arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 // Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
   3
   4 /dts-v1/;
   5
   6 #include "sun50i-h6.dtsi"
   7 #include "sun50i-h6-cpu-opp.dtsi"
   8
   9 #include <dt-bindings/gpio/gpio.h>
  10
  11 / {
  12         model = "Tanix TX6";
  13         compatible = "oranth,tanix-tx6", "allwinner,sun50i-h6";
  14
  15         aliases {
  16                 serial0 = &uart0;
  17         };
  18
  19         chosen {
  20                 stdout-path = "serial0:115200n8";
  21         };
  22
  23         connector {
  24                 compatible = "hdmi-connector";
  25                 ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
  26                 type = "a";
  27
  28                 port {
  29                         hdmi_con_in: endpoint {
  30                                 remote-endpoint = <&hdmi_out_con>;
  31                         };
  32                 };
  33         };
  34
  35         reg_vcc1v8: regulator-vcc1v8 {
  36                 compatible = "regulator-fixed";
  37                 regulator-name = "vcc1v8";
  38                 regulator-min-microvolt = <1800000>;
  39                 regulator-max-microvolt = <1800000>;
  40         };
  41
  42         reg_vcc3v3: regulator-vcc3v3 {
  43                 compatible = "regulator-fixed";
  44                 regulator-name = "vcc3v3";
  45                 regulator-min-microvolt = <3300000>;
  46                 regulator-max-microvolt = <3300000>;
  47         };
  48
  49         reg_vdd_cpu_gpu: regulator-vdd-cpu-gpu {
  50                 compatible = "regulator-fixed";
  51                 regulator-name = "vdd-cpu-gpu";
  52                 regulator-min-microvolt = <1135000>;
  53                 regulator-max-microvolt = <1135000>;
  54         };
  55 };
  56
  57 &cpu0 {
  58         cpu-supply = <&reg_vdd_cpu_gpu>;
  59 };
  60
  61 &de {
  62         status = "okay";
  63 };
  64
  65 &dwc3 {
  66         status = "okay";
  67 };
  68
  69 &ehci0 {
  70         status = "okay";
  71 };
  72
  73 &ehci3 {
  74         status = "okay";
  75 };
  76
  77 &gpu {
  78         mali-supply = <&reg_vdd_cpu_gpu>;
  79         status = "okay";
  80 };
  81
  82 &hdmi {
  83         status = "okay";
  84 };
  85
  86 &hdmi_out {
  87         hdmi_out_con: endpoint {
  88                 remote-endpoint = <&hdmi_con_in>;
  89         };
  90 };
  91
  92 &mmc0 {
  93         pinctrl-names = "default";
  94         pinctrl-0 = <&mmc0_pins>;
  95         vmmc-supply = <&reg_vcc3v3>;
  96         cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
  97         bus-width = <4>;
  98         status = "okay";
  99 };
 100
 101 &mmc2 {
 102         vmmc-supply = <&reg_vcc3v3>;
 103         vqmmc-supply = <&reg_vcc1v8>;
 104         bus-width = <8>;
 105         non-removable;
 106         cap-mmc-hw-reset;
 107         mmc-hs200-1_8v;
 108         status = "okay";
 109 };
 110
 111 &ohci0 {
 112         status = "okay";
 113 };
 114
 115 &ohci3 {
 116         status = "okay";
 117 };
 118
 119 &pio {
 120         vcc-pc-supply = <&reg_vcc1v8>;
 121         vcc-pd-supply = <&reg_vcc3v3>;
 122         vcc-pg-supply = <&reg_vcc1v8>;
 123 };
 124
 125 &r_ir {
 126         linux,rc-map-name = "rc-tanix-tx5max";
 127         status = "okay";
 128 };
 129
 130 &uart0 {
 131         pinctrl-names = "default";
 132         pinctrl-0 = <&uart0_ph_pins>;
 133         status = "okay";
 134 };
 135
 136 &usb2otg {
 137         dr_mode = "host";
 138         status = "okay";
 139 };
 140
 141 &usb2phy {
 142         status = "okay";
 143 };
 144
 145 &usb3phy {
 146         status = "okay";
 147 };