fscache: Use refcount_t for the cookie refcount instead of atomic_t
[linux-2.6-microblaze.git] / Documentation / devicetree / bindings / memory-controllers / exynos5422-dmc.txt
1 * Exynos5422 frequency and voltage scaling for Dynamic Memory Controller device
2
3 The Samsung Exynos5422 SoC has DMC (Dynamic Memory Controller) to which the DRAM
4 memory chips are connected. The driver is to monitor the controller in runtime
5 and switch frequency and voltage. To monitor the usage of the controller in
6 runtime, the driver uses the PPMU (Platform Performance Monitoring Unit), which
7 is able to measure the current load of the memory.
8 When 'userspace' governor is used for the driver, an application is able to
9 switch the DMC and memory frequency.
10
11 Required properties for DMC device for Exynos5422:
12 - compatible: Should be "samsung,exynos5422-dmc".
13 - clocks : list of clock specifiers, must contain an entry for each
14   required entry in clock-names for CLK_FOUT_SPLL, CLK_MOUT_SCLK_SPLL,
15   CLK_FF_DOUT_SPLL2, CLK_FOUT_BPLL, CLK_MOUT_BPLL, CLK_SCLK_BPLL,
16   CLK_MOUT_MX_MSPLL_CCORE, CLK_MOUT_MX_MSPLL_CCORE_PHY, CLK_MOUT_MCLK_CDREX,
17 - clock-names : should include "fout_spll", "mout_sclk_spll", "ff_dout_spll2",
18   "fout_bpll", "mout_bpll", "sclk_bpll", "mout_mx_mspll_ccore",
19   "mout_mclk_cdrex"  entries
20 - devfreq-events : phandles for PPMU devices connected to this DMC.
21 - vdd-supply : phandle for voltage regulator which is connected.
22 - reg : registers of two CDREX controllers.
23 - operating-points-v2 : phandle for OPPs described in v2 definition.
24 - device-handle : phandle of the connected DRAM memory device. For more
25         information please refer to documentation file:
26         Documentation/devicetree/bindings/ddr/lpddr3.txt
27 - devfreq-events : phandles of the PPMU events used by the controller.
28 - samsung,syscon-clk : phandle of the clock register set used by the controller,
29         these registers are used for enabling a 'pause' feature and are not
30         exposed by clock framework but they must be used in a safe way.
31         The register offsets are in the driver code and specyfic for this SoC
32         type.
33
34 Optional properties for DMC device for Exynos5422:
35 - interrupt-parent : The parent interrupt controller.
36 - interrupts : Contains the IRQ line numbers for the DMC internal performance
37   event counters in DREX0 and DREX1 channels. Align with specification of the
38   interrupt line(s) in the interrupt-parent controller.
39 - interrupt-names : IRQ names "drex_0" and "drex_1", the order should be the
40   same as in the 'interrupts' list above.
41
42 Example:
43
44         ppmu_dmc0_0: ppmu@10d00000 {
45                 compatible = "samsung,exynos-ppmu";
46                 reg = <0x10d00000 0x2000>;
47                 clocks = <&clock CLK_PCLK_PPMU_DREX0_0>;
48                 clock-names = "ppmu";
49                 events {
50                         ppmu_event_dmc0_0: ppmu-event3-dmc0_0 {
51                                 event-name = "ppmu-event3-dmc0_0";
52                         };
53                 };
54         };
55
56         dmc: memory-controller@10c20000 {
57                 compatible = "samsung,exynos5422-dmc";
58                 reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>;
59                 clocks = <&clock CLK_FOUT_SPLL>,
60                          <&clock CLK_MOUT_SCLK_SPLL>,
61                          <&clock CLK_FF_DOUT_SPLL2>,
62                          <&clock CLK_FOUT_BPLL>,
63                          <&clock CLK_MOUT_BPLL>,
64                          <&clock CLK_SCLK_BPLL>,
65                          <&clock CLK_MOUT_MX_MSPLL_CCORE>,
66                          <&clock CLK_MOUT_MCLK_CDREX>;
67                 clock-names = "fout_spll",
68                               "mout_sclk_spll",
69                               "ff_dout_spll2",
70                               "fout_bpll",
71                               "mout_bpll",
72                               "sclk_bpll",
73                               "mout_mx_mspll_ccore",
74                               "mout_mclk_cdrex";
75                 operating-points-v2 = <&dmc_opp_table>;
76                 devfreq-events = <&ppmu_event3_dmc0_0>, <&ppmu_event3_dmc0_1>,
77                                  <&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>;
78                 device-handle = <&samsung_K3QF2F20DB>;
79                 vdd-supply = <&buck1_reg>;
80                 samsung,syscon-clk = <&clock>;
81                 interrupt-parent = <&combiner>;
82                 interrupts = <16 0>, <16 1>;
83                 interrupt-names = "drex_0", "drex_1";
84         };