Merge branch 'work.gfs2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
[linux-2.6-microblaze.git] / arch / arm / mach-ep93xx / simone.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * arch/arm/mach-ep93xx/simone.c
4  * Simplemachines Sim.One support.
5  *
6  * Copyright (C) 2010 Ryan Mallon
7  *
8  * Based on the 2.6.24.7 support:
9  *   Copyright (C) 2009 Simplemachines
10  *   MMC support by Peter Ivanov <ivanovp@gmail.com>, 2007
11  */
12
13 #include <linux/kernel.h>
14 #include <linux/init.h>
15 #include <linux/platform_device.h>
16 #include <linux/i2c.h>
17 #include <linux/mmc/host.h>
18 #include <linux/spi/spi.h>
19 #include <linux/spi/mmc_spi.h>
20 #include <linux/platform_data/video-ep93xx.h>
21 #include <linux/platform_data/spi-ep93xx.h>
22 #include <linux/gpio.h>
23 #include <linux/gpio/machine.h>
24
25 #include "hardware.h"
26 #include "gpio-ep93xx.h"
27
28 #include <asm/mach-types.h>
29 #include <asm/mach/arch.h>
30
31 #include "soc.h"
32
33 static struct ep93xx_eth_data __initdata simone_eth_data = {
34         .phy_id         = 1,
35 };
36
37 static struct ep93xxfb_mach_info __initdata simone_fb_info = {
38         .flags          = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
39 };
40
41 static struct mmc_spi_platform_data simone_mmc_spi_data = {
42         .detect_delay   = 500,
43         .ocr_mask       = MMC_VDD_32_33 | MMC_VDD_33_34,
44 };
45
46 static struct gpiod_lookup_table simone_mmc_spi_gpio_table = {
47         .dev_id = "mmc_spi.0", /* "mmc_spi" @ CS0 */
48         .table = {
49                 /* Card detect */
50                 GPIO_LOOKUP_IDX("A", 0, NULL, 0, GPIO_ACTIVE_LOW),
51                 { },
52         },
53 };
54
55 static struct spi_board_info simone_spi_devices[] __initdata = {
56         {
57                 .modalias               = "mmc_spi",
58                 .platform_data          = &simone_mmc_spi_data,
59                 /*
60                  * We use 10 MHz even though the maximum is 3.7 MHz. The driver
61                  * will limit it automatically to max. frequency.
62                  */
63                 .max_speed_hz           = 10 * 1000 * 1000,
64                 .bus_num                = 0,
65                 .chip_select            = 0,
66                 .mode                   = SPI_MODE_3,
67         },
68 };
69
70 /*
71  * Up to v1.3, the Sim.One used SFRMOUT as SD card chip select, but this goes
72  * low between multi-message command blocks. From v1.4, it uses a GPIO instead.
73  * v1.3 parts will still work, since the signal on SFRMOUT is automatic.
74  */
75 static struct gpiod_lookup_table simone_spi_cs_gpio_table = {
76         .dev_id = "spi0",
77         .table = {
78                 GPIO_LOOKUP("A", 1, "cs", GPIO_ACTIVE_LOW),
79                 { },
80         },
81 };
82
83 static struct ep93xx_spi_info simone_spi_info __initdata = {
84         .use_dma = 1,
85 };
86
87 static struct i2c_board_info __initdata simone_i2c_board_info[] = {
88         {
89                 I2C_BOARD_INFO("ds1337", 0x68),
90         },
91 };
92
93 static struct platform_device simone_audio_device = {
94         .name           = "simone-audio",
95         .id             = -1,
96 };
97
98 static void __init simone_register_audio(void)
99 {
100         ep93xx_register_ac97();
101         platform_device_register(&simone_audio_device);
102 }
103
104 static void __init simone_init_machine(void)
105 {
106         ep93xx_init_devices();
107         ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M);
108         ep93xx_register_eth(&simone_eth_data, 1);
109         ep93xx_register_fb(&simone_fb_info);
110         ep93xx_register_i2c(simone_i2c_board_info,
111                             ARRAY_SIZE(simone_i2c_board_info));
112         gpiod_add_lookup_table(&simone_mmc_spi_gpio_table);
113         gpiod_add_lookup_table(&simone_spi_cs_gpio_table);
114         ep93xx_register_spi(&simone_spi_info, simone_spi_devices,
115                             ARRAY_SIZE(simone_spi_devices));
116         simone_register_audio();
117 }
118
119 MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
120         /* Maintainer: Ryan Mallon */
121         .atag_offset    = 0x100,
122         .map_io         = ep93xx_map_io,
123         .init_irq       = ep93xx_init_irq,
124         .init_time      = ep93xx_timer_init,
125         .init_machine   = simone_init_machine,
126         .restart        = ep93xx_restart,
127 MACHINE_END