1278 &qup_spi0_cs_gpio {
1279         drive-strength = <6>;
1280         bias-disable;
1281 };
1282
1283 &qup_spi0_data_clk {
1284         drive-strength = <6>;
1285         bias-disable;
1286 };