arch/arm/boot/dts/dra71-evm.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
   4  */
   5
   6 #include "dra71x.dtsi"
   7 #include "dra7-mmc-iodelay.dtsi"
   8 #include "dra72x-mmc-iodelay.dtsi"
   9 #include <dt-bindings/net/ti-dp83867.h>
  10
  11 / {
  12         compatible = "ti,dra718-evm", "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7";
  13         model = "TI DRA718 EVM";
  14
  15         memory {
  16                 device_type = "memory";
  17                 reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
  18         };
  19
  20         reserved-memory {
  21                 #address-cells = <2>;
  22                 #size-cells = <2>;
  23                 ranges;
  24
  25                 ipu2_memory_region: ipu2-memory@95800000 {
  26                         compatible = "shared-dma-pool";
  27                         reg = <0x0 0x95800000 0x0 0x3800000>;
  28                         reusable;
  29                         status = "okay";
  30                 };
  31
  32                 dsp1_memory_region: dsp1-memory@99000000 {
  33                         compatible = "shared-dma-pool";
  34                         reg = <0x0 0x99000000 0x0 0x4000000>;
  35                         reusable;
  36                         status = "okay";
  37                 };
  38
  39                 ipu1_memory_region: ipu1-memory@9d000000 {
  40                         compatible = "shared-dma-pool";
  41                         reg = <0x0 0x9d000000 0x0 0x2000000>;
  42                         reusable;
  43                         status = "okay";
  44                 };
  45         };
  46
  47         vpo_sd_1v8_3v3: gpio-regulator-TPS74801 {
  48                 compatible = "regulator-gpio";
  49
  50                 regulator-name = "vddshv8";
  51                 regulator-min-microvolt = <1800000>;
  52                 regulator-max-microvolt = <3300000>;
  53                 regulator-boot-on;
  54                 vin-supply = <&evm_5v0>;
  55
  56                 gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
  57                 states = <1800000 0x0
  58                           3300000 0x1>;
  59         };
  60
  61         evm_1v8_sw: fixedregulator-evm_1v8 {
  62                 compatible = "regulator-fixed";
  63                 regulator-name = "evm_1v8";
  64                 regulator-min-microvolt = <1800000>;
  65                 regulator-max-microvolt = <1800000>;
  66                 vin-supply = <&lp8732_buck0_reg>;
  67                 regulator-always-on;
  68                 regulator-boot-on;
  69         };
  70
  71         poweroff: gpio-poweroff {
  72                 compatible = "gpio-poweroff";
  73                 gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>;
  74                 input;
  75         };
  76 };
  77
  78 &i2c1 {
  79         status = "okay";
  80         clock-frequency = <400000>;
  81
  82         lp8733: lp8733@60 {
  83                 compatible = "ti,lp8733";
  84                 reg = <0x60>;
  85
  86                 buck0-in-supply =<&vsys_3v3>;
  87                 buck1-in-supply =<&vsys_3v3>;
  88                 ldo0-in-supply =<&evm_5v0>;
  89                 ldo1-in-supply =<&evm_5v0>;
  90
  91                 lp8733_regulators: regulators {
  92                         lp8733_buck0_reg: buck0 {
  93                                 /* FB_B0 -> LP8733-BUCK1 - VPO_S1_AVS - VDD_CORE_AVS (core, mpu, gpu) */
  94                                 regulator-name = "lp8733-buck0";
  95                                 regulator-min-microvolt = <850000>;
  96                                 regulator-max-microvolt = <1250000>;
  97                                 regulator-always-on;
  98                                 regulator-boot-on;
  99                         };
 100
 101                         lp8733_buck1_reg: buck1 {
 102                                 /* FB_B1 -> LP8733-BUCK2 - VPO_S2_AVS - VDD_DSP_AVS (DSP/eve/iva) */
 103                                 regulator-name = "lp8733-buck1";
 104                                 regulator-min-microvolt = <850000>;
 105                                 regulator-max-microvolt = <1250000>;
 106                                 regulator-boot-on;
 107                                 regulator-always-on;
 108                         };
 109
 110                         lp8733_ldo0_reg: ldo0 {
 111                                 /* LDO0 -> LP8733-LDO1 - VPO_L1_3V3 - VDDSHV8 (optional) */
 112                                 regulator-name = "lp8733-ldo0";
 113                                 regulator-min-microvolt = <3300000>;
 114                                 regulator-max-microvolt = <3300000>;
 115                                 regulator-boot-on;
 116                                 regulator-always-on;
 117                         };
 118
 119                         lp8733_ldo1_reg: ldo1 {
 120                                 /* LDO1 -> LP8733-LDO2 - VPO_L2_3V3 - VDDA_USB3V3 */
 121                                 regulator-name = "lp8733-ldo1";
 122                                 regulator-min-microvolt = <3300000>;
 123                                 regulator-max-microvolt = <3300000>;
 124                                 regulator-always-on;
 125                                 regulator-boot-on;
 126                         };
 127                 };
 128         };
 129
 130         lp8732: lp8732@61 {
 131                 compatible = "ti,lp8732";
 132                 reg = <0x61>;
 133
 134                 buck0-in-supply =<&vsys_3v3>;
 135                 buck1-in-supply =<&vsys_3v3>;
 136                 ldo0-in-supply =<&vsys_3v3>;
 137                 ldo1-in-supply =<&vsys_3v3>;
 138
 139                 lp8732_regulators: regulators {
 140                         lp8732_buck0_reg: buck0 {
 141                                 /* FB_B0 -> LP8732-BUCK1 - VPO_S3_1V8 - VDDS_1V8 */
 142                                 regulator-name = "lp8732-buck0";
 143                                 regulator-min-microvolt = <1800000>;
 144                                 regulator-max-microvolt = <1800000>;
 145                                 regulator-always-on;
 146                                 regulator-boot-on;
 147                         };
 148
 149                         lp8732_buck1_reg: buck1 {
 150                                 /* FB_B1 -> LP8732-BUCK2 - VPO_S4_DDR - VDD_DDR_1V35 */
 151                                 regulator-name = "lp8732-buck1";
 152                                 regulator-min-microvolt = <1350000>;
 153                                 regulator-max-microvolt = <1350000>;
 154                                 regulator-boot-on;
 155                                 regulator-always-on;
 156                         };
 157
 158                         lp8732_ldo0_reg: ldo0 {
 159                                 /* LDO0 -> LP8732-LDO1 - VPO_L3_1V8 - VDA_1V8_PLL */
 160                                 regulator-name = "lp8732-ldo0";
 161                                 regulator-min-microvolt = <1800000>;
 162                                 regulator-max-microvolt = <1800000>;
 163                                 regulator-boot-on;
 164                                 regulator-always-on;
 165                         };
 166
 167                         lp8732_ldo1_reg: ldo1 {
 168                                 /* LDO1 -> LP8732-LDO2 - VPO_L4_1V8 - VDA_1V8_PHY */
 169                                 regulator-name = "lp8732-ldo1";
 170                                 regulator-min-microvolt = <1800000>;
 171                                 regulator-max-microvolt = <1800000>;
 172                                 regulator-always-on;
 173                                 regulator-boot-on;
 174                         };
 175                 };
 176         };
 177 };
 178
 179 &pcf_lcd {
 180         interrupt-parent = <&gpio7>;
 181         interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
 182 };
 183
 184 &pcf_gpio_21 {
 185         interrupt-parent = <&gpio7>;
 186         interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
 187 };
 188
 189 &pcf_hdmi {
 190         hdmi-i2c-disable-hog {
 191                 /*
 192                  * PM_OEn to High: Disable routing I2C3 to PM_I2C
 193                  * With this PM_SEL(p3) should not matter
 194                  */
 195                 gpio-hog;
 196                 gpios = <0 GPIO_ACTIVE_LOW>;
 197                 output-high;
 198                 line-name = "pm_oe_n";
 199         };
 200 };
 201
 202 &mmc1 {
 203         pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
 204         pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
 205         pinctrl-1 = <&mmc1_pins_hs>;
 206         pinctrl-2 = <&mmc1_pins_sdr12>;
 207         pinctrl-3 = <&mmc1_pins_sdr25>;
 208         pinctrl-4 = <&mmc1_pins_sdr50>;
 209         pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
 210         pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
 211         vqmmc-supply = <&vpo_sd_1v8_3v3>;
 212 };
 213
 214 &mmc2 {
 215         pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
 216         pinctrl-0 = <&mmc2_pins_default>;
 217         pinctrl-1 = <&mmc2_pins_hs>;
 218         pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
 219         pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
 220         vmmc-supply = <&evm_1v8_sw>;
 221         vqmmc-supply = <&evm_1v8_sw>;
 222 };
 223
 224 &mac_sw {
 225         mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
 226                      <&pcf_hdmi 9 GPIO_ACTIVE_LOW>,     /* P11 */
 227                      <&pcf_hdmi 10 GPIO_ACTIVE_LOW>;    /* P12 */
 228         status = "okay";
 229 };
 230
 231 &cpsw_port1 {
 232         phy-handle = <&dp83867_0>;
 233         phy-mode = "rgmii-id";
 234         ti,dual-emac-pvid = <1>;
 235 };
 236
 237 &cpsw_port2 {
 238         phy-handle = <&dp83867_1>;
 239         phy-mode = "rgmii-id";
 240         ti,dual-emac-pvid = <2>;
 241 };
 242
 243 &davinci_mdio_sw {
 244         dp83867_0: ethernet-phy@2 {
 245                 reg = <2>;
 246                 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 247                 ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
 248                 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
 249                 ti,min-output-impedance;
 250                 ti,dp83867-rxctrl-strap-quirk;
 251         };
 252
 253         dp83867_1: ethernet-phy@3 {
 254                 reg = <3>;
 255                 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 256                 ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
 257                 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
 258                 ti,min-output-impedance;
 259                 ti,dp83867-rxctrl-strap-quirk;
 260         };
 261 };
 262
 263 /* No Sata on this device */
 264 &sata_phy {
 265         status = "disabled";
 266 };
 267
 268 &sata {
 269         status = "disabled";
 270 };
 271
 272 /* No RTC on this device */
 273 &rtc {
 274         status = "disabled";
 275 };
 276
 277 &usb2_phy1 {
 278         phy-supply = <&lp8733_ldo1_reg>;
 279 };
 280
 281 &usb2_phy2 {
 282         phy-supply = <&lp8733_ldo1_reg>;
 283 };
 284
 285 &dss {
 286         /* Supplied by VDA_1V8_PLL */
 287         vdda_video-supply = <&lp8732_ldo0_reg>;
 288 };
 289
 290 &hdmi {
 291         /* Supplied by VDA_1V8_PHY */
 292         vdda_video-supply = <&lp8732_ldo1_reg>;
 293 };
 294
 295 &extcon_usb1 {
 296         vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
 297 };
 298
 299 &extcon_usb2 {
 300         vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
 301 };
 302
 303 &ipu2 {
 304         status = "okay";
 305         memory-region = <&ipu2_memory_region>;
 306 };
 307
 308 &ipu1 {
 309         status = "okay";
 310         memory-region = <&ipu1_memory_region>;
 311 };
 312
 313 &dsp1 {
 314         status = "okay";
 315         memory-region = <&dsp1_memory_region>;
 316 };