arch/arm/boot/dts/ste-href.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Copyright 2012 ST-Ericsson AB
   4  */
   5
   6 #include <dt-bindings/interrupt-controller/irq.h>
   7 #include <dt-bindings/leds/common.h>
   8 #include "ste-href-family-pinctrl.dtsi"
   9
  10 / {
  11         memory {
  12                 device_type = "memory";
  13                 reg = <0x00000000 0x20000000>;
  14         };
  15
  16         soc {
  17                 uart@80120000 {
  18                         pinctrl-names = "default", "sleep";
  19                         pinctrl-0 = <&u0_a_1_default>;
  20                         pinctrl-1 = <&u0_a_1_sleep>;
  21                         status = "okay";
  22                 };
  23
  24                 /* This UART is unused and thus left disabled */
  25                 uart@80121000 {
  26                         pinctrl-names = "default", "sleep";
  27                         pinctrl-0 = <&u1rxtx_a_1_default>;
  28                         pinctrl-1 = <&u1rxtx_a_1_sleep>;
  29                 };
  30
  31                 uart@80007000 {
  32                         pinctrl-names = "default", "sleep";
  33                         pinctrl-0 = <&u2rxtx_c_1_default>;
  34                         pinctrl-1 = <&u2rxtx_c_1_sleep>;
  35                         status = "okay";
  36                 };
  37
  38                 i2c@80004000 {
  39                         pinctrl-names = "default","sleep";
  40                         pinctrl-0 = <&i2c0_a_1_default>;
  41                         pinctrl-1 = <&i2c0_a_1_sleep>;
  42                         status = "okay";
  43                 };
  44
  45                 i2c@80122000 {
  46                         pinctrl-names = "default","sleep";
  47                         pinctrl-0 = <&i2c1_b_2_default>;
  48                         pinctrl-1 = <&i2c1_b_2_sleep>;
  49                         status = "okay";
  50                 };
  51
  52                 i2c@80128000 {
  53                         pinctrl-names = "default","sleep";
  54                         pinctrl-0 = <&i2c2_b_2_default>;
  55                         pinctrl-1 = <&i2c2_b_2_sleep>;
  56                         status = "okay";
  57                         lp5521@33 {
  58                                 compatible = "national,lp5521";
  59                                 reg = <0x33>;
  60                                 label = "lp5521_pri";
  61                                 clock-mode = /bits/ 8 <2>;
  62                                 #address-cells = <1>;
  63                                 #size-cells = <0>;
  64                                 chan@0 {
  65                                         reg = <0>;
  66                                         led-cur = /bits/ 8 <0x2f>;
  67                                         max-cur = /bits/ 8 <0x5f>;
  68                                         color = <LED_COLOR_ID_BLUE>;
  69                                         linux,default-trigger = "heartbeat";
  70                                 };
  71                                 chan@1 {
  72                                         reg = <1>;
  73                                         led-cur = /bits/ 8 <0x2f>;
  74                                         max-cur = /bits/ 8 <0x5f>;
  75                                         color = <LED_COLOR_ID_BLUE>;
  76                                 };
  77                                 chan@2 {
  78                                         reg = <2>;
  79                                         led-cur = /bits/ 8 <0x2f>;
  80                                         max-cur = /bits/ 8 <0x5f>;
  81                                         color = <LED_COLOR_ID_BLUE>;
  82                                 };
  83                         };
  84                         lp5521@34 {
  85                                 compatible = "national,lp5521";
  86                                 reg = <0x34>;
  87                                 label = "lp5521_sec";
  88                                 clock-mode = /bits/ 8 <2>;
  89                                 #address-cells = <1>;
  90                                 #size-cells = <0>;
  91                                 chan@0 {
  92                                         reg = <0>;
  93                                         led-cur = /bits/ 8 <0x2f>;
  94                                         max-cur = /bits/ 8 <0x5f>;
  95                                         color = <LED_COLOR_ID_BLUE>;
  96                                 };
  97                                 chan@1 {
  98                                         reg = <1>;
  99                                         led-cur = /bits/ 8 <0x2f>;
 100                                         max-cur = /bits/ 8 <0x5f>;
 101                                         color = <LED_COLOR_ID_BLUE>;
 102                                 };
 103                                 chan@2 {
 104                                         reg = <2>;
 105                                         led-cur = /bits/ 8 <0x2f>;
 106                                         max-cur = /bits/ 8 <0x5f>;
 107                                         color = <LED_COLOR_ID_BLUE>;
 108                                 };
 109                         };
 110                         bh1780@29 {
 111                                 compatible = "rohm,bh1780gli";
 112                                 reg = <0x29>;
 113                         };
 114                 };
 115
 116                 i2c@80110000 {
 117                         pinctrl-names = "default","sleep";
 118                         pinctrl-0 = <&i2c3_c_2_default>;
 119                         pinctrl-1 = <&i2c3_c_2_sleep>;
 120                         status = "okay";
 121                 };
 122
 123                 // External Micro SD slot
 124                 mmc@80126000 {
 125                         arm,primecell-periphid = <0x10480180>;
 126                         max-frequency = <100000000>;
 127                         bus-width = <4>;
 128                         cap-sd-highspeed;
 129                         cap-mmc-highspeed;
 130                         sd-uhs-sdr12;
 131                         sd-uhs-sdr25;
 132                         full-pwr-cycle;
 133                         st,sig-dir-dat0;
 134                         st,sig-dir-dat2;
 135                         st,sig-dir-cmd;
 136                         st,sig-pin-fbclk;
 137                         vmmc-supply = <&ab8500_ldo_aux3_reg>;
 138                         vqmmc-supply = <&vmmci>;
 139                         pinctrl-names = "default", "sleep";
 140                         pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>;
 141                         pinctrl-1 = <&mc0_a_1_sleep>;
 142
 143                         status = "okay";
 144                 };
 145
 146                 // WLAN SDIO channel
 147                 mmc@80118000 {
 148                         arm,primecell-periphid = <0x10480180>;
 149                         max-frequency = <100000000>;
 150                         bus-width = <4>;
 151                         non-removable;
 152                         pinctrl-names = "default", "sleep";
 153                         pinctrl-0 = <&mc1_a_1_default>;
 154                         pinctrl-1 = <&mc1_a_1_sleep>;
 155
 156                         status = "okay";
 157                 };
 158
 159                 // PoP:ed eMMC
 160                 mmc@80005000 {
 161                         arm,primecell-periphid = <0x10480180>;
 162                         max-frequency = <100000000>;
 163                         bus-width = <8>;
 164                         cap-mmc-highspeed;
 165                         non-removable;
 166                         vmmc-supply = <&db8500_vsmps2_reg>;
 167                         pinctrl-names = "default", "sleep";
 168                         pinctrl-0 = <&mc2_a_1_default>;
 169                         pinctrl-1 = <&mc2_a_1_sleep>;
 170
 171                         status = "okay";
 172                 };
 173
 174                 // On-board eMMC
 175                 mmc@80114000 {
 176                         arm,primecell-periphid = <0x10480180>;
 177                         max-frequency = <100000000>;
 178                         bus-width = <8>;
 179                         cap-mmc-highspeed;
 180                         non-removable;
 181                         vmmc-supply = <&ab8500_ldo_aux2_reg>;
 182                         pinctrl-names = "default", "sleep";
 183                         pinctrl-0 = <&mc4_a_1_default>;
 184                         pinctrl-1 = <&mc4_a_1_sleep>;
 185
 186                         status = "okay";
 187                 };
 188
 189                 msp0: msp@80123000 {
 190                         pinctrl-names = "default";
 191                         pinctrl-0 = <&msp0txrxtfstck_a_1_default>;
 192                         status = "okay";
 193                 };
 194
 195                 msp1: msp@80124000 {
 196                         pinctrl-names = "default";
 197                         pinctrl-0 = <&msp1txrx_a_1_default>;
 198                         status = "okay";
 199                 };
 200
 201                 msp2: msp@80117000 {
 202                         pinctrl-names = "default";
 203                         pinctrl-0 = <&msp2_a_1_default>;
 204                 };
 205
 206                 msp3: msp@80125000 {
 207                         status = "okay";
 208                 };
 209
 210                 prcmu@80157000 {
 211                         ab8500 {
 212                                 ab8500-gpiocontroller {
 213                                 };
 214
 215                                 ab8500_usb {
 216                                         pinctrl-names = "default", "sleep";
 217                                         pinctrl-0 = <&usb_a_1_default>;
 218                                         pinctrl-1 = <&usb_a_1_sleep>;
 219                                 };
 220
 221                                 ab8500-regulators {
 222                                         ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 223                                                 regulator-name = "V-DISPLAY";
 224                                         };
 225
 226                                         ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
 227                                                 regulator-name = "V-eMMC1";
 228                                         };
 229
 230                                         ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
 231                                                 regulator-name = "V-MMC-SD";
 232                                         };
 233
 234                                         ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
 235                                                 regulator-name = "V-INTCORE";
 236                                         };
 237
 238                                         ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
 239                                                 regulator-name = "V-TVOUT";
 240                                         };
 241
 242                                         ab8500_ldo_audio_reg: ab8500_ldo_audio {
 243                                                 regulator-name = "V-AUD";
 244                                         };
 245
 246                                         ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
 247                                                 regulator-name = "V-AMIC1";
 248                                         };
 249
 250                                         ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
 251                                                 regulator-name = "V-AMIC2";
 252                                         };
 253
 254                                         ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
 255                                                 regulator-name = "V-DMIC";
 256                                         };
 257
 258                                         ab8500_ldo_ana_reg: ab8500_ldo_ana {
 259                                                 regulator-name = "V-CSI/DSI";
 260                                         };
 261                                 };
 262                         };
 263                 };
 264
 265                 pinctrl {
 266                         sdi0 {
 267                                 sdi0_default_mode: sdi0_default {
 268                                         /* Some boards set additional settings here */
 269                                 };
 270                         };
 271                 };
 272
 273                 mcde@a0350000 {
 274                         pinctrl-names = "default", "sleep";
 275                         pinctrl-0 = <&lcd_default_mode>;
 276                         pinctrl-1 = <&lcd_sleep_mode>;
 277                 };
 278         };
 279 };