Merge tag 'ntb-5.11' of git://github.com/jonmason/ntb
[linux-2.6-microblaze.git] / Documentation / devicetree / bindings / net / qcom,ipa.yaml
1 # SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
2 %YAML 1.2
3 ---
4 $id: http://devicetree.org/schemas/net/qcom,ipa.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
6
7 title: Qualcomm IP Accelerator (IPA)
8
9 maintainers:
10   - Alex Elder <elder@kernel.org>
11
12 description:
13   This binding describes the Qualcomm IPA.  The IPA is capable of offloading
14   certain network processing tasks (e.g. filtering, routing, and NAT) from
15   the main processor.
16
17   The IPA sits between multiple independent "execution environments,"
18   including the Application Processor (AP) and the modem.  The IPA presents
19   a Generic Software Interface (GSI) to each execution environment.
20   The GSI is an integral part of the IPA, but it is logically isolated
21   and has a distinct interrupt and a separately-defined address space.
22
23   See also soc/qcom/qcom,smp2p.txt and interconnect/interconnect.txt.  See
24   iommu/iommu.txt and iommu/arm,smmu.yaml for more information about SMMU
25   bindings.
26
27
28   - |
29     --------             ---------
30     |      |             |       |
31     |  AP  +<---.   .----+ Modem |
32     |      +--. |   | .->+       |
33     |      |  | |   | |  |       |
34     --------  | |   | |  ---------
35               v |   v |
36             --+-+---+-+--
37             |    GSI    |
38             |-----------|
39             |           |
40             |    IPA    |
41             |           |
42             -------------
43
44 properties:
45   compatible:
46     const: "qcom,sdm845-ipa"
47
48   reg:
49     items:
50       - description: IPA registers
51       - description: IPA shared memory
52       - description: GSI registers
53
54   reg-names:
55     items:
56       - const: ipa-reg
57       - const: ipa-shared
58       - const: gsi
59
60   iommus:
61     maxItems: 1
62
63   clocks:
64     maxItems: 1
65
66   clock-names:
67     const: core
68
69   interrupts:
70     items:
71       - description: IPA interrupt (hardware IRQ)
72       - description: GSI interrupt (hardware IRQ)
73       - description: Modem clock query interrupt (smp2p interrupt)
74       - description: Modem setup ready interrupt (smp2p interrupt)
75
76   interrupt-names:
77     items:
78       - const: ipa
79       - const: gsi
80       - const: ipa-clock-query
81       - const: ipa-setup-ready
82
83   interconnects:
84     items:
85       - description: Interconnect path between IPA and main memory
86       - description: Interconnect path between IPA and internal memory
87       - description: Interconnect path between IPA and the AP subsystem
88
89   interconnect-names:
90     items:
91       - const: memory
92       - const: imem
93       - const: config
94
95   qcom,smem-states:
96     $ref: /schemas/types.yaml#/definitions/phandle-array
97     description: State bits used in by the AP to signal the modem.
98     items:
99       - description: Whether the "ipa-clock-enabled" state bit is valid
100       - description: Whether the IPA clock is enabled (if valid)
101
102   qcom,smem-state-names:
103     $ref: /schemas/types.yaml#/definitions/string-array
104     description: The names of the state bits used for SMP2P output
105     items:
106       - const: ipa-clock-enabled-valid
107       - const: ipa-clock-enabled
108
109   modem-init:
110     type: boolean
111     description:
112       If present, it indicates that the modem is responsible for
113       performing early IPA initialization, including loading and
114       validating firwmare used by the GSI.
115
116   modem-remoteproc:
117     $ref: /schemas/types.yaml#/definitions/phandle
118     description:
119       This defines the phandle to the remoteproc node representing
120       the modem subsystem.  This is requied so the IPA driver can
121       receive and act on notifications of modem up/down events.
122
123   memory-region:
124     maxItems: 1
125     description:
126       If present, a phandle for a reserved memory area that holds
127       the firmware passed to Trust Zone for authentication.  Required
128       when Trust Zone (not the modem) performs early initialization.
129
130 required:
131   - compatible
132   - iommus
133   - reg
134   - clocks
135   - interrupts
136   - interconnects
137   - qcom,smem-states
138   - modem-remoteproc
139
140 oneOf:
141   - required:
142       - modem-init
143   - required:
144       - memory-region
145
146 additionalProperties: false
147
148 examples:
149   - |
150         #include <dt-bindings/interrupt-controller/irq.h>
151         #include <dt-bindings/clock/qcom,rpmh.h>
152         #include <dt-bindings/interconnect/qcom,sdm845.h>
153
154         smp2p-mpss {
155                 compatible = "qcom,smp2p";
156                 ipa_smp2p_out: ipa-ap-to-modem {
157                         qcom,entry-name = "ipa";
158                         #qcom,smem-state-cells = <1>;
159                 };
160
161                 ipa_smp2p_in: ipa-modem-to-ap {
162                         qcom,entry-name = "ipa";
163                         interrupt-controller;
164                         #interrupt-cells = <2>;
165                 };
166         };
167         ipa@1e40000 {
168                 compatible = "qcom,sdm845-ipa";
169
170                 modem-init;
171                 modem-remoteproc = <&mss_pil>;
172
173                 iommus = <&apps_smmu 0x720 0x3>;
174                 reg = <0x1e40000 0x7000>,
175                         <0x1e47000 0x2000>,
176                         <0x1e04000 0x2c000>;
177                 reg-names = "ipa-reg",
178                             "ipa-shared",
179                             "gsi";
180
181                 interrupts-extended = <&intc 0 311 IRQ_TYPE_EDGE_RISING>,
182                                       <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>,
183                                       <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
184                                       <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
185                 interrupt-names = "ipa",
186                                   "gsi",
187                                   "ipa-clock-query",
188                                   "ipa-setup-ready";
189
190                 clocks = <&rpmhcc RPMH_IPA_CLK>;
191                 clock-names = "core";
192
193                 interconnects =
194                         <&rsc_hlos MASTER_IPA &rsc_hlos SLAVE_EBI1>,
195                         <&rsc_hlos MASTER_IPA &rsc_hlos SLAVE_IMEM>,
196                         <&rsc_hlos MASTER_APPSS_PROC &rsc_hlos SLAVE_IPA_CFG>;
197                 interconnect-names = "memory",
198                                      "imem",
199                                      "config";
200
201                 qcom,smem-states = <&ipa_smp2p_out 0>,
202                                    <&ipa_smp2p_out 1>;
203                 qcom,smem-state-names = "ipa-clock-enabled-valid",
204                                         "ipa-clock-enabled";
205         };