Merge commit '81fd23e2b3ccf71c807e671444e8accaba98ca53' of https://git.pengutronix...
[linux-2.6-microblaze.git] / Documentation / devicetree / bindings / input / touchscreen / edt-ft5x06.yaml
1 # SPDX-License-Identifier: GPL-2.0
2 %YAML 1.2
3 ---
4 $id: http://devicetree.org/schemas/input/touchscreen/edt-ft5x06.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
6
7 title: FocalTech EDT-FT5x06 Polytouch Bindings
8
9 description: |
10              There are 5 variants of the chip for various touch panel sizes
11               FT5206GE1  2.8" .. 3.8"
12               FT5306DE4  4.3" .. 7"
13               FT5406EE8  7"   .. 8.9"
14               FT5506EEG  7"   .. 8.9"
15               FT5726NEI  5.7” .. 11.6"
16
17 maintainers:
18   - Dmitry Torokhov <dmitry.torokhov@gmail.com>
19
20 allOf:
21   - $ref: touchscreen.yaml#
22   - if:
23       properties:
24         compatible:
25           contains:
26             enum:
27               - evervision,ev-ft5726
28
29     then:
30       properties:
31         offset-x: true
32         offset-y: true
33
34 properties:
35   compatible:
36     enum:
37       - edt,edt-ft5206
38       - edt,edt-ft5306
39       - edt,edt-ft5406
40       - edt,edt-ft5506
41       - evervision,ev-ft5726
42       - focaltech,ft6236
43
44   reg:
45     maxItems: 1
46
47   interrupts:
48     maxItems: 1
49
50   reset-gpios:
51     maxItems: 1
52
53   wake-gpios:
54     maxItems: 1
55
56   wakeup-source: true
57
58   vcc-supply: true
59   iovcc-supply: true
60
61   gain:
62     description: Allows setting the sensitivity in the range from 0 to 31.
63                  Note that lower values indicate higher sensitivity.
64     $ref: /schemas/types.yaml#/definitions/uint32
65     minimum: 0
66     maximum: 31
67
68   offset:
69     description: Allows setting the edge compensation in the range from 0 to 31.
70     $ref: /schemas/types.yaml#/definitions/uint32
71     minimum: 0
72     maximum: 31
73
74   offset-x:
75     description: Same as offset, but applies only to the horizontal position.
76                  Range from 0 to 80, only supported by evervision,ev-ft5726 devices.
77     $ref: /schemas/types.yaml#/definitions/uint32
78     minimum: 0
79     maximum: 80
80
81   offset-y:
82     description: Same as offset, but applies only to the vertical position.
83                  Range from 0 to 80, only supported by evervision,ev-ft5726 devices.
84     $ref: /schemas/types.yaml#/definitions/uint32
85     minimum: 0
86     maximum: 80
87
88   touchscreen-size-x: true
89   touchscreen-size-y: true
90   touchscreen-fuzz-x: true
91   touchscreen-fuzz-y: true
92   touchscreen-inverted-x: true
93   touchscreen-inverted-y: true
94   touchscreen-swapped-x-y: true
95   interrupt-controller: true
96
97 additionalProperties: false
98
99 required:
100   - compatible
101   - reg
102   - interrupts
103
104 examples:
105   - |
106     #include <dt-bindings/gpio/gpio.h>
107     #include <dt-bindings/interrupt-controller/arm-gic.h>
108     i2c {
109       #address-cells = <1>;
110       #size-cells = <0>;
111       edt-ft5x06@38 {
112         compatible = "edt,edt-ft5406";
113         reg = <0x38>;
114         interrupt-parent = <&gpio2>;
115         interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
116         reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
117         wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
118       };
119     };
120
121 ...