arch/arm/boot/dts/lpc32xx.dtsi

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * NXP LPC32xx SoC
   4  *
   5  * Copyright (C) 2015-2019 Vladimir Zapolskiy <vz@mleia.com>
   6  * Copyright 2012 Roland Stigge <stigge@antcom.de>
   7  */
   8
   9 #include <dt-bindings/clock/lpc32xx-clock.h>
  10 #include <dt-bindings/interrupt-controller/irq.h>
  11
  12 / {
  13         #address-cells = <1>;
  14         #size-cells = <1>;
  15         compatible = "nxp,lpc3220";
  16         interrupt-parent = <&mic>;
  17
  18         cpus {
  19                 #address-cells = <1>;
  20                 #size-cells = <0>;
  21
  22                 cpu@0 {
  23                         compatible = "arm,arm926ej-s";
  24                         device_type = "cpu";
  25                         reg = <0x0>;
  26                 };
  27         };
  28
  29         clocks {
  30                 xtal_32k: xtal_32k {
  31                         compatible = "fixed-clock";
  32                         #clock-cells = <0>;
  33                         clock-frequency = <32768>;
  34                         clock-output-names = "xtal_32k";
  35                 };
  36
  37                 xtal: xtal {
  38                         compatible = "fixed-clock";
  39                         #clock-cells = <0>;
  40                         clock-frequency = <13000000>;
  41                         clock-output-names = "xtal";
  42                 };
  43         };
  44
  45         ahb {
  46                 #address-cells = <1>;
  47                 #size-cells = <1>;
  48                 compatible = "simple-bus";
  49                 ranges = <0x00000000 0x00000000 0x10000000>,
  50                          <0x20000000 0x20000000 0x30000000>,
  51                          <0xe0000000 0xe0000000 0x04000000>;
  52
  53                 iram: sram@8000000 {
  54                         compatible = "mmio-sram";
  55                         reg = <0x08000000 0x20000>;
  56
  57                         #address-cells = <1>;
  58                         #size-cells = <1>;
  59                         ranges = <0x00000000 0x08000000 0x20000>;
  60                 };
  61
  62                 /*
  63                  * Enable either SLC or MLC
  64                  */
  65                 slc: flash@20020000 {
  66                         compatible = "nxp,lpc3220-slc";
  67                         reg = <0x20020000 0x1000>;
  68                         clocks = <&clk LPC32XX_CLK_SLC>;
  69                         status = "disabled";
  70                 };
  71
  72                 mlc: flash@200a8000 {
  73                         compatible = "nxp,lpc3220-mlc";
  74                         reg = <0x200a8000 0x11000>;
  75                         interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
  76                         clocks = <&clk LPC32XX_CLK_MLC>;
  77                         status = "disabled";
  78                 };
  79
  80                 dma: dma@31000000 {
  81                         compatible = "arm,pl080", "arm,primecell";
  82                         reg = <0x31000000 0x1000>;
  83                         interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
  84                         clocks = <&clk LPC32XX_CLK_DMA>;
  85                         clock-names = "apb_pclk";
  86                 };
  87
  88                 usb {
  89                         #address-cells = <1>;
  90                         #size-cells = <1>;
  91                         compatible = "simple-bus";
  92                         ranges = <0x0 0x31020000 0x00001000>;
  93
  94                         /*
  95                          * Enable either ohci or usbd (gadget)!
  96                          */
  97                         ohci: ohci@0 {
  98                                 compatible = "nxp,ohci-nxp", "usb-ohci";
  99                                 reg = <0x0 0x300>;
 100                                 interrupt-parent = <&sic1>;
 101                                 interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
 102                                 clocks = <&usbclk LPC32XX_USB_CLK_HOST>;
 103                                 status = "disabled";
 104                         };
 105
 106                         usbd: usbd@0 {
 107                                 compatible = "nxp,lpc3220-udc";
 108                                 reg = <0x0 0x300>;
 109                                 interrupt-parent = <&sic1>;
 110                                 interrupts = <29 IRQ_TYPE_LEVEL_HIGH>,
 111                                              <30 IRQ_TYPE_LEVEL_HIGH>,
 112                                              <28 IRQ_TYPE_LEVEL_HIGH>,
 113                                              <26 IRQ_TYPE_LEVEL_LOW>;
 114                                 clocks = <&usbclk LPC32XX_USB_CLK_DEVICE>;
 115                                 status = "disabled";
 116                         };
 117
 118                         i2cusb: i2c@300 {
 119                                 compatible = "nxp,pnx-i2c";
 120                                 reg = <0x300 0x100>;
 121                                 interrupt-parent = <&sic1>;
 122                                 interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
 123                                 clocks = <&usbclk LPC32XX_USB_CLK_I2C>;
 124                                 #address-cells = <1>;
 125                                 #size-cells = <0>;
 126                         };
 127
 128                         usbclk: clock-controller@f00 {
 129                                 compatible = "nxp,lpc3220-usb-clk";
 130                                 reg = <0xf00 0x100>;
 131                                 #clock-cells = <1>;
 132                         };
 133                 };
 134
 135                 clcd: clcd@31040000 {
 136                         compatible = "arm,pl111", "arm,primecell";
 137                         reg = <0x31040000 0x1000>;
 138                         interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
 139                         clocks = <&clk LPC32XX_CLK_LCD>, <&clk LPC32XX_CLK_LCD>;
 140                         clock-names = "clcdclk", "apb_pclk";
 141                         status = "disabled";
 142                 };
 143
 144                 mac: ethernet@31060000 {
 145                         compatible = "nxp,lpc-eth";
 146                         reg = <0x31060000 0x1000>;
 147                         interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
 148                         clocks = <&clk LPC32XX_CLK_MAC>;
 149                         status = "disabled";
 150                 };
 151
 152                 emc: memory-controller@31080000 {
 153                         compatible = "arm,pl175", "arm,primecell";
 154                         reg = <0x31080000 0x1000>;
 155                         clocks = <&clk LPC32XX_CLK_DDRAM>, <&clk LPC32XX_CLK_DDRAM>;
 156                         clock-names = "mpmcclk", "apb_pclk";
 157                         #address-cells = <1>;
 158                         #size-cells = <1>;
 159
 160                         ranges = <0 0xe0000000 0x01000000>,
 161                                  <1 0xe1000000 0x01000000>,
 162                                  <2 0xe2000000 0x01000000>,
 163                                  <3 0xe3000000 0x01000000>;
 164                         status = "disabled";
 165                 };
 166
 167                 apb {
 168                         #address-cells = <1>;
 169                         #size-cells = <1>;
 170                         compatible = "simple-bus";
 171                         ranges = <0x20000000 0x20000000 0x30000000>;
 172
 173                         /*
 174                          * ssp0 and spi1 are shared pins;
 175                          * enable one in your board dts, as needed.
 176                          */
 177                         ssp0: spi@20084000 {
 178                                 compatible = "arm,pl022", "arm,primecell";
 179                                 reg = <0x20084000 0x1000>;
 180                                 interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
 181                                 clocks = <&clk LPC32XX_CLK_SSP0>;
 182                                 clock-names = "apb_pclk";
 183                                 #address-cells = <1>;
 184                                 #size-cells = <0>;
 185                                 status = "disabled";
 186                         };
 187
 188                         spi1: spi@20088000 {
 189                                 compatible = "nxp,lpc3220-spi";
 190                                 reg = <0x20088000 0x1000>;
 191                                 clocks = <&clk LPC32XX_CLK_SPI1>;
 192                                 #address-cells = <1>;
 193                                 #size-cells = <0>;
 194                                 status = "disabled";
 195                         };
 196
 197                         /*
 198                          * ssp1 and spi2 are shared pins;
 199                          * enable one in your board dts, as needed.
 200                          */
 201                         ssp1: spi@2008c000 {
 202                                 compatible = "arm,pl022", "arm,primecell";
 203                                 reg = <0x2008c000 0x1000>;
 204                                 interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
 205                                 clocks = <&clk LPC32XX_CLK_SSP1>;
 206                                 clock-names = "apb_pclk";
 207                                 #address-cells = <1>;
 208                                 #size-cells = <0>;
 209                                 status = "disabled";
 210                         };
 211
 212                         spi2: spi@20090000 {
 213                                 compatible = "nxp,lpc3220-spi";
 214                                 reg = <0x20090000 0x1000>;
 215                                 clocks = <&clk LPC32XX_CLK_SPI2>;
 216                                 #address-cells = <1>;
 217                                 #size-cells = <0>;
 218                                 status = "disabled";
 219                         };
 220
 221                         i2s0: i2s@20094000 {
 222                                 compatible = "nxp,lpc3220-i2s";
 223                                 reg = <0x20094000 0x1000>;
 224                                 status = "disabled";
 225                         };
 226
 227                         sd: sd@20098000 {
 228                                 compatible = "arm,pl18x", "arm,primecell";
 229                                 reg = <0x20098000 0x1000>;
 230                                 interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
 231                                              <13 IRQ_TYPE_LEVEL_HIGH>;
 232                                 clocks = <&clk LPC32XX_CLK_SD>;
 233                                 clock-names = "apb_pclk";
 234                                 status = "disabled";
 235                         };
 236
 237                         i2s1: i2s@2009c000 {
 238                                 compatible = "nxp,lpc3220-i2s";
 239                                 reg = <0x2009c000 0x1000>;
 240                                 status = "disabled";
 241                         };
 242
 243                         /* UART5 first since it is the default console, ttyS0 */
 244                         uart5: serial@40090000 {
 245                                 /* actually, ns16550a w/ 64 byte fifos! */
 246                                 compatible = "nxp,lpc3220-uart";
 247                                 reg = <0x40090000 0x1000>;
 248                                 interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
 249                                 reg-shift = <2>;
 250                                 clocks = <&clk LPC32XX_CLK_UART5>;
 251                                 status = "disabled";
 252                         };
 253
 254                         uart3: serial@40080000 {
 255                                 compatible = "nxp,lpc3220-uart";
 256                                 reg = <0x40080000 0x1000>;
 257                                 interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 258                                 reg-shift = <2>;
 259                                 clocks = <&clk LPC32XX_CLK_UART3>;
 260                                 status = "disabled";
 261                         };
 262
 263                         uart4: serial@40088000 {
 264                                 compatible = "nxp,lpc3220-uart";
 265                                 reg = <0x40088000 0x1000>;
 266                                 interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
 267                                 reg-shift = <2>;
 268                                 clocks = <&clk LPC32XX_CLK_UART4>;
 269                                 status = "disabled";
 270                         };
 271
 272                         uart6: serial@40098000 {
 273                                 compatible = "nxp,lpc3220-uart";
 274                                 reg = <0x40098000 0x1000>;
 275                                 interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
 276                                 reg-shift = <2>;
 277                                 clocks = <&clk LPC32XX_CLK_UART6>;
 278                                 status = "disabled";
 279                         };
 280
 281                         i2c1: i2c@400a0000 {
 282                                 compatible = "nxp,pnx-i2c";
 283                                 reg = <0x400a0000 0x100>;
 284                                 interrupt-parent = <&sic1>;
 285                                 interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 286                                 #address-cells = <1>;
 287                                 #size-cells = <0>;
 288                                 clocks = <&clk LPC32XX_CLK_I2C1>;
 289                         };
 290
 291                         i2c2: i2c@400a8000 {
 292                                 compatible = "nxp,pnx-i2c";
 293                                 reg = <0x400a8000 0x100>;
 294                                 interrupt-parent = <&sic1>;
 295                                 interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
 296                                 #address-cells = <1>;
 297                                 #size-cells = <0>;
 298                                 clocks = <&clk LPC32XX_CLK_I2C2>;
 299                         };
 300
 301                         mpwm: mpwm@400e8000 {
 302                                 compatible = "nxp,lpc3220-motor-pwm";
 303                                 reg = <0x400e8000 0x78>;
 304                                 status = "disabled";
 305                                 #pwm-cells = <2>;
 306                         };
 307                 };
 308
 309                 fab {
 310                         #address-cells = <1>;
 311                         #size-cells = <1>;
 312                         compatible = "simple-bus";
 313                         ranges = <0x20000000 0x20000000 0x30000000>;
 314
 315                         /* System Control Block */
 316                         scb {
 317                                 compatible = "simple-bus";
 318                                 ranges = <0x0 0x040004000 0x00001000>;
 319                                 #address-cells = <1>;
 320                                 #size-cells = <1>;
 321
 322                                 clk: clock-controller@0 {
 323                                         compatible = "nxp,lpc3220-clk";
 324                                         reg = <0x00 0x114>;
 325                                         #clock-cells = <1>;
 326
 327                                         clocks = <&xtal_32k>, <&xtal>;
 328                                         clock-names = "xtal_32k", "xtal";
 329
 330                                         assigned-clocks = <&clk LPC32XX_CLK_HCLK_PLL>;
 331                                         assigned-clock-rates = <208000000>;
 332                                 };
 333                         };
 334
 335                         mic: interrupt-controller@40008000 {
 336                                 compatible = "nxp,lpc3220-mic";
 337                                 reg = <0x40008000 0x4000>;
 338                                 interrupt-controller;
 339                                 #interrupt-cells = <2>;
 340                         };
 341
 342                         sic1: interrupt-controller@4000c000 {
 343                                 compatible = "nxp,lpc3220-sic";
 344                                 reg = <0x4000c000 0x4000>;
 345                                 interrupt-controller;
 346                                 #interrupt-cells = <2>;
 347
 348                                 interrupt-parent = <&mic>;
 349                                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>,
 350                                              <30 IRQ_TYPE_LEVEL_LOW>;
 351                                 };
 352
 353                         sic2: interrupt-controller@40010000 {
 354                                 compatible = "nxp,lpc3220-sic";
 355                                 reg = <0x40010000 0x4000>;
 356                                 interrupt-controller;
 357                                 #interrupt-cells = <2>;
 358
 359                                 interrupt-parent = <&mic>;
 360                                 interrupts = <1 IRQ_TYPE_LEVEL_LOW>,
 361                                              <31 IRQ_TYPE_LEVEL_LOW>;
 362                         };
 363
 364                         uart1: serial@40014000 {
 365                                 compatible = "nxp,lpc3220-hsuart";
 366                                 reg = <0x40014000 0x1000>;
 367                                 interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
 368                                 status = "disabled";
 369                         };
 370
 371                         uart2: serial@40018000 {
 372                                 compatible = "nxp,lpc3220-hsuart";
 373                                 reg = <0x40018000 0x1000>;
 374                                 interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
 375                                 status = "disabled";
 376                         };
 377
 378                         uart7: serial@4001c000 {
 379                                 compatible = "nxp,lpc3220-hsuart";
 380                                 reg = <0x4001c000 0x1000>;
 381                                 interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
 382                                 status = "disabled";
 383                         };
 384
 385                         rtc: rtc@40024000 {
 386                                 compatible = "nxp,lpc3220-rtc";
 387                                 reg = <0x40024000 0x1000>;
 388                                 interrupt-parent = <&sic1>;
 389                                 interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
 390                                 clocks = <&clk LPC32XX_CLK_RTC>;
 391                         };
 392
 393                         gpio: gpio@40028000 {
 394                                 compatible = "nxp,lpc3220-gpio";
 395                                 reg = <0x40028000 0x1000>;
 396                                 gpio-controller;
 397                                 #gpio-cells = <3>; /* bank, pin, flags */
 398                         };
 399
 400                         timer4: timer@4002c000 {
 401                                 compatible = "nxp,lpc3220-timer";
 402                                 reg = <0x4002c000 0x1000>;
 403                                 interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 404                                 clocks = <&clk LPC32XX_CLK_TIMER4>;
 405                                 clock-names = "timerclk";
 406                                 status = "disabled";
 407                         };
 408
 409                         timer5: timer@40030000 {
 410                                 compatible = "nxp,lpc3220-timer";
 411                                 reg = <0x40030000 0x1000>;
 412                                 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 413                                 clocks = <&clk LPC32XX_CLK_TIMER5>;
 414                                 clock-names = "timerclk";
 415                                 status = "disabled";
 416                         };
 417
 418                         watchdog: watchdog@4003c000 {
 419                                 compatible = "nxp,pnx4008-wdt";
 420                                 reg = <0x4003c000 0x1000>;
 421                                 clocks = <&clk LPC32XX_CLK_WDOG>;
 422                         };
 423
 424                         timer0: timer@40044000 {
 425                                 compatible = "nxp,lpc3220-timer";
 426                                 reg = <0x40044000 0x1000>;
 427                                 clocks = <&clk LPC32XX_CLK_TIMER0>;
 428                                 clock-names = "timerclk";
 429                                 interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
 430                         };
 431
 432                         /*
 433                          * TSC vs. ADC: Since those two share the same
 434                          * hardware, you need to choose from one of the
 435                          * following two and do 'status = "okay";' for one of
 436                          * them
 437                          */
 438
 439                         adc: adc@40048000 {
 440                                 compatible = "nxp,lpc3220-adc";
 441                                 reg = <0x40048000 0x1000>;
 442                                 interrupt-parent = <&sic1>;
 443                                 interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 444                                 clocks = <&clk LPC32XX_CLK_ADC>;
 445                                 status = "disabled";
 446                         };
 447
 448                         tsc: tsc@40048000 {
 449                                 compatible = "nxp,lpc3220-tsc";
 450                                 reg = <0x40048000 0x1000>;
 451                                 interrupt-parent = <&sic1>;
 452                                 interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 453                                 clocks = <&clk LPC32XX_CLK_ADC>;
 454                                 status = "disabled";
 455                         };
 456
 457                         timer1: timer@4004c000 {
 458                                 compatible = "nxp,lpc3220-timer";
 459                                 reg = <0x4004c000 0x1000>;
 460                                 interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
 461                                 clocks = <&clk LPC32XX_CLK_TIMER1>;
 462                                 clock-names = "timerclk";
 463                         };
 464
 465                         key: key@40050000 {
 466                                 compatible = "nxp,lpc3220-key";
 467                                 reg = <0x40050000 0x1000>;
 468                                 clocks = <&clk LPC32XX_CLK_KEY>;
 469                                 interrupt-parent = <&sic1>;
 470                                 interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
 471                                 status = "disabled";
 472                         };
 473
 474                         timer2: timer@40058000 {
 475                                 compatible = "nxp,lpc3220-timer";
 476                                 reg = <0x40058000 0x1000>;
 477                                 interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
 478                                 clocks = <&clk LPC32XX_CLK_TIMER2>;
 479                                 clock-names = "timerclk";
 480                                 status = "disabled";
 481                         };
 482
 483                         pwm1: pwm@4005c000 {
 484                                 compatible = "nxp,lpc3220-pwm";
 485                                 reg = <0x4005c000 0x4>;
 486                                 clocks = <&clk LPC32XX_CLK_PWM1>;
 487                                 assigned-clocks = <&clk LPC32XX_CLK_PWM1>;
 488                                 assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
 489                                 status = "disabled";
 490                         };
 491
 492                         pwm2: pwm@4005c004 {
 493                                 compatible = "nxp,lpc3220-pwm";
 494                                 reg = <0x4005c004 0x4>;
 495                                 clocks = <&clk LPC32XX_CLK_PWM2>;
 496                                 assigned-clocks = <&clk LPC32XX_CLK_PWM2>;
 497                                 assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
 498                                 status = "disabled";
 499                         };
 500
 501                         timer3: timer@40060000 {
 502                                 compatible = "nxp,lpc3220-timer";
 503                                 reg = <0x40060000 0x1000>;
 504                                 interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 505                                 clocks = <&clk LPC32XX_CLK_TIMER3>;
 506                                 clock-names = "timerclk";
 507                                 status = "disabled";
 508                         };
 509                 };
 510         };
 511 };