Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso...
[linux-2.6-microblaze.git] / Documentation / devicetree / bindings / submitting-patches.rst
1 .. SPDX-License-Identifier: GPL-2.0
2
3 ==========================================
4 Submitting devicetree (DT) binding patches
5 ==========================================
6
7 I. For patch submitters
8 =======================
9
10   0) Normal patch submission rules from Documentation/process/submitting-patches.rst
11      applies.
12
13   1) The Documentation/ and include/dt-bindings/ portion of the patch should
14      be a separate patch. The preferred subject prefix for binding patches is::
15
16        "dt-bindings: <binding dir>: ..."
17
18      The 80 characters of the subject are precious. It is recommended to not
19      use "Documentation" or "doc" because that is implied. All bindings are
20      docs. Repeating "binding" again should also be avoided.
21
22   2) DT binding files are written in DT schema format using json-schema
23      vocabulary and YAML file format. The DT binding files must pass validation
24      by running::
25
26        make dt_binding_check
27
28      See Documentation/devicetree/writing-schema.rst for more details about
29      schema and tools setup.
30
31   3) DT binding files should be dual licensed. The preferred license tag is
32      (GPL-2.0-only OR BSD-2-Clause).
33
34   4) Submit the entire series to the devicetree mailinglist at
35
36        devicetree@vger.kernel.org
37
38      and Cc: the DT maintainers. Use scripts/get_maintainer.pl to identify
39      all of the DT maintainers.
40
41   5) The Documentation/ portion of the patch should come in the series before
42      the code implementing the binding.
43
44   6) Any compatible strings used in a chip or board DTS file must be
45      previously documented in the corresponding DT binding text file
46      in Documentation/devicetree/bindings.  This rule applies even if
47      the Linux device driver does not yet match on the compatible
48      string.  [ checkpatch will emit warnings if this step is not
49      followed as of commit bff5da4335256513497cc8c79f9a9d1665e09864
50      ("checkpatch: add DT compatible string documentation checks"). ]
51
52   7) The wildcard "<chip>" may be used in compatible strings, as in
53      the following example:
54
55          - compatible: Must contain '"nvidia,<chip>-pcie",
56            "nvidia,tegra20-pcie"' where <chip> is tegra30, tegra132, ...
57
58      As in the above example, the known values of "<chip>" should be
59      documented if it is used.
60
61   8) If a documented compatible string is not yet matched by the
62      driver, the documentation should also include a compatible
63      string that is matched by the driver (as in the "nvidia,tegra20-pcie"
64      example above).
65
66
67 II. For kernel maintainers
68 ==========================
69
70   1) If you aren't comfortable reviewing a given binding, reply to it and ask
71      the devicetree maintainers for guidance.  This will help them prioritize
72      which ones to review and which ones are ok to let go.
73
74   2) For driver (not subsystem) bindings: If you are comfortable with the
75      binding, and it hasn't received an Acked-by from the devicetree
76      maintainers after a few weeks, go ahead and take it.
77
78      Subsystem bindings (anything affecting more than a single device)
79      then getting a devicetree maintainer to review it is required.
80
81   3) For a series going though multiple trees, the binding patch should be
82      kept with the driver using the binding.
83
84 III. Notes
85 ==========
86
87   0) Please see ...bindings/ABI.txt for details regarding devicetree ABI.
88
89   1) This document is intended as a general familiarization with the process as
90      decided at the 2013 Kernel Summit.  When in doubt, the current word of the
91      devicetree maintainers overrules this document.  In that situation, a patch
92      updating this document would be appreciated.