Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt

   1 Rockchip specific extensions to the Synopsys Designware MIPI DSI
   2 ================================
   3
   4 Required properties:
   5 - #address-cells: Should be <1>.
   6 - #size-cells: Should be <0>.
   7 - compatible: one of
   8         "rockchip,px30-mipi-dsi", "snps,dw-mipi-dsi"
   9         "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"
  10         "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"
  11 - reg: Represent the physical address range of the controller.
  12 - interrupts: Represent the controller's interrupt to the CPU(s).
  13 - clocks, clock-names: Phandles to the controller's pll reference
  14   clock(ref) when using an internal dphy and APB clock(pclk).
  15   For RK3399, a phy config clock (phy_cfg) and a grf clock(grf)
  16   are required. As described in [1].
  17 - rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
  18 - ports: contain a port node with endpoint definitions as defined in [2].
  19   For vopb,set the reg = <0> and set the reg = <1> for vopl.
  20 - video port 0 for the VOP input, the remote endpoint maybe vopb or vopl
  21 - video port 1 for either a panel or subsequent encoder
  22
  23 Optional properties:
  24 - phys: from general PHY binding: the phandle for the PHY device.
  25 - phy-names: Should be "dphy" if phys references an external phy.
  26 - #phy-cells: Defined when used as ISP phy, should be 0.
  27 - power-domains: a phandle to mipi dsi power domain node.
  28 - resets: list of phandle + reset specifier pairs, as described in [3].
  29 - reset-names: string reset name, must be "apb".
  30
  31 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
  32 [2] Documentation/devicetree/bindings/media/video-interfaces.txt
  33 [3] Documentation/devicetree/bindings/reset/reset.txt
  34
  35 Example:
  36         mipi_dsi: mipi@ff960000 {
  37                 #address-cells = <1>;
  38                 #size-cells = <0>;
  39                 compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
  40                 reg = <0xff960000 0x4000>;
  41                 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
  42                 clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
  43                 clock-names = "ref", "pclk";
  44                 resets = <&cru SRST_MIPIDSI0>;
  45                 reset-names = "apb";
  46                 rockchip,grf = <&grf>;
  47
  48                 ports {
  49                         #address-cells = <1>;
  50                         #size-cells = <0>;
  51
  52                         mipi_in: port@0 {
  53                                 reg = <0>;
  54                                 #address-cells = <1>;
  55                                 #size-cells = <0>;
  56
  57                                 mipi_in_vopb: endpoint@0 {
  58                                         reg = <0>;
  59                                         remote-endpoint = <&vopb_out_mipi>;
  60                                 };
  61                                 mipi_in_vopl: endpoint@1 {
  62                                         reg = <1>;
  63                                         remote-endpoint = <&vopl_out_mipi>;
  64                                 };
  65                         };
  66
  67                         mipi_out: port@1 {
  68                                 reg = <1>;
  69                                 #address-cells = <1>;
  70                                 #size-cells = <0>;
  71
  72                                 mipi_out_panel: endpoint {
  73                                         remote-endpoint = <&panel_in_mipi>;
  74                                 };
  75                         };
  76                 };
  77
  78                 panel {
  79                         compatible ="boe,tv080wum-nl0";
  80                         reg = <0>;
  81
  82                         enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
  83                         pinctrl-names = "default";
  84                         pinctrl-0 = <&lcd_en>;
  85                         backlight = <&backlight>;
  86
  87                         port {
  88                                 panel_in_mipi: endpoint {
  89                                         remote-endpoint = <&mipi_out_panel>;
  90                                 };
  91                         };
  92                 };
  93         };