arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2
   3 /dts-v1/;
   4
   5 #include "msm8916-pm8916.dtsi"
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         model = "Alcatel OneTouch Idol 3 (4.7)";
  11         compatible = "alcatel,idol347", "qcom,msm8916";
  12
  13         aliases {
  14                 serial0 = &blsp1_uart2;
  15         };
  16
  17         chosen {
  18                 stdout-path = "serial0";
  19         };
  20
  21         gpio-keys {
  22                 compatible = "gpio-keys";
  23
  24                 pinctrl-names = "default";
  25                 pinctrl-0 = <&gpio_keys_default>;
  26
  27                 label = "GPIO Buttons";
  28
  29                 volume-up {
  30                         label = "Volume Up";
  31                         gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
  32                         linux,code = <KEY_VOLUMEUP>;
  33                 };
  34         };
  35
  36         usb_id: usb-id {
  37                 compatible = "linux,extcon-usb-gpio";
  38                 id-gpio = <&msmgpio 69 GPIO_ACTIVE_HIGH>;
  39                 pinctrl-names = "default";
  40                 pinctrl-0 = <&usb_id_default>;
  41         };
  42 };
  43
  44 &blsp1_uart2 {
  45         status = "okay";
  46 };
  47
  48 &blsp_i2c4 {
  49         status = "okay";
  50
  51         touchscreen@26 {
  52                 compatible = "mstar,msg2638";
  53                 reg = <0x26>;
  54                 interrupt-parent = <&msmgpio>;
  55                 interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
  56                 reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>;
  57                 pinctrl-names = "default";
  58                 pinctrl-0 = <&ts_int_reset_default>;
  59                 vdd-supply = <&pm8916_l17>;
  60                 vddio-supply = <&pm8916_l5>;
  61                 touchscreen-size-x = <2048>;
  62                 touchscreen-size-y = <2048>;
  63         };
  64 };
  65
  66 &blsp_i2c5 {
  67         status = "okay";
  68
  69         magnetometer@c {
  70                 compatible = "asahi-kasei,ak09911";
  71                 reg = <0x0c>;
  72                 vdd-supply = <&pm8916_l17>;
  73                 vid-supply = <&pm8916_l6>;
  74                 reset-gpios = <&msmgpio 8 GPIO_ACTIVE_LOW>;
  75                 pinctrl-names = "default";
  76                 pinctrl-0 = <&mag_reset_default>;
  77                 mount-matrix = "0", "1", "0",
  78                                "-1", "0", "0",
  79                                "0", "0", "1";
  80         };
  81
  82         accelerometer@f {
  83                 compatible = "kionix,kxtj21009";
  84                 reg = <0x0f>;
  85                 vdd-supply = <&pm8916_l17>;
  86                 vddio-supply = <&pm8916_l6>;
  87                 interrupt-parent = <&msmgpio>;
  88                 interrupts = <31 IRQ_TYPE_EDGE_RISING>;
  89                 pinctrl-names = "default";
  90                 pinctrl-0 = <&accel_int_default>;
  91                 mount-matrix = "-1", "0", "0",
  92                                "0", "1", "0",
  93                                "0", "0", "-1";
  94         };
  95
  96         proximity@48 {
  97                 compatible = "sensortek,stk3310";
  98                 reg = <0x48>;
  99                 interrupt-parent = <&msmgpio>;
 100                 interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
 101                 pinctrl-names = "default";
 102                 pinctrl-0 = <&proximity_int_default>;
 103         };
 104
 105         gyroscope@68 {
 106                 compatible = "bosch,bmg160";
 107                 reg = <0x68>;
 108                 vdd-supply = <&pm8916_l17>;
 109                 vddio-supply = <&pm8916_l6>;
 110                 interrupt-parent = <&msmgpio>;
 111                 interrupts = <97 IRQ_TYPE_EDGE_RISING>,
 112                              <98 IRQ_TYPE_EDGE_RISING>;
 113                 pinctrl-names = "default";
 114                 pinctrl-0 = <&gyro_int_default>;
 115         };
 116 };
 117
 118 &pm8916_resin {
 119         status = "okay";
 120         linux,code = <KEY_VOLUMEDOWN>;
 121 };
 122
 123 &pm8916_vib {
 124         status = "okay";
 125 };
 126
 127 &pronto {
 128         status = "okay";
 129 };
 130
 131 &sdhc_1 {
 132         status = "okay";
 133
 134         pinctrl-names = "default", "sleep";
 135         pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
 136         pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
 137 };
 138
 139 &sdhc_2 {
 140         status = "okay";
 141
 142         pinctrl-names = "default", "sleep";
 143         pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
 144         pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
 145
 146         cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
 147 };
 148
 149 &usb {
 150         status = "okay";
 151         extcon = <&usb_id>, <&usb_id>;
 152 };
 153
 154 &usb_hs_phy {
 155         extcon = <&usb_id>;
 156 };
 157
 158 &smd_rpm_regulators {
 159         vdd_l1_l2_l3-supply = <&pm8916_s3>;
 160         vdd_l4_l5_l6-supply = <&pm8916_s4>;
 161         vdd_l7-supply = <&pm8916_s4>;
 162
 163         s3 {
 164                 regulator-min-microvolt = <1200000>;
 165                 regulator-max-microvolt = <1300000>;
 166         };
 167
 168         s4 {
 169                 regulator-min-microvolt = <1800000>;
 170                 regulator-max-microvolt = <2100000>;
 171         };
 172
 173         l1 {
 174                 regulator-min-microvolt = <1225000>;
 175                 regulator-max-microvolt = <1225000>;
 176         };
 177
 178         l2 {
 179                 regulator-min-microvolt = <1200000>;
 180                 regulator-max-microvolt = <1200000>;
 181         };
 182
 183         l4 {
 184                 regulator-min-microvolt = <2050000>;
 185                 regulator-max-microvolt = <2050000>;
 186         };
 187
 188         l5 {
 189                 regulator-min-microvolt = <1800000>;
 190                 regulator-max-microvolt = <1800000>;
 191         };
 192
 193         l6 {
 194                 regulator-min-microvolt = <1800000>;
 195                 regulator-max-microvolt = <1800000>;
 196         };
 197
 198         l7 {
 199                 regulator-min-microvolt = <1800000>;
 200                 regulator-max-microvolt = <1800000>;
 201         };
 202
 203         l8 {
 204                 regulator-min-microvolt = <2850000>;
 205                 regulator-max-microvolt = <2900000>;
 206         };
 207
 208         l9 {
 209                 regulator-min-microvolt = <3300000>;
 210                 regulator-max-microvolt = <3300000>;
 211         };
 212
 213         l10 {
 214                 regulator-min-microvolt = <2700000>;
 215                 regulator-max-microvolt = <2800000>;
 216         };
 217
 218         l11 {
 219                 regulator-min-microvolt = <1800000>;
 220                 regulator-max-microvolt = <2950000>;
 221                 regulator-allow-set-load;
 222                 regulator-system-load = <200000>;
 223         };
 224
 225         l12 {
 226                 regulator-min-microvolt = <1800000>;
 227                 regulator-max-microvolt = <2950000>;
 228         };
 229
 230         l13 {
 231                 regulator-min-microvolt = <3075000>;
 232                 regulator-max-microvolt = <3075000>;
 233         };
 234
 235         l14 {
 236                 regulator-min-microvolt = <1800000>;
 237                 regulator-max-microvolt = <3300000>;
 238         };
 239
 240         l15 {
 241                 regulator-min-microvolt = <1800000>;
 242                 regulator-max-microvolt = <3300000>;
 243         };
 244
 245         l16 {
 246                 regulator-min-microvolt = <1800000>;
 247                 regulator-max-microvolt = <3300000>;
 248         };
 249
 250         l17 {
 251                 regulator-min-microvolt = <2850000>;
 252                 regulator-max-microvolt = <2850000>;
 253         };
 254
 255         l18 {
 256                 regulator-min-microvolt = <2700000>;
 257                 regulator-max-microvolt = <2700000>;
 258         };
 259 };
 260
 261 &msmgpio {
 262         accel_int_default: accel-int-default {
 263                 pins = "gpio31";
 264                 function = "gpio";
 265
 266                 drive-strength = <2>;
 267                 bias-disable;
 268         };
 269
 270         gpio_keys_default: gpio-keys-default {
 271                 pins = "gpio107";
 272                 function = "gpio";
 273
 274                 drive-strength = <2>;
 275                 bias-pull-up;
 276         };
 277
 278         gyro_int_default: gyro-int-default {
 279                 pins = "gpio97", "gpio98";
 280                 function = "gpio";
 281
 282                 drive-strength = <2>;
 283                 bias-disable;
 284         };
 285
 286         mag_reset_default: mag-reset-default {
 287                 pins = "gpio8";
 288                 function = "gpio";
 289
 290                 drive-strength = <2>;
 291                 bias-disable;
 292         };
 293
 294         proximity_int_default: proximity-int-default {
 295                 pins = "gpio12";
 296                 function = "gpio";
 297
 298                 drive-strength = <6>;
 299                 bias-pull-up;
 300         };
 301
 302         ts_int_reset_default: ts-int-reset-default {
 303                 pins = "gpio13", "gpio100";
 304                 function = "gpio";
 305
 306                 drive-strength = <2>;
 307                 bias-disable;
 308         };
 309
 310         usb_id_default: usb-id-default {
 311                 pins = "gpio69";
 312                 function = "gpio";
 313
 314                 drive-strength = <8>;
 315                 bias-pull-up;
 316         };
 317 };