arch/arm/boot/dts/dra7.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
   4  *
   5  * Based on "omap4.dtsi"
   6  */
   7
   8 #include <dt-bindings/bus/ti-sysc.h>
   9 #include <dt-bindings/clock/dra7.h>
  10 #include <dt-bindings/interrupt-controller/arm-gic.h>
  11 #include <dt-bindings/pinctrl/dra.h>
  12 #include <dt-bindings/clock/dra7.h>
  13
  14 #define MAX_SOURCES 400
  15
  16 / {
  17         #address-cells = <2>;
  18         #size-cells = <2>;
  19
  20         compatible = "ti,dra7xx";
  21         interrupt-parent = <&crossbar_mpu>;
  22         chosen { };
  23
  24         aliases {
  25                 i2c0 = &i2c1;
  26                 i2c1 = &i2c2;
  27                 i2c2 = &i2c3;
  28                 i2c3 = &i2c4;
  29                 i2c4 = &i2c5;
  30                 serial0 = &uart1;
  31                 serial1 = &uart2;
  32                 serial2 = &uart3;
  33                 serial3 = &uart4;
  34                 serial4 = &uart5;
  35                 serial5 = &uart6;
  36                 serial6 = &uart7;
  37                 serial7 = &uart8;
  38                 serial8 = &uart9;
  39                 serial9 = &uart10;
  40                 ethernet0 = &cpsw_port1;
  41                 ethernet1 = &cpsw_port2;
  42                 d_can0 = &dcan1;
  43                 d_can1 = &dcan2;
  44                 spi0 = &qspi;
  45         };
  46
  47         timer {
  48                 compatible = "arm,armv7-timer";
  49                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  50                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  51                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  52                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
  53                 interrupt-parent = <&gic>;
  54         };
  55
  56         gic: interrupt-controller@48211000 {
  57                 compatible = "arm,cortex-a15-gic";
  58                 interrupt-controller;
  59                 #interrupt-cells = <3>;
  60                 reg = <0x0 0x48211000 0x0 0x1000>,
  61                       <0x0 0x48212000 0x0 0x2000>,
  62                       <0x0 0x48214000 0x0 0x2000>,
  63                       <0x0 0x48216000 0x0 0x2000>;
  64                 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
  65                 interrupt-parent = <&gic>;
  66         };
  67
  68         wakeupgen: interrupt-controller@48281000 {
  69                 compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
  70                 interrupt-controller;
  71                 #interrupt-cells = <3>;
  72                 reg = <0x0 0x48281000 0x0 0x1000>;
  73                 interrupt-parent = <&gic>;
  74         };
  75
  76         cpus {
  77                 #address-cells = <1>;
  78                 #size-cells = <0>;
  79
  80                 cpu0: cpu@0 {
  81                         device_type = "cpu";
  82                         compatible = "arm,cortex-a15";
  83                         reg = <0>;
  84
  85                         operating-points-v2 = <&cpu0_opp_table>;
  86
  87                         clocks = <&dpll_mpu_ck>;
  88                         clock-names = "cpu";
  89
  90                         clock-latency = <300000>; /* From omap-cpufreq driver */
  91
  92                         /* cooling options */
  93                         #cooling-cells = <2>; /* min followed by max */
  94
  95                         vbb-supply = <&abb_mpu>;
  96                 };
  97         };
  98
  99         cpu0_opp_table: opp-table {
 100                 compatible = "operating-points-v2-ti-cpu";
 101                 syscon = <&scm_wkup>;
 102
 103                 opp_nom-1000000000 {
 104                         opp-hz = /bits/ 64 <1000000000>;
 105                         opp-microvolt = <1060000 850000 1150000>,
 106                                         <1060000 850000 1150000>;
 107                         opp-supported-hw = <0xFF 0x01>;
 108                         opp-suspend;
 109                 };
 110
 111                 opp_od-1176000000 {
 112                         opp-hz = /bits/ 64 <1176000000>;
 113                         opp-microvolt = <1160000 885000 1160000>,
 114                                         <1160000 885000 1160000>;
 115
 116                         opp-supported-hw = <0xFF 0x02>;
 117                 };
 118
 119                 opp_high@1500000000 {
 120                         opp-hz = /bits/ 64 <1500000000>;
 121                         opp-microvolt = <1210000 950000 1250000>,
 122                                         <1210000 950000 1250000>;
 123                         opp-supported-hw = <0xFF 0x04>;
 124                 };
 125         };
 126
 127         /*
 128          * The soc node represents the soc top level view. It is used for IPs
 129          * that are not memory mapped in the MPU view or for the MPU itself.
 130          */
 131         soc {
 132                 compatible = "ti,omap-infra";
 133                 mpu {
 134                         compatible = "ti,omap5-mpu";
 135                         ti,hwmods = "mpu";
 136                 };
 137         };
 138
 139         /*
 140          * XXX: Use a flat representation of the SOC interconnect.
 141          * The real OMAP interconnect network is quite complex.
 142          * Since it will not bring real advantage to represent that in DT for
 143          * the moment, just use a fake OCP bus entry to represent the whole bus
 144          * hierarchy.
 145          */
 146         ocp: ocp {
 147                 compatible = "ti,dra7-l3-noc", "simple-bus";
 148                 #address-cells = <1>;
 149                 #size-cells = <1>;
 150                 ranges = <0x0 0x0 0x0 0xc0000000>;
 151                 dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
 152                 ti,hwmods = "l3_main_1", "l3_main_2";
 153                 reg = <0x0 0x44000000 0x0 0x1000000>,
 154                       <0x0 0x45000000 0x0 0x1000>;
 155                 interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
 156                                       <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 157
 158                 l4_cfg: interconnect@4a000000 {
 159                 };
 160                 l4_wkup: interconnect@4ae00000 {
 161                 };
 162                 l4_per1: interconnect@48000000 {
 163                 };
 164                 l4_per2: interconnect@48400000 {
 165                 };
 166                 l4_per3: interconnect@48800000 {
 167                 };
 168
 169                 axi@0 {
 170                         compatible = "simple-bus";
 171                         #size-cells = <1>;
 172                         #address-cells = <1>;
 173                         ranges = <0x51000000 0x51000000 0x3000
 174                                   0x0        0x20000000 0x10000000>;
 175                         dma-ranges;
 176                         /**
 177                          * To enable PCI endpoint mode, disable the pcie1_rc
 178                          * node and enable pcie1_ep mode.
 179                          */
 180                         pcie1_rc: pcie@51000000 {
 181                                 reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
 182                                 reg-names = "rc_dbics", "ti_conf", "config";
 183                                 interrupts = <0 232 0x4>, <0 233 0x4>;
 184                                 #address-cells = <3>;
 185                                 #size-cells = <2>;
 186                                 device_type = "pci";
 187                                 ranges = <0x81000000 0 0          0x03000 0 0x00010000
 188                                           0x82000000 0 0x20013000 0x13000 0 0xffed000>;
 189                                 bus-range = <0x00 0xff>;
 190                                 #interrupt-cells = <1>;
 191                                 num-lanes = <1>;
 192                                 linux,pci-domain = <0>;
 193                                 ti,hwmods = "pcie1";
 194                                 phys = <&pcie1_phy>;
 195                                 phy-names = "pcie-phy0";
 196                                 ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
 197                                 interrupt-map-mask = <0 0 0 7>;
 198                                 interrupt-map = <0 0 0 1 &pcie1_intc 1>,
 199                                                 <0 0 0 2 &pcie1_intc 2>,
 200                                                 <0 0 0 3 &pcie1_intc 3>,
 201                                                 <0 0 0 4 &pcie1_intc 4>;
 202                                 ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
 203                                 status = "disabled";
 204                                 pcie1_intc: interrupt-controller {
 205                                         interrupt-controller;
 206                                         #address-cells = <0>;
 207                                         #interrupt-cells = <1>;
 208                                 };
 209                         };
 210
 211                         pcie1_ep: pcie_ep@51000000 {
 212                                 reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>;
 213                                 reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space";
 214                                 interrupts = <0 232 0x4>;
 215                                 num-lanes = <1>;
 216                                 num-ib-windows = <4>;
 217                                 num-ob-windows = <16>;
 218                                 ti,hwmods = "pcie1";
 219                                 phys = <&pcie1_phy>;
 220                                 phy-names = "pcie-phy0";
 221                                 ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
 222                                 ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
 223                                 status = "disabled";
 224                         };
 225                 };
 226
 227                 axi@1 {
 228                         compatible = "simple-bus";
 229                         #size-cells = <1>;
 230                         #address-cells = <1>;
 231                         ranges = <0x51800000 0x51800000 0x3000
 232                                   0x0        0x30000000 0x10000000>;
 233                         dma-ranges;
 234                         status = "disabled";
 235                         pcie2_rc: pcie@51800000 {
 236                                 reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
 237                                 reg-names = "rc_dbics", "ti_conf", "config";
 238                                 interrupts = <0 355 0x4>, <0 356 0x4>;
 239                                 #address-cells = <3>;
 240                                 #size-cells = <2>;
 241                                 device_type = "pci";
 242                                 ranges = <0x81000000 0 0          0x03000 0 0x00010000
 243                                           0x82000000 0 0x30013000 0x13000 0 0xffed000>;
 244                                 bus-range = <0x00 0xff>;
 245                                 #interrupt-cells = <1>;
 246                                 num-lanes = <1>;
 247                                 linux,pci-domain = <1>;
 248                                 ti,hwmods = "pcie2";
 249                                 phys = <&pcie2_phy>;
 250                                 phy-names = "pcie-phy0";
 251                                 interrupt-map-mask = <0 0 0 7>;
 252                                 interrupt-map = <0 0 0 1 &pcie2_intc 1>,
 253                                                 <0 0 0 2 &pcie2_intc 2>,
 254                                                 <0 0 0 3 &pcie2_intc 3>,
 255                                                 <0 0 0 4 &pcie2_intc 4>;
 256                                 ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
 257                                 pcie2_intc: interrupt-controller {
 258                                         interrupt-controller;
 259                                         #address-cells = <0>;
 260                                         #interrupt-cells = <1>;
 261                                 };
 262                         };
 263                 };
 264
 265                 ocmcram1: ocmcram@40300000 {
 266                         compatible = "mmio-sram";
 267                         reg = <0x40300000 0x80000>;
 268                         ranges = <0x0 0x40300000 0x80000>;
 269                         #address-cells = <1>;
 270                         #size-cells = <1>;
 271                         /*
 272                          * This is a placeholder for an optional reserved
 273                          * region for use by secure software. The size
 274                          * of this region is not known until runtime so it
 275                          * is set as zero to either be updated to reserve
 276                          * space or left unchanged to leave all SRAM for use.
 277                          * On HS parts that that require the reserved region
 278                          * either the bootloader can update the size to
 279                          * the required amount or the node can be overridden
 280                          * from the board dts file for the secure platform.
 281                          */
 282                         sram-hs@0 {
 283                                 compatible = "ti,secure-ram";
 284                                 reg = <0x0 0x0>;
 285                         };
 286                 };
 287
 288                 /*
 289                  * NOTE: ocmcram2 and ocmcram3 are not available on all
 290                  * DRA7xx and AM57xx variants. Confirm availability in
 291                  * the data manual for the exact part number in use
 292                  * before enabling these nodes in the board dts file.
 293                  */
 294                 ocmcram2: ocmcram@40400000 {
 295                         status = "disabled";
 296                         compatible = "mmio-sram";
 297                         reg = <0x40400000 0x100000>;
 298                         ranges = <0x0 0x40400000 0x100000>;
 299                         #address-cells = <1>;
 300                         #size-cells = <1>;
 301                 };
 302
 303                 ocmcram3: ocmcram@40500000 {
 304                         status = "disabled";
 305                         compatible = "mmio-sram";
 306                         reg = <0x40500000 0x100000>;
 307                         ranges = <0x0 0x40500000 0x100000>;
 308                         #address-cells = <1>;
 309                         #size-cells = <1>;
 310                 };
 311
 312                 bandgap: bandgap@4a0021e0 {
 313                         reg = <0x4a0021e0 0xc
 314                                 0x4a00232c 0xc
 315                                 0x4a002380 0x2c
 316                                 0x4a0023C0 0x3c
 317                                 0x4a002564 0x8
 318                                 0x4a002574 0x50>;
 319                                 compatible = "ti,dra752-bandgap";
 320                                 interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 321                                 #thermal-sensor-cells = <1>;
 322                 };
 323
 324                 dsp1_system: dsp_system@40d00000 {
 325                         compatible = "syscon";
 326                         reg = <0x40d00000 0x100>;
 327                 };
 328
 329                 dra7_iodelay_core: padconf@4844a000 {
 330                         compatible = "ti,dra7-iodelay";
 331                         reg = <0x4844a000 0x0d1c>;
 332                         #address-cells = <1>;
 333                         #size-cells = <0>;
 334                         #pinctrl-cells = <2>;
 335                 };
 336
 337                 target-module@43300000 {
 338                         compatible = "ti,sysc-omap4", "ti,sysc";
 339                         reg = <0x43300000 0x4>;
 340                         reg-names = "rev";
 341                         clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPCC_CLKCTRL 0>;
 342                         clock-names = "fck";
 343                         #address-cells = <1>;
 344                         #size-cells = <1>;
 345                         ranges = <0x0 0x43300000 0x100000>;
 346
 347                         edma: dma@0 {
 348                                 compatible = "ti,edma3-tpcc";
 349                                 reg = <0 0x100000>;
 350                                 reg-names = "edma3_cc";
 351                                 interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
 352                                              <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
 353                                              <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
 354                                 interrupt-names = "edma3_ccint", "edma3_mperr",
 355                                                   "edma3_ccerrint";
 356                                 dma-requests = <64>;
 357                                 #dma-cells = <2>;
 358
 359                                 ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
 360
 361                                 /*
 362                                 * memcpy is disabled, can be enabled with:
 363                                 * ti,edma-memcpy-channels = <20 21>;
 364                                 * for example. Note that these channels need to be
 365                                 * masked in the xbar as well.
 366                                 */
 367                         };
 368                 };
 369
 370                 target-module@43400000 {
 371                         compatible = "ti,sysc-omap4", "ti,sysc";
 372                         reg = <0x43400000 0x4>;
 373                         reg-names = "rev";
 374                         clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC0_CLKCTRL 0>;
 375                         clock-names = "fck";
 376                         #address-cells = <1>;
 377                         #size-cells = <1>;
 378                         ranges = <0x0 0x43400000 0x100000>;
 379
 380                         edma_tptc0: dma@0 {
 381                                 compatible = "ti,edma3-tptc";
 382                                 reg = <0 0x100000>;
 383                                 interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
 384                                 interrupt-names = "edma3_tcerrint";
 385                         };
 386                 };
 387
 388                 target-module@43500000 {
 389                         compatible = "ti,sysc-omap4", "ti,sysc";
 390                         reg = <0x43500000 0x4>;
 391                         reg-names = "rev";
 392                         clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC1_CLKCTRL 0>;
 393                         clock-names = "fck";
 394                         #address-cells = <1>;
 395                         #size-cells = <1>;
 396                         ranges = <0x0 0x43500000 0x100000>;
 397
 398                         edma_tptc1: dma@0 {
 399                                 compatible = "ti,edma3-tptc";
 400                                 reg = <0 0x100000>;
 401                                 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 402                                 interrupt-names = "edma3_tcerrint";
 403                         };
 404                 };
 405
 406                 dmm@4e000000 {
 407                         compatible = "ti,omap5-dmm";
 408                         reg = <0x4e000000 0x800>;
 409                         interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 410                         ti,hwmods = "dmm";
 411                 };
 412
 413                 ipu1: ipu@58820000 {
 414                         compatible = "ti,dra7-ipu";
 415                         reg = <0x58820000 0x10000>;
 416                         reg-names = "l2ram";
 417                         iommus = <&mmu_ipu1>;
 418                         status = "disabled";
 419                         resets = <&prm_ipu 0>, <&prm_ipu 1>;
 420                         clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>;
 421                         firmware-name = "dra7-ipu1-fw.xem4";
 422                 };
 423
 424                 ipu2: ipu@55020000 {
 425                         compatible = "ti,dra7-ipu";
 426                         reg = <0x55020000 0x10000>;
 427                         reg-names = "l2ram";
 428                         iommus = <&mmu_ipu2>;
 429                         status = "disabled";
 430                         resets = <&prm_core 0>, <&prm_core 1>;
 431                         clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>;
 432                         firmware-name = "dra7-ipu2-fw.xem4";
 433                 };
 434
 435                 dsp1: dsp@40800000 {
 436                         compatible = "ti,dra7-dsp";
 437                         reg = <0x40800000 0x48000>,
 438                               <0x40e00000 0x8000>,
 439                               <0x40f00000 0x8000>;
 440                         reg-names = "l2ram", "l1pram", "l1dram";
 441                         ti,bootreg = <&scm_conf 0x55c 10>;
 442                         iommus = <&mmu0_dsp1>, <&mmu1_dsp1>;
 443                         status = "disabled";
 444                         resets = <&prm_dsp1 0>;
 445                         clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
 446                         firmware-name = "dra7-dsp1-fw.xe66";
 447                 };
 448
 449                 target-module@40d01000 {
 450                         compatible = "ti,sysc-omap2", "ti,sysc";
 451                         reg = <0x40d01000 0x4>,
 452                               <0x40d01010 0x4>,
 453                               <0x40d01014 0x4>;
 454                         reg-names = "rev", "sysc", "syss";
 455                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 456                                         <SYSC_IDLE_NO>,
 457                                         <SYSC_IDLE_SMART>;
 458                         ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
 459                                          SYSC_OMAP2_SOFTRESET |
 460                                          SYSC_OMAP2_AUTOIDLE)>;
 461                         clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
 462                         clock-names = "fck";
 463                         resets = <&prm_dsp1 1>;
 464                         reset-names = "rstctrl";
 465                         ranges = <0x0 0x40d01000 0x1000>;
 466                         #size-cells = <1>;
 467                         #address-cells = <1>;
 468
 469                         mmu0_dsp1: mmu@0 {
 470                                 compatible = "ti,dra7-dsp-iommu";
 471                                 reg = <0x0 0x100>;
 472                                 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 473                                 #iommu-cells = <0>;
 474                                 ti,syscon-mmuconfig = <&dsp1_system 0x0>;
 475                         };
 476                 };
 477
 478                 target-module@40d02000 {
 479                         compatible = "ti,sysc-omap2", "ti,sysc";
 480                         reg = <0x40d02000 0x4>,
 481                               <0x40d02010 0x4>,
 482                               <0x40d02014 0x4>;
 483                         reg-names = "rev", "sysc", "syss";
 484                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 485                                         <SYSC_IDLE_NO>,
 486                                         <SYSC_IDLE_SMART>;
 487                         ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
 488                                          SYSC_OMAP2_SOFTRESET |
 489                                          SYSC_OMAP2_AUTOIDLE)>;
 490                         clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
 491                         clock-names = "fck";
 492                         resets = <&prm_dsp1 1>;
 493                         reset-names = "rstctrl";
 494                         ranges = <0x0 0x40d02000 0x1000>;
 495                         #size-cells = <1>;
 496                         #address-cells = <1>;
 497
 498                         mmu1_dsp1: mmu@0 {
 499                                 compatible = "ti,dra7-dsp-iommu";
 500                                 reg = <0x0 0x100>;
 501                                 interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 502                                 #iommu-cells = <0>;
 503                                 ti,syscon-mmuconfig = <&dsp1_system 0x1>;
 504                         };
 505                 };
 506
 507                 target-module@58882000 {
 508                         compatible = "ti,sysc-omap2", "ti,sysc";
 509                         reg = <0x58882000 0x4>,
 510                               <0x58882010 0x4>,
 511                               <0x58882014 0x4>;
 512                         reg-names = "rev", "sysc", "syss";
 513                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 514                                         <SYSC_IDLE_NO>,
 515                                         <SYSC_IDLE_SMART>;
 516                         ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
 517                                          SYSC_OMAP2_SOFTRESET |
 518                                          SYSC_OMAP2_AUTOIDLE)>;
 519                         clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>;
 520                         clock-names = "fck";
 521                         resets = <&prm_ipu 2>;
 522                         reset-names = "rstctrl";
 523                         #address-cells = <1>;
 524                         #size-cells = <1>;
 525                         ranges = <0x0 0x58882000 0x100>;
 526
 527                         mmu_ipu1: mmu@0 {
 528                                 compatible = "ti,dra7-iommu";
 529                                 reg = <0x0 0x100>;
 530                                 interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
 531                                 #iommu-cells = <0>;
 532                                 ti,iommu-bus-err-back;
 533                         };
 534                 };
 535
 536                 target-module@55082000 {
 537                         compatible = "ti,sysc-omap2", "ti,sysc";
 538                         reg = <0x55082000 0x4>,
 539                               <0x55082010 0x4>,
 540                               <0x55082014 0x4>;
 541                         reg-names = "rev", "sysc", "syss";
 542                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 543                                         <SYSC_IDLE_NO>,
 544                                         <SYSC_IDLE_SMART>;
 545                         ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
 546                                          SYSC_OMAP2_SOFTRESET |
 547                                          SYSC_OMAP2_AUTOIDLE)>;
 548                         clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>;
 549                         clock-names = "fck";
 550                         resets = <&prm_core 2>;
 551                         reset-names = "rstctrl";
 552                         #address-cells = <1>;
 553                         #size-cells = <1>;
 554                         ranges = <0x0 0x55082000 0x100>;
 555
 556                         mmu_ipu2: mmu@0 {
 557                                 compatible = "ti,dra7-iommu";
 558                                 reg = <0x0 0x100>;
 559                                 interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
 560                                 #iommu-cells = <0>;
 561                                 ti,iommu-bus-err-back;
 562                         };
 563                 };
 564
 565                 abb_mpu: regulator-abb-mpu {
 566                         compatible = "ti,abb-v3";
 567                         regulator-name = "abb_mpu";
 568                         #address-cells = <0>;
 569                         #size-cells = <0>;
 570                         clocks = <&sys_clkin1>;
 571                         ti,settling-time = <50>;
 572                         ti,clock-cycles = <16>;
 573
 574                         reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
 575                               <0x4ae06014 0x4>, <0x4a003b20 0xc>,
 576                               <0x4ae0c158 0x4>;
 577                         reg-names = "setup-address", "control-address",
 578                                     "int-address", "efuse-address",
 579                                     "ldo-address";
 580                         ti,tranxdone-status-mask = <0x80>;
 581                         /* LDOVBBMPU_FBB_MUX_CTRL */
 582                         ti,ldovbb-override-mask = <0x400>;
 583                         /* LDOVBBMPU_FBB_VSET_OUT */
 584                         ti,ldovbb-vset-mask = <0x1F>;
 585
 586                         /*
 587                          * NOTE: only FBB mode used but actual vset will
 588                          * determine final biasing
 589                          */
 590                         ti,abb_info = <
 591                         /*uV            ABB     efuse   rbb_m fbb_m     vset_m*/
 592                         1060000         0       0x0     0 0x02000000 0x01F00000
 593                         1160000         0       0x4     0 0x02000000 0x01F00000
 594                         1210000         0       0x8     0 0x02000000 0x01F00000
 595                         >;
 596                 };
 597
 598                 abb_ivahd: regulator-abb-ivahd {
 599                         compatible = "ti,abb-v3";
 600                         regulator-name = "abb_ivahd";
 601                         #address-cells = <0>;
 602                         #size-cells = <0>;
 603                         clocks = <&sys_clkin1>;
 604                         ti,settling-time = <50>;
 605                         ti,clock-cycles = <16>;
 606
 607                         reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
 608                               <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
 609                               <0x4a002470 0x4>;
 610                         reg-names = "setup-address", "control-address",
 611                                     "int-address", "efuse-address",
 612                                     "ldo-address";
 613                         ti,tranxdone-status-mask = <0x40000000>;
 614                         /* LDOVBBIVA_FBB_MUX_CTRL */
 615                         ti,ldovbb-override-mask = <0x400>;
 616                         /* LDOVBBIVA_FBB_VSET_OUT */
 617                         ti,ldovbb-vset-mask = <0x1F>;
 618
 619                         /*
 620                          * NOTE: only FBB mode used but actual vset will
 621                          * determine final biasing
 622                          */
 623                         ti,abb_info = <
 624                         /*uV            ABB     efuse   rbb_m fbb_m     vset_m*/
 625                         1055000         0       0x0     0 0x02000000 0x01F00000
 626                         1150000         0       0x4     0 0x02000000 0x01F00000
 627                         1250000         0       0x8     0 0x02000000 0x01F00000
 628                         >;
 629                 };
 630
 631                 abb_dspeve: regulator-abb-dspeve {
 632                         compatible = "ti,abb-v3";
 633                         regulator-name = "abb_dspeve";
 634                         #address-cells = <0>;
 635                         #size-cells = <0>;
 636                         clocks = <&sys_clkin1>;
 637                         ti,settling-time = <50>;
 638                         ti,clock-cycles = <16>;
 639
 640                         reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
 641                               <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
 642                               <0x4a00246c 0x4>;
 643                         reg-names = "setup-address", "control-address",
 644                                     "int-address", "efuse-address",
 645                                     "ldo-address";
 646                         ti,tranxdone-status-mask = <0x20000000>;
 647                         /* LDOVBBDSPEVE_FBB_MUX_CTRL */
 648                         ti,ldovbb-override-mask = <0x400>;
 649                         /* LDOVBBDSPEVE_FBB_VSET_OUT */
 650                         ti,ldovbb-vset-mask = <0x1F>;
 651
 652                         /*
 653                          * NOTE: only FBB mode used but actual vset will
 654                          * determine final biasing
 655                          */
 656                         ti,abb_info = <
 657                         /*uV            ABB     efuse   rbb_m fbb_m     vset_m*/
 658                         1055000         0       0x0     0 0x02000000 0x01F00000
 659                         1150000         0       0x4     0 0x02000000 0x01F00000
 660                         1250000         0       0x8     0 0x02000000 0x01F00000
 661                         >;
 662                 };
 663
 664                 abb_gpu: regulator-abb-gpu {
 665                         compatible = "ti,abb-v3";
 666                         regulator-name = "abb_gpu";
 667                         #address-cells = <0>;
 668                         #size-cells = <0>;
 669                         clocks = <&sys_clkin1>;
 670                         ti,settling-time = <50>;
 671                         ti,clock-cycles = <16>;
 672
 673                         reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
 674                               <0x4ae06010 0x4>, <0x4a003b08 0xc>,
 675                               <0x4ae0c154 0x4>;
 676                         reg-names = "setup-address", "control-address",
 677                                     "int-address", "efuse-address",
 678                                     "ldo-address";
 679                         ti,tranxdone-status-mask = <0x10000000>;
 680                         /* LDOVBBGPU_FBB_MUX_CTRL */
 681                         ti,ldovbb-override-mask = <0x400>;
 682                         /* LDOVBBGPU_FBB_VSET_OUT */
 683                         ti,ldovbb-vset-mask = <0x1F>;
 684
 685                         /*
 686                          * NOTE: only FBB mode used but actual vset will
 687                          * determine final biasing
 688                          */
 689                         ti,abb_info = <
 690                         /*uV            ABB     efuse   rbb_m fbb_m     vset_m*/
 691                         1090000         0       0x0     0 0x02000000 0x01F00000
 692                         1210000         0       0x4     0 0x02000000 0x01F00000
 693                         1280000         0       0x8     0 0x02000000 0x01F00000
 694                         >;
 695                 };
 696
 697                 qspi: spi@4b300000 {
 698                         compatible = "ti,dra7xxx-qspi";
 699                         reg = <0x4b300000 0x100>,
 700                               <0x5c000000 0x4000000>;
 701                         reg-names = "qspi_base", "qspi_mmap";
 702                         syscon-chipselects = <&scm_conf 0x558>;
 703                         #address-cells = <1>;
 704                         #size-cells = <0>;
 705                         ti,hwmods = "qspi";
 706                         clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>;
 707                         clock-names = "fck";
 708                         num-cs = <4>;
 709                         interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
 710                         status = "disabled";
 711                 };
 712
 713                 /* OCP2SCP3 */
 714                 sata: sata@4a141100 {
 715                         compatible = "snps,dwc-ahci";
 716                         reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
 717                         interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 718                         phys = <&sata_phy>;
 719                         phy-names = "sata-phy";
 720                         clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
 721                         ti,hwmods = "sata";
 722                         ports-implemented = <0x1>;
 723                 };
 724
 725                 /* OCP2SCP1 */
 726                 /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
 727
 728                 target-module@50000000 {
 729                         compatible = "ti,sysc-omap2", "ti,sysc";
 730                         reg = <0x50000000 4>,
 731                               <0x50000010 4>,
 732                               <0x50000014 4>;
 733                         reg-names = "rev", "sysc", "syss";
 734                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 735                                         <SYSC_IDLE_NO>,
 736                                         <SYSC_IDLE_SMART>;
 737                         ti,syss-mask = <1>;
 738                         clocks = <&l3main1_clkctrl DRA7_L3MAIN1_GPMC_CLKCTRL 0>;
 739                         clock-names = "fck";
 740                         #address-cells = <1>;
 741                         #size-cells = <1>;
 742                         ranges = <0x50000000 0x50000000 0x00001000>, /* regs */
 743                                  <0x00000000 0x00000000 0x40000000>; /* data */
 744
 745                         gpmc: gpmc@50000000 {
 746                                 compatible = "ti,am3352-gpmc";
 747                                 reg = <0x50000000 0x37c>;      /* device IO registers */
 748                                 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 749                                 dmas = <&edma_xbar 4 0>;
 750                                 dma-names = "rxtx";
 751                                 gpmc,num-cs = <8>;
 752                                 gpmc,num-waitpins = <2>;
 753                                 #address-cells = <2>;
 754                                 #size-cells = <1>;
 755                                 interrupt-controller;
 756                                 #interrupt-cells = <2>;
 757                                 gpio-controller;
 758                                 #gpio-cells = <2>;
 759                                 status = "disabled";
 760                         };
 761                 };
 762
 763                 target-module@56000000 {
 764                         compatible = "ti,sysc-omap4", "ti,sysc";
 765                         reg = <0x5600fe00 0x4>,
 766                               <0x5600fe10 0x4>;
 767                         reg-names = "rev", "sysc";
 768                         ti,sysc-midle = <SYSC_IDLE_FORCE>,
 769                                         <SYSC_IDLE_NO>,
 770                                         <SYSC_IDLE_SMART>;
 771                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 772                                         <SYSC_IDLE_NO>,
 773                                         <SYSC_IDLE_SMART>;
 774                         clocks = <&gpu_clkctrl DRA7_GPU_CLKCTRL 0>;
 775                         clock-names = "fck";
 776                         #address-cells = <1>;
 777                         #size-cells = <1>;
 778                         ranges = <0 0x56000000 0x2000000>;
 779                 };
 780
 781                 crossbar_mpu: crossbar@4a002a48 {
 782                         compatible = "ti,irq-crossbar";
 783                         reg = <0x4a002a48 0x130>;
 784                         interrupt-controller;
 785                         interrupt-parent = <&wakeupgen>;
 786                         #interrupt-cells = <3>;
 787                         ti,max-irqs = <160>;
 788                         ti,max-crossbar-sources = <MAX_SOURCES>;
 789                         ti,reg-size = <2>;
 790                         ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
 791                         ti,irqs-skip = <10 133 139 140>;
 792                         ti,irqs-safe-map = <0>;
 793                 };
 794
 795                 target-module@58000000 {
 796                         compatible = "ti,sysc-omap2", "ti,sysc";
 797                         reg = <0x58000000 4>,
 798                               <0x58000014 4>;
 799                         reg-names = "rev", "syss";
 800                         ti,syss-mask = <1>;
 801                         clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 0>,
 802                                  <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
 803                                  <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 10>,
 804                                  <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 11>;
 805                         clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
 806                         #address-cells = <1>;
 807                         #size-cells = <1>;
 808                         ranges = <0 0x58000000 0x800000>;
 809
 810                         dss: dss@0 {
 811                                 compatible = "ti,dra7-dss";
 812                                 /* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
 813                                 /* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
 814                                 status = "disabled";
 815                                 /* CTRL_CORE_DSS_PLL_CONTROL */
 816                                 syscon-pll-ctrl = <&scm_conf 0x538>;
 817                                 #address-cells = <1>;
 818                                 #size-cells = <1>;
 819                                 ranges = <0 0 0x800000>;
 820
 821                                 target-module@1000 {
 822                                         compatible = "ti,sysc-omap2", "ti,sysc";
 823                                         reg = <0x1000 0x4>,
 824                                               <0x1010 0x4>,
 825                                               <0x1014 0x4>;
 826                                         reg-names = "rev", "sysc", "syss";
 827                                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 828                                                         <SYSC_IDLE_NO>,
 829                                                         <SYSC_IDLE_SMART>;
 830                                         ti,sysc-midle = <SYSC_IDLE_FORCE>,
 831                                                         <SYSC_IDLE_NO>,
 832                                                         <SYSC_IDLE_SMART>;
 833                                         ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
 834                                                          SYSC_OMAP2_ENAWAKEUP |
 835                                                          SYSC_OMAP2_SOFTRESET |
 836                                                          SYSC_OMAP2_AUTOIDLE)>;
 837                                         ti,syss-mask = <1>;
 838                                         clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
 839                                         clock-names = "fck";
 840                                         #address-cells = <1>;
 841                                         #size-cells = <1>;
 842                                         ranges = <0 0x1000 0x1000>;
 843
 844                                         dispc@0 {
 845                                                 compatible = "ti,dra7-dispc";
 846                                                 reg = <0 0x1000>;
 847                                                 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 848                                                 clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
 849                                                 clock-names = "fck";
 850                                                 /* CTRL_CORE_SMA_SW_1 */
 851                                                 syscon-pol = <&scm_conf 0x534>;
 852                                         };
 853                                 };
 854
 855                                 target-module@40000 {
 856                                         compatible = "ti,sysc-omap4", "ti,sysc";
 857                                         reg = <0x40000 0x4>,
 858                                               <0x40010 0x4>;
 859                                         reg-names = "rev", "sysc";
 860                                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 861                                                         <SYSC_IDLE_NO>,
 862                                                         <SYSC_IDLE_SMART>,
 863                                                         <SYSC_IDLE_SMART_WKUP>;
 864                                         ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
 865                                         clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
 866                                                  <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
 867                                         clock-names = "fck", "dss_clk";
 868                                         #address-cells = <1>;
 869                                         #size-cells = <1>;
 870                                         ranges = <0 0x40000 0x40000>;
 871
 872                                         hdmi: encoder@0 {
 873                                                 compatible = "ti,dra7-hdmi";
 874                                                 reg = <0 0x200>,
 875                                                       <0x200 0x80>,
 876                                                       <0x300 0x80>,
 877                                                       <0x20000 0x19000>;
 878                                                 reg-names = "wp", "pll", "phy", "core";
 879                                                 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 880                                                 status = "disabled";
 881                                                 clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
 882                                                          <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>;
 883                                                 clock-names = "fck", "sys_clk";
 884                                                 dmas = <&sdma_xbar 76>;
 885                                                 dma-names = "audio_tx";
 886                                         };
 887                                 };
 888                         };
 889                 };
 890
 891                 aes1_target: target-module@4b500000 {
 892                         compatible = "ti,sysc-omap2", "ti,sysc";
 893                         reg = <0x4b500080 0x4>,
 894                               <0x4b500084 0x4>,
 895                               <0x4b500088 0x4>;
 896                         reg-names = "rev", "sysc", "syss";
 897                         ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
 898                                          SYSC_OMAP2_AUTOIDLE)>;
 899                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 900                                         <SYSC_IDLE_NO>,
 901                                         <SYSC_IDLE_SMART>,
 902                                         <SYSC_IDLE_SMART_WKUP>;
 903                         ti,syss-mask = <1>;
 904                         /* Domains (P, C): per_pwrdm, l4sec_clkdm */
 905                         clocks = <&l4sec_clkctrl DRA7_L4SEC_AES1_CLKCTRL 0>;
 906                         clock-names = "fck";
 907                         #address-cells = <1>;
 908                         #size-cells = <1>;
 909                         ranges = <0x0 0x4b500000 0x1000>;
 910
 911                         aes1: aes@0 {
 912                                 compatible = "ti,omap4-aes";
 913                                 reg = <0 0xa0>;
 914                                 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 915                                 dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
 916                                 dma-names = "tx", "rx";
 917                                 clocks = <&l3_iclk_div>;
 918                                 clock-names = "fck";
 919                         };
 920                 };
 921
 922                 aes2_target: target-module@4b700000 {
 923                         compatible = "ti,sysc-omap2", "ti,sysc";
 924                         reg = <0x4b700080 0x4>,
 925                               <0x4b700084 0x4>,
 926                               <0x4b700088 0x4>;
 927                         reg-names = "rev", "sysc", "syss";
 928                         ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
 929                                          SYSC_OMAP2_AUTOIDLE)>;
 930                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 931                                         <SYSC_IDLE_NO>,
 932                                         <SYSC_IDLE_SMART>,
 933                                         <SYSC_IDLE_SMART_WKUP>;
 934                         ti,syss-mask = <1>;
 935                         /* Domains (P, C): per_pwrdm, l4sec_clkdm */
 936                         clocks = <&l4sec_clkctrl DRA7_L4SEC_AES2_CLKCTRL 0>;
 937                         clock-names = "fck";
 938                         #address-cells = <1>;
 939                         #size-cells = <1>;
 940                         ranges = <0x0 0x4b700000 0x1000>;
 941
 942                         aes2: aes@0 {
 943                                 compatible = "ti,omap4-aes";
 944                                 reg = <0 0xa0>;
 945                                 interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 946                                 dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
 947                                 dma-names = "tx", "rx";
 948                                 clocks = <&l3_iclk_div>;
 949                                 clock-names = "fck";
 950                         };
 951                 };
 952
 953                 sham1_target: target-module@4b101000 {
 954                         compatible = "ti,sysc-omap3-sham", "ti,sysc";
 955                         reg = <0x4b101100 0x4>,
 956                               <0x4b101110 0x4>,
 957                               <0x4b101114 0x4>;
 958                         reg-names = "rev", "sysc", "syss";
 959                         ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
 960                                          SYSC_OMAP2_AUTOIDLE)>;
 961                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 962                                         <SYSC_IDLE_NO>,
 963                                         <SYSC_IDLE_SMART>;
 964                         ti,syss-mask = <1>;
 965                         /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
 966                         clocks = <&l4sec_clkctrl DRA7_L4SEC_SHAM_CLKCTRL 0>;
 967                         clock-names = "fck";
 968                         #address-cells = <1>;
 969                         #size-cells = <1>;
 970                         ranges = <0x0 0x4b101000 0x1000>;
 971
 972                         sham1: sham@0 {
 973                                 compatible = "ti,omap5-sham";
 974                                 reg = <0 0x300>;
 975                                 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 976                                 dmas = <&edma_xbar 119 0>;
 977                                 dma-names = "rx";
 978                                 clocks = <&l3_iclk_div>;
 979                                 clock-names = "fck";
 980                         };
 981                 };
 982
 983                 sham2_target: target-module@42701000 {
 984                         compatible = "ti,sysc-omap3-sham", "ti,sysc";
 985                         reg = <0x42701100 0x4>,
 986                               <0x42701110 0x4>,
 987                               <0x42701114 0x4>;
 988                         reg-names = "rev", "sysc", "syss";
 989                         ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
 990                                          SYSC_OMAP2_AUTOIDLE)>;
 991                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 992                                         <SYSC_IDLE_NO>,
 993                                         <SYSC_IDLE_SMART>;
 994                         ti,syss-mask = <1>;
 995                         /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
 996                         clocks = <&l4sec_clkctrl DRA7_L4SEC_SHAM2_CLKCTRL 0>;
 997                         clock-names = "fck";
 998                         #address-cells = <1>;
 999                         #size-cells = <1>;
1000                         ranges = <0x0 0x42701000 0x1000>;
1001
1002                         sham2: sham@0 {
1003                                 compatible = "ti,omap5-sham";
1004                                 reg = <0 0x300>;
1005                                 interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
1006                                 dmas = <&edma_xbar 165 0>;
1007                                 dma-names = "rx";
1008                                 clocks = <&l3_iclk_div>;
1009                                 clock-names = "fck";
1010                         };
1011                 };
1012
1013                 iva_hd_target: target-module@5a000000 {
1014                         compatible = "ti,sysc-omap4", "ti,sysc";
1015                         reg = <0x5a05a400 0x4>,
1016                               <0x5a05a410 0x4>;
1017                         reg-names = "rev", "sysc";
1018                         ti,sysc-midle = <SYSC_IDLE_FORCE>,
1019                                         <SYSC_IDLE_NO>,
1020                                         <SYSC_IDLE_SMART>;
1021                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1022                                         <SYSC_IDLE_NO>,
1023                                         <SYSC_IDLE_SMART>;
1024                         power-domains = <&prm_iva>;
1025                         resets = <&prm_iva 2>;
1026                         reset-names = "rstctrl";
1027                         clocks = <&iva_clkctrl DRA7_IVA_CLKCTRL 0>;
1028                         clock-names = "fck";
1029                         #address-cells = <1>;
1030                         #size-cells = <1>;
1031                         ranges = <0x5a000000 0x5a000000 0x1000000>,
1032                                  <0x5b000000 0x5b000000 0x1000000>;
1033
1034                         iva {
1035                                 compatible = "ti,ivahd";
1036                         };
1037                 };
1038
1039                 opp_supply_mpu: opp-supply@4a003b20 {
1040                         compatible = "ti,omap5-opp-supply";
1041                         reg = <0x4a003b20 0xc>;
1042                         ti,efuse-settings = <
1043                         /* uV   offset */
1044                         1060000 0x0
1045                         1160000 0x4
1046                         1210000 0x8
1047                         >;
1048                         ti,absolute-max-voltage-uv = <1500000>;
1049                 };
1050
1051         };
1052
1053         thermal_zones: thermal-zones {
1054                 #include "omap4-cpu-thermal.dtsi"
1055                 #include "omap5-gpu-thermal.dtsi"
1056                 #include "omap5-core-thermal.dtsi"
1057                 #include "dra7-dspeve-thermal.dtsi"
1058                 #include "dra7-iva-thermal.dtsi"
1059         };
1060
1061 };
1062
1063 &cpu_thermal {
1064         polling-delay = <500>; /* milliseconds */
1065         coefficients = <0 2000>;
1066 };
1067
1068 &gpu_thermal {
1069         coefficients = <0 2000>;
1070 };
1071
1072 &core_thermal {
1073         coefficients = <0 2000>;
1074 };
1075
1076 &dspeve_thermal {
1077         coefficients = <0 2000>;
1078 };
1079
1080 &iva_thermal {
1081         coefficients = <0 2000>;
1082 };
1083
1084 &cpu_crit {
1085         temperature = <120000>; /* milli Celsius */
1086 };
1087
1088 &core_crit {
1089         temperature = <120000>; /* milli Celsius */
1090 };
1091
1092 &gpu_crit {
1093         temperature = <120000>; /* milli Celsius */
1094 };
1095
1096 &dspeve_crit {
1097         temperature = <120000>; /* milli Celsius */
1098 };
1099
1100 &iva_crit {
1101         temperature = <120000>; /* milli Celsius */
1102 };
1103
1104 #include "dra7-l4.dtsi"
1105 #include "dra7xx-clocks.dtsi"
1106
1107 &prm {
1108         prm_mpu: prm@300 {
1109                 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1110                 reg = <0x300 0x100>;
1111                 #power-domain-cells = <0>;
1112         };
1113
1114         prm_dsp1: prm@400 {
1115                 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1116                 reg = <0x400 0x100>;
1117                 #reset-cells = <1>;
1118                 #power-domain-cells = <0>;
1119         };
1120
1121         prm_ipu: prm@500 {
1122                 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1123                 reg = <0x500 0x100>;
1124                 #reset-cells = <1>;
1125                 #power-domain-cells = <0>;
1126         };
1127
1128         prm_coreaon: prm@628 {
1129                 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1130                 reg = <0x628 0xd8>;
1131                 #power-domain-cells = <0>;
1132         };
1133
1134         prm_core: prm@700 {
1135                 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1136                 reg = <0x700 0x100>;
1137                 #reset-cells = <1>;
1138                 #power-domain-cells = <0>;
1139         };
1140
1141         prm_iva: prm@f00 {
1142                 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1143                 reg = <0xf00 0x100>;
1144                 #reset-cells = <1>;
1145                 #power-domain-cells = <0>;
1146         };
1147
1148         prm_cam: prm@1000 {
1149                 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1150                 reg = <0x1000 0x100>;
1151                 #power-domain-cells = <0>;
1152         };
1153
1154         prm_dss: prm@1100 {
1155                 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1156                 reg = <0x1100 0x100>;
1157                 #power-domain-cells = <0>;
1158         };
1159
1160         prm_gpu: prm@1200 {
1161                 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1162                 reg = <0x1200 0x100>;
1163                 #power-domain-cells = <0>;
1164         };
1165
1166         prm_l3init: prm@1300 {
1167                 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1168                 reg = <0x1300 0x100>;
1169                 #reset-cells = <1>;
1170                 #power-domain-cells = <0>;
1171         };
1172
1173         prm_l4per: prm@1400 {
1174                 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1175                 reg = <0x1400 0x100>;
1176                 #power-domain-cells = <0>;
1177         };
1178
1179         prm_custefuse: prm@1600 {
1180                 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1181                 reg = <0x1600 0x100>;
1182                 #power-domain-cells = <0>;
1183         };
1184
1185         prm_wkupaon: prm@1724 {
1186                 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1187                 reg = <0x1724 0x100>;
1188                 #power-domain-cells = <0>;
1189         };
1190
1191         prm_dsp2: prm@1b00 {
1192                 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1193                 reg = <0x1b00 0x40>;
1194                 #reset-cells = <1>;
1195                 #power-domain-cells = <0>;
1196         };
1197
1198         prm_eve1: prm@1b40 {
1199                 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1200                 reg = <0x1b40 0x40>;
1201                 #power-domain-cells = <0>;
1202         };
1203
1204         prm_eve2: prm@1b80 {
1205                 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1206                 reg = <0x1b80 0x40>;
1207                 #power-domain-cells = <0>;
1208         };
1209
1210         prm_eve3: prm@1bc0 {
1211                 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1212                 reg = <0x1bc0 0x40>;
1213                 #power-domain-cells = <0>;
1214         };
1215
1216         prm_eve4: prm@1c00 {
1217                 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1218                 reg = <0x1c00 0x60>;
1219                 #power-domain-cells = <0>;
1220         };
1221
1222         prm_rtc: prm@1c60 {
1223                 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1224                 reg = <0x1c60 0x20>;
1225                 #power-domain-cells = <0>;
1226         };
1227
1228         prm_vpe: prm@1c80 {
1229                 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1230                 reg = <0x1c80 0x80>;
1231                 #power-domain-cells = <0>;
1232         };
1233 };
1234
1235 /* Preferred always-on timer for clockevent */
1236 &timer1_target {
1237         ti,no-reset-on-init;
1238         ti,no-idle;
1239         timer@0 {
1240                 assigned-clocks = <&wkupaon_clkctrl DRA7_TIMER1_CLKCTRL 24>;
1241                 assigned-clock-parents = <&sys_32k_ck>;
1242         };
1243 };