arch/arm/boot/dts/dm816x.dtsi

   1 /*
   2  * This file is licensed under the terms of the GNU General Public License
   3  * version 2.  This program is licensed "as is" without any warranty of any
   4  * kind, whether express or implied.
   5  */
   6
   7 #include <dt-bindings/bus/ti-sysc.h>
   8 #include <dt-bindings/clock/dm816.h>
   9 #include <dt-bindings/gpio/gpio.h>
  10 #include <dt-bindings/pinctrl/omap.h>
  11
  12 / {
  13         compatible = "ti,dm816";
  14         interrupt-parent = <&intc>;
  15         #address-cells = <1>;
  16         #size-cells = <1>;
  17         chosen { };
  18
  19         aliases {
  20                 i2c0 = &i2c1;
  21                 i2c1 = &i2c2;
  22                 serial0 = &uart1;
  23                 serial1 = &uart2;
  24                 serial2 = &uart3;
  25                 ethernet0 = &eth0;
  26                 ethernet1 = &eth1;
  27         };
  28
  29         cpus {
  30                 #address-cells = <1>;
  31                 #size-cells = <0>;
  32                 cpu@0 {
  33                         compatible = "arm,cortex-a8";
  34                         device_type = "cpu";
  35                         reg = <0>;
  36                 };
  37         };
  38
  39         pmu {
  40                 compatible = "arm,cortex-a8-pmu";
  41                 interrupts = <3>;
  42         };
  43
  44         /*
  45          * The soc node represents the soc top level view. It is used for IPs
  46          * that are not memory mapped in the MPU view or for the MPU itself.
  47          */
  48         soc {
  49                 compatible = "ti,omap-infra";
  50                 mpu {
  51                         compatible = "ti,omap3-mpu";
  52                         ti,hwmods = "mpu";
  53                 };
  54         };
  55
  56         /*
  57          * XXX: Use a flat representation of the dm816x interconnect.
  58          * The real dm816x interconnect network is quite complex. Since
  59          * it will not bring real advantage to represent that in DT
  60          * for the moment, just use a fake OCP bus entry to represent
  61          * the whole bus hierarchy.
  62          */
  63         ocp {
  64                 compatible = "simple-bus";
  65                 reg = <0x44000000 0x10000>;
  66                 interrupts = <9 10>;
  67                 #address-cells = <1>;
  68                 #size-cells = <1>;
  69                 ranges;
  70
  71                 prcm: prcm@48180000 {
  72                         compatible = "ti,dm816-prcm", "simple-bus";
  73                         reg = <0x48180000 0x4000>;
  74                         #address-cells = <1>;
  75                         #size-cells = <1>;
  76                         ranges = <0 0x48180000 0x4000>;
  77
  78                         prcm_clocks: clocks {
  79                                 #address-cells = <1>;
  80                                 #size-cells = <0>;
  81                         };
  82
  83                         prcm_clockdomains: clockdomains {
  84                         };
  85                 };
  86
  87                 scrm: scrm@48140000 {
  88                         compatible = "ti,dm816-scrm", "simple-bus";
  89                         reg = <0x48140000 0x21000>;
  90                         #address-cells = <1>;
  91                         #size-cells = <1>;
  92                         #pinctrl-cells = <1>;
  93                         ranges = <0 0x48140000 0x21000>;
  94
  95                         dm816x_pinmux: pinmux@800 {
  96                                 compatible = "pinctrl-single";
  97                                 reg = <0x800 0x50a>;
  98                                 #address-cells = <1>;
  99                                 #size-cells = <0>;
 100                                 #pinctrl-cells = <1>;
 101                                 pinctrl-single,register-width = <16>;
 102                                 pinctrl-single,function-mask = <0xf>;
 103                         };
 104
 105                         /* Device Configuration Registers */
 106                         scm_conf: syscon@600 {
 107                                 compatible = "syscon", "simple-bus";
 108                                 reg = <0x600 0x110>;
 109                                 #address-cells = <1>;
 110                                 #size-cells = <1>;
 111                                 ranges = <0 0x600 0x110>;
 112
 113                                 usb_phy0: usb-phy@20 {
 114                                         compatible = "ti,dm8168-usb-phy";
 115                                         reg = <0x20 0x8>;
 116                                         reg-names = "phy";
 117                                         clocks = <&main_fapll 6>;
 118                                         clock-names = "refclk";
 119                                         #phy-cells = <0>;
 120                                         syscon = <&scm_conf>;
 121                                 };
 122
 123                                 usb_phy1: usb-phy@28 {
 124                                         compatible = "ti,dm8168-usb-phy";
 125                                         reg = <0x28 0x8>;
 126                                         reg-names = "phy";
 127                                         clocks = <&main_fapll 6>;
 128                                         clock-names = "refclk";
 129                                         #phy-cells = <0>;
 130                                         syscon = <&scm_conf>;
 131                                 };
 132                         };
 133
 134                         scrm_clocks: clocks {
 135                                 #address-cells = <1>;
 136                                 #size-cells = <0>;
 137                         };
 138
 139                         scrm_clockdomains: clockdomains {
 140                         };
 141                 };
 142
 143                 target-module@49000000 {
 144                         compatible = "ti,sysc-omap4", "ti,sysc";
 145                         reg = <0x49000000 0x4>;
 146                         reg-names = "rev";
 147                         clocks = <&alwon_clkctrl DM816_TPCC_CLKCTRL 0>;
 148                         clock-names = "fck";
 149                         #address-cells = <1>;
 150                         #size-cells = <1>;
 151                         ranges = <0x0 0x49000000 0x10000>;
 152
 153                         edma: dma@0 {
 154                                 compatible = "ti,edma3-tpcc";
 155                                 reg = <0 0x10000>;
 156                                 reg-names = "edma3_cc";
 157                                 interrupts = <12 13 14>;
 158                                 interrupt-names = "edma3_ccint", "edma3_mperr",
 159                                                   "edma3_ccerrint";
 160                                 dma-requests = <64>;
 161                                 #dma-cells = <2>;
 162
 163                                 ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
 164                                            <&edma_tptc2 3>, <&edma_tptc3 0>;
 165
 166                                 ti,edma-memcpy-channels = <20 21>;
 167                         };
 168                 };
 169
 170                 target-module@49800000 {
 171                         compatible = "ti,sysc-omap4", "ti,sysc";
 172                         reg = <0x49800000 0x4>,
 173                               <0x49800010 0x4>;
 174                         reg-names = "rev", "sysc";
 175                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 176                         ti,sysc-midle = <SYSC_IDLE_FORCE>;
 177                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 178                                         <SYSC_IDLE_SMART>;
 179                         clocks = <&alwon_clkctrl DM816_TPTC0_CLKCTRL 0>;
 180                         clock-names = "fck";
 181                         #address-cells = <1>;
 182                         #size-cells = <1>;
 183                         ranges = <0x0 0x49800000 0x100000>;
 184
 185                         edma_tptc0: dma@0 {
 186                                 compatible = "ti,edma3-tptc";
 187                                 reg = <0 0x100000>;
 188                                 interrupts = <112>;
 189                                 interrupt-names = "edma3_tcerrint";
 190                         };
 191                 };
 192
 193                 target-module@49900000 {
 194                         compatible = "ti,sysc-omap4", "ti,sysc";
 195                         reg = <0x49900000 0x4>,
 196                               <0x49900010 0x4>;
 197                         reg-names = "rev", "sysc";
 198                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 199                         ti,sysc-midle = <SYSC_IDLE_FORCE>;
 200                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 201                                         <SYSC_IDLE_SMART>;
 202                         clocks = <&alwon_clkctrl DM816_TPTC1_CLKCTRL 0>;
 203                         clock-names = "fck";
 204                         #address-cells = <1>;
 205                         #size-cells = <1>;
 206                         ranges = <0x0 0x49900000 0x100000>;
 207
 208                         edma_tptc1: dma@0 {
 209                                 compatible = "ti,edma3-tptc";
 210                                 reg = <0 0x100000>;
 211                                 interrupts = <113>;
 212                                 interrupt-names = "edma3_tcerrint";
 213                         };
 214                 };
 215
 216                 target-module@49a00000 {
 217                         compatible = "ti,sysc-omap4", "ti,sysc";
 218                         reg = <0x49a00000 0x4>,
 219                               <0x49a00010 0x4>;
 220                         reg-names = "rev", "sysc";
 221                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 222                         ti,sysc-midle = <SYSC_IDLE_FORCE>;
 223                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 224                                         <SYSC_IDLE_SMART>;
 225                         clocks = <&alwon_clkctrl DM816_TPTC2_CLKCTRL 0>;
 226                         clock-names = "fck";
 227                         #address-cells = <1>;
 228                         #size-cells = <1>;
 229                         ranges = <0x0 0x49a00000 0x100000>;
 230
 231                         edma_tptc2: dma@0 {
 232                                 compatible = "ti,edma3-tptc";
 233                                 reg = <0 0x100000>;
 234                                 interrupts = <114>;
 235                                 interrupt-names = "edma3_tcerrint";
 236                         };
 237                 };
 238
 239                 target-module@49b00000 {
 240                         compatible = "ti,sysc-omap4", "ti,sysc";
 241                         reg = <0x49b00000 0x4>,
 242                               <0x49b00010 0x4>;
 243                         reg-names = "rev", "sysc";
 244                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 245                         ti,sysc-midle = <SYSC_IDLE_FORCE>;
 246                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 247                                         <SYSC_IDLE_SMART>;
 248                         clocks = <&alwon_clkctrl DM816_TPTC3_CLKCTRL 0>;
 249                         clock-names = "fck";
 250                         #address-cells = <1>;
 251                         #size-cells = <1>;
 252                         ranges = <0x0 0x49b00000 0x100000>;
 253
 254                         edma_tptc3: dma@0 {
 255                                 compatible = "ti,edma3-tptc";
 256                                 reg = <0 0x100000>;
 257                                 interrupts = <115>;
 258                                 interrupt-names = "edma3_tcerrint";
 259                         };
 260                 };
 261
 262                 elm: elm@48080000 {
 263                         compatible = "ti,am3352-elm";
 264                         ti,hwmods = "elm";
 265                         reg = <0x48080000 0x2000>;
 266                         interrupts = <4>;
 267                 };
 268
 269                 gpio1: gpio@48032000 {
 270                         compatible = "ti,omap4-gpio";
 271                         ti,hwmods = "gpio1";
 272                         ti,gpio-always-on;
 273                         reg = <0x48032000 0x1000>;
 274                         interrupts = <96>;
 275                         gpio-controller;
 276                         #gpio-cells = <2>;
 277                         interrupt-controller;
 278                         #interrupt-cells = <2>;
 279                 };
 280
 281                 gpio2: gpio@4804c000 {
 282                         compatible = "ti,omap4-gpio";
 283                         ti,hwmods = "gpio2";
 284                         ti,gpio-always-on;
 285                         reg = <0x4804c000 0x1000>;
 286                         interrupts = <98>;
 287                         gpio-controller;
 288                         #gpio-cells = <2>;
 289                         interrupt-controller;
 290                         #interrupt-cells = <2>;
 291                 };
 292
 293                 gpmc: gpmc@50000000 {
 294                         compatible = "ti,am3352-gpmc";
 295                         ti,hwmods = "gpmc";
 296                         reg = <0x50000000 0x2000>;
 297                         #address-cells = <2>;
 298                         #size-cells = <1>;
 299                         interrupts = <100>;
 300                         dmas = <&edma 52 0>;
 301                         dma-names = "rxtx";
 302                         gpmc,num-cs = <6>;
 303                         gpmc,num-waitpins = <2>;
 304                         interrupt-controller;
 305                         #interrupt-cells = <2>;
 306                         gpio-controller;
 307                         #gpio-cells = <2>;
 308                 };
 309
 310                 i2c1: i2c@48028000 {
 311                         compatible = "ti,omap4-i2c";
 312                         ti,hwmods = "i2c1";
 313                         reg = <0x48028000 0x1000>;
 314                         #address-cells = <1>;
 315                         #size-cells = <0>;
 316                         interrupts = <70>;
 317                 };
 318
 319                 i2c2: i2c@4802a000 {
 320                         compatible = "ti,omap4-i2c";
 321                         ti,hwmods = "i2c2";
 322                         reg = <0x4802a000 0x1000>;
 323                         #address-cells = <1>;
 324                         #size-cells = <0>;
 325                         interrupts = <71>;
 326                 };
 327
 328                 intc: interrupt-controller@48200000 {
 329                         compatible = "ti,dm816-intc";
 330                         interrupt-controller;
 331                         #interrupt-cells = <1>;
 332                         reg = <0x48200000 0x1000>;
 333                 };
 334
 335                 rtc: rtc@480c0000 {
 336                         compatible = "ti,am3352-rtc", "ti,da830-rtc";
 337                         reg = <0x480c0000 0x1000>;
 338                         interrupts = <75 76>;
 339                         ti,hwmods = "rtc";
 340                 };
 341
 342                 mailbox: mailbox@480c8000 {
 343                         compatible = "ti,omap4-mailbox";
 344                         reg = <0x480c8000 0x2000>;
 345                         interrupts = <77>;
 346                         ti,hwmods = "mailbox";
 347                         #mbox-cells = <1>;
 348                         ti,mbox-num-users = <4>;
 349                         ti,mbox-num-fifos = <12>;
 350                         mbox_dsp: mbox-dsp {
 351                                 ti,mbox-tx = <3 0 0>;
 352                                 ti,mbox-rx = <0 0 0>;
 353                         };
 354                 };
 355
 356                 spinbox: spinbox@480ca000 {
 357                         compatible = "ti,omap4-hwspinlock";
 358                         reg = <0x480ca000 0x2000>;
 359                         ti,hwmods = "spinbox";
 360                         #hwlock-cells = <1>;
 361                 };
 362
 363                 mdio: mdio@4a100800 {
 364                         compatible = "ti,davinci_mdio";
 365                         #address-cells = <1>;
 366                         #size-cells = <0>;
 367                         reg = <0x4a100800 0x100>;
 368                         ti,hwmods = "davinci_mdio";
 369                         bus_freq = <1000000>;
 370                         phy0: ethernet-phy@0 {
 371                                 reg = <1>;
 372                         };
 373                         phy1: ethernet-phy@1 {
 374                                 reg = <2>;
 375                         };
 376                 };
 377
 378                 eth0: ethernet@4a100000 {
 379                         compatible = "ti,dm816-emac";
 380                         ti,hwmods = "emac0";
 381                         reg = <0x4a100000 0x800
 382                                0x4a100900 0x3700>;
 383                         clocks = <&sysclk24_ck>;
 384                         syscon = <&scm_conf>;
 385                         ti,davinci-ctrl-reg-offset = <0>;
 386                         ti,davinci-ctrl-mod-reg-offset = <0x900>;
 387                         ti,davinci-ctrl-ram-offset = <0x2000>;
 388                         ti,davinci-ctrl-ram-size = <0x2000>;
 389                         interrupts = <40 41 42 43>;
 390                         phy-handle = <&phy0>;
 391                 };
 392
 393                 eth1: ethernet@4a120000 {
 394                         compatible = "ti,dm816-emac";
 395                         ti,hwmods = "emac1";
 396                         reg = <0x4a120000 0x4000>;
 397                         clocks = <&sysclk24_ck>;
 398                         syscon = <&scm_conf>;
 399                         ti,davinci-ctrl-reg-offset = <0>;
 400                         ti,davinci-ctrl-mod-reg-offset = <0x900>;
 401                         ti,davinci-ctrl-ram-offset = <0x2000>;
 402                         ti,davinci-ctrl-ram-size = <0x2000>;
 403                         interrupts = <44 45 46 47>;
 404                         phy-handle = <&phy1>;
 405                 };
 406
 407                 sata: sata@4a140000 {
 408                         compatible = "ti,dm816-ahci";
 409                         reg = <0x4a140000 0x10000>;
 410                         interrupts = <16>;
 411                         ti,hwmods = "sata";
 412                 };
 413
 414                 mcspi1: spi@48030000 {
 415                         compatible = "ti,omap4-mcspi";
 416                         reg = <0x48030000 0x1000>;
 417                         #address-cells = <1>;
 418                         #size-cells = <0>;
 419                         interrupts = <65>;
 420                         ti,spi-num-cs = <4>;
 421                         ti,hwmods = "mcspi1";
 422                         dmas = <&edma 16 0 &edma 17 0
 423                                 &edma 18 0 &edma 19 0
 424                                 &edma 20 0 &edma 21 0
 425                                 &edma 22 0 &edma 23 0>;
 426                         dma-names = "tx0", "rx0", "tx1", "rx1",
 427                                     "tx2", "rx2", "tx3", "rx3";
 428                 };
 429
 430                 mmc1: mmc@48060000 {
 431                         compatible = "ti,omap4-hsmmc";
 432                         reg = <0x48060000 0x11000>;
 433                         ti,hwmods = "mmc1";
 434                         interrupts = <64>;
 435                         dmas = <&edma 24 0 &edma 25 0>;
 436                         dma-names = "tx", "rx";
 437                 };
 438
 439                 timer1_target: target-module@4802e000 {
 440                         compatible = "ti,sysc-omap4-timer", "ti,sysc";
 441                         reg = <0x4802e000 0x4>,
 442                               <0x4802e010 0x4>;
 443                         reg-names = "rev", "sysc";
 444                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 445                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 446                                         <SYSC_IDLE_NO>,
 447                                         <SYSC_IDLE_SMART>,
 448                                         <SYSC_IDLE_SMART_WKUP>;
 449                         clocks = <&alwon_clkctrl DM816_TIMER1_CLKCTRL 0>;
 450                         clock-names = "fck";
 451                         #address-cells = <1>;
 452                         #size-cells = <1>;
 453                         ranges = <0x0 0x4802e000 0x1000>;
 454
 455                         timer1: timer@0 {
 456                                 compatible = "ti,dm816-timer";
 457                                 reg = <0 0x1000>;
 458                                 interrupts = <67>;
 459                                 ti,timer-alwon;
 460                                 clocks = <&alwon_clkctrl DM816_TIMER1_CLKCTRL 0>;
 461                                 clock-names = "fck";
 462                         };
 463                 };
 464
 465                 timer2_target: target-module@48040000 {
 466                         compatible = "ti,sysc-omap4-timer", "ti,sysc";
 467                         reg = <0x48040000 0x4>,
 468                               <0x48040010 0x4>;
 469                         reg-names = "rev", "sysc";
 470                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 471                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 472                                         <SYSC_IDLE_NO>,
 473                                         <SYSC_IDLE_SMART>,
 474                                         <SYSC_IDLE_SMART_WKUP>;
 475                         clocks = <&alwon_clkctrl DM816_TIMER2_CLKCTRL 0>;
 476                         clock-names = "fck";
 477                         #address-cells = <1>;
 478                         #size-cells = <1>;
 479                         ranges = <0x0 0x48040000 0x1000>;
 480
 481                         timer2: timer@0 {
 482                                 compatible = "ti,dm816-timer";
 483                                 reg = <0 0x1000>;
 484                                 interrupts = <68>;
 485                                 clocks = <&alwon_clkctrl DM816_TIMER2_CLKCTRL 0>;
 486                                 clock-names = "fck";
 487                         };
 488                 };
 489
 490                 timer3: timer@48042000 {
 491                         compatible = "ti,dm816-timer";
 492                         reg = <0x48042000 0x2000>;
 493                         interrupts = <69>;
 494                         ti,hwmods = "timer3";
 495                 };
 496
 497                 timer4: timer@48044000 {
 498                         compatible = "ti,dm816-timer";
 499                         reg = <0x48044000 0x2000>;
 500                         interrupts = <92>;
 501                         ti,hwmods = "timer4";
 502                         ti,timer-pwm;
 503                 };
 504
 505                 timer5: timer@48046000 {
 506                         compatible = "ti,dm816-timer";
 507                         reg = <0x48046000 0x2000>;
 508                         interrupts = <93>;
 509                         ti,hwmods = "timer5";
 510                         ti,timer-pwm;
 511                 };
 512
 513                 timer6: timer@48048000 {
 514                         compatible = "ti,dm816-timer";
 515                         reg = <0x48048000 0x2000>;
 516                         interrupts = <94>;
 517                         ti,hwmods = "timer6";
 518                         ti,timer-pwm;
 519                 };
 520
 521                 timer7: timer@4804a000 {
 522                         compatible = "ti,dm816-timer";
 523                         reg = <0x4804a000 0x2000>;
 524                         interrupts = <95>;
 525                         ti,hwmods = "timer7";
 526                         ti,timer-pwm;
 527                 };
 528
 529                 uart1: uart@48020000 {
 530                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 531                         ti,hwmods = "uart1";
 532                         reg = <0x48020000 0x2000>;
 533                         clock-frequency = <48000000>;
 534                         interrupts = <72>;
 535                         dmas = <&edma 26 0 &edma 27 0>;
 536                         dma-names = "tx", "rx";
 537                 };
 538
 539                 uart2: uart@48022000 {
 540                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 541                         ti,hwmods = "uart2";
 542                         reg = <0x48022000 0x2000>;
 543                         clock-frequency = <48000000>;
 544                         interrupts = <73>;
 545                         dmas = <&edma 28 0 &edma 29 0>;
 546                         dma-names = "tx", "rx";
 547                 };
 548
 549                 uart3: uart@48024000 {
 550                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 551                         ti,hwmods = "uart3";
 552                         reg = <0x48024000 0x2000>;
 553                         clock-frequency = <48000000>;
 554                         interrupts = <74>;
 555                         dmas = <&edma 30 0 &edma 31 0>;
 556                         dma-names = "tx", "rx";
 557                 };
 558
 559                 /* NOTE: USB needs a transceiver driver for phys to work */
 560                 usb: usb_otg_hs@47401000 {
 561                         compatible = "ti,am33xx-usb";
 562                         reg = <0x47401000 0x400000>;
 563                         ranges;
 564                         #address-cells = <1>;
 565                         #size-cells = <1>;
 566                         ti,hwmods = "usb_otg_hs";
 567
 568                         usb0: usb@47401000 {
 569                                 compatible = "ti,musb-dm816";
 570                                 reg = <0x47401400 0x400
 571                                        0x47401000 0x200>;
 572                                 reg-names = "mc", "control";
 573                                 interrupts = <18>;
 574                                 interrupt-names = "mc";
 575                                 dr_mode = "host";
 576                                 interface-type = <0>;
 577                                 phys = <&usb_phy0>;
 578                                 phy-names = "usb2-phy";
 579                                 mentor,multipoint = <1>;
 580                                 mentor,num-eps = <16>;
 581                                 mentor,ram-bits = <12>;
 582                                 mentor,power = <500>;
 583
 584                                 dmas = <&cppi41dma  0 0 &cppi41dma  1 0
 585                                         &cppi41dma  2 0 &cppi41dma  3 0
 586                                         &cppi41dma  4 0 &cppi41dma  5 0
 587                                         &cppi41dma  6 0 &cppi41dma  7 0
 588                                         &cppi41dma  8 0 &cppi41dma  9 0
 589                                         &cppi41dma 10 0 &cppi41dma 11 0
 590                                         &cppi41dma 12 0 &cppi41dma 13 0
 591                                         &cppi41dma 14 0 &cppi41dma  0 1
 592                                         &cppi41dma  1 1 &cppi41dma  2 1
 593                                         &cppi41dma  3 1 &cppi41dma  4 1
 594                                         &cppi41dma  5 1 &cppi41dma  6 1
 595                                         &cppi41dma  7 1 &cppi41dma  8 1
 596                                         &cppi41dma  9 1 &cppi41dma 10 1
 597                                         &cppi41dma 11 1 &cppi41dma 12 1
 598                                         &cppi41dma 13 1 &cppi41dma 14 1>;
 599                                 dma-names =
 600                                         "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
 601                                         "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
 602                                         "rx14", "rx15",
 603                                         "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
 604                                         "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
 605                                         "tx14", "tx15";
 606                         };
 607
 608                         usb1: usb@47401800 {
 609                                 compatible = "ti,musb-dm816";
 610                                 reg = <0x47401c00 0x400
 611                                        0x47401800 0x200>;
 612                                 reg-names = "mc", "control";
 613                                 interrupts = <19>;
 614                                 interrupt-names = "mc";
 615                                 dr_mode = "host";
 616                                 interface-type = <0>;
 617                                 phys = <&usb_phy1>;
 618                                 phy-names = "usb2-phy";
 619                                 mentor,multipoint = <1>;
 620                                 mentor,num-eps = <16>;
 621                                 mentor,ram-bits = <12>;
 622                                 mentor,power = <500>;
 623
 624                                 dmas = <&cppi41dma 15 0 &cppi41dma 16 0
 625                                         &cppi41dma 17 0 &cppi41dma 18 0
 626                                         &cppi41dma 19 0 &cppi41dma 20 0
 627                                         &cppi41dma 21 0 &cppi41dma 22 0
 628                                         &cppi41dma 23 0 &cppi41dma 24 0
 629                                         &cppi41dma 25 0 &cppi41dma 26 0
 630                                         &cppi41dma 27 0 &cppi41dma 28 0
 631                                         &cppi41dma 29 0 &cppi41dma 15 1
 632                                         &cppi41dma 16 1 &cppi41dma 17 1
 633                                         &cppi41dma 18 1 &cppi41dma 19 1
 634                                         &cppi41dma 20 1 &cppi41dma 21 1
 635                                         &cppi41dma 22 1 &cppi41dma 23 1
 636                                         &cppi41dma 24 1 &cppi41dma 25 1
 637                                         &cppi41dma 26 1 &cppi41dma 27 1
 638                                         &cppi41dma 28 1 &cppi41dma 29 1>;
 639                                 dma-names =
 640                                         "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
 641                                         "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
 642                                         "rx14", "rx15",
 643                                         "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
 644                                         "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
 645                                         "tx14", "tx15";
 646                         };
 647
 648                         cppi41dma: dma-controller@47402000 {
 649                                 compatible = "ti,am3359-cppi41";
 650                                 reg =  <0x47400000 0x1000
 651                                         0x47402000 0x1000
 652                                         0x47403000 0x1000
 653                                         0x47404000 0x4000>;
 654                                 reg-names = "glue", "controller", "scheduler", "queuemgr";
 655                                 interrupts = <17>;
 656                                 interrupt-names = "glue";
 657                                 #dma-cells = <2>;
 658                                 #dma-channels = <30>;
 659                                 #dma-requests = <256>;
 660                         };
 661                 };
 662
 663                 wd_timer2: wd_timer@480c2000 {
 664                         compatible = "ti,omap3-wdt";
 665                         ti,hwmods = "wd_timer";
 666                         reg = <0x480c2000 0x1000>;
 667                         interrupts = <0>;
 668                 };
 669         };
 670 };
 671
 672 #include "dm816x-clocks.dtsi"
 673
 674 /* Preferred always-on timer for clocksource */
 675 &timer1_target {
 676         ti,no-reset-on-init;
 677         ti,no-idle;
 678         timer@0 {
 679                 assigned-clocks = <&timer1_fck>;
 680                 assigned-clock-parents = <&sys_clkin_ck>;
 681         };
 682 };
 683
 684 /* Preferred timer for clockevent */
 685 &timer2_target {
 686         ti,no-reset-on-init;
 687         ti,no-idle;
 688         timer@0 {
 689                 assigned-clocks = <&timer2_fck>;
 690                 assigned-clock-parents = <&sys_clkin_ck>;
 691         };
 692 };