arch/arm/boot/dts/exynos4412-p4note.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Samsung's Exynos4412 based p4note device family base DT.
   4  * Based on exynos4412-midas.dtsi.
   5  *
   6  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
   7  *              http://www.samsung.com
   8  */
   9
  10 /dts-v1/;
  11 #include "exynos4412.dtsi"
  12 #include "exynos4412-ppmu-common.dtsi"
  13
  14 #include <dt-bindings/clock/maxim,max77686.h>
  15 #include <dt-bindings/gpio/gpio.h>
  16 #include <dt-bindings/input/linux-event-codes.h>
  17 #include <dt-bindings/interrupt-controller/irq.h>
  18 #include <dt-bindings/pinctrl/samsung.h>
  19
  20 / {
  21         compatible = "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";
  22
  23         memory@40000000 {
  24                 device_type = "memory";
  25                 reg = <0x40000000 0x80000000>;
  26         };
  27
  28         chosen {
  29                 stdout-path = &serial_2;
  30         };
  31
  32         firmware@204f000 {
  33                 compatible = "samsung,secure-firmware";
  34                 reg = <0x0204F000 0x1000>;
  35         };
  36
  37         fixed-rate-clocks {
  38                 xxti {
  39                         compatible = "samsung,clock-xxti";
  40                         clock-frequency = <0>;
  41                 };
  42
  43                 xusbxti {
  44                         compatible = "samsung,clock-xusbxti";
  45                         clock-frequency = <24000000>;
  46                 };
  47         };
  48
  49         gpio-keys {
  50                 compatible = "gpio-keys";
  51                 pinctrl-names = "default";
  52                 pinctrl-0 = <&gpio_keys>;
  53
  54                 key-down {
  55                         gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
  56                         linux,code = <KEY_VOLUMEDOWN>;
  57                         label = "volume down";
  58                         debounce-interval = <10>;
  59                 };
  60
  61                 key-up {
  62                         gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
  63                         linux,code = <KEY_VOLUMEUP>;
  64                         label = "volume up";
  65                         debounce-interval = <10>;
  66                 };
  67
  68                 key-power {
  69                         gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
  70                         linux,code = <KEY_POWER>;
  71                         label = "power";
  72                         debounce-interval = <10>;
  73                         wakeup-source;
  74                 };
  75         };
  76
  77         voltage-regulator-1 {
  78                 compatible = "regulator-fixed";
  79                 regulator-name = "TSP_LDO1";
  80                 pinctrl-names = "default";
  81                 pinctrl-0 = <&tsp_reg_gpio_1>;
  82                 gpios = <&gpm4 5 GPIO_ACTIVE_HIGH>;
  83                 enable-active-high;
  84                 regulator-always-on;
  85         };
  86
  87         voltage-regulator-2 {
  88                 compatible = "regulator-fixed";
  89                 regulator-name = "TSP_LDO2";
  90                 pinctrl-names = "default";
  91                 pinctrl-0 = <&tsp_reg_gpio_2>;
  92                 gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
  93                 enable-active-high;
  94                 regulator-always-on;
  95         };
  96
  97         voltage-regulator-3 {
  98                 compatible = "regulator-fixed";
  99                 regulator-name = "TSP_LDO3";
 100                 pinctrl-names = "default";
 101                 pinctrl-0 = <&tsp_reg_gpio_3>;
 102                 gpios = <&gpb 7 GPIO_ACTIVE_HIGH>;
 103                 startup-delay-us = <20000>;
 104                 enable-active-high;
 105                 regulator-always-on;
 106         };
 107
 108         wlan_pwrseq: sdhci3-pwrseq {
 109                 compatible = "mmc-pwrseq-simple";
 110                 reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>;
 111                 pinctrl-0 = <&wifi_reset>;
 112                 pinctrl-names = "default";
 113                 clocks = <&max77686 MAX77686_CLK_PMIC>;
 114                 clock-names = "ext_clock";
 115         };
 116
 117         i2c-gpio-1 {
 118                 compatible = "i2c-gpio";
 119                 sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 120                 scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 121                 i2c-gpio,delay-us = <2>;
 122                 #address-cells = <1>;
 123                 #size-cells = <0>;
 124
 125                 magnetometer@c {
 126                         compatible = "asahi-kasei,ak8975";
 127                         reg = <0x0c>;
 128                         pinctrl-0 = <&ak8975_irq>;
 129                         pinctrl-names = "default";
 130                         interrupt-parent = <&gpm4>;
 131                         interrupts = <7 IRQ_TYPE_EDGE_RISING>;
 132                 };
 133         };
 134
 135         i2c-gpio-2 {
 136                 compatible = "i2c-gpio";
 137                 sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 138                 scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 139                 i2c-gpio,delay-us = <2>;
 140                 #address-cells = <1>;
 141                 #size-cells = <0>;
 142
 143                 fuel-gauge@36 {
 144                         compatible = "maxim,max17042";
 145                         reg = <0x36>;
 146                         pinctrl-0 = <&fuel_alert_irq>;
 147                         pinctrl-names = "default";
 148                         interrupt-parent = <&gpx2>;
 149                         interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 150                         maxim,rsns-microohm = <10000>;
 151                         maxim,over-heat-temp = <600>;
 152                         maxim,over-volt = <4300>;
 153                 };
 154         };
 155
 156         i2c-gpio-3 {
 157                 compatible = "i2c-gpio";
 158                 sda-gpios = <&gpm4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 159                 scl-gpios = <&gpm4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 160                 i2c-gpio,delay-us = <5>;
 161                 #address-cells = <1>;
 162                 #size-cells = <0>;
 163
 164                 adc@41 {
 165                         compatible = "st,stmpe811";
 166                         reg = <0x41>;
 167                         pinctrl-0 = <&stmpe_adc_irq>;
 168                         pinctrl-names = "default";
 169                         interrupt-parent = <&gpx0>;
 170                         interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 171                         interrupt-controller;
 172                         irq-trigger = <0x1>;
 173                         st,adc-freq = <3>;
 174                         st,mod-12b = <1>;
 175                         st,ref-sel = <0>;
 176                         st,sample-time = <3>;
 177
 178                         stmpe_adc {
 179                                 compatible = "st,stmpe-adc";
 180                                 #io-channel-cells = <1>;
 181                                 st,norequest-mask = <0x2F>;
 182                         };
 183                 };
 184         };
 185 };
 186
 187 &adc {
 188         vdd-supply = <&ldo3_reg>;
 189         /* not verified */
 190         status = "okay";
 191 };
 192
 193 &bus_dmc {
 194         devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
 195         vdd-supply = <&buck1_reg>;
 196         status = "okay";
 197 };
 198
 199 &bus_acp {
 200         devfreq = <&bus_dmc>;
 201         status = "okay";
 202 };
 203
 204 &bus_c2c {
 205         devfreq = <&bus_dmc>;
 206         status = "okay";
 207 };
 208
 209 &bus_leftbus {
 210         devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
 211         vdd-supply = <&buck3_reg>;
 212         status = "okay";
 213 };
 214
 215 &bus_rightbus {
 216         devfreq = <&bus_leftbus>;
 217         status = "okay";
 218 };
 219
 220 &bus_display {
 221         devfreq = <&bus_leftbus>;
 222         status = "okay";
 223 };
 224
 225 &bus_fsys {
 226         devfreq = <&bus_leftbus>;
 227         status = "okay";
 228 };
 229
 230 &bus_peri {
 231         devfreq = <&bus_leftbus>;
 232         status = "okay";
 233 };
 234
 235 &bus_mfc {
 236         devfreq = <&bus_leftbus>;
 237         status = "okay";
 238 };
 239
 240 &cpu0 {
 241         cpu0-supply = <&buck2_reg>;
 242 };
 243
 244 &cpu_thermal {
 245         cooling-maps {
 246                 map0 {
 247                         /* Corresponds to 800MHz at freq_table */
 248                         cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
 249                                          <&cpu2 7 7>, <&cpu3 7 7>;
 250                 };
 251                 map1 {
 252                         /* Corresponds to 200MHz at freq_table */
 253                         cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
 254                                          <&cpu2 13 13>, <&cpu3 13 13>;
 255                 };
 256         };
 257 };
 258
 259 &exynos_usbphy {
 260         status = "okay";
 261 };
 262
 263 &fimd {
 264         pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
 265         pinctrl-names = "default";
 266         status = "okay";
 267
 268         display-timings {
 269                 timing0 {
 270                         clock-frequency = <66666666>;
 271                         hactive = <1280>;
 272                         vactive = <800>;
 273                         hfront-porch = <18>;
 274                         hback-porch = <36>;
 275                         hsync-len = <16>;
 276                         vback-porch = <16>;
 277                         vfront-porch = <4>;
 278                         vsync-len = <3>;
 279                         hsync-active = <1>;
 280                 };
 281         };
 282 };
 283
 284 &gpu {
 285         mali-supply = <&buck4_reg>;
 286         status = "okay";
 287 };
 288
 289 &hsotg {
 290         vusb_a-supply = <&ldo12_reg>;
 291         dr_mode = "peripheral";
 292         status = "okay";
 293 };
 294
 295 &i2c_3 {
 296         samsung,i2c-sda-delay = <100>;
 297         samsung,i2c-slave-addr = <0x10>;
 298         samsung,i2c-max-bus-freq = <400000>;
 299         pinctrl-0 = <&i2c3_bus>;
 300         pinctrl-names = "default";
 301         status = "okay";
 302
 303         touchscreen@4a {
 304                 compatible = "atmel,maxtouch";
 305                 reg = <0x4a>;
 306                 pinctrl-0 = <&tsp_rst &tsp_irq>;
 307                 pinctrl-names = "default";
 308                 interrupt-parent = <&gpm2>;
 309                 interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 310                 reset-gpios = <&gpm0 4 GPIO_ACTIVE_LOW>;
 311         };
 312 };
 313
 314 &i2c_7 {
 315         samsung,i2c-sda-delay = <100>;
 316         samsung,i2c-slave-addr = <0x10>;
 317         samsung,i2c-max-bus-freq = <400000>;
 318         pinctrl-0 = <&i2c7_bus>;
 319         pinctrl-names = "default";
 320         status = "okay";
 321
 322         max77686: pmic@9 {
 323                 compatible = "maxim,max77686";
 324                 interrupt-parent = <&gpx0>;
 325                 interrupts = <7 IRQ_TYPE_NONE>;
 326                 pinctrl-0 = <&max77686_irq>;
 327                 pinctrl-names = "default";
 328                 reg = <0x09>;
 329                 #clock-cells = <1>;
 330
 331                 voltage-regulators {
 332                         ldo1_reg: LDO1 {
 333                                 regulator-name = "ldo1";
 334                                 regulator-always-on;
 335                         };
 336
 337                         ldo2_reg: LDO2 {
 338                                 regulator-name = "ldo2";
 339                                 regulator-always-on;
 340                         };
 341
 342                         /* WM8994 audio */
 343                         ldo3_reg: LDO3 {
 344                                 regulator-name = "VCC_1.8V_AP";
 345                                 regulator-min-microvolt = <1800000>;
 346                                 regulator-max-microvolt = <1800000>;
 347                                 regulator-always-on;
 348                                 regulator-boot-on;
 349
 350                                 regulator-state-mem {
 351                                         regulator-on-in-suspend;
 352                                 };
 353                         };
 354
 355                         ldo4_reg: LDO4 {
 356                                 regulator-name = "ldo4";
 357                                 regulator-always-on;
 358                         };
 359
 360                         ldo5_reg: LDO5 {
 361                                 regulator-name = "VCC_1.8V_IO";
 362                                 regulator-min-microvolt = <1800000>;
 363                                 regulator-max-microvolt = <1800000>;
 364
 365                                 regulator-state-mem {
 366                                         regulator-off-in-suspend;
 367                                 };
 368                         };
 369
 370                         ldo6_reg: LDO6 {
 371                                 regulator-name = "ldo6";
 372                                 regulator-always-on;
 373                         };
 374
 375                         ldo7_reg: LDO7 {
 376                                 regulator-name = "ldo7";
 377                                 regulator-always-on;
 378                         };
 379
 380                         /* CSI IP block */
 381                         ldo8_reg: LDO8 {
 382                                 regulator-name = "VMIPI_1.0V";
 383                                 regulator-min-microvolt = <1000000>;
 384                                 regulator-max-microvolt = <1000000>;
 385                                 regulator-always-on;
 386                                 regulator-boot-on;
 387
 388                                 regulator-state-mem {
 389                                         regulator-on-in-suspend;
 390                                 };
 391                         };
 392
 393                         /* IR LED on/off */
 394                         ldo9_reg: LDO9 {
 395                                 regulator-name = "VLED_IC_1.9V";
 396                                 regulator-min-microvolt = <1950000>;
 397                                 regulator-max-microvolt = <1950000>;
 398
 399                                 regulator-state-mem {
 400                                         regulator-off-in-suspend;
 401                                 };
 402                         };
 403
 404                         /* CSI IP block */
 405                         ldo10_reg: LDO10 {
 406                                 regulator-name = "VMIPI_1.8V";
 407                                 regulator-min-microvolt = <1800000>;
 408                                 regulator-max-microvolt = <1800000>;
 409                                 regulator-always-on;
 410                                 regulator-boot-on;
 411
 412                                 regulator-state-mem {
 413                                         regulator-on-in-suspend;
 414                                 };
 415                         };
 416
 417                         ldo11_reg: LDO11 {
 418                                 regulator-name = "VABB1_1.9V";
 419                                 regulator-min-microvolt = <1950000>;
 420                                 regulator-max-microvolt = <1950000>;
 421                                 regulator-always-on;
 422                                 regulator-boot-on;
 423
 424                                 regulator-state-mem {
 425                                         regulator-off-in-suspend;
 426                                 };
 427                         };
 428
 429                         /* USB OTG */
 430                         ldo12_reg: LDO12 {
 431                                 regulator-name = "VUOTG_3.0V";
 432                                 regulator-min-microvolt = <3000000>;
 433                                 regulator-max-microvolt = <3000000>;
 434                                 regulator-always-on;
 435                                 regulator-boot-on;
 436
 437                                 regulator-state-mem {
 438                                         regulator-on-in-suspend;
 439                                 };
 440                         };
 441
 442                         /* not connected */
 443                         ldo13_reg: LDO13 {
 444                                 regulator-name = "ldo13";
 445                         };
 446
 447                         ldo14_reg: LDO14 {
 448                                 regulator-name = "VABB2_1.9V";
 449                                 regulator-min-microvolt = <1950000>;
 450                                 regulator-max-microvolt = <1950000>;
 451                                 regulator-always-on;
 452                                 regulator-boot-on;
 453
 454                                 regulator-state-mem {
 455                                         regulator-off-in-suspend;
 456                                 };
 457                         };
 458
 459                         ldo15_reg: LDO15 {
 460                                 regulator-name = "ldo15";
 461                                 regulator-always-on;
 462                         };
 463
 464                         ldo16_reg: LDO16 {
 465                                 regulator-name = "ldo16";
 466                                 regulator-always-on;
 467                         };
 468
 469                         /* not connected */
 470                         ldo17_reg: LDO17 {
 471                                 regulator-name = "ldo17";
 472                         };
 473
 474                         /* Camera ISX012 */
 475                         ldo18_reg: LDO18 {
 476                                 regulator-name = "CAM_IO_1.8V";
 477                                 regulator-min-microvolt = <1800000>;
 478                                 regulator-max-microvolt = <1800000>;
 479
 480                                 regulator-state-mem {
 481                                         regulator-off-in-suspend;
 482                                 };
 483                         };
 484
 485                         /* Camera S5K6A3 */
 486                         ldo19_reg: LDO19 {
 487                                 regulator-name = "VT_CORE_1.8V";
 488                                 regulator-min-microvolt = <1800000>;
 489                                 regulator-max-microvolt = <1800000>;
 490
 491                                 regulator-state-mem {
 492                                         regulator-off-in-suspend;
 493                                 };
 494                         };
 495
 496                         /* not connected */
 497                         ldo20_reg: LDO20 {
 498                                 regulator-name = "ldo20";
 499                         };
 500
 501                         /* MMC2 */
 502                         ldo21_reg: LDO21 {
 503                                 regulator-name = "VTF_2.8V";
 504                                 regulator-min-microvolt = <2800000>;
 505                                 regulator-max-microvolt = <2800000>;
 506                                 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
 507                         };
 508
 509                         /* not connected */
 510                         ldo22_reg: LDO22 {
 511                                 regulator-name = "ldo22";
 512                         };
 513
 514                         /* ADC */
 515                         ldo23_reg: LDO23 {
 516                                 regulator-name = "VDD_ADC_3.3V";
 517                                 regulator-min-microvolt = <3300000>;
 518                                 regulator-max-microvolt = <3300000>;
 519                                 regulator-always-on;
 520                                 regulator-boot-on;
 521
 522                                 regulator-state-mem {
 523                                         regulator-off-in-suspend;
 524                                 };
 525                         };
 526
 527                         /* Camera S5K6A3 */
 528                         ldo24_reg: LDO24 {
 529                                 regulator-name = "CAM_A2.8V";
 530                                 regulator-min-microvolt = <2800000>;
 531                                 regulator-max-microvolt = <2800000>;
 532
 533                                 regulator-state-mem {
 534                                         regulator-off-in-suspend;
 535                                 };
 536                         };
 537
 538                         ldo25_reg: LDO25 {
 539                                 regulator-name = "VLED_3.3V";
 540                                 regulator-min-microvolt = <3300000>;
 541                                 regulator-max-microvolt = <3300000>;
 542
 543                                 regulator-state-mem {
 544                                         regulator-off-in-suspend;
 545                                 };
 546                         };
 547
 548                         /* Camera ISX012 */
 549                         ldo26_reg: LDO26 {
 550                                 regulator-name = "3MP_AF_2.8V";
 551                                 regulator-min-microvolt = <2800000>;
 552                                 regulator-max-microvolt = <2800000>;
 553
 554                                 regulator-state-mem {
 555                                         regulator-off-in-suspend;
 556                                 };
 557                         };
 558
 559                         buck1_reg: BUCK1 {
 560                                 regulator-name = "VDD_MIF";
 561                                 regulator-min-microvolt = <850000>;
 562                                 regulator-max-microvolt = <1050000>;
 563                                 regulator-always-on;
 564                                 regulator-boot-on;
 565                         };
 566
 567                         buck2_reg: BUCK2 {
 568                                 regulator-name = "VDD_ARM";
 569                                 regulator-min-microvolt = <850000>;
 570                                 regulator-max-microvolt = <1500000>;
 571                                 regulator-always-on;
 572                                 regulator-boot-on;
 573                         };
 574
 575                         buck3_reg: BUCK3 {
 576                                 regulator-name = "VDD_INT";
 577                                 regulator-min-microvolt = <850000>;
 578                                 regulator-max-microvolt = <1100000>;
 579                                 regulator-always-on;
 580                                 regulator-boot-on;
 581                         };
 582
 583                         buck4_reg: BUCK4 {
 584                                 regulator-name = "VDD_G3D";
 585                                 regulator-min-microvolt = <850000>;
 586                                 regulator-max-microvolt = <1075000>;
 587                                 regulator-boot-on;
 588                         };
 589
 590                         buck5_reg: BUCK5 {
 591                                 regulator-name = "buck5";
 592                                 regulator-always-on;
 593                         };
 594
 595                         buck6_reg: BUCK6 {
 596                                 regulator-name = "buck6";
 597                                 regulator-always-on;
 598                         };
 599
 600                         buck7_reg: BUCK7 {
 601                                 regulator-name = "buck7";
 602                                 regulator-always-on;
 603                         };
 604
 605                         /* not connected */
 606                         buck8_reg: BUCK8 {
 607                                 regulator-name = "buck8";
 608                         };
 609
 610                         buck9_reg: BUCK9 {
 611                                 regulator-name = "3MP_CORE_1.2V";
 612                                 regulator-min-microvolt = <1200000>;
 613                                 regulator-max-microvolt = <1200000>;
 614
 615                                 regulator-state-mem {
 616                                         regulator-off-in-suspend;
 617                                 };
 618                         };
 619                 };
 620         };
 621 };
 622
 623 &mshc_0 {
 624         broken-cd;
 625         non-removable;
 626         card-detect-delay = <200>;
 627         clock-frequency = <400000000>;
 628         samsung,dw-mshc-ciu-div = <0>;
 629         samsung,dw-mshc-sdr-timing = <2 3>;
 630         samsung,dw-mshc-ddr-timing = <1 2>;
 631         pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 632         pinctrl-names = "default";
 633         bus-width = <4>;
 634         cap-mmc-highspeed;
 635         cap-sd-highspeed;
 636         status = "okay";
 637 };
 638
 639 &pinctrl_0 {
 640         pinctrl-names = "default";
 641         pinctrl-0 = <&sleep0>;
 642
 643         tsp_reg_gpio_2: tsp-reg-gpio-2 {
 644                 samsung,pins = "gpb-5";
 645                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 646                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 647         };
 648
 649         tsp_reg_gpio_3: tsp-reg-gpio-3 {
 650                 samsung,pins = "gpb-7";
 651                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 652                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 653         };
 654
 655         sleep0: sleep-states {
 656                 PIN_SLP(gpa0-0, INPUT, NONE);
 657                 PIN_SLP(gpa0-1, OUT0, NONE);
 658                 PIN_SLP(gpa0-2, INPUT, NONE);
 659                 PIN_SLP(gpa0-3, INPUT, UP);
 660                 PIN_SLP(gpa0-4, INPUT, NONE);
 661                 PIN_SLP(gpa0-5, INPUT, DOWN);
 662                 PIN_SLP(gpa0-6, INPUT, DOWN);
 663                 PIN_SLP(gpa0-7, INPUT, UP);
 664
 665                 PIN_SLP(gpa1-0, INPUT, DOWN);
 666                 PIN_SLP(gpa1-1, INPUT, DOWN);
 667                 PIN_SLP(gpa1-2, INPUT, DOWN);
 668                 PIN_SLP(gpa1-3, INPUT, DOWN);
 669                 PIN_SLP(gpa1-4, INPUT, DOWN);
 670                 PIN_SLP(gpa1-5, INPUT, DOWN);
 671
 672                 PIN_SLP(gpb-0, INPUT, NONE);
 673                 PIN_SLP(gpb-1, INPUT, NONE);
 674                 PIN_SLP(gpb-2, INPUT, NONE);
 675                 PIN_SLP(gpb-3, INPUT, NONE);
 676                 PIN_SLP(gpb-4, INPUT, DOWN);
 677                 PIN_SLP(gpb-5, INPUT, DOWN);
 678                 PIN_SLP(gpb-6, INPUT, DOWN);
 679                 PIN_SLP(gpb-7, INPUT, DOWN);
 680
 681                 PIN_SLP(gpc0-0, INPUT, DOWN);
 682                 PIN_SLP(gpc0-1, INPUT, DOWN);
 683                 PIN_SLP(gpc0-2, INPUT, DOWN);
 684                 PIN_SLP(gpc0-3, INPUT, DOWN);
 685                 PIN_SLP(gpc0-4, INPUT, DOWN);
 686
 687                 PIN_SLP(gpc1-0, INPUT, UP);
 688                 PIN_SLP(gpc1-1, PREV, NONE);
 689                 PIN_SLP(gpc1-2, INPUT, UP);
 690                 PIN_SLP(gpc1-3, INPUT, UP);
 691                 PIN_SLP(gpc1-4, INPUT, UP);
 692
 693                 PIN_SLP(gpd0-0, INPUT, DOWN);
 694                 PIN_SLP(gpd0-1, OUT0, NONE);
 695                 PIN_SLP(gpd0-2, INPUT, NONE);
 696                 PIN_SLP(gpd0-3, INPUT, NONE);
 697
 698                 PIN_SLP(gpd1-0, INPUT, DOWN);
 699                 PIN_SLP(gpd1-1, INPUT, DOWN);
 700                 PIN_SLP(gpd1-2, INPUT, NONE);
 701                 PIN_SLP(gpd1-3, INPUT, NONE);
 702
 703                 PIN_SLP(gpf0-0, OUT0, NONE);
 704                 PIN_SLP(gpf0-1, OUT0, NONE);
 705                 PIN_SLP(gpf0-2, OUT0, NONE);
 706                 PIN_SLP(gpf0-3, OUT0, NONE);
 707                 PIN_SLP(gpf0-4, OUT0, NONE);
 708                 PIN_SLP(gpf0-5, OUT0, NONE);
 709                 PIN_SLP(gpf0-6, OUT0, NONE);
 710                 PIN_SLP(gpf0-7, OUT0, NONE);
 711
 712                 PIN_SLP(gpf1-0, OUT0, NONE);
 713                 PIN_SLP(gpf1-1, OUT0, NONE);
 714                 PIN_SLP(gpf1-2, OUT0, NONE);
 715                 PIN_SLP(gpf1-3, OUT0, NONE);
 716                 PIN_SLP(gpf1-4, OUT0, NONE);
 717                 PIN_SLP(gpf1-5, OUT0, NONE);
 718                 PIN_SLP(gpf1-6, OUT0, NONE);
 719                 PIN_SLP(gpf1-7, OUT0, NONE);
 720
 721                 PIN_SLP(gpf2-0, OUT0, NONE);
 722                 PIN_SLP(gpf2-1, OUT0, NONE);
 723                 PIN_SLP(gpf2-2, OUT0, NONE);
 724                 PIN_SLP(gpf2-3, OUT0, NONE);
 725                 PIN_SLP(gpf2-4, OUT0, NONE);
 726                 PIN_SLP(gpf2-5, OUT0, NONE);
 727                 PIN_SLP(gpf2-6, OUT0, NONE);
 728                 PIN_SLP(gpf2-7, OUT0, NONE);
 729
 730                 PIN_SLP(gpf3-0, OUT0, NONE);
 731                 PIN_SLP(gpf3-1, OUT0, NONE);
 732                 PIN_SLP(gpf3-2, OUT0, NONE);
 733                 PIN_SLP(gpf3-3, OUT0, NONE);
 734                 PIN_SLP(gpf3-4, OUT0, NONE);
 735                 PIN_SLP(gpf3-5, OUT0, NONE);
 736
 737                 PIN_SLP(gpj0-0, INPUT, DOWN);
 738                 PIN_SLP(gpj0-1, INPUT, DOWN);
 739                 PIN_SLP(gpj0-2, INPUT, DOWN);
 740                 PIN_SLP(gpj0-3, PREV, NONE);
 741                 PIN_SLP(gpj0-4, PREV, NONE);
 742                 PIN_SLP(gpj0-5, OUT0, NONE);
 743                 PIN_SLP(gpj0-6, OUT0, NONE);
 744                 PIN_SLP(gpj0-7, OUT0, NONE);
 745
 746                 PIN_SLP(gpj1-0, OUT0, NONE);
 747                 PIN_SLP(gpj1-1, INPUT, DOWN);
 748                 PIN_SLP(gpj1-2, PREV, NONE);
 749                 PIN_SLP(gpj1-3, OUT0, NONE);
 750         };
 751 };
 752
 753 &pinctrl_1 {
 754         pinctrl-names = "default";
 755         pinctrl-0 = <&sleep1>;
 756
 757         sd3_wifi: sd3-wifi {
 758                 samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
 759                 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 760                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 761         };
 762
 763         bt_shutdown: bt-shutdown {
 764                 samsung,pins = "gpl0-6";
 765                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 766                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 767         };
 768
 769         uart_sel: uart-sel {
 770                 samsung,pins = "gpl2-7";
 771                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 772                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 773                 samsung,pin-val = <1>;
 774                 /* 0 = CP, 1 = AP (serial output) */
 775         };
 776
 777         tsp_rst: tsp-rst {
 778                 samsung,pins = "gpm0-4";
 779                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 780                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 781         };
 782
 783         tsp_irq: tsp-irq {
 784                 samsung,pins = "gpm2-3";
 785                 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 786                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 787         };
 788
 789         wifi_reset: wifi-reset {
 790                 samsung,pins = "gpm3-5";
 791                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 792                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 793         };
 794
 795         tsp_reg_gpio_1: tsp-reg-gpio-1 {
 796                 samsung,pins = "gpm4-5";
 797                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 798                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 799         };
 800
 801         ak8975_irq: ak8975-irq {
 802                 samsung,pins = "gpm4-7";
 803                 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 804                 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 805         };
 806
 807         stmpe_adc_irq: stmpe-adc-irq {
 808                 samsung,pins = "gpx0-1";
 809                 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 810                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 811         };
 812
 813         max77686_irq: max77686-irq {
 814                 samsung,pins = "gpx0-7";
 815                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 816         };
 817
 818         gpio_keys: gpio-keys {
 819                 samsung,pins = "gpx2-2", "gpx2-7", "gpx3-3";
 820                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 821         };
 822
 823         fuel_alert_irq: fuel-alert-irq {
 824                 samsung,pins = "gpx2-3";
 825                 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 826                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 827         };
 828
 829         wifi_host_wake: wifi-host-wake {
 830                 samsung,pins = "gpx2-5";
 831                 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 832                 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 833         };
 834
 835         bt_host_wakeup: bt-host-wakeup {
 836                 samsung,pins = "gpx2-6";
 837                 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 838                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 839         };
 840
 841         bt_device_wakeup: bt-device-wakeup {
 842                 samsung,pins = "gpx3-1";
 843                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 844                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 845         };
 846
 847         sdhci2_cd: sdhci2-cd {
 848                 samsung,pins = "gpx3-4";
 849                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 850         };
 851
 852         sleep1: sleep-states {
 853                 PIN_SLP(gpk0-0, PREV, NONE);
 854                 PIN_SLP(gpk0-1, PREV, NONE);
 855                 PIN_SLP(gpk0-2, PREV, NONE);
 856                 PIN_SLP(gpk0-3, PREV, NONE);
 857                 PIN_SLP(gpk0-4, PREV, NONE);
 858                 PIN_SLP(gpk0-5, PREV, NONE);
 859                 PIN_SLP(gpk0-6, PREV, NONE);
 860
 861                 PIN_SLP(gpk1-0, INPUT, DOWN);
 862                 PIN_SLP(gpk1-1, INPUT, DOWN);
 863                 PIN_SLP(gpk1-2, INPUT, DOWN);
 864                 PIN_SLP(gpk1-3, PREV, NONE);
 865                 PIN_SLP(gpk1-4, PREV, NONE);
 866                 PIN_SLP(gpk1-5, PREV, NONE);
 867                 PIN_SLP(gpk1-6, PREV, NONE);
 868
 869                 PIN_SLP(gpk2-0, INPUT, DOWN);
 870                 PIN_SLP(gpk2-1, INPUT, DOWN);
 871                 PIN_SLP(gpk2-2, INPUT, DOWN);
 872                 PIN_SLP(gpk2-3, INPUT, DOWN);
 873                 PIN_SLP(gpk2-4, INPUT, DOWN);
 874                 PIN_SLP(gpk2-5, INPUT, DOWN);
 875                 PIN_SLP(gpk2-6, INPUT, DOWN);
 876
 877                 PIN_SLP(gpk3-0, OUT0, NONE);
 878                 PIN_SLP(gpk3-1, INPUT, NONE);
 879                 PIN_SLP(gpk3-2, INPUT, DOWN);
 880                 PIN_SLP(gpk3-3, INPUT, NONE);
 881                 PIN_SLP(gpk3-4, INPUT, NONE);
 882                 PIN_SLP(gpk3-5, INPUT, NONE);
 883                 PIN_SLP(gpk3-6, INPUT, NONE);
 884
 885                 PIN_SLP(gpl0-0, OUT0, NONE);
 886                 PIN_SLP(gpl0-1, INPUT, NONE);
 887                 PIN_SLP(gpl0-2, INPUT, NONE);
 888                 PIN_SLP(gpl0-3, INPUT, DOWN);
 889                 PIN_SLP(gpl0-4, PREV, NONE);
 890                 PIN_SLP(gpl0-6, PREV, NONE);
 891
 892                 PIN_SLP(gpl1-0, OUT0, NONE);
 893                 PIN_SLP(gpl1-1, OUT0, NONE);
 894
 895                 PIN_SLP(gpl2-0, INPUT, DOWN);
 896                 PIN_SLP(gpl2-1, INPUT, DOWN);
 897                 PIN_SLP(gpl2-2, INPUT, DOWN);
 898                 PIN_SLP(gpl2-3, INPUT, DOWN);
 899                 PIN_SLP(gpl2-4, OUT0, NONE);
 900                 PIN_SLP(gpl2-5, INPUT, DOWN);
 901                 PIN_SLP(gpl2-6, PREV, NONE);
 902                 PIN_SLP(gpl2-7, PREV, NONE);
 903
 904                 PIN_SLP(gpm0-0, PREV, NONE);
 905                 PIN_SLP(gpm0-1, OUT0, NONE);
 906                 PIN_SLP(gpm0-2, INPUT, DOWN);
 907                 PIN_SLP(gpm0-3, INPUT, NONE);
 908                 PIN_SLP(gpm0-4, OUT0, NONE);
 909                 PIN_SLP(gpm0-5, OUT0, NONE);
 910                 PIN_SLP(gpm0-6, INPUT, DOWN);
 911                 PIN_SLP(gpm0-7, OUT0, NONE);
 912
 913                 PIN_SLP(gpm1-0, INPUT, NONE);
 914                 PIN_SLP(gpm1-1, INPUT, NONE);
 915                 PIN_SLP(gpm1-2, INPUT, NONE);
 916                 PIN_SLP(gpm1-3, INPUT, NONE);
 917                 PIN_SLP(gpm1-4, INPUT, NONE);
 918                 PIN_SLP(gpm1-5, INPUT, NONE);
 919                 PIN_SLP(gpm1-6, INPUT, DOWN);
 920
 921                 PIN_SLP(gpm2-0, INPUT, NONE);
 922                 PIN_SLP(gpm2-1, INPUT, NONE);
 923                 PIN_SLP(gpm2-2, OUT0, NONE);
 924                 PIN_SLP(gpm2-3, OUT0, DOWN);
 925                 PIN_SLP(gpm2-4, INPUT, DOWN);
 926
 927                 PIN_SLP(gpm3-0, PREV, NONE);
 928                 PIN_SLP(gpm3-1, PREV, NONE);
 929                 PIN_SLP(gpm3-2, PREV, NONE);
 930                 PIN_SLP(gpm3-3, OUT1, NONE);
 931                 PIN_SLP(gpm3-4, OUT0, DOWN);
 932                 PIN_SLP(gpm3-5, PREV, NONE);
 933                 PIN_SLP(gpm3-6, PREV, NONE);
 934                 PIN_SLP(gpm3-7, OUT0, NONE);
 935
 936                 PIN_SLP(gpm4-0, INPUT, NONE);
 937                 PIN_SLP(gpm4-1, INPUT, NONE);
 938                 PIN_SLP(gpm4-2, INPUT, DOWN);
 939                 PIN_SLP(gpm4-3, INPUT, DOWN);
 940                 PIN_SLP(gpm4-4, PREV, NONE);
 941                 PIN_SLP(gpm4-5, OUT0, NONE);
 942                 PIN_SLP(gpm4-6, OUT0, NONE);
 943                 PIN_SLP(gpm4-7, INPUT, DOWN);
 944
 945                 PIN_SLP(gpy0-0, INPUT, DOWN);
 946                 PIN_SLP(gpy0-1, INPUT, DOWN);
 947                 PIN_SLP(gpy0-2, INPUT, NONE);
 948                 PIN_SLP(gpy0-3, INPUT, NONE);
 949                 PIN_SLP(gpy0-4, INPUT, NONE);
 950                 PIN_SLP(gpy0-5, INPUT, NONE);
 951
 952                 PIN_SLP(gpy1-0, INPUT, DOWN);
 953                 PIN_SLP(gpy1-1, INPUT, DOWN);
 954                 PIN_SLP(gpy1-2, INPUT, DOWN);
 955                 PIN_SLP(gpy1-3, INPUT, DOWN);
 956
 957                 PIN_SLP(gpy2-0, PREV, NONE);
 958                 PIN_SLP(gpy2-1, INPUT, DOWN);
 959                 PIN_SLP(gpy2-2, INPUT, NONE);
 960                 PIN_SLP(gpy2-3, INPUT, NONE);
 961                 PIN_SLP(gpy2-4, INPUT, NONE);
 962                 PIN_SLP(gpy2-5, INPUT, NONE);
 963
 964                 PIN_SLP(gpy3-0, INPUT, DOWN);
 965                 PIN_SLP(gpy3-1, INPUT, DOWN);
 966                 PIN_SLP(gpy3-2, INPUT, DOWN);
 967                 PIN_SLP(gpy3-3, INPUT, DOWN);
 968                 PIN_SLP(gpy3-4, INPUT, DOWN);
 969                 PIN_SLP(gpy3-5, INPUT, DOWN);
 970                 PIN_SLP(gpy3-6, INPUT, DOWN);
 971                 PIN_SLP(gpy3-7, INPUT, DOWN);
 972
 973                 PIN_SLP(gpy4-0, INPUT, DOWN);
 974                 PIN_SLP(gpy4-1, INPUT, DOWN);
 975                 PIN_SLP(gpy4-2, INPUT, DOWN);
 976                 PIN_SLP(gpy4-3, INPUT, DOWN);
 977                 PIN_SLP(gpy4-4, INPUT, DOWN);
 978                 PIN_SLP(gpy4-5, INPUT, DOWN);
 979                 PIN_SLP(gpy4-6, INPUT, DOWN);
 980                 PIN_SLP(gpy4-7, INPUT, DOWN);
 981
 982                 PIN_SLP(gpy5-0, INPUT, DOWN);
 983                 PIN_SLP(gpy5-1, INPUT, DOWN);
 984                 PIN_SLP(gpy5-2, INPUT, DOWN);
 985                 PIN_SLP(gpy5-3, INPUT, DOWN);
 986                 PIN_SLP(gpy5-4, INPUT, DOWN);
 987                 PIN_SLP(gpy5-5, INPUT, DOWN);
 988                 PIN_SLP(gpy5-6, INPUT, DOWN);
 989                 PIN_SLP(gpy5-7, INPUT, DOWN);
 990
 991                 PIN_SLP(gpy6-0, INPUT, DOWN);
 992                 PIN_SLP(gpy6-1, INPUT, DOWN);
 993                 PIN_SLP(gpy6-2, INPUT, DOWN);
 994                 PIN_SLP(gpy6-3, INPUT, DOWN);
 995                 PIN_SLP(gpy6-4, INPUT, DOWN);
 996                 PIN_SLP(gpy6-5, INPUT, DOWN);
 997                 PIN_SLP(gpy6-6, INPUT, DOWN);
 998                 PIN_SLP(gpy6-7, INPUT, DOWN);
 999         };
1000 };
1001
1002 &pinctrl_2 {
1003         pinctrl-names = "default";
1004         pinctrl-0 = <&sleep2>;
1005
1006         sleep2: sleep-states {
1007                 PIN_SLP(gpz-0, INPUT, DOWN);
1008                 PIN_SLP(gpz-1, INPUT, DOWN);
1009                 PIN_SLP(gpz-2, INPUT, DOWN);
1010                 PIN_SLP(gpz-3, INPUT, DOWN);
1011                 PIN_SLP(gpz-4, INPUT, DOWN);
1012                 PIN_SLP(gpz-5, INPUT, DOWN);
1013                 PIN_SLP(gpz-6, INPUT, DOWN);
1014         };
1015 };
1016
1017 &pinctrl_3 {
1018         pinctrl-names = "default";
1019         pinctrl-0 = <&sleep3>;
1020
1021         sleep3: sleep-states {
1022                 PIN_SLP(gpv0-0, INPUT, DOWN);
1023                 PIN_SLP(gpv0-1, INPUT, DOWN);
1024                 PIN_SLP(gpv0-2, INPUT, DOWN);
1025                 PIN_SLP(gpv0-3, INPUT, DOWN);
1026                 PIN_SLP(gpv0-4, INPUT, DOWN);
1027                 PIN_SLP(gpv0-5, INPUT, DOWN);
1028                 PIN_SLP(gpv0-6, INPUT, DOWN);
1029                 PIN_SLP(gpv0-7, INPUT, DOWN);
1030
1031                 PIN_SLP(gpv1-0, INPUT, DOWN);
1032                 PIN_SLP(gpv1-1, INPUT, DOWN);
1033                 PIN_SLP(gpv1-2, INPUT, DOWN);
1034                 PIN_SLP(gpv1-3, INPUT, DOWN);
1035                 PIN_SLP(gpv1-4, INPUT, DOWN);
1036                 PIN_SLP(gpv1-5, INPUT, DOWN);
1037                 PIN_SLP(gpv1-6, INPUT, DOWN);
1038                 PIN_SLP(gpv1-7, INPUT, DOWN);
1039
1040                 PIN_SLP(gpv2-0, INPUT, DOWN);
1041                 PIN_SLP(gpv2-1, INPUT, DOWN);
1042                 PIN_SLP(gpv2-2, INPUT, DOWN);
1043                 PIN_SLP(gpv2-3, INPUT, DOWN);
1044                 PIN_SLP(gpv2-4, INPUT, DOWN);
1045                 PIN_SLP(gpv2-5, INPUT, DOWN);
1046                 PIN_SLP(gpv2-6, INPUT, DOWN);
1047                 PIN_SLP(gpv2-7, INPUT, DOWN);
1048
1049                 PIN_SLP(gpv3-0, INPUT, DOWN);
1050                 PIN_SLP(gpv3-1, INPUT, DOWN);
1051                 PIN_SLP(gpv3-2, INPUT, DOWN);
1052                 PIN_SLP(gpv3-3, INPUT, DOWN);
1053                 PIN_SLP(gpv3-4, INPUT, DOWN);
1054                 PIN_SLP(gpv3-5, INPUT, DOWN);
1055                 PIN_SLP(gpv3-6, INPUT, DOWN);
1056                 PIN_SLP(gpv3-7, INPUT, DOWN);
1057
1058                 PIN_SLP(gpv4-0, INPUT, DOWN);
1059                 PIN_SLP(gpv4-1, INPUT, DOWN);
1060         };
1061 };
1062
1063 &pmu_system_controller {
1064         assigned-clocks = <&pmu_system_controller 0>;
1065         assigned-clock-parents = <&clock CLK_XUSBXTI>;
1066 };
1067
1068 &rtc {
1069         clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1070         clock-names = "rtc", "rtc_src";
1071         status = "okay";
1072 };
1073
1074 &sdhci_2 {
1075         bus-width = <4>;
1076         cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
1077         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
1078         pinctrl-names = "default";
1079         vmmc-supply = <&ldo21_reg>;
1080         status = "okay";
1081 };
1082
1083 &sdhci_3 {
1084         #address-cells = <1>;
1085         #size-cells = <0>;
1086         non-removable;
1087         bus-width = <4>;
1088         mmc-pwrseq = <&wlan_pwrseq>;
1089
1090         pinctrl-names = "default";
1091         pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_wifi>;
1092         status = "okay";
1093
1094         wifi@1 {
1095                 compatible = "brcm,bcm4329-fmac";
1096                 reg = <0x1>;
1097                 pinctrl-names = "default";
1098                 pinctrl-0 = <&wifi_host_wake>;
1099                 interrupt-parent = <&gpx2>;
1100                 interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
1101                 interrupt-names = "host-wake";
1102         };
1103 };
1104
1105 &serial_0 {
1106         pinctrl-0 = <&uart0_data &uart0_fctl>;
1107         pinctrl-names = "default";
1108         status = "okay";
1109
1110         bluetooth {
1111                 compatible = "brcm,bcm4330-bt";
1112                 pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
1113                 pinctrl-names = "default";
1114
1115                 max-speed = <2000000>;
1116                 shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>;
1117                 device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
1118                 host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
1119                 clocks = <&max77686 MAX77686_CLK_PMIC>;
1120                 clock-names = "lpo";
1121         };
1122 };
1123
1124 &serial_2 {
1125         pinctrl-0 = <&uart_sel>;
1126         pinctrl-names = "default";
1127         status = "okay";
1128 };
1129
1130 &tmu {
1131         status = "okay";
1132 };