arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (C) 2018 SolidRun ltd.
   4  * Based on Marvell MACCHIATOBin board
   5  *
   6  * Device Tree file for SolidRun's ClearFog GT 8K
   7  */
   8
   9 #include "armada-8040.dtsi"
  10
  11 #include <dt-bindings/input/input.h>
  12 #include <dt-bindings/gpio/gpio.h>
  13
  14 / {
  15         model = "SolidRun ClearFog GT 8K";
  16         compatible = "solidrun,clearfog-gt-8k", "marvell,armada8040",
  17                         "marvell,armada-ap806-quad", "marvell,armada-ap806";
  18
  19         chosen {
  20                 stdout-path = "serial0:115200n8";
  21         };
  22
  23         memory@0 {
  24                 device_type = "memory";
  25                 reg = <0x0 0x0 0x0 0x80000000>;
  26         };
  27
  28         aliases {
  29                 ethernet0 = &cp1_eth1;
  30                 ethernet1 = &cp0_eth0;
  31                 ethernet2 = &cp1_eth2;
  32         };
  33
  34         fan: pwm {
  35                 compatible = "pwm-fan";
  36                 /* 20% steps */
  37                 cooling-levels = <0 51 102 153 204 255>;
  38                 #cooling-cells = <2>;
  39                 pinctrl-names = "default";
  40                 pinctrl-0 = <&cp0_fan_pwm_pins>;
  41                 pwms = <&cp0_gpio2 16 40000>;
  42         };
  43
  44         v_3_3: regulator-3-3v {
  45                 compatible = "regulator-fixed";
  46                 regulator-name = "v_3_3";
  47                 regulator-min-microvolt = <3300000>;
  48                 regulator-max-microvolt = <3300000>;
  49                 regulator-always-on;
  50                 status = "okay";
  51         };
  52
  53         v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
  54                 compatible = "regulator-fixed";
  55                 gpio = <&cp0_gpio2 15 GPIO_ACTIVE_LOW>;
  56                 pinctrl-names = "default";
  57                 pinctrl-0 = <&cp0_xhci_vbus_pins>;
  58                 regulator-name = "v_5v0_usb3_hst_vbus";
  59                 regulator-min-microvolt = <5000000>;
  60                 regulator-max-microvolt = <5000000>;
  61                 status = "okay";
  62         };
  63
  64         sfp_cp0_eth0: sfp-cp0-eth0 {
  65                 compatible = "sff,sfp";
  66                 i2c-bus = <&cp0_i2c1>;
  67                 mod-def0-gpio = <&cp0_gpio2 17 GPIO_ACTIVE_LOW>;
  68                 tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
  69                 pinctrl-names = "default";
  70                 pinctrl-0 = <&cp0_sfp_present_pins &cp1_sfp_tx_disable_pins>;
  71                 maximum-power-milliwatt = <2000>;
  72         };
  73
  74         leds {
  75                 compatible = "gpio-leds";
  76                 pinctrl-0 = <&cp0_led0_pins
  77                              &cp0_led1_pins>;
  78                 pinctrl-names = "default";
  79                 /* No designated function for these LEDs at the moment */
  80                 led0 {
  81                         label = "clearfog-gt-8k:green:led0";
  82                         gpios = <&cp0_gpio2 8 GPIO_ACTIVE_LOW>;
  83                         default-state = "on";
  84                 };
  85                 led1 {
  86                         label = "clearfog-gt-8k:green:led1";
  87                         gpios = <&cp0_gpio2 9 GPIO_ACTIVE_LOW>;
  88                         default-state = "on";
  89                 };
  90         };
  91
  92         keys {
  93                 compatible = "gpio-keys";
  94                 pinctrl-0 = <&cp0_gpio_reset_pins &cp1_wps_button_pins>;
  95                 pinctrl-names = "default";
  96
  97                 button_0 {
  98                         /* The rear button */
  99                         label = "Rear Button";
 100                         gpios = <&cp0_gpio2 7 GPIO_ACTIVE_LOW>;
 101                         linux,can-disable;
 102                         linux,code = <BTN_0>;
 103                 };
 104
 105                 button_1 {
 106                         /* The wps button */
 107                         label = "WPS Button";
 108                         gpios = <&cp1_gpio1 30 GPIO_ACTIVE_LOW>;
 109                         linux,can-disable;
 110                         linux,code = <KEY_WPS_BUTTON>;
 111                 };
 112         };
 113 };
 114
 115 &ap_thermal_ic {
 116         polling-delay = <1000>; /* milliseconds */
 117         trips {
 118                 ap_active: trip-active {
 119                         temperature = <40000>; /* millicelsius */
 120                         hysteresis = <4000>; /* millicelsius */
 121                         type = "active";
 122                 };
 123         };
 124         cooling-maps {
 125                 map0 {
 126                         trip = <&ap_active>;
 127                         cooling-device = <&fan THERMAL_NO_LIMIT 4>;
 128                 };
 129                 map1 {
 130                         trip = <&ap_crit>;
 131                         cooling-device = <&fan 4 5>;
 132                 };
 133         };
 134 };
 135
 136 &cp0_thermal_ic {
 137         polling-delay = <1000>; /* milliseconds */
 138         trips {
 139                 cp0_active0: trip-active0 {
 140                         temperature = <40000>; /* millicelsius */
 141                         hysteresis = <2500>; /* millicelsius */
 142                         type = "active";
 143                 };
 144                 cp0_active1: trip-active1 {
 145                         temperature = <45000>; /* millicelsius */
 146                         hysteresis = <2500>; /* millicelsius */
 147                         type = "active";
 148                 };
 149                 cp0_active2: trip-active2 {
 150                         temperature = <50000>; /* millicelsius */
 151                         hysteresis = <2500>; /* millicelsius */
 152                         type = "active";
 153                 };
 154                 cp0_active3: trip-active3 {
 155                         temperature = <60000>; /* millicelsius */
 156                         hysteresis = <2500>; /* millicelsius */
 157                         type = "active";
 158                 };
 159         };
 160         cooling-maps {
 161                 map0 {
 162                         trip = <&cp0_active0>;
 163                         cooling-device = <&fan 0 1>;
 164                 };
 165                 map1 {
 166                         trip = <&cp0_active1>;
 167                         cooling-device = <&fan 1 2>;
 168                 };
 169                 map2 {
 170                         trip = <&cp0_active2>;
 171                         cooling-device = <&fan 2 3>;
 172                 };
 173                 map3 {
 174                         trip = <&cp0_active3>;
 175                         cooling-device = <&fan 3 4>;
 176                 };
 177                 map4 {
 178                         trip = <&cp0_crit>;
 179                         cooling-device = <&fan 4 5>;
 180                 };
 181         };
 182 };
 183
 184 &cp1_thermal_ic {
 185         polling-delay = <1000>; /* milliseconds */
 186         trips {
 187                 cp1_active0: trip-active0 {
 188                         temperature = <40000>; /* millicelsius */
 189                         hysteresis = <2500>; /* millicelsius */
 190                         type = "active";
 191                 };
 192                 cp1_active1: trip-active1 {
 193                         temperature = <45000>; /* millicelsius */
 194                         hysteresis = <2500>; /* millicelsius */
 195                         type = "active";
 196                 };
 197                 cp1_active2: trip-active2 {
 198                         temperature = <50000>; /* millicelsius */
 199                         hysteresis = <2500>; /* millicelsius */
 200                         type = "active";
 201                 };
 202                 cp1_active3: trip-active3 {
 203                         temperature = <60000>; /* millicelsius */
 204                         hysteresis = <2500>; /* millicelsius */
 205                         type = "active";
 206                 };
 207         };
 208         cooling-maps {
 209                 map0 {
 210                         trip = <&cp1_active0>;
 211                         cooling-device = <&fan 0 1>;
 212                 };
 213                 map1 {
 214                         trip = <&cp1_active1>;
 215                         cooling-device = <&fan 1 2>;
 216                 };
 217                 map2 {
 218                         trip = <&cp1_active2>;
 219                         cooling-device = <&fan 2 3>;
 220                 };
 221                 map3 {
 222                         trip = <&cp1_active3>;
 223                         cooling-device = <&fan 3 4>;
 224                 };
 225                 map4 {
 226                         trip = <&cp1_crit>;
 227                         cooling-device = <&fan 4 5>;
 228                 };
 229         };
 230 };
 231
 232 &uart0 {
 233         status = "okay";
 234         pinctrl-0 = <&uart0_pins>;
 235         pinctrl-names = "default";
 236 };
 237
 238 &ap_sdhci0 {
 239         bus-width = <8>;
 240         no-1-8-v;
 241         no-sd;
 242         no-sdio;
 243         non-removable;
 244         status = "okay";
 245         vqmmc-supply = <&v_3_3>;
 246 };
 247
 248 &cp0_i2c0 {
 249         clock-frequency = <100000>;
 250         pinctrl-names = "default";
 251         pinctrl-0 = <&cp0_i2c0_pins>;
 252         status = "okay";
 253 };
 254
 255 &cp0_i2c1 {
 256         clock-frequency = <100000>;
 257         pinctrl-names = "default";
 258         pinctrl-0 = <&cp0_i2c1_pins>;
 259         status = "okay";
 260 };
 261
 262 &cp0_pinctrl {
 263         /*
 264          * MPP Bus:
 265          * [0-31] = 0xff: Keep default CP0_shared_pins:
 266          * [11] CLKOUT_MPP_11 (out)
 267          * [23] LINK_RD_IN_CP2CP (in)
 268          * [25] CLKOUT_MPP_25 (out)
 269          * [29] AVS_FB_IN_CP2CP (in)
 270          * [32, 33, 34] pci0/1/2 reset
 271          * [35-38] CP0 I2C1 and I2C0
 272          * [39] GPIO reset button
 273          * [40,41] LED0 and LED1
 274          * [43] 1512 phy reset
 275          * [47] USB VBUS EN (active low)
 276          * [48] FAN PWM
 277          * [49] SFP+ present signal
 278          * [50] TPM interrupt
 279          * [51] WLAN0 disable
 280          * [52] WLAN1 disable
 281          * [53] LTE disable
 282          * [54] NFC reset
 283          * [55] Micro SD card detect
 284          * [56-61] Micro SD
 285          */
 286
 287         cp0_pci0_reset_pins: pci0-reset-pins {
 288                 marvell,pins = "mpp32";
 289                 marvell,function = "gpio";
 290         };
 291
 292         cp0_pci1_reset_pins: pci1-reset-pins {
 293                 marvell,pins = "mpp33";
 294                 marvell,function = "gpio";
 295         };
 296
 297         cp0_pci2_reset_pins: pci2-reset-pins {
 298                 marvell,pins = "mpp34";
 299                 marvell,function = "gpio";
 300         };
 301
 302         cp0_i2c1_pins: i2c1-pins {
 303                 marvell,pins = "mpp35", "mpp36";
 304                 marvell,function = "i2c1";
 305         };
 306
 307         cp0_i2c0_pins: i2c0-pins {
 308                 marvell,pins = "mpp37", "mpp38";
 309                 marvell,function = "i2c0";
 310         };
 311
 312         cp0_gpio_reset_pins: gpio-reset-pins {
 313                 marvell,pins = "mpp39";
 314                 marvell,function = "gpio";
 315         };
 316
 317         cp0_led0_pins: led0-pins {
 318                 marvell,pins = "mpp40";
 319                 marvell,function = "gpio";
 320         };
 321
 322         cp0_led1_pins: led1-pins {
 323                 marvell,pins = "mpp41";
 324                 marvell,function = "gpio";
 325         };
 326
 327         cp0_copper_eth_phy_reset: copper-eth-phy-reset {
 328                 marvell,pins = "mpp43";
 329                 marvell,function = "gpio";
 330         };
 331
 332         cp0_xhci_vbus_pins: xhci0-vbus-pins {
 333                 marvell,pins = "mpp47";
 334                 marvell,function = "gpio";
 335         };
 336
 337         cp0_fan_pwm_pins: fan-pwm-pins {
 338                 marvell,pins = "mpp48";
 339                 marvell,function = "gpio";
 340         };
 341
 342         cp0_sfp_present_pins: sfp-present-pins {
 343                 marvell,pins = "mpp49";
 344                 marvell,function = "gpio";
 345         };
 346
 347         cp0_tpm_irq_pins: tpm-irq-pins {
 348                 marvell,pins = "mpp50";
 349                 marvell,function = "gpio";
 350         };
 351
 352         cp0_wlan_disable_pins: wlan-disable-pins {
 353                 marvell,pins = "mpp51";
 354                 marvell,function = "gpio";
 355         };
 356
 357         cp0_sdhci_pins: sdhci-pins {
 358                 marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
 359                                "mpp60", "mpp61";
 360                 marvell,function = "sdio";
 361         };
 362 };
 363
 364 &cp0_pcie0 {
 365         pinctrl-names = "default";
 366         pinctrl-0 = <&cp0_pci0_reset_pins &cp0_wlan_disable_pins>;
 367         reset-gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>;
 368         phys = <&cp0_comphy0 0>;
 369         phy-names = "cp0-pcie0-x1-phy";
 370         status = "okay";
 371 };
 372
 373 &cp0_gpio2 {
 374         sata_reset {
 375                 gpio-hog;
 376                 gpios = <1 GPIO_ACTIVE_HIGH>;
 377                 output-high;
 378         };
 379
 380         lte_reset {
 381                 gpio-hog;
 382                 gpios = <2 GPIO_ACTIVE_LOW>;
 383                 output-low;
 384         };
 385
 386         wlan_disable {
 387                 gpio-hog;
 388                 gpios = <19 GPIO_ACTIVE_LOW>;
 389                 output-low;
 390         };
 391
 392         lte_disable {
 393                 gpio-hog;
 394                 gpios = <21 GPIO_ACTIVE_LOW>;
 395                 output-low;
 396         };
 397 };
 398
 399 &cp0_ethernet {
 400         status = "okay";
 401 };
 402
 403 /* SFP */
 404 &cp0_eth0 {
 405         status = "okay";
 406         phy-mode = "10gbase-r";
 407         managed = "in-band-status";
 408         phys = <&cp0_comphy2 0>;
 409         sfp = <&sfp_cp0_eth0>;
 410 };
 411
 412 &cp0_sdhci0 {
 413         broken-cd;
 414         bus-width = <4>;
 415         pinctrl-names = "default";
 416         pinctrl-0 = <&cp0_sdhci_pins>;
 417         status = "okay";
 418         vqmmc-supply = <&v_3_3>;
 419 };
 420
 421 &cp0_usb3_1 {
 422         status = "okay";
 423 };
 424
 425 &cp1_pinctrl {
 426         /*
 427          * MPP Bus:
 428          * [0-5] TDM
 429          * [6]   VHV Enable
 430          * [7]   CP1 SPI0 CSn1 (FXS)
 431          * [8]   CP1 SPI0 CSn0 (TPM)
 432          * [9.11]CP1 SPI0 MOSI/MISO/CLK
 433          * [13]  CP1 SPI1 MISO (TDM and SPI ROM shared)
 434          * [14]  CP1 SPI1 CS0n (64Mb SPI ROM)
 435          * [15]  CP1 SPI1 MOSI (TDM and SPI ROM shared)
 436          * [16]  CP1 SPI1 CLK (TDM and SPI ROM shared)
 437          * [24]  Topaz switch reset
 438          * [26]  Buzzer
 439          * [27]  CP1 SMI MDIO
 440          * [28]  CP1 SMI MDC
 441          * [29]  CP0 10G SFP TX Disable
 442          * [30]  WPS button
 443          * [31]  Front panel button
 444          */
 445
 446         cp1_spi1_pins: spi1-pins {
 447                 marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
 448                 marvell,function = "spi1";
 449         };
 450
 451         cp1_switch_reset_pins: switch-reset-pins {
 452                 marvell,pins = "mpp24";
 453                 marvell,function = "gpio";
 454         };
 455
 456         cp1_ge_mdio_pins: ge-mdio-pins {
 457                 marvell,pins = "mpp27", "mpp28";
 458                 marvell,function = "ge";
 459         };
 460
 461         cp1_sfp_tx_disable_pins: sfp-tx-disable-pins {
 462                 marvell,pins = "mpp29";
 463                 marvell,function = "gpio";
 464         };
 465
 466         cp1_wps_button_pins: wps-button-pins {
 467                 marvell,pins = "mpp30";
 468                 marvell,function = "gpio";
 469         };
 470 };
 471
 472 &cp1_sata0 {
 473         pinctrl-0 = <&cp0_pci1_reset_pins>;
 474         status = "okay";
 475
 476         sata-port@1 {
 477                 phys = <&cp1_comphy0 1>;
 478                 phy-names = "cp1-sata0-1-phy";
 479         };
 480 };
 481
 482 &cp1_mdio {
 483         pinctrl-names = "default";
 484         pinctrl-0 = <&cp1_ge_mdio_pins>;
 485         status = "okay";
 486
 487         ge_phy: ethernet-phy@0 {
 488                 /* LED0 - GB link
 489                  * LED1 - on: link, blink: activity
 490                  */
 491                 marvell,reg-init = <3 16 0 0x1017>;
 492                 reg = <0>;
 493                 pinctrl-names = "default";
 494                 pinctrl-0 = <&cp0_copper_eth_phy_reset>;
 495                 reset-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>;
 496                 reset-assert-us = <10000>;
 497                 reset-deassert-us = <10000>;
 498         };
 499
 500         switch0: switch0@4 {
 501                 compatible = "marvell,mv88e6085";
 502                 reg = <4>;
 503                 pinctrl-names = "default";
 504                 pinctrl-0 = <&cp1_switch_reset_pins>;
 505                 reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>;
 506
 507                 ports {
 508                         #address-cells = <1>;
 509                         #size-cells = <0>;
 510
 511                         port@1 {
 512                                 reg = <1>;
 513                                 label = "lan2";
 514                                 phy-handle = <&switch0phy0>;
 515                         };
 516
 517                         port@2 {
 518                                 reg = <2>;
 519                                 label = "lan1";
 520                                 phy-handle = <&switch0phy1>;
 521                         };
 522
 523                         port@3 {
 524                                 reg = <3>;
 525                                 label = "lan4";
 526                                 phy-handle = <&switch0phy2>;
 527                         };
 528
 529                         port@4 {
 530                                 reg = <4>;
 531                                 label = "lan3";
 532                                 phy-handle = <&switch0phy3>;
 533                         };
 534
 535                         port@5 {
 536                                 reg = <5>;
 537                                 label = "cpu";
 538                                 ethernet = <&cp1_eth2>;
 539                                 phy-mode = "2500base-x";
 540                                 managed = "in-band-status";
 541                         };
 542                 };
 543
 544                 mdio {
 545                         #address-cells = <1>;
 546                         #size-cells = <0>;
 547
 548                         switch0phy0: switch0phy0@11 {
 549                                 reg = <0x11>;
 550                         };
 551
 552                         switch0phy1: switch0phy1@12 {
 553                                 reg = <0x12>;
 554                         };
 555
 556                         switch0phy2: switch0phy2@13 {
 557                                 reg = <0x13>;
 558                         };
 559
 560                         switch0phy3: switch0phy3@14 {
 561                                 reg = <0x14>;
 562                         };
 563                 };
 564         };
 565 };
 566
 567 &cp1_ethernet {
 568         status = "okay";
 569 };
 570
 571 /* 1G copper */
 572 &cp1_eth1 {
 573         status = "okay";
 574         phy-mode = "sgmii";
 575         phy = <&ge_phy>;
 576         phys = <&cp1_comphy3 1>;
 577 };
 578
 579 /* Switch uplink */
 580 &cp1_eth2 {
 581         status = "okay";
 582         phy-mode = "2500base-x";
 583         phys = <&cp1_comphy5 2>;
 584         managed = "in-band-status";
 585 };
 586
 587 &cp1_spi1 {
 588         pinctrl-names = "default";
 589         pinctrl-0 = <&cp1_spi1_pins>;
 590         status = "okay";
 591
 592         spi-flash@0 {
 593                 compatible = "st,w25q32";
 594                 spi-max-frequency = <50000000>;
 595                 reg = <0>;
 596         };
 597 };
 598
 599 &cp1_comphy2 {
 600         cp1_usbh0_con: connector {
 601                 compatible = "usb-a-connector";
 602                 phy-supply = <&v_5v0_usb3_hst_vbus>;
 603         };
 604 };
 605
 606 &cp1_usb3_0 {
 607         phys = <&cp1_comphy2 0>;
 608         phy-names = "cp1-usb3h0-comphy";
 609         status = "okay";
 610 };