Documentation/devicetree/bindings/iio/light/uvis25.txt

   1 * ST UVIS25 uv sensor
   2
   3 Required properties:
   4 - compatible: should be "st,uvis25"
   5 - reg: i2c address of the sensor / spi cs line
   6
   7 Optional properties:
   8 - interrupts: interrupt mapping for IRQ. It should be configured with
   9   flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
  10   IRQ_TYPE_EDGE_FALLING.
  11
  12   Refer to interrupt-controller/interrupts.txt for generic interrupt
  13   client node bindings.
  14
  15 Example:
  16
  17 uvis25@47 {
  18         compatible = "st,uvis25";
  19         reg = <0x47>;
  20         interrupt-parent = <&gpio0>;
  21         interrupts = <0 IRQ_TYPE_EDGE_RISING>;
  22 };