Documentation/devicetree/bindings/gpio/gpio-davinci.txt

   1 Davinci/Keystone GPIO controller bindings
   2
   3 Required Properties:
   4 - compatible: should be "ti,dm6441-gpio": for Davinci da850 SoCs
   5                         "ti,keystone-gpio": for Keystone 2 66AK2H/K, 66AK2L,
   6                                                 66AK2E SoCs
   7                         "ti,k2g-gpio", "ti,keystone-gpio": for 66AK2G
   8                         "ti,am654-gpio", "ti,keystone-gpio": for TI K3 AM654
   9                         "ti,j721e-gpio", "ti,keystone-gpio": for J721E SoCs
  10                         "ti,am64-gpio", "ti,keystone-gpio": for AM64 SoCs
  11
  12 - reg: Physical base address of the controller and the size of memory mapped
  13        registers.
  14
  15 - gpio-controller : Marks the device node as a gpio controller.
  16
  17 - #gpio-cells : Should be two.
  18   - first cell is the pin number
  19   - second cell is used to specify optional parameters (unused)
  20
  21 - interrupts: Array of GPIO interrupt number. Only banked or unbanked IRQs are
  22               supported at a time.
  23
  24 - ti,ngpio: The number of GPIO pins supported.
  25
  26 - ti,davinci-gpio-unbanked: The number of GPIOs that have an individual interrupt
  27                             line to processor.
  28
  29 - clocks: Should contain the device's input clock, and should be defined as per
  30           the appropriate clock bindings consumer usage in,
  31
  32           Documentation/devicetree/bindings/clock/keystone-gate.txt
  33                             for 66AK2HK/66AK2L/66AK2E SoCs or,
  34
  35           Documentation/devicetree/bindings/clock/ti,sci-clk.txt
  36                             for 66AK2G SoCs
  37
  38 - clock-names: Name should be "gpio";
  39
  40 Currently clock-names and clocks are needed for all keystone 2 platforms
  41 Davinci platforms do not have DT clocks as of now.
  42
  43 The GPIO controller also acts as an interrupt controller. It uses the default
  44 two cells specifier as described in Documentation/devicetree/bindings/
  45 interrupt-controller/interrupts.txt.
  46
  47 Example:
  48
  49 gpio: gpio@1e26000 {
  50         compatible = "ti,dm6441-gpio";
  51         gpio-controller;
  52         #gpio-cells = <2>;
  53         reg = <0x226000 0x1000>;
  54         interrupt-parent = <&intc>;
  55         interrupts = <42 IRQ_TYPE_EDGE_BOTH 43 IRQ_TYPE_EDGE_BOTH
  56                 44 IRQ_TYPE_EDGE_BOTH 45 IRQ_TYPE_EDGE_BOTH
  57                 46 IRQ_TYPE_EDGE_BOTH 47 IRQ_TYPE_EDGE_BOTH
  58                 48 IRQ_TYPE_EDGE_BOTH 49 IRQ_TYPE_EDGE_BOTH
  59                 50 IRQ_TYPE_EDGE_BOTH>;
  60         ti,ngpio = <144>;
  61         ti,davinci-gpio-unbanked = <0>;
  62         interrupt-controller;
  63         #interrupt-cells = <2>;
  64 };
  65
  66 leds {
  67         compatible = "gpio-leds";
  68
  69         led1 {
  70                 label = "davinci:green:usr1";
  71                 gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
  72                 ...
  73         };
  74
  75         led2 {
  76                 label = "davinci:red:debug1";
  77                 gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
  78                 ...
  79         };
  80 };
  81
  82 Example for 66AK2G:
  83
  84 gpio0: gpio@2603000 {
  85         compatible = "ti,k2g-gpio", "ti,keystone-gpio";
  86         reg = <0x02603000 0x100>;
  87         gpio-controller;
  88         #gpio-cells = <2>;
  89         interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
  90                         <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
  91                         <GIC_SPI 434 IRQ_TYPE_EDGE_RISING>,
  92                         <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>,
  93                         <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
  94                         <GIC_SPI 437 IRQ_TYPE_EDGE_RISING>,
  95                         <GIC_SPI 438 IRQ_TYPE_EDGE_RISING>,
  96                         <GIC_SPI 439 IRQ_TYPE_EDGE_RISING>,
  97                         <GIC_SPI 440 IRQ_TYPE_EDGE_RISING>;
  98         interrupt-controller;
  99         #interrupt-cells = <2>;
 100         ti,ngpio = <144>;
 101         ti,davinci-gpio-unbanked = <0>;
 102         clocks = <&k2g_clks 0x001b 0x0>;
 103         clock-names = "gpio";
 104 };
 105
 106 Example for 66AK2HK/66AK2L/66AK2E:
 107
 108 gpio0: gpio@260bf00 {
 109         compatible = "ti,keystone-gpio";
 110         reg = <0x0260bf00 0x100>;
 111         gpio-controller;
 112         #gpio-cells = <2>;
 113         /* HW Interrupts mapped to GPIO pins */
 114         interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>,
 115                         <GIC_SPI 121 IRQ_TYPE_EDGE_RISING>,
 116                         <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
 117                         <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>,
 118                         <GIC_SPI 124 IRQ_TYPE_EDGE_RISING>,
 119                         <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
 120                         <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
 121                         <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
 122                         <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
 123                         <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
 124                         <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
 125                         <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
 126                         <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
 127                         <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
 128                         <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
 129                         <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
 130                         <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
 131                         <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
 132                         <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
 133                         <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
 134                         <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>,
 135                         <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
 136                         <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>,
 137                         <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>,
 138                         <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>,
 139                         <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
 140                         <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>,
 141                         <GIC_SPI 147 IRQ_TYPE_EDGE_RISING>,
 142                         <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>,
 143                         <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
 144                         <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>,
 145                         <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
 146                         clocks = <&clkgpio>;
 147         clock-names = "gpio";
 148         ti,ngpio = <32>;
 149         ti,davinci-gpio-unbanked = <32>;
 150 };
 151
 152 Example for K3 AM654:
 153
 154 wkup_gpio0: wkup_gpio0@42110000 {
 155         compatible = "ti,am654-gpio", "ti,keystone-gpio";
 156         reg = <0x42110000 0x100>;
 157         gpio-controller;
 158         #gpio-cells = <2>;
 159         interrupt-parent = <&intr_wkup_gpio>;
 160         interrupts = <59 128>, <59 129>, <59 130>, <59 131>;
 161         interrupt-controller;
 162         #interrupt-cells = <2>;
 163         ti,ngpio = <56>;
 164         ti,davinci-gpio-unbanked = <0>;
 165         clocks = <&k3_clks 59 0>;
 166         clock-names = "gpio";
 167 };