arch/arm64/boot/dts/qcom/pm8916.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 #include <dt-bindings/iio/qcom,spmi-vadc.h>
   3 #include <dt-bindings/input/linux-event-codes.h>
   4 #include <dt-bindings/interrupt-controller/irq.h>
   5 #include <dt-bindings/spmi/spmi.h>
   6
   7 &spmi_bus {
   8
   9         pm8916_0: pmic@0 {
  10                 compatible = "qcom,pm8916", "qcom,spmi-pmic";
  11                 reg = <0x0 SPMI_USID>;
  12                 #address-cells = <1>;
  13                 #size-cells = <0>;
  14
  15                 pon@800 {
  16                         compatible = "qcom,pm8916-pon";
  17                         reg = <0x800>;
  18                         mode-bootloader = <0x2>;
  19                         mode-recovery = <0x1>;
  20
  21                         pwrkey {
  22                                 compatible = "qcom,pm8941-pwrkey";
  23                                 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
  24                                 debounce = <15625>;
  25                                 bias-pull-up;
  26                                 linux,code = <KEY_POWER>;
  27                         };
  28
  29                         pm8916_resin: resin {
  30                                 compatible = "qcom,pm8941-resin";
  31                                 interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
  32                                 debounce = <15625>;
  33                                 bias-pull-up;
  34                                 status = "disabled";
  35                         };
  36
  37                         watchdog {
  38                                 compatible = "qcom,pm8916-wdt";
  39                                 interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
  40                                 timeout-sec = <60>;
  41                         };
  42                 };
  43
  44                 pm8916_temp: temp-alarm@2400 {
  45                         compatible = "qcom,spmi-temp-alarm";
  46                         reg = <0x2400>;
  47                         interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
  48                         io-channels = <&pm8916_vadc VADC_DIE_TEMP>;
  49                         io-channel-names = "thermal";
  50                         #thermal-sensor-cells = <0>;
  51                 };
  52
  53                 pm8916_vadc: adc@3100 {
  54                         compatible = "qcom,spmi-vadc";
  55                         reg = <0x3100>;
  56                         interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
  57                         #address-cells = <1>;
  58                         #size-cells = <0>;
  59                         #io-channel-cells = <1>;
  60
  61                         adc-chan@0 {
  62                                 reg = <VADC_USBIN>;
  63                                 qcom,pre-scaling = <1 10>;
  64                         };
  65                         adc-chan@7 {
  66                                 reg = <VADC_VSYS>;
  67                                 qcom,pre-scaling = <1 3>;
  68                         };
  69                         adc-chan@8 {
  70                                 reg = <VADC_DIE_TEMP>;
  71                         };
  72                         adc-chan@9 {
  73                                 reg = <VADC_REF_625MV>;
  74                         };
  75                         adc-chan@a {
  76                                 reg = <VADC_REF_1250MV>;
  77                         };
  78                         adc-chan@e {
  79                                 reg = <VADC_GND_REF>;
  80                         };
  81                         adc-chan@f {
  82                                 reg = <VADC_VDD_VADC>;
  83                         };
  84                 };
  85
  86                 rtc@6000 {
  87                         compatible = "qcom,pm8941-rtc";
  88                         reg = <0x6000>;
  89                         reg-names = "rtc", "alarm";
  90                         interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
  91                 };
  92
  93                 pm8916_mpps: mpps@a000 {
  94                         compatible = "qcom,pm8916-mpp";
  95                         reg = <0xa000>;
  96                         gpio-controller;
  97                         #gpio-cells = <2>;
  98                         interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
  99                                      <0 0xa1 0 IRQ_TYPE_NONE>,
 100                                      <0 0xa2 0 IRQ_TYPE_NONE>,
 101                                      <0 0xa3 0 IRQ_TYPE_NONE>;
 102                 };
 103
 104                 pm8916_gpios: gpios@c000 {
 105                         compatible = "qcom,pm8916-gpio";
 106                         reg = <0xc000>;
 107                         gpio-controller;
 108                         #gpio-cells = <2>;
 109                         interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
 110                                      <0 0xc1 0 IRQ_TYPE_NONE>,
 111                                      <0 0xc2 0 IRQ_TYPE_NONE>,
 112                                      <0 0xc3 0 IRQ_TYPE_NONE>;
 113                 };
 114         };
 115
 116         pm8916_1: pmic@1 {
 117                 compatible = "qcom,pm8916", "qcom,spmi-pmic";
 118                 reg = <0x1 SPMI_USID>;
 119                 #address-cells = <1>;
 120                 #size-cells = <0>;
 121
 122                 pm8916_vib: vibrator@c000 {
 123                         compatible = "qcom,pm8916-vib";
 124                         reg = <0xc000>;
 125                         status = "disabled";
 126                 };
 127
 128                 wcd_codec: audio-codec@f000 {
 129                         compatible = "qcom,pm8916-wcd-analog-codec";
 130                         reg = <0xf000>;
 131                         reg-names = "pmic-codec-core";
 132                         clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
 133                         clock-names = "mclk";
 134                         interrupt-parent = <&spmi_bus>;
 135                         interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
 136                                      <0x1 0xf0 0x1 IRQ_TYPE_NONE>,
 137                                      <0x1 0xf0 0x2 IRQ_TYPE_NONE>,
 138                                      <0x1 0xf0 0x3 IRQ_TYPE_NONE>,
 139                                      <0x1 0xf0 0x4 IRQ_TYPE_NONE>,
 140                                      <0x1 0xf0 0x5 IRQ_TYPE_NONE>,
 141                                      <0x1 0xf0 0x6 IRQ_TYPE_NONE>,
 142                                      <0x1 0xf0 0x7 IRQ_TYPE_NONE>,
 143                                      <0x1 0xf1 0x0 IRQ_TYPE_NONE>,
 144                                      <0x1 0xf1 0x1 IRQ_TYPE_NONE>,
 145                                      <0x1 0xf1 0x2 IRQ_TYPE_NONE>,
 146                                      <0x1 0xf1 0x3 IRQ_TYPE_NONE>,
 147                                      <0x1 0xf1 0x4 IRQ_TYPE_NONE>,
 148                                      <0x1 0xf1 0x5 IRQ_TYPE_NONE>;
 149                         interrupt-names = "cdc_spk_cnp_int",
 150                                           "cdc_spk_clip_int",
 151                                           "cdc_spk_ocp_int",
 152                                           "mbhc_ins_rem_det1",
 153                                           "mbhc_but_rel_det",
 154                                           "mbhc_but_press_det",
 155                                           "mbhc_ins_rem_det",
 156                                           "mbhc_switch_int",
 157                                           "cdc_ear_ocp_int",
 158                                           "cdc_hphr_ocp_int",
 159                                           "cdc_hphl_ocp_det",
 160                                           "cdc_ear_cnp_int",
 161                                           "cdc_hphr_cnp_int",
 162                                           "cdc_hphl_cnp_int";
 163                         vdd-cdc-io-supply = <&pm8916_l5>;
 164                         vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
 165                         vdd-micbias-supply = <&pm8916_l13>;
 166                         #sound-dai-cells = <1>;
 167                 };
 168         };
 169 };