arch/arm64/boot/dts/qcom/ipq8074.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (c) 2017, The Linux Foundation. All rights reserved.
   4  */
   5
   6 #include <dt-bindings/interrupt-controller/arm-gic.h>
   7 #include <dt-bindings/clock/qcom,gcc-ipq8074.h>
   8
   9 / {
  10         model = "Qualcomm Technologies, Inc. IPQ8074";
  11         compatible = "qcom,ipq8074";
  12
  13         clocks {
  14                 sleep_clk: sleep_clk {
  15                         compatible = "fixed-clock";
  16                         clock-frequency = <32000>;
  17                         #clock-cells = <0>;
  18                 };
  19
  20                 xo: xo {
  21                         compatible = "fixed-clock";
  22                         clock-frequency = <19200000>;
  23                         #clock-cells = <0>;
  24                 };
  25         };
  26
  27         cpus {
  28                 #address-cells = <0x1>;
  29                 #size-cells = <0x0>;
  30
  31                 CPU0: cpu@0 {
  32                         device_type = "cpu";
  33                         compatible = "arm,cortex-a53";
  34                         reg = <0x0>;
  35                         next-level-cache = <&L2_0>;
  36                         enable-method = "psci";
  37                 };
  38
  39                 CPU1: cpu@1 {
  40                         device_type = "cpu";
  41                         compatible = "arm,cortex-a53";
  42                         enable-method = "psci";
  43                         reg = <0x1>;
  44                         next-level-cache = <&L2_0>;
  45                 };
  46
  47                 CPU2: cpu@2 {
  48                         device_type = "cpu";
  49                         compatible = "arm,cortex-a53";
  50                         enable-method = "psci";
  51                         reg = <0x2>;
  52                         next-level-cache = <&L2_0>;
  53                 };
  54
  55                 CPU3: cpu@3 {
  56                         device_type = "cpu";
  57                         compatible = "arm,cortex-a53";
  58                         enable-method = "psci";
  59                         reg = <0x3>;
  60                         next-level-cache = <&L2_0>;
  61                 };
  62
  63                 L2_0: l2-cache {
  64                         compatible = "cache";
  65                         cache-level = <0x2>;
  66                 };
  67         };
  68
  69         pmu {
  70                 compatible = "arm,cortex-a53-pmu";
  71                 interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
  72         };
  73
  74         psci {
  75                 compatible = "arm,psci-1.0";
  76                 method = "smc";
  77         };
  78
  79         soc: soc {
  80                 #address-cells = <0x1>;
  81                 #size-cells = <0x1>;
  82                 ranges = <0 0 0 0xffffffff>;
  83                 compatible = "simple-bus";
  84
  85                 ssphy_1: phy@58000 {
  86                         compatible = "qcom,ipq8074-qmp-usb3-phy";
  87                         reg = <0x00058000 0x1c4>;
  88                         #clock-cells = <1>;
  89                         #address-cells = <1>;
  90                         #size-cells = <1>;
  91                         ranges;
  92
  93                         clocks = <&gcc GCC_USB1_AUX_CLK>,
  94                                 <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
  95                                 <&xo>;
  96                         clock-names = "aux", "cfg_ahb", "ref";
  97
  98                         resets =  <&gcc GCC_USB1_PHY_BCR>,
  99                                 <&gcc GCC_USB3PHY_1_PHY_BCR>;
 100                         reset-names = "phy","common";
 101                         status = "disabled";
 102
 103                         usb1_ssphy: lane@58200 {
 104                                 reg = <0x00058200 0x130>,       /* Tx */
 105                                       <0x00058400 0x200>,     /* Rx */
 106                                       <0x00058800 0x1f8>,     /* PCS  */
 107                                       <0x00058600 0x044>;     /* PCS misc*/
 108                                 #phy-cells = <0>;
 109                                 clocks = <&gcc GCC_USB1_PIPE_CLK>;
 110                                 clock-names = "pipe0";
 111                                 clock-output-names = "gcc_usb1_pipe_clk_src";
 112                         };
 113                 };
 114
 115                 qusb_phy_1: phy@59000 {
 116                         compatible = "qcom,ipq8074-qusb2-phy";
 117                         reg = <0x00059000 0x180>;
 118                         #phy-cells = <0>;
 119
 120                         clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
 121                                  <&xo>;
 122                         clock-names = "cfg_ahb", "ref";
 123
 124                         resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
 125                         status = "disabled";
 126                 };
 127
 128                 ssphy_0: phy@78000 {
 129                         compatible = "qcom,ipq8074-qmp-usb3-phy";
 130                         reg = <0x00078000 0x1c4>;
 131                         #clock-cells = <1>;
 132                         #address-cells = <1>;
 133                         #size-cells = <1>;
 134                         ranges;
 135
 136                         clocks = <&gcc GCC_USB0_AUX_CLK>,
 137                                 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
 138                                 <&xo>;
 139                         clock-names = "aux", "cfg_ahb", "ref";
 140
 141                         resets =  <&gcc GCC_USB0_PHY_BCR>,
 142                                 <&gcc GCC_USB3PHY_0_PHY_BCR>;
 143                         reset-names = "phy","common";
 144                         status = "disabled";
 145
 146                         usb0_ssphy: lane@78200 {
 147                                 reg = <0x00078200 0x130>,       /* Tx */
 148                                       <0x00078400 0x200>,     /* Rx */
 149                                       <0x00078800 0x1f8>,     /* PCS  */
 150                                       <0x00078600 0x044>;     /* PCS misc*/
 151                                 #phy-cells = <0>;
 152                                 clocks = <&gcc GCC_USB0_PIPE_CLK>;
 153                                 clock-names = "pipe0";
 154                                 clock-output-names = "gcc_usb0_pipe_clk_src";
 155                         };
 156                 };
 157
 158                 qusb_phy_0: phy@79000 {
 159                         compatible = "qcom,ipq8074-qusb2-phy";
 160                         reg = <0x00079000 0x180>;
 161                         #phy-cells = <0>;
 162
 163                         clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
 164                                  <&xo>;
 165                         clock-names = "cfg_ahb", "ref";
 166
 167                         resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
 168                         status = "disabled";
 169                 };
 170
 171                 pcie_phy0: phy@86000 {
 172                         compatible = "qcom,ipq8074-qmp-pcie-phy";
 173                         reg = <0x00086000 0x1000>;
 174                         #phy-cells = <0>;
 175                         clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
 176                         clock-names = "pipe_clk";
 177                         clock-output-names = "pcie20_phy0_pipe_clk";
 178
 179                         resets = <&gcc GCC_PCIE0_PHY_BCR>,
 180                                 <&gcc GCC_PCIE0PHY_PHY_BCR>;
 181                         reset-names = "phy",
 182                                       "common";
 183                         status = "disabled";
 184                 };
 185
 186                 pcie_phy1: phy@8e000 {
 187                         compatible = "qcom,ipq8074-qmp-pcie-phy";
 188                         reg = <0x0008e000 0x1000>;
 189                         #phy-cells = <0>;
 190                         clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
 191                         clock-names = "pipe_clk";
 192                         clock-output-names = "pcie20_phy1_pipe_clk";
 193
 194                         resets = <&gcc GCC_PCIE1_PHY_BCR>,
 195                                 <&gcc GCC_PCIE1PHY_PHY_BCR>;
 196                         reset-names = "phy",
 197                                       "common";
 198                         status = "disabled";
 199                 };
 200
 201                 tlmm: pinctrl@1000000 {
 202                         compatible = "qcom,ipq8074-pinctrl";
 203                         reg = <0x01000000 0x300000>;
 204                         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 205                         gpio-controller;
 206                         gpio-ranges = <&tlmm 0 0 70>;
 207                         #gpio-cells = <0x2>;
 208                         interrupt-controller;
 209                         #interrupt-cells = <0x2>;
 210
 211                         serial_4_pins: serial4-pinmux {
 212                                 pins = "gpio23", "gpio24";
 213                                 function = "blsp4_uart1";
 214                                 drive-strength = <8>;
 215                                 bias-disable;
 216                         };
 217
 218                         i2c_0_pins: i2c-0-pinmux {
 219                                 pins = "gpio42", "gpio43";
 220                                 function = "blsp1_i2c";
 221                                 drive-strength = <8>;
 222                                 bias-disable;
 223                         };
 224
 225                         spi_0_pins: spi-0-pins {
 226                                 pins = "gpio38", "gpio39", "gpio40", "gpio41";
 227                                 function = "blsp0_spi";
 228                                 drive-strength = <8>;
 229                                 bias-disable;
 230                         };
 231
 232                         hsuart_pins: hsuart-pins {
 233                                 pins = "gpio46", "gpio47", "gpio48", "gpio49";
 234                                 function = "blsp2_uart";
 235                                 drive-strength = <8>;
 236                                 bias-disable;
 237                         };
 238
 239                         qpic_pins: qpic-pins {
 240                                 pins = "gpio1", "gpio3", "gpio4",
 241                                        "gpio5", "gpio6", "gpio7",
 242                                        "gpio8", "gpio10", "gpio11",
 243                                        "gpio12", "gpio13", "gpio14",
 244                                        "gpio15", "gpio16", "gpio17";
 245                                 function = "qpic";
 246                                 drive-strength = <8>;
 247                                 bias-disable;
 248                         };
 249                 };
 250
 251                 gcc: gcc@1800000 {
 252                         compatible = "qcom,gcc-ipq8074";
 253                         reg = <0x01800000 0x80000>;
 254                         #clock-cells = <0x1>;
 255                         #reset-cells = <0x1>;
 256                 };
 257
 258                 sdhc_1: sdhci@7824900 {
 259                         compatible = "qcom,sdhci-msm-v4";
 260                         reg = <0x7824900 0x500>, <0x7824000 0x800>;
 261                         reg-names = "hc_mem", "core_mem";
 262
 263                         interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
 264                                      <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 265                         interrupt-names = "hc_irq", "pwr_irq";
 266
 267                         clocks = <&xo>,
 268                                  <&gcc GCC_SDCC1_AHB_CLK>,
 269                                  <&gcc GCC_SDCC1_APPS_CLK>;
 270                         clock-names = "xo", "iface", "core";
 271                         max-frequency = <384000000>;
 272                         mmc-ddr-1_8v;
 273                         mmc-hs200-1_8v;
 274                         mmc-hs400-1_8v;
 275                         bus-width = <8>;
 276
 277                         status = "disabled";
 278                 };
 279
 280                 blsp_dma: dma-controller@7884000 {
 281                         compatible = "qcom,bam-v1.7.0";
 282                         reg = <0x07884000 0x2b000>;
 283                         interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
 284                         clocks = <&gcc GCC_BLSP1_AHB_CLK>;
 285                         clock-names = "bam_clk";
 286                         #dma-cells = <1>;
 287                         qcom,ee = <0>;
 288                 };
 289
 290                 blsp1_uart1: serial@78af000 {
 291                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 292                         reg = <0x078af000 0x200>;
 293                         interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 294                         clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
 295                                  <&gcc GCC_BLSP1_AHB_CLK>;
 296                         clock-names = "core", "iface";
 297                         status = "disabled";
 298                 };
 299
 300                 blsp1_uart3: serial@78b1000 {
 301                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 302                         reg = <0x078b1000 0x200>;
 303                         interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
 304                         clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
 305                                 <&gcc GCC_BLSP1_AHB_CLK>;
 306                         clock-names = "core", "iface";
 307                         dmas = <&blsp_dma 4>,
 308                                 <&blsp_dma 5>;
 309                         dma-names = "tx", "rx";
 310                         pinctrl-0 = <&hsuart_pins>;
 311                         pinctrl-names = "default";
 312                         status = "disabled";
 313                 };
 314
 315                 blsp1_uart5: serial@78b3000 {
 316                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 317                         reg = <0x078b3000 0x200>;
 318                         interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
 319                         clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
 320                                  <&gcc GCC_BLSP1_AHB_CLK>;
 321                         clock-names = "core", "iface";
 322                         pinctrl-0 = <&serial_4_pins>;
 323                         pinctrl-names = "default";
 324                         status = "disabled";
 325                 };
 326
 327                 blsp1_spi1: spi@78b5000 {
 328                         compatible = "qcom,spi-qup-v2.2.1";
 329                         #address-cells = <1>;
 330                         #size-cells = <0>;
 331                         reg = <0x078b5000 0x600>;
 332                         interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 333                         spi-max-frequency = <50000000>;
 334                         clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
 335                                 <&gcc GCC_BLSP1_AHB_CLK>;
 336                         clock-names = "core", "iface";
 337                         dmas = <&blsp_dma 12>, <&blsp_dma 13>;
 338                         dma-names = "tx", "rx";
 339                         pinctrl-0 = <&spi_0_pins>;
 340                         pinctrl-names = "default";
 341                         status = "disabled";
 342                 };
 343
 344                 blsp1_i2c2: i2c@78b6000 {
 345                         compatible = "qcom,i2c-qup-v2.2.1";
 346                         #address-cells = <1>;
 347                         #size-cells = <0>;
 348                         reg = <0x078b6000 0x600>;
 349                         interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 350                         clocks = <&gcc GCC_BLSP1_AHB_CLK>,
 351                                 <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
 352                         clock-names = "iface", "core";
 353                         clock-frequency = <400000>;
 354                         dmas = <&blsp_dma 15>, <&blsp_dma 14>;
 355                         dma-names = "rx", "tx";
 356                         pinctrl-0 = <&i2c_0_pins>;
 357                         pinctrl-names = "default";
 358                         status = "disabled";
 359                 };
 360
 361                 blsp1_i2c3: i2c@78b7000 {
 362                         compatible = "qcom,i2c-qup-v2.2.1";
 363                         #address-cells = <1>;
 364                         #size-cells = <0>;
 365                         reg = <0x078b7000 0x600>;
 366                         interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 367                         clocks = <&gcc GCC_BLSP1_AHB_CLK>,
 368                                 <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
 369                         clock-names = "iface", "core";
 370                         clock-frequency = <100000>;
 371                         dmas = <&blsp_dma 17>, <&blsp_dma 16>;
 372                         dma-names = "rx", "tx";
 373                         status = "disabled";
 374                 };
 375
 376                 blsp1_i2c6: i2c@78ba000 {
 377                         compatible = "qcom,i2c-qup-v2.2.1";
 378                         #address-cells = <1>;
 379                         #size-cells = <0>;
 380                         reg = <0x078ba000 0x600>;
 381                         interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
 382                         clocks = <&gcc GCC_BLSP1_AHB_CLK>,
 383                                  <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
 384                         clock-names = "iface", "core";
 385                         clock-frequency = <100000>;
 386                         dmas = <&blsp_dma 23>, <&blsp_dma 22>;
 387                         dma-names = "rx", "tx";
 388                         status = "disabled";
 389                 };
 390
 391                 qpic_bam: dma-controller@7984000 {
 392                         compatible = "qcom,bam-v1.7.0";
 393                         reg = <0x07984000 0x1a000>;
 394                         interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 395                         clocks = <&gcc GCC_QPIC_AHB_CLK>;
 396                         clock-names = "bam_clk";
 397                         #dma-cells = <1>;
 398                         qcom,ee = <0>;
 399                         status = "disabled";
 400                 };
 401
 402                 qpic_nand: nand@79b0000 {
 403                         compatible = "qcom,ipq8074-nand";
 404                         reg = <0x079b0000 0x10000>;
 405                         #address-cells = <1>;
 406                         #size-cells = <0>;
 407                         clocks = <&gcc GCC_QPIC_CLK>,
 408                                  <&gcc GCC_QPIC_AHB_CLK>;
 409                         clock-names = "core", "aon";
 410
 411                         dmas = <&qpic_bam 0>,
 412                                <&qpic_bam 1>,
 413                                <&qpic_bam 2>;
 414                         dma-names = "tx", "rx", "cmd";
 415                         pinctrl-0 = <&qpic_pins>;
 416                         pinctrl-names = "default";
 417                         status = "disabled";
 418                 };
 419
 420                 usb_0: usb@8af8800 {
 421                         compatible = "qcom,dwc3";
 422                         reg = <0x08af8800 0x400>;
 423                         #address-cells = <1>;
 424                         #size-cells = <1>;
 425                         ranges;
 426
 427                         clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
 428                                 <&gcc GCC_USB0_MASTER_CLK>,
 429                                 <&gcc GCC_USB0_SLEEP_CLK>,
 430                                 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
 431                         clock-names = "sys_noc_axi",
 432                                 "master",
 433                                 "sleep",
 434                                 "mock_utmi";
 435
 436                         assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
 437                                           <&gcc GCC_USB0_MASTER_CLK>,
 438                                           <&gcc GCC_USB0_MOCK_UTMI_CLK>;
 439                         assigned-clock-rates = <133330000>,
 440                                                 <133330000>,
 441                                                 <19200000>;
 442
 443                         resets = <&gcc GCC_USB0_BCR>;
 444                         status = "disabled";
 445
 446                         dwc_0: dwc3@8a00000 {
 447                                 compatible = "snps,dwc3";
 448                                 reg = <0x8a00000 0xcd00>;
 449                                 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 450                                 phys = <&qusb_phy_0>, <&usb0_ssphy>;
 451                                 phy-names = "usb2-phy", "usb3-phy";
 452                                 tx-fifo-resize;
 453                                 snps,is-utmi-l1-suspend;
 454                                 snps,hird-threshold = /bits/ 8 <0x0>;
 455                                 snps,dis_u2_susphy_quirk;
 456                                 snps,dis_u3_susphy_quirk;
 457                                 dr_mode = "host";
 458                         };
 459                 };
 460
 461                 usb_1: usb@8cf8800 {
 462                         compatible = "qcom,dwc3";
 463                         reg = <0x08cf8800 0x400>;
 464                         #address-cells = <1>;
 465                         #size-cells = <1>;
 466                         ranges;
 467
 468                         clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
 469                                 <&gcc GCC_USB1_MASTER_CLK>,
 470                                 <&gcc GCC_USB1_SLEEP_CLK>,
 471                                 <&gcc GCC_USB1_MOCK_UTMI_CLK>;
 472                         clock-names = "sys_noc_axi",
 473                                 "master",
 474                                 "sleep",
 475                                 "mock_utmi";
 476
 477                         assigned-clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
 478                                           <&gcc GCC_USB1_MASTER_CLK>,
 479                                           <&gcc GCC_USB1_MOCK_UTMI_CLK>;
 480                         assigned-clock-rates = <133330000>,
 481                                                 <133330000>,
 482                                                 <19200000>;
 483
 484                         resets = <&gcc GCC_USB1_BCR>;
 485                         status = "disabled";
 486
 487                         dwc_1: dwc3@8c00000 {
 488                                 compatible = "snps,dwc3";
 489                                 reg = <0x8c00000 0xcd00>;
 490                                 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 491                                 phys = <&qusb_phy_1>, <&usb1_ssphy>;
 492                                 phy-names = "usb2-phy", "usb3-phy";
 493                                 tx-fifo-resize;
 494                                 snps,is-utmi-l1-suspend;
 495                                 snps,hird-threshold = /bits/ 8 <0x0>;
 496                                 snps,dis_u2_susphy_quirk;
 497                                 snps,dis_u3_susphy_quirk;
 498                                 dr_mode = "host";
 499                         };
 500                 };
 501
 502                 intc: interrupt-controller@b000000 {
 503                         compatible = "qcom,msm-qgic2";
 504                         interrupt-controller;
 505                         #interrupt-cells = <0x3>;
 506                         reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
 507                 };
 508
 509                 timer {
 510                         compatible = "arm,armv8-timer";
 511                         interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 512                                      <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 513                                      <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 514                                      <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 515                 };
 516
 517                 watchdog: watchdog@b017000 {
 518                         compatible = "qcom,kpss-wdt";
 519                         reg = <0xb017000 0x1000>;
 520                         interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
 521                         clocks = <&sleep_clk>;
 522                         timeout-sec = <30>;
 523                 };
 524
 525                 timer@b120000 {
 526                         #address-cells = <1>;
 527                         #size-cells = <1>;
 528                         ranges;
 529                         compatible = "arm,armv7-timer-mem";
 530                         reg = <0x0b120000 0x1000>;
 531                         clock-frequency = <19200000>;
 532
 533                         frame@b120000 {
 534                                 frame-number = <0>;
 535                                 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
 536                                              <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 537                                 reg = <0x0b121000 0x1000>,
 538                                       <0x0b122000 0x1000>;
 539                         };
 540
 541                         frame@b123000 {
 542                                 frame-number = <1>;
 543                                 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 544                                 reg = <0x0b123000 0x1000>;
 545                                 status = "disabled";
 546                         };
 547
 548                         frame@b124000 {
 549                                 frame-number = <2>;
 550                                 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 551                                 reg = <0x0b124000 0x1000>;
 552                                 status = "disabled";
 553                         };
 554
 555                         frame@b125000 {
 556                                 frame-number = <3>;
 557                                 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 558                                 reg = <0x0b125000 0x1000>;
 559                                 status = "disabled";
 560                         };
 561
 562                         frame@b126000 {
 563                                 frame-number = <4>;
 564                                 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 565                                 reg = <0x0b126000 0x1000>;
 566                                 status = "disabled";
 567                         };
 568
 569                         frame@b127000 {
 570                                 frame-number = <5>;
 571                                 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 572                                 reg = <0x0b127000 0x1000>;
 573                                 status = "disabled";
 574                         };
 575
 576                         frame@b128000 {
 577                                 frame-number = <6>;
 578                                 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 579                                 reg = <0x0b128000 0x1000>;
 580                                 status = "disabled";
 581                         };
 582                 };
 583
 584                 pcie1: pci@10000000 {
 585                         compatible = "qcom,pcie-ipq8074";
 586                         reg =  <0x10000000 0xf1d
 587                                 0x10000f20 0xa8
 588                                 0x00088000 0x2000
 589                                 0x10100000 0x1000>;
 590                         reg-names = "dbi", "elbi", "parf", "config";
 591                         device_type = "pci";
 592                         linux,pci-domain = <1>;
 593                         bus-range = <0x00 0xff>;
 594                         num-lanes = <1>;
 595                         #address-cells = <3>;
 596                         #size-cells = <2>;
 597
 598                         phys = <&pcie_phy1>;
 599                         phy-names = "pciephy";
 600
 601                         ranges = <0x81000000 0 0x10200000 0x10200000
 602                                   0 0x100000   /* downstream I/O */
 603                                   0x82000000 0 0x10300000 0x10300000
 604                                   0 0xd00000>; /* non-prefetchable memory */
 605
 606                         interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 607                         interrupt-names = "msi";
 608                         #interrupt-cells = <1>;
 609                         interrupt-map-mask = <0 0 0 0x7>;
 610                         interrupt-map = <0 0 0 1 &intc 0 142
 611                                          IRQ_TYPE_LEVEL_HIGH>, /* int_a */
 612                                         <0 0 0 2 &intc 0 143
 613                                          IRQ_TYPE_LEVEL_HIGH>, /* int_b */
 614                                         <0 0 0 3 &intc 0 144
 615                                          IRQ_TYPE_LEVEL_HIGH>, /* int_c */
 616                                         <0 0 0 4 &intc 0 145
 617                                          IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 618
 619                         clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
 620                                  <&gcc GCC_PCIE1_AXI_M_CLK>,
 621                                  <&gcc GCC_PCIE1_AXI_S_CLK>,
 622                                  <&gcc GCC_PCIE1_AHB_CLK>,
 623                                  <&gcc GCC_PCIE1_AUX_CLK>;
 624                         clock-names = "iface",
 625                                       "axi_m",
 626                                       "axi_s",
 627                                       "ahb",
 628                                       "aux";
 629                         resets = <&gcc GCC_PCIE1_PIPE_ARES>,
 630                                  <&gcc GCC_PCIE1_SLEEP_ARES>,
 631                                  <&gcc GCC_PCIE1_CORE_STICKY_ARES>,
 632                                  <&gcc GCC_PCIE1_AXI_MASTER_ARES>,
 633                                  <&gcc GCC_PCIE1_AXI_SLAVE_ARES>,
 634                                  <&gcc GCC_PCIE1_AHB_ARES>,
 635                                  <&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>;
 636                         reset-names = "pipe",
 637                                       "sleep",
 638                                       "sticky",
 639                                       "axi_m",
 640                                       "axi_s",
 641                                       "ahb",
 642                                       "axi_m_sticky";
 643                         status = "disabled";
 644                 };
 645
 646                 pcie0: pci@20000000 {
 647                         compatible = "qcom,pcie-ipq8074";
 648                         reg =  <0x20000000 0xf1d
 649                                 0x20000f20 0xa8
 650                                 0x00080000 0x2000
 651                                 0x20100000 0x1000>;
 652                         reg-names = "dbi", "elbi", "parf", "config";
 653                         device_type = "pci";
 654                         linux,pci-domain = <0>;
 655                         bus-range = <0x00 0xff>;
 656                         num-lanes = <1>;
 657                         #address-cells = <3>;
 658                         #size-cells = <2>;
 659
 660                         phys = <&pcie_phy0>;
 661                         phy-names = "pciephy";
 662
 663                         ranges = <0x81000000 0 0x20200000 0x20200000
 664                                   0 0x100000   /* downstream I/O */
 665                                   0x82000000 0 0x20300000 0x20300000
 666                                   0 0xd00000>; /* non-prefetchable memory */
 667
 668                         interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 669                         interrupt-names = "msi";
 670                         #interrupt-cells = <1>;
 671                         interrupt-map-mask = <0 0 0 0x7>;
 672                         interrupt-map = <0 0 0 1 &intc 0 75
 673                                          IRQ_TYPE_LEVEL_HIGH>, /* int_a */
 674                                         <0 0 0 2 &intc 0 78
 675                                          IRQ_TYPE_LEVEL_HIGH>, /* int_b */
 676                                         <0 0 0 3 &intc 0 79
 677                                          IRQ_TYPE_LEVEL_HIGH>, /* int_c */
 678                                         <0 0 0 4 &intc 0 83
 679                                          IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 680
 681                         clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
 682                                  <&gcc GCC_PCIE0_AXI_M_CLK>,
 683                                  <&gcc GCC_PCIE0_AXI_S_CLK>,
 684                                  <&gcc GCC_PCIE0_AHB_CLK>,
 685                                  <&gcc GCC_PCIE0_AUX_CLK>;
 686
 687                         clock-names = "iface",
 688                                       "axi_m",
 689                                       "axi_s",
 690                                       "ahb",
 691                                       "aux";
 692                         resets = <&gcc GCC_PCIE0_PIPE_ARES>,
 693                                  <&gcc GCC_PCIE0_SLEEP_ARES>,
 694                                  <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
 695                                  <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
 696                                  <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
 697                                  <&gcc GCC_PCIE0_AHB_ARES>,
 698                                  <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>;
 699                         reset-names = "pipe",
 700                                       "sleep",
 701                                       "sticky",
 702                                       "axi_m",
 703                                       "axi_s",
 704                                       "ahb",
 705                                       "axi_m_sticky";
 706                         status = "disabled";
 707                 };
 708         };
 709 };