kyber: make trace_block_rq call consistent with documentation
[linux-2.6-microblaze.git] / Documentation / devicetree / bindings / mtd / ti,am654-hbmc.txt
1 Bindings for HyperBus Memory Controller (HBMC) on TI's K3 family of SoCs
2
3 Required properties:
4 - compatible : "ti,am654-hbmc" for AM654 SoC
5 - reg : Two entries:
6         First entry pointed to the register space of HBMC controller
7         Second entry pointing to the memory map region dedicated for
8         MMIO access to attached flash devices
9 - ranges : Address translation from offset within CS to allocated MMIO
10            space in SoC
11
12 Optional properties:
13 - mux-controls : phandle to the multiplexer that controls selection of
14                  HBMC vs OSPI inside Flash SubSystem (FSS). Default is OSPI,
15                  if property is absent.
16                  See Documentation/devicetree/bindings/mux/reg-mux.txt
17                  for mmio-mux binding details
18
19 Example:
20
21         system-controller@47000000 {
22                 compatible = "syscon", "simple-mfd";
23                 reg = <0x0 0x47000000 0x0 0x100>;
24                 #address-cells = <2>;
25                 #size-cells = <2>;
26                 ranges;
27
28                 hbmc_mux: multiplexer {
29                         compatible = "mmio-mux";
30                         #mux-control-cells = <1>;
31                         mux-reg-masks = <0x4 0x2>; /* 0: reg 0x4, bit 1 */
32                 };
33         };
34
35         hbmc: hyperbus@47034000 {
36                 compatible = "ti,am654-hbmc";
37                 reg = <0x0 0x47034000 0x0 0x100>,
38                         <0x5 0x00000000 0x1 0x0000000>;
39                 power-domains = <&k3_pds 55>;
40                 #address-cells = <2>;
41                 #size-cells = <1>;
42                 ranges = <0x0 0x0 0x5 0x00000000 0x4000000>, /* CS0 - 64MB */
43                          <0x1 0x0 0x5 0x04000000 0x4000000>; /* CS1 - 64MB */
44                 mux-controls = <&hbmc_mux 0>;
45
46                 /* Slave flash node */
47                 flash@0,0 {
48                         compatible = "cypress,hyperflash", "cfi-flash";
49                         reg = <0x0 0x0 0x4000000>;
50                 };
51         };