arch/arm/boot/dts/am335x-osd3358-sm-red.dts

   1 //SPDX-License-Identifier: GPL-2.0
   2 /* Copyright (C) 2018 Octavo Systems LLC - https://www.octavosystems.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 /dts-v1/;
  10
  11 #include "am33xx.dtsi"
  12 #include "am335x-osd335x-common.dtsi"
  13 #include <dt-bindings/interrupt-controller/irq.h>
  14
  15 #include <dt-bindings/display/tda998x.h>
  16
  17 / {
  18         model = "Octavo Systems OSD3358-SM-RED";
  19         compatible = "oct,osd3358-sm-refdesign", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
  20 };
  21
  22 &ldo3_reg {
  23         regulator-min-microvolt = <1800000>;
  24         regulator-max-microvolt = <1800000>;
  25         regulator-always-on;
  26 };
  27
  28 &mmc2 {
  29         vmmc-supply = <&vmmcsd_fixed>;
  30         pinctrl-names = "default";
  31         pinctrl-0 = <&emmc_pins>;
  32         bus-width = <8>;
  33         status = "okay";
  34 };
  35
  36 &lcdc {
  37         status = "okay";
  38
  39         /* If you want to get 24 bit RGB and 16 BGR mode instead of
  40          * current 16 bit RGB and 24 BGR modes, set the propety
  41          * below to "crossed" and uncomment the video-ports -property
  42          * in tda19988 node.
  43          * AM335x errata for wiring:
  44          * https://www.ti.com/lit/er/sprz360i/sprz360i.pdf
  45          */
  46
  47         blue-and-red-wiring = "straight";
  48
  49         port {
  50                 lcdc_0: endpoint {
  51                         remote-endpoint = <&hdmi_0>;
  52                 };
  53         };
  54 };
  55
  56 &i2c0 {
  57         tda19988: hdmi-encoder@70 {
  58                 compatible = "nxp,tda998x";
  59                 reg = <0x70>;
  60
  61                 pinctrl-names = "default", "off";
  62                 pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
  63                 pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
  64
  65                 /* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
  66                 /* video-ports = <0x234501>; */
  67
  68                 #sound-dai-cells = <0>;
  69                 audio-ports = < TDA998x_I2S     0x03>;
  70
  71                 port {
  72                         hdmi_0: endpoint {
  73                                 remote-endpoint = <&lcdc_0>;
  74                         };
  75                 };
  76         };
  77
  78         mpu9250: imu@68 {
  79                 compatible = "invensense,mpu6050";
  80                 reg = <0x68>;
  81                 interrupt-parent = <&gpio3>;
  82                 interrupts = <21 IRQ_TYPE_EDGE_RISING>;
  83                 i2c-gate {
  84                         #address-cells = <1>;
  85                         #size-cells = <0>;
  86                         ax8975@c {
  87                                 compatible = "ak,ak8975";
  88                                 reg = <0x0c>;
  89                         };
  90                 };
  91                 /*invensense,int_config = <0x10>;
  92                 invensense,level_shifter = <0>;
  93                 invensense,orientation = [01 00 00 00 01 00 00 00 01];
  94                 invensense,sec_slave_type = <0>;
  95                 invensense,key = [4e cc 7e eb f6 1e 35 22 00 34 0d 65 32 e9 94 89];*/
  96         };
  97
  98         bmp280: pressure@76 {
  99                 compatible = "bosch,bmp280";
 100                 reg = <0x76>;
 101         };
 102 };
 103
 104 &mcasp0 {
 105         #sound-dai-cells = <0>;
 106         pinctrl-names = "default";
 107         pinctrl-0 = <&mcasp0_pins>;
 108         status = "okay";
 109         op-mode = <0>;  /* MCASP_IIS_MODE */
 110         tdm-slots = <2>;
 111         serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 112                         0 0 1 0
 113                 >;
 114         tx-num-evt = <32>;
 115         rx-num-evt = <32>;
 116 };
 117
 118 / {
 119         clk_mcasp0_fixed: clk-mcasp0-fixed {
 120                 #clock-cells = <0>;
 121                 compatible = "fixed-clock";
 122                 clock-frequency = <24576000>;
 123         };
 124
 125         clk_mcasp0: clk-mcasp0 {
 126                 #clock-cells = <0>;
 127                 compatible = "gpio-gate-clock";
 128                 clocks = <&clk_mcasp0_fixed>;
 129                 enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
 130         };
 131
 132         sound {
 133                 compatible = "simple-audio-card";
 134                 simple-audio-card,name = "TI BeagleBone Black";
 135                 simple-audio-card,format = "i2s";
 136                 simple-audio-card,bitclock-master = <&dailink0_master>;
 137                 simple-audio-card,frame-master = <&dailink0_master>;
 138
 139                 dailink0_master: simple-audio-card,cpu {
 140                         sound-dai = <&mcasp0>;
 141                         clocks = <&clk_mcasp0>;
 142                 };
 143
 144                 simple-audio-card,codec {
 145                         sound-dai = <&tda19988>;
 146                 };
 147         };
 148
 149         chosen {
 150                 stdout-path = &uart0;
 151         };
 152
 153         leds {
 154                 pinctrl-names = "default";
 155                 pinctrl-0 = <&user_leds_s0>;
 156
 157                 compatible = "gpio-leds";
 158
 159                 led2 {
 160                         label = "beaglebone:green:usr0";
 161                         gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 162                         linux,default-trigger = "heartbeat";
 163                         default-state = "off";
 164                 };
 165
 166                 led3 {
 167                         label = "beaglebone:green:usr1";
 168                         gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
 169                         linux,default-trigger = "mmc0";
 170                         default-state = "off";
 171                 };
 172
 173                 led4 {
 174                         label = "beaglebone:green:usr2";
 175                         gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 176                         linux,default-trigger = "cpu0";
 177                         default-state = "off";
 178                 };
 179
 180                 led5 {
 181                         label = "beaglebone:green:usr3";
 182                         gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
 183                         linux,default-trigger = "mmc1";
 184                         default-state = "off";
 185                 };
 186         };
 187
 188         vmmcsd_fixed: fixedregulator0 {
 189                 compatible = "regulator-fixed";
 190                 regulator-name = "vmmcsd_fixed";
 191                 regulator-min-microvolt = <3300000>;
 192                 regulator-max-microvolt = <3300000>;
 193         };
 194 };
 195
 196 &am33xx_pinmux {
 197         pinctrl-names = "default";
 198         pinctrl-0 = <&clkout2_pin>;
 199
 200         nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins {
 201                 pinctrl-single,pins = <
 202                         AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
 203                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
 204                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
 205                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
 206                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
 207                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
 208                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
 209                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
 210                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
 211                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
 212                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
 213                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
 214                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
 215                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
 216                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
 217                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
 218                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
 219                         AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 220                         AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 221                         AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 222                         AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 223                 >;
 224         };
 225
 226         nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins {
 227                 pinctrl-single,pins = <
 228                         AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
 229                 >;
 230         };
 231
 232         mcasp0_pins: mcasp0-pins {
 233                 pinctrl-single,pins = <
 234                         AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0)
 235                         AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
 236                         AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
 237                         AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 238                         AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
 239                 >;
 240         };
 241
 242         flash_enable: flash-enable {
 243                 pinctrl-single,pins = <
 244                         AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7)        /* rmii1_ref_clk.gpio0_29 */
 245                 >;
 246         };
 247
 248         imu_interrupt: imu-interrupt {
 249                 pinctrl-single,pins = <
 250                         AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)    /* mii1_rx_er.gpio3_2 */
 251                 >;
 252         };
 253
 254         ethernet_interrupt: ethernet-interrupt{
 255                 pinctrl-single,pins = <
 256                         AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* mii1_col.gpio3_0 */
 257                 >;
 258         };
 259
 260         user_leds_s0: user-leds-s0 {
 261                 pinctrl-single,pins = <
 262                         AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* gpmc_a5.gpio1_21 */
 263                         AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLUP, MUX_MODE7)        /* gpmc_a6.gpio1_22 */
 264                         AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* gpmc_a7.gpio1_23 */
 265                         AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7)        /* gpmc_a8.gpio1_24 */
 266                 >;
 267         };
 268
 269         i2c2_pins: pinmux-i2c2-pins {
 270                 pinctrl-single,pins = <
 271                         AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)      /* uart1_ctsn.i2c2_sda */
 272                         AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)      /* uart1_rtsn.i2c2_scl */
 273                 >;
 274         };
 275
 276         uart0_pins: pinmux-uart0-pins {
 277                 pinctrl-single,pins = <
 278                         AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 279                         AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 280                 >;
 281         };
 282
 283         clkout2_pin: pinmux-clkout2-pin {
 284                 pinctrl-single,pins = <
 285                         AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)     /* xdma_event_intr1.clkout2 */
 286                 >;
 287         };
 288
 289         cpsw_default: cpsw-default {
 290                 pinctrl-single,pins = <
 291                         /* Slave 1 */
 292                         AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)   /* mii1_txen.rgmii1_tctl */
 293                         AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)            /* mii1_rxdv.rgmii1_rctl */
 294                         AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
 295                         AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
 296                         AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
 297                         AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
 298                         AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
 299                         AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)
 300                         AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)
 301                         AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)
 302                         AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)
 303                         AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)
 304                 >;
 305         };
 306
 307         cpsw_sleep: cpsw-sleep {
 308                 pinctrl-single,pins = <
 309                         /* Slave 1 reset value */
 310                         AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
 311                         AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
 312                         AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
 313                         AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
 314                         AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
 315                         AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
 316                         AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
 317                         AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
 318                         AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
 319                         AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
 320                         AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
 321                         AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
 322                 >;
 323         };
 324
 325         davinci_mdio_default: davinci-mdio-default {
 326                 pinctrl-single,pins = <
 327                         /* MDIO */
 328                         AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
 329                         AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
 330                 >;
 331         };
 332
 333         davinci_mdio_sleep: davinci-mdio-sleep {
 334                 pinctrl-single,pins = <
 335                         /* MDIO reset value */
 336                         AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
 337                         AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
 338                 >;
 339         };
 340
 341         mmc1_pins: pinmux-mmc1-pins {
 342                 pinctrl-single,pins = <
 343                         AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */
 344                         AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
 345                         AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
 346                         AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
 347                         AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
 348                         AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
 349                         AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
 350                 >;
 351         };
 352
 353         emmc_pins: pinmux-emmc-pins {
 354                 pinctrl-single,pins = <
 355                         AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
 356                         AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
 357                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
 358                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
 359                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
 360                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
 361                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
 362                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
 363                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
 364                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
 365                 >;
 366         };
 367 };
 368
 369
 370 &uart0 {
 371         pinctrl-names = "default";
 372         pinctrl-0 = <&uart0_pins>;
 373
 374         status = "okay";
 375 };
 376
 377 &usb0 {
 378         dr_mode = "peripheral";
 379         interrupts-extended = <&intc 18 &tps 0>;
 380         interrupt-names = "mc", "vbus";
 381 };
 382
 383 &usb1 {
 384         dr_mode = "host";
 385 };
 386
 387 &i2c2 {
 388         pinctrl-names = "default";
 389         pinctrl-0 = <&i2c2_pins>;
 390         status = "okay";
 391         clock-frequency = <100000>;
 392 };
 393
 394 &cpsw_port1 {
 395         phy-handle = <&ethphy0>;
 396         phy-mode = "rgmii-txid";
 397         ti,dual-emac-pvid = <1>;
 398 };
 399
 400 &cpsw_port2 {
 401         status = "disabled";
 402 };
 403
 404 &mac_sw {
 405         pinctrl-names = "default", "sleep";
 406         pinctrl-0 = <&cpsw_default>;
 407         pinctrl-1 = <&cpsw_sleep>;
 408         status = "okay";
 409 };
 410
 411 &davinci_mdio_sw {
 412         pinctrl-names = "default", "sleep";
 413         pinctrl-0 = <&davinci_mdio_default>;
 414         pinctrl-1 = <&davinci_mdio_sleep>;
 415
 416         ethphy0: ethernet-phy@4 {
 417                 reg = <4>;
 418         };
 419 };
 420
 421 &mmc1 {
 422         status = "okay";
 423         vmmc-supply = <&vmmcsd_fixed>;
 424         bus-width = <0x4>;
 425         pinctrl-names = "default";
 426         pinctrl-0 = <&mmc1_pins>;
 427         cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 428 };
 429
 430 &rtc {
 431         system-power-controller;
 432         clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 433         clock-names = "ext-clk", "int-clk";
 434 };