arch/arm/boot/dts/am335x-baltos-ir2110.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
   4  */
   5
   6 /*
   7  * VScom OnRISC
   8  * http://www.vscom.de
   9  */
  10
  11 /dts-v1/;
  12
  13 #include "am335x-baltos.dtsi"
  14 #include "am335x-baltos-leds.dtsi"
  15
  16 / {
  17         model = "OnRISC Baltos iR 2110";
  18 };
  19
  20 &am33xx_pinmux {
  21         uart1_pins: pinmux_uart1_pins {
  22                 pinctrl-single,pins = <
  23                         AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
  24                         AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
  25                         AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
  26                         AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
  27                         AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
  28                         AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
  29                         AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
  30                         AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
  31                 >;
  32         };
  33
  34         mmc1_pins: pinmux_mmc1_pins {
  35                 pinctrl-single,pins = <
  36                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
  37                 >;
  38         };
  39 };
  40
  41 &uart1 {
  42         pinctrl-names = "default";
  43         pinctrl-0 = <&uart1_pins>;
  44         dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
  45         dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
  46         dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
  47         rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
  48
  49         status = "okay";
  50 };
  51
  52 &usb0_phy {
  53         status = "okay";
  54 };
  55
  56 &usb0 {
  57         status = "okay";
  58         dr_mode = "host";
  59 };
  60
  61 &davinci_mdio_sw {
  62         phy0: ethernet-phy@0 {
  63                 reg = <1>;
  64         };
  65 };
  66
  67 &cpsw_port1 {
  68         phy-mode = "rmii";
  69         ti,dual-emac-pvid = <1>;
  70         phy-handle = <&phy0>;
  71 };
  72
  73 &cpsw_port2 {
  74         phy-mode = "rgmii-id";
  75         ti,dual-emac-pvid = <2>;
  76         phy-handle = <&phy1>;
  77 };
  78
  79 &mmc1 {
  80         pinctrl-names = "default";
  81         pinctrl-0 = <&mmc1_pins>;
  82         cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  83 };