arch/arm/boot/dts/aspeed-g6.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 // Copyright 2019 IBM Corp.
   3
   4 #include <dt-bindings/interrupt-controller/arm-gic.h>
   5 #include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
   6 #include <dt-bindings/clock/ast2600-clock.h>
   7
   8 / {
   9         model = "Aspeed BMC";
  10         compatible = "aspeed,ast2600";
  11         #address-cells = <1>;
  12         #size-cells = <1>;
  13         interrupt-parent = <&gic>;
  14
  15         aliases {
  16                 i2c0 = &i2c0;
  17                 i2c1 = &i2c1;
  18                 i2c2 = &i2c2;
  19                 i2c3 = &i2c3;
  20                 i2c4 = &i2c4;
  21                 i2c5 = &i2c5;
  22                 i2c6 = &i2c6;
  23                 i2c7 = &i2c7;
  24                 i2c8 = &i2c8;
  25                 i2c9 = &i2c9;
  26                 i2c10 = &i2c10;
  27                 i2c11 = &i2c11;
  28                 i2c12 = &i2c12;
  29                 i2c13 = &i2c13;
  30                 i2c14 = &i2c14;
  31                 i2c15 = &i2c15;
  32                 serial0 = &uart1;
  33                 serial1 = &uart2;
  34                 serial2 = &uart3;
  35                 serial3 = &uart4;
  36                 serial4 = &uart5;
  37                 serial5 = &vuart1;
  38                 serial6 = &vuart2;
  39         };
  40
  41
  42         cpus {
  43                 #address-cells = <1>;
  44                 #size-cells = <0>;
  45                 enable-method = "aspeed,ast2600-smp";
  46
  47                 cpu@f00 {
  48                         compatible = "arm,cortex-a7";
  49                         device_type = "cpu";
  50                         reg = <0xf00>;
  51                 };
  52
  53                 cpu@f01 {
  54                         compatible = "arm,cortex-a7";
  55                         device_type = "cpu";
  56                         reg = <0xf01>;
  57                 };
  58         };
  59
  60         timer {
  61                 compatible = "arm,armv7-timer";
  62                 interrupt-parent = <&gic>;
  63                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  64                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  65                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  66                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
  67                 clocks = <&syscon ASPEED_CLK_HPLL>;
  68                 arm,cpu-registers-not-fw-configured;
  69                 always-on;
  70         };
  71
  72         edac: sdram@1e6e0000 {
  73                 compatible = "aspeed,ast2600-sdram-edac", "syscon";
  74                 reg = <0x1e6e0000 0x174>;
  75                 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
  76         };
  77
  78         ahb {
  79                 compatible = "simple-bus";
  80                 #address-cells = <1>;
  81                 #size-cells = <1>;
  82                 device_type = "soc";
  83                 ranges;
  84
  85                 gic: interrupt-controller@40461000 {
  86                         compatible = "arm,cortex-a7-gic";
  87                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
  88                         #interrupt-cells = <3>;
  89                         interrupt-controller;
  90                         interrupt-parent = <&gic>;
  91                         reg = <0x40461000 0x1000>,
  92                             <0x40462000 0x1000>,
  93                             <0x40464000 0x2000>,
  94                             <0x40466000 0x2000>;
  95                         };
  96
  97                 fmc: spi@1e620000 {
  98                         reg = < 0x1e620000 0xc4
  99                                 0x20000000 0x10000000 >;
 100                         #address-cells = <1>;
 101                         #size-cells = <0>;
 102                         compatible = "aspeed,ast2600-fmc";
 103                         clocks = <&syscon ASPEED_CLK_AHB>;
 104                         status = "disabled";
 105                         interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 106                         flash@0 {
 107                                 reg = < 0 >;
 108                                 compatible = "jedec,spi-nor";
 109                                 spi-max-frequency = <50000000>;
 110                                 status = "disabled";
 111                         };
 112                         flash@1 {
 113                                 reg = < 1 >;
 114                                 compatible = "jedec,spi-nor";
 115                                 spi-max-frequency = <50000000>;
 116                                 status = "disabled";
 117                         };
 118                         flash@2 {
 119                                 reg = < 2 >;
 120                                 compatible = "jedec,spi-nor";
 121                                 spi-max-frequency = <50000000>;
 122                                 status = "disabled";
 123                         };
 124                 };
 125
 126                 spi1: spi@1e630000 {
 127                         reg = < 0x1e630000 0xc4
 128                                 0x30000000 0x10000000 >;
 129                         #address-cells = <1>;
 130                         #size-cells = <0>;
 131                         compatible = "aspeed,ast2600-spi";
 132                         clocks = <&syscon ASPEED_CLK_AHB>;
 133                         status = "disabled";
 134                         flash@0 {
 135                                 reg = < 0 >;
 136                                 compatible = "jedec,spi-nor";
 137                                 spi-max-frequency = <50000000>;
 138                                 status = "disabled";
 139                         };
 140                         flash@1 {
 141                                 reg = < 1 >;
 142                                 compatible = "jedec,spi-nor";
 143                                 spi-max-frequency = <50000000>;
 144                                 status = "disabled";
 145                         };
 146                 };
 147
 148                 spi2: spi@1e631000 {
 149                         reg = < 0x1e631000 0xc4
 150                                 0x50000000 0x10000000 >;
 151                         #address-cells = <1>;
 152                         #size-cells = <0>;
 153                         compatible = "aspeed,ast2600-spi";
 154                         clocks = <&syscon ASPEED_CLK_AHB>;
 155                         status = "disabled";
 156                         flash@0 {
 157                                 reg = < 0 >;
 158                                 compatible = "jedec,spi-nor";
 159                                 spi-max-frequency = <50000000>;
 160                                 status = "disabled";
 161                         };
 162                         flash@1 {
 163                                 reg = < 1 >;
 164                                 compatible = "jedec,spi-nor";
 165                                 spi-max-frequency = <50000000>;
 166                                 status = "disabled";
 167                         };
 168                         flash@2 {
 169                                 reg = < 2 >;
 170                                 compatible = "jedec,spi-nor";
 171                                 spi-max-frequency = <50000000>;
 172                                 status = "disabled";
 173                         };
 174                 };
 175
 176                 mdio0: mdio@1e650000 {
 177                         compatible = "aspeed,ast2600-mdio";
 178                         reg = <0x1e650000 0x8>;
 179                         #address-cells = <1>;
 180                         #size-cells = <0>;
 181                         status = "disabled";
 182                         pinctrl-names = "default";
 183                         pinctrl-0 = <&pinctrl_mdio1_default>;
 184                 };
 185
 186                 mdio1: mdio@1e650008 {
 187                         compatible = "aspeed,ast2600-mdio";
 188                         reg = <0x1e650008 0x8>;
 189                         #address-cells = <1>;
 190                         #size-cells = <0>;
 191                         status = "disabled";
 192                         pinctrl-names = "default";
 193                         pinctrl-0 = <&pinctrl_mdio2_default>;
 194                 };
 195
 196                 mdio2: mdio@1e650010 {
 197                         compatible = "aspeed,ast2600-mdio";
 198                         reg = <0x1e650010 0x8>;
 199                         #address-cells = <1>;
 200                         #size-cells = <0>;
 201                         status = "disabled";
 202                         pinctrl-names = "default";
 203                         pinctrl-0 = <&pinctrl_mdio3_default>;
 204                 };
 205
 206                 mdio3: mdio@1e650018 {
 207                         compatible = "aspeed,ast2600-mdio";
 208                         reg = <0x1e650018 0x8>;
 209                         #address-cells = <1>;
 210                         #size-cells = <0>;
 211                         status = "disabled";
 212                         pinctrl-names = "default";
 213                         pinctrl-0 = <&pinctrl_mdio4_default>;
 214                 };
 215
 216                 mac0: ftgmac@1e660000 {
 217                         compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
 218                         reg = <0x1e660000 0x180>;
 219                         #address-cells = <1>;
 220                         #size-cells = <0>;
 221                         interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 222                         clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
 223                         status = "disabled";
 224                 };
 225
 226                 mac1: ftgmac@1e680000 {
 227                         compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
 228                         reg = <0x1e680000 0x180>;
 229                         #address-cells = <1>;
 230                         #size-cells = <0>;
 231                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 232                         clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
 233                         status = "disabled";
 234                 };
 235
 236                 mac2: ftgmac@1e670000 {
 237                         compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
 238                         reg = <0x1e670000 0x180>;
 239                         #address-cells = <1>;
 240                         #size-cells = <0>;
 241                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 242                         clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>;
 243                         status = "disabled";
 244                 };
 245
 246                 mac3: ftgmac@1e690000 {
 247                         compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
 248                         reg = <0x1e690000 0x180>;
 249                         #address-cells = <1>;
 250                         #size-cells = <0>;
 251                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 252                         clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>;
 253                         status = "disabled";
 254                 };
 255
 256                 ehci0: usb@1e6a1000 {
 257                         compatible = "aspeed,ast2600-ehci", "generic-ehci";
 258                         reg = <0x1e6a1000 0x100>;
 259                         interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 260                         clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
 261                         pinctrl-names = "default";
 262                         pinctrl-0 = <&pinctrl_usb2ah_default>;
 263                         status = "disabled";
 264                 };
 265
 266                 ehci1: usb@1e6a3000 {
 267                         compatible = "aspeed,ast2600-ehci", "generic-ehci";
 268                         reg = <0x1e6a3000 0x100>;
 269                         interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 270                         clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
 271                         pinctrl-names = "default";
 272                         pinctrl-0 = <&pinctrl_usb2bh_default>;
 273                         status = "disabled";
 274                 };
 275
 276                 uhci: usb@1e6b0000 {
 277                         compatible = "aspeed,ast2600-uhci", "generic-uhci";
 278                         reg = <0x1e6b0000 0x100>;
 279                         interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 280                         #ports = <2>;
 281                         clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
 282                         status = "disabled";
 283                         /*
 284                          * No default pinmux, it will follow EHCI, use an
 285                          * explicit pinmux override if EHCI is not enabled.
 286                          */
 287                 };
 288
 289                 vhub: usb-vhub@1e6a0000 {
 290                         compatible = "aspeed,ast2600-usb-vhub";
 291                         reg = <0x1e6a0000 0x350>;
 292                         interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 293                         clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
 294                         aspeed,vhub-downstream-ports = <7>;
 295                         aspeed,vhub-generic-endpoints = <21>;
 296                         pinctrl-names = "default";
 297                         pinctrl-0 = <&pinctrl_usb2ad_default>;
 298                         status = "disabled";
 299                 };
 300
 301                 apb {
 302                         compatible = "simple-bus";
 303                         #address-cells = <1>;
 304                         #size-cells = <1>;
 305                         ranges;
 306
 307                         syscon: syscon@1e6e2000 {
 308                                 compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
 309                                 reg = <0x1e6e2000 0x1000>;
 310                                 ranges = <0 0x1e6e2000 0x1000>;
 311                                 #address-cells = <1>;
 312                                 #size-cells = <1>;
 313                                 #clock-cells = <1>;
 314                                 #reset-cells = <1>;
 315
 316                                 pinctrl: pinctrl {
 317                                         compatible = "aspeed,ast2600-pinctrl";
 318                                 };
 319
 320                                 silicon-id@14 {
 321                                         compatible = "aspeed,ast2600-silicon-id", "aspeed,silicon-id";
 322                                         reg = <0x14 0x4 0x5b0 0x8>;
 323                                 };
 324
 325                                 smp-memram@180 {
 326                                         compatible = "aspeed,ast2600-smpmem";
 327                                         reg = <0x180 0x40>;
 328                                 };
 329
 330                                 scu_ic0: interrupt-controller@560 {
 331                                         #interrupt-cells = <1>;
 332                                         compatible = "aspeed,ast2600-scu-ic0";
 333                                         reg = <0x560 0x4>;
 334                                         interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 335                                         interrupt-controller;
 336                                 };
 337
 338                                 scu_ic1: interrupt-controller@570 {
 339                                         #interrupt-cells = <1>;
 340                                         compatible = "aspeed,ast2600-scu-ic1";
 341                                         reg = <0x570 0x4>;
 342                                         interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 343                                         interrupt-controller;
 344                                 };
 345                         };
 346
 347                         rng: hwrng@1e6e2524 {
 348                                 compatible = "timeriomem_rng";
 349                                 reg = <0x1e6e2524 0x4>;
 350                                 period = <1>;
 351                                 quality = <100>;
 352                         };
 353
 354                         xdma: xdma@1e6e7000 {
 355                                 compatible = "aspeed,ast2600-xdma";
 356                                 reg = <0x1e6e7000 0x100>;
 357                                 clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
 358                                 resets = <&syscon ASPEED_RESET_DEV_XDMA>, <&syscon ASPEED_RESET_RC_XDMA>;
 359                                 reset-names = "device", "root-complex";
 360                                 interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
 361                                                       <&scu_ic0 ASPEED_AST2600_SCU_IC0_PCIE_PERST_LO_TO_HI>;
 362                                 aspeed,pcie-device = "bmc";
 363                                 aspeed,scu = <&syscon>;
 364                                 status = "disabled";
 365                         };
 366
 367                         gpio0: gpio@1e780000 {
 368                                 #gpio-cells = <2>;
 369                                 gpio-controller;
 370                                 compatible = "aspeed,ast2600-gpio";
 371                                 reg = <0x1e780000 0x400>;
 372                                 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 373                                 gpio-ranges = <&pinctrl 0 0 208>;
 374                                 ngpios = <208>;
 375                                 clocks = <&syscon ASPEED_CLK_APB2>;
 376                                 interrupt-controller;
 377                                 #interrupt-cells = <2>;
 378                         };
 379
 380                         gpio1: gpio@1e780800 {
 381                                 #gpio-cells = <2>;
 382                                 gpio-controller;
 383                                 compatible = "aspeed,ast2600-gpio";
 384                                 reg = <0x1e780800 0x800>;
 385                                 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 386                                 gpio-ranges = <&pinctrl 0 208 36>;
 387                                 ngpios = <36>;
 388                                 clocks = <&syscon ASPEED_CLK_APB1>;
 389                                 interrupt-controller;
 390                                 #interrupt-cells = <2>;
 391                         };
 392
 393                         rtc: rtc@1e781000 {
 394                                 compatible = "aspeed,ast2600-rtc";
 395                                 reg = <0x1e781000 0x18>;
 396                                 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 397                                 status = "disabled";
 398                         };
 399
 400                         timer: timer@1e782000 {
 401                                 compatible = "aspeed,ast2600-timer";
 402                                 reg = <0x1e782000 0x90>;
 403                                 interrupts-extended = <&gic  GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 404                                                 <&gic  GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 405                                                 <&gic  GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
 406                                                 <&gic  GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 407                                                 <&gic  GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
 408                                                 <&gic  GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
 409                                                 <&gic  GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
 410                                                 <&gic  GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 411                                 clocks = <&syscon ASPEED_CLK_APB1>;
 412                                 clock-names = "PCLK";
 413                                 status = "disabled";
 414                         };
 415
 416                         uart1: serial@1e783000 {
 417                                 compatible = "ns16550a";
 418                                 reg = <0x1e783000 0x20>;
 419                                 reg-shift = <2>;
 420                                 reg-io-width = <4>;
 421                                 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 422                                 clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
 423                                 resets = <&lpc_reset 4>;
 424                                 no-loopback-test;
 425                                 pinctrl-names = "default";
 426                                 pinctrl-0 = <&pinctrl_txd1_default &pinctrl_rxd1_default>;
 427                                 status = "disabled";
 428                         };
 429
 430                         uart5: serial@1e784000 {
 431                                 compatible = "ns16550a";
 432                                 reg = <0x1e784000 0x1000>;
 433                                 reg-shift = <2>;
 434                                 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 435                                 clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
 436                                 no-loopback-test;
 437                         };
 438
 439                         wdt1: watchdog@1e785000 {
 440                                 compatible = "aspeed,ast2600-wdt";
 441                                 reg = <0x1e785000 0x40>;
 442                         };
 443
 444                         wdt2: watchdog@1e785040 {
 445                                 compatible = "aspeed,ast2600-wdt";
 446                                 reg = <0x1e785040 0x40>;
 447                                 status = "disabled";
 448                         };
 449
 450                         wdt3: watchdog@1e785080 {
 451                                 compatible = "aspeed,ast2600-wdt";
 452                                 reg = <0x1e785080 0x40>;
 453                                 status = "disabled";
 454                         };
 455
 456                         wdt4: watchdog@1e7850c0 {
 457                                 compatible = "aspeed,ast2600-wdt";
 458                                 reg = <0x1e7850C0 0x40>;
 459                                 status = "disabled";
 460                         };
 461
 462                         lpc: lpc@1e789000 {
 463                                 compatible = "aspeed,ast2600-lpc", "simple-mfd";
 464                                 reg = <0x1e789000 0x1000>;
 465
 466                                 #address-cells = <1>;
 467                                 #size-cells = <1>;
 468                                 ranges = <0x0 0x1e789000 0x1000>;
 469
 470                                 lpc_bmc: lpc-bmc@0 {
 471                                         compatible = "aspeed,ast2600-lpc-bmc", "simple-mfd", "syscon";
 472                                         reg = <0x0 0x80>;
 473                                         reg-io-width = <4>;
 474
 475                                         #address-cells = <1>;
 476                                         #size-cells = <1>;
 477                                         ranges = <0x0 0x0 0x80>;
 478
 479                                         kcs1: kcs@24 {
 480                                                 compatible = "aspeed,ast2500-kcs-bmc-v2";
 481                                                 reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
 482                                                 interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 483                                                 kcs_chan = <1>;
 484                                                 status = "disabled";
 485                                         };
 486                                         kcs2: kcs@28 {
 487                                                 compatible = "aspeed,ast2500-kcs-bmc-v2";
 488                                                 reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
 489                                                 interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
 490                                                 status = "disabled";
 491                                         };
 492                                         kcs3: kcs@2c {
 493                                                 compatible = "aspeed,ast2500-kcs-bmc-v2";
 494                                                 reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
 495                                                 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 496                                                 status = "disabled";
 497                                         };
 498                                 };
 499
 500                                 lpc_host: lpc-host@80 {
 501                                         compatible = "aspeed,ast2600-lpc-host", "simple-mfd", "syscon";
 502                                         reg = <0x80 0x1e0>;
 503                                         reg-io-width = <4>;
 504
 505                                         #address-cells = <1>;
 506                                         #size-cells = <1>;
 507                                         ranges = <0x0 0x80 0x1e0>;
 508
 509                                         kcs4: kcs@94 {
 510                                                 compatible = "aspeed,ast2500-kcs-bmc-v2";
 511                                                 reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>;
 512                                                 interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 513                                                 status = "disabled";
 514                                         };
 515
 516                                         lpc_ctrl: lpc-ctrl@0 {
 517                                                 compatible = "aspeed,ast2600-lpc-ctrl";
 518                                                 reg = <0x0 0x80>;
 519                                                 clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 520                                                 status = "disabled";
 521                                         };
 522
 523                                         lpc_snoop: lpc-snoop@0 {
 524                                                 compatible = "aspeed,ast2600-lpc-snoop";
 525                                                 reg = <0x0 0x80>;
 526                                                 interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 527                                                 status = "disabled";
 528                                         };
 529
 530                                         lhc: lhc@20 {
 531                                                 compatible = "aspeed,ast2600-lhc";
 532                                                 reg = <0x20 0x24 0x48 0x8>;
 533                                         };
 534
 535                                         lpc_reset: reset-controller@18 {
 536                                                 compatible = "aspeed,ast2600-lpc-reset";
 537                                                 reg = <0x18 0x4>;
 538                                                 #reset-cells = <1>;
 539                                         };
 540
 541                                         ibt: ibt@c0 {
 542                                                 compatible = "aspeed,ast2600-ibt-bmc";
 543                                                 reg = <0xc0 0x18>;
 544                                                 interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 545                                                 status = "disabled";
 546                                         };
 547                                 };
 548                         };
 549
 550                         sdc: sdc@1e740000 {
 551                                 compatible = "aspeed,ast2600-sd-controller";
 552                                 reg = <0x1e740000 0x100>;
 553                                 #address-cells = <1>;
 554                                 #size-cells = <1>;
 555                                 ranges = <0 0x1e740000 0x10000>;
 556                                 clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
 557                                 status = "disabled";
 558
 559                                 sdhci0: sdhci@1e740100 {
 560                                         compatible = "aspeed,ast2600-sdhci", "sdhci";
 561                                         reg = <0x100 0x100>;
 562                                         interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 563                                         sdhci,auto-cmd12;
 564                                         clocks = <&syscon ASPEED_CLK_SDIO>;
 565                                         status = "disabled";
 566                                 };
 567
 568                                 sdhci1: sdhci@1e740200 {
 569                                         compatible = "aspeed,ast2600-sdhci", "sdhci";
 570                                         reg = <0x200 0x100>;
 571                                         interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 572                                         sdhci,auto-cmd12;
 573                                         clocks = <&syscon ASPEED_CLK_SDIO>;
 574                                         status = "disabled";
 575                                 };
 576                         };
 577
 578                         emmc_controller: sdc@1e750000 {
 579                                 compatible = "aspeed,ast2600-sd-controller";
 580                                 reg = <0x1e750000 0x100>;
 581                                 #address-cells = <1>;
 582                                 #size-cells = <1>;
 583                                 ranges = <0 0x1e750000 0x10000>;
 584                                 clocks = <&syscon ASPEED_CLK_GATE_EMMCCLK>;
 585                                 status = "disabled";
 586
 587                                 emmc: sdhci@1e750100 {
 588                                         compatible = "aspeed,ast2600-sdhci";
 589                                         reg = <0x100 0x100>;
 590                                         sdhci,auto-cmd12;
 591                                         interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 592                                         clocks = <&syscon ASPEED_CLK_EMMC>;
 593                                         pinctrl-names = "default";
 594                                         pinctrl-0 = <&pinctrl_emmc_default>;
 595                                 };
 596                         };
 597
 598                         vuart1: serial@1e787000 {
 599                                 compatible = "aspeed,ast2500-vuart";
 600                                 reg = <0x1e787000 0x40>;
 601                                 reg-shift = <2>;
 602                                 interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 603                                 clocks = <&syscon ASPEED_CLK_APB1>;
 604                                 no-loopback-test;
 605                                 status = "disabled";
 606                         };
 607
 608                         vuart2: serial@1e788000 {
 609                                 compatible = "aspeed,ast2500-vuart";
 610                                 reg = <0x1e788000 0x40>;
 611                                 reg-shift = <2>;
 612                                 interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 613                                 clocks = <&syscon ASPEED_CLK_APB1>;
 614                                 no-loopback-test;
 615                                 status = "disabled";
 616                         };
 617
 618                         uart2: serial@1e78d000 {
 619                                 compatible = "ns16550a";
 620                                 reg = <0x1e78d000 0x20>;
 621                                 reg-shift = <2>;
 622                                 reg-io-width = <4>;
 623                                 interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 624                                 clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
 625                                 resets = <&lpc_reset 5>;
 626                                 no-loopback-test;
 627                                 pinctrl-names = "default";
 628                                 pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
 629                                 status = "disabled";
 630                         };
 631
 632                         uart3: serial@1e78e000 {
 633                                 compatible = "ns16550a";
 634                                 reg = <0x1e78e000 0x20>;
 635                                 reg-shift = <2>;
 636                                 reg-io-width = <4>;
 637                                 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 638                                 clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
 639                                 resets = <&lpc_reset 6>;
 640                                 no-loopback-test;
 641                                 pinctrl-names = "default";
 642                                 pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
 643                                 status = "disabled";
 644                         };
 645
 646                         uart4: serial@1e78f000 {
 647                                 compatible = "ns16550a";
 648                                 reg = <0x1e78f000 0x20>;
 649                                 reg-shift = <2>;
 650                                 reg-io-width = <4>;
 651                                 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 652                                 clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
 653                                 resets = <&lpc_reset 7>;
 654                                 no-loopback-test;
 655                                 pinctrl-names = "default";
 656                                 pinctrl-0 = <&pinctrl_txd4_default &pinctrl_rxd4_default>;
 657                                 status = "disabled";
 658                         };
 659
 660                         i2c: bus@1e78a000 {
 661                                 compatible = "simple-bus";
 662                                 #address-cells = <1>;
 663                                 #size-cells = <1>;
 664                                 ranges = <0 0x1e78a000 0x1000>;
 665                         };
 666
 667                         fsim0: fsi@1e79b000 {
 668                                 compatible = "aspeed,ast2600-fsi-master", "fsi-master";
 669                                 reg = <0x1e79b000 0x94>;
 670                                 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 671                                 pinctrl-names = "default";
 672                                 pinctrl-0 = <&pinctrl_fsi1_default>;
 673                                 clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
 674                                 status = "disabled";
 675                         };
 676
 677                         fsim1: fsi@1e79b100 {
 678                                 compatible = "aspeed,ast2600-fsi-master", "fsi-master";
 679                                 reg = <0x1e79b100 0x94>;
 680                                 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 681                                 pinctrl-names = "default";
 682                                 pinctrl-0 = <&pinctrl_fsi2_default>;
 683                                 clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
 684                                 status = "disabled";
 685                         };
 686                 };
 687         };
 688 };
 689
 690 #include "aspeed-g6-pinctrl.dtsi"
 691
 692 &i2c {
 693         i2c0: i2c-bus@80 {
 694                 #address-cells = <1>;
 695                 #size-cells = <0>;
 696                 #interrupt-cells = <1>;
 697                 reg = <0x80 0x80>;
 698                 compatible = "aspeed,ast2600-i2c-bus";
 699                 clocks = <&syscon ASPEED_CLK_APB2>;
 700                 resets = <&syscon ASPEED_RESET_I2C>;
 701                 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 702                 bus-frequency = <100000>;
 703                 pinctrl-names = "default";
 704                 pinctrl-0 = <&pinctrl_i2c1_default>;
 705                 status = "disabled";
 706         };
 707
 708         i2c1: i2c-bus@100 {
 709                 #address-cells = <1>;
 710                 #size-cells = <0>;
 711                 #interrupt-cells = <1>;
 712                 reg = <0x100 0x80>;
 713                 compatible = "aspeed,ast2600-i2c-bus";
 714                 clocks = <&syscon ASPEED_CLK_APB2>;
 715                 resets = <&syscon ASPEED_RESET_I2C>;
 716                 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 717                 bus-frequency = <100000>;
 718                 pinctrl-names = "default";
 719                 pinctrl-0 = <&pinctrl_i2c2_default>;
 720                 status = "disabled";
 721         };
 722
 723         i2c2: i2c-bus@180 {
 724                 #address-cells = <1>;
 725                 #size-cells = <0>;
 726                 #interrupt-cells = <1>;
 727                 reg = <0x180 0x80>;
 728                 compatible = "aspeed,ast2600-i2c-bus";
 729                 clocks = <&syscon ASPEED_CLK_APB2>;
 730                 resets = <&syscon ASPEED_RESET_I2C>;
 731                 interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 732                 bus-frequency = <100000>;
 733                 pinctrl-names = "default";
 734                 pinctrl-0 = <&pinctrl_i2c3_default>;
 735                 status = "disabled";
 736         };
 737
 738         i2c3: i2c-bus@200 {
 739                 #address-cells = <1>;
 740                 #size-cells = <0>;
 741                 #interrupt-cells = <1>;
 742                 reg = <0x200 0x80>;
 743                 compatible = "aspeed,ast2600-i2c-bus";
 744                 clocks = <&syscon ASPEED_CLK_APB2>;
 745                 resets = <&syscon ASPEED_RESET_I2C>;
 746                 interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 747                 bus-frequency = <100000>;
 748                 pinctrl-names = "default";
 749                 pinctrl-0 = <&pinctrl_i2c4_default>;
 750                 status = "disabled";
 751         };
 752
 753         i2c4: i2c-bus@280 {
 754                 #address-cells = <1>;
 755                 #size-cells = <0>;
 756                 #interrupt-cells = <1>;
 757                 reg = <0x280 0x80>;
 758                 compatible = "aspeed,ast2600-i2c-bus";
 759                 clocks = <&syscon ASPEED_CLK_APB2>;
 760                 resets = <&syscon ASPEED_RESET_I2C>;
 761                 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 762                 bus-frequency = <100000>;
 763                 pinctrl-names = "default";
 764                 pinctrl-0 = <&pinctrl_i2c5_default>;
 765                 status = "disabled";
 766         };
 767
 768         i2c5: i2c-bus@300 {
 769                 #address-cells = <1>;
 770                 #size-cells = <0>;
 771                 #interrupt-cells = <1>;
 772                 reg = <0x300 0x80>;
 773                 compatible = "aspeed,ast2600-i2c-bus";
 774                 clocks = <&syscon ASPEED_CLK_APB2>;
 775                 resets = <&syscon ASPEED_RESET_I2C>;
 776                 interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 777                 bus-frequency = <100000>;
 778                 pinctrl-names = "default";
 779                 pinctrl-0 = <&pinctrl_i2c6_default>;
 780                 status = "disabled";
 781         };
 782
 783         i2c6: i2c-bus@380 {
 784                 #address-cells = <1>;
 785                 #size-cells = <0>;
 786                 #interrupt-cells = <1>;
 787                 reg = <0x380 0x80>;
 788                 compatible = "aspeed,ast2600-i2c-bus";
 789                 clocks = <&syscon ASPEED_CLK_APB2>;
 790                 resets = <&syscon ASPEED_RESET_I2C>;
 791                 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 792                 bus-frequency = <100000>;
 793                 pinctrl-names = "default";
 794                 pinctrl-0 = <&pinctrl_i2c7_default>;
 795                 status = "disabled";
 796         };
 797
 798         i2c7: i2c-bus@400 {
 799                 #address-cells = <1>;
 800                 #size-cells = <0>;
 801                 #interrupt-cells = <1>;
 802                 reg = <0x400 0x80>;
 803                 compatible = "aspeed,ast2600-i2c-bus";
 804                 clocks = <&syscon ASPEED_CLK_APB2>;
 805                 resets = <&syscon ASPEED_RESET_I2C>;
 806                 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 807                 bus-frequency = <100000>;
 808                 pinctrl-names = "default";
 809                 pinctrl-0 = <&pinctrl_i2c8_default>;
 810                 status = "disabled";
 811         };
 812
 813         i2c8: i2c-bus@480 {
 814                 #address-cells = <1>;
 815                 #size-cells = <0>;
 816                 #interrupt-cells = <1>;
 817                 reg = <0x480 0x80>;
 818                 compatible = "aspeed,ast2600-i2c-bus";
 819                 clocks = <&syscon ASPEED_CLK_APB2>;
 820                 resets = <&syscon ASPEED_RESET_I2C>;
 821                 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 822                 bus-frequency = <100000>;
 823                 pinctrl-names = "default";
 824                 pinctrl-0 = <&pinctrl_i2c9_default>;
 825                 status = "disabled";
 826         };
 827
 828         i2c9: i2c-bus@500 {
 829                 #address-cells = <1>;
 830                 #size-cells = <0>;
 831                 #interrupt-cells = <1>;
 832                 reg = <0x500 0x80>;
 833                 compatible = "aspeed,ast2600-i2c-bus";
 834                 clocks = <&syscon ASPEED_CLK_APB2>;
 835                 resets = <&syscon ASPEED_RESET_I2C>;
 836                 interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 837                 bus-frequency = <100000>;
 838                 pinctrl-names = "default";
 839                 pinctrl-0 = <&pinctrl_i2c10_default>;
 840                 status = "disabled";
 841         };
 842
 843         i2c10: i2c-bus@580 {
 844                 #address-cells = <1>;
 845                 #size-cells = <0>;
 846                 #interrupt-cells = <1>;
 847                 reg = <0x580 0x80>;
 848                 compatible = "aspeed,ast2600-i2c-bus";
 849                 clocks = <&syscon ASPEED_CLK_APB2>;
 850                 resets = <&syscon ASPEED_RESET_I2C>;
 851                 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 852                 bus-frequency = <100000>;
 853                 pinctrl-names = "default";
 854                 pinctrl-0 = <&pinctrl_i2c11_default>;
 855                 status = "disabled";
 856         };
 857
 858         i2c11: i2c-bus@600 {
 859                 #address-cells = <1>;
 860                 #size-cells = <0>;
 861                 #interrupt-cells = <1>;
 862                 reg = <0x600 0x80>;
 863                 compatible = "aspeed,ast2600-i2c-bus";
 864                 clocks = <&syscon ASPEED_CLK_APB2>;
 865                 resets = <&syscon ASPEED_RESET_I2C>;
 866                 interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 867                 bus-frequency = <100000>;
 868                 pinctrl-names = "default";
 869                 pinctrl-0 = <&pinctrl_i2c12_default>;
 870                 status = "disabled";
 871         };
 872
 873         i2c12: i2c-bus@680 {
 874                 #address-cells = <1>;
 875                 #size-cells = <0>;
 876                 #interrupt-cells = <1>;
 877                 reg = <0x680 0x80>;
 878                 compatible = "aspeed,ast2600-i2c-bus";
 879                 clocks = <&syscon ASPEED_CLK_APB2>;
 880                 resets = <&syscon ASPEED_RESET_I2C>;
 881                 interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
 882                 bus-frequency = <100000>;
 883                 pinctrl-names = "default";
 884                 pinctrl-0 = <&pinctrl_i2c13_default>;
 885                 status = "disabled";
 886         };
 887
 888         i2c13: i2c-bus@700 {
 889                 #address-cells = <1>;
 890                 #size-cells = <0>;
 891                 #interrupt-cells = <1>;
 892                 reg = <0x700 0x80>;
 893                 compatible = "aspeed,ast2600-i2c-bus";
 894                 clocks = <&syscon ASPEED_CLK_APB2>;
 895                 resets = <&syscon ASPEED_RESET_I2C>;
 896                 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 897                 bus-frequency = <100000>;
 898                 pinctrl-names = "default";
 899                 pinctrl-0 = <&pinctrl_i2c14_default>;
 900                 status = "disabled";
 901         };
 902
 903         i2c14: i2c-bus@780 {
 904                 #address-cells = <1>;
 905                 #size-cells = <0>;
 906                 #interrupt-cells = <1>;
 907                 reg = <0x780 0x80>;
 908                 compatible = "aspeed,ast2600-i2c-bus";
 909                 clocks = <&syscon ASPEED_CLK_APB2>;
 910                 resets = <&syscon ASPEED_RESET_I2C>;
 911                 interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 912                 bus-frequency = <100000>;
 913                 pinctrl-names = "default";
 914                 pinctrl-0 = <&pinctrl_i2c15_default>;
 915                 status = "disabled";
 916         };
 917
 918         i2c15: i2c-bus@800 {
 919                 #address-cells = <1>;
 920                 #size-cells = <0>;
 921                 #interrupt-cells = <1>;
 922                 reg = <0x800 0x80>;
 923                 compatible = "aspeed,ast2600-i2c-bus";
 924                 clocks = <&syscon ASPEED_CLK_APB2>;
 925                 resets = <&syscon ASPEED_RESET_I2C>;
 926                 interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
 927                 bus-frequency = <100000>;
 928                 pinctrl-names = "default";
 929                 pinctrl-0 = <&pinctrl_i2c16_default>;
 930                 status = "disabled";
 931         };
 932 };