arch/arm/boot/dts/am4372.dtsi

   1 /*
   2  * Device Tree Source for AM4372 SoC
   3  *
   4  * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
   5  *
   6  * This file is licensed under the terms of the GNU General Public License
   7  * version 2.  This program is licensed "as is" without any warranty of any
   8  * kind, whether express or implied.
   9  */
  10
  11 #include <dt-bindings/bus/ti-sysc.h>
  12 #include <dt-bindings/gpio/gpio.h>
  13 #include <dt-bindings/interrupt-controller/arm-gic.h>
  14 #include <dt-bindings/clock/am4.h>
  15
  16 / {
  17         compatible = "ti,am4372", "ti,am43";
  18         interrupt-parent = <&wakeupgen>;
  19         #address-cells = <1>;
  20         #size-cells = <1>;
  21         chosen { };
  22
  23         memory@0 {
  24                 device_type = "memory";
  25                 reg = <0 0>;
  26         };
  27
  28         aliases {
  29                 i2c0 = &i2c0;
  30                 i2c1 = &i2c1;
  31                 i2c2 = &i2c2;
  32                 serial0 = &uart0;
  33                 serial1 = &uart1;
  34                 serial2 = &uart2;
  35                 serial3 = &uart3;
  36                 serial4 = &uart4;
  37                 serial5 = &uart5;
  38                 ethernet0 = &cpsw_port1;
  39                 ethernet1 = &cpsw_port2;
  40                 spi0 = &qspi;
  41         };
  42
  43         cpus {
  44                 #address-cells = <1>;
  45                 #size-cells = <0>;
  46                 cpu: cpu@0 {
  47                         compatible = "arm,cortex-a9";
  48                         enable-method = "ti,am4372";
  49                         device_type = "cpu";
  50                         reg = <0>;
  51
  52                         clocks = <&dpll_mpu_ck>;
  53                         clock-names = "cpu";
  54
  55                         operating-points-v2 = <&cpu0_opp_table>;
  56
  57                         clock-latency = <300000>; /* From omap-cpufreq driver */
  58                         cpu-idle-states = <&mpu_gate>;
  59                 };
  60
  61                 idle-states {
  62                         mpu_gate: mpu_gate {
  63                                 compatible = "arm,idle-state";
  64                                 entry-latency-us = <40>;
  65                                 exit-latency-us = <100>;
  66                                 min-residency-us = <300>;
  67                                 local-timer-stop;
  68                         };
  69                 };
  70         };
  71
  72         cpu0_opp_table: opp-table {
  73                 compatible = "operating-points-v2-ti-cpu";
  74                 syscon = <&scm_conf>;
  75
  76                 opp50-300000000 {
  77                         opp-hz = /bits/ 64 <300000000>;
  78                         opp-microvolt = <950000 931000 969000>;
  79                         opp-supported-hw = <0xFF 0x01>;
  80                         opp-suspend;
  81                 };
  82
  83                 opp100-600000000 {
  84                         opp-hz = /bits/ 64 <600000000>;
  85                         opp-microvolt = <1100000 1078000 1122000>;
  86                         opp-supported-hw = <0xFF 0x04>;
  87                 };
  88
  89                 opp120-720000000 {
  90                         opp-hz = /bits/ 64 <720000000>;
  91                         opp-microvolt = <1200000 1176000 1224000>;
  92                         opp-supported-hw = <0xFF 0x08>;
  93                 };
  94
  95                 oppturbo-800000000 {
  96                         opp-hz = /bits/ 64 <800000000>;
  97                         opp-microvolt = <1260000 1234800 1285200>;
  98                         opp-supported-hw = <0xFF 0x10>;
  99                 };
 100
 101                 oppnitro-1000000000 {
 102                         opp-hz = /bits/ 64 <1000000000>;
 103                         opp-microvolt = <1325000 1298500 1351500>;
 104                         opp-supported-hw = <0xFF 0x20>;
 105                 };
 106         };
 107
 108         soc {
 109                 compatible = "ti,omap-infra";
 110         };
 111
 112         gic: interrupt-controller@48241000 {
 113                 compatible = "arm,cortex-a9-gic";
 114                 interrupt-controller;
 115                 #interrupt-cells = <3>;
 116                 reg = <0x48241000 0x1000>,
 117                       <0x48240100 0x0100>;
 118                 interrupt-parent = <&gic>;
 119         };
 120
 121         wakeupgen: interrupt-controller@48281000 {
 122                 compatible = "ti,omap4-wugen-mpu";
 123                 interrupt-controller;
 124                 #interrupt-cells = <3>;
 125                 reg = <0x48281000 0x1000>;
 126                 interrupt-parent = <&gic>;
 127         };
 128
 129         scu: scu@48240000 {
 130                 compatible = "arm,cortex-a9-scu";
 131                 reg = <0x48240000 0x100>;
 132         };
 133
 134         global_timer: timer@48240200 {
 135                 compatible = "arm,cortex-a9-global-timer";
 136                 reg = <0x48240200 0x100>;
 137                 interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 138                 interrupt-parent = <&gic>;
 139                 clocks = <&mpu_periphclk>;
 140         };
 141
 142         local_timer: timer@48240600 {
 143                 compatible = "arm,cortex-a9-twd-timer";
 144                 reg = <0x48240600 0x100>;
 145                 interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
 146                 interrupt-parent = <&gic>;
 147                 clocks = <&mpu_periphclk>;
 148         };
 149
 150         cache-controller@48242000 {
 151                 compatible = "arm,pl310-cache";
 152                 reg = <0x48242000 0x1000>;
 153                 cache-unified;
 154                 cache-level = <2>;
 155         };
 156
 157         ocp@44000000 {
 158                 compatible = "simple-pm-bus";
 159                 power-domains = <&prm_per>;
 160                 clocks = <&l3_clkctrl AM4_L3_L3_MAIN_CLKCTRL 0>;
 161                 clock-names = "fck";
 162                 #address-cells = <1>;
 163                 #size-cells = <1>;
 164                 ranges;
 165                 ti,no-idle;
 166
 167                 l3-noc@44000000 {
 168                         compatible = "ti,am4372-l3-noc";
 169                         reg = <0x44000000 0x400000>,
 170                               <0x44800000 0x400000>;
 171                         interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 172                                      <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 173                 };
 174
 175                 l4_wkup: interconnect@44c00000 {
 176                 };
 177                 l4_per: interconnect@48000000 {
 178                 };
 179                 l4_fast: interconnect@4a000000 {
 180                 };
 181
 182                 target-module@4c000000 {
 183                         compatible = "ti,sysc-omap4-simple", "ti,sysc";
 184                         reg = <0x4c000000 0x4>;
 185                         reg-names = "rev";
 186                         clocks = <&emif_clkctrl AM4_EMIF_EMIF_CLKCTRL 0>;
 187                         clock-names = "fck";
 188                         ti,no-idle;
 189                         #address-cells = <1>;
 190                         #size-cells = <1>;
 191                         ranges = <0x0 0x4c000000 0x1000000>;
 192
 193                         emif: emif@0 {
 194                                 compatible = "ti,emif-am4372";
 195                                 reg = <0 0x1000000>;
 196                                 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 197                                 sram = <&pm_sram_code
 198                                         &pm_sram_data>;
 199                         };
 200                 };
 201
 202                 target-module@49000000 {
 203                         compatible = "ti,sysc-omap4", "ti,sysc";
 204                         reg = <0x49000000 0x4>;
 205                         reg-names = "rev";
 206                         clocks = <&l3_clkctrl AM4_L3_TPCC_CLKCTRL 0>;
 207                         clock-names = "fck";
 208                         #address-cells = <1>;
 209                         #size-cells = <1>;
 210                         ranges = <0x0 0x49000000 0x10000>;
 211
 212                         edma: dma@0 {
 213                                 compatible = "ti,edma3-tpcc";
 214                                 reg = <0 0x10000>;
 215                                 reg-names = "edma3_cc";
 216                                 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 217                                              <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 218                                              <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 219                                 interrupt-names = "edma3_ccint", "edma3_mperr",
 220                                                   "edma3_ccerrint";
 221                                 dma-requests = <64>;
 222                                 #dma-cells = <2>;
 223
 224                                 ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
 225                                            <&edma_tptc2 0>;
 226
 227                                 ti,edma-memcpy-channels = <58 59>;
 228                         };
 229                 };
 230
 231                 target-module@49800000 {
 232                         compatible = "ti,sysc-omap4", "ti,sysc";
 233                         reg = <0x49800000 0x4>,
 234                               <0x49800010 0x4>;
 235                         reg-names = "rev", "sysc";
 236                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 237                         ti,sysc-midle = <SYSC_IDLE_FORCE>;
 238                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 239                                         <SYSC_IDLE_SMART>;
 240                         clocks = <&l3_clkctrl AM4_L3_TPTC0_CLKCTRL 0>;
 241                         clock-names = "fck";
 242                         #address-cells = <1>;
 243                         #size-cells = <1>;
 244                         ranges = <0x0 0x49800000 0x100000>;
 245
 246                         edma_tptc0: dma@0 {
 247                                 compatible = "ti,edma3-tptc";
 248                                 reg = <0 0x100000>;
 249                                 interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 250                                 interrupt-names = "edma3_tcerrint";
 251                         };
 252                 };
 253
 254                 target-module@49900000 {
 255                         compatible = "ti,sysc-omap4", "ti,sysc";
 256                         reg = <0x49900000 0x4>,
 257                               <0x49900010 0x4>;
 258                         reg-names = "rev", "sysc";
 259                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 260                         ti,sysc-midle = <SYSC_IDLE_FORCE>;
 261                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 262                                         <SYSC_IDLE_SMART>;
 263                         clocks = <&l3_clkctrl AM4_L3_TPTC1_CLKCTRL 0>;
 264                         clock-names = "fck";
 265                         #address-cells = <1>;
 266                         #size-cells = <1>;
 267                         ranges = <0x0 0x49900000 0x100000>;
 268
 269                         edma_tptc1: dma@0 {
 270                                 compatible = "ti,edma3-tptc";
 271                                 reg = <0 0x100000>;
 272                                 interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 273                                 interrupt-names = "edma3_tcerrint";
 274                         };
 275                 };
 276
 277                 target-module@49a00000 {
 278                         compatible = "ti,sysc-omap4", "ti,sysc";
 279                         reg = <0x49a00000 0x4>,
 280                               <0x49a00010 0x4>;
 281                         reg-names = "rev", "sysc";
 282                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 283                         ti,sysc-midle = <SYSC_IDLE_FORCE>;
 284                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 285                                         <SYSC_IDLE_SMART>;
 286                         clocks = <&l3_clkctrl AM4_L3_TPTC2_CLKCTRL 0>;
 287                         clock-names = "fck";
 288                         #address-cells = <1>;
 289                         #size-cells = <1>;
 290                         ranges = <0x0 0x49a00000 0x100000>;
 291
 292                         edma_tptc2: dma@0 {
 293                                 compatible = "ti,edma3-tptc";
 294                                 reg = <0 0x100000>;
 295                                 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 296                                 interrupt-names = "edma3_tcerrint";
 297                         };
 298                 };
 299
 300                 target-module@47810000 {
 301                         compatible = "ti,sysc-omap2", "ti,sysc";
 302                         reg = <0x478102fc 0x4>,
 303                               <0x47810110 0x4>,
 304                               <0x47810114 0x4>;
 305                         reg-names = "rev", "sysc", "syss";
 306                         ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
 307                                          SYSC_OMAP2_ENAWAKEUP |
 308                                          SYSC_OMAP2_SOFTRESET |
 309                                          SYSC_OMAP2_AUTOIDLE)>;
 310                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 311                                         <SYSC_IDLE_NO>,
 312                                         <SYSC_IDLE_SMART>;
 313                         ti,syss-mask = <1>;
 314                         clocks = <&l3s_clkctrl AM4_L3S_MMC3_CLKCTRL 0>;
 315                         clock-names = "fck";
 316                         #address-cells = <1>;
 317                         #size-cells = <1>;
 318                         ranges = <0x0 0x47810000 0x1000>;
 319
 320                         mmc3: mmc@0 {
 321                                 compatible = "ti,am437-sdhci";
 322                                 ti,needs-special-reset;
 323                                 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 324                                 reg = <0x0 0x1000>;
 325                                 status = "disabled";
 326                         };
 327                 };
 328
 329                 sham_target: target-module@53100000 {
 330                         compatible = "ti,sysc-omap3-sham", "ti,sysc";
 331                         reg = <0x53100100 0x4>,
 332                               <0x53100110 0x4>,
 333                               <0x53100114 0x4>;
 334                         reg-names = "rev", "sysc", "syss";
 335                         ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
 336                                          SYSC_OMAP2_AUTOIDLE)>;
 337                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 338                                         <SYSC_IDLE_NO>,
 339                                         <SYSC_IDLE_SMART>;
 340                         ti,syss-mask = <1>;
 341                         /* Domains (P, C): per_pwrdm, l3_clkdm */
 342                         clocks = <&l3_clkctrl AM4_L3_SHAM_CLKCTRL 0>;
 343                         clock-names = "fck";
 344                         #address-cells = <1>;
 345                         #size-cells = <1>;
 346                         ranges = <0x0 0x53100000 0x1000>;
 347
 348                         sham: sham@0 {
 349                                 compatible = "ti,omap5-sham";
 350                                 reg = <0 0x300>;
 351                                 dmas = <&edma 36 0>;
 352                                 dma-names = "rx";
 353                                 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 354                         };
 355                 };
 356
 357                 aes_target: target-module@53501000 {
 358                         compatible = "ti,sysc-omap2", "ti,sysc";
 359                         reg = <0x53501080 0x4>,
 360                               <0x53501084 0x4>,
 361                               <0x53501088 0x4>;
 362                         reg-names = "rev", "sysc", "syss";
 363                         ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
 364                                          SYSC_OMAP2_AUTOIDLE)>;
 365                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 366                                         <SYSC_IDLE_NO>,
 367                                         <SYSC_IDLE_SMART>,
 368                                         <SYSC_IDLE_SMART_WKUP>;
 369                         ti,syss-mask = <1>;
 370                         /* Domains (P, C): per_pwrdm, l3_clkdm */
 371                         clocks = <&l3_clkctrl AM4_L3_AES_CLKCTRL 0>;
 372                         clock-names = "fck";
 373                         #address-cells = <1>;
 374                         #size-cells = <1>;
 375                         ranges = <0x0 0x53501000 0x1000>;
 376
 377                         aes: aes@0 {
 378                                 compatible = "ti,omap4-aes";
 379                                 reg = <0 0xa0>;
 380                                 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 381                                 dmas = <&edma 6 0>,
 382                                       <&edma 5 0>;
 383                                 dma-names = "tx", "rx";
 384                         };
 385                 };
 386
 387                 des_target: target-module@53701000 {
 388                         compatible = "ti,sysc-omap2", "ti,sysc";
 389                         reg = <0x53701030 0x4>,
 390                               <0x53701034 0x4>,
 391                               <0x53701038 0x4>;
 392                         reg-names = "rev", "sysc", "syss";
 393                         ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
 394                                          SYSC_OMAP2_AUTOIDLE)>;
 395                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 396                                         <SYSC_IDLE_NO>,
 397                                         <SYSC_IDLE_SMART>,
 398                                         <SYSC_IDLE_SMART_WKUP>;
 399                         ti,syss-mask = <1>;
 400                         /* Domains (P, C): per_pwrdm, l3_clkdm */
 401                         clocks = <&l3_clkctrl AM4_L3_DES_CLKCTRL 0>;
 402                         clock-names = "fck";
 403                         #address-cells = <1>;
 404                         #size-cells = <1>;
 405                         ranges = <0 0x53701000 0x1000>;
 406
 407                         des: des@0 {
 408                                 compatible = "ti,omap4-des";
 409                                 reg = <0 0xa0>;
 410                                 interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
 411                                 dmas = <&edma 34 0>,
 412                                        <&edma 33 0>;
 413                                 dma-names = "tx", "rx";
 414                         };
 415                 };
 416
 417                 pruss_tm: target-module@54400000 {
 418                         compatible = "ti,sysc-pruss", "ti,sysc";
 419                         reg = <0x54426000 0x4>,
 420                               <0x54426004 0x4>;
 421                         reg-names = "rev", "sysc";
 422                         ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
 423                                          SYSC_PRUSS_SUB_MWAIT)>;
 424                         ti,sysc-midle = <SYSC_IDLE_FORCE>,
 425                                         <SYSC_IDLE_NO>,
 426                                         <SYSC_IDLE_SMART>;
 427                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 428                                         <SYSC_IDLE_NO>,
 429                                         <SYSC_IDLE_SMART>;
 430                         clocks = <&pruss_ocp_clkctrl AM4_PRUSS_OCP_PRUSS_CLKCTRL 0>;
 431                         clock-names = "fck";
 432                         resets = <&prm_per 1>;
 433                         reset-names = "rstctrl";
 434                         #address-cells = <1>;
 435                         #size-cells = <1>;
 436                         ranges = <0x0 0x54400000 0x80000>;
 437
 438                         pruss1: pruss@0 {
 439                                 compatible = "ti,am4376-pruss1";
 440                                 reg = <0x0 0x40000>;
 441                                 #address-cells = <1>;
 442                                 #size-cells = <1>;
 443                                 ranges;
 444
 445                                 pruss1_mem: memories@0 {
 446                                         reg = <0x0 0x2000>,
 447                                               <0x2000 0x2000>,
 448                                               <0x10000 0x8000>;
 449                                         reg-names = "dram0", "dram1",
 450                                                     "shrdram2";
 451                                 };
 452
 453                                 pruss1_cfg: cfg@26000 {
 454                                         compatible = "ti,pruss-cfg", "syscon";
 455                                         reg = <0x26000 0x2000>;
 456                                         #address-cells = <1>;
 457                                         #size-cells = <1>;
 458                                         ranges = <0x0 0x26000 0x2000>;
 459
 460                                         clocks {
 461                                                 #address-cells = <1>;
 462                                                 #size-cells = <0>;
 463
 464                                                 pruss1_iepclk_mux: iepclk-mux@30 {
 465                                                         reg = <0x30>;
 466                                                         #clock-cells = <0>;
 467                                                         clocks = <&sysclk_div>,     /* icss_iep_gclk */
 468                                                                  <&pruss_ocp_gclk>; /* icss_ocp_gclk */
 469                                                 };
 470                                         };
 471                                 };
 472
 473                                 pruss1_mii_rt: mii-rt@32000 {
 474                                         compatible = "ti,pruss-mii", "syscon";
 475                                         reg = <0x32000 0x58>;
 476                                 };
 477
 478                                 pruss1_intc: interrupt-controller@20000 {
 479                                         compatible = "ti,pruss-intc";
 480                                         reg = <0x20000 0x2000>;
 481                                         interrupt-controller;
 482                                         #interrupt-cells = <3>;
 483                                         interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
 484                                                      <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
 485                                                      <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
 486                                                      <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
 487                                                      <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
 488                                                      <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
 489                                                      <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 490                                         interrupt-names = "host_intr0", "host_intr1",
 491                                                           "host_intr2", "host_intr3",
 492                                                           "host_intr4",
 493                                                           "host_intr6", "host_intr7";
 494                                         ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */
 495                                 };
 496
 497                                 pru1_0: pru@34000 {
 498                                         compatible = "ti,am4376-pru";
 499                                         reg = <0x34000 0x3000>,
 500                                               <0x22000 0x400>,
 501                                               <0x22400 0x100>;
 502                                         reg-names = "iram", "control", "debug";
 503                                         firmware-name = "am437x-pru1_0-fw";
 504                                 };
 505
 506                                 pru1_1: pru@38000 {
 507                                         compatible = "ti,am4376-pru";
 508                                         reg = <0x38000 0x3000>,
 509                                               <0x24000 0x400>,
 510                                               <0x24400 0x100>;
 511                                         reg-names = "iram", "control", "debug";
 512                                         firmware-name = "am437x-pru1_1-fw";
 513                                 };
 514
 515                                 pruss1_mdio: mdio@32400 {
 516                                         compatible = "ti,davinci_mdio";
 517                                         reg = <0x32400 0x90>;
 518                                         clocks = <&dpll_core_m4_ck>;
 519                                         clock-names = "fck";
 520                                         bus_freq = <1000000>;
 521                                         #address-cells = <1>;
 522                                         #size-cells = <0>;
 523                                 };
 524                         };
 525
 526                         pruss0: pruss@40000 {
 527                                 compatible = "ti,am4376-pruss0";
 528                                 reg = <0x40000 0x40000>;
 529                                 #address-cells = <1>;
 530                                 #size-cells = <1>;
 531                                 ranges;
 532
 533                                 pruss0_mem: memories@40000 {
 534                                         reg = <0x40000 0x1000>,
 535                                               <0x42000 0x1000>;
 536                                         reg-names = "dram0", "dram1";
 537                                 };
 538
 539                                 pruss0_cfg: cfg@66000 {
 540                                         compatible = "ti,pruss-cfg", "syscon";
 541                                         reg = <0x66000 0x2000>;
 542                                         #address-cells = <1>;
 543                                         #size-cells = <1>;
 544                                         ranges = <0x0 0x66000 0x2000>;
 545
 546                                         clocks {
 547                                                 #address-cells = <1>;
 548                                                 #size-cells = <0>;
 549
 550                                                 pruss0_iepclk_mux: iepclk-mux@30 {
 551                                                         reg = <0x30>;
 552                                                         #clock-cells = <0>;
 553                                                         clocks = <&sysclk_div>,     /* icss_iep_gclk */
 554                                                                  <&pruss_ocp_gclk>; /* icss_ocp_gclk */
 555                                                 };
 556                                         };
 557                                 };
 558
 559                                 pruss0_mii_rt: mii-rt@72000 {
 560                                         compatible = "ti,pruss-mii", "syscon";
 561                                         reg = <0x72000 0x58>;
 562                                         status = "disabled";
 563                                 };
 564
 565                                 pruss0_intc: interrupt-controller@60000 {
 566                                         compatible = "ti,pruss-intc";
 567                                         reg = <0x60000 0x2000>;
 568                                         interrupt-controller;
 569                                         #interrupt-cells = <3>;
 570                                         interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
 571                                                      <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
 572                                                      <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
 573                                                      <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
 574                                                      <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
 575                                                      <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
 576                                                      <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 577                                         interrupt-names = "host_intr0", "host_intr1",
 578                                                           "host_intr2", "host_intr3",
 579                                                           "host_intr4",
 580                                                           "host_intr6", "host_intr7";
 581                                         ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */
 582                                 };
 583
 584                                 pru0_0: pru@74000 {
 585                                         compatible = "ti,am4376-pru";
 586                                         reg = <0x74000 0x1000>,
 587                                               <0x62000 0x400>,
 588                                               <0x62400 0x100>;
 589                                         reg-names = "iram", "control", "debug";
 590                                         firmware-name = "am437x-pru0_0-fw";
 591                                 };
 592
 593                                 pru0_1: pru@78000 {
 594                                         compatible = "ti,am4376-pru";
 595                                         reg = <0x78000 0x1000>,
 596                                               <0x64000 0x400>,
 597                                               <0x64400 0x100>;
 598                                         reg-names = "iram", "control", "debug";
 599                                         firmware-name = "am437x-pru0_1-fw";
 600                                 };
 601                         };
 602                 };
 603
 604                 target-module@50000000 {
 605                         compatible = "ti,sysc-omap2", "ti,sysc";
 606                         reg = <0x50000000 4>,
 607                               <0x50000010 4>,
 608                               <0x50000014 4>;
 609                         reg-names = "rev", "sysc", "syss";
 610                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 611                                         <SYSC_IDLE_NO>,
 612                                         <SYSC_IDLE_SMART>;
 613                         ti,syss-mask = <1>;
 614                         clocks = <&l3s_clkctrl AM4_L3S_GPMC_CLKCTRL 0>;
 615                         clock-names = "fck";
 616                         #address-cells = <1>;
 617                         #size-cells = <1>;
 618                         ranges = <0x50000000 0x50000000 0x00001000>, /* regs */
 619                                  <0x00000000 0x00000000 0x40000000>; /* data */
 620
 621                         gpmc: gpmc@50000000 {
 622                                 compatible = "ti,am3352-gpmc";
 623                                 dmas = <&edma 52 0>;
 624                                 dma-names = "rxtx";
 625                                 clocks = <&l3s_gclk>;
 626                                 clock-names = "fck";
 627                                 reg = <0x50000000 0x2000>;
 628                                 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 629                                 gpmc,num-cs = <7>;
 630                                 gpmc,num-waitpins = <2>;
 631                                 #address-cells = <2>;
 632                                 #size-cells = <1>;
 633                                 interrupt-controller;
 634                                 #interrupt-cells = <2>;
 635                                 gpio-controller;
 636                                 #gpio-cells = <2>;
 637                                 status = "disabled";
 638                         };
 639                 };
 640
 641                 target-module@47900000 {
 642                         compatible = "ti,sysc-omap4", "ti,sysc";
 643                         reg = <0x47900000 0x4>,
 644                               <0x47900010 0x4>;
 645                         reg-names = "rev", "sysc";
 646                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 647                                         <SYSC_IDLE_NO>,
 648                                         <SYSC_IDLE_SMART>,
 649                                         <SYSC_IDLE_SMART_WKUP>;
 650                         clocks = <&l3s_clkctrl AM4_L3S_QSPI_CLKCTRL 0>;
 651                         clock-names = "fck";
 652                         #address-cells = <1>;
 653                         #size-cells = <1>;
 654                         ranges = <0x0 0x47900000 0x1000>,
 655                                  <0x30000000 0x30000000 0x4000000>;
 656
 657                         qspi: spi@0 {
 658                                 compatible = "ti,am4372-qspi";
 659                                 reg = <0 0x100>,
 660                                       <0x30000000 0x4000000>;
 661                                 reg-names = "qspi_base", "qspi_mmap";
 662                                 clocks = <&dpll_per_m2_div4_ck>;
 663                                 clock-names = "fck";
 664                                 #address-cells = <1>;
 665                                 #size-cells = <0>;
 666                                 interrupts = <0 138 0x4>;
 667                                 num-cs = <4>;
 668                         };
 669                 };
 670
 671                 target-module@40300000 {
 672                         compatible = "ti,sysc-omap4-simple", "ti,sysc";
 673                         clocks = <&l3_clkctrl AM4_L3_OCMCRAM_CLKCTRL 0>;
 674                         clock-names = "fck";
 675                         ti,no-idle;
 676                         #address-cells = <1>;
 677                         #size-cells = <1>;
 678                         ranges = <0 0x40300000 0x40000>;
 679
 680                         ocmcram: sram@0 {
 681                                 compatible = "mmio-sram";
 682                                 reg = <0 0x40000>; /* 256k */
 683                                 ranges = <0 0 0x40000>;
 684                                 #address-cells = <1>;
 685                                 #size-cells = <1>;
 686
 687                                 pm_sram_code: pm-code-sram@0 {
 688                                         compatible = "ti,sram";
 689                                         reg = <0x0 0x1000>;
 690                                         protect-exec;
 691                                 };
 692
 693                                 pm_sram_data: pm-data-sram@1000 {
 694                                         compatible = "ti,sram";
 695                                         reg = <0x1000 0x1000>;
 696                                         pool;
 697                                 };
 698                         };
 699                 };
 700
 701                 target-module@56000000 {
 702                         compatible = "ti,sysc-omap4", "ti,sysc";
 703                         reg = <0x5600fe00 0x4>,
 704                               <0x5600fe10 0x4>;
 705                         reg-names = "rev", "sysc";
 706                         ti,sysc-midle = <SYSC_IDLE_FORCE>,
 707                                         <SYSC_IDLE_NO>,
 708                                         <SYSC_IDLE_SMART>;
 709                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 710                                         <SYSC_IDLE_NO>,
 711                                         <SYSC_IDLE_SMART>;
 712                         clocks = <&gfx_l3_clkctrl AM4_GFX_L3_GFX_CLKCTRL 0>;
 713                         clock-names = "fck";
 714                         power-domains = <&prm_gfx>;
 715                         resets = <&prm_gfx 0>;
 716                         reset-names = "rstctrl";
 717                         #address-cells = <1>;
 718                         #size-cells = <1>;
 719                         ranges = <0 0x56000000 0x1000000>;
 720                 };
 721         };
 722 };
 723
 724 #include "am437x-l4.dtsi"
 725 #include "am43xx-clocks.dtsi"
 726
 727 &prcm {
 728         prm_mpu: prm@300 {
 729                 compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
 730                 reg = <0x300 0x100>;
 731                 #power-domain-cells = <0>;
 732         };
 733
 734         prm_gfx: prm@400 {
 735                 compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
 736                 reg = <0x400 0x100>;
 737                 #power-domain-cells = <0>;
 738                 #reset-cells = <1>;
 739         };
 740
 741         prm_rtc: prm@500 {
 742                 compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
 743                 reg = <0x500 0x100>;
 744                 #power-domain-cells = <0>;
 745         };
 746
 747         prm_tamper: prm@600 {
 748                 compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
 749                 reg = <0x600 0x100>;
 750                 #power-domain-cells = <0>;
 751         };
 752
 753         prm_cefuse: prm@700 {
 754                 compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
 755                 reg = <0x700 0x100>;
 756                 #power-domain-cells = <0>;
 757         };
 758
 759         prm_per: prm@800 {
 760                 compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
 761                 reg = <0x800 0x100>;
 762                 #reset-cells = <1>;
 763                 #power-domain-cells = <0>;
 764         };
 765
 766         prm_wkup: prm@2000 {
 767                 compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
 768                 reg = <0x2000 0x100>;
 769                 #reset-cells = <1>;
 770                 #power-domain-cells = <0>;
 771         };
 772
 773         prm_device: prm@4000 {
 774                 compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
 775                 reg = <0x4000 0x100>;
 776                 #reset-cells = <1>;
 777         };
 778 };
 779
 780 /* Preferred always-on timer for clocksource */
 781 &timer1_target {
 782         ti,no-reset-on-init;
 783         ti,no-idle;
 784         clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_TIMER1_CLKCTRL 0>,
 785                  <&l4_wkup_clkctrl AM4_L4_WKUP_L4_WKUP_CLKCTRL 0>;
 786         clock-names = "fck", "ick";
 787         timer@0 {
 788                 assigned-clocks = <&timer1_fck>;
 789                 assigned-clock-parents = <&sys_clkin_ck>;
 790         };
 791 };
 792
 793 /* Preferred timer for clockevent */
 794 &timer2_target {
 795         ti,no-reset-on-init;
 796         ti,no-idle;
 797         clocks = <&l4ls_clkctrl AM4_L4LS_TIMER2_CLKCTRL 0>,
 798                  <&l4ls_clkctrl AM4_L4LS_L4_LS_CLKCTRL 0>;
 799         clock-names = "fck", "ick";
 800         timer@0 {
 801                 assigned-clocks = <&timer2_fck>;
 802                 assigned-clock-parents = <&sys_clkin_ck>;
 803         };
 804 };