arch/arm/boot/dts/am33xx.dtsi

   1 /*
   2  * Device Tree Source for AM33XX SoC
   3  *
   4  * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
   5  *
   6  * This file is licensed under the terms of the GNU General Public License
   7  * version 2.  This program is licensed "as is" without any warranty of any
   8  * kind, whether express or implied.
   9  */
  10
  11 #include <dt-bindings/bus/ti-sysc.h>
  12 #include <dt-bindings/gpio/gpio.h>
  13 #include <dt-bindings/pinctrl/am33xx.h>
  14 #include <dt-bindings/clock/am3.h>
  15
  16 / {
  17         compatible = "ti,am33xx";
  18         interrupt-parent = <&intc>;
  19         #address-cells = <1>;
  20         #size-cells = <1>;
  21         chosen { };
  22
  23         aliases {
  24                 i2c0 = &i2c0;
  25                 i2c1 = &i2c1;
  26                 i2c2 = &i2c2;
  27                 serial0 = &uart0;
  28                 serial1 = &uart1;
  29                 serial2 = &uart2;
  30                 serial3 = &uart3;
  31                 serial4 = &uart4;
  32                 serial5 = &uart5;
  33                 d-can0 = &dcan0;
  34                 d-can1 = &dcan1;
  35                 usb0 = &usb0;
  36                 usb1 = &usb1;
  37                 phy0 = &usb0_phy;
  38                 phy1 = &usb1_phy;
  39                 ethernet0 = &cpsw_port1;
  40                 ethernet1 = &cpsw_port2;
  41                 spi0 = &spi0;
  42                 spi1 = &spi1;
  43                 mmc0 = &mmc1;
  44                 mmc1 = &mmc2;
  45                 mmc2 = &mmc3;
  46         };
  47
  48         cpus {
  49                 #address-cells = <1>;
  50                 #size-cells = <0>;
  51                 cpu@0 {
  52                         compatible = "arm,cortex-a8";
  53                         enable-method = "ti,am3352";
  54                         device_type = "cpu";
  55                         reg = <0>;
  56
  57                         operating-points-v2 = <&cpu0_opp_table>;
  58
  59                         clocks = <&dpll_mpu_ck>;
  60                         clock-names = "cpu";
  61
  62                         clock-latency = <300000>; /* From omap-cpufreq driver */
  63                         cpu-idle-states = <&mpu_gate>;
  64                 };
  65
  66                 idle-states {
  67                         mpu_gate: mpu_gate {
  68                                 compatible = "arm,idle-state";
  69                                 entry-latency-us = <40>;
  70                                 exit-latency-us = <90>;
  71                                 min-residency-us = <300>;
  72                                 ti,idle-wkup-m3;
  73                         };
  74                 };
  75         };
  76
  77         cpu0_opp_table: opp-table {
  78                 compatible = "operating-points-v2-ti-cpu";
  79                 syscon = <&scm_conf>;
  80
  81                 /*
  82                  * The three following nodes are marked with opp-suspend
  83                  * because the can not be enabled simultaneously on a
  84                  * single SoC.
  85                  */
  86                 opp50-300000000 {
  87                         opp-hz = /bits/ 64 <300000000>;
  88                         opp-microvolt = <950000 931000 969000>;
  89                         opp-supported-hw = <0x06 0x0010>;
  90                         opp-suspend;
  91                 };
  92
  93                 opp100-275000000 {
  94                         opp-hz = /bits/ 64 <275000000>;
  95                         opp-microvolt = <1100000 1078000 1122000>;
  96                         opp-supported-hw = <0x01 0x00FF>;
  97                         opp-suspend;
  98                 };
  99
 100                 opp100-300000000 {
 101                         opp-hz = /bits/ 64 <300000000>;
 102                         opp-microvolt = <1100000 1078000 1122000>;
 103                         opp-supported-hw = <0x06 0x0020>;
 104                         opp-suspend;
 105                 };
 106
 107                 opp100-500000000 {
 108                         opp-hz = /bits/ 64 <500000000>;
 109                         opp-microvolt = <1100000 1078000 1122000>;
 110                         opp-supported-hw = <0x01 0xFFFF>;
 111                 };
 112
 113                 opp100-600000000 {
 114                         opp-hz = /bits/ 64 <600000000>;
 115                         opp-microvolt = <1100000 1078000 1122000>;
 116                         opp-supported-hw = <0x06 0x0040>;
 117                 };
 118
 119                 opp120-600000000 {
 120                         opp-hz = /bits/ 64 <600000000>;
 121                         opp-microvolt = <1200000 1176000 1224000>;
 122                         opp-supported-hw = <0x01 0xFFFF>;
 123                 };
 124
 125                 opp120-720000000 {
 126                         opp-hz = /bits/ 64 <720000000>;
 127                         opp-microvolt = <1200000 1176000 1224000>;
 128                         opp-supported-hw = <0x06 0x0080>;
 129                 };
 130
 131                 oppturbo-720000000 {
 132                         opp-hz = /bits/ 64 <720000000>;
 133                         opp-microvolt = <1260000 1234800 1285200>;
 134                         opp-supported-hw = <0x01 0xFFFF>;
 135                 };
 136
 137                 oppturbo-800000000 {
 138                         opp-hz = /bits/ 64 <800000000>;
 139                         opp-microvolt = <1260000 1234800 1285200>;
 140                         opp-supported-hw = <0x06 0x0100>;
 141                 };
 142
 143                 oppnitro-1000000000 {
 144                         opp-hz = /bits/ 64 <1000000000>;
 145                         opp-microvolt = <1325000 1298500 1351500>;
 146                         opp-supported-hw = <0x04 0x0200>;
 147                 };
 148         };
 149
 150         target-module@4b000000 {
 151                 compatible = "ti,sysc-omap4-simple", "ti,sysc";
 152                 clocks = <&l3_clkctrl AM3_L3_L3_INSTR_CLKCTRL 0>;
 153                 clock-names = "fck";
 154                 ti,no-idle;
 155                 #address-cells = <1>;
 156                 #size-cells = <1>;
 157                 ranges = <0x0 0x4b000000 0x1000000>;
 158
 159                 target-module@140000 {
 160                         compatible = "ti,sysc-omap4-simple", "ti,sysc";
 161                         clocks = <&l3_aon_clkctrl AM3_L3_AON_DEBUGSS_CLKCTRL 0>;
 162                         clock-names = "fck";
 163                         #address-cells = <1>;
 164                         #size-cells = <1>;
 165                         ranges = <0x0 0x140000 0xec0000>;
 166
 167                         pmu@0 {
 168                                 compatible = "arm,cortex-a8-pmu";
 169                                 interrupts = <3>;
 170                         };
 171                 };
 172         };
 173
 174         /*
 175          * The soc node represents the soc top level view. It is used for IPs
 176          * that are not memory mapped in the MPU view or for the MPU itself.
 177          */
 178         soc {
 179                 compatible = "ti,omap-infra";
 180         };
 181
 182         /*
 183          * XXX: Use a flat representation of the AM33XX interconnect.
 184          * The real AM33XX interconnect network is quite complex. Since
 185          * it will not bring real advantage to represent that in DT
 186          * for the moment, just use a fake OCP bus entry to represent
 187          * the whole bus hierarchy.
 188          */
 189         ocp: ocp {
 190                 compatible = "simple-pm-bus";
 191                 power-domains = <&prm_per>;
 192                 clocks = <&l3_clkctrl AM3_L3_L3_MAIN_CLKCTRL 0>;
 193                 clock-names = "fck";
 194                 #address-cells = <1>;
 195                 #size-cells = <1>;
 196                 ranges;
 197
 198                 l4_wkup: interconnect@44c00000 {
 199                 };
 200                 l4_per: interconnect@48000000 {
 201                 };
 202                 l4_fw: interconnect@47c00000 {
 203                 };
 204                 l4_fast: interconnect@4a000000 {
 205                 };
 206                 l4_mpuss: interconnect@4b140000 {
 207                 };
 208
 209                 intc: interrupt-controller@48200000 {
 210                         compatible = "ti,am33xx-intc";
 211                         interrupt-controller;
 212                         #interrupt-cells = <1>;
 213                         reg = <0x48200000 0x1000>;
 214                 };
 215
 216                 target-module@49000000 {
 217                         compatible = "ti,sysc-omap4", "ti,sysc";
 218                         reg = <0x49000000 0x4>;
 219                         reg-names = "rev";
 220                         clocks = <&l3_clkctrl AM3_L3_TPCC_CLKCTRL 0>;
 221                         clock-names = "fck";
 222                         #address-cells = <1>;
 223                         #size-cells = <1>;
 224                         ranges = <0x0 0x49000000 0x10000>;
 225
 226                         edma: dma@0 {
 227                                 compatible = "ti,edma3-tpcc";
 228                                 reg = <0 0x10000>;
 229                                 reg-names = "edma3_cc";
 230                                 interrupts = <12 13 14>;
 231                                 interrupt-names = "edma3_ccint", "edma3_mperr",
 232                                                   "edma3_ccerrint";
 233                                 dma-requests = <64>;
 234                                 #dma-cells = <2>;
 235
 236                                 ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
 237                                            <&edma_tptc2 0>;
 238
 239                                 ti,edma-memcpy-channels = <20 21>;
 240                         };
 241                 };
 242
 243                 target-module@49800000 {
 244                         compatible = "ti,sysc-omap4", "ti,sysc";
 245                         reg = <0x49800000 0x4>,
 246                               <0x49800010 0x4>;
 247                         reg-names = "rev", "sysc";
 248                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 249                         ti,sysc-midle = <SYSC_IDLE_FORCE>;
 250                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 251                                         <SYSC_IDLE_SMART>;
 252                         clocks = <&l3_clkctrl AM3_L3_TPTC0_CLKCTRL 0>;
 253                         clock-names = "fck";
 254                         #address-cells = <1>;
 255                         #size-cells = <1>;
 256                         ranges = <0x0 0x49800000 0x100000>;
 257
 258                         edma_tptc0: dma@0 {
 259                                 compatible = "ti,edma3-tptc";
 260                                 reg = <0 0x100000>;
 261                                 interrupts = <112>;
 262                                 interrupt-names = "edma3_tcerrint";
 263                         };
 264                 };
 265
 266                 target-module@49900000 {
 267                         compatible = "ti,sysc-omap4", "ti,sysc";
 268                         reg = <0x49900000 0x4>,
 269                               <0x49900010 0x4>;
 270                         reg-names = "rev", "sysc";
 271                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 272                         ti,sysc-midle = <SYSC_IDLE_FORCE>;
 273                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 274                                         <SYSC_IDLE_SMART>;
 275                         clocks = <&l3_clkctrl AM3_L3_TPTC1_CLKCTRL 0>;
 276                         clock-names = "fck";
 277                         #address-cells = <1>;
 278                         #size-cells = <1>;
 279                         ranges = <0x0 0x49900000 0x100000>;
 280
 281                         edma_tptc1: dma@0 {
 282                                 compatible = "ti,edma3-tptc";
 283                                 reg = <0 0x100000>;
 284                                 interrupts = <113>;
 285                                 interrupt-names = "edma3_tcerrint";
 286                         };
 287                 };
 288
 289                 target-module@49a00000 {
 290                         compatible = "ti,sysc-omap4", "ti,sysc";
 291                         reg = <0x49a00000 0x4>,
 292                               <0x49a00010 0x4>;
 293                         reg-names = "rev", "sysc";
 294                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 295                         ti,sysc-midle = <SYSC_IDLE_FORCE>;
 296                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 297                                         <SYSC_IDLE_SMART>;
 298                         clocks = <&l3_clkctrl AM3_L3_TPTC2_CLKCTRL 0>;
 299                         clock-names = "fck";
 300                         #address-cells = <1>;
 301                         #size-cells = <1>;
 302                         ranges = <0x0 0x49a00000 0x100000>;
 303
 304                         edma_tptc2: dma@0 {
 305                                 compatible = "ti,edma3-tptc";
 306                                 reg = <0 0x100000>;
 307                                 interrupts = <114>;
 308                                 interrupt-names = "edma3_tcerrint";
 309                         };
 310                 };
 311
 312                 target-module@47810000 {
 313                         compatible = "ti,sysc-omap2", "ti,sysc";
 314                         reg = <0x478102fc 0x4>,
 315                               <0x47810110 0x4>,
 316                               <0x47810114 0x4>;
 317                         reg-names = "rev", "sysc", "syss";
 318                         ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
 319                                          SYSC_OMAP2_ENAWAKEUP |
 320                                          SYSC_OMAP2_SOFTRESET |
 321                                          SYSC_OMAP2_AUTOIDLE)>;
 322                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 323                                         <SYSC_IDLE_NO>,
 324                                         <SYSC_IDLE_SMART>;
 325                         ti,syss-mask = <1>;
 326                         clocks = <&l3s_clkctrl AM3_L3S_MMC3_CLKCTRL 0>;
 327                         clock-names = "fck";
 328                         #address-cells = <1>;
 329                         #size-cells = <1>;
 330                         ranges = <0x0 0x47810000 0x1000>;
 331
 332                         mmc3: mmc@0 {
 333                                 compatible = "ti,am335-sdhci";
 334                                 ti,needs-special-reset;
 335                                 interrupts = <29>;
 336                                 reg = <0x0 0x1000>;
 337                                 status = "disabled";
 338                         };
 339                 };
 340
 341                 usb: target-module@47400000 {
 342                         compatible = "ti,sysc-omap4", "ti,sysc";
 343                         reg = <0x47400000 0x4>,
 344                               <0x47400010 0x4>;
 345                         reg-names = "rev", "sysc";
 346                         ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
 347                                          SYSC_OMAP4_SOFTRESET)>;
 348                         ti,sysc-midle = <SYSC_IDLE_FORCE>,
 349                                         <SYSC_IDLE_NO>,
 350                                         <SYSC_IDLE_SMART>;
 351                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 352                                         <SYSC_IDLE_NO>,
 353                                         <SYSC_IDLE_SMART>,
 354                                         <SYSC_IDLE_SMART_WKUP>;
 355                         clocks = <&l3s_clkctrl AM3_L3S_USB_OTG_HS_CLKCTRL 0>;
 356                         clock-names = "fck";
 357                         #address-cells = <1>;
 358                         #size-cells = <1>;
 359                         ranges = <0x0 0x47400000 0x8000>;
 360
 361                         usb0_phy: usb-phy@1300 {
 362                                 compatible = "ti,am335x-usb-phy";
 363                                 reg = <0x1300 0x100>;
 364                                 reg-names = "phy";
 365                                 ti,ctrl_mod = <&usb_ctrl_mod>;
 366                                 #phy-cells = <0>;
 367                         };
 368
 369                         usb0: usb@1400 {
 370                                 compatible = "ti,musb-am33xx";
 371                                 reg = <0x1400 0x400>,
 372                                       <0x1000 0x200>;
 373                                 reg-names = "mc", "control";
 374
 375                                 interrupts = <18>;
 376                                 interrupt-names = "mc";
 377                                 dr_mode = "otg";
 378                                 mentor,multipoint = <1>;
 379                                 mentor,num-eps = <16>;
 380                                 mentor,ram-bits = <12>;
 381                                 mentor,power = <500>;
 382                                 phys = <&usb0_phy>;
 383
 384                                 dmas = <&cppi41dma  0 0 &cppi41dma  1 0
 385                                         &cppi41dma  2 0 &cppi41dma  3 0
 386                                         &cppi41dma  4 0 &cppi41dma  5 0
 387                                         &cppi41dma  6 0 &cppi41dma  7 0
 388                                         &cppi41dma  8 0 &cppi41dma  9 0
 389                                         &cppi41dma 10 0 &cppi41dma 11 0
 390                                         &cppi41dma 12 0 &cppi41dma 13 0
 391                                         &cppi41dma 14 0 &cppi41dma  0 1
 392                                         &cppi41dma  1 1 &cppi41dma  2 1
 393                                         &cppi41dma  3 1 &cppi41dma  4 1
 394                                         &cppi41dma  5 1 &cppi41dma  6 1
 395                                         &cppi41dma  7 1 &cppi41dma  8 1
 396                                         &cppi41dma  9 1 &cppi41dma 10 1
 397                                         &cppi41dma 11 1 &cppi41dma 12 1
 398                                         &cppi41dma 13 1 &cppi41dma 14 1>;
 399                                 dma-names =
 400                                         "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
 401                                         "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
 402                                         "rx14", "rx15",
 403                                         "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
 404                                         "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
 405                                         "tx14", "tx15";
 406                         };
 407
 408                         usb1_phy: usb-phy@1b00 {
 409                                 compatible = "ti,am335x-usb-phy";
 410                                 reg = <0x1b00 0x100>;
 411                                 reg-names = "phy";
 412                                 ti,ctrl_mod = <&usb_ctrl_mod>;
 413                                 #phy-cells = <0>;
 414                         };
 415
 416                         usb1: usb@1800 {
 417                                 compatible = "ti,musb-am33xx";
 418                                 reg = <0x1c00 0x400>,
 419                                       <0x1800 0x200>;
 420                                 reg-names = "mc", "control";
 421                                 interrupts = <19>;
 422                                 interrupt-names = "mc";
 423                                 dr_mode = "otg";
 424                                 mentor,multipoint = <1>;
 425                                 mentor,num-eps = <16>;
 426                                 mentor,ram-bits = <12>;
 427                                 mentor,power = <500>;
 428                                 phys = <&usb1_phy>;
 429
 430                                 dmas = <&cppi41dma 15 0 &cppi41dma 16 0
 431                                         &cppi41dma 17 0 &cppi41dma 18 0
 432                                         &cppi41dma 19 0 &cppi41dma 20 0
 433                                         &cppi41dma 21 0 &cppi41dma 22 0
 434                                         &cppi41dma 23 0 &cppi41dma 24 0
 435                                         &cppi41dma 25 0 &cppi41dma 26 0
 436                                         &cppi41dma 27 0 &cppi41dma 28 0
 437                                         &cppi41dma 29 0 &cppi41dma 15 1
 438                                         &cppi41dma 16 1 &cppi41dma 17 1
 439                                         &cppi41dma 18 1 &cppi41dma 19 1
 440                                         &cppi41dma 20 1 &cppi41dma 21 1
 441                                         &cppi41dma 22 1 &cppi41dma 23 1
 442                                         &cppi41dma 24 1 &cppi41dma 25 1
 443                                         &cppi41dma 26 1 &cppi41dma 27 1
 444                                         &cppi41dma 28 1 &cppi41dma 29 1>;
 445                                 dma-names =
 446                                         "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
 447                                         "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
 448                                         "rx14", "rx15",
 449                                         "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
 450                                         "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
 451                                         "tx14", "tx15";
 452                         };
 453
 454                         cppi41dma: dma-controller@2000 {
 455                                 compatible = "ti,am3359-cppi41";
 456                                 reg =  <0x0000 0x1000>,
 457                                        <0x2000 0x1000>,
 458                                        <0x3000 0x1000>,
 459                                        <0x4000 0x4000>;
 460                                 reg-names = "glue", "controller", "scheduler", "queuemgr";
 461                                 interrupts = <17>;
 462                                 interrupt-names = "glue";
 463                                 #dma-cells = <2>;
 464                                 #dma-channels = <30>;
 465                                 #dma-requests = <256>;
 466                         };
 467                 };
 468
 469                 target-module@40300000 {
 470                         compatible = "ti,sysc-omap4-simple", "ti,sysc";
 471                         clocks = <&l3_clkctrl AM3_L3_OCMCRAM_CLKCTRL 0>;
 472                         clock-names = "fck";
 473                         ti,no-idle;
 474                         #address-cells = <1>;
 475                         #size-cells = <1>;
 476                         ranges = <0 0x40300000 0x10000>;
 477
 478                         ocmcram: sram@0 {
 479                                 compatible = "mmio-sram";
 480                                 reg = <0 0x10000>; /* 64k */
 481                                 ranges = <0 0 0x10000>;
 482                                 #address-cells = <1>;
 483                                 #size-cells = <1>;
 484
 485                                 pm_sram_code: pm-code-sram@0 {
 486                                         compatible = "ti,sram";
 487                                         reg = <0x0 0x1000>;
 488                                         protect-exec;
 489                                 };
 490
 491                                 pm_sram_data: pm-data-sram@1000 {
 492                                         compatible = "ti,sram";
 493                                         reg = <0x1000 0x1000>;
 494                                         pool;
 495                                 };
 496                         };
 497                 };
 498
 499                 target-module@4c000000 {
 500                         compatible = "ti,sysc-omap4-simple", "ti,sysc";
 501                         reg = <0x4c000000 0x4>;
 502                         reg-names = "rev";
 503                         clocks = <&l3_clkctrl AM3_L3_EMIF_CLKCTRL 0>;
 504                         clock-names = "fck";
 505                         ti,no-idle;
 506                         #address-cells = <1>;
 507                         #size-cells = <1>;
 508                         ranges = <0x0 0x4c000000 0x1000000>;
 509
 510                         emif: emif@0 {
 511                                 compatible = "ti,emif-am3352";
 512                                 reg = <0 0x1000000>;
 513                                 interrupts = <101>;
 514                                 sram = <&pm_sram_code
 515                                         &pm_sram_data>;
 516                         };
 517                 };
 518
 519                 target-module@50000000 {
 520                         compatible = "ti,sysc-omap2", "ti,sysc";
 521                         reg = <0x50000000 4>,
 522                               <0x50000010 4>,
 523                               <0x50000014 4>;
 524                         reg-names = "rev", "sysc", "syss";
 525                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 526                                         <SYSC_IDLE_NO>,
 527                                         <SYSC_IDLE_SMART>;
 528                         ti,syss-mask = <1>;
 529                         clocks = <&l3s_clkctrl AM3_L3S_GPMC_CLKCTRL 0>;
 530                         clock-names = "fck";
 531                         #address-cells = <1>;
 532                         #size-cells = <1>;
 533                         ranges = <0x50000000 0x50000000 0x00001000>, /* regs */
 534                                  <0x00000000 0x00000000 0x40000000>; /* data */
 535
 536                         gpmc: gpmc@50000000 {
 537                                 compatible = "ti,am3352-gpmc";
 538                                 reg = <0x50000000 0x2000>;
 539                                 interrupts = <100>;
 540                                 dmas = <&edma 52 0>;
 541                                 dma-names = "rxtx";
 542                                 gpmc,num-cs = <7>;
 543                                 gpmc,num-waitpins = <2>;
 544                                 #address-cells = <2>;
 545                                 #size-cells = <1>;
 546                                 interrupt-controller;
 547                                 #interrupt-cells = <2>;
 548                                 gpio-controller;
 549                                 #gpio-cells = <2>;
 550                                 status = "disabled";
 551                         };
 552                 };
 553
 554                 sham_target: target-module@53100000 {
 555                         compatible = "ti,sysc-omap3-sham", "ti,sysc";
 556                         reg = <0x53100100 0x4>,
 557                               <0x53100110 0x4>,
 558                               <0x53100114 0x4>;
 559                         reg-names = "rev", "sysc", "syss";
 560                         ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
 561                                          SYSC_OMAP2_AUTOIDLE)>;
 562                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 563                                         <SYSC_IDLE_NO>,
 564                                         <SYSC_IDLE_SMART>;
 565                         ti,syss-mask = <1>;
 566                         /* Domains (P, C): per_pwrdm, l3_clkdm */
 567                         clocks = <&l3_clkctrl AM3_L3_SHAM_CLKCTRL 0>;
 568                         clock-names = "fck";
 569                         #address-cells = <1>;
 570                         #size-cells = <1>;
 571                         ranges = <0x0 0x53100000 0x1000>;
 572
 573                         sham: sham@0 {
 574                                 compatible = "ti,omap4-sham";
 575                                 reg = <0 0x200>;
 576                                 interrupts = <109>;
 577                                 dmas = <&edma 36 0>;
 578                                 dma-names = "rx";
 579                         };
 580                 };
 581
 582                 aes_target: target-module@53500000 {
 583                         compatible = "ti,sysc-omap2", "ti,sysc";
 584                         reg = <0x53500080 0x4>,
 585                               <0x53500084 0x4>,
 586                               <0x53500088 0x4>;
 587                         reg-names = "rev", "sysc", "syss";
 588                         ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
 589                                          SYSC_OMAP2_AUTOIDLE)>;
 590                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 591                                         <SYSC_IDLE_NO>,
 592                                         <SYSC_IDLE_SMART>,
 593                                         <SYSC_IDLE_SMART_WKUP>;
 594                         ti,syss-mask = <1>;
 595                         /* Domains (P, C): per_pwrdm, l3_clkdm */
 596                         clocks = <&l3_clkctrl AM3_L3_AES_CLKCTRL 0>;
 597                         clock-names = "fck";
 598                         #address-cells = <1>;
 599                         #size-cells = <1>;
 600                         ranges = <0x0 0x53500000 0x1000>;
 601
 602                         aes: aes@0 {
 603                                 compatible = "ti,omap4-aes";
 604                                 reg = <0 0xa0>;
 605                                 interrupts = <103>;
 606                                 dmas = <&edma 6 0>,
 607                                        <&edma 5 0>;
 608                                 dma-names = "tx", "rx";
 609                         };
 610                 };
 611
 612                 target-module@56000000 {
 613                         compatible = "ti,sysc-omap4", "ti,sysc";
 614                         reg = <0x5600fe00 0x4>,
 615                               <0x5600fe10 0x4>;
 616                         reg-names = "rev", "sysc";
 617                         ti,sysc-midle = <SYSC_IDLE_FORCE>,
 618                                         <SYSC_IDLE_NO>,
 619                                         <SYSC_IDLE_SMART>;
 620                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 621                                         <SYSC_IDLE_NO>,
 622                                         <SYSC_IDLE_SMART>;
 623                         clocks = <&gfx_l3_clkctrl AM3_GFX_L3_GFX_CLKCTRL 0>;
 624                         clock-names = "fck";
 625                         power-domains = <&prm_gfx>;
 626                         resets = <&prm_gfx 0>;
 627                         reset-names = "rstctrl";
 628                         #address-cells = <1>;
 629                         #size-cells = <1>;
 630                         ranges = <0 0x56000000 0x1000000>;
 631
 632                         /*
 633                          * Closed source PowerVR driver, no child device
 634                          * binding or driver in mainline
 635                          */
 636                 };
 637         };
 638 };
 639
 640 #include "am33xx-l4.dtsi"
 641 #include "am33xx-clocks.dtsi"
 642
 643 &prcm {
 644         prm_per: prm@c00 {
 645                 compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
 646                 reg = <0xc00 0x100>;
 647                 #reset-cells = <1>;
 648                 #power-domain-cells = <0>;
 649         };
 650
 651         prm_wkup: prm@d00 {
 652                 compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
 653                 reg = <0xd00 0x100>;
 654                 #reset-cells = <1>;
 655                 #power-domain-cells = <0>;
 656         };
 657
 658         prm_mpu: prm@e00 {
 659                 compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
 660                 reg = <0xe00 0x100>;
 661                 #power-domain-cells = <0>;
 662         };
 663
 664         prm_device: prm@f00 {
 665                 compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
 666                 reg = <0xf00 0x100>;
 667                 #reset-cells = <1>;
 668         };
 669
 670         prm_rtc: prm@1000 {
 671                 compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
 672                 reg = <0x1000 0x100>;
 673                 #power-domain-cells = <0>;
 674         };
 675
 676         prm_gfx: prm@1100 {
 677                 compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
 678                 reg = <0x1100 0x100>;
 679                 #power-domain-cells = <0>;
 680                 #reset-cells = <1>;
 681         };
 682
 683         prm_cefuse: prm@1200 {
 684                 compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
 685                 reg = <0x1200 0x100>;
 686                 #power-domain-cells = <0>;
 687         };
 688 };
 689
 690 /* Preferred always-on timer for clocksource */
 691 &timer1_target {
 692         clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_TIMER1_CLKCTRL 0>,
 693                  <&l4_wkup_clkctrl AM3_L4_WKUP_L4_WKUP_CLKCTRL 0>;
 694         clock-names = "fck", "ick";
 695         ti,no-reset-on-init;
 696         ti,no-idle;
 697         timer@0 {
 698                 assigned-clocks = <&timer1_fck>;
 699                 assigned-clock-parents = <&sys_clkin_ck>;
 700         };
 701 };
 702
 703 /* Preferred timer for clockevent */
 704 &timer2_target {
 705         clocks = <&l4ls_clkctrl AM3_L4LS_TIMER2_CLKCTRL 0>,
 706                  <&l4ls_clkctrl AM3_L4LS_L4_LS_CLKCTRL 0>;
 707         clock-names = "fck", "ick";
 708         ti,no-reset-on-init;
 709         ti,no-idle;
 710         timer@0 {
 711                 assigned-clocks = <&timer2_fck>;
 712                 assigned-clock-parents = <&sys_clkin_ck>;
 713         };
 714 };