arch/arm64/boot/dts/freescale/imx8mm.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright 2019 NXP
   4  */
   5
   6 #include <dt-bindings/clock/imx8mm-clock.h>
   7 #include <dt-bindings/gpio/gpio.h>
   8 #include <dt-bindings/input/input.h>
   9 #include <dt-bindings/interrupt-controller/arm-gic.h>
  10 #include <dt-bindings/thermal/thermal.h>
  11
  12 #include "imx8mm-pinfunc.h"
  13
  14 / {
  15         interrupt-parent = <&gic>;
  16         #address-cells = <2>;
  17         #size-cells = <2>;
  18
  19         aliases {
  20                 ethernet0 = &fec1;
  21                 gpio0 = &gpio1;
  22                 gpio1 = &gpio2;
  23                 gpio2 = &gpio3;
  24                 gpio3 = &gpio4;
  25                 gpio4 = &gpio5;
  26                 i2c0 = &i2c1;
  27                 i2c1 = &i2c2;
  28                 i2c2 = &i2c3;
  29                 i2c3 = &i2c4;
  30                 mmc0 = &usdhc1;
  31                 mmc1 = &usdhc2;
  32                 mmc2 = &usdhc3;
  33                 serial0 = &uart1;
  34                 serial1 = &uart2;
  35                 serial2 = &uart3;
  36                 serial3 = &uart4;
  37                 spi0 = &ecspi1;
  38                 spi1 = &ecspi2;
  39                 spi2 = &ecspi3;
  40         };
  41
  42         cpus {
  43                 #address-cells = <1>;
  44                 #size-cells = <0>;
  45
  46                 idle-states {
  47                         entry-method = "psci";
  48
  49                         cpu_pd_wait: cpu-pd-wait {
  50                                 compatible = "arm,idle-state";
  51                                 arm,psci-suspend-param = <0x0010033>;
  52                                 local-timer-stop;
  53                                 entry-latency-us = <1000>;
  54                                 exit-latency-us = <700>;
  55                                 min-residency-us = <2700>;
  56                         };
  57                 };
  58
  59                 A53_0: cpu@0 {
  60                         device_type = "cpu";
  61                         compatible = "arm,cortex-a53";
  62                         reg = <0x0>;
  63                         clock-latency = <61036>; /* two CLK32 periods */
  64                         clocks = <&clk IMX8MM_CLK_ARM>;
  65                         enable-method = "psci";
  66                         next-level-cache = <&A53_L2>;
  67                         operating-points-v2 = <&a53_opp_table>;
  68                         nvmem-cells = <&cpu_speed_grade>;
  69                         nvmem-cell-names = "speed_grade";
  70                         cpu-idle-states = <&cpu_pd_wait>;
  71                         #cooling-cells = <2>;
  72                 };
  73
  74                 A53_1: cpu@1 {
  75                         device_type = "cpu";
  76                         compatible = "arm,cortex-a53";
  77                         reg = <0x1>;
  78                         clock-latency = <61036>; /* two CLK32 periods */
  79                         clocks = <&clk IMX8MM_CLK_ARM>;
  80                         enable-method = "psci";
  81                         next-level-cache = <&A53_L2>;
  82                         operating-points-v2 = <&a53_opp_table>;
  83                         cpu-idle-states = <&cpu_pd_wait>;
  84                         #cooling-cells = <2>;
  85                 };
  86
  87                 A53_2: cpu@2 {
  88                         device_type = "cpu";
  89                         compatible = "arm,cortex-a53";
  90                         reg = <0x2>;
  91                         clock-latency = <61036>; /* two CLK32 periods */
  92                         clocks = <&clk IMX8MM_CLK_ARM>;
  93                         enable-method = "psci";
  94                         next-level-cache = <&A53_L2>;
  95                         operating-points-v2 = <&a53_opp_table>;
  96                         cpu-idle-states = <&cpu_pd_wait>;
  97                         #cooling-cells = <2>;
  98                 };
  99
 100                 A53_3: cpu@3 {
 101                         device_type = "cpu";
 102                         compatible = "arm,cortex-a53";
 103                         reg = <0x3>;
 104                         clock-latency = <61036>; /* two CLK32 periods */
 105                         clocks = <&clk IMX8MM_CLK_ARM>;
 106                         enable-method = "psci";
 107                         next-level-cache = <&A53_L2>;
 108                         operating-points-v2 = <&a53_opp_table>;
 109                         cpu-idle-states = <&cpu_pd_wait>;
 110                         #cooling-cells = <2>;
 111                 };
 112
 113                 A53_L2: l2-cache0 {
 114                         compatible = "cache";
 115                 };
 116         };
 117
 118         a53_opp_table: opp-table {
 119                 compatible = "operating-points-v2";
 120                 opp-shared;
 121
 122                 opp-1200000000 {
 123                         opp-hz = /bits/ 64 <1200000000>;
 124                         opp-microvolt = <850000>;
 125                         opp-supported-hw = <0xe>, <0x7>;
 126                         clock-latency-ns = <150000>;
 127                         opp-suspend;
 128                 };
 129
 130                 opp-1600000000 {
 131                         opp-hz = /bits/ 64 <1600000000>;
 132                         opp-microvolt = <950000>;
 133                         opp-supported-hw = <0xc>, <0x7>;
 134                         clock-latency-ns = <150000>;
 135                         opp-suspend;
 136                 };
 137
 138                 opp-1800000000 {
 139                         opp-hz = /bits/ 64 <1800000000>;
 140                         opp-microvolt = <1000000>;
 141                         opp-supported-hw = <0x8>, <0x3>;
 142                         clock-latency-ns = <150000>;
 143                         opp-suspend;
 144                 };
 145         };
 146
 147         osc_32k: clock-osc-32k {
 148                 compatible = "fixed-clock";
 149                 #clock-cells = <0>;
 150                 clock-frequency = <32768>;
 151                 clock-output-names = "osc_32k";
 152         };
 153
 154         osc_24m: clock-osc-24m {
 155                 compatible = "fixed-clock";
 156                 #clock-cells = <0>;
 157                 clock-frequency = <24000000>;
 158                 clock-output-names = "osc_24m";
 159         };
 160
 161         clk_ext1: clock-ext1 {
 162                 compatible = "fixed-clock";
 163                 #clock-cells = <0>;
 164                 clock-frequency = <133000000>;
 165                 clock-output-names = "clk_ext1";
 166         };
 167
 168         clk_ext2: clock-ext2 {
 169                 compatible = "fixed-clock";
 170                 #clock-cells = <0>;
 171                 clock-frequency = <133000000>;
 172                 clock-output-names = "clk_ext2";
 173         };
 174
 175         clk_ext3: clock-ext3 {
 176                 compatible = "fixed-clock";
 177                 #clock-cells = <0>;
 178                 clock-frequency = <133000000>;
 179                 clock-output-names = "clk_ext3";
 180         };
 181
 182         clk_ext4: clock-ext4 {
 183                 compatible = "fixed-clock";
 184                 #clock-cells = <0>;
 185                 clock-frequency= <133000000>;
 186                 clock-output-names = "clk_ext4";
 187         };
 188
 189         psci {
 190                 compatible = "arm,psci-1.0";
 191                 method = "smc";
 192         };
 193
 194         pmu {
 195                 compatible = "arm,armv8-pmuv3";
 196                 interrupts = <GIC_PPI 7
 197                              (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 198                 interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>;
 199         };
 200
 201         timer {
 202                 compatible = "arm,armv8-timer";
 203                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */
 204                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */
 205                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */
 206                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */
 207                 clock-frequency = <8000000>;
 208                 arm,no-tick-in-suspend;
 209         };
 210
 211         thermal-zones {
 212                 cpu-thermal {
 213                         polling-delay-passive = <250>;
 214                         polling-delay = <2000>;
 215                         thermal-sensors = <&tmu>;
 216                         trips {
 217                                 cpu_alert0: trip0 {
 218                                         temperature = <85000>;
 219                                         hysteresis = <2000>;
 220                                         type = "passive";
 221                                 };
 222
 223                                 cpu_crit0: trip1 {
 224                                         temperature = <95000>;
 225                                         hysteresis = <2000>;
 226                                         type = "critical";
 227                                 };
 228                         };
 229
 230                         cooling-maps {
 231                                 map0 {
 232                                         trip = <&cpu_alert0>;
 233                                         cooling-device =
 234                                                 <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 235                                                 <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 236                                                 <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 237                                                 <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 238                                 };
 239                         };
 240                 };
 241         };
 242
 243         usbphynop1: usbphynop1 {
 244                 compatible = "usb-nop-xceiv";
 245                 clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
 246                 assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
 247                 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
 248                 clock-names = "main_clk";
 249         };
 250
 251         usbphynop2: usbphynop2 {
 252                 compatible = "usb-nop-xceiv";
 253                 clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
 254                 assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
 255                 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
 256                 clock-names = "main_clk";
 257         };
 258
 259         soc@0 {
 260                 compatible = "fsl,imx8mm-soc", "simple-bus";
 261                 #address-cells = <1>;
 262                 #size-cells = <1>;
 263                 ranges = <0x0 0x0 0x0 0x3e000000>;
 264                 dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
 265                 nvmem-cells = <&imx8mm_uid>;
 266                 nvmem-cell-names = "soc_unique_id";
 267
 268                 aips1: bus@30000000 {
 269                         compatible = "fsl,aips-bus", "simple-bus";
 270                         reg = <0x30000000 0x400000>;
 271                         #address-cells = <1>;
 272                         #size-cells = <1>;
 273                         ranges = <0x30000000 0x30000000 0x400000>;
 274
 275                         spba2: spba-bus@30000000 {
 276                                 compatible = "fsl,spba-bus", "simple-bus";
 277                                 #address-cells = <1>;
 278                                 #size-cells = <1>;
 279                                 reg = <0x30000000 0x100000>;
 280                                 ranges;
 281
 282                                 sai1: sai@30010000 {
 283                                         #sound-dai-cells = <0>;
 284                                         compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
 285                                         reg = <0x30010000 0x10000>;
 286                                         interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 287                                         clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
 288                                                  <&clk IMX8MM_CLK_SAI1_ROOT>,
 289                                                  <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
 290                                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
 291                                         dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
 292                                         dma-names = "rx", "tx";
 293                                         status = "disabled";
 294                                 };
 295
 296                                 sai2: sai@30020000 {
 297                                         #sound-dai-cells = <0>;
 298                                         compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
 299                                         reg = <0x30020000 0x10000>;
 300                                         interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 301                                         clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
 302                                                 <&clk IMX8MM_CLK_SAI2_ROOT>,
 303                                                 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
 304                                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
 305                                         dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
 306                                         dma-names = "rx", "tx";
 307                                         status = "disabled";
 308                                 };
 309
 310                                 sai3: sai@30030000 {
 311                                         #sound-dai-cells = <0>;
 312                                         compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
 313                                         reg = <0x30030000 0x10000>;
 314                                         interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 315                                         clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
 316                                                  <&clk IMX8MM_CLK_SAI3_ROOT>,
 317                                                  <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
 318                                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
 319                                         dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
 320                                         dma-names = "rx", "tx";
 321                                         status = "disabled";
 322                                 };
 323
 324                                 sai5: sai@30050000 {
 325                                         #sound-dai-cells = <0>;
 326                                         compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
 327                                         reg = <0x30050000 0x10000>;
 328                                         interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 329                                         clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
 330                                                  <&clk IMX8MM_CLK_SAI5_ROOT>,
 331                                                  <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
 332                                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
 333                                         dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
 334                                         dma-names = "rx", "tx";
 335                                         status = "disabled";
 336                                 };
 337
 338                                 sai6: sai@30060000 {
 339                                         #sound-dai-cells = <0>;
 340                                         compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
 341                                         reg = <0x30060000 0x10000>;
 342                                         interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 343                                         clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
 344                                                  <&clk IMX8MM_CLK_SAI6_ROOT>,
 345                                                  <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
 346                                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
 347                                         dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
 348                                         dma-names = "rx", "tx";
 349                                         status = "disabled";
 350                                 };
 351
 352                                 micfil: audio-controller@30080000 {
 353                                         compatible = "fsl,imx8mm-micfil";
 354                                         reg = <0x30080000 0x10000>;
 355                                         interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
 356                                                      <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
 357                                                      <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
 358                                                      <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 359                                         clocks = <&clk IMX8MM_CLK_PDM_IPG>,
 360                                                  <&clk IMX8MM_CLK_PDM_ROOT>,
 361                                                  <&clk IMX8MM_AUDIO_PLL1_OUT>,
 362                                                  <&clk IMX8MM_AUDIO_PLL2_OUT>,
 363                                                  <&clk IMX8MM_CLK_EXT3>;
 364                                         clock-names = "ipg_clk", "ipg_clk_app",
 365                                                       "pll8k", "pll11k", "clkext3";
 366                                         dmas = <&sdma2 24 25 0x80000000>;
 367                                         dma-names = "rx";
 368                                         status = "disabled";
 369                                 };
 370
 371                                 spdif1: spdif@30090000 {
 372                                         compatible = "fsl,imx35-spdif";
 373                                         reg = <0x30090000 0x10000>;
 374                                         interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 375                                         clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */
 376                                                  <&clk IMX8MM_CLK_24M>, /* rxtx0 */
 377                                                  <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */
 378                                                  <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */
 379                                                  <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */
 380                                                  <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */
 381                                                  <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */
 382                                                  <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */
 383                                                  <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */
 384                                                  <&clk IMX8MM_CLK_DUMMY>; /* spba */
 385                                         clock-names = "core", "rxtx0",
 386                                                       "rxtx1", "rxtx2",
 387                                                       "rxtx3", "rxtx4",
 388                                                       "rxtx5", "rxtx6",
 389                                                       "rxtx7", "spba";
 390                                         dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
 391                                         dma-names = "rx", "tx";
 392                                         status = "disabled";
 393                                 };
 394                         };
 395
 396                         gpio1: gpio@30200000 {
 397                                 compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
 398                                 reg = <0x30200000 0x10000>;
 399                                 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
 400                                              <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 401                                 clocks = <&clk IMX8MM_CLK_GPIO1_ROOT>;
 402                                 gpio-controller;
 403                                 #gpio-cells = <2>;
 404                                 interrupt-controller;
 405                                 #interrupt-cells = <2>;
 406                                 gpio-ranges = <&iomuxc 0 10 30>;
 407                         };
 408
 409                         gpio2: gpio@30210000 {
 410                                 compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
 411                                 reg = <0x30210000 0x10000>;
 412                                 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
 413                                              <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 414                                 clocks = <&clk IMX8MM_CLK_GPIO2_ROOT>;
 415                                 gpio-controller;
 416                                 #gpio-cells = <2>;
 417                                 interrupt-controller;
 418                                 #interrupt-cells = <2>;
 419                                 gpio-ranges = <&iomuxc 0 40 21>;
 420                         };
 421
 422                         gpio3: gpio@30220000 {
 423                                 compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
 424                                 reg = <0x30220000 0x10000>;
 425                                 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 426                                              <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 427                                 clocks = <&clk IMX8MM_CLK_GPIO3_ROOT>;
 428                                 gpio-controller;
 429                                 #gpio-cells = <2>;
 430                                 interrupt-controller;
 431                                 #interrupt-cells = <2>;
 432                                 gpio-ranges = <&iomuxc 0 61 26>;
 433                         };
 434
 435                         gpio4: gpio@30230000 {
 436                                 compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
 437                                 reg = <0x30230000 0x10000>;
 438                                 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 439                                              <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 440                                 clocks = <&clk IMX8MM_CLK_GPIO4_ROOT>;
 441                                 gpio-controller;
 442                                 #gpio-cells = <2>;
 443                                 interrupt-controller;
 444                                 #interrupt-cells = <2>;
 445                                 gpio-ranges = <&iomuxc 0 87 32>;
 446                         };
 447
 448                         gpio5: gpio@30240000 {
 449                                 compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
 450                                 reg = <0x30240000 0x10000>;
 451                                 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 452                                              <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 453                                 clocks = <&clk IMX8MM_CLK_GPIO5_ROOT>;
 454                                 gpio-controller;
 455                                 #gpio-cells = <2>;
 456                                 interrupt-controller;
 457                                 #interrupt-cells = <2>;
 458                                 gpio-ranges = <&iomuxc 0 119 30>;
 459                         };
 460
 461                         tmu: tmu@30260000 {
 462                                 compatible = "fsl,imx8mm-tmu";
 463                                 reg = <0x30260000 0x10000>;
 464                                 clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
 465                                 #thermal-sensor-cells = <0>;
 466                         };
 467
 468                         wdog1: watchdog@30280000 {
 469                                 compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
 470                                 reg = <0x30280000 0x10000>;
 471                                 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 472                                 clocks = <&clk IMX8MM_CLK_WDOG1_ROOT>;
 473                                 status = "disabled";
 474                         };
 475
 476                         wdog2: watchdog@30290000 {
 477                                 compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
 478                                 reg = <0x30290000 0x10000>;
 479                                 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 480                                 clocks = <&clk IMX8MM_CLK_WDOG2_ROOT>;
 481                                 status = "disabled";
 482                         };
 483
 484                         wdog3: watchdog@302a0000 {
 485                                 compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
 486                                 reg = <0x302a0000 0x10000>;
 487                                 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 488                                 clocks = <&clk IMX8MM_CLK_WDOG3_ROOT>;
 489                                 status = "disabled";
 490                         };
 491
 492                         sdma2: dma-controller@302c0000 {
 493                                 compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 494                                 reg = <0x302c0000 0x10000>;
 495                                 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 496                                 clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>,
 497                                          <&clk IMX8MM_CLK_SDMA2_ROOT>;
 498                                 clock-names = "ipg", "ahb";
 499                                 #dma-cells = <3>;
 500                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
 501                         };
 502
 503                         sdma3: dma-controller@302b0000 {
 504                                 compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 505                                 reg = <0x302b0000 0x10000>;
 506                                 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 507                                 clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>,
 508                                  <&clk IMX8MM_CLK_SDMA3_ROOT>;
 509                                 clock-names = "ipg", "ahb";
 510                                 #dma-cells = <3>;
 511                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
 512                         };
 513
 514                         iomuxc: pinctrl@30330000 {
 515                                 compatible = "fsl,imx8mm-iomuxc";
 516                                 reg = <0x30330000 0x10000>;
 517                         };
 518
 519                         gpr: iomuxc-gpr@30340000 {
 520                                 compatible = "fsl,imx8mm-iomuxc-gpr", "syscon";
 521                                 reg = <0x30340000 0x10000>;
 522                         };
 523
 524                         ocotp: efuse@30350000 {
 525                                 compatible = "fsl,imx8mm-ocotp", "syscon";
 526                                 reg = <0x30350000 0x10000>;
 527                                 clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>;
 528                                 /* For nvmem subnodes */
 529                                 #address-cells = <1>;
 530                                 #size-cells = <1>;
 531
 532                                 imx8mm_uid: unique-id@410 {
 533                                         reg = <0x4 0x8>;
 534                                 };
 535
 536                                 cpu_speed_grade: speed-grade@10 {
 537                                         reg = <0x10 4>;
 538                                 };
 539
 540                                 fec_mac_address: mac-address@90 {
 541                                         reg = <0x90 6>;
 542                                 };
 543                         };
 544
 545                         anatop: anatop@30360000 {
 546                                 compatible = "fsl,imx8mm-anatop", "syscon";
 547                                 reg = <0x30360000 0x10000>;
 548                         };
 549
 550                         snvs: snvs@30370000 {
 551                                 compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
 552                                 reg = <0x30370000 0x10000>;
 553
 554                                 snvs_rtc: snvs-rtc-lp {
 555                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 556                                         regmap = <&snvs>;
 557                                         offset = <0x34>;
 558                                         interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 559                                                      <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 560                                         clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
 561                                         clock-names = "snvs-rtc";
 562                                 };
 563
 564                                 snvs_pwrkey: snvs-powerkey {
 565                                         compatible = "fsl,sec-v4.0-pwrkey";
 566                                         regmap = <&snvs>;
 567                                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 568                                         clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
 569                                         clock-names = "snvs-pwrkey";
 570                                         linux,keycode = <KEY_POWER>;
 571                                         wakeup-source;
 572                                         status = "disabled";
 573                                 };
 574                         };
 575
 576                         clk: clock-controller@30380000 {
 577                                 compatible = "fsl,imx8mm-ccm";
 578                                 reg = <0x30380000 0x10000>;
 579                                 #clock-cells = <1>;
 580                                 clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
 581                                          <&clk_ext3>, <&clk_ext4>;
 582                                 clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
 583                                               "clk_ext3", "clk_ext4";
 584                                 assigned-clocks = <&clk IMX8MM_CLK_A53_SRC>,
 585                                                 <&clk IMX8MM_CLK_A53_CORE>,
 586                                                 <&clk IMX8MM_CLK_NOC>,
 587                                                 <&clk IMX8MM_CLK_AUDIO_AHB>,
 588                                                 <&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
 589                                                 <&clk IMX8MM_SYS_PLL3>,
 590                                                 <&clk IMX8MM_VIDEO_PLL1>,
 591                                                 <&clk IMX8MM_AUDIO_PLL1>,
 592                                                 <&clk IMX8MM_AUDIO_PLL2>;
 593                                 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
 594                                                          <&clk IMX8MM_ARM_PLL_OUT>,
 595                                                          <&clk IMX8MM_SYS_PLL3_OUT>,
 596                                                          <&clk IMX8MM_SYS_PLL1_800M>;
 597                                 assigned-clock-rates = <0>, <0>, <0>,
 598                                                         <400000000>,
 599                                                         <400000000>,
 600                                                         <750000000>,
 601                                                         <594000000>,
 602                                                         <393216000>,
 603                                                         <361267200>;
 604                         };
 605
 606                         src: reset-controller@30390000 {
 607                                 compatible = "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon";
 608                                 reg = <0x30390000 0x10000>;
 609                                 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 610                                 #reset-cells = <1>;
 611                         };
 612                 };
 613
 614                 aips2: bus@30400000 {
 615                         compatible = "fsl,aips-bus", "simple-bus";
 616                         reg = <0x30400000 0x400000>;
 617                         #address-cells = <1>;
 618                         #size-cells = <1>;
 619                         ranges = <0x30400000 0x30400000 0x400000>;
 620
 621                         pwm1: pwm@30660000 {
 622                                 compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
 623                                 reg = <0x30660000 0x10000>;
 624                                 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 625                                 clocks = <&clk IMX8MM_CLK_PWM1_ROOT>,
 626                                         <&clk IMX8MM_CLK_PWM1_ROOT>;
 627                                 clock-names = "ipg", "per";
 628                                 #pwm-cells = <2>;
 629                                 status = "disabled";
 630                         };
 631
 632                         pwm2: pwm@30670000 {
 633                                 compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
 634                                 reg = <0x30670000 0x10000>;
 635                                 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 636                                 clocks = <&clk IMX8MM_CLK_PWM2_ROOT>,
 637                                          <&clk IMX8MM_CLK_PWM2_ROOT>;
 638                                 clock-names = "ipg", "per";
 639                                 #pwm-cells = <2>;
 640                                 status = "disabled";
 641                         };
 642
 643                         pwm3: pwm@30680000 {
 644                                 compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
 645                                 reg = <0x30680000 0x10000>;
 646                                 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 647                                 clocks = <&clk IMX8MM_CLK_PWM3_ROOT>,
 648                                          <&clk IMX8MM_CLK_PWM3_ROOT>;
 649                                 clock-names = "ipg", "per";
 650                                 #pwm-cells = <2>;
 651                                 status = "disabled";
 652                         };
 653
 654                         pwm4: pwm@30690000 {
 655                                 compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
 656                                 reg = <0x30690000 0x10000>;
 657                                 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 658                                 clocks = <&clk IMX8MM_CLK_PWM4_ROOT>,
 659                                          <&clk IMX8MM_CLK_PWM4_ROOT>;
 660                                 clock-names = "ipg", "per";
 661                                 #pwm-cells = <2>;
 662                                 status = "disabled";
 663                         };
 664
 665                         system_counter: timer@306a0000 {
 666                                 compatible = "nxp,sysctr-timer";
 667                                 reg = <0x306a0000 0x20000>;
 668                                 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 669                                 clocks = <&osc_24m>;
 670                                 clock-names = "per";
 671                         };
 672                 };
 673
 674                 aips3: bus@30800000 {
 675                         compatible = "fsl,aips-bus", "simple-bus";
 676                         reg = <0x30800000 0x400000>;
 677                         #address-cells = <1>;
 678                         #size-cells = <1>;
 679                         ranges = <0x30800000 0x30800000 0x400000>,
 680                                  <0x8000000 0x8000000 0x10000000>;
 681
 682                         spba1: spba-bus@30800000 {
 683                                 compatible = "fsl,spba-bus", "simple-bus";
 684                                 #address-cells = <1>;
 685                                 #size-cells = <1>;
 686                                 reg = <0x30800000 0x100000>;
 687                                 ranges;
 688
 689                                 ecspi1: spi@30820000 {
 690                                         compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
 691                                         #address-cells = <1>;
 692                                         #size-cells = <0>;
 693                                         reg = <0x30820000 0x10000>;
 694                                         interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 695                                         clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>,
 696                                                  <&clk IMX8MM_CLK_ECSPI1_ROOT>;
 697                                         clock-names = "ipg", "per";
 698                                         dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
 699                                         dma-names = "rx", "tx";
 700                                         status = "disabled";
 701                                 };
 702
 703                                 ecspi2: spi@30830000 {
 704                                         compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
 705                                         #address-cells = <1>;
 706                                         #size-cells = <0>;
 707                                         reg = <0x30830000 0x10000>;
 708                                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 709                                         clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>,
 710                                                  <&clk IMX8MM_CLK_ECSPI2_ROOT>;
 711                                         clock-names = "ipg", "per";
 712                                         dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
 713                                         dma-names = "rx", "tx";
 714                                         status = "disabled";
 715                                 };
 716
 717                                 ecspi3: spi@30840000 {
 718                                         compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
 719                                         #address-cells = <1>;
 720                                         #size-cells = <0>;
 721                                         reg = <0x30840000 0x10000>;
 722                                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 723                                         clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>,
 724                                                  <&clk IMX8MM_CLK_ECSPI3_ROOT>;
 725                                         clock-names = "ipg", "per";
 726                                         dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
 727                                         dma-names = "rx", "tx";
 728                                         status = "disabled";
 729                                 };
 730
 731                                 uart1: serial@30860000 {
 732                                         compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
 733                                         reg = <0x30860000 0x10000>;
 734                                         interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 735                                         clocks = <&clk IMX8MM_CLK_UART1_ROOT>,
 736                                                  <&clk IMX8MM_CLK_UART1_ROOT>;
 737                                         clock-names = "ipg", "per";
 738                                         dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
 739                                         dma-names = "rx", "tx";
 740                                         status = "disabled";
 741                                 };
 742
 743                                 uart3: serial@30880000 {
 744                                         compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
 745                                         reg = <0x30880000 0x10000>;
 746                                         interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 747                                         clocks = <&clk IMX8MM_CLK_UART3_ROOT>,
 748                                                  <&clk IMX8MM_CLK_UART3_ROOT>;
 749                                         clock-names = "ipg", "per";
 750                                         dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
 751                                         dma-names = "rx", "tx";
 752                                         status = "disabled";
 753                                 };
 754
 755                                 uart2: serial@30890000 {
 756                                         compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
 757                                         reg = <0x30890000 0x10000>;
 758                                         interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 759                                         clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
 760                                                  <&clk IMX8MM_CLK_UART2_ROOT>;
 761                                         clock-names = "ipg", "per";
 762                                         status = "disabled";
 763                                 };
 764                         };
 765
 766                         crypto: crypto@30900000 {
 767                                 compatible = "fsl,sec-v4.0";
 768                                 #address-cells = <1>;
 769                                 #size-cells = <1>;
 770                                 reg = <0x30900000 0x40000>;
 771                                 ranges = <0 0x30900000 0x40000>;
 772                                 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 773                                 clocks = <&clk IMX8MM_CLK_AHB>,
 774                                          <&clk IMX8MM_CLK_IPG_ROOT>;
 775                                 clock-names = "aclk", "ipg";
 776
 777                                 sec_jr0: jr@1000 {
 778                                         compatible = "fsl,sec-v4.0-job-ring";
 779                                         reg = <0x1000 0x1000>;
 780                                         interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 781                                 };
 782
 783                                 sec_jr1: jr@2000 {
 784                                         compatible = "fsl,sec-v4.0-job-ring";
 785                                         reg = <0x2000 0x1000>;
 786                                         interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 787                                 };
 788
 789                                 sec_jr2: jr@3000 {
 790                                         compatible = "fsl,sec-v4.0-job-ring";
 791                                         reg = <0x3000 0x1000>;
 792                                         interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 793                                 };
 794                         };
 795
 796                         i2c1: i2c@30a20000 {
 797                                 compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
 798                                 #address-cells = <1>;
 799                                 #size-cells = <0>;
 800                                 reg = <0x30a20000 0x10000>;
 801                                 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 802                                 clocks = <&clk IMX8MM_CLK_I2C1_ROOT>;
 803                                 status = "disabled";
 804                         };
 805
 806                         i2c2: i2c@30a30000 {
 807                                 compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
 808                                 #address-cells = <1>;
 809                                 #size-cells = <0>;
 810                                 reg = <0x30a30000 0x10000>;
 811                                 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 812                                 clocks = <&clk IMX8MM_CLK_I2C2_ROOT>;
 813                                 status = "disabled";
 814                         };
 815
 816                         i2c3: i2c@30a40000 {
 817                                 #address-cells = <1>;
 818                                 #size-cells = <0>;
 819                                 compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
 820                                 reg = <0x30a40000 0x10000>;
 821                                 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 822                                 clocks = <&clk IMX8MM_CLK_I2C3_ROOT>;
 823                                 status = "disabled";
 824                         };
 825
 826                         i2c4: i2c@30a50000 {
 827                                 compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
 828                                 #address-cells = <1>;
 829                                 #size-cells = <0>;
 830                                 reg = <0x30a50000 0x10000>;
 831                                 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 832                                 clocks = <&clk IMX8MM_CLK_I2C4_ROOT>;
 833                                 status = "disabled";
 834                         };
 835
 836                         uart4: serial@30a60000 {
 837                                 compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
 838                                 reg = <0x30a60000 0x10000>;
 839                                 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 840                                 clocks = <&clk IMX8MM_CLK_UART4_ROOT>,
 841                                          <&clk IMX8MM_CLK_UART4_ROOT>;
 842                                 clock-names = "ipg", "per";
 843                                 dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
 844                                 dma-names = "rx", "tx";
 845                                 status = "disabled";
 846                         };
 847
 848                         mu: mailbox@30aa0000 {
 849                                 compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu";
 850                                 reg = <0x30aa0000 0x10000>;
 851                                 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 852                                 clocks = <&clk IMX8MM_CLK_MU_ROOT>;
 853                                 #mbox-cells = <2>;
 854                         };
 855
 856                         usdhc1: mmc@30b40000 {
 857                                 compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 858                                 reg = <0x30b40000 0x10000>;
 859                                 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 860                                 clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
 861                                          <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
 862                                          <&clk IMX8MM_CLK_USDHC1_ROOT>;
 863                                 clock-names = "ipg", "ahb", "per";
 864                                 fsl,tuning-start-tap = <20>;
 865                                 fsl,tuning-step= <2>;
 866                                 bus-width = <4>;
 867                                 status = "disabled";
 868                         };
 869
 870                         usdhc2: mmc@30b50000 {
 871                                 compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 872                                 reg = <0x30b50000 0x10000>;
 873                                 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 874                                 clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
 875                                          <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
 876                                          <&clk IMX8MM_CLK_USDHC2_ROOT>;
 877                                 clock-names = "ipg", "ahb", "per";
 878                                 fsl,tuning-start-tap = <20>;
 879                                 fsl,tuning-step= <2>;
 880                                 bus-width = <4>;
 881                                 status = "disabled";
 882                         };
 883
 884                         usdhc3: mmc@30b60000 {
 885                                 compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 886                                 reg = <0x30b60000 0x10000>;
 887                                 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 888                                 clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
 889                                          <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
 890                                          <&clk IMX8MM_CLK_USDHC3_ROOT>;
 891                                 clock-names = "ipg", "ahb", "per";
 892                                 fsl,tuning-start-tap = <20>;
 893                                 fsl,tuning-step= <2>;
 894                                 bus-width = <4>;
 895                                 status = "disabled";
 896                         };
 897
 898                         flexspi: spi@30bb0000 {
 899                                 #address-cells = <1>;
 900                                 #size-cells = <0>;
 901                                 compatible = "nxp,imx8mm-fspi";
 902                                 reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
 903                                 reg-names = "fspi_base", "fspi_mmap";
 904                                 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 905                                 clocks = <&clk IMX8MM_CLK_QSPI_ROOT>,
 906                                          <&clk IMX8MM_CLK_QSPI_ROOT>;
 907                                 clock-names = "fspi_en", "fspi";
 908                                 status = "disabled";
 909                         };
 910
 911                         sdma1: dma-controller@30bd0000 {
 912                                 compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 913                                 reg = <0x30bd0000 0x10000>;
 914                                 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 915                                 clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
 916                                          <&clk IMX8MM_CLK_AHB>;
 917                                 clock-names = "ipg", "ahb";
 918                                 #dma-cells = <3>;
 919                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
 920                         };
 921
 922                         fec1: ethernet@30be0000 {
 923                                 compatible = "fsl,imx8mm-fec", "fsl,imx6sx-fec";
 924                                 reg = <0x30be0000 0x10000>;
 925                                 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
 926                                              <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
 927                                              <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
 928                                              <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 929                                 clocks = <&clk IMX8MM_CLK_ENET1_ROOT>,
 930                                          <&clk IMX8MM_CLK_ENET1_ROOT>,
 931                                          <&clk IMX8MM_CLK_ENET_TIMER>,
 932                                          <&clk IMX8MM_CLK_ENET_REF>,
 933                                          <&clk IMX8MM_CLK_ENET_PHY_REF>;
 934                                 clock-names = "ipg", "ahb", "ptp",
 935                                               "enet_clk_ref", "enet_out";
 936                                 assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>,
 937                                                   <&clk IMX8MM_CLK_ENET_TIMER>,
 938                                                   <&clk IMX8MM_CLK_ENET_REF>,
 939                                                   <&clk IMX8MM_CLK_ENET_PHY_REF>;
 940                                 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
 941                                                          <&clk IMX8MM_SYS_PLL2_100M>,
 942                                                          <&clk IMX8MM_SYS_PLL2_125M>,
 943                                                          <&clk IMX8MM_SYS_PLL2_50M>;
 944                                 assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
 945                                 fsl,num-tx-queues = <3>;
 946                                 fsl,num-rx-queues = <3>;
 947                                 nvmem-cells = <&fec_mac_address>;
 948                                 nvmem-cell-names = "mac-address";
 949                                 nvmem_macaddr_swap;
 950                                 fsl,stop-mode = <&gpr 0x10 3>;
 951                                 status = "disabled";
 952                         };
 953
 954                 };
 955
 956                 aips4: bus@32c00000 {
 957                         compatible = "fsl,aips-bus", "simple-bus";
 958                         reg = <0x32c00000 0x400000>;
 959                         #address-cells = <1>;
 960                         #size-cells = <1>;
 961                         ranges = <0x32c00000 0x32c00000 0x400000>;
 962
 963                         usbotg1: usb@32e40000 {
 964                                 compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
 965                                 reg = <0x32e40000 0x200>;
 966                                 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 967                                 clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
 968                                 clock-names = "usb1_ctrl_root_clk";
 969                                 assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
 970                                 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 971                                 fsl,usbphy = <&usbphynop1>;
 972                                 fsl,usbmisc = <&usbmisc1 0>;
 973                                 status = "disabled";
 974                         };
 975
 976                         usbmisc1: usbmisc@32e40200 {
 977                                 compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
 978                                 #index-cells = <1>;
 979                                 reg = <0x32e40200 0x200>;
 980                         };
 981
 982                         usbotg2: usb@32e50000 {
 983                                 compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
 984                                 reg = <0x32e50000 0x200>;
 985                                 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 986                                 clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
 987                                 clock-names = "usb1_ctrl_root_clk";
 988                                 assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
 989                                 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 990                                 fsl,usbphy = <&usbphynop2>;
 991                                 fsl,usbmisc = <&usbmisc2 0>;
 992                                 status = "disabled";
 993                         };
 994
 995                         usbmisc2: usbmisc@32e50200 {
 996                                 compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
 997                                 #index-cells = <1>;
 998                                 reg = <0x32e50200 0x200>;
 999                         };
1000
1001                 };
1002
1003                 dma_apbh: dma-controller@33000000 {
1004                         compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
1005                         reg = <0x33000000 0x2000>;
1006                         interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1007                                      <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1008                                      <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1009                                      <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
1010                         interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
1011                         #dma-cells = <1>;
1012                         dma-channels = <4>;
1013                         clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
1014                 };
1015
1016                 gpmi: nand-controller@33002000{
1017                         compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand";
1018                         #address-cells = <1>;
1019                         #size-cells = <1>;
1020                         reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
1021                         reg-names = "gpmi-nand", "bch";
1022                         interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
1023                         interrupt-names = "bch";
1024                         clocks = <&clk IMX8MM_CLK_NAND_ROOT>,
1025                                  <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
1026                         clock-names = "gpmi_io", "gpmi_bch_apb";
1027                         dmas = <&dma_apbh 0>;
1028                         dma-names = "rx-tx";
1029                         status = "disabled";
1030                 };
1031
1032                 gic: interrupt-controller@38800000 {
1033                         compatible = "arm,gic-v3";
1034                         reg = <0x38800000 0x10000>, /* GIC Dist */
1035                               <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */
1036                         #interrupt-cells = <3>;
1037                         interrupt-controller;
1038                         interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
1039                 };
1040
1041                 ddrc: memory-controller@3d400000 {
1042                         compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc";
1043                         reg = <0x3d400000 0x400000>;
1044                         clock-names = "core", "pll", "alt", "apb";
1045                         clocks = <&clk IMX8MM_CLK_DRAM_CORE>,
1046                                  <&clk IMX8MM_DRAM_PLL>,
1047                                  <&clk IMX8MM_CLK_DRAM_ALT>,
1048                                  <&clk IMX8MM_CLK_DRAM_APB>;
1049                 };
1050
1051                 ddr-pmu@3d800000 {
1052                         compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu";
1053                         reg = <0x3d800000 0x400000>;
1054                         interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
1055                 };
1056         };
1057 };