cgroup: Fix memory leak when parsing multiple source parameters

[linux-2.6-microblaze.git] / Documentation / devicetree / bindings / sound / audio-graph-card.txt

Audio Graph Card:

Audio Graph Card specifies audio DAI connections of SoC <-> codec.
It is based on common bindings for device graphs.
see ${LINUX}/Documentation/devicetree/bindings/graph.txt

Basically, Audio Graph Card property is same as Simple Card.
see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.yaml

Below are same as Simple-Card.

- label
- widgets
- routing
- dai-format
- frame-master
- bitclock-master
- bitclock-inversion
- frame-inversion
- mclk-fs
- hp-det-gpio
- mic-det-gpio
- dai-tdm-slot-num
- dai-tdm-slot-width
- clocks / system-clock-frequency

Required properties:

- compatible                            : "audio-graph-card";
- dais                                  : list of CPU DAI port{s}

Optional properties:
- pa-gpios: GPIO used to control external amplifier.

-----------------------
Example: Single DAI case
-----------------------

        sound_card {
                compatible = "audio-graph-card";

                dais = <&cpu_port>;
        };

        dai-controller {
                ...
                cpu_port: port {
                        cpu_endpoint: endpoint {
                                remote-endpoint = <&codec_endpoint>;

                                dai-format = "left_j";
                                ...
                        };
                };
        };

        audio-codec {
                ...
                port {
                        codec_endpoint: endpoint {
                                remote-endpoint = <&cpu_endpoint>;
                        };
                };
        };

-----------------------
Example: Multi DAI case
-----------------------

        sound-card {
                compatible = "audio-graph-card";

                label = "sound-card";

                dais = <&cpu_port0
                        &cpu_port1
                        &cpu_port2>;
        };

        audio-codec@0 {
                ...
                port {
                        codec0_endpoint: endpoint {
                                remote-endpoint = <&cpu_endpoint0>;
                        };
                };
        };

        audio-codec@1 {
                ...
                port {
                        codec1_endpoint: endpoint {
                                remote-endpoint = <&cpu_endpoint1>;
                        };
                };
        };

        audio-codec@2 {
                ...
                port {
                        codec2_endpoint: endpoint {
                                remote-endpoint = <&cpu_endpoint2>;
                        };
                };
        };

        dai-controller {
                ...
                ports {
                        cpu_port0: port@0 {
                                cpu_endpoint0: endpoint {
                                        remote-endpoint = <&codec0_endpoint>;

                                        dai-format = "left_j";
                                        ...
                                };
                        };
                        cpu_port1: port@1 {
                                cpu_endpoint1: endpoint {
                                        remote-endpoint = <&codec1_endpoint>;

                                        dai-format = "i2s";
                                        ...
                                };
                        };
                        cpu_port2: port@2 {
                                cpu_endpoint2: endpoint {
                                        remote-endpoint = <&codec2_endpoint>;

                                        dai-format = "i2s";
                                        ...
                                };
                        };
                };
        };


-----------------------
Example: Sampling Rate Conversion
-----------------------

        sound_card {
                compatible = "audio-graph-card";

                label = "sound-card";
                prefix = "codec";
                routing = "codec Playback", "DAI0 Playback",
                          "DAI0 Capture",   "codec Capture";
                convert-rate = <48000>;

                dais = <&cpu_port>;
        };

        audio-codec {
                ...
                port {
                        codec_endpoint: endpoint {
                                remote-endpoint = <&cpu_endpoint>;
                        };
                };
        };

        dai-controller {
                ...
                cpu_port: port {
                        cpu_endpoint: endpoint {
                                remote-endpoint = <&codec_endpoint>;

                                dai-format = "left_j";
                                ...
                        };
                };
        };

-----------------------
Example: 2 CPU 1 Codec (Mixing)
-----------------------

        sound_card {
                compatible = "audio-graph-card";

                label = "sound-card";
                routing = "codec Playback", "DAI0 Playback",
                          "codec Playback", "DAI1 Playback",
                          "DAI0 Capture",   "codec Capture";

                dais = <&cpu_port>;
        };

        audio-codec {
                ...

                audio-graph-card,prefix = "codec";
                audio-graph-card,convert-rate = <48000>;
                port {
                        reg = <0>;
                        codec_endpoint0: endpoint@0 {
                                remote-endpoint = <&cpu_endpoint0>;
                        };
                        codec_endpoint1: endpoint@1 {
                                remote-endpoint = <&cpu_endpoint1>;
                        };
                };
        };

        dai-controller {
                ...
                cpu_port: port {
                        cpu_endpoint0: endpoint@0 {
                                remote-endpoint = <&codec_endpoint0>;

                                dai-format = "left_j";
                                ...
                        };
                        cpu_endpoint1: endpoint@1 {
                                remote-endpoint = <&codec_endpoint1>;

                                dai-format = "left_j";
                                ...
                        };
                };
        };

-----------------------
Example: Multi DAI with DPCM
-----------------------

        CPU0 ------ ak4613
        CPU1 ------ HDMI
        CPU2 ------ PCM3168A-p  /* DPCM 1ch/2ch */
        CPU3 --/                /* DPCM 3ch/4ch */
        CPU4 --/                /* DPCM 5ch/6ch */
        CPU5 --/                /* DPCM 7ch/8ch */
        CPU6 ------ PCM3168A-c

        sound_card: sound {
                compatible = "audio-graph-card";

                label = "sound-card";

                routing =       "pcm3168a Playback", "DAI2 Playback",
                                "pcm3168a Playback", "DAI3 Playback",
                                "pcm3168a Playback", "DAI4 Playback",
                                "pcm3168a Playback", "DAI5 Playback";

                dais = <&snd_port0      /* ak4613 */
                        &snd_port1      /* HDMI0  */
                        &snd_port2      /* pcm3168a playback */
                        &snd_port3      /* pcm3168a capture  */
                        >;
        };

        ak4613: codec@10 {
                ...
                port {
                        ak4613_endpoint: endpoint {
                                remote-endpoint = <&rsnd_endpoint0>;
                        };
                };
        };

        pcm3168a: audio-codec@44 {
                ...
                audio-graph-card,prefix = "pcm3168a";
                audio-graph-card,convert-channels = <8>; /* TDM Split */
                ports {
                        port@0 {
                                reg = <0>;
                                pcm3168a_endpoint_p1: endpoint@1 {
                                        remote-endpoint = <&rsnd_endpoint2>;
                                        ...
                                };
                                pcm3168a_endpoint_p2: endpoint@2 {
                                        remote-endpoint = <&rsnd_endpoint3>;
                                        ...
                                };
                                pcm3168a_endpoint_p3: endpoint@3 {
                                        remote-endpoint = <&rsnd_endpoint4>;
                                        ...
                                };
                                pcm3168a_endpoint_p4: endpoint@4 {
                                        remote-endpoint = <&rsnd_endpoint5>;
                                        ...
                                };
                        };
                        port@1 {
                                reg = <1>;
                                pcm3168a_endpoint_c: endpoint {
                                        remote-endpoint = <&rsnd_endpoint6>;
                                        ...
                                };
                        };
                };
        };

        &sound {
                ports {
                        snd_port0: port@0 {
                                rsnd_endpoint0: endpoint {
                                        remote-endpoint = <&ak4613_endpoint>;
                                        ...
                                };
                        };
                        snd_port1: port@1 {
                                rsnd_endpoint1: endpoint {
                                        remote-endpoint = <&dw_hdmi0_snd_in>;
                                        ...
                                };
                        };
                        snd_port2: port@2 {
                                #address-cells = <1>;
                                #size-cells = <0>;
                                rsnd_endpoint2: endpoint@2 {
                                        remote-endpoint = <&pcm3168a_endpoint_p1>;
                                        ...
                                };
                                rsnd_endpoint3: endpoint@3 {
                                        remote-endpoint = <&pcm3168a_endpoint_p2>;
                                        ...
                                };
                                rsnd_endpoint4: endpoint@4 {
                                        remote-endpoint = <&pcm3168a_endpoint_p3>;
                                        ...
                                };
                                rsnd_endpoint5: endpoint@5 {
                                        remote-endpoint = <&pcm3168a_endpoint_p4>;
                                        ...
                                };
                        };
                        snd_port3: port@6 {
                                rsnd_endpoint6: endpoint {
                                        remote-endpoint = <&pcm3168a_endpoint_c>;
                                        ...
                                };
                        };
                };
        };