arch/arm/boot/dts/sun8i-r40.dtsi

   1 /*
   2  * Copyright 2017 Chen-Yu Tsai <wens@csie.org>
   3  * Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
   4  *
   5  * This file is dual-licensed: you can use it either under the terms
   6  * of the GPL or the X11 license, at your option. Note that this dual
   7  * licensing only applies to this file, and not this project as a
   8  * whole.
   9  *
  10  *  a) This file is free software; you can redistribute it and/or
  11  *     modify it under the terms of the GNU General Public License as
  12  *     published by the Free Software Foundation; either version 2 of the
  13  *     License, or (at your option) any later version.
  14  *
  15  *     This file is distributed in the hope that it will be useful,
  16  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  *     GNU General Public License for more details.
  19  *
  20  * Or, alternatively,
  21  *
  22  *  b) Permission is hereby granted, free of charge, to any person
  23  *     obtaining a copy of this software and associated documentation
  24  *     files (the "Software"), to deal in the Software without
  25  *     restriction, including without limitation the rights to use,
  26  *     copy, modify, merge, publish, distribute, sublicense, and/or
  27  *     sell copies of the Software, and to permit persons to whom the
  28  *     Software is furnished to do so, subject to the following
  29  *     conditions:
  30  *
  31  *     The above copyright notice and this permission notice shall be
  32  *     included in all copies or substantial portions of the Software.
  33  *
  34  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  35  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  36  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  37  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  38  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  39  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  40  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  41  *     OTHER DEALINGS IN THE SOFTWARE.
  42  */
  43
  44 #include <dt-bindings/interrupt-controller/arm-gic.h>
  45 #include <dt-bindings/clock/sun8i-de2.h>
  46 #include <dt-bindings/clock/sun8i-r40-ccu.h>
  47 #include <dt-bindings/clock/sun8i-tcon-top.h>
  48 #include <dt-bindings/reset/sun8i-r40-ccu.h>
  49 #include <dt-bindings/reset/sun8i-de2.h>
  50 #include <dt-bindings/thermal/thermal.h>
  51
  52 / {
  53         #address-cells = <1>;
  54         #size-cells = <1>;
  55         interrupt-parent = <&gic>;
  56
  57         clocks {
  58                 #address-cells = <1>;
  59                 #size-cells = <1>;
  60                 ranges;
  61
  62                 osc24M: osc24M {
  63                         #clock-cells = <0>;
  64                         compatible = "fixed-clock";
  65                         clock-frequency = <24000000>;
  66                         clock-accuracy = <50000>;
  67                         clock-output-names = "osc24M";
  68                 };
  69
  70                 osc32k: osc32k {
  71                         #clock-cells = <0>;
  72                         compatible = "fixed-clock";
  73                         clock-frequency = <32768>;
  74                         clock-accuracy = <20000>;
  75                         clock-output-names = "ext-osc32k";
  76                 };
  77         };
  78
  79         cpus {
  80                 #address-cells = <1>;
  81                 #size-cells = <0>;
  82
  83                 cpu0: cpu@0 {
  84                         compatible = "arm,cortex-a7";
  85                         device_type = "cpu";
  86                         reg = <0>;
  87                 };
  88
  89                 cpu1: cpu@1 {
  90                         compatible = "arm,cortex-a7";
  91                         device_type = "cpu";
  92                         reg = <1>;
  93                 };
  94
  95                 cpu2: cpu@2 {
  96                         compatible = "arm,cortex-a7";
  97                         device_type = "cpu";
  98                         reg = <2>;
  99                 };
 100
 101                 cpu3: cpu@3 {
 102                         compatible = "arm,cortex-a7";
 103                         device_type = "cpu";
 104                         reg = <3>;
 105                 };
 106         };
 107
 108         de: display-engine {
 109                 compatible = "allwinner,sun8i-r40-display-engine";
 110                 allwinner,pipelines = <&mixer0>, <&mixer1>;
 111                 status = "disabled";
 112         };
 113
 114         thermal-zones {
 115                 cpu_thermal: cpu0-thermal {
 116                         /* milliseconds */
 117                         polling-delay-passive = <0>;
 118                         polling-delay = <0>;
 119                         thermal-sensors = <&ths 0>;
 120                 };
 121
 122                 gpu_thermal: gpu-thermal {
 123                         /* milliseconds */
 124                         polling-delay-passive = <0>;
 125                         polling-delay = <0>;
 126                         thermal-sensors = <&ths 1>;
 127                 };
 128         };
 129
 130         soc {
 131                 compatible = "simple-bus";
 132                 #address-cells = <1>;
 133                 #size-cells = <1>;
 134                 ranges;
 135
 136                 display_clocks: clock@1000000 {
 137                         compatible = "allwinner,sun8i-r40-de2-clk",
 138                                      "allwinner,sun8i-h3-de2-clk";
 139                         reg = <0x01000000 0x10000>;
 140                         clocks = <&ccu CLK_BUS_DE>,
 141                                  <&ccu CLK_DE>;
 142                         clock-names = "bus",
 143                                       "mod";
 144                         resets = <&ccu RST_BUS_DE>;
 145                         #clock-cells = <1>;
 146                         #reset-cells = <1>;
 147                 };
 148
 149                 mixer0: mixer@1100000 {
 150                         compatible = "allwinner,sun8i-r40-de2-mixer-0";
 151                         reg = <0x01100000 0x100000>;
 152                         clocks = <&display_clocks CLK_BUS_MIXER0>,
 153                                  <&display_clocks CLK_MIXER0>;
 154                         clock-names = "bus",
 155                                       "mod";
 156                         resets = <&display_clocks RST_MIXER0>;
 157
 158                         ports {
 159                                 #address-cells = <1>;
 160                                 #size-cells = <0>;
 161
 162                                 mixer0_out: port@1 {
 163                                         reg = <1>;
 164                                         mixer0_out_tcon_top: endpoint {
 165                                                 remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
 166                                         };
 167                                 };
 168                         };
 169                 };
 170
 171                 mixer1: mixer@1200000 {
 172                         compatible = "allwinner,sun8i-r40-de2-mixer-1";
 173                         reg = <0x01200000 0x100000>;
 174                         clocks = <&display_clocks CLK_BUS_MIXER1>,
 175                                  <&display_clocks CLK_MIXER1>;
 176                         clock-names = "bus",
 177                                       "mod";
 178                         resets = <&display_clocks RST_WB>;
 179
 180                         ports {
 181                                 #address-cells = <1>;
 182                                 #size-cells = <0>;
 183
 184                                 mixer1_out: port@1 {
 185                                         reg = <1>;
 186                                         mixer1_out_tcon_top: endpoint {
 187                                                 remote-endpoint = <&tcon_top_mixer1_in_mixer1>;
 188                                         };
 189                                 };
 190                         };
 191                 };
 192
 193                 deinterlace: deinterlace@1400000 {
 194                         compatible = "allwinner,sun8i-r40-deinterlace",
 195                                      "allwinner,sun8i-h3-deinterlace";
 196                         reg = <0x01400000 0x20000>;
 197                         clocks = <&ccu CLK_BUS_DEINTERLACE>,
 198                                  <&ccu CLK_DEINTERLACE>,
 199                                  /*
 200                                   * NOTE: Contrary to what datasheet claims,
 201                                   * DRAM deinterlace gate doesn't exist and
 202                                   * it's shared with CSI1.
 203                                   */
 204                                  <&ccu CLK_DRAM_CSI1>;
 205                         clock-names = "bus", "mod", "ram";
 206                         resets = <&ccu RST_BUS_DEINTERLACE>;
 207                         interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 208                         interconnects = <&mbus 9>;
 209                         interconnect-names = "dma-mem";
 210                 };
 211
 212                 syscon: system-control@1c00000 {
 213                         compatible = "allwinner,sun8i-r40-system-control",
 214                                      "allwinner,sun4i-a10-system-control";
 215                         reg = <0x01c00000 0x30>;
 216                         #address-cells = <1>;
 217                         #size-cells = <1>;
 218                         ranges;
 219
 220                         sram_c: sram@1d00000 {
 221                                 compatible = "mmio-sram";
 222                                 reg = <0x01d00000 0xd0000>;
 223                                 #address-cells = <1>;
 224                                 #size-cells = <1>;
 225                                 ranges = <0 0x01d00000 0xd0000>;
 226
 227                                 ve_sram: sram-section@0 {
 228                                         compatible = "allwinner,sun8i-r40-sram-c1",
 229                                                      "allwinner,sun4i-a10-sram-c1";
 230                                         reg = <0x000000 0x80000>;
 231                                 };
 232                         };
 233                 };
 234
 235                 nmi_intc: interrupt-controller@1c00030 {
 236                         compatible = "allwinner,sun7i-a20-sc-nmi";
 237                         interrupt-controller;
 238                         #interrupt-cells = <2>;
 239                         reg = <0x01c00030 0x0c>;
 240                         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 241                 };
 242
 243                 dma: dma-controller@1c02000 {
 244                         compatible = "allwinner,sun8i-r40-dma",
 245                                      "allwinner,sun50i-a64-dma";
 246                         reg = <0x01c02000 0x1000>;
 247                         interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 248                         clocks = <&ccu CLK_BUS_DMA>;
 249                         dma-channels = <16>;
 250                         dma-requests = <31>;
 251                         resets = <&ccu RST_BUS_DMA>;
 252                         #dma-cells = <1>;
 253                 };
 254
 255                 spi0: spi@1c05000 {
 256                         compatible = "allwinner,sun8i-r40-spi",
 257                                      "allwinner,sun8i-h3-spi";
 258                         reg = <0x01c05000 0x1000>;
 259                         interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 260                         clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
 261                         clock-names = "ahb", "mod";
 262                         resets = <&ccu RST_BUS_SPI0>;
 263                         status = "disabled";
 264                         #address-cells = <1>;
 265                         #size-cells = <0>;
 266                 };
 267
 268                 spi1: spi@1c06000 {
 269                         compatible = "allwinner,sun8i-r40-spi",
 270                                      "allwinner,sun8i-h3-spi";
 271                         reg = <0x01c06000 0x1000>;
 272                         interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 273                         clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
 274                         clock-names = "ahb", "mod";
 275                         resets = <&ccu RST_BUS_SPI1>;
 276                         status = "disabled";
 277                         #address-cells = <1>;
 278                         #size-cells = <0>;
 279                 };
 280
 281                 csi0: csi@1c09000 {
 282                         compatible = "allwinner,sun8i-r40-csi0",
 283                                      "allwinner,sun7i-a20-csi0";
 284                         reg = <0x01c09000 0x1000>;
 285                         interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 286                         clocks = <&ccu CLK_BUS_CSI0>, <&ccu CLK_CSI_SCLK>,
 287                                  <&ccu CLK_DRAM_CSI0>;
 288                         clock-names = "bus", "isp", "ram";
 289                         resets = <&ccu RST_BUS_CSI0>;
 290                         interconnects = <&mbus 5>;
 291                         interconnect-names = "dma-mem";
 292                         status = "disabled";
 293                 };
 294
 295                 video-codec@1c0e000 {
 296                         compatible = "allwinner,sun8i-r40-video-engine";
 297                         reg = <0x01c0e000 0x1000>;
 298                         clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
 299                         <&ccu CLK_DRAM_VE>;
 300                         clock-names = "ahb", "mod", "ram";
 301                         resets = <&ccu RST_BUS_VE>;
 302                         interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 303                         allwinner,sram = <&ve_sram 1>;
 304                 };
 305
 306                 mmc0: mmc@1c0f000 {
 307                         compatible = "allwinner,sun8i-r40-mmc",
 308                                      "allwinner,sun50i-a64-mmc";
 309                         reg = <0x01c0f000 0x1000>;
 310                         clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
 311                         clock-names = "ahb", "mmc";
 312                         resets = <&ccu RST_BUS_MMC0>;
 313                         reset-names = "ahb";
 314                         pinctrl-0 = <&mmc0_pins>;
 315                         pinctrl-names = "default";
 316                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 317                         status = "disabled";
 318                         #address-cells = <1>;
 319                         #size-cells = <0>;
 320                 };
 321
 322                 mmc1: mmc@1c10000 {
 323                         compatible = "allwinner,sun8i-r40-mmc",
 324                                      "allwinner,sun50i-a64-mmc";
 325                         reg = <0x01c10000 0x1000>;
 326                         clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
 327                         clock-names = "ahb", "mmc";
 328                         resets = <&ccu RST_BUS_MMC1>;
 329                         reset-names = "ahb";
 330                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 331                         status = "disabled";
 332                         #address-cells = <1>;
 333                         #size-cells = <0>;
 334                 };
 335
 336                 mmc2: mmc@1c11000 {
 337                         compatible = "allwinner,sun8i-r40-emmc",
 338                                      "allwinner,sun50i-a64-emmc";
 339                         reg = <0x01c11000 0x1000>;
 340                         clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
 341                         clock-names = "ahb", "mmc";
 342                         resets = <&ccu RST_BUS_MMC2>;
 343                         reset-names = "ahb";
 344                         pinctrl-0 = <&mmc2_pins>;
 345                         pinctrl-names = "default";
 346                         interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 347                         status = "disabled";
 348                         #address-cells = <1>;
 349                         #size-cells = <0>;
 350                 };
 351
 352                 mmc3: mmc@1c12000 {
 353                         compatible = "allwinner,sun8i-r40-mmc",
 354                                      "allwinner,sun50i-a64-mmc";
 355                         reg = <0x01c12000 0x1000>;
 356                         clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>;
 357                         clock-names = "ahb", "mmc";
 358                         resets = <&ccu RST_BUS_MMC3>;
 359                         reset-names = "ahb";
 360                         pinctrl-0 = <&mmc3_pins>;
 361                         pinctrl-names = "default";
 362                         interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 363                         status = "disabled";
 364                         #address-cells = <1>;
 365                         #size-cells = <0>;
 366                 };
 367
 368                 usbphy: phy@1c13400 {
 369                         compatible = "allwinner,sun8i-r40-usb-phy";
 370                         reg = <0x01c13400 0x14>,
 371                               <0x01c14800 0x4>,
 372                               <0x01c19800 0x4>,
 373                               <0x01c1c800 0x4>;
 374                         reg-names = "phy_ctrl",
 375                                     "pmu0",
 376                                     "pmu1",
 377                                     "pmu2";
 378                         clocks = <&ccu CLK_USB_PHY0>,
 379                                  <&ccu CLK_USB_PHY1>,
 380                                  <&ccu CLK_USB_PHY2>;
 381                         clock-names = "usb0_phy",
 382                                       "usb1_phy",
 383                                       "usb2_phy";
 384                         resets = <&ccu RST_USB_PHY0>,
 385                                  <&ccu RST_USB_PHY1>,
 386                                  <&ccu RST_USB_PHY2>;
 387                         reset-names = "usb0_reset",
 388                                       "usb1_reset",
 389                                       "usb2_reset";
 390                         status = "disabled";
 391                         #phy-cells = <1>;
 392                 };
 393
 394                 crypto: crypto@1c15000 {
 395                         compatible = "allwinner,sun8i-r40-crypto";
 396                         reg = <0x01c15000 0x1000>;
 397                         interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 398                         clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
 399                         clock-names = "bus", "mod";
 400                         resets = <&ccu RST_BUS_CE>;
 401                 };
 402
 403                 spi2: spi@1c17000 {
 404                         compatible = "allwinner,sun8i-r40-spi",
 405                                      "allwinner,sun8i-h3-spi";
 406                         reg = <0x01c17000 0x1000>;
 407                         interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 408                         clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>;
 409                         clock-names = "ahb", "mod";
 410                         resets = <&ccu RST_BUS_SPI2>;
 411                         status = "disabled";
 412                         #address-cells = <1>;
 413                         #size-cells = <0>;
 414                 };
 415
 416                 ahci: sata@1c18000 {
 417                         compatible = "allwinner,sun8i-r40-ahci";
 418                         reg = <0x01c18000 0x1000>;
 419                         interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 420                         clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
 421                         resets = <&ccu RST_BUS_SATA>;
 422                         reset-names = "ahci";
 423                         status = "disabled";
 424                 };
 425
 426                 ehci1: usb@1c19000 {
 427                         compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
 428                         reg = <0x01c19000 0x100>;
 429                         interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 430                         clocks = <&ccu CLK_BUS_EHCI1>;
 431                         resets = <&ccu RST_BUS_EHCI1>;
 432                         phys = <&usbphy 1>;
 433                         phy-names = "usb";
 434                         status = "disabled";
 435                 };
 436
 437                 ohci1: usb@1c19400 {
 438                         compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
 439                         reg = <0x01c19400 0x100>;
 440                         interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 441                         clocks = <&ccu CLK_BUS_OHCI1>,
 442                                  <&ccu CLK_USB_OHCI1>;
 443                         resets = <&ccu RST_BUS_OHCI1>;
 444                         phys = <&usbphy 1>;
 445                         phy-names = "usb";
 446                         status = "disabled";
 447                 };
 448
 449                 ehci2: usb@1c1c000 {
 450                         compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
 451                         reg = <0x01c1c000 0x100>;
 452                         interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 453                         clocks = <&ccu CLK_BUS_EHCI2>;
 454                         resets = <&ccu RST_BUS_EHCI2>;
 455                         phys = <&usbphy 2>;
 456                         phy-names = "usb";
 457                         status = "disabled";
 458                 };
 459
 460                 ohci2: usb@1c1c400 {
 461                         compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
 462                         reg = <0x01c1c400 0x100>;
 463                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 464                         clocks = <&ccu CLK_BUS_OHCI2>,
 465                                  <&ccu CLK_USB_OHCI2>;
 466                         resets = <&ccu RST_BUS_OHCI2>;
 467                         phys = <&usbphy 2>;
 468                         phy-names = "usb";
 469                         status = "disabled";
 470                 };
 471
 472                 spi3: spi@1c1f000 {
 473                         compatible = "allwinner,sun8i-r40-spi",
 474                                      "allwinner,sun8i-h3-spi";
 475                         reg = <0x01c1f000 0x1000>;
 476                         interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 477                         clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>;
 478                         clock-names = "ahb", "mod";
 479                         resets = <&ccu RST_BUS_SPI3>;
 480                         status = "disabled";
 481                         #address-cells = <1>;
 482                         #size-cells = <0>;
 483                 };
 484
 485                 ccu: clock@1c20000 {
 486                         compatible = "allwinner,sun8i-r40-ccu";
 487                         reg = <0x01c20000 0x400>;
 488                         clocks = <&osc24M>, <&rtc 0>;
 489                         clock-names = "hosc", "losc";
 490                         #clock-cells = <1>;
 491                         #reset-cells = <1>;
 492                 };
 493
 494                 rtc: rtc@1c20400 {
 495                         compatible = "allwinner,sun8i-r40-rtc";
 496                         reg = <0x01c20400 0x400>;
 497                         interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 498                         clock-output-names = "osc32k", "osc32k-out";
 499                         clocks = <&osc32k>;
 500                         #clock-cells = <1>;
 501                 };
 502
 503                 pio: pinctrl@1c20800 {
 504                         compatible = "allwinner,sun8i-r40-pinctrl";
 505                         reg = <0x01c20800 0x400>;
 506                         interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 507                         clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
 508                         clock-names = "apb", "hosc", "losc";
 509                         gpio-controller;
 510                         interrupt-controller;
 511                         #interrupt-cells = <3>;
 512                         #gpio-cells = <3>;
 513
 514                         clk_out_a_pin: clk-out-a-pin {
 515                                 pins = "PI12";
 516                                 function = "clk_out_a";
 517                         };
 518
 519                         /omit-if-no-ref/
 520                         csi0_8bits_pins: csi0-8bits-pins {
 521                                 pins = "PE0", "PE2", "PE3", "PE4", "PE5",
 522                                        "PE6", "PE7", "PE8", "PE9", "PE10",
 523                                        "PE11";
 524                                 function = "csi0";
 525                         };
 526
 527                         /omit-if-no-ref/
 528                         csi0_mclk_pin: csi0-mclk-pin {
 529                                 pins = "PE1";
 530                                 function = "csi0";
 531                         };
 532
 533                         gmac_rgmii_pins: gmac-rgmii-pins {
 534                                 pins = "PA0", "PA1", "PA2", "PA3",
 535                                        "PA4", "PA5", "PA6", "PA7",
 536                                        "PA8", "PA10", "PA11", "PA12",
 537                                        "PA13", "PA15", "PA16";
 538                                 function = "gmac";
 539                                 /*
 540                                  * data lines in RGMII mode use DDR mode
 541                                  * and need a higher signal drive strength
 542                                  */
 543                                 drive-strength = <40>;
 544                         };
 545
 546                         i2c0_pins: i2c0-pins {
 547                                 pins = "PB0", "PB1";
 548                                 function = "i2c0";
 549                         };
 550
 551                         i2c1_pins: i2c1-pins {
 552                                 pins = "PB18", "PB19";
 553                                 function = "i2c1";
 554                         };
 555
 556                         i2c2_pins: i2c2-pins {
 557                                 pins = "PB20", "PB21";
 558                                 function = "i2c2";
 559                         };
 560
 561                         i2c3_pins: i2c3-pins {
 562                                 pins = "PI0", "PI1";
 563                                 function = "i2c3";
 564                         };
 565
 566                         i2c4_pins: i2c4-pins {
 567                                 pins = "PI2", "PI3";
 568                                 function = "i2c4";
 569                         };
 570
 571                         ir0_pins: ir0-pins {
 572                                 pins = "PB4";
 573                                 function = "ir0";
 574                         };
 575
 576                         ir1_pins: ir1-pins {
 577                                 pins = "PB23";
 578                                 function = "ir1";
 579                         };
 580
 581                         mmc0_pins: mmc0-pins {
 582                                 pins = "PF0", "PF1", "PF2",
 583                                        "PF3", "PF4", "PF5";
 584                                 function = "mmc0";
 585                                 drive-strength = <30>;
 586                                 bias-pull-up;
 587                         };
 588
 589                         mmc1_pg_pins: mmc1-pg-pins {
 590                                 pins = "PG0", "PG1", "PG2",
 591                                        "PG3", "PG4", "PG5";
 592                                 function = "mmc1";
 593                                 drive-strength = <30>;
 594                                 bias-pull-up;
 595                         };
 596
 597                         mmc2_pins: mmc2-pins {
 598                                 pins = "PC5", "PC6", "PC7", "PC8", "PC9",
 599                                        "PC10", "PC11", "PC12", "PC13", "PC14",
 600                                        "PC15", "PC24";
 601                                 function = "mmc2";
 602                                 drive-strength = <30>;
 603                                 bias-pull-up;
 604                         };
 605
 606                         /omit-if-no-ref/
 607                         mmc3_pins: mmc3-pins {
 608                                 pins = "PI4", "PI5", "PI6",
 609                                        "PI7", "PI8", "PI9";
 610                                 function = "mmc3";
 611                                 drive-strength = <30>;
 612                                 bias-pull-up;
 613                         };
 614
 615                         /omit-if-no-ref/
 616                         spi0_pc_pins: spi0-pc-pins {
 617                                 pins = "PC0", "PC1", "PC2";
 618                                 function = "spi0";
 619                         };
 620
 621                         /omit-if-no-ref/
 622                         spi0_cs0_pc_pin: spi0-cs0-pc-pin {
 623                                 pins = "PC23";
 624                                 function = "spi0";
 625                         };
 626
 627                         /omit-if-no-ref/
 628                         spi1_pi_pins: spi1-pi-pins {
 629                                 pins = "PI17", "PI18", "PI19";
 630                                 function = "spi1";
 631                         };
 632
 633                         /omit-if-no-ref/
 634                         spi1_cs0_pi_pin: spi1-cs0-pi-pin {
 635                                 pins = "PI16";
 636                                 function = "spi1";
 637                         };
 638
 639                         /omit-if-no-ref/
 640                         spi1_cs1_pi_pin: spi1-cs1-pi-pin {
 641                                 pins = "PI15";
 642                                 function = "spi1";
 643                         };
 644
 645                         /omit-if-no-ref/
 646                         uart0_pb_pins: uart0-pb-pins {
 647                                 pins = "PB22", "PB23";
 648                                 function = "uart0";
 649                         };
 650
 651                         /omit-if-no-ref/
 652                         uart2_pi_pins: uart2-pi-pins {
 653                                 pins = "PI18", "PI19";
 654                                 function = "uart2";
 655                         };
 656
 657                         /omit-if-no-ref/
 658                         uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins{
 659                                 pins = "PI16", "PI17";
 660                                 function = "uart2";
 661                         };
 662
 663                         /omit-if-no-ref/
 664                         uart3_pg_pins: uart3-pg-pins {
 665                                 pins = "PG6", "PG7";
 666                                 function = "uart3";
 667                         };
 668
 669                         /omit-if-no-ref/
 670                         uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins {
 671                                 pins = "PG8", "PG9";
 672                                 function = "uart3";
 673                         };
 674
 675                         /omit-if-no-ref/
 676                         uart4_pg_pins: uart4-pg-pins {
 677                                 pins = "PG10", "PG11";
 678                                 function = "uart4";
 679                         };
 680
 681                         /omit-if-no-ref/
 682                         uart5_ph_pins: uart5-ph-pins {
 683                                 pins = "PH6", "PH7";
 684                                 function = "uart5";
 685                         };
 686
 687                         /omit-if-no-ref/
 688                         uart7_pi_pins: uart7-pi-pins {
 689                                 pins = "PI20", "PI21";
 690                                 function = "uart7";
 691                         };
 692                 };
 693
 694                 timer@1c20c00 {
 695                         compatible = "allwinner,sun4i-a10-timer";
 696                         reg = <0x01c20c00 0x90>;
 697                         interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
 698                                      <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
 699                                      <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
 700                                      <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
 701                                      <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
 702                                      <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 703                         clocks = <&osc24M>;
 704                 };
 705
 706                 wdt: watchdog@1c20c90 {
 707                         compatible = "allwinner,sun4i-a10-wdt";
 708                         reg = <0x01c20c90 0x10>;
 709                         interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 710                         clocks = <&osc24M>;
 711                 };
 712
 713                 ir0: ir@1c21800 {
 714                         compatible = "allwinner,sun8i-r40-ir",
 715                                      "allwinner,sun6i-a31-ir";
 716                         reg = <0x01c21800 0x400>;
 717                         pinctrl-0 = <&ir0_pins>;
 718                         pinctrl-names = "default";
 719                         clocks = <&ccu CLK_BUS_IR0>, <&ccu CLK_IR0>;
 720                         clock-names = "apb", "ir";
 721                         interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 722                         resets = <&ccu RST_BUS_IR0>;
 723                         status = "disabled";
 724                 };
 725
 726                 ir1: ir@1c21c00 {
 727                         compatible = "allwinner,sun8i-r40-ir",
 728                                      "allwinner,sun6i-a31-ir";
 729                         reg = <0x01c21c00 0x400>;
 730                         pinctrl-0 = <&ir1_pins>;
 731                         pinctrl-names = "default";
 732                         clocks = <&ccu CLK_BUS_IR1>, <&ccu CLK_IR1>;
 733                         clock-names = "apb", "ir";
 734                         interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 735                         resets = <&ccu RST_BUS_IR1>;
 736                         status = "disabled";
 737                 };
 738
 739                 ths: thermal-sensor@1c24c00 {
 740                         compatible = "allwinner,sun8i-r40-ths";
 741                         reg = <0x01c24c00 0x100>;
 742                         clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
 743                         clock-names = "bus", "mod";
 744                         interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 745                         resets = <&ccu RST_BUS_THS>;
 746                         /* TODO: add nvmem-cells for calibration */
 747                         #thermal-sensor-cells = <1>;
 748                 };
 749
 750                 uart0: serial@1c28000 {
 751                         compatible = "snps,dw-apb-uart";
 752                         reg = <0x01c28000 0x400>;
 753                         interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 754                         reg-shift = <2>;
 755                         reg-io-width = <4>;
 756                         clocks = <&ccu CLK_BUS_UART0>;
 757                         resets = <&ccu RST_BUS_UART0>;
 758                         status = "disabled";
 759                 };
 760
 761                 uart1: serial@1c28400 {
 762                         compatible = "snps,dw-apb-uart";
 763                         reg = <0x01c28400 0x400>;
 764                         interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 765                         reg-shift = <2>;
 766                         reg-io-width = <4>;
 767                         clocks = <&ccu CLK_BUS_UART1>;
 768                         resets = <&ccu RST_BUS_UART1>;
 769                         status = "disabled";
 770                 };
 771
 772                 uart2: serial@1c28800 {
 773                         compatible = "snps,dw-apb-uart";
 774                         reg = <0x01c28800 0x400>;
 775                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 776                         reg-shift = <2>;
 777                         reg-io-width = <4>;
 778                         clocks = <&ccu CLK_BUS_UART2>;
 779                         resets = <&ccu RST_BUS_UART2>;
 780                         status = "disabled";
 781                 };
 782
 783                 uart3: serial@1c28c00 {
 784                         compatible = "snps,dw-apb-uart";
 785                         reg = <0x01c28c00 0x400>;
 786                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 787                         reg-shift = <2>;
 788                         reg-io-width = <4>;
 789                         clocks = <&ccu CLK_BUS_UART3>;
 790                         resets = <&ccu RST_BUS_UART3>;
 791                         status = "disabled";
 792                 };
 793
 794                 uart4: serial@1c29000 {
 795                         compatible = "snps,dw-apb-uart";
 796                         reg = <0x01c29000 0x400>;
 797                         interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 798                         reg-shift = <2>;
 799                         reg-io-width = <4>;
 800                         clocks = <&ccu CLK_BUS_UART4>;
 801                         resets = <&ccu RST_BUS_UART4>;
 802                         status = "disabled";
 803                 };
 804
 805                 uart5: serial@1c29400 {
 806                         compatible = "snps,dw-apb-uart";
 807                         reg = <0x01c29400 0x400>;
 808                         interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 809                         reg-shift = <2>;
 810                         reg-io-width = <4>;
 811                         clocks = <&ccu CLK_BUS_UART5>;
 812                         resets = <&ccu RST_BUS_UART5>;
 813                         status = "disabled";
 814                 };
 815
 816                 uart6: serial@1c29800 {
 817                         compatible = "snps,dw-apb-uart";
 818                         reg = <0x01c29800 0x400>;
 819                         interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 820                         reg-shift = <2>;
 821                         reg-io-width = <4>;
 822                         clocks = <&ccu CLK_BUS_UART6>;
 823                         resets = <&ccu RST_BUS_UART6>;
 824                         status = "disabled";
 825                 };
 826
 827                 uart7: serial@1c29c00 {
 828                         compatible = "snps,dw-apb-uart";
 829                         reg = <0x01c29c00 0x400>;
 830                         interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 831                         reg-shift = <2>;
 832                         reg-io-width = <4>;
 833                         clocks = <&ccu CLK_BUS_UART7>;
 834                         resets = <&ccu RST_BUS_UART7>;
 835                         status = "disabled";
 836                 };
 837
 838                 i2c0: i2c@1c2ac00 {
 839                         compatible = "allwinner,sun6i-a31-i2c";
 840                         reg = <0x01c2ac00 0x400>;
 841                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 842                         clocks = <&ccu CLK_BUS_I2C0>;
 843                         resets = <&ccu RST_BUS_I2C0>;
 844                         pinctrl-0 = <&i2c0_pins>;
 845                         pinctrl-names = "default";
 846                         status = "disabled";
 847                         #address-cells = <1>;
 848                         #size-cells = <0>;
 849                 };
 850
 851                 i2c1: i2c@1c2b000 {
 852                         compatible = "allwinner,sun6i-a31-i2c";
 853                         reg = <0x01c2b000 0x400>;
 854                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 855                         clocks = <&ccu CLK_BUS_I2C1>;
 856                         resets = <&ccu RST_BUS_I2C1>;
 857                         pinctrl-0 = <&i2c1_pins>;
 858                         pinctrl-names = "default";
 859                         status = "disabled";
 860                         #address-cells = <1>;
 861                         #size-cells = <0>;
 862                 };
 863
 864                 i2c2: i2c@1c2b400 {
 865                         compatible = "allwinner,sun6i-a31-i2c";
 866                         reg = <0x01c2b400 0x400>;
 867                         interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 868                         clocks = <&ccu CLK_BUS_I2C2>;
 869                         resets = <&ccu RST_BUS_I2C2>;
 870                         pinctrl-0 = <&i2c2_pins>;
 871                         pinctrl-names = "default";
 872                         status = "disabled";
 873                         #address-cells = <1>;
 874                         #size-cells = <0>;
 875                 };
 876
 877                 i2c3: i2c@1c2b800 {
 878                         compatible = "allwinner,sun6i-a31-i2c";
 879                         reg = <0x01c2b800 0x400>;
 880                         interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 881                         clocks = <&ccu CLK_BUS_I2C3>;
 882                         resets = <&ccu RST_BUS_I2C3>;
 883                         pinctrl-0 = <&i2c3_pins>;
 884                         pinctrl-names = "default";
 885                         status = "disabled";
 886                         #address-cells = <1>;
 887                         #size-cells = <0>;
 888                 };
 889
 890                 i2c4: i2c@1c2c000 {
 891                         compatible = "allwinner,sun6i-a31-i2c";
 892                         reg = <0x01c2c000 0x400>;
 893                         interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 894                         clocks = <&ccu CLK_BUS_I2C4>;
 895                         resets = <&ccu RST_BUS_I2C4>;
 896                         pinctrl-0 = <&i2c4_pins>;
 897                         pinctrl-names = "default";
 898                         status = "disabled";
 899                         #address-cells = <1>;
 900                         #size-cells = <0>;
 901                 };
 902
 903                 mali: gpu@1c40000 {
 904                         compatible = "allwinner,sun8i-r40-mali", "arm,mali-400";
 905                         reg = <0x01c40000 0x10000>;
 906                         interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
 907                                      <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 908                                      <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
 909                                      <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 910                                      <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 911                                      <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
 912                                      <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 913                         interrupt-names = "gp",
 914                                           "gpmmu",
 915                                           "pp0",
 916                                           "ppmmu0",
 917                                           "pp1",
 918                                           "ppmmu1",
 919                                           "pmu";
 920                         clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
 921                         clock-names = "bus", "core";
 922                         resets = <&ccu RST_BUS_GPU>;
 923                 };
 924
 925                 gmac: ethernet@1c50000 {
 926                         compatible = "allwinner,sun8i-r40-gmac";
 927                         syscon = <&ccu>;
 928                         reg = <0x01c50000 0x10000>;
 929                         interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 930                         interrupt-names = "macirq";
 931                         resets = <&ccu RST_BUS_GMAC>;
 932                         reset-names = "stmmaceth";
 933                         clocks = <&ccu CLK_BUS_GMAC>;
 934                         clock-names = "stmmaceth";
 935                         status = "disabled";
 936
 937                         gmac_mdio: mdio {
 938                                 compatible = "snps,dwmac-mdio";
 939                                 #address-cells = <1>;
 940                                 #size-cells = <0>;
 941                         };
 942                 };
 943
 944                 mbus: dram-controller@1c62000 {
 945                         compatible = "allwinner,sun8i-r40-mbus";
 946                         reg = <0x01c62000 0x1000>;
 947                         clocks = <&ccu 155>;
 948                         #address-cells = <1>;
 949                         #size-cells = <1>;
 950                         dma-ranges = <0x00000000 0x40000000 0x80000000>;
 951                         #interconnect-cells = <1>;
 952                 };
 953
 954                 tcon_top: tcon-top@1c70000 {
 955                         compatible = "allwinner,sun8i-r40-tcon-top";
 956                         reg = <0x01c70000 0x1000>;
 957                         clocks = <&ccu CLK_BUS_TCON_TOP>,
 958                                  <&ccu CLK_TCON_TV0>,
 959                                  <&ccu CLK_TVE0>,
 960                                  <&ccu CLK_TCON_TV1>,
 961                                  <&ccu CLK_TVE1>,
 962                                  <&ccu CLK_DSI_DPHY>;
 963                         clock-names = "bus",
 964                                       "tcon-tv0",
 965                                       "tve0",
 966                                       "tcon-tv1",
 967                                       "tve1",
 968                                       "dsi";
 969                         clock-output-names = "tcon-top-tv0",
 970                                              "tcon-top-tv1",
 971                                              "tcon-top-dsi";
 972                         resets = <&ccu RST_BUS_TCON_TOP>;
 973                         #clock-cells = <1>;
 974
 975                         ports {
 976                                 #address-cells = <1>;
 977                                 #size-cells = <0>;
 978
 979                                 tcon_top_mixer0_in: port@0 {
 980                                         reg = <0>;
 981
 982                                         tcon_top_mixer0_in_mixer0: endpoint {
 983                                                 remote-endpoint = <&mixer0_out_tcon_top>;
 984                                         };
 985                                 };
 986
 987                                 tcon_top_mixer0_out: port@1 {
 988                                         #address-cells = <1>;
 989                                         #size-cells = <0>;
 990                                         reg = <1>;
 991
 992                                         tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
 993                                                 reg = <0>;
 994                                         };
 995
 996                                         tcon_top_mixer0_out_tcon_lcd1: endpoint@1 {
 997                                                 reg = <1>;
 998                                         };
 999
1000                                         tcon_top_mixer0_out_tcon_tv0: endpoint@2 {
1001                                                 reg = <2>;
1002                                                 remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>;
1003                                         };
1004
1005                                         tcon_top_mixer0_out_tcon_tv1: endpoint@3 {
1006                                                 reg = <3>;
1007                                                 remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>;
1008                                         };
1009                                 };
1010
1011                                 tcon_top_mixer1_in: port@2 {
1012                                         #address-cells = <1>;
1013                                         #size-cells = <0>;
1014                                         reg = <2>;
1015
1016                                         tcon_top_mixer1_in_mixer1: endpoint@1 {
1017                                                 reg = <1>;
1018                                                 remote-endpoint = <&mixer1_out_tcon_top>;
1019                                         };
1020                                 };
1021
1022                                 tcon_top_mixer1_out: port@3 {
1023                                         #address-cells = <1>;
1024                                         #size-cells = <0>;
1025                                         reg = <3>;
1026
1027                                         tcon_top_mixer1_out_tcon_lcd0: endpoint@0 {
1028                                                 reg = <0>;
1029                                         };
1030
1031                                         tcon_top_mixer1_out_tcon_lcd1: endpoint@1 {
1032                                                 reg = <1>;
1033                                         };
1034
1035                                         tcon_top_mixer1_out_tcon_tv0: endpoint@2 {
1036                                                 reg = <2>;
1037                                                 remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>;
1038                                         };
1039
1040                                         tcon_top_mixer1_out_tcon_tv1: endpoint@3 {
1041                                                 reg = <3>;
1042                                                 remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>;
1043                                         };
1044                                 };
1045
1046                                 tcon_top_hdmi_in: port@4 {
1047                                         #address-cells = <1>;
1048                                         #size-cells = <0>;
1049                                         reg = <4>;
1050
1051                                         tcon_top_hdmi_in_tcon_tv0: endpoint@0 {
1052                                                 reg = <0>;
1053                                                 remote-endpoint = <&tcon_tv0_out_tcon_top>;
1054                                         };
1055
1056                                         tcon_top_hdmi_in_tcon_tv1: endpoint@1 {
1057                                                 reg = <1>;
1058                                                 remote-endpoint = <&tcon_tv1_out_tcon_top>;
1059                                         };
1060                                 };
1061
1062                                 tcon_top_hdmi_out: port@5 {
1063                                         reg = <5>;
1064
1065                                         tcon_top_hdmi_out_hdmi: endpoint {
1066                                                 remote-endpoint = <&hdmi_in_tcon_top>;
1067                                         };
1068                                 };
1069                         };
1070                 };
1071
1072                 tcon_tv0: lcd-controller@1c73000 {
1073                         compatible = "allwinner,sun8i-r40-tcon-tv";
1074                         reg = <0x01c73000 0x1000>;
1075                         interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
1076                         clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top CLK_TCON_TOP_TV0>;
1077                         clock-names = "ahb", "tcon-ch1";
1078                         resets = <&ccu RST_BUS_TCON_TV0>;
1079                         reset-names = "lcd";
1080                         status = "disabled";
1081
1082                         ports {
1083                                 #address-cells = <1>;
1084                                 #size-cells = <0>;
1085
1086                                 tcon_tv0_in: port@0 {
1087                                         #address-cells = <1>;
1088                                         #size-cells = <0>;
1089                                         reg = <0>;
1090
1091                                         tcon_tv0_in_tcon_top_mixer0: endpoint@0 {
1092                                                 reg = <0>;
1093                                                 remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;
1094                                         };
1095
1096                                         tcon_tv0_in_tcon_top_mixer1: endpoint@1 {
1097                                                 reg = <1>;
1098                                                 remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>;
1099                                         };
1100                                 };
1101
1102                                 tcon_tv0_out: port@1 {
1103                                         #address-cells = <1>;
1104                                         #size-cells = <0>;
1105                                         reg = <1>;
1106
1107                                         tcon_tv0_out_tcon_top: endpoint@1 {
1108                                                 reg = <1>;
1109                                                 remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;
1110                                         };
1111                                 };
1112                         };
1113                 };
1114
1115                 tcon_tv1: lcd-controller@1c74000 {
1116                         compatible = "allwinner,sun8i-r40-tcon-tv";
1117                         reg = <0x01c74000 0x1000>;
1118                         interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
1119                         clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top CLK_TCON_TOP_TV1>;
1120                         clock-names = "ahb", "tcon-ch1";
1121                         resets = <&ccu RST_BUS_TCON_TV1>;
1122                         reset-names = "lcd";
1123                         status = "disabled";
1124
1125                         ports {
1126                                 #address-cells = <1>;
1127                                 #size-cells = <0>;
1128
1129                                 tcon_tv1_in: port@0 {
1130                                         #address-cells = <1>;
1131                                         #size-cells = <0>;
1132                                         reg = <0>;
1133
1134                                         tcon_tv1_in_tcon_top_mixer0: endpoint@0 {
1135                                                 reg = <0>;
1136                                                 remote-endpoint = <&tcon_top_mixer0_out_tcon_tv1>;
1137                                         };
1138
1139                                         tcon_tv1_in_tcon_top_mixer1: endpoint@1 {
1140                                                 reg = <1>;
1141                                                 remote-endpoint = <&tcon_top_mixer1_out_tcon_tv1>;
1142                                         };
1143                                 };
1144
1145                                 tcon_tv1_out: port@1 {
1146                                         #address-cells = <1>;
1147                                         #size-cells = <0>;
1148                                         reg = <1>;
1149
1150                                         tcon_tv1_out_tcon_top: endpoint@1 {
1151                                                 reg = <1>;
1152                                                 remote-endpoint = <&tcon_top_hdmi_in_tcon_tv1>;
1153                                         };
1154                                 };
1155                         };
1156                 };
1157
1158                 gic: interrupt-controller@1c81000 {
1159                         compatible = "arm,gic-400";
1160                         reg = <0x01c81000 0x1000>,
1161                               <0x01c82000 0x2000>,
1162                               <0x01c84000 0x2000>,
1163                               <0x01c86000 0x2000>;
1164                         interrupt-controller;
1165                         #interrupt-cells = <3>;
1166                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
1167                 };
1168
1169                 hdmi: hdmi@1ee0000 {
1170                         compatible = "allwinner,sun8i-r40-dw-hdmi",
1171                                      "allwinner,sun8i-a83t-dw-hdmi";
1172                         reg = <0x01ee0000 0x10000>;
1173                         reg-io-width = <1>;
1174                         interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
1175                         clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>,
1176                                  <&ccu CLK_HDMI>;
1177                         clock-names = "iahb", "isfr", "tmds";
1178                         resets = <&ccu RST_BUS_HDMI1>;
1179                         reset-names = "ctrl";
1180                         phys = <&hdmi_phy>;
1181                         phy-names = "phy";
1182                         status = "disabled";
1183
1184                         ports {
1185                                 #address-cells = <1>;
1186                                 #size-cells = <0>;
1187
1188                                 hdmi_in: port@0 {
1189                                         reg = <0>;
1190
1191                                         hdmi_in_tcon_top: endpoint {
1192                                                 remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
1193                                         };
1194                                 };
1195
1196                                 hdmi_out: port@1 {
1197                                         reg = <1>;
1198                                 };
1199                         };
1200                 };
1201
1202                 hdmi_phy: hdmi-phy@1ef0000 {
1203                         compatible = "allwinner,sun8i-r40-hdmi-phy";
1204                         reg = <0x01ef0000 0x10000>;
1205                         clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
1206                                  <&ccu CLK_PLL_VIDEO0>, <&ccu CLK_PLL_VIDEO1>;
1207                         clock-names = "bus", "mod", "pll-0", "pll-1";
1208                         resets = <&ccu RST_BUS_HDMI0>;
1209                         reset-names = "phy";
1210                         #phy-cells = <0>;
1211                 };
1212         };
1213
1214         pmu {
1215                 compatible = "arm,cortex-a7-pmu";
1216                 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
1217                              <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
1218                              <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
1219                              <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
1220                 interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
1221         };
1222
1223         timer {
1224                 compatible = "arm,armv7-timer";
1225                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
1226                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
1227                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
1228                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
1229         };
1230 };