arch/arm/boot/dts/qcom-sdx55.dtsi

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * SDX55 SoC device tree source
   4  *
   5  * Copyright (c) 2018, The Linux Foundation. All rights reserved.
   6  * Copyright (c) 2020, Linaro Ltd.
   7  */
   8
   9 #include <dt-bindings/clock/qcom,gcc-sdx55.h>
  10 #include <dt-bindings/clock/qcom,rpmh.h>
  11 #include <dt-bindings/interconnect/qcom,sdx55.h>
  12 #include <dt-bindings/interrupt-controller/arm-gic.h>
  13 #include <dt-bindings/power/qcom-rpmpd.h>
  14 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
  15
  16 / {
  17         #address-cells = <1>;
  18         #size-cells = <1>;
  19         qcom,msm-id = <357 0x10000>, <368 0x10000>, <418 0x10000>;
  20         interrupt-parent = <&intc>;
  21
  22         memory {
  23                 device_type = "memory";
  24                 reg = <0 0>;
  25         };
  26
  27         clocks {
  28                 xo_board: xo-board {
  29                         compatible = "fixed-clock";
  30                         #clock-cells = <0>;
  31                         clock-frequency = <38400000>;
  32                         clock-output-names = "xo_board";
  33                 };
  34
  35                 sleep_clk: sleep-clk {
  36                         compatible = "fixed-clock";
  37                         #clock-cells = <0>;
  38                         clock-frequency = <32000>;
  39                 };
  40
  41                 nand_clk_dummy: nand-clk-dummy {
  42                         compatible = "fixed-clock";
  43                         #clock-cells = <0>;
  44                         clock-frequency = <32000>;
  45                 };
  46         };
  47
  48         cpus {
  49                 #address-cells = <1>;
  50                 #size-cells = <0>;
  51
  52                 cpu0: cpu@0 {
  53                         device_type = "cpu";
  54                         compatible = "arm,cortex-a7";
  55                         reg = <0x0>;
  56                         enable-method = "psci";
  57                         clocks = <&apcs>;
  58                         power-domains = <&rpmhpd SDX55_CX>;
  59                         power-domain-names = "rpmhpd";
  60                         operating-points-v2 = <&cpu_opp_table>;
  61                 };
  62         };
  63
  64         cpu_opp_table: cpu-opp-table {
  65                 compatible = "operating-points-v2";
  66                 opp-shared;
  67
  68                 opp-345600000 {
  69                         opp-hz = /bits/ 64 <345600000>;
  70                         required-opps = <&rpmhpd_opp_low_svs>;
  71                 };
  72
  73                 opp-576000000 {
  74                         opp-hz = /bits/ 64 <576000000>;
  75                         required-opps = <&rpmhpd_opp_svs>;
  76                 };
  77
  78                 opp-1094400000 {
  79                         opp-hz = /bits/ 64 <1094400000>;
  80                         required-opps = <&rpmhpd_opp_nom>;
  81                 };
  82
  83                 opp-1555200000 {
  84                         opp-hz = /bits/ 64 <1555200000>;
  85                         required-opps = <&rpmhpd_opp_turbo>;
  86                 };
  87         };
  88
  89         firmware {
  90                 scm {
  91                         compatible = "qcom,scm-sdx55", "qcom,scm";
  92                 };
  93         };
  94
  95         psci {
  96                 compatible = "arm,psci-1.0";
  97                 method = "smc";
  98         };
  99
 100         reserved-memory {
 101                 #address-cells = <1>;
 102                 #size-cells = <1>;
 103                 ranges;
 104
 105                 hyp_mem: memory@8fc00000 {
 106                         no-map;
 107                         reg = <0x8fc00000 0x80000>;
 108                 };
 109
 110                 ac_db_mem: memory@8fc80000 {
 111                         no-map;
 112                         reg = <0x8fc80000 0x40000>;
 113                 };
 114
 115                 secdata_mem: memory@8fcfd000 {
 116                         no-map;
 117                         reg = <0x8fcfd000 0x1000>;
 118                 };
 119
 120                 sbl_mem: memory@8fd00000 {
 121                         no-map;
 122                         reg = <0x8fd00000 0x100000>;
 123                 };
 124
 125                 aop_image: memory@8fe00000 {
 126                         no-map;
 127                         reg = <0x8fe00000 0x20000>;
 128                 };
 129
 130                 aop_cmd_db: memory@8fe20000 {
 131                         compatible = "qcom,cmd-db";
 132                         reg = <0x8fe20000 0x20000>;
 133                         no-map;
 134                 };
 135
 136                 smem_mem: memory@8fe40000 {
 137                         no-map;
 138                         reg = <0x8fe40000 0xc0000>;
 139                 };
 140
 141                 tz_mem: memory@8ff00000 {
 142                         no-map;
 143                         reg = <0x8ff00000 0x100000>;
 144                 };
 145
 146                 tz_apps_mem: memory@90000000 {
 147                         no-map;
 148                         reg = <0x90000000 0x500000>;
 149                 };
 150         };
 151
 152         smem {
 153                 compatible = "qcom,smem";
 154                 memory-region = <&smem_mem>;
 155                 hwlocks = <&tcsr_mutex 3>;
 156         };
 157
 158         smp2p-mpss {
 159                 compatible = "qcom,smp2p";
 160                 qcom,smem = <435>, <428>;
 161                 interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
 162                 mboxes = <&apcs 14>;
 163                 qcom,local-pid = <0>;
 164                 qcom,remote-pid = <1>;
 165
 166                 modem_smp2p_out: master-kernel {
 167                         qcom,entry-name = "master-kernel";
 168                         #qcom,smem-state-cells = <1>;
 169                 };
 170
 171                 modem_smp2p_in: slave-kernel {
 172                         qcom,entry-name = "slave-kernel";
 173                         interrupt-controller;
 174                         #interrupt-cells = <2>;
 175                 };
 176
 177                 ipa_smp2p_out: ipa-ap-to-modem {
 178                         qcom,entry-name = "ipa";
 179                         #qcom,smem-state-cells = <1>;
 180                 };
 181
 182                 ipa_smp2p_in: ipa-modem-to-ap {
 183                         qcom,entry-name = "ipa";
 184                         interrupt-controller;
 185                         #interrupt-cells = <2>;
 186                 };
 187         };
 188
 189         soc: soc {
 190                 #address-cells = <1>;
 191                 #size-cells = <1>;
 192                 ranges;
 193                 compatible = "simple-bus";
 194
 195                 gcc: clock-controller@100000 {
 196                         compatible = "qcom,gcc-sdx55";
 197                         reg = <0x100000 0x1f0000>;
 198                         #clock-cells = <1>;
 199                         #reset-cells = <1>;
 200                         #power-domain-cells = <1>;
 201                         clock-names = "bi_tcxo", "sleep_clk";
 202                         clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
 203                 };
 204
 205                 blsp1_uart3: serial@831000 {
 206                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 207                         reg = <0x00831000 0x200>;
 208                         interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_LOW>;
 209                         clocks = <&gcc 30>,
 210                                  <&gcc 9>;
 211                         clock-names = "core", "iface";
 212                         status = "disabled";
 213                 };
 214
 215                 usb_hsphy: phy@ff4000 {
 216                         compatible = "qcom,usb-snps-hs-7nm-phy";
 217                         reg = <0x00ff4000 0x114>;
 218                         status = "disabled";
 219                         #phy-cells = <0>;
 220
 221                         clocks = <&rpmhcc RPMH_CXO_CLK>;
 222                         clock-names = "ref";
 223
 224                         resets = <&gcc GCC_QUSB2PHY_BCR>;
 225                 };
 226
 227                 usb_qmpphy: phy@ff6000 {
 228                         compatible = "qcom,sdx55-qmp-usb3-uni-phy";
 229                         reg = <0x00ff6000 0x1c0>;
 230                         status = "disabled";
 231                         #clock-cells = <1>;
 232                         #address-cells = <1>;
 233                         #size-cells = <1>;
 234                         ranges;
 235
 236                         clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
 237                                  <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
 238                                  <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
 239                         clock-names = "aux", "cfg_ahb", "ref";
 240
 241                         resets = <&gcc GCC_USB3PHY_PHY_BCR>,
 242                                  <&gcc GCC_USB3_PHY_BCR>;
 243                         reset-names = "phy", "common";
 244
 245                         usb_ssphy: phy@ff6200 {
 246                                 reg = <0x00ff6200 0x170>,
 247                                       <0x00ff6400 0x200>,
 248                                       <0x00ff6800 0x800>;
 249                                 #phy-cells = <0>;
 250                                 #clock-cells = <0>;
 251                                 clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
 252                                 clock-names = "pipe0";
 253                                 clock-output-names = "usb3_uni_phy_pipe_clk_src";
 254                         };
 255                 };
 256
 257                 mc_virt: interconnect@1100000 {
 258                         compatible = "qcom,sdx55-mc-virt";
 259                         reg = <0x01100000 0x400000>;
 260                         #interconnect-cells = <1>;
 261                         qcom,bcm-voters = <&apps_bcm_voter>;
 262                 };
 263
 264                 mem_noc: interconnect@9680000 {
 265                         compatible = "qcom,sdx55-mem-noc";
 266                         reg = <0x09680000 0x40000>;
 267                         #interconnect-cells = <1>;
 268                         qcom,bcm-voters = <&apps_bcm_voter>;
 269                 };
 270
 271                 system_noc: interconnect@162c000 {
 272                         compatible = "qcom,sdx55-system-noc";
 273                         reg = <0x0162c000 0x31200>;
 274                         #interconnect-cells = <1>;
 275                         qcom,bcm-voters = <&apps_bcm_voter>;
 276                 };
 277
 278                 ipa_virt: interconnect@1e00000 {
 279                         compatible = "qcom,sdx55-ipa-virt";
 280                         reg = <0x01e00000 0x100000>;
 281                         #interconnect-cells = <1>;
 282                         qcom,bcm-voters = <&apps_bcm_voter>;
 283                 };
 284
 285                 qpic_bam: dma-controller@1b04000 {
 286                         compatible = "qcom,bam-v1.7.0";
 287                         reg = <0x01b04000 0x1c000>;
 288                         interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
 289                         clocks = <&rpmhcc RPMH_QPIC_CLK>;
 290                         clock-names = "bam_clk";
 291                         #dma-cells = <1>;
 292                         qcom,ee = <0>;
 293                         qcom,controlled-remotely;
 294                         status = "disabled";
 295                 };
 296
 297                 qpic_nand: nand-controller@1b30000 {
 298                         compatible = "qcom,sdx55-nand";
 299                         reg = <0x01b30000 0x10000>;
 300                         #address-cells = <1>;
 301                         #size-cells = <0>;
 302                         clocks = <&rpmhcc RPMH_QPIC_CLK>,
 303                                  <&nand_clk_dummy>;
 304                         clock-names = "core", "aon";
 305
 306                         dmas = <&qpic_bam 0>,
 307                                <&qpic_bam 1>,
 308                                <&qpic_bam 2>;
 309                         dma-names = "tx", "rx", "cmd";
 310                         status = "disabled";
 311                 };
 312
 313                 ipa: ipa@1e40000 {
 314                         compatible = "qcom,sdx55-ipa";
 315
 316                         iommus = <&apps_smmu 0x5e0 0x0>,
 317                                  <&apps_smmu 0x5e2 0x0>;
 318                         reg = <0x1e40000 0x7000>,
 319                               <0x1e50000 0x4b20>,
 320                               <0x1e04000 0x2c000>;
 321                         reg-names = "ipa-reg",
 322                                     "ipa-shared",
 323                                     "gsi";
 324
 325                         interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
 326                                               <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
 327                                               <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
 328                                               <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
 329                         interrupt-names = "ipa",
 330                                           "gsi",
 331                                           "ipa-clock-query",
 332                                           "ipa-setup-ready";
 333
 334                         clocks = <&rpmhcc RPMH_IPA_CLK>;
 335                         clock-names = "core";
 336
 337                         interconnects = <&system_noc MASTER_IPA &system_noc SLAVE_SNOC_MEM_NOC_GC>,
 338                                         <&mem_noc MASTER_SNOC_GC_MEM_NOC &mc_virt SLAVE_EBI_CH0>,
 339                                         <&system_noc MASTER_IPA &system_noc SLAVE_OCIMEM>,
 340                                         <&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_IPA_CFG>;
 341                         interconnect-names = "memory-a",
 342                                              "memory-b",
 343                                              "imem",
 344                                              "config";
 345
 346                         qcom,smem-states = <&ipa_smp2p_out 0>,
 347                                            <&ipa_smp2p_out 1>;
 348                         qcom,smem-state-names = "ipa-clock-enabled-valid",
 349                                                 "ipa-clock-enabled";
 350
 351                         status = "disabled";
 352                 };
 353
 354                 tcsr_mutex: hwlock@1f40000 {
 355                         compatible = "qcom,tcsr-mutex";
 356                         reg = <0x01f40000 0x40000>;
 357                         #hwlock-cells = <1>;
 358                 };
 359
 360                 sdhc_1: sdhci@8804000 {
 361                         compatible = "qcom,sdx55-sdhci", "qcom,sdhci-msm-v5";
 362                         reg = <0x08804000 0x1000>;
 363                         interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
 364                                      <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 365                         interrupt-names = "hc_irq", "pwr_irq";
 366                         clocks = <&gcc GCC_SDCC1_AHB_CLK>,
 367                                  <&gcc GCC_SDCC1_APPS_CLK>;
 368                         clock-names = "iface", "core";
 369                         status = "disabled";
 370                 };
 371
 372                 remoteproc_mpss: remoteproc@4080000 {
 373                         compatible = "qcom,sdx55-mpss-pas";
 374                         reg = <0x04080000 0x4040>;
 375
 376                         interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
 377                                               <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
 378                                               <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
 379                                               <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
 380                                               <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
 381                                               <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
 382                         interrupt-names = "wdog", "fatal", "ready", "handover",
 383                                           "stop-ack", "shutdown-ack";
 384
 385                         clocks = <&rpmhcc RPMH_CXO_CLK>;
 386                         clock-names = "xo";
 387
 388                         power-domains = <&rpmhpd SDX55_CX>,
 389                                         <&rpmhpd SDX55_MSS>;
 390                         power-domain-names = "cx", "mss";
 391
 392                         qcom,smem-states = <&modem_smp2p_out 0>;
 393                         qcom,smem-state-names = "stop";
 394
 395                         status = "disabled";
 396
 397                         glink-edge {
 398                                 interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>;
 399                                 label = "mpss";
 400                                 qcom,remote-pid = <1>;
 401                                 mboxes = <&apcs 15>;
 402                         };
 403                 };
 404
 405                 usb: usb@a6f8800 {
 406                         compatible = "qcom,sdx55-dwc3", "qcom,dwc3";
 407                         reg = <0x0a6f8800 0x400>;
 408                         status = "disabled";
 409                         #address-cells = <1>;
 410                         #size-cells = <1>;
 411                         ranges;
 412
 413                         clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
 414                                  <&gcc GCC_USB30_MASTER_CLK>,
 415                                  <&gcc GCC_USB30_MSTR_AXI_CLK>,
 416                                  <&gcc GCC_USB30_MOCK_UTMI_CLK>,
 417                                  <&gcc GCC_USB30_SLEEP_CLK>;
 418                         clock-names = "cfg_noc", "core", "iface", "mock_utmi",
 419                                       "sleep";
 420
 421                         assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
 422                                           <&gcc GCC_USB30_MASTER_CLK>;
 423                         assigned-clock-rates = <19200000>, <200000000>;
 424
 425                         interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 426                                      <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
 427                                      <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
 428                                      <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 429                         interrupt-names = "hs_phy_irq", "ss_phy_irq",
 430                                           "dm_hs_phy_irq", "dp_hs_phy_irq";
 431
 432                         power-domains = <&gcc USB30_GDSC>;
 433
 434                         resets = <&gcc GCC_USB30_BCR>;
 435
 436                         usb_dwc3: dwc3@a600000 {
 437                                 compatible = "snps,dwc3";
 438                                 reg = <0x0a600000 0xcd00>;
 439                                 interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 440                                 iommus = <&apps_smmu 0x1a0 0x0>;
 441                                 snps,dis_u2_susphy_quirk;
 442                                 snps,dis_enblslpm_quirk;
 443                                 phys = <&usb_hsphy>, <&usb_ssphy>;
 444                                 phy-names = "usb2-phy", "usb3-phy";
 445                         };
 446                 };
 447
 448                 pdc: interrupt-controller@b210000 {
 449                         compatible = "qcom,sdx55-pdc", "qcom,pdc";
 450                         reg = <0x0b210000 0x30000>;
 451                         qcom,pdc-ranges = <0 179 52>;
 452                         #interrupt-cells = <3>;
 453                         interrupt-parent = <&intc>;
 454                         interrupt-controller;
 455                 };
 456
 457                 restart@c264000 {
 458                         compatible = "qcom,pshold";
 459                         reg = <0x0c264000 0x1000>;
 460                 };
 461
 462                 spmi_bus: qcom,spmi@c440000 {
 463                         compatible = "qcom,spmi-pmic-arb";
 464                         reg = <0x0c440000 0x0000d00>,
 465                               <0x0c600000 0x2000000>,
 466                               <0x0e600000 0x0100000>,
 467                               <0x0e700000 0x00a0000>,
 468                               <0x0c40a000 0x0000700>;
 469                         reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 470                         interrupt-names = "periph_irq";
 471                         interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 472                         qcom,ee = <0>;
 473                         qcom,channel = <0>;
 474                         #address-cells = <2>;
 475                         #size-cells = <0>;
 476                         interrupt-controller;
 477                         #interrupt-cells = <4>;
 478                         cell-index = <0>;
 479                 };
 480
 481                 tlmm: pinctrl@f100000 {
 482                         compatible = "qcom,sdx55-pinctrl";
 483                         reg = <0xf100000 0x300000>;
 484                         interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
 485                         gpio-controller;
 486                         #gpio-cells = <2>;
 487                         interrupt-controller;
 488                         #interrupt-cells = <2>;
 489                 };
 490
 491                 imem@1468f000 {
 492                         compatible = "simple-mfd";
 493                         reg = <0x1468f000 0x1000>;
 494
 495                         #address-cells = <1>;
 496                         #size-cells = <1>;
 497
 498                         ranges = <0x0 0x1468f000 0x1000>;
 499
 500                         pil-reloc@94c {
 501                                 compatible = "qcom,pil-reloc-info";
 502                                 reg = <0x94c 0x200>;
 503                         };
 504                 };
 505
 506                 apps_smmu: iommu@15000000 {
 507                         compatible = "qcom,sdx55-smmu-500", "arm,mmu-500";
 508                         reg = <0x15000000 0x20000>;
 509                         #iommu-cells = <2>;
 510                         #global-interrupts = <1>;
 511                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
 512                                      <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 513                                      <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
 514                                      <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 515                                      <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
 516                                      <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
 517                                      <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
 518                                      <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
 519                                      <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
 520                                      <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
 521                                      <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
 522                                      <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
 523                                      <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
 524                                      <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
 525                                      <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
 526                                      <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
 527                                      <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 528                 };
 529
 530                 intc: interrupt-controller@17800000 {
 531                         compatible = "qcom,msm-qgic2";
 532                         interrupt-controller;
 533                         interrupt-parent = <&intc>;
 534                         #interrupt-cells = <3>;
 535                         reg = <0x17800000 0x1000>,
 536                               <0x17802000 0x1000>;
 537                 };
 538
 539                 a7pll: clock@17808000 {
 540                         compatible = "qcom,sdx55-a7pll";
 541                         reg = <0x17808000 0x1000>;
 542                         clocks = <&rpmhcc RPMH_CXO_CLK>;
 543                         clock-names = "bi_tcxo";
 544                         #clock-cells = <0>;
 545                 };
 546
 547                 apcs: mailbox@17810000 {
 548                         compatible = "qcom,sdx55-apcs-gcc", "syscon";
 549                         reg = <0x17810000 0x2000>;
 550                         #mbox-cells = <1>;
 551                         clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>;
 552                         clock-names = "ref", "pll", "aux";
 553                         #clock-cells = <0>;
 554                 };
 555
 556                 watchdog@17817000 {
 557                         compatible = "qcom,apss-wdt-sdx55", "qcom,kpss-wdt";
 558                         reg = <0x17817000 0x1000>;
 559                         clocks = <&sleep_clk>;
 560                 };
 561
 562                 timer@17820000 {
 563                         #address-cells = <1>;
 564                         #size-cells = <1>;
 565                         ranges;
 566                         compatible = "arm,armv7-timer-mem";
 567                         reg = <0x17820000 0x1000>;
 568                         clock-frequency = <19200000>;
 569
 570                         frame@17821000 {
 571                                 frame-number = <0>;
 572                                 interrupts = <GIC_SPI 7 0x4>,
 573                                              <GIC_SPI 6 0x4>;
 574                                 reg = <0x17821000 0x1000>,
 575                                       <0x17822000 0x1000>;
 576                         };
 577
 578                         frame@17823000 {
 579                                 frame-number = <1>;
 580                                 interrupts = <GIC_SPI 8 0x4>;
 581                                 reg = <0x17823000 0x1000>;
 582                                 status = "disabled";
 583                         };
 584
 585                         frame@17824000 {
 586                                 frame-number = <2>;
 587                                 interrupts = <GIC_SPI 9 0x4>;
 588                                 reg = <0x17824000 0x1000>;
 589                                 status = "disabled";
 590                         };
 591
 592                         frame@17825000 {
 593                                 frame-number = <3>;
 594                                 interrupts = <GIC_SPI 10 0x4>;
 595                                 reg = <0x17825000 0x1000>;
 596                                 status = "disabled";
 597                         };
 598
 599                         frame@17826000 {
 600                                 frame-number = <4>;
 601                                 interrupts = <GIC_SPI 11 0x4>;
 602                                 reg = <0x17826000 0x1000>;
 603                                 status = "disabled";
 604                         };
 605
 606                         frame@17827000 {
 607                                 frame-number = <5>;
 608                                 interrupts = <GIC_SPI 12 0x4>;
 609                                 reg = <0x17827000 0x1000>;
 610                                 status = "disabled";
 611                         };
 612
 613                         frame@17828000 {
 614                                 frame-number = <6>;
 615                                 interrupts = <GIC_SPI 13 0x4>;
 616                                 reg = <0x17828000 0x1000>;
 617                                 status = "disabled";
 618                         };
 619
 620                         frame@17829000 {
 621                                 frame-number = <7>;
 622                                 interrupts = <GIC_SPI 14 0x4>;
 623                                 reg = <0x17829000 0x1000>;
 624                                 status = "disabled";
 625                         };
 626                 };
 627
 628                 apps_rsc: rsc@17840000 {
 629                         compatible = "qcom,rpmh-rsc";
 630                         reg = <0x17830000 0x10000>, <0x17840000 0x10000>;
 631                         reg-names = "drv-0", "drv-1";
 632                         interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 633                                      <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 634                         qcom,tcs-offset = <0xd00>;
 635                         qcom,drv-id = <1>;
 636                         qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   2>,
 637                                           <WAKE_TCS    2>, <CONTROL_TCS 1>;
 638
 639                         rpmhcc: clock-controller {
 640                                 compatible = "qcom,sdx55-rpmh-clk";
 641                                 #clock-cells = <1>;
 642                                 clock-names = "xo";
 643                                 clocks = <&xo_board>;
 644                         };
 645
 646                         rpmhpd: power-controller {
 647                                 compatible = "qcom,sdx55-rpmhpd";
 648                                 #power-domain-cells = <1>;
 649                                 operating-points-v2 = <&rpmhpd_opp_table>;
 650
 651                                 rpmhpd_opp_table: opp-table {
 652                                         compatible = "operating-points-v2";
 653
 654                                         rpmhpd_opp_ret: opp1 {
 655                                                 opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
 656                                         };
 657
 658                                         rpmhpd_opp_min_svs: opp2 {
 659                                                 opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
 660                                         };
 661
 662                                         rpmhpd_opp_low_svs: opp3 {
 663                                                 opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 664                                         };
 665
 666                                         rpmhpd_opp_svs: opp4 {
 667                                                 opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
 668                                         };
 669
 670                                         rpmhpd_opp_svs_l1: opp5 {
 671                                                 opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
 672                                         };
 673
 674                                         rpmhpd_opp_nom: opp6 {
 675                                                 opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
 676                                         };
 677
 678                                         rpmhpd_opp_nom_l1: opp7 {
 679                                                 opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
 680                                         };
 681
 682                                         rpmhpd_opp_nom_l2: opp8 {
 683                                                 opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
 684                                         };
 685
 686                                         rpmhpd_opp_turbo: opp9 {
 687                                                 opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
 688                                         };
 689
 690                                         rpmhpd_opp_turbo_l1: opp10 {
 691                                                 opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
 692                                         };
 693                                 };
 694                         };
 695
 696                         apps_bcm_voter: bcm_voter {
 697                                 compatible = "qcom,bcm-voter";
 698                         };
 699                 };
 700         };
 701
 702         timer {
 703                 compatible = "arm,armv7-timer";
 704                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 705                              <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 706                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 707                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 708                 clock-frequency = <19200000>;
 709         };
 710 };