arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Device Tree file for NXP LS1028A RDB Board.
   4  *
   5  * Copyright 2018 NXP
   6  *
   7  * Harninder Rai <harninder.rai@nxp.com>
   8  *
   9  */
  10
  11 /dts-v1/;
  12 #include "fsl-ls1028a.dtsi"
  13
  14 / {
  15         model = "LS1028A RDB Board";
  16         compatible = "fsl,ls1028a-rdb", "fsl,ls1028a";
  17
  18         aliases {
  19                 crypto = &crypto;
  20                 serial0 = &duart0;
  21                 serial1 = &duart1;
  22                 mmc0 = &esdhc;
  23                 mmc1 = &esdhc1;
  24                 rtc1 = &ftm_alarm0;
  25         };
  26
  27         chosen {
  28                 stdout-path = "serial0:115200n8";
  29         };
  30
  31         memory@80000000 {
  32                 device_type = "memory";
  33                 reg = <0x0 0x80000000 0x1 0x0000000>;
  34         };
  35
  36         sys_mclk: clock-mclk {
  37                 compatible = "fixed-clock";
  38                 #clock-cells = <0>;
  39                 clock-frequency = <25000000>;
  40         };
  41
  42         reg_1p8v: regulator-1p8v {
  43                 compatible = "regulator-fixed";
  44                 regulator-name = "1P8V";
  45                 regulator-min-microvolt = <1800000>;
  46                 regulator-max-microvolt = <1800000>;
  47                 regulator-always-on;
  48         };
  49
  50         sb_3v3: regulator-sb3v3 {
  51                 compatible = "regulator-fixed";
  52                 regulator-name = "3v3_vbus";
  53                 regulator-min-microvolt = <3300000>;
  54                 regulator-max-microvolt = <3300000>;
  55                 regulator-boot-on;
  56                 regulator-always-on;
  57         };
  58
  59         sound {
  60                 compatible = "simple-audio-card";
  61                 simple-audio-card,format = "i2s";
  62                 simple-audio-card,widgets =
  63                         "Microphone", "Microphone Jack",
  64                         "Headphone", "Headphone Jack",
  65                         "Speaker", "Speaker Ext",
  66                         "Line", "Line In Jack";
  67                 simple-audio-card,routing =
  68                         "MIC_IN", "Microphone Jack",
  69                         "Microphone Jack", "Mic Bias",
  70                         "LINE_IN", "Line In Jack",
  71                         "Headphone Jack", "HP_OUT",
  72                         "Speaker Ext", "LINE_OUT";
  73
  74                 simple-audio-card,cpu {
  75                         sound-dai = <&sai4>;
  76                         frame-master;
  77                         bitclock-master;
  78                 };
  79
  80                 simple-audio-card,codec {
  81                         sound-dai = <&sgtl5000>;
  82                         frame-master;
  83                         bitclock-master;
  84                         system-clock-frequency = <25000000>;
  85                 };
  86         };
  87 };
  88
  89 &can0 {
  90         status = "okay";
  91
  92         can-transceiver {
  93                 max-bitrate = <5000000>;
  94         };
  95 };
  96
  97 &can1 {
  98         status = "okay";
  99
 100         can-transceiver {
 101                 max-bitrate = <5000000>;
 102         };
 103 };
 104
 105 &esdhc {
 106         sd-uhs-sdr104;
 107         sd-uhs-sdr50;
 108         sd-uhs-sdr25;
 109         sd-uhs-sdr12;
 110         status = "okay";
 111 };
 112
 113 &esdhc1 {
 114         mmc-hs200-1_8v;
 115         mmc-hs400-1_8v;
 116         bus-width = <8>;
 117         status = "okay";
 118 };
 119
 120 &fspi {
 121         status = "okay";
 122
 123         mt35xu02g0: flash@0 {
 124                 compatible = "jedec,spi-nor";
 125                 #address-cells = <1>;
 126                 #size-cells = <1>;
 127                 spi-max-frequency = <50000000>;
 128                 /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
 129                 spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
 130                 spi-tx-bus-width = <1>; /* 1 SPI Tx line */
 131                 reg = <0>;
 132         };
 133 };
 134
 135 &i2c0 {
 136         status = "okay";
 137
 138         i2c-mux@77 {
 139                 compatible = "nxp,pca9847";
 140                 reg = <0x77>;
 141                 #address-cells = <1>;
 142                 #size-cells = <0>;
 143
 144                 i2c@1 {
 145                         #address-cells = <1>;
 146                         #size-cells = <0>;
 147                         reg = <0x1>;
 148
 149                         sgtl5000: audio-codec@a {
 150                                 #sound-dai-cells = <0>;
 151                                 compatible = "fsl,sgtl5000";
 152                                 reg = <0xa>;
 153                                 VDDA-supply = <&reg_1p8v>;
 154                                 VDDIO-supply = <&reg_1p8v>;
 155                                 clocks = <&sys_mclk>;
 156                                 sclk-strength = <3>;
 157                         };
 158                 };
 159
 160                 i2c@2 {
 161                         #address-cells = <1>;
 162                         #size-cells = <0>;
 163                         reg = <0x02>;
 164
 165                         current-monitor@40 {
 166                                 compatible = "ti,ina220";
 167                                 reg = <0x40>;
 168                                 shunt-resistor = <500>;
 169                         };
 170                 };
 171
 172                 i2c@3 {
 173                         #address-cells = <1>;
 174                         #size-cells = <0>;
 175                         reg = <0x3>;
 176
 177                         temperature-sensor@4c {
 178                                 compatible = "nxp,sa56004";
 179                                 reg = <0x4c>;
 180                                 vcc-supply = <&sb_3v3>;
 181                         };
 182
 183                         rtc@51 {
 184                                 compatible = "nxp,pcf2129";
 185                                 reg = <0x51>;
 186                         };
 187                 };
 188         };
 189 };
 190
 191 &duart0 {
 192         status = "okay";
 193 };
 194
 195 &duart1 {
 196         status = "okay";
 197 };
 198
 199 &enetc_mdio_pf3 {
 200         /* VSC8514 QSGMII quad PHY */
 201         qsgmii_phy0: ethernet-phy@10 {
 202                 reg = <0x10>;
 203         };
 204
 205         qsgmii_phy1: ethernet-phy@11 {
 206                 reg = <0x11>;
 207         };
 208
 209         qsgmii_phy2: ethernet-phy@12 {
 210                 reg = <0x12>;
 211         };
 212
 213         qsgmii_phy3: ethernet-phy@13 {
 214                 reg = <0x13>;
 215         };
 216 };
 217
 218 &enetc_port0 {
 219         phy-handle = <&sgmii_phy0>;
 220         phy-connection-type = "sgmii";
 221         managed = "in-band-status";
 222         status = "okay";
 223
 224         mdio {
 225                 #address-cells = <1>;
 226                 #size-cells = <0>;
 227                 sgmii_phy0: ethernet-phy@2 {
 228                         reg = <0x2>;
 229                 };
 230         };
 231 };
 232
 233 &enetc_port2 {
 234         status = "okay";
 235 };
 236
 237 &mscc_felix {
 238         status = "okay";
 239 };
 240
 241 &mscc_felix_port0 {
 242         label = "swp0";
 243         managed = "in-band-status";
 244         phy-handle = <&qsgmii_phy0>;
 245         phy-mode = "qsgmii";
 246         status = "okay";
 247 };
 248
 249 &mscc_felix_port1 {
 250         label = "swp1";
 251         managed = "in-band-status";
 252         phy-handle = <&qsgmii_phy1>;
 253         phy-mode = "qsgmii";
 254         status = "okay";
 255 };
 256
 257 &mscc_felix_port2 {
 258         label = "swp2";
 259         managed = "in-band-status";
 260         phy-handle = <&qsgmii_phy2>;
 261         phy-mode = "qsgmii";
 262         status = "okay";
 263 };
 264
 265 &mscc_felix_port3 {
 266         label = "swp3";
 267         managed = "in-band-status";
 268         phy-handle = <&qsgmii_phy3>;
 269         phy-mode = "qsgmii";
 270         status = "okay";
 271 };
 272
 273 &mscc_felix_port4 {
 274         ethernet = <&enetc_port2>;
 275         status = "okay";
 276 };
 277
 278 &optee {
 279         status = "okay";
 280 };
 281
 282 &sai4 {
 283         status = "okay";
 284 };
 285
 286 &sata {
 287         status = "okay";
 288 };
 289
 290 &usb1 {
 291         dr_mode = "otg";
 292 };