arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /*
   3  * Broadcom BCM470X / BCM5301X ARM platform code.
   4  * DTS for D-Link DIR-885L
   5  *
   6  * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
   7  */
   8
   9 /dts-v1/;
  10
  11 #include "bcm47094.dtsi"
  12 #include "bcm5301x-nand-cs0-bch1.dtsi"
  13
  14 / {
  15         compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
  16         model = "D-Link DIR-885L";
  17
  18         chosen {
  19                 bootargs = "console=ttyS0,115200 earlycon";
  20         };
  21
  22         memory@0 {
  23                 device_type = "memory";
  24                 reg = <0x00000000 0x08000000>,
  25                       <0x88000000 0x08000000>;
  26         };
  27
  28         nand_controller: nand-controller@18028000 {
  29                 nand@0 {
  30                         partitions {
  31                                 compatible = "fixed-partitions";
  32                                 #address-cells = <1>;
  33                                 #size-cells = <1>;
  34
  35                                 partition@0 {
  36                                         label = "firmware";
  37                                         reg = <0x00000000 0x08000000>;
  38                                 };
  39                         };
  40                 };
  41         };
  42
  43         leds {
  44                 compatible = "gpio-leds";
  45
  46                 power-white {
  47                         label = "bcm53xx:white:power";
  48                         gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
  49                         linux,default-trigger = "default-on";
  50                 };
  51
  52                 wan-white {
  53                         label = "bcm53xx:white:wan";
  54                         gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
  55                 };
  56
  57                 power-amber {
  58                         label = "bcm53xx:amber:power";
  59                         gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
  60                 };
  61
  62                 wan-amber {
  63                         label = "bcm53xx:amber:wan";
  64                         gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
  65                 };
  66
  67                 usb3-white {
  68                         label = "bcm53xx:white:usb3";
  69                         gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
  70                         trigger-sources = <&ohci_port1>, <&ehci_port1>,
  71                                           <&xhci_port1>;
  72                         linux,default-trigger = "usbport";
  73                 };
  74
  75                 2ghz {
  76                         label = "bcm53xx:white:2ghz";
  77                         gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
  78                 };
  79
  80                 5ghz {
  81                         label = "bcm53xx:white:5ghz";
  82                         gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
  83                 };
  84         };
  85
  86         gpio-keys {
  87                 compatible = "gpio-keys";
  88
  89                 wps {
  90                         label = "WPS";
  91                         linux,code = <KEY_WPS_BUTTON>;
  92                         gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
  93                 };
  94
  95                 /* Switch: router / extender */
  96                 extender {
  97                         label = "Extender";
  98                         linux,code = <BTN_0>;
  99                         gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 100                 };
 101
 102                 restart {
 103                         label = "Reset";
 104                         linux,code = <KEY_RESTART>;
 105                         gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 106                 };
 107         };
 108 };
 109
 110 &usb3 {
 111         vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 112 };
 113
 114 &spi_nor {
 115         status = "okay";
 116 };
 117
 118 &usb3_phy {
 119         status = "okay";
 120 };