arch/arm/boot/dts/vfxxx.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
   2 //
   3 // Copyright 2013 Freescale Semiconductor, Inc.
   4
   5 #include "vf610-pinfunc.h"
   6 #include <dt-bindings/clock/vf610-clock.h>
   7 #include <dt-bindings/interrupt-controller/irq.h>
   8 #include <dt-bindings/gpio/gpio.h>
   9
  10 / {
  11         aliases {
  12                 can0 = &can0;
  13                 can1 = &can1;
  14                 ethernet0 = &fec0;
  15                 ethernet1 = &fec1;
  16                 serial0 = &uart0;
  17                 serial1 = &uart1;
  18                 serial2 = &uart2;
  19                 serial3 = &uart3;
  20                 serial4 = &uart4;
  21                 serial5 = &uart5;
  22                 gpio0 = &gpio0;
  23                 gpio1 = &gpio1;
  24                 gpio2 = &gpio2;
  25                 gpio3 = &gpio3;
  26                 gpio4 = &gpio4;
  27                 usbphy0 = &usbphy0;
  28                 usbphy1 = &usbphy1;
  29         };
  30
  31         fxosc: fxosc {
  32                 compatible = "fixed-clock";
  33                 #clock-cells = <0>;
  34                 clock-frequency = <24000000>;
  35         };
  36
  37         sxosc: sxosc {
  38                 compatible = "fixed-clock";
  39                 #clock-cells = <0>;
  40                 clock-frequency = <32768>;
  41         };
  42
  43         reboot: syscon-reboot {
  44                 compatible = "syscon-reboot";
  45                 regmap = <&src>;
  46                 offset = <0x0>;
  47                 mask = <0x1000>;
  48         };
  49
  50         tempsensor: iio-hwmon {
  51                 compatible = "iio-hwmon";
  52                 io-channels = <&adc0 16>, <&adc1 16>;
  53         };
  54
  55         soc {
  56                 #address-cells = <1>;
  57                 #size-cells = <1>;
  58                 compatible = "simple-bus";
  59                 interrupt-parent = <&mscm_ir>;
  60                 ranges;
  61
  62                 aips0: bus@40000000 {
  63                         compatible = "fsl,aips-bus", "simple-bus";
  64                         #address-cells = <1>;
  65                         #size-cells = <1>;
  66                         reg = <0x40000000 0x00070000>;
  67                         ranges;
  68
  69                         mscm_cpucfg: cpucfg@40001000 {
  70                                 compatible = "fsl,vf610-mscm-cpucfg", "syscon";
  71                                 reg = <0x40001000 0x800>;
  72                         };
  73
  74                         mscm_ir: interrupt-controller@40001800 {
  75                                 compatible = "fsl,vf610-mscm-ir";
  76                                 reg = <0x40001800 0x400>;
  77                                 fsl,cpucfg = <&mscm_cpucfg>;
  78                                 interrupt-controller;
  79                                 #interrupt-cells = <2>;
  80                         };
  81
  82                         edma0: dma-controller@40018000 {
  83                                 #dma-cells = <2>;
  84                                 compatible = "fsl,vf610-edma";
  85                                 reg = <0x40018000 0x2000>,
  86                                         <0x40024000 0x1000>,
  87                                         <0x40025000 0x1000>;
  88                                 dma-channels = <32>;
  89                                 interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
  90                                                 <9 IRQ_TYPE_LEVEL_HIGH>;
  91                                 interrupt-names = "edma-tx", "edma-err";
  92                                 clock-names = "dmamux0", "dmamux1";
  93                                 clocks = <&clks VF610_CLK_DMAMUX0>,
  94                                         <&clks VF610_CLK_DMAMUX1>;
  95                                 status = "disabled";
  96                         };
  97
  98                         can0: can@40020000 {
  99                                 compatible = "fsl,vf610-flexcan";
 100                                 reg = <0x40020000 0x4000>;
 101                                 interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
 102                                 clocks = <&clks VF610_CLK_FLEXCAN0>,
 103                                          <&clks VF610_CLK_FLEXCAN0>;
 104                                 clock-names = "ipg", "per";
 105                                 status = "disabled";
 106                         };
 107
 108                         uart0: serial@40027000 {
 109                                 compatible = "fsl,vf610-lpuart";
 110                                 reg = <0x40027000 0x1000>;
 111                                 interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
 112                                 clocks = <&clks VF610_CLK_UART0>;
 113                                 clock-names = "ipg";
 114                                 dmas = <&edma0 0 2>,
 115                                         <&edma0 0 3>;
 116                                 dma-names = "rx","tx";
 117                                 status = "disabled";
 118                         };
 119
 120                         uart1: serial@40028000 {
 121                                 compatible = "fsl,vf610-lpuart";
 122                                 reg = <0x40028000 0x1000>;
 123                                 interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
 124                                 clocks = <&clks VF610_CLK_UART1>;
 125                                 clock-names = "ipg";
 126                                 dmas = <&edma0 0 4>,
 127                                         <&edma0 0 5>;
 128                                 dma-names = "rx","tx";
 129                                 status = "disabled";
 130                         };
 131
 132                         uart2: serial@40029000 {
 133                                 compatible = "fsl,vf610-lpuart";
 134                                 reg = <0x40029000 0x1000>;
 135                                 interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
 136                                 clocks = <&clks VF610_CLK_UART2>;
 137                                 clock-names = "ipg";
 138                                 dmas = <&edma0 0 6>,
 139                                         <&edma0 0 7>;
 140                                 dma-names = "rx","tx";
 141                                 status = "disabled";
 142                         };
 143
 144                         uart3: serial@4002a000 {
 145                                 compatible = "fsl,vf610-lpuart";
 146                                 reg = <0x4002a000 0x1000>;
 147                                 interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
 148                                 clocks = <&clks VF610_CLK_UART3>;
 149                                 clock-names = "ipg";
 150                                 dmas = <&edma0 0 8>,
 151                                         <&edma0 0 9>;
 152                                 dma-names = "rx","tx";
 153                                 status = "disabled";
 154                         };
 155
 156                         dspi0: spi@4002c000 {
 157                                 #address-cells = <1>;
 158                                 #size-cells = <0>;
 159                                 compatible = "fsl,vf610-dspi";
 160                                 reg = <0x4002c000 0x1000>;
 161                                 interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
 162                                 clocks = <&clks VF610_CLK_DSPI0>;
 163                                 clock-names = "dspi";
 164                                 spi-num-chipselects = <6>;
 165                                 dmas = <&edma1 1 12>,
 166                                         <&edma1 1 13>;
 167                                 dma-names = "rx", "tx";
 168                                 status = "disabled";
 169                         };
 170
 171                         dspi1: spi@4002d000 {
 172                                 #address-cells = <1>;
 173                                 #size-cells = <0>;
 174                                 compatible = "fsl,vf610-dspi";
 175                                 reg = <0x4002d000 0x1000>;
 176                                 interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
 177                                 clocks = <&clks VF610_CLK_DSPI1>;
 178                                 clock-names = "dspi";
 179                                 spi-num-chipselects = <4>;
 180                                 dmas = <&edma1 1 14>,
 181                                         <&edma1 1 15>;
 182                                 dma-names = "rx", "tx";
 183                                 status = "disabled";
 184                         };
 185
 186                         sai0: sai@4002f000 {
 187                                 compatible = "fsl,vf610-sai";
 188                                 reg = <0x4002f000 0x1000>;
 189                                 interrupts = <84 IRQ_TYPE_LEVEL_HIGH>;
 190                                 clocks = <&clks VF610_CLK_SAI0>,
 191                                         <&clks VF610_CLK_SAI0_DIV>,
 192                                         <&clks 0>, <&clks 0>;
 193                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 194                                 dma-names = "tx", "rx";
 195                                 dmas = <&edma0 0 17>,
 196                                         <&edma0 0 16>;
 197                                 status = "disabled";
 198                         };
 199
 200                         sai1: sai@40030000 {
 201                                 compatible = "fsl,vf610-sai";
 202                                 reg = <0x40030000 0x1000>;
 203                                 interrupts = <85 IRQ_TYPE_LEVEL_HIGH>;
 204                                 clocks = <&clks VF610_CLK_SAI1>,
 205                                         <&clks VF610_CLK_SAI1_DIV>,
 206                                         <&clks 0>, <&clks 0>;
 207                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 208                                 dma-names = "tx", "rx";
 209                                 dmas = <&edma0 0 19>,
 210                                         <&edma0 0 18>;
 211                                 status = "disabled";
 212                         };
 213
 214                         sai2: sai@40031000 {
 215                                 compatible = "fsl,vf610-sai";
 216                                 reg = <0x40031000 0x1000>;
 217                                 interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
 218                                 clocks = <&clks VF610_CLK_SAI2>,
 219                                         <&clks VF610_CLK_SAI2_DIV>,
 220                                         <&clks 0>, <&clks 0>;
 221                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 222                                 dma-names = "tx", "rx";
 223                                 dmas = <&edma0 0 21>,
 224                                         <&edma0 0 20>;
 225                                 status = "disabled";
 226                         };
 227
 228                         sai3: sai@40032000 {
 229                                 compatible = "fsl,vf610-sai";
 230                                 reg = <0x40032000 0x1000>;
 231                                 interrupts = <87 IRQ_TYPE_LEVEL_HIGH>;
 232                                 clocks = <&clks VF610_CLK_SAI3>,
 233                                         <&clks VF610_CLK_SAI3_DIV>,
 234                                         <&clks 0>, <&clks 0>;
 235                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 236                                 dma-names = "tx", "rx";
 237                                 dmas = <&edma0 1 9>,
 238                                         <&edma0 1 8>;
 239                                 status = "disabled";
 240                         };
 241
 242                         pit: pit@40037000 {
 243                                 compatible = "fsl,vf610-pit";
 244                                 reg = <0x40037000 0x1000>;
 245                                 interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
 246                                 clocks = <&clks VF610_CLK_PIT>;
 247                                 clock-names = "pit";
 248                         };
 249
 250                         pwm0: pwm@40038000 {
 251                                 compatible = "fsl,vf610-ftm-pwm";
 252                                 #pwm-cells = <3>;
 253                                 reg = <0x40038000 0x1000>;
 254                                 clock-names = "ftm_sys", "ftm_ext",
 255                                               "ftm_fix", "ftm_cnt_clk_en";
 256                                 clocks = <&clks VF610_CLK_FTM0>,
 257                                         <&clks VF610_CLK_FTM0_EXT_SEL>,
 258                                         <&clks VF610_CLK_FTM0_FIX_SEL>,
 259                                         <&clks VF610_CLK_FTM0_EXT_FIX_EN>;
 260                                 status = "disabled";
 261                         };
 262
 263                         pwm1: pwm@40039000 {
 264                                 compatible = "fsl,vf610-ftm-pwm";
 265                                 #pwm-cells = <3>;
 266                                 reg = <0x40039000 0x1000>;
 267                                 clock-names = "ftm_sys", "ftm_ext",
 268                                               "ftm_fix", "ftm_cnt_clk_en";
 269                                 clocks = <&clks VF610_CLK_FTM1>,
 270                                         <&clks VF610_CLK_FTM1_EXT_SEL>,
 271                                         <&clks VF610_CLK_FTM1_FIX_SEL>,
 272                                         <&clks VF610_CLK_FTM1_EXT_FIX_EN>;
 273                                 status = "disabled";
 274                         };
 275
 276                         adc0: adc@4003b000 {
 277                                 compatible = "fsl,vf610-adc";
 278                                 reg = <0x4003b000 0x1000>;
 279                                 interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
 280                                 clocks = <&clks VF610_CLK_ADC0>;
 281                                 clock-names = "adc";
 282                                 #io-channel-cells = <1>;
 283                                 status = "disabled";
 284                                 fsl,adck-max-frequency = <30000000>, <40000000>,
 285                                                         <20000000>;
 286                         };
 287
 288                         tcon0: timing-controller@4003d000 {
 289                                 compatible = "fsl,vf610-tcon";
 290                                 reg = <0x4003d000 0x1000>;
 291                                 clocks = <&clks VF610_CLK_TCON0>;
 292                                 clock-names = "ipg";
 293                                 status = "disabled";
 294                         };
 295
 296                         wdoga5: watchdog@4003e000 {
 297                                 compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
 298                                 reg = <0x4003e000 0x1000>;
 299                                 interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
 300                                 clocks = <&clks VF610_CLK_WDT>;
 301                                 clock-names = "wdog";
 302                                 status = "disabled";
 303                         };
 304
 305                         qspi0: spi@40044000 {
 306                                 #address-cells = <1>;
 307                                 #size-cells = <0>;
 308                                 compatible = "fsl,vf610-qspi";
 309                                 reg = <0x40044000 0x1000>, <0x20000000 0x10000000>;
 310                                 reg-names = "QuadSPI", "QuadSPI-memory";
 311                                 interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
 312                                 clocks = <&clks VF610_CLK_QSPI0_EN>,
 313                                         <&clks VF610_CLK_QSPI0>;
 314                                 clock-names = "qspi_en", "qspi";
 315                                 status = "disabled";
 316                         };
 317
 318                         iomuxc: iomuxc@40048000 {
 319                                 compatible = "fsl,vf610-iomuxc";
 320                                 reg = <0x40048000 0x1000>;
 321                         };
 322
 323                         gpio0: gpio@40049000 {
 324                                 compatible = "fsl,vf610-gpio";
 325                                 reg = <0x40049000 0x1000 0x400ff000 0x40>;
 326                                 gpio-controller;
 327                                 #gpio-cells = <2>;
 328                                 interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
 329                                 interrupt-controller;
 330                                 #interrupt-cells = <2>;
 331                                 gpio-ranges = <&iomuxc 0 0 32>;
 332                         };
 333
 334                         gpio1: gpio@4004a000 {
 335                                 compatible = "fsl,vf610-gpio";
 336                                 reg = <0x4004a000 0x1000 0x400ff040 0x40>;
 337                                 gpio-controller;
 338                                 #gpio-cells = <2>;
 339                                 interrupts = <108 IRQ_TYPE_LEVEL_HIGH>;
 340                                 interrupt-controller;
 341                                 #interrupt-cells = <2>;
 342                                 gpio-ranges = <&iomuxc 0 32 32>;
 343                         };
 344
 345                         gpio2: gpio@4004b000 {
 346                                 compatible = "fsl,vf610-gpio";
 347                                 reg = <0x4004b000 0x1000 0x400ff080 0x40>;
 348                                 gpio-controller;
 349                                 #gpio-cells = <2>;
 350                                 interrupts = <109 IRQ_TYPE_LEVEL_HIGH>;
 351                                 interrupt-controller;
 352                                 #interrupt-cells = <2>;
 353                                 gpio-ranges = <&iomuxc 0 64 32>;
 354                         };
 355
 356                         gpio3: gpio@4004c000 {
 357                                 compatible = "fsl,vf610-gpio";
 358                                 reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
 359                                 gpio-controller;
 360                                 #gpio-cells = <2>;
 361                                 interrupts = <110 IRQ_TYPE_LEVEL_HIGH>;
 362                                 interrupt-controller;
 363                                 #interrupt-cells = <2>;
 364                                 gpio-ranges = <&iomuxc 0 96 32>;
 365                         };
 366
 367                         gpio4: gpio@4004d000 {
 368                                 compatible = "fsl,vf610-gpio";
 369                                 reg = <0x4004d000 0x1000 0x400ff100 0x40>;
 370                                 gpio-controller;
 371                                 #gpio-cells = <2>;
 372                                 interrupts = <111 IRQ_TYPE_LEVEL_HIGH>;
 373                                 interrupt-controller;
 374                                 #interrupt-cells = <2>;
 375                                 gpio-ranges = <&iomuxc 0 128 7>;
 376                         };
 377
 378                         anatop: anatop@40050000 {
 379                                 compatible = "fsl,vf610-anatop", "syscon";
 380                                 reg = <0x40050000 0x400>;
 381                         };
 382
 383                         usbphy0: usbphy@40050800 {
 384                                 compatible = "fsl,vf610-usbphy";
 385                                 reg = <0x40050800 0x400>;
 386                                 interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
 387                                 clocks = <&clks VF610_CLK_USBPHY0>;
 388                                 fsl,anatop = <&anatop>;
 389                                 status = "disabled";
 390                         };
 391
 392                         usbphy1: usbphy@40050c00 {
 393                                 compatible = "fsl,vf610-usbphy";
 394                                 reg = <0x40050c00 0x400>;
 395                                 interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
 396                                 clocks = <&clks VF610_CLK_USBPHY1>;
 397                                 fsl,anatop = <&anatop>;
 398                                 status = "disabled";
 399                         };
 400
 401                         dcu0: dcu@40058000 {
 402                                 compatible = "fsl,vf610-dcu";
 403                                 reg = <0x40058000 0x1200>;
 404                                 interrupts = <30 IRQ_TYPE_LEVEL_HIGH>;
 405                                 clocks = <&clks VF610_CLK_DCU0>,
 406                                         <&clks VF610_CLK_DCU0_DIV>;
 407                                 clock-names = "dcu", "pix";
 408                                 fsl,tcon = <&tcon0>;
 409                                 status = "disabled";
 410                         };
 411
 412                         i2c0: i2c@40066000 {
 413                                 #address-cells = <1>;
 414                                 #size-cells = <0>;
 415                                 compatible = "fsl,vf610-i2c";
 416                                 reg = <0x40066000 0x1000>;
 417                                 interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
 418                                 clocks = <&clks VF610_CLK_I2C0>;
 419                                 clock-names = "ipg";
 420                                 dmas = <&edma0 0 50>,
 421                                         <&edma0 0 51>;
 422                                 dma-names = "rx","tx";
 423                                 status = "disabled";
 424                         };
 425
 426                         i2c1: i2c@40067000 {
 427                                 #address-cells = <1>;
 428                                 #size-cells = <0>;
 429                                 compatible = "fsl,vf610-i2c";
 430                                 reg = <0x40067000 0x1000>;
 431                                 interrupts = <72 IRQ_TYPE_LEVEL_HIGH>;
 432                                 clocks = <&clks VF610_CLK_I2C1>;
 433                                 clock-names = "ipg";
 434                                 dmas = <&edma0 0 52>,
 435                                         <&edma0 0 53>;
 436                                 dma-names = "rx","tx";
 437                                 status = "disabled";
 438                         };
 439
 440                         clks: ccm@4006b000 {
 441                                 compatible = "fsl,vf610-ccm";
 442                                 reg = <0x4006b000 0x1000>;
 443                                 clocks = <&sxosc>, <&fxosc>;
 444                                 clock-names = "sxosc", "fxosc";
 445                                 #clock-cells = <1>;
 446                         };
 447
 448                         usbdev0: usb@40034000 {
 449                                 compatible = "fsl,vf610-usb", "fsl,imx27-usb";
 450                                 reg = <0x40034000 0x800>;
 451                                 interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
 452                                 clocks = <&clks VF610_CLK_USBC0>;
 453                                 fsl,usbphy = <&usbphy0>;
 454                                 fsl,usbmisc = <&usbmisc0 0>;
 455                                 dr_mode = "peripheral";
 456                                 status = "disabled";
 457                         };
 458
 459                         usbmisc0: usb@40034800 {
 460                                 #index-cells = <1>;
 461                                 compatible = "fsl,vf610-usbmisc";
 462                                 reg = <0x40034800 0x200>;
 463                                 clocks = <&clks VF610_CLK_USBC0>;
 464                                 status = "disabled";
 465                         };
 466
 467                         src: src@4006e000 {
 468                                 compatible = "fsl,vf610-src", "syscon";
 469                                 reg = <0x4006e000 0x1000>;
 470                                 interrupts = <96 IRQ_TYPE_LEVEL_HIGH>;
 471                         };
 472                 };
 473
 474                 aips1: bus@40080000 {
 475                         compatible = "fsl,aips-bus", "simple-bus";
 476                         #address-cells = <1>;
 477                         #size-cells = <1>;
 478                         reg = <0x40080000 0x0007f000>;
 479                         ranges;
 480
 481                         edma1: dma-controller@40098000 {
 482                                 #dma-cells = <2>;
 483                                 compatible = "fsl,vf610-edma";
 484                                 reg = <0x40098000 0x2000>,
 485                                         <0x400a1000 0x1000>,
 486                                         <0x400a2000 0x1000>;
 487                                 dma-channels = <32>;
 488                                 interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
 489                                                 <11 IRQ_TYPE_LEVEL_HIGH>;
 490                                 interrupt-names = "edma-tx", "edma-err";
 491                                 clock-names = "dmamux0", "dmamux1";
 492                                 clocks = <&clks VF610_CLK_DMAMUX2>,
 493                                         <&clks VF610_CLK_DMAMUX3>;
 494                                 status = "disabled";
 495                         };
 496
 497                         ocotp: ocotp@400a5000 {
 498                                 compatible = "fsl,vf610-ocotp", "syscon";
 499                                 reg = <0x400a5000 0x1000>;
 500                                 clocks = <&clks VF610_CLK_OCOTP>;
 501                         };
 502
 503                         snvs0: snvs@400a7000 {
 504                             compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
 505                                 reg = <0x400a7000 0x2000>;
 506
 507                                 snvsrtc: snvs-rtc-lp {
 508                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 509                                         regmap = <&snvs0>;
 510                                         offset = <0x34>;
 511                                         interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
 512                                         clocks = <&clks VF610_CLK_SNVS>;
 513                                         clock-names = "snvs-rtc";
 514                                 };
 515                         };
 516
 517                         uart4: serial@400a9000 {
 518                                 compatible = "fsl,vf610-lpuart";
 519                                 reg = <0x400a9000 0x1000>;
 520                                 interrupts = <65 IRQ_TYPE_LEVEL_HIGH>;
 521                                 clocks = <&clks VF610_CLK_UART4>;
 522                                 clock-names = "ipg";
 523                                 status = "disabled";
 524                         };
 525
 526                         uart5: serial@400aa000 {
 527                                 compatible = "fsl,vf610-lpuart";
 528                                 reg = <0x400aa000 0x1000>;
 529                                 interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
 530                                 clocks = <&clks VF610_CLK_UART5>;
 531                                 clock-names = "ipg";
 532                                 status = "disabled";
 533                         };
 534
 535                         dspi2: spi@400ac000 {
 536                                 #address-cells = <1>;
 537                                 #size-cells = <0>;
 538                                 compatible = "fsl,vf610-dspi";
 539                                 reg = <0x400ac000 0x1000>;
 540                                 interrupts = <69 IRQ_TYPE_LEVEL_HIGH>;
 541                                 clocks = <&clks VF610_CLK_DSPI2>;
 542                                 clock-names = "dspi";
 543                                 spi-num-chipselects = <2>;
 544                                 dmas = <&edma1 0 10>,
 545                                         <&edma1 0 11>;
 546                                 dma-names = "rx", "tx";
 547                                 status = "disabled";
 548                         };
 549
 550                         dspi3: spi@400ad000 {
 551                                 #address-cells = <1>;
 552                                 #size-cells = <0>;
 553                                 compatible = "fsl,vf610-dspi";
 554                                 reg = <0x400ad000 0x1000>;
 555                                 interrupts = <70 IRQ_TYPE_LEVEL_HIGH>;
 556                                 clocks = <&clks VF610_CLK_DSPI3>;
 557                                 clock-names = "dspi";
 558                                 spi-num-chipselects = <2>;
 559                                 dmas = <&edma1 0 12>,
 560                                         <&edma1 0 13>;
 561                                 dma-names = "rx", "tx";
 562                                 status = "disabled";
 563                         };
 564
 565                         adc1: adc@400bb000 {
 566                                 compatible = "fsl,vf610-adc";
 567                                 reg = <0x400bb000 0x1000>;
 568                                 interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
 569                                 clocks = <&clks VF610_CLK_ADC1>;
 570                                 clock-names = "adc";
 571                                 #io-channel-cells = <1>;
 572                                 status = "disabled";
 573                                 fsl,adck-max-frequency = <30000000>, <40000000>,
 574                                                         <20000000>;
 575                         };
 576
 577                         esdhc0: esdhc@400b1000 {
 578                                 compatible = "fsl,imx53-esdhc";
 579                                 reg = <0x400b1000 0x1000>;
 580                                 interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
 581                                 clocks = <&clks VF610_CLK_IPG_BUS>,
 582                                         <&clks VF610_CLK_PLATFORM_BUS>,
 583                                         <&clks VF610_CLK_ESDHC0>;
 584                                 clock-names = "ipg", "ahb", "per";
 585                                 status = "disabled";
 586                         };
 587
 588                         esdhc1: esdhc@400b2000 {
 589                                 compatible = "fsl,imx53-esdhc";
 590                                 reg = <0x400b2000 0x1000>;
 591                                 interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
 592                                 clocks = <&clks VF610_CLK_IPG_BUS>,
 593                                         <&clks VF610_CLK_PLATFORM_BUS>,
 594                                         <&clks VF610_CLK_ESDHC1>;
 595                                 clock-names = "ipg", "ahb", "per";
 596                                 status = "disabled";
 597                         };
 598
 599                         usbh1: usb@400b4000 {
 600                                 compatible = "fsl,vf610-usb", "fsl,imx27-usb";
 601                                 reg = <0x400b4000 0x800>;
 602                                 interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
 603                                 clocks = <&clks VF610_CLK_USBC1>;
 604                                 fsl,usbphy = <&usbphy1>;
 605                                 fsl,usbmisc = <&usbmisc1 0>;
 606                                 dr_mode = "host";
 607                                 status = "disabled";
 608                         };
 609
 610                         usbmisc1: usb@400b4800 {
 611                                 #index-cells = <1>;
 612                                 compatible = "fsl,vf610-usbmisc";
 613                                 reg = <0x400b4800 0x200>;
 614                                 clocks = <&clks VF610_CLK_USBC1>;
 615                                 status = "disabled";
 616                         };
 617
 618                         ftm: ftm@400b8000 {
 619                                 compatible = "fsl,ftm-timer";
 620                                 reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
 621                                 interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
 622                                 clock-names = "ftm-evt", "ftm-src",
 623                                         "ftm-evt-counter-en", "ftm-src-counter-en";
 624                                 clocks = <&clks VF610_CLK_FTM2>,
 625                                         <&clks VF610_CLK_FTM3>,
 626                                         <&clks VF610_CLK_FTM2_EXT_FIX_EN>,
 627                                         <&clks VF610_CLK_FTM3_EXT_FIX_EN>;
 628                                 status = "disabled";
 629                         };
 630
 631                         qspi1: spi@400c4000 {
 632                                 #address-cells = <1>;
 633                                 #size-cells = <0>;
 634                                 compatible = "fsl,vf610-qspi";
 635                                 reg = <0x400c4000 0x1000>, <0x50000000 0x10000000>;
 636                                 reg-names = "QuadSPI", "QuadSPI-memory";
 637                                 interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
 638                                 clocks = <&clks VF610_CLK_QSPI1_EN>,
 639                                         <&clks VF610_CLK_QSPI1>;
 640                                 clock-names = "qspi_en", "qspi";
 641                                 status = "disabled";
 642                         };
 643
 644                         dac0: dac@400cc000 {
 645                                 compatible = "fsl,vf610-dac";
 646                                 reg = <0x400cc000 1000>;
 647                                 interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
 648                                 clock-names = "dac";
 649                                 clocks = <&clks VF610_CLK_DAC0>;
 650                                 status = "disabled";
 651                         };
 652
 653                         dac1: dac@400cd000 {
 654                                 compatible = "fsl,vf610-dac";
 655                                 reg = <0x400cd000 1000>;
 656                                 interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
 657                                 clock-names = "dac";
 658                                 clocks = <&clks VF610_CLK_DAC1>;
 659                                 status = "disabled";
 660                         };
 661
 662                         fec0: ethernet@400d0000 {
 663                                 compatible = "fsl,mvf600-fec";
 664                                 reg = <0x400d0000 0x1000>;
 665                                 interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
 666                                 clocks = <&clks VF610_CLK_ENET0>,
 667                                         <&clks VF610_CLK_ENET0>,
 668                                         <&clks VF610_CLK_ENET>;
 669                                 clock-names = "ipg", "ahb", "ptp";
 670                                 status = "disabled";
 671                         };
 672
 673                         fec1: ethernet@400d1000 {
 674                                 compatible = "fsl,mvf600-fec";
 675                                 reg = <0x400d1000 0x1000>;
 676                                 interrupts = <79 IRQ_TYPE_LEVEL_HIGH>;
 677                                 clocks = <&clks VF610_CLK_ENET1>,
 678                                         <&clks VF610_CLK_ENET1>,
 679                                         <&clks VF610_CLK_ENET>;
 680                                 clock-names = "ipg", "ahb", "ptp";
 681                                 status = "disabled";
 682                         };
 683
 684                         can1: can@400d4000 {
 685                                 compatible = "fsl,vf610-flexcan";
 686                                 reg = <0x400d4000 0x4000>;
 687                                 interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
 688                                 clocks = <&clks VF610_CLK_FLEXCAN1>,
 689                                          <&clks VF610_CLK_FLEXCAN1>;
 690                                 clock-names = "ipg", "per";
 691                                 status = "disabled";
 692                         };
 693
 694                         nfc: nand@400e0000 {
 695                                 #address-cells = <1>;
 696                                 #size-cells = <0>;
 697                                 compatible = "fsl,vf610-nfc";
 698                                 reg = <0x400e0000 0x4000>;
 699                                 interrupts = <83 IRQ_TYPE_LEVEL_HIGH>;
 700                                 clocks = <&clks VF610_CLK_NFC>;
 701                                 clock-names = "nfc";
 702                                 status = "disabled";
 703                         };
 704
 705                         i2c2: i2c@400e6000 {
 706                                 #address-cells = <1>;
 707                                 #size-cells = <0>;
 708                                 compatible = "fsl,vf610-i2c";
 709                                 reg = <0x400e6000 0x1000>;
 710                                 interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
 711                                 clocks = <&clks VF610_CLK_I2C2>;
 712                                 clock-names = "ipg";
 713                                 dmas = <&edma0 1 36>,
 714                                         <&edma0 1 37>;
 715                                 dma-names = "rx","tx";
 716                                 status = "disabled";
 717                         };
 718
 719                         i2c3: i2c@400e7000 {
 720                                 #address-cells = <1>;
 721                                 #size-cells = <0>;
 722                                 compatible = "fsl,vf610-i2c";
 723                                 reg = <0x400e7000 0x1000>;
 724                                 interrupts = <74 IRQ_TYPE_LEVEL_HIGH>;
 725                                 clocks = <&clks VF610_CLK_I2C3>;
 726                                 clock-names = "ipg";
 727                                 dmas = <&edma0 1 38>,
 728                                         <&edma0 1 39>;
 729                                 dma-names = "rx","tx";
 730                                 status = "disabled";
 731                         };
 732
 733                         crypto: crypto@400f0000 {
 734                                 compatible = "fsl,sec-v4.0";
 735                                 #address-cells = <1>;
 736                                 #size-cells = <1>;
 737                                 reg = <0x400f0000 0x9000>;
 738                                 ranges = <0 0x400f0000 0x9000>;
 739                                 clocks = <&clks VF610_CLK_CAAM>;
 740                                 clock-names = "ipg";
 741
 742                                 sec_jr0: jr0@1000 {
 743                                         compatible = "fsl,sec-v4.0-job-ring";
 744                                         reg = <0x1000 0x1000>;
 745                                         interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
 746                                 };
 747
 748                                 sec_jr1: jr1@2000 {
 749                                         compatible = "fsl,sec-v4.0-job-ring";
 750                                         reg = <0x2000 0x1000>;
 751                                         interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
 752                                 };
 753                         };
 754                 };
 755         };
 756 };