arch/arm/boot/dts/sun6i-a31-hummingbird.dts

   1 /*
   2  * Copyright 2014 Maxime Ripard
   3  *
   4  * Maxime Ripard <maxime.ripard@free-electrons.com>
   5  *
   6  * This file is dual-licensed: you can use it either under the terms
   7  * of the GPL or the X11 license, at your option. Note that this dual
   8  * licensing only applies to this file, and not this project as a
   9  * whole.
  10  *
  11  *  a) This file is free software; you can redistribute it and/or
  12  *     modify it under the terms of the GNU General Public License as
  13  *     published by the Free Software Foundation; either version 2 of the
  14  *     License, or (at your option) any later version.
  15  *
  16  *     This file is distributed in the hope that it will be useful,
  17  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  *     GNU General Public License for more details.
  20  *
  21  * Or, alternatively,
  22  *
  23  *  b) Permission is hereby granted, free of charge, to any person
  24  *     obtaining a copy of this software and associated documentation
  25  *     files (the "Software"), to deal in the Software without
  26  *     restriction, including without limitation the rights to use,
  27  *     copy, modify, merge, publish, distribute, sublicense, and/or
  28  *     sell copies of the Software, and to permit persons to whom the
  29  *     Software is furnished to do so, subject to the following
  30  *     conditions:
  31  *
  32  *     The above copyright notice and this permission notice shall be
  33  *     included in all copies or substantial portions of the Software.
  34  *
  35  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  36  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  37  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  38  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  39  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  40  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  41  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  42  *     OTHER DEALINGS IN THE SOFTWARE.
  43  */
  44
  45 /dts-v1/;
  46 #include "sun6i-a31.dtsi"
  47 #include "sunxi-common-regulators.dtsi"
  48
  49 #include <dt-bindings/gpio/gpio.h>
  50
  51 / {
  52         model = "Merrii A31 Hummingbird";
  53         compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";
  54
  55         aliases {
  56                 rtc0 = &pcf8563;
  57                 rtc1 = &rtc;
  58                 serial0 = &uart0;
  59         };
  60
  61         chosen {
  62                 stdout-path = "serial0:115200n8";
  63         };
  64
  65         hdmi-connector {
  66                 compatible = "hdmi-connector";
  67                 type = "a";
  68
  69                 port {
  70                         hdmi_con_in: endpoint {
  71                                 remote-endpoint = <&hdmi_out_con>;
  72                         };
  73                 };
  74         };
  75
  76         vga-connector {
  77                 compatible = "vga-connector";
  78
  79                 port {
  80                         vga_con_in: endpoint {
  81                                 remote-endpoint = <&vga_dac_out>;
  82                         };
  83                 };
  84         };
  85
  86         vga-dac {
  87                 compatible = "dumb-vga-dac";
  88                 vdd-supply = <&reg_vga_3v3>;
  89
  90                 ports {
  91                         #address-cells = <1>;
  92                         #size-cells = <0>;
  93
  94                         port@0 {
  95                                 reg = <0>;
  96
  97                                 vga_dac_in: endpoint {
  98                                         remote-endpoint = <&tcon0_out_vga>;
  99                                 };
 100                         };
 101
 102                         port@1 {
 103                                 reg = <1>;
 104
 105                                 vga_dac_out: endpoint {
 106                                         remote-endpoint = <&vga_con_in>;
 107                                 };
 108                         };
 109                 };
 110         };
 111
 112         reg_vga_3v3: vga_3v3_regulator {
 113                 compatible = "regulator-fixed";
 114                 regulator-name = "vga-3v3";
 115                 regulator-min-microvolt = <3300000>;
 116                 regulator-max-microvolt = <3300000>;
 117                 regulator-boot-on;
 118                 enable-active-high;
 119                 gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
 120         };
 121
 122         wifi_pwrseq: wifi_pwrseq {
 123                 compatible = "mmc-pwrseq-simple";
 124                 reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
 125         };
 126 };
 127
 128 &codec {
 129         allwinner,audio-routing =
 130                 "Headphone", "HP",
 131                 "Speaker", "LINEOUT",
 132                 "LINEIN", "Line In",
 133                 "MIC1", "Mic",
 134                 "MIC2", "Headset Mic",
 135                 "Mic",  "MBIAS",
 136                 "Headset Mic", "HBIAS";
 137         allwinner,pa-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
 138         status = "okay";
 139 };
 140
 141 &cpu0 {
 142         cpu-supply = <&reg_dcdc3>;
 143 };
 144
 145 &de {
 146         status = "okay";
 147 };
 148
 149 &ehci0 {
 150         status = "okay";
 151 };
 152
 153 &gmac {
 154         pinctrl-names = "default";
 155         pinctrl-0 = <&gmac_rgmii_pins>;
 156         phy-handle = <&phy1>;
 157         phy-mode = "rgmii-id";
 158         status = "okay";
 159 };
 160
 161 &hdmi {
 162         status = "okay";
 163 };
 164
 165 &hdmi_out {
 166         hdmi_out_con: endpoint {
 167                 remote-endpoint = <&hdmi_con_in>;
 168         };
 169 };
 170
 171 &i2c0 {
 172         /* pull-ups and devices require AXP221 DLDO3 */
 173         status = "failed";
 174 };
 175
 176 &i2c1 {
 177         status = "okay";
 178 };
 179
 180 &i2c2 {
 181         status = "okay";
 182
 183         pcf8563: rtc@51 {
 184                 compatible = "nxp,pcf8563";
 185                 reg = <0x51>;
 186         };
 187 };
 188
 189 &ir {
 190         pinctrl-names = "default";
 191         pinctrl-0 = <&s_ir_rx_pin>;
 192         status = "okay";
 193 };
 194
 195 &mdio {
 196         phy1: ethernet-phy@1 {
 197                 reg = <1>;
 198                 reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>;
 199                 reset-assert-us = <10000>;
 200                 reset-deassert-us = <30000>;
 201         };
 202 };
 203
 204 &mmc0 {
 205         vmmc-supply = <&reg_dcdc1>;
 206         bus-width = <4>;
 207         cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
 208         status = "okay";
 209 };
 210
 211 &mmc1 {
 212         vmmc-supply = <&reg_aldo1>;
 213         mmc-pwrseq = <&wifi_pwrseq>;
 214         bus-width = <4>;
 215         non-removable;
 216         status = "okay";
 217 };
 218
 219 &ohci0 {
 220         status = "okay";
 221 };
 222
 223 &p2wi {
 224         status = "okay";
 225
 226         axp22x: pmic@68 {
 227                 compatible = "x-powers,axp221";
 228                 reg = <0x68>;
 229                 interrupt-parent = <&nmi_intc>;
 230                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 231                 x-powers,drive-vbus-en;
 232         };
 233 };
 234
 235 #include "axp22x.dtsi"
 236
 237 &ac_power_supply {
 238         status = "okay";
 239 };
 240
 241 &reg_aldo1 {
 242         regulator-min-microvolt = <3300000>;
 243         regulator-max-microvolt = <3300000>;
 244         regulator-name = "vcc-wifi";
 245 };
 246
 247 &reg_aldo3 {
 248         regulator-always-on;
 249         regulator-min-microvolt = <2700000>;
 250         regulator-max-microvolt = <3300000>;
 251         regulator-name = "avcc";
 252 };
 253
 254 &reg_dc5ldo {
 255         regulator-min-microvolt = <700000>;
 256         regulator-max-microvolt = <1320000>;
 257         regulator-name = "vdd-cpus";
 258 };
 259
 260 &reg_dcdc1 {
 261         regulator-always-on;
 262         regulator-min-microvolt = <3000000>;
 263         regulator-max-microvolt = <3000000>;
 264         regulator-name = "vcc-3v0";
 265 };
 266
 267 &reg_dcdc2 {
 268         regulator-min-microvolt = <700000>;
 269         regulator-max-microvolt = <1320000>;
 270         regulator-name = "vdd-gpu";
 271 };
 272
 273 &reg_dcdc3 {
 274         regulator-always-on;
 275         regulator-min-microvolt = <700000>;
 276         regulator-max-microvolt = <1320000>;
 277         regulator-name = "vdd-cpu";
 278 };
 279
 280 &reg_dcdc4 {
 281         regulator-always-on;
 282         regulator-min-microvolt = <700000>;
 283         regulator-max-microvolt = <1320000>;
 284         regulator-name = "vdd-sys-dll";
 285 };
 286
 287 &reg_dcdc5 {
 288         regulator-always-on;
 289         regulator-min-microvolt = <1500000>;
 290         regulator-max-microvolt = <1500000>;
 291         regulator-name = "vcc-dram";
 292 };
 293
 294 &reg_drivevbus {
 295         regulator-name = "usb0-vbus";
 296         status = "okay";
 297 };
 298
 299 &reg_usb1_vbus {
 300         gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
 301         status = "okay";
 302 };
 303
 304 &tcon0 {
 305         pinctrl-names = "default";
 306         pinctrl-0 = <&lcd0_rgb888_pins>;
 307 };
 308
 309 &tcon0_out {
 310         tcon0_out_vga: endpoint@0 {
 311                 reg = <0>;
 312                 remote-endpoint = <&vga_dac_in>;
 313         };
 314 };
 315
 316 &uart0 {
 317         pinctrl-names = "default";
 318         pinctrl-0 = <&uart0_ph_pins>;
 319         status = "okay";
 320 };
 321
 322 &usb_otg {
 323         dr_mode = "otg";
 324         status = "okay";
 325 };
 326
 327 &usb_power_supply {
 328         status = "okay";
 329 };
 330
 331 &usbphy {
 332         usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
 333         usb0_vbus_det-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
 334         usb0_vbus_power-supply = <&usb_power_supply>;
 335         usb0_vbus-supply = <&reg_drivevbus>;
 336         usb1_vbus-supply = <&reg_usb1_vbus>;
 337         status = "okay";
 338 };