arch/arm/boot/dts/qcom-msm8974.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /dts-v1/;
   3
   4 #include <dt-bindings/interconnect/qcom,msm8974.h>
   5 #include <dt-bindings/interrupt-controller/arm-gic.h>
   6 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
   7 #include <dt-bindings/clock/qcom,mmcc-msm8974.h>
   8 #include <dt-bindings/clock/qcom,rpmcc.h>
   9 #include <dt-bindings/reset/qcom,gcc-msm8974.h>
  10 #include <dt-bindings/gpio/gpio.h>
  11
  12 / {
  13         #address-cells = <1>;
  14         #size-cells = <1>;
  15         model = "Qualcomm MSM8974";
  16         compatible = "qcom,msm8974";
  17         interrupt-parent = <&intc>;
  18
  19         reserved-memory {
  20                 #address-cells = <1>;
  21                 #size-cells = <1>;
  22                 ranges;
  23
  24                 mpss_region: mpss@8000000 {
  25                         reg = <0x08000000 0x5100000>;
  26                         no-map;
  27                 };
  28
  29                 mba_region: mba@d100000 {
  30                         reg = <0x0d100000 0x100000>;
  31                         no-map;
  32                 };
  33
  34                 wcnss_region: wcnss@d200000 {
  35                         reg = <0x0d200000 0xa00000>;
  36                         no-map;
  37                 };
  38
  39                 adsp_region: adsp@dc00000 {
  40                         reg = <0x0dc00000 0x1900000>;
  41                         no-map;
  42                 };
  43
  44                 venus@f500000 {
  45                         reg = <0x0f500000 0x500000>;
  46                         no-map;
  47                 };
  48
  49                 smem_region: smem@fa00000 {
  50                         reg = <0xfa00000 0x200000>;
  51                         no-map;
  52                 };
  53
  54                 tz@fc00000 {
  55                         reg = <0x0fc00000 0x160000>;
  56                         no-map;
  57                 };
  58
  59                 rfsa@fd60000 {
  60                         reg = <0x0fd60000 0x20000>;
  61                         no-map;
  62                 };
  63
  64                 rmtfs@fd80000 {
  65                         compatible = "qcom,rmtfs-mem";
  66                         reg = <0x0fd80000 0x180000>;
  67                         no-map;
  68
  69                         qcom,client-id = <1>;
  70                 };
  71         };
  72
  73         cpus {
  74                 #address-cells = <1>;
  75                 #size-cells = <0>;
  76                 interrupts = <GIC_PPI 9 0xf04>;
  77
  78                 CPU0: cpu@0 {
  79                         compatible = "qcom,krait";
  80                         enable-method = "qcom,kpss-acc-v2";
  81                         device_type = "cpu";
  82                         reg = <0>;
  83                         next-level-cache = <&L2>;
  84                         qcom,acc = <&acc0>;
  85                         qcom,saw = <&saw0>;
  86                         cpu-idle-states = <&CPU_SPC>;
  87                 };
  88
  89                 CPU1: cpu@1 {
  90                         compatible = "qcom,krait";
  91                         enable-method = "qcom,kpss-acc-v2";
  92                         device_type = "cpu";
  93                         reg = <1>;
  94                         next-level-cache = <&L2>;
  95                         qcom,acc = <&acc1>;
  96                         qcom,saw = <&saw1>;
  97                         cpu-idle-states = <&CPU_SPC>;
  98                 };
  99
 100                 CPU2: cpu@2 {
 101                         compatible = "qcom,krait";
 102                         enable-method = "qcom,kpss-acc-v2";
 103                         device_type = "cpu";
 104                         reg = <2>;
 105                         next-level-cache = <&L2>;
 106                         qcom,acc = <&acc2>;
 107                         qcom,saw = <&saw2>;
 108                         cpu-idle-states = <&CPU_SPC>;
 109                 };
 110
 111                 CPU3: cpu@3 {
 112                         compatible = "qcom,krait";
 113                         enable-method = "qcom,kpss-acc-v2";
 114                         device_type = "cpu";
 115                         reg = <3>;
 116                         next-level-cache = <&L2>;
 117                         qcom,acc = <&acc3>;
 118                         qcom,saw = <&saw3>;
 119                         cpu-idle-states = <&CPU_SPC>;
 120                 };
 121
 122                 L2: l2-cache {
 123                         compatible = "cache";
 124                         cache-level = <2>;
 125                         qcom,saw = <&saw_l2>;
 126                 };
 127
 128                 idle-states {
 129                         CPU_SPC: spc {
 130                                 compatible = "qcom,idle-state-spc",
 131                                                 "arm,idle-state";
 132                                 entry-latency-us = <150>;
 133                                 exit-latency-us = <200>;
 134                                 min-residency-us = <2000>;
 135                         };
 136                 };
 137         };
 138
 139         memory {
 140                 device_type = "memory";
 141                 reg = <0x0 0x0>;
 142         };
 143
 144         thermal-zones {
 145                 cpu-thermal0 {
 146                         polling-delay-passive = <250>;
 147                         polling-delay = <1000>;
 148
 149                         thermal-sensors = <&tsens 5>;
 150
 151                         trips {
 152                                 cpu_alert0: trip0 {
 153                                         temperature = <75000>;
 154                                         hysteresis = <2000>;
 155                                         type = "passive";
 156                                 };
 157                                 cpu_crit0: trip1 {
 158                                         temperature = <110000>;
 159                                         hysteresis = <2000>;
 160                                         type = "critical";
 161                                 };
 162                         };
 163                 };
 164
 165                 cpu-thermal1 {
 166                         polling-delay-passive = <250>;
 167                         polling-delay = <1000>;
 168
 169                         thermal-sensors = <&tsens 6>;
 170
 171                         trips {
 172                                 cpu_alert1: trip0 {
 173                                         temperature = <75000>;
 174                                         hysteresis = <2000>;
 175                                         type = "passive";
 176                                 };
 177                                 cpu_crit1: trip1 {
 178                                         temperature = <110000>;
 179                                         hysteresis = <2000>;
 180                                         type = "critical";
 181                                 };
 182                         };
 183                 };
 184
 185                 cpu-thermal2 {
 186                         polling-delay-passive = <250>;
 187                         polling-delay = <1000>;
 188
 189                         thermal-sensors = <&tsens 7>;
 190
 191                         trips {
 192                                 cpu_alert2: trip0 {
 193                                         temperature = <75000>;
 194                                         hysteresis = <2000>;
 195                                         type = "passive";
 196                                 };
 197                                 cpu_crit2: trip1 {
 198                                         temperature = <110000>;
 199                                         hysteresis = <2000>;
 200                                         type = "critical";
 201                                 };
 202                         };
 203                 };
 204
 205                 cpu-thermal3 {
 206                         polling-delay-passive = <250>;
 207                         polling-delay = <1000>;
 208
 209                         thermal-sensors = <&tsens 8>;
 210
 211                         trips {
 212                                 cpu_alert3: trip0 {
 213                                         temperature = <75000>;
 214                                         hysteresis = <2000>;
 215                                         type = "passive";
 216                                 };
 217                                 cpu_crit3: trip1 {
 218                                         temperature = <110000>;
 219                                         hysteresis = <2000>;
 220                                         type = "critical";
 221                                 };
 222                         };
 223                 };
 224
 225                 q6-dsp-thermal {
 226                         polling-delay-passive = <250>;
 227                         polling-delay = <1000>;
 228
 229                         thermal-sensors = <&tsens 1>;
 230
 231                         trips {
 232                                 q6_dsp_alert0: trip-point0 {
 233                                         temperature = <90000>;
 234                                         hysteresis = <2000>;
 235                                         type = "hot";
 236                                 };
 237                         };
 238                 };
 239
 240                 modemtx-thermal {
 241                         polling-delay-passive = <250>;
 242                         polling-delay = <1000>;
 243
 244                         thermal-sensors = <&tsens 2>;
 245
 246                         trips {
 247                                 modemtx_alert0: trip-point0 {
 248                                         temperature = <90000>;
 249                                         hysteresis = <2000>;
 250                                         type = "hot";
 251                                 };
 252                         };
 253                 };
 254
 255                 video-thermal {
 256                         polling-delay-passive = <250>;
 257                         polling-delay = <1000>;
 258
 259                         thermal-sensors = <&tsens 3>;
 260
 261                         trips {
 262                                 video_alert0: trip-point0 {
 263                                         temperature = <95000>;
 264                                         hysteresis = <2000>;
 265                                         type = "hot";
 266                                 };
 267                         };
 268                 };
 269
 270                 wlan-thermal {
 271                         polling-delay-passive = <250>;
 272                         polling-delay = <1000>;
 273
 274                         thermal-sensors = <&tsens 4>;
 275
 276                         trips {
 277                                 wlan_alert0: trip-point0 {
 278                                         temperature = <105000>;
 279                                         hysteresis = <2000>;
 280                                         type = "hot";
 281                                 };
 282                         };
 283                 };
 284
 285                 gpu-thermal-top {
 286                         polling-delay-passive = <250>;
 287                         polling-delay = <1000>;
 288
 289                         thermal-sensors = <&tsens 9>;
 290
 291                         trips {
 292                                 gpu1_alert0: trip-point0 {
 293                                         temperature = <90000>;
 294                                         hysteresis = <2000>;
 295                                         type = "hot";
 296                                 };
 297                         };
 298                 };
 299
 300                 gpu-thermal-bottom {
 301                         polling-delay-passive = <250>;
 302                         polling-delay = <1000>;
 303
 304                         thermal-sensors = <&tsens 10>;
 305
 306                         trips {
 307                                 gpu2_alert0: trip-point0 {
 308                                         temperature = <90000>;
 309                                         hysteresis = <2000>;
 310                                         type = "hot";
 311                                 };
 312                         };
 313                 };
 314         };
 315
 316         cpu-pmu {
 317                 compatible = "qcom,krait-pmu";
 318                 interrupts = <GIC_PPI 7 0xf04>;
 319         };
 320
 321         clocks {
 322                 xo_board: xo_board {
 323                         compatible = "fixed-clock";
 324                         #clock-cells = <0>;
 325                         clock-frequency = <19200000>;
 326                 };
 327
 328                 sleep_clk: sleep_clk {
 329                         compatible = "fixed-clock";
 330                         #clock-cells = <0>;
 331                         clock-frequency = <32768>;
 332                 };
 333         };
 334
 335         timer {
 336                 compatible = "arm,armv7-timer";
 337                 interrupts = <GIC_PPI 2 0xf08>,
 338                              <GIC_PPI 3 0xf08>,
 339                              <GIC_PPI 4 0xf08>,
 340                              <GIC_PPI 1 0xf08>;
 341                 clock-frequency = <19200000>;
 342         };
 343
 344         adsp-pil {
 345                 compatible = "qcom,msm8974-adsp-pil";
 346
 347                 interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
 348                                       <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
 349                                       <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
 350                                       <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
 351                                       <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
 352                 interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
 353
 354                 cx-supply = <&pm8841_s2>;
 355
 356                 clocks = <&xo_board>;
 357                 clock-names = "xo";
 358
 359                 memory-region = <&adsp_region>;
 360
 361                 qcom,smem-states = <&adsp_smp2p_out 0>;
 362                 qcom,smem-state-names = "stop";
 363
 364                 smd-edge {
 365                         interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
 366
 367                         qcom,ipc = <&apcs 8 8>;
 368                         qcom,smd-edge = <1>;
 369
 370                         label = "lpass";
 371                 };
 372         };
 373
 374         smem {
 375                 compatible = "qcom,smem";
 376
 377                 memory-region = <&smem_region>;
 378                 qcom,rpm-msg-ram = <&rpm_msg_ram>;
 379
 380                 hwlocks = <&tcsr_mutex 3>;
 381         };
 382
 383         smp2p-adsp {
 384                 compatible = "qcom,smp2p";
 385                 qcom,smem = <443>, <429>;
 386
 387                 interrupt-parent = <&intc>;
 388                 interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
 389
 390                 qcom,ipc = <&apcs 8 10>;
 391
 392                 qcom,local-pid = <0>;
 393                 qcom,remote-pid = <2>;
 394
 395                 adsp_smp2p_out: master-kernel {
 396                         qcom,entry-name = "master-kernel";
 397                         #qcom,smem-state-cells = <1>;
 398                 };
 399
 400                 adsp_smp2p_in: slave-kernel {
 401                         qcom,entry-name = "slave-kernel";
 402
 403                         interrupt-controller;
 404                         #interrupt-cells = <2>;
 405                 };
 406         };
 407
 408         smp2p-modem {
 409                 compatible = "qcom,smp2p";
 410                 qcom,smem = <435>, <428>;
 411
 412                 interrupt-parent = <&intc>;
 413                 interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
 414
 415                 qcom,ipc = <&apcs 8 14>;
 416
 417                 qcom,local-pid = <0>;
 418                 qcom,remote-pid = <1>;
 419
 420                 modem_smp2p_out: master-kernel {
 421                         qcom,entry-name = "master-kernel";
 422                         #qcom,smem-state-cells = <1>;
 423                 };
 424
 425                 modem_smp2p_in: slave-kernel {
 426                         qcom,entry-name = "slave-kernel";
 427
 428                         interrupt-controller;
 429                         #interrupt-cells = <2>;
 430                 };
 431         };
 432
 433         smp2p-wcnss {
 434                 compatible = "qcom,smp2p";
 435                 qcom,smem = <451>, <431>;
 436
 437                 interrupt-parent = <&intc>;
 438                 interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
 439
 440                 qcom,ipc = <&apcs 8 18>;
 441
 442                 qcom,local-pid = <0>;
 443                 qcom,remote-pid = <4>;
 444
 445                 wcnss_smp2p_out: master-kernel {
 446                         qcom,entry-name = "master-kernel";
 447
 448                         #qcom,smem-state-cells = <1>;
 449                 };
 450
 451                 wcnss_smp2p_in: slave-kernel {
 452                         qcom,entry-name = "slave-kernel";
 453
 454                         interrupt-controller;
 455                         #interrupt-cells = <2>;
 456                 };
 457         };
 458
 459         smsm {
 460                 compatible = "qcom,smsm";
 461
 462                 #address-cells = <1>;
 463                 #size-cells = <0>;
 464
 465                 qcom,ipc-1 = <&apcs 8 13>;
 466                 qcom,ipc-2 = <&apcs 8 9>;
 467                 qcom,ipc-3 = <&apcs 8 19>;
 468
 469                 apps_smsm: apps@0 {
 470                         reg = <0>;
 471
 472                         #qcom,smem-state-cells = <1>;
 473                 };
 474
 475                 modem_smsm: modem@1 {
 476                         reg = <1>;
 477                         interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 478
 479                         interrupt-controller;
 480                         #interrupt-cells = <2>;
 481                 };
 482
 483                 adsp_smsm: adsp@2 {
 484                         reg = <2>;
 485                         interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
 486
 487                         interrupt-controller;
 488                         #interrupt-cells = <2>;
 489                 };
 490
 491                 wcnss_smsm: wcnss@7 {
 492                         reg = <7>;
 493                         interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
 494
 495                         interrupt-controller;
 496                         #interrupt-cells = <2>;
 497                 };
 498         };
 499
 500         firmware {
 501                 scm {
 502                         compatible = "qcom,scm";
 503                         clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
 504                         clock-names = "core", "bus", "iface";
 505                 };
 506         };
 507
 508         soc: soc {
 509                 #address-cells = <1>;
 510                 #size-cells = <1>;
 511                 ranges;
 512                 compatible = "simple-bus";
 513
 514                 intc: interrupt-controller@f9000000 {
 515                         compatible = "qcom,msm-qgic2";
 516                         interrupt-controller;
 517                         #interrupt-cells = <3>;
 518                         reg = <0xf9000000 0x1000>,
 519                               <0xf9002000 0x1000>;
 520                 };
 521
 522                 apcs: syscon@f9011000 {
 523                         compatible = "syscon";
 524                         reg = <0xf9011000 0x1000>;
 525                 };
 526
 527                 qfprom: qfprom@fc4bc000 {
 528                         #address-cells = <1>;
 529                         #size-cells = <1>;
 530                         compatible = "qcom,qfprom";
 531                         reg = <0xfc4bc000 0x1000>;
 532                         tsens_calib: calib@d0 {
 533                                 reg = <0xd0 0x18>;
 534                         };
 535                         tsens_backup: backup@440 {
 536                                 reg = <0x440 0x10>;
 537                         };
 538                 };
 539
 540                 tsens: thermal-sensor@fc4a9000 {
 541                         compatible = "qcom,msm8974-tsens";
 542                         reg = <0xfc4a9000 0x1000>, /* TM */
 543                               <0xfc4a8000 0x1000>; /* SROT */
 544                         nvmem-cells = <&tsens_calib>, <&tsens_backup>;
 545                         nvmem-cell-names = "calib", "calib_backup";
 546                         #qcom,sensors = <11>;
 547                         interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
 548                         interrupt-names = "uplow";
 549                         #thermal-sensor-cells = <1>;
 550                 };
 551
 552                 timer@f9020000 {
 553                         #address-cells = <1>;
 554                         #size-cells = <1>;
 555                         ranges;
 556                         compatible = "arm,armv7-timer-mem";
 557                         reg = <0xf9020000 0x1000>;
 558                         clock-frequency = <19200000>;
 559
 560                         frame@f9021000 {
 561                                 frame-number = <0>;
 562                                 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
 563                                              <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 564                                 reg = <0xf9021000 0x1000>,
 565                                       <0xf9022000 0x1000>;
 566                         };
 567
 568                         frame@f9023000 {
 569                                 frame-number = <1>;
 570                                 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 571                                 reg = <0xf9023000 0x1000>;
 572                                 status = "disabled";
 573                         };
 574
 575                         frame@f9024000 {
 576                                 frame-number = <2>;
 577                                 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 578                                 reg = <0xf9024000 0x1000>;
 579                                 status = "disabled";
 580                         };
 581
 582                         frame@f9025000 {
 583                                 frame-number = <3>;
 584                                 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 585                                 reg = <0xf9025000 0x1000>;
 586                                 status = "disabled";
 587                         };
 588
 589                         frame@f9026000 {
 590                                 frame-number = <4>;
 591                                 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 592                                 reg = <0xf9026000 0x1000>;
 593                                 status = "disabled";
 594                         };
 595
 596                         frame@f9027000 {
 597                                 frame-number = <5>;
 598                                 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 599                                 reg = <0xf9027000 0x1000>;
 600                                 status = "disabled";
 601                         };
 602
 603                         frame@f9028000 {
 604                                 frame-number = <6>;
 605                                 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 606                                 reg = <0xf9028000 0x1000>;
 607                                 status = "disabled";
 608                         };
 609                 };
 610
 611                 saw0: power-controller@f9089000 {
 612                         compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
 613                         reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
 614                 };
 615
 616                 saw1: power-controller@f9099000 {
 617                         compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
 618                         reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
 619                 };
 620
 621                 saw2: power-controller@f90a9000 {
 622                         compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
 623                         reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
 624                 };
 625
 626                 saw3: power-controller@f90b9000 {
 627                         compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
 628                         reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
 629                 };
 630
 631                 saw_l2: power-controller@f9012000 {
 632                         compatible = "qcom,saw2";
 633                         reg = <0xf9012000 0x1000>;
 634                         regulator;
 635                 };
 636
 637                 acc0: clock-controller@f9088000 {
 638                         compatible = "qcom,kpss-acc-v2";
 639                         reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
 640                 };
 641
 642                 acc1: clock-controller@f9098000 {
 643                         compatible = "qcom,kpss-acc-v2";
 644                         reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
 645                 };
 646
 647                 acc2: clock-controller@f90a8000 {
 648                         compatible = "qcom,kpss-acc-v2";
 649                         reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
 650                 };
 651
 652                 acc3: clock-controller@f90b8000 {
 653                         compatible = "qcom,kpss-acc-v2";
 654                         reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
 655                 };
 656
 657                 restart@fc4ab000 {
 658                         compatible = "qcom,pshold";
 659                         reg = <0xfc4ab000 0x4>;
 660                 };
 661
 662                 gcc: clock-controller@fc400000 {
 663                         compatible = "qcom,gcc-msm8974";
 664                         #clock-cells = <1>;
 665                         #reset-cells = <1>;
 666                         #power-domain-cells = <1>;
 667                         reg = <0xfc400000 0x4000>;
 668                 };
 669
 670                 tcsr: syscon@fd4a0000 {
 671                         compatible = "syscon";
 672                         reg = <0xfd4a0000 0x10000>;
 673                 };
 674
 675                 tcsr_mutex_block: syscon@fd484000 {
 676                         compatible = "syscon";
 677                         reg = <0xfd484000 0x2000>;
 678                 };
 679
 680                 mmcc: clock-controller@fd8c0000 {
 681                         compatible = "qcom,mmcc-msm8974";
 682                         #clock-cells = <1>;
 683                         #reset-cells = <1>;
 684                         #power-domain-cells = <1>;
 685                         reg = <0xfd8c0000 0x6000>;
 686                 };
 687
 688                 tcsr_mutex: tcsr-mutex {
 689                         compatible = "qcom,tcsr-mutex";
 690                         syscon = <&tcsr_mutex_block 0 0x80>;
 691
 692                         #hwlock-cells = <1>;
 693                 };
 694
 695                 rpm_msg_ram: memory@fc428000 {
 696                         compatible = "qcom,rpm-msg-ram";
 697                         reg = <0xfc428000 0x4000>;
 698                 };
 699
 700                 blsp1_uart1: serial@f991d000 {
 701                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 702                         reg = <0xf991d000 0x1000>;
 703                         interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 704                         clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 705                         clock-names = "core", "iface";
 706                         status = "disabled";
 707                 };
 708
 709                 blsp1_uart2: serial@f991e000 {
 710                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 711                         reg = <0xf991e000 0x1000>;
 712                         interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 713                         clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 714                         clock-names = "core", "iface";
 715                         status = "disabled";
 716                 };
 717
 718                 blsp2_uart7: serial@f995d000 {
 719                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 720                         reg = <0xf995d000 0x1000>;
 721                         interrupts = <GIC_SPI 113 IRQ_TYPE_NONE>;
 722                         clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 723                         clock-names = "core", "iface";
 724                         status = "disabled";
 725                 };
 726
 727                 blsp2_uart8: serial@f995e000 {
 728                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 729                         reg = <0xf995e000 0x1000>;
 730                         interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 731                         clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 732                         clock-names = "core", "iface";
 733                         status = "disabled";
 734                 };
 735
 736                 blsp2_uart10: serial@f9960000 {
 737                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 738                         reg = <0xf9960000 0x1000>;
 739                         interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 740                         clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 741                         clock-names = "core", "iface";
 742                         status = "disabled";
 743                 };
 744
 745                 sdhci@f9824900 {
 746                         compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
 747                         reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
 748                         reg-names = "hc_mem", "core_mem";
 749                         interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
 750                                      <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 751                         interrupt-names = "hc_irq", "pwr_irq";
 752                         clocks = <&gcc GCC_SDCC1_APPS_CLK>,
 753                                  <&gcc GCC_SDCC1_AHB_CLK>,
 754                                  <&xo_board>;
 755                         clock-names = "core", "iface", "xo";
 756                         status = "disabled";
 757                 };
 758
 759                 sdhci@f9864900 {
 760                         compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
 761                         reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
 762                         reg-names = "hc_mem", "core_mem";
 763                         interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
 764                                      <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
 765                         interrupt-names = "hc_irq", "pwr_irq";
 766                         clocks = <&gcc GCC_SDCC3_APPS_CLK>,
 767                                  <&gcc GCC_SDCC3_AHB_CLK>,
 768                                  <&xo_board>;
 769                         clock-names = "core", "iface", "xo";
 770                         status = "disabled";
 771                 };
 772
 773                 sdhci@f98a4900 {
 774                         compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
 775                         reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
 776                         reg-names = "hc_mem", "core_mem";
 777                         interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
 778                                      <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 779                         interrupt-names = "hc_irq", "pwr_irq";
 780                         clocks = <&gcc GCC_SDCC2_APPS_CLK>,
 781                                  <&gcc GCC_SDCC2_AHB_CLK>,
 782                                  <&xo_board>;
 783                         clock-names = "core", "iface", "xo";
 784                         status = "disabled";
 785                 };
 786
 787                 otg: usb@f9a55000 {
 788                         compatible = "qcom,ci-hdrc";
 789                         reg = <0xf9a55000 0x200>,
 790                               <0xf9a55200 0x200>;
 791                         interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 792                         clocks = <&gcc GCC_USB_HS_AHB_CLK>,
 793                                  <&gcc GCC_USB_HS_SYSTEM_CLK>;
 794                         clock-names = "iface", "core";
 795                         assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
 796                         assigned-clock-rates = <75000000>;
 797                         resets = <&gcc GCC_USB_HS_BCR>;
 798                         reset-names = "core";
 799                         phy_type = "ulpi";
 800                         dr_mode = "otg";
 801                         ahb-burst-config = <0>;
 802                         phy-names = "usb-phy";
 803                         status = "disabled";
 804                         #reset-cells = <1>;
 805
 806                         ulpi {
 807                                 usb_hs1_phy: phy@a {
 808                                         compatible = "qcom,usb-hs-phy-msm8974",
 809                                                      "qcom,usb-hs-phy";
 810                                         #phy-cells = <0>;
 811                                         clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
 812                                         clock-names = "ref", "sleep";
 813                                         resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
 814                                         reset-names = "phy", "por";
 815                                         status = "disabled";
 816                                 };
 817
 818                                 usb_hs2_phy: phy@b {
 819                                         compatible = "qcom,usb-hs-phy-msm8974",
 820                                                      "qcom,usb-hs-phy";
 821                                         #phy-cells = <0>;
 822                                         clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>;
 823                                         clock-names = "ref", "sleep";
 824                                         resets = <&gcc GCC_USB2B_PHY_BCR>, <&otg 1>;
 825                                         reset-names = "phy", "por";
 826                                         status = "disabled";
 827                                 };
 828                         };
 829                 };
 830
 831                 rng@f9bff000 {
 832                         compatible = "qcom,prng";
 833                         reg = <0xf9bff000 0x200>;
 834                         clocks = <&gcc GCC_PRNG_AHB_CLK>;
 835                         clock-names = "core";
 836                 };
 837
 838                 remoteproc@fc880000 {
 839                         compatible = "qcom,msm8974-mss-pil";
 840                         reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
 841                         reg-names = "qdsp6", "rmb";
 842
 843                         interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
 844                                               <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
 845                                               <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
 846                                               <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
 847                                               <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
 848                         interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
 849
 850                         clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
 851                                  <&gcc GCC_MSS_CFG_AHB_CLK>,
 852                                  <&gcc GCC_BOOT_ROM_AHB_CLK>,
 853                                  <&xo_board>;
 854                         clock-names = "iface", "bus", "mem", "xo";
 855
 856                         resets = <&gcc GCC_MSS_RESTART>;
 857                         reset-names = "mss_restart";
 858
 859                         cx-supply = <&pm8841_s2>;
 860                         mss-supply = <&pm8841_s3>;
 861                         mx-supply = <&pm8841_s1>;
 862                         pll-supply = <&pm8941_l12>;
 863
 864                         qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
 865
 866                         qcom,smem-states = <&modem_smp2p_out 0>;
 867                         qcom,smem-state-names = "stop";
 868
 869                         mba {
 870                                 memory-region = <&mba_region>;
 871                         };
 872
 873                         mpss {
 874                                 memory-region = <&mpss_region>;
 875                         };
 876
 877                         smd-edge {
 878                                 interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
 879
 880                                 qcom,ipc = <&apcs 8 12>;
 881                                 qcom,smd-edge = <0>;
 882
 883                                 label = "modem";
 884                         };
 885                 };
 886
 887                 pronto: remoteproc@fb21b000 {
 888                         compatible = "qcom,pronto-v2-pil", "qcom,pronto";
 889                         reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
 890                         reg-names = "ccu", "dxe", "pmu";
 891
 892                         memory-region = <&wcnss_region>;
 893
 894                         interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
 895                                               <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
 896                                               <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
 897                                               <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
 898                                               <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
 899                         interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
 900
 901                         vddpx-supply = <&pm8941_s3>;
 902
 903                         qcom,smem-states = <&wcnss_smp2p_out 0>;
 904                         qcom,smem-state-names = "stop";
 905
 906                         status = "disabled";
 907
 908                         iris {
 909                                 compatible = "qcom,wcn3680";
 910
 911                                 clocks = <&rpmcc RPM_SMD_CXO_A2>;
 912                                 clock-names = "xo";
 913
 914                                 vddxo-supply = <&pm8941_l6>;
 915                                 vddrfa-supply = <&pm8941_l11>;
 916                                 vddpa-supply = <&pm8941_l19>;
 917                                 vdddig-supply = <&pm8941_s3>;
 918                         };
 919
 920                         smd-edge {
 921                                 interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
 922
 923                                 qcom,ipc = <&apcs 8 17>;
 924                                 qcom,smd-edge = <6>;
 925
 926                                 wcnss {
 927                                         compatible = "qcom,wcnss";
 928                                         qcom,smd-channels = "WCNSS_CTRL";
 929                                         status = "disabled";
 930
 931                                         qcom,mmio = <&pronto>;
 932
 933                                         bt {
 934                                                 compatible = "qcom,wcnss-bt";
 935                                         };
 936
 937                                         wifi {
 938                                                 compatible = "qcom,wcnss-wlan";
 939
 940                                                 interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
 941                                                              <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>;
 942                                                 interrupt-names = "tx", "rx";
 943
 944                                                 qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
 945                                                 qcom,smem-state-names = "tx-enable", "tx-rings-empty";
 946                                         };
 947                                 };
 948                         };
 949                 };
 950
 951                 msmgpio: pinctrl@fd510000 {
 952                         compatible = "qcom,msm8974-pinctrl";
 953                         reg = <0xfd510000 0x4000>;
 954                         gpio-controller;
 955                         gpio-ranges = <&msmgpio 0 0 146>;
 956                         #gpio-cells = <2>;
 957                         interrupt-controller;
 958                         #interrupt-cells = <2>;
 959                         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 960                 };
 961
 962                 i2c@f9923000 {
 963                         status = "disabled";
 964                         compatible = "qcom,i2c-qup-v2.1.1";
 965                         reg = <0xf9923000 0x1000>;
 966                         interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
 967                         clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 968                         clock-names = "core", "iface";
 969                         #address-cells = <1>;
 970                         #size-cells = <0>;
 971                 };
 972
 973                 i2c@f9924000 {
 974                         status = "disabled";
 975                         compatible = "qcom,i2c-qup-v2.1.1";
 976                         reg = <0xf9924000 0x1000>;
 977                         interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 978                         clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 979                         clock-names = "core", "iface";
 980                         #address-cells = <1>;
 981                         #size-cells = <0>;
 982                 };
 983
 984                 blsp_i2c3: i2c@f9925000 {
 985                         status = "disabled";
 986                         compatible = "qcom,i2c-qup-v2.1.1";
 987                         reg = <0xf9925000 0x1000>;
 988                         interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
 989                         clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 990                         clock-names = "core", "iface";
 991                         #address-cells = <1>;
 992                         #size-cells = <0>;
 993                 };
 994
 995                 blsp_i2c6: i2c@f9928000 {
 996                         status = "disabled";
 997                         compatible = "qcom,i2c-qup-v2.1.1";
 998                         reg = <0xf9928000 0x1000>;
 999                         interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
1000                         clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
1001                         clock-names = "core", "iface";
1002                         #address-cells = <1>;
1003                         #size-cells = <0>;
1004                 };
1005
1006                 blsp_i2c8: i2c@f9964000 {
1007                         status = "disabled";
1008                         compatible = "qcom,i2c-qup-v2.1.1";
1009                         reg = <0xf9964000 0x1000>;
1010                         interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
1011                         clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
1012                         clock-names = "core", "iface";
1013                         #address-cells = <1>;
1014                         #size-cells = <0>;
1015                 };
1016
1017                 blsp_i2c11: i2c@f9967000 {
1018                         status = "disabled";
1019                         compatible = "qcom,i2c-qup-v2.1.1";
1020                         reg = <0xf9967000 0x1000>;
1021                         interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
1022                         clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
1023                         clock-names = "core", "iface";
1024                         #address-cells = <1>;
1025                         #size-cells = <0>;
1026                         dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
1027                         dma-names = "tx", "rx";
1028                 };
1029
1030                 blsp_i2c12: i2c@f9968000 {
1031                         status = "disabled";
1032                         compatible = "qcom,i2c-qup-v2.1.1";
1033                         reg = <0xf9968000 0x1000>;
1034                         interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
1035                         clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
1036                         clock-names = "core", "iface";
1037                         #address-cells = <1>;
1038                         #size-cells = <0>;
1039                 };
1040
1041                 spmi_bus: spmi@fc4cf000 {
1042                         compatible = "qcom,spmi-pmic-arb";
1043                         reg-names = "core", "intr", "cnfg";
1044                         reg = <0xfc4cf000 0x1000>,
1045                               <0xfc4cb000 0x1000>,
1046                               <0xfc4ca000 0x1000>;
1047                         interrupt-names = "periph_irq";
1048                         interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
1049                         qcom,ee = <0>;
1050                         qcom,channel = <0>;
1051                         #address-cells = <2>;
1052                         #size-cells = <0>;
1053                         interrupt-controller;
1054                         #interrupt-cells = <4>;
1055                 };
1056
1057                 blsp2_dma: dma-controller@f9944000 {
1058                         compatible = "qcom,bam-v1.4.0";
1059                         reg = <0xf9944000 0x19000>;
1060                         interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
1061                         clocks = <&gcc GCC_BLSP2_AHB_CLK>;
1062                         clock-names = "bam_clk";
1063                         #dma-cells = <1>;
1064                         qcom,ee = <0>;
1065                 };
1066
1067                 etr@fc322000 {
1068                         compatible = "arm,coresight-tmc", "arm,primecell";
1069                         reg = <0xfc322000 0x1000>;
1070
1071                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1072                         clock-names = "apb_pclk", "atclk";
1073
1074                         in-ports {
1075                                 port {
1076                                         etr_in: endpoint {
1077                                                 remote-endpoint = <&replicator_out0>;
1078                                         };
1079                                 };
1080                         };
1081                 };
1082
1083                 tpiu@fc318000 {
1084                         compatible = "arm,coresight-tpiu", "arm,primecell";
1085                         reg = <0xfc318000 0x1000>;
1086
1087                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1088                         clock-names = "apb_pclk", "atclk";
1089
1090                         in-ports {
1091                                 port {
1092                                         tpiu_in: endpoint {
1093                                                 remote-endpoint = <&replicator_out1>;
1094                                         };
1095                                  };
1096                         };
1097                 };
1098
1099                 replicator@fc31c000 {
1100                         compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
1101                         reg = <0xfc31c000 0x1000>;
1102
1103                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1104                         clock-names = "apb_pclk", "atclk";
1105
1106                         out-ports {
1107                                 #address-cells = <1>;
1108                                 #size-cells = <0>;
1109
1110                                 port@0 {
1111                                         reg = <0>;
1112                                         replicator_out0: endpoint {
1113                                                 remote-endpoint = <&etr_in>;
1114                                         };
1115                                 };
1116                                 port@1 {
1117                                         reg = <1>;
1118                                         replicator_out1: endpoint {
1119                                                 remote-endpoint = <&tpiu_in>;
1120                                         };
1121                                 };
1122                         };
1123
1124                         in-ports {
1125                                 port {
1126                                         replicator_in: endpoint {
1127                                                 remote-endpoint = <&etf_out>;
1128                                         };
1129                                 };
1130                         };
1131                 };
1132
1133                 etf@fc307000 {
1134                         compatible = "arm,coresight-tmc", "arm,primecell";
1135                         reg = <0xfc307000 0x1000>;
1136
1137                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1138                         clock-names = "apb_pclk", "atclk";
1139
1140                         out-ports {
1141                                 port {
1142                                         etf_out: endpoint {
1143                                                 remote-endpoint = <&replicator_in>;
1144                                         };
1145                                 };
1146                         };
1147
1148                         in-ports {
1149                                 port {
1150                                         etf_in: endpoint {
1151                                                 remote-endpoint = <&merger_out>;
1152                                         };
1153                                 };
1154                         };
1155                 };
1156
1157                 funnel@fc31b000 {
1158                         compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1159                         reg = <0xfc31b000 0x1000>;
1160
1161                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1162                         clock-names = "apb_pclk", "atclk";
1163
1164                         in-ports {
1165                                 #address-cells = <1>;
1166                                 #size-cells = <0>;
1167
1168                                 /*
1169                                  * Not described input ports:
1170                                  * 0 - connected trought funnel to Audio, Modem and
1171                                  *     Resource and Power Manager CPU's
1172                                  * 2...7 - not-connected
1173                                  */
1174                                 port@1 {
1175                                         reg = <1>;
1176                                         merger_in1: endpoint {
1177                                                 remote-endpoint = <&funnel1_out>;
1178                                         };
1179                                 };
1180                         };
1181
1182                         out-ports {
1183                                 port {
1184                                         merger_out: endpoint {
1185                                                 remote-endpoint = <&etf_in>;
1186                                         };
1187                                 };
1188                         };
1189                 };
1190
1191                 funnel@fc31a000 {
1192                         compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1193                         reg = <0xfc31a000 0x1000>;
1194
1195                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1196                         clock-names = "apb_pclk", "atclk";
1197
1198                         in-ports {
1199                                 #address-cells = <1>;
1200                                 #size-cells = <0>;
1201
1202                                 /*
1203                                  * Not described input ports:
1204                                  * 0 - not-connected
1205                                  * 1 - connected trought funnel to Multimedia CPU
1206                                  * 2 - connected to Wireless CPU
1207                                  * 3 - not-connected
1208                                  * 4 - not-connected
1209                                  * 6 - not-connected
1210                                  * 7 - connected to STM
1211                                  */
1212                                 port@5 {
1213                                         reg = <5>;
1214                                         funnel1_in5: endpoint {
1215                                                 remote-endpoint = <&kpss_out>;
1216                                         };
1217                                 };
1218                         };
1219
1220                         out-ports {
1221                                 port {
1222                                         funnel1_out: endpoint {
1223                                                 remote-endpoint = <&merger_in1>;
1224                                         };
1225                                 };
1226                         };
1227                 };
1228
1229                 funnel@fc345000 { /* KPSS funnel only 4 inputs are used */
1230                         compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1231                         reg = <0xfc345000 0x1000>;
1232
1233                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1234                         clock-names = "apb_pclk", "atclk";
1235
1236                         in-ports {
1237                                 #address-cells = <1>;
1238                                 #size-cells = <0>;
1239
1240                                 port@0 {
1241                                         reg = <0>;
1242                                         kpss_in0: endpoint {
1243                                                 remote-endpoint = <&etm0_out>;
1244                                         };
1245                                 };
1246                                 port@1 {
1247                                         reg = <1>;
1248                                         kpss_in1: endpoint {
1249                                                 remote-endpoint = <&etm1_out>;
1250                                         };
1251                                 };
1252                                 port@2 {
1253                                         reg = <2>;
1254                                         kpss_in2: endpoint {
1255                                                 remote-endpoint = <&etm2_out>;
1256                                         };
1257                                 };
1258                                 port@3 {
1259                                         reg = <3>;
1260                                         kpss_in3: endpoint {
1261                                                 remote-endpoint = <&etm3_out>;
1262                                         };
1263                                 };
1264                         };
1265
1266                         out-ports {
1267                                 port {
1268                                         kpss_out: endpoint {
1269                                                 remote-endpoint = <&funnel1_in5>;
1270                                         };
1271                                 };
1272                         };
1273                 };
1274
1275                 etm@fc33c000 {
1276                         compatible = "arm,coresight-etm4x", "arm,primecell";
1277                         reg = <0xfc33c000 0x1000>;
1278
1279                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1280                         clock-names = "apb_pclk", "atclk";
1281
1282                         cpu = <&CPU0>;
1283
1284                         out-ports {
1285                                 port {
1286                                         etm0_out: endpoint {
1287                                                 remote-endpoint = <&kpss_in0>;
1288                                         };
1289                                 };
1290                         };
1291                 };
1292
1293                 etm@fc33d000 {
1294                         compatible = "arm,coresight-etm4x", "arm,primecell";
1295                         reg = <0xfc33d000 0x1000>;
1296
1297                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1298                         clock-names = "apb_pclk", "atclk";
1299
1300                         cpu = <&CPU1>;
1301
1302                         out-ports {
1303                                 port {
1304                                         etm1_out: endpoint {
1305                                                 remote-endpoint = <&kpss_in1>;
1306                                         };
1307                                 };
1308                         };
1309                 };
1310
1311                 etm@fc33e000 {
1312                         compatible = "arm,coresight-etm4x", "arm,primecell";
1313                         reg = <0xfc33e000 0x1000>;
1314
1315                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1316                         clock-names = "apb_pclk", "atclk";
1317
1318                         cpu = <&CPU2>;
1319
1320                         out-ports {
1321                                 port {
1322                                         etm2_out: endpoint {
1323                                                 remote-endpoint = <&kpss_in2>;
1324                                         };
1325                                 };
1326                         };
1327                 };
1328
1329                 etm@fc33f000 {
1330                         compatible = "arm,coresight-etm4x", "arm,primecell";
1331                         reg = <0xfc33f000 0x1000>;
1332
1333                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1334                         clock-names = "apb_pclk", "atclk";
1335
1336                         cpu = <&CPU3>;
1337
1338                         out-ports {
1339                                 port {
1340                                         etm3_out: endpoint {
1341                                                 remote-endpoint = <&kpss_in3>;
1342                                         };
1343                                 };
1344                         };
1345                 };
1346
1347                 ocmem@fdd00000 {
1348                         compatible = "qcom,msm8974-ocmem";
1349                         reg = <0xfdd00000 0x2000>,
1350                               <0xfec00000 0x180000>;
1351                         reg-names = "ctrl",
1352                                     "mem";
1353                         clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
1354                                  <&mmcc OCMEMCX_OCMEMNOC_CLK>;
1355                         clock-names = "core",
1356                                       "iface";
1357
1358                         #address-cells = <1>;
1359                         #size-cells = <1>;
1360
1361                         gmu_sram: gmu-sram@0 {
1362                                 reg = <0x0 0x100000>;
1363                         };
1364                 };
1365
1366                 bimc: interconnect@fc380000 {
1367                         reg = <0xfc380000 0x6a000>;
1368                         compatible = "qcom,msm8974-bimc";
1369                         #interconnect-cells = <1>;
1370                         clock-names = "bus", "bus_a";
1371                         clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
1372                                  <&rpmcc RPM_SMD_BIMC_A_CLK>;
1373                 };
1374
1375                 snoc: interconnect@fc460000 {
1376                         reg = <0xfc460000 0x4000>;
1377                         compatible = "qcom,msm8974-snoc";
1378                         #interconnect-cells = <1>;
1379                         clock-names = "bus", "bus_a";
1380                         clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
1381                                  <&rpmcc RPM_SMD_SNOC_A_CLK>;
1382                 };
1383
1384                 pnoc: interconnect@fc468000 {
1385                         reg = <0xfc468000 0x4000>;
1386                         compatible = "qcom,msm8974-pnoc";
1387                         #interconnect-cells = <1>;
1388                         clock-names = "bus", "bus_a";
1389                         clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
1390                                  <&rpmcc RPM_SMD_PNOC_A_CLK>;
1391                 };
1392
1393                 ocmemnoc: interconnect@fc470000 {
1394                         reg = <0xfc470000 0x4000>;
1395                         compatible = "qcom,msm8974-ocmemnoc";
1396                         #interconnect-cells = <1>;
1397                         clock-names = "bus", "bus_a";
1398                         clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
1399                                  <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
1400                 };
1401
1402                 mmssnoc: interconnect@fc478000 {
1403                         reg = <0xfc478000 0x4000>;
1404                         compatible = "qcom,msm8974-mmssnoc";
1405                         #interconnect-cells = <1>;
1406                         clock-names = "bus", "bus_a";
1407                         clocks = <&mmcc MMSS_S0_AXI_CLK>,
1408                                  <&mmcc MMSS_S0_AXI_CLK>;
1409                 };
1410
1411                 cnoc: interconnect@fc480000 {
1412                         reg = <0xfc480000 0x4000>;
1413                         compatible = "qcom,msm8974-cnoc";
1414                         #interconnect-cells = <1>;
1415                         clock-names = "bus", "bus_a";
1416                         clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
1417                                  <&rpmcc RPM_SMD_CNOC_A_CLK>;
1418                 };
1419
1420                 gpu: adreno@fdb00000 {
1421                         status = "disabled";
1422
1423                         compatible = "qcom,adreno-330.1",
1424                                      "qcom,adreno";
1425                         reg = <0xfdb00000 0x10000>;
1426                         reg-names = "kgsl_3d0_reg_memory";
1427                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
1428                         interrupt-names = "kgsl_3d0_irq";
1429                         clock-names = "core",
1430                                       "iface",
1431                                       "mem_iface";
1432                         clocks = <&mmcc OXILI_GFX3D_CLK>,
1433                                  <&mmcc OXILICX_AHB_CLK>,
1434                                  <&mmcc OXILICX_AXI_CLK>;
1435                         sram = <&gmu_sram>;
1436                         power-domains = <&mmcc OXILICX_GDSC>;
1437                         operating-points-v2 = <&gpu_opp_table>;
1438
1439                         interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>,
1440                                         <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>;
1441                         interconnect-names = "gfx-mem",
1442                                              "ocmem";
1443
1444                         // iommus = <&gpu_iommu 0>;
1445
1446                         gpu_opp_table: opp_table {
1447                                 compatible = "operating-points-v2";
1448
1449                                 opp-320000000 {
1450                                         opp-hz = /bits/ 64 <320000000>;
1451                                 };
1452
1453                                 opp-200000000 {
1454                                         opp-hz = /bits/ 64 <200000000>;
1455                                 };
1456
1457                                 opp-27000000 {
1458                                         opp-hz = /bits/ 64 <27000000>;
1459                                 };
1460                         };
1461                 };
1462
1463                 mdss: mdss@fd900000 {
1464                         status = "disabled";
1465
1466                         compatible = "qcom,mdss";
1467                         reg = <0xfd900000 0x100>,
1468                               <0xfd924000 0x1000>;
1469                         reg-names = "mdss_phys",
1470                                     "vbif_phys";
1471
1472                         power-domains = <&mmcc MDSS_GDSC>;
1473
1474                         clocks = <&mmcc MDSS_AHB_CLK>,
1475                                  <&mmcc MDSS_AXI_CLK>,
1476                                  <&mmcc MDSS_VSYNC_CLK>;
1477                         clock-names = "iface",
1478                                       "bus",
1479                                       "vsync";
1480
1481                         interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
1482
1483                         interrupt-controller;
1484                         #interrupt-cells = <1>;
1485
1486                         #address-cells = <1>;
1487                         #size-cells = <1>;
1488                         ranges;
1489
1490                         mdp: mdp@fd900000 {
1491                                 status = "disabled";
1492
1493                                 compatible = "qcom,mdp5";
1494                                 reg = <0xfd900100 0x22000>;
1495                                 reg-names = "mdp_phys";
1496
1497                                 interrupt-parent = <&mdss>;
1498                                 interrupts = <0 0>;
1499
1500                                 clocks = <&mmcc MDSS_AHB_CLK>,
1501                                          <&mmcc MDSS_AXI_CLK>,
1502                                          <&mmcc MDSS_MDP_CLK>,
1503                                          <&mmcc MDSS_VSYNC_CLK>;
1504                                 clock-names = "iface",
1505                                               "bus",
1506                                               "core",
1507                                               "vsync";
1508
1509                                 interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>;
1510                                 interconnect-names = "mdp0-mem";
1511
1512                                 ports {
1513                                         #address-cells = <1>;
1514                                         #size-cells = <0>;
1515
1516                                         port@0 {
1517                                                 reg = <0>;
1518                                                 mdp5_intf1_out: endpoint {
1519                                                         remote-endpoint = <&dsi0_in>;
1520                                                 };
1521                                         };
1522                                 };
1523                         };
1524
1525                         dsi0: dsi@fd922800 {
1526                                 status = "disabled";
1527
1528                                 compatible = "qcom,mdss-dsi-ctrl";
1529                                 reg = <0xfd922800 0x1f8>;
1530                                 reg-names = "dsi_ctrl";
1531
1532                                 interrupt-parent = <&mdss>;
1533                                 interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
1534
1535                                 assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
1536                                                   <&mmcc PCLK0_CLK_SRC>;
1537                                 assigned-clock-parents = <&dsi_phy0 0>,
1538                                                          <&dsi_phy0 1>;
1539
1540                                 clocks = <&mmcc MDSS_MDP_CLK>,
1541                                          <&mmcc MDSS_AHB_CLK>,
1542                                          <&mmcc MDSS_AXI_CLK>,
1543                                          <&mmcc MDSS_BYTE0_CLK>,
1544                                          <&mmcc MDSS_PCLK0_CLK>,
1545                                          <&mmcc MDSS_ESC0_CLK>,
1546                                          <&mmcc MMSS_MISC_AHB_CLK>;
1547                                 clock-names = "mdp_core",
1548                                               "iface",
1549                                               "bus",
1550                                               "byte",
1551                                               "pixel",
1552                                               "core",
1553                                               "core_mmss";
1554
1555                                 phys = <&dsi_phy0>;
1556                                 phy-names = "dsi-phy";
1557
1558                                 ports {
1559                                         #address-cells = <1>;
1560                                         #size-cells = <0>;
1561
1562                                         port@0 {
1563                                                 reg = <0>;
1564                                                 dsi0_in: endpoint {
1565                                                         remote-endpoint = <&mdp5_intf1_out>;
1566                                                 };
1567                                         };
1568
1569                                         port@1 {
1570                                                 reg = <1>;
1571                                                 dsi0_out: endpoint {
1572                                                 };
1573                                         };
1574                                 };
1575                         };
1576
1577                         dsi_phy0: dsi-phy@fd922a00 {
1578                                 status = "disabled";
1579
1580                                 compatible = "qcom,dsi-phy-28nm-hpm";
1581                                 reg = <0xfd922a00 0xd4>,
1582                                       <0xfd922b00 0x280>,
1583                                       <0xfd922d80 0x30>;
1584                                 reg-names = "dsi_pll",
1585                                             "dsi_phy",
1586                                             "dsi_phy_regulator";
1587
1588                                 #clock-cells = <1>;
1589                                 #phy-cells = <0>;
1590                                 qcom,dsi-phy-index = <0>;
1591
1592                                 clocks = <&mmcc MDSS_AHB_CLK>;
1593                                 clock-names = "iface";
1594                         };
1595                 };
1596
1597                 imem@fe805000 {
1598                         status = "disabled";
1599                         compatible = "syscon", "simple-mfd";
1600                         reg = <0xfe805000 0x1000>;
1601
1602                         reboot-mode {
1603                                 compatible = "syscon-reboot-mode";
1604                                 offset = <0x65c>;
1605                         };
1606                 };
1607         };
1608
1609         smd {
1610                 compatible = "qcom,smd";
1611
1612                 rpm {
1613                         interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
1614                         qcom,ipc = <&apcs 8 0>;
1615                         qcom,smd-edge = <15>;
1616
1617                         rpm_requests {
1618                                 compatible = "qcom,rpm-msm8974";
1619                                 qcom,smd-channels = "rpm_requests";
1620
1621                                 rpmcc: clock-controller {
1622                                         compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
1623                                         #clock-cells = <1>;
1624                                 };
1625
1626                                 pm8841-regulators {
1627                                         compatible = "qcom,rpm-pm8841-regulators";
1628
1629                                         pm8841_s1: s1 {};
1630                                         pm8841_s2: s2 {};
1631                                         pm8841_s3: s3 {};
1632                                         pm8841_s4: s4 {};
1633                                         pm8841_s5: s5 {};
1634                                         pm8841_s6: s6 {};
1635                                         pm8841_s7: s7 {};
1636                                         pm8841_s8: s8 {};
1637                                 };
1638
1639                                 pm8941-regulators {
1640                                         compatible = "qcom,rpm-pm8941-regulators";
1641
1642                                         pm8941_s1: s1 {};
1643                                         pm8941_s2: s2 {};
1644                                         pm8941_s3: s3 {};
1645
1646                                         pm8941_l1: l1 {};
1647                                         pm8941_l2: l2 {};
1648                                         pm8941_l3: l3 {};
1649                                         pm8941_l4: l4 {};
1650                                         pm8941_l5: l5 {};
1651                                         pm8941_l6: l6 {};
1652                                         pm8941_l7: l7 {};
1653                                         pm8941_l8: l8 {};
1654                                         pm8941_l9: l9 {};
1655                                         pm8941_l10: l10 {};
1656                                         pm8941_l11: l11 {};
1657                                         pm8941_l12: l12 {};
1658                                         pm8941_l13: l13 {};
1659                                         pm8941_l14: l14 {};
1660                                         pm8941_l15: l15 {};
1661                                         pm8941_l16: l16 {};
1662                                         pm8941_l17: l17 {};
1663                                         pm8941_l18: l18 {};
1664                                         pm8941_l19: l19 {};
1665                                         pm8941_l20: l20 {};
1666                                         pm8941_l21: l21 {};
1667                                         pm8941_l22: l22 {};
1668                                         pm8941_l23: l23 {};
1669                                         pm8941_l24: l24 {};
1670
1671                                         pm8941_lvs1: lvs1 {};
1672                                         pm8941_lvs2: lvs2 {};
1673                                         pm8941_lvs3: lvs3 {};
1674                                 };
1675                         };
1676                 };
1677         };
1678
1679         vreg_boost: vreg-boost {
1680                 compatible = "regulator-fixed";
1681
1682                 regulator-name = "vreg-boost";
1683                 regulator-min-microvolt = <3150000>;
1684                 regulator-max-microvolt = <3150000>;
1685
1686                 regulator-always-on;
1687                 regulator-boot-on;
1688
1689                 gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
1690                 enable-active-high;
1691
1692                 pinctrl-names = "default";
1693                 pinctrl-0 = <&boost_bypass_n_pin>;
1694         };
1695         vreg_vph_pwr: vreg-vph-pwr {
1696                 compatible = "regulator-fixed";
1697                 regulator-name = "vph-pwr";
1698
1699                 regulator-min-microvolt = <3600000>;
1700                 regulator-max-microvolt = <3600000>;
1701
1702                 regulator-always-on;
1703         };
1704 };